Merge tag 'hwmon-for-linus-v4.8' of...

Merge tag 'hwmon-for-linus-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:

 - New drivers for FTS BMC "Teutates", TI INA3221, and Sensirion SHT3x.

 - Added support for Microchip MCP9808 and TI TMP461.

 - Cleanup and minor fixes in various drivers.

* tag 'hwmon-for-linus-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (37 commits)
  Documentation: dtb: xgene: Add hwmon dts binding documentation
  hwmon: (ftsteutates) Remove unused including <linux/version.h>
  hwmon: (adt7411) set bit 3 in CFG1 register
  hwmon: Add driver for FTS BMC chip "Teutates"
  hwmon: (sht3x) add humidity heater element control
  hwmon: (jc42) Add support for generic JC-42.4 devicetree binding
  dt/bindings: Add bindings for JC-42.4 compatible temperature sensors
  hwmon: (tmp102) Convert to use regmap, and drop local cache
  hwmon: (tmp102) Rework chip configuration
  hwmon: (tmp102) Improve handling of initial read delay
  hwmon: (lm90) Drop unnecessary else statements
  hwmon: (lm90) Use bool for valid flag
  hwmon: (lm90) Read limit registers only once
  hwmon: (lm90) Simplify read functions
  hwmon: (lm90) Use devm_hwmon_device_register_with_groups
  hwmon: (lm90) Use devm_add_action for cleanup
  hwmon: (lm75) Convert to use regmap
  hwmon: (lm75) Add update_interval attribute
  hwmon: (lm75) Drop lm75_read_value and lm75_write_value
  hwmon: (lm75) Handle cleanup with devm_add_action
  ...

Documentation/devicetree/bindings/hwmon/apm-xgene-hwmon.txt

+APM X-Gene hwmon driver
+
+APM X-Gene SOC sensors are accessed over the "SLIMpro" mailbox.
+
+Required properties :
+ - compatible : should be "apm,xgene-slimpro-hwmon"
+ - mboxes : use the label reference for the mailbox as the first parameter.
+	    The second parameter is the channel number.
+
+Example :
+	hwmonslimpro {
+		compatible = "apm,xgene-slimpro-hwmon";
+		mboxes = <&mailbox 7>;
+	};

Documentation/devicetree/bindings/hwmon/jc42.txt

+Properties for Jedec JC-42.4 compatible temperature sensors
+
+Required properties:
+- compatible: May include a device-specific string consisting of the
+	      manufacturer and the name of the chip. A list of supported
+	      chip names follows.
+	      Must include "jedec,jc-42.4-temp" for any Jedec JC-42.4
+	      compatible temperature sensor.
+
+	      Supported chip names:
+		adi,adt7408
+		atmel,at30ts00
+		atmel,at30tse004
+		onnn,cat6095
+		onnn,cat34ts02
+		maxim,max6604
+		microchip,mcp9804
+		microchip,mcp9805
+		microchip,mcp9808
+		microchip,mcp98243
+		microchip,mcp98244
+		microchip,mcp9843
+		nxp,se97
+		nxp,se98
+		st,stts2002
+		st,stts2004
+		st,stts3000
+		st,stts424
+		st,stts424e
+		idt,tse2002
+		idt,tse2004
+		idt,ts3000
+		idt,ts3001
+
+- reg: I2C address
+
+Example:
+
+temp-sensor@1a {
+	compatible = "jedec,jc-42.4-temp";
+	reg = <0x1a>;
+};

Documentation/hwmon/abituguru

@@ -24,7 +24,7 @@ Supported chips:
 				 AW9D-MAX) (2)
 	1) For revisions 2 and 3 uGuru's the driver can autodetect the
 	   sensortype (Volt or Temp) for bank1 sensors, for revision 1 uGuru's
-	   this doesnot always work. For these uGuru's the autodection can
+	   this does not always work. For these uGuru's the autodetection can
 	   be overridden with the bank1_types module param. For all 3 known
 	   revison 1 motherboards the correct use of this param is:
 	   bank1_types=1,1,0,0,0,0,0,2,0,0,0,0,2,0,0,1

Documentation/hwmon/ftsteutates

+Kernel driver ftsteutates
+=====================
+
+Supported chips:
+  * FTS Teutates
+    Prefix: 'ftsteutates'
+    Addresses scanned: I2C 0x73 (7-Bit)
+
+Author: Thilo Cestonaro <thilo.cestonaro@ts.fujitsu.com>
+
+
+Description
+-----------
+The BMC Teutates is the Eleventh generation of Superior System
+monitoring and thermal management solution. It is builds on the basic
+functionality of the BMC Theseus and contains several new features and
+enhancements. It can monitor up to 4 voltages, 16 temperatures and
+8 fans. It also contains an integrated watchdog which is currently
+implemented in this driver.
+
+Specification of the chip can be found here:
+ftp:///pub/Mainboard-OEM-Sales/Services/Software&Tools/Linux_SystemMonitoring&Watchdog&GPIO/BMC-Teutates_Specification_V1.21.pdf
+ftp:///pub/Mainboard-OEM-Sales/Services/Software&Tools/Linux_SystemMonitoring&Watchdog&GPIO/Fujitsu_mainboards-1-Sensors_HowTo-en-US.pdf

Documentation/hwmon/ina3221

+Kernel driver ina3221
+=====================
+
+Supported chips:
+  * Texas Instruments INA3221
+    Prefix: 'ina3221'
+    Addresses: I2C 0x40 - 0x43
+    Datasheet: Publicly available at the Texas Instruments website
+               http://www.ti.com/
+
+Author: Andrew F. Davis <afd@ti.com>
+
+Description
+-----------
+
+The Texas Instruments INA3221 monitors voltage, current, and power on the high
+side of up to three D.C. power supplies. The INA3221 monitors both shunt drop
+and supply voltage, with programmable conversion times and averaging, current
+and power are calculated host-side from these.
+
+Sysfs entries
+-------------
+
+in[123]_input           Bus voltage(mV) channels
+curr[123]_input         Current(mA) measurement channels
+shunt[123]_resistor     Shunt resistance(uOhm) channels
+curr[123]_crit          Critical alert current(mA) setting, activates the
+                          corresponding alarm when the respective current
+                          is above this value
+curr[123]_crit_alarm    Critical alert current limit exceeded
+curr[123]_max           Warning alert current(mA) setting, activates the
+                          corresponding alarm when the respective current
+                          average is above this value.
+curr[123]_max_alarm     Warning alert current limit exceeded
+in[456]_input           Shunt voltage(uV) for channels 1, 2, and 3 respectively

Documentation/hwmon/jc42

@@ -18,10 +18,11 @@ Supported chips:
   * Maxim MAX6604
     Datasheets:
 	http://datasheets.maxim-ic.com/en/ds/MAX6604.pdf
-  * Microchip MCP9804, MCP9805, MCP98242, MCP98243, MCP98244, MCP9843
+  * Microchip MCP9804, MCP9805, MCP9808, MCP98242, MCP98243, MCP98244, MCP9843
     Datasheets:
 	http://ww1.microchip.com/downloads/en/DeviceDoc/22203C.pdf
 	http://ww1.microchip.com/downloads/en/DeviceDoc/21977b.pdf
+	http://ww1.microchip.com/downloads/en/DeviceDoc/25095A.pdf
 	http://ww1.microchip.com/downloads/en/DeviceDoc/21996a.pdf
 	http://ww1.microchip.com/downloads/en/DeviceDoc/22153c.pdf
 	http://ww1.microchip.com/downloads/en/DeviceDoc/22327A.pdf

Documentation/hwmon/max1668

@@ -17,7 +17,7 @@ This driver implements support for the Maxim MAX1668, MAX1805 and MAX1989
 chips.
 
 The three devices are very similar, but the MAX1805 has a reduced feature
-set; only two remote temperature inputs vs the four avaible on the other
+set; only two remote temperature inputs vs the four available on the other
 two ICs.
 
 The driver is able to distinguish between the devices and creates sysfs

Documentation/hwmon/sht3x

+Kernel driver sht3x
+===================
+
+Supported chips:
+  * Sensirion SHT3x-DIS
+    Prefix: 'sht3x'
+    Addresses scanned: none
+    Datasheet: http://www.sensirion.com/fileadmin/user_upload/customers/sensirion/Dokumente/Humidity/Sensirion_Humidity_Datasheet_SHT3x_DIS.pdf
+
+Author:
+  David Frey <david.frey@sensirion.com>
+  Pascal Sachs <pascal.sachs@sensirion.com>
+
+Description
+-----------
+
+This driver implements support for the Sensirion SHT3x-DIS chip, a humidity
+and temperature sensor. Temperature is measured in degrees celsius, relative
+humidity is expressed as a percentage. In the sysfs interface, all values are
+scaled by 1000, i.e. the value for 31.5 degrees celsius is 31500.
+
+The device communicates with the I2C protocol. Sensors can have the I2C
+addresses 0x44 or 0x45, depending on the wiring. See
+Documentation/i2c/instantiating-devices for methods to instantiate the device.
+
+There are two options configurable by means of sht3x_platform_data:
+1. blocking (pull the I2C clock line down while performing the measurement) or
+   non-blocking mode. Blocking mode will guarantee the fastest result but
+   the I2C bus will be busy during that time. By default, non-blocking mode
+   is used. Make sure clock-stretching works properly on your device if you
+   want to use blocking mode.
+2. high or low accuracy. High accuracy is used by default and using it is
+   strongly recommended.
+
+The sht3x sensor supports a single shot mode as well as 5 periodic measure
+modes, which can be controlled with the update_interval sysfs interface.
+The allowed update_interval in milliseconds are as follows:
+  *     0   single shot mode
+  *  2000   0.5 Hz periodic measurement
+  *  1000   1   Hz periodic measurement
+  *   500   2   Hz periodic measurement
+  *   250   4   Hz periodic measurement
+  *   100  10   Hz periodic measurement
+
+In the periodic measure mode, the sensor automatically triggers a measurement
+with the configured update interval on the chip. When a temperature or humidity
+reading exceeds the configured limits, the alert attribute is set to 1 and
+the alert pin on the sensor is set to high.
+When the temperature and humidity readings move back between the hysteresis
+values, the alert bit is set to 0 and the alert pin on the sensor is set to
+low.
+
+sysfs-Interface
+---------------
+
+temp1_input:        temperature input
+humidity1_input:    humidity input
+temp1_max:          temperature max value
+temp1_max_hyst:     temperature hysteresis value for max limit
+humidity1_max:      humidity max value
+humidity1_max_hyst: humidity hysteresis value for max limit
+temp1_min:          temperature min value
+temp1_min_hyst:     temperature hysteresis value for min limit
+humidity1_min:      humidity min value
+humidity1_min_hyst: humidity hysteresis value for min limit
+temp1_alarm:        alarm flag is set to 1 if the temperature is outside the
+                    configured limits. Alarm only works in periodic measure mode
+humidity1_alarm:    alarm flag is set to 1 if the humidity is outside the
+                    configured limits. Alarm only works in periodic measure mode
+heater_enable:      heater enable, heating element removes excess humidity from
+                    sensor
+                        0: turned off
+                        1: turned on
+update_interval:    update interval, 0 for single shot, interval in msec
+                    for periodic measurement. If the interval is not supported
+                    by the sensor, the next faster interval is chosen

Documentation/hwmon/submitting-patches

@@ -15,10 +15,15 @@ increase the chances of your change being accepted.
     Documentation/SubmittingPatches
     Documentation/CodingStyle
 
-* If your patch generates checkpatch warnings, please refrain from explanations
-  such as "I don't like that coding style". Keep in mind that each unnecessary
-  warning helps hiding a real problem. If you don't like the kernel coding
-  style, don't write kernel drivers.
+* Please run your patch through 'checkpatch --strict'. There should be no
+  errors, no warnings, and few if any check messages. If there are any
+  messages, please be prepared to explain.
+
+* If your patch generates checkpatch errors, warnings, or check messages,
+  please refrain from explanations such as "I prefer that coding style".
+  Keep in mind that each unnecessary message helps hiding a real problem,
+  and a consistent coding style makes it easier for others to understand
+  and review the code.
 
 * Please test your patch thoroughly. We are not your test group.
   Sometimes a patch can not or not completely be tested because of missing
@@ -61,15 +66,30 @@ increase the chances of your change being accepted.
 
 * Make sure that all dependencies are listed in Kconfig.
 
+* Please list include files in alphabetic order.
+
+* Please align continuation lines with '(' on the previous line.
+
 * Avoid forward declarations if you can. Rearrange the code if necessary.
 
+* Avoid macros to generate groups of sensor attributes. It not only confuses
+  checkpatch, but also makes it more difficult to review the code.
+
 * Avoid calculations in macros and macro-generated functions. While such macros
   may save a line or so in the source, it obfuscates the code and makes code
   review more difficult. It may also result in code which is more complicated
   than necessary. Use inline functions or just regular functions instead.
 
+* Limit the number of kernel log messages. In general, your driver should not
+  generate an error message just because a runtime operation failed. Report
+  errors to user space instead, using an appropriate error code. Keep in mind
+  that kernel error log messages not only fill up the kernel log, but also are
+  printed synchronously, most likely with interrupt disabled, often to a serial
+  console. Excessive logging can seriously affect system performance.
+
 * Use devres functions whenever possible to allocate resources. For rationale
   and supported functions, please see Documentation/driver-model/devres.txt.
+  If a function is not supported by devres, consider using devm_add_action().
 
 * If the driver has a detect function, make sure it is silent. Debug messages
   and messages printed after a successful detection are acceptable, but it
@@ -96,8 +116,16 @@ increase the chances of your change being accepted.
   writing to it might cause a bad misconfiguration.
 
 * Make sure there are no race conditions in the probe function. Specifically,
-  completely initialize your chip first, then create sysfs entries and register
-  with the hwmon subsystem.
+  completely initialize your chip and your driver first, then register with
+  the hwmon subsystem.
+
+* Use devm_hwmon_device_register_with_groups() or, if your driver needs a remove
+  function, hwmon_device_register_with_groups() to register your driver with the
+  hwmon subsystem. Try using devm_add_action() instead of a remove function if
+  possible. Do not use hwmon_device_register().
+
+* Your driver should be buildable as module. If not, please be prepared to
+  explain why it has to be built into the kernel.
 
 * Do not provide support for deprecated sysfs attributes.
 

Documentation/hwmon/tmp401

@@ -22,6 +22,9 @@ Supported chips:
     Prefix: 'tmp435'
     Addresses scanned: I2C 0x48 - 0x4f
     Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp435.html
+  * Texas Instruments TMP461
+    Prefix: 'tmp461'
+    Datasheet: http://www.ti.com/product/tmp461
 
 Authors:
          Hans de Goede <hdegoede@redhat.com>
@@ -31,8 +34,8 @@ Description
 -----------
 
 This driver implements support for Texas Instruments TMP401, TMP411,
-TMP431, TMP432 and TMP435 chips. These chips implement one or two remote
-and one local temperature sensors. Temperature is measured in degrees
+TMP431, TMP432, TMP435, and TMP461 chips. These chips implement one or two
+remote and one local temperature sensors. Temperature is measured in degrees
 Celsius. Resolution of the remote sensor is 0.0625 degree. Local
 sensor resolution can be set to 0.5, 0.25, 0.125 or 0.0625 degree (not
 supported by the driver so far, so using the default resolution of 0.5
@@ -55,3 +58,10 @@ some additional features.
 
 TMP432 is compatible with TMP401 and TMP431. It supports two external
 temperature sensors.
+
+TMP461 is compatible with TMP401. It supports offset correction
+that is applied to the remote sensor.
+
+* Sensor offset values are temperature values
+
+  Exported via sysfs attribute tempX_offset

drivers/hwmon/Kconfig

@@ -486,6 +486,18 @@ config SENSORS_FSCHMD
 	  This driver can also be built as a module.  If so, the module
 	  will be called fschmd.
 
+config SENSORS_FTSTEUTATES
+	tristate "Fujitsu Technology Solutions sensor chip Teutates"
+	depends on I2C && WATCHDOG
+	select WATCHDOG_CORE
+	help
+	  If you say yes here you get support for the Fujitsu Technology
+	  Solutions (FTS) sensor chip "Teutates" including support for
+	  the integrated watchdog.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called ftsteutates.
+
 config SENSORS_GL518SM
 	tristate "Genesys Logic GL518SM"
 	depends on I2C
@@ -645,8 +657,8 @@ config SENSORS_JC42
 	  temperature sensors, which are used on many DDR3 memory modules for
 	  mobile devices and servers.  Support will include, but not be limited
 	  to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805,
-	  MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98, STTS424(E),
-	  STTS2002, STTS3000, TSE2002, TSE2004, TS3000, and TS3001.
+	  MCP9808, MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98,
+	  STTS424(E), STTS2002, STTS3000, TSE2002, TSE2004, TS3000, and TS3001.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called jc42.
@@ -958,6 +970,7 @@ config SENSORS_LM75
 	tristate "National Semiconductor LM75 and compatibles"
 	depends on I2C
 	depends on THERMAL || !THERMAL_OF
+	select REGMAP_I2C
 	help
 	  If you say yes here you get support for one common type of
 	  temperature sensor chip, with models including:
@@ -1265,6 +1278,17 @@ config SENSORS_SHT21
 	  This driver can also be built as a module.  If so, the module
 	  will be called sht21.
 
+config SENSORS_SHT3x
+	tristate "Sensiron humidity and temperature sensors. SHT3x and compat."
+	depends on I2C
+	select CRC8
+	help
+	  If you say yes here you get support for the Sensiron SHT30 and SHT31
+	  humidity and temperature sensors.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called sht3x.
+
 config SENSORS_SHTC1
 	tristate "Sensiron humidity and temperature sensors. SHTC1 and compat."
 	depends on I2C
@@ -1514,6 +1538,17 @@ config SENSORS_INA2XX
 	  This driver can also be built as a module.  If so, the module
 	  will be called ina2xx.
 
+config SENSORS_INA3221
+	tristate "Texas Instruments INA3221 Triple Power Monitor"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  If you say yes here you get support for  the TI INA3221 Triple Power
+	  Monitor.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called ina3221.
+
 config SENSORS_TC74
 	tristate "Microchip TC74"
 	depends on I2C
@@ -1538,6 +1573,7 @@ config SENSORS_TMP102
 	tristate "Texas Instruments TMP102"
 	depends on I2C
 	depends on THERMAL || !THERMAL_OF
+	select REGMAP_I2C
 	help
 	  If you say yes here you get support for Texas Instruments TMP102
 	  sensor chips.
@@ -1561,7 +1597,7 @@ config SENSORS_TMP401
 	depends on I2C
 	help
 	  If you say yes here you get support for Texas Instruments TMP401,
-	  TMP411, TMP431, TMP432 and TMP435 temperature sensor chips.
+	  TMP411, TMP431, TMP432, TMP435, and TMP461 temperature sensor chips.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called tmp401.

drivers/hwmon/Makefile

@@ -62,6 +62,7 @@ obj-$(CONFIG_SENSORS_F71882FG)	+= f71882fg.o
 obj-$(CONFIG_SENSORS_F75375S)	+= f75375s.o
 obj-$(CONFIG_SENSORS_FAM15H_POWER) += fam15h_power.o
 obj-$(CONFIG_SENSORS_FSCHMD)	+= fschmd.o
+obj-$(CONFIG_SENSORS_FTSTEUTATES) += ftsteutates.o
 obj-$(CONFIG_SENSORS_G760A)	+= g760a.o
 obj-$(CONFIG_SENSORS_G762)	+= g762.o
 obj-$(CONFIG_SENSORS_GL518SM)	+= gl518sm.o
@@ -77,6 +78,7 @@ obj-$(CONFIG_SENSORS_IBMPOWERNV)+= ibmpowernv.o
 obj-$(CONFIG_SENSORS_IIO_HWMON) += iio_hwmon.o
 obj-$(CONFIG_SENSORS_INA209)	+= ina209.o
 obj-$(CONFIG_SENSORS_INA2XX)	+= ina2xx.o
+obj-$(CONFIG_SENSORS_INA3221)	+= ina3221.o
 obj-$(CONFIG_SENSORS_IT87)	+= it87.o
 obj-$(CONFIG_SENSORS_JC42)	+= jc42.o
 obj-$(CONFIG_SENSORS_JZ4740)	+= jz4740-hwmon.o
@@ -138,6 +140,7 @@ obj-$(CONFIG_SENSORS_SCH5627)	+= sch5627.o
 obj-$(CONFIG_SENSORS_SCH5636)	+= sch5636.o
 obj-$(CONFIG_SENSORS_SHT15)	+= sht15.o
 obj-$(CONFIG_SENSORS_SHT21)	+= sht21.o
+obj-$(CONFIG_SENSORS_SHT3x)	+= sht3x.o
 obj-$(CONFIG_SENSORS_SHTC1)	+= shtc1.o
 obj-$(CONFIG_SENSORS_SIS5595)	+= sis5595.o
 obj-$(CONFIG_SENSORS_SMM665)	+= smm665.o

drivers/hwmon/ad7314.c

@@ -37,7 +37,6 @@ enum ad7314_variant {
 
 struct ad7314_data {
 	struct spi_device	*spi_dev;
-	struct device		*hwmon_dev;
 	u16 rx ____cacheline_aligned;
 };
 
@@ -88,62 +87,30 @@ static ssize_t ad7314_show_temperature(struct device *dev,
 	}
 }
 
-static ssize_t ad7314_show_name(struct device *dev,
-				struct device_attribute *devattr, char *buf)
-{
-	return sprintf(buf, "%s\n", to_spi_device(dev)->modalias);
-}
-
-static DEVICE_ATTR(name, S_IRUGO, ad7314_show_name, NULL);
 static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO,
 			  ad7314_show_temperature, NULL, 0);
 
-static struct attribute *ad7314_attributes[] = {
-	&dev_attr_name.attr,
+static struct attribute *ad7314_attrs[] = {
 	&sensor_dev_attr_temp1_input.dev_attr.attr,
 	NULL,
 };
 
-static const struct attribute_group ad7314_group = {
-	.attrs = ad7314_attributes,
-};
+ATTRIBUTE_GROUPS(ad7314);
 
 static int ad7314_probe(struct spi_device *spi_dev)
 {
-	int ret;
 	struct ad7314_data *chip;
+	struct device *hwmon_dev;
 
 	chip = devm_kzalloc(&spi_dev->dev, sizeof(*chip), GFP_KERNEL);
 	if (chip == NULL)
 		return -ENOMEM;
 
-	spi_set_drvdata(spi_dev, chip);
-
-	ret = sysfs_create_group(&spi_dev->dev.kobj, &ad7314_group);
-	if (ret < 0)
-		return ret;
-
-	chip->hwmon_dev = hwmon_device_register(&spi_dev->dev);
-	if (IS_ERR(chip->hwmon_dev)) {
-		ret = PTR_ERR(chip->hwmon_dev);
-		goto error_remove_group;
-	}
 	chip->spi_dev = spi_dev;
-
-	return 0;
-error_remove_group:
-	sysfs_remove_group(&spi_dev->dev.kobj, &ad7314_group);
-	return ret;
-}
-
-static int ad7314_remove(struct spi_device *spi_dev)
-{
-	struct ad7314_data *chip = spi_get_drvdata(spi_dev);
-
-	hwmon_device_unregister(chip->hwmon_dev);
-	sysfs_remove_group(&spi_dev->dev.kobj, &ad7314_group);
-
-	return 0;
+	hwmon_dev = devm_hwmon_device_register_with_groups(&spi_dev->dev,
+							   spi_dev->modalias,
+							   chip, ad7314_groups);
+	return PTR_ERR_OR_ZERO(hwmon_dev);
 }
 
 static const struct spi_device_id ad7314_id[] = {
@@ -159,7 +126,6 @@ static struct spi_driver ad7314_driver = {
 		.name = "ad7314",
 	},
 	.probe = ad7314_probe,
-	.remove = ad7314_remove,
 	.id_table = ad7314_id,
 };
 

drivers/hwmon/ads7871.c

@@ -66,14 +66,12 @@
 #include <linux/hwmon.h>
 #include <linux/hwmon-sysfs.h>
 #include <linux/err.h>
-#include <linux/mutex.h>
 #include <linux/delay.h>
 
 #define DEVICE_NAME	"ads7871"
 
 struct ads7871_data {
-	struct device	*hwmon_dev;
-	struct mutex	update_lock;
+	struct spi_device *spi;
 };
 
 static int ads7871_read_reg8(struct spi_device *spi, int reg)
@@ -101,7 +99,8 @@ static int ads7871_write_reg8(struct spi_device *spi, int reg, u8 val)
 static ssize_t show_voltage(struct device *dev,
 		struct device_attribute *da, char *buf)
 {
-	struct spi_device *spi = to_spi_device(dev);
+	struct ads7871_data *pdata = dev_get_drvdata(dev);
+	struct spi_device *spi = pdata->spi;
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 	int ret, val, i = 0;
 	uint8_t channel, mux_cnv;
@@ -139,12 +138,6 @@ static ssize_t show_voltage(struct device *dev,
 	}
 }
 
-static ssize_t ads7871_show_name(struct device *dev,
-				 struct device_attribute *devattr, char *buf)
-{
-	return sprintf(buf, "%s\n", to_spi_device(dev)->modalias);
-}
-
 static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, show_voltage, NULL, 0);
 static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_voltage, NULL, 1);
 static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_voltage, NULL, 2);
@@ -154,9 +147,7 @@ static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, show_voltage, NULL, 5);
 static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, show_voltage, NULL, 6);
 static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, show_voltage, NULL, 7);
 
-static DEVICE_ATTR(name, S_IRUGO, ads7871_show_name, NULL);
-
-static struct attribute *ads7871_attributes[] = {
+static struct attribute *ads7871_attrs[] = {
 	&sensor_dev_attr_in0_input.dev_attr.attr,
 	&sensor_dev_attr_in1_input.dev_attr.attr,
 	&sensor_dev_attr_in2_input.dev_attr.attr,
@@ -165,21 +156,18 @@ static struct attribute *ads7871_attributes[] = {
 	&sensor_dev_attr_in5_input.dev_attr.attr,
 	&sensor_dev_attr_in6_input.dev_attr.attr,
 	&sensor_dev_attr_in7_input.dev_attr.attr,
-	&dev_attr_name.attr,
 	NULL
 };
 
-static const struct attribute_group ads7871_group = {
-	.attrs = ads7871_attributes,
-};
+ATTRIBUTE_GROUPS(ads7871);
 
 static int ads7871_probe(struct spi_device *spi)
 {
-	int ret, err;
+	struct device *dev = &spi->dev;
+	int ret;
 	uint8_t val;
 	struct ads7871_data *pdata;
-
-	dev_dbg(&spi->dev, "probe\n");
+	struct device *hwmon_dev;
 
 	/* Configure the SPI bus */
 	spi->mode = (SPI_MODE_0);
@@ -193,7 +181,7 @@ static int ads7871_probe(struct spi_device *spi)
 	ads7871_write_reg8(spi, REG_OSC_CONTROL, val);
 	ret = ads7871_read_reg8(spi, REG_OSC_CONTROL);
 
-	dev_dbg(&spi->dev, "REG_OSC_CONTROL write:%x, read:%x\n", val, ret);
+	dev_dbg(dev, "REG_OSC_CONTROL write:%x, read:%x\n", val, ret);
 	/*
 	 * because there is no other error checking on an SPI bus
 	 * we need to make sure we really have a chip
@@ -201,46 +189,23 @@ static int ads7871_probe(struct spi_device *spi)
 	if (val != ret)
 		return -ENODEV;
 
-	pdata = devm_kzalloc(&spi->dev, sizeof(struct ads7871_data),
-			     GFP_KERNEL);
+	pdata = devm_kzalloc(dev, sizeof(struct ads7871_data), GFP_KERNEL);
 	if (!pdata)
 		return -ENOMEM;
 
-	err = sysfs_create_group(&spi->dev.kobj, &ads7871_group);
-	if (err < 0)
-		return err;
+	pdata->spi = spi;
 
-	spi_set_drvdata(spi, pdata);
-
-	pdata->hwmon_dev = hwmon_device_register(&spi->dev);
-	if (IS_ERR(pdata->hwmon_dev)) {
-		err = PTR_ERR(pdata->hwmon_dev);
-		goto error_remove;
-	}
-
-	return 0;
-
-error_remove:
-	sysfs_remove_group(&spi->dev.kobj, &ads7871_group);
-	return err;
-}
-
-static int ads7871_remove(struct spi_device *spi)
-{
-	struct ads7871_data *pdata = spi_get_drvdata(spi);
-
-	hwmon_device_unregister(pdata->hwmon_dev);
-	sysfs_remove_group(&spi->dev.kobj, &ads7871_group);
-	return 0;
+	hwmon_dev = devm_hwmon_device_register_with_groups(dev, spi->modalias,
+							   pdata,
+							   ads7871_groups);
+	return PTR_ERR_OR_ZERO(hwmon_dev);
 }
 
 static struct spi_driver ads7871_driver = {
 	.driver = {
 		.name = DEVICE_NAME,
 	},
-
 	.probe = ads7871_probe,
-	.remove = ads7871_remove,
 };
 
 module_spi_driver(ads7871_driver);

drivers/hwmon/adt7411.c

@@ -30,6 +30,7 @@
 
 #define ADT7411_REG_CFG1			0x18
 #define ADT7411_CFG1_START_MONITOR		(1 << 0)
+#define ADT7411_CFG1_RESERVED_BIT3		(1 << 3)
 
 #define ADT7411_REG_CFG2			0x19
 #define ADT7411_CFG2_DISABLE_AVG		(1 << 5)
@@ -296,8 +297,10 @@ static int adt7411_probe(struct i2c_client *client,
 	mutex_init(&data->device_lock);
 	mutex_init(&data->update_lock);
 
+	/* According to the datasheet, we must only write 1 to bit 3 */
 	ret = adt7411_modify_bit(client, ADT7411_REG_CFG1,
-				 ADT7411_CFG1_START_MONITOR, 1);
+				 ADT7411_CFG1_RESERVED_BIT3
+				 | ADT7411_CFG1_START_MONITOR, 1);
 	if (ret < 0)
 		return ret;
 

drivers/hwmon/dell-smm-hwmon.c

@@ -81,6 +81,7 @@ static bool disallow_fan_type_call;
 #define I8K_HWMON_HAVE_TEMP4	(1 << 3)
 #define I8K_HWMON_HAVE_FAN1	(1 << 4)
 #define I8K_HWMON_HAVE_FAN2	(1 << 5)
+#define I8K_HWMON_HAVE_FAN3	(1 << 6)
 
 MODULE_AUTHOR("Massimo Dal Zotto (dz@debian.org)");
 MODULE_AUTHOR("Pali Rohár <pali.rohar@gmail.com>");
@@ -139,6 +140,14 @@ static int i8k_smm(struct smm_regs *regs)
 	int eax = regs->eax;
 	cpumask_var_t old_mask;
 
+#ifdef DEBUG
+	int ebx = regs->ebx;
+	unsigned long duration;
+	ktime_t calltime, delta, rettime;
+
+	calltime = ktime_get();
+#endif
+
 	/* SMM requires CPU 0 */
 	if (!alloc_cpumask_var(&old_mask, GFP_KERNEL))
 		return -ENOMEM;
@@ -210,6 +219,15 @@ static int i8k_smm(struct smm_regs *regs)
 out:
 	set_cpus_allowed_ptr(current, old_mask);
 	free_cpumask_var(old_mask);
+
+#ifdef DEBUG
+	rettime = ktime_get();
+	delta = ktime_sub(rettime, calltime);
+	duration = ktime_to_ns(delta) >> 10;
+	pr_debug("smm(0x%.4x 0x%.4x) = 0x%.4x  (took %7lu usecs)\n", eax, ebx,
+		(rc ? 0xffff : regs->eax & 0xffff), duration);
+#endif
+
 	return rc;
 }
 
@@ -252,7 +270,7 @@ static int _i8k_get_fan_type(int fan)
 static int i8k_get_fan_type(int fan)
 {
 	/* I8K_SMM_GET_FAN_TYPE SMM call is expensive, so cache values */
-	static int types[2] = { INT_MIN, INT_MIN };
+	static int types[3] = { INT_MIN, INT_MIN, INT_MIN };
 
 	if (types[fan] == INT_MIN)
 		types[fan] = _i8k_get_fan_type(fan);
@@ -719,6 +737,12 @@ static SENSOR_DEVICE_ATTR(fan2_label, S_IRUGO, i8k_hwmon_show_fan_label, NULL,
 			  1);
 static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR, i8k_hwmon_show_pwm,
 			  i8k_hwmon_set_pwm, 1);
+static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, i8k_hwmon_show_fan, NULL,
+			  2);
+static SENSOR_DEVICE_ATTR(fan3_label, S_IRUGO, i8k_hwmon_show_fan_label, NULL,
+			  2);
+static SENSOR_DEVICE_ATTR(pwm3, S_IRUGO | S_IWUSR, i8k_hwmon_show_pwm,
+			  i8k_hwmon_set_pwm, 2);
 
 static struct attribute *i8k_attrs[] = {
 	&sensor_dev_attr_temp1_input.dev_attr.attr,	/* 0 */
@@ -735,6 +759,9 @@ static struct attribute *i8k_attrs[] = {
 	&sensor_dev_attr_fan2_input.dev_attr.attr,	/* 11 */
 	&sensor_dev_attr_fan2_label.dev_attr.attr,	/* 12 */
 	&sensor_dev_attr_pwm2.dev_attr.attr,		/* 13 */
+	&sensor_dev_attr_fan3_input.dev_attr.attr,	/* 14 */
+	&sensor_dev_attr_fan3_label.dev_attr.attr,	/* 15 */
+	&sensor_dev_attr_pwm3.dev_attr.attr,		/* 16 */
 	NULL
 };
 
@@ -742,7 +769,7 @@ static umode_t i8k_is_visible(struct kobject *kobj, struct attribute *attr,
 			      int index)
 {
 	if (disallow_fan_type_call &&
-	    (index == 9 || index == 12))
+	    (index == 9 || index == 12 || index == 15))
 		return 0;
 	if (index >= 0 && index <= 1 &&
 	    !(i8k_hwmon_flags & I8K_HWMON_HAVE_TEMP1))
@@ -762,6 +789,9 @@ static umode_t i8k_is_visible(struct kobject *kobj, struct attribute *attr,
 	if (index >= 11 && index <= 13 &&
 	    !(i8k_hwmon_flags & I8K_HWMON_HAVE_FAN2))
 		return 0;
+	if (index >= 14 && index <= 16 &&
+	    !(i8k_hwmon_flags & I8K_HWMON_HAVE_FAN3))
+		return 0;
 
 	return attr->mode;
 }
@@ -807,6 +837,13 @@ static int __init i8k_init_hwmon(void)
 	if (err >= 0)
 		i8k_hwmon_flags |= I8K_HWMON_HAVE_FAN2;
 
+	/* Third fan attributes, if fan status or type is OK */
+	err = i8k_get_fan_status(2);
+	if (err < 0)
+		err = i8k_get_fan_type(2);
+	if (err >= 0)
+		i8k_hwmon_flags |= I8K_HWMON_HAVE_FAN3;
+
 	i8k_hwmon_dev = hwmon_device_register_with_groups(NULL, "dell_smm",
 							  NULL, i8k_groups);
 	if (IS_ERR(i8k_hwmon_dev)) {

drivers/hwmon/emc6w201.c

@@ -464,7 +464,7 @@ static int emc6w201_detect(struct i2c_client *client,
 	if (verstep < 0 || (verstep & 0xF0) != 0xB0)
 		return -ENODEV;
 	if ((verstep & 0x0F) > 2) {
-		dev_dbg(&client->dev, "Unknwown EMC6W201 stepping %d\n",
+		dev_dbg(&client->dev, "Unknown EMC6W201 stepping %d\n",
 			verstep & 0x0F);
 		return -ENODEV;
 	}

drivers/hwmon/jc42.c

@@ -31,6 +31,7 @@
 #include <linux/hwmon-sysfs.h>
 #include <linux/err.h>
 #include <linux/mutex.h>
+#include <linux/of.h>
 
 /* Addresses to scan */
 static const unsigned short normal_i2c[] = {
@@ -104,6 +105,9 @@ static const unsigned short normal_i2c[] = {
 #define MCP9804_DEVID		0x0200
 #define MCP9804_DEVID_MASK	0xfffc
 
+#define MCP9808_DEVID		0x0400
+#define MCP9808_DEVID_MASK	0xfffc
+
 #define MCP98242_DEVID		0x2000
 #define MCP98242_DEVID_MASK	0xfffc
 
@@ -160,6 +164,7 @@ static struct jc42_chips jc42_chips[] = {
 	{ IDT_MANID, TS3001_DEVID, TS3001_DEVID_MASK },
 	{ MAX_MANID, MAX6604_DEVID, MAX6604_DEVID_MASK },
 	{ MCP_MANID, MCP9804_DEVID, MCP9804_DEVID_MASK },
+	{ MCP_MANID, MCP9808_DEVID, MCP9808_DEVID_MASK },
 	{ MCP_MANID, MCP98242_DEVID, MCP98242_DEVID_MASK },
 	{ MCP_MANID, MCP98243_DEVID, MCP98243_DEVID_MASK },
 	{ MCP_MANID, MCP98244_DEVID, MCP98244_DEVID_MASK },
@@ -537,11 +542,20 @@ static const struct i2c_device_id jc42_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, jc42_id);
 
+#ifdef CONFIG_OF
+static const struct of_device_id jc42_of_ids[] = {
+	{ .compatible = "jedec,jc-42.4-temp", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, jc42_of_ids);
+#endif
+
 static struct i2c_driver jc42_driver = {
-	.class		= I2C_CLASS_SPD,
+	.class		= I2C_CLASS_SPD | I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "jc42",
 		.pm = JC42_DEV_PM_OPS,
+		.of_match_table = of_match_ptr(jc42_of_ids),
 	},
 	.probe		= jc42_probe,
 	.remove		= jc42_remove,

drivers/hwmon/jz4740-hwmon.c

@@ -29,23 +29,13 @@
 
 struct jz4740_hwmon {
 	void __iomem *base;
-
 	int irq;
-
 	const struct mfd_cell *cell;
-	struct device *hwmon;
-
+	struct platform_device *pdev;
 	struct completion read_completion;
-
 	struct mutex lock;
 };
 
-static ssize_t jz4740_hwmon_show_name(struct device *dev,
-	struct device_attribute *dev_attr, char *buf)
-{
-	return sprintf(buf, "jz4740\n");
-}
-
 static irqreturn_t jz4740_hwmon_irq(int irq, void *data)
 {
 	struct jz4740_hwmon *hwmon = data;
@@ -58,6 +48,7 @@ static ssize_t jz4740_hwmon_read_adcin(struct device *dev,
 	struct device_attribute *dev_attr, char *buf)
 {
 	struct jz4740_hwmon *hwmon = dev_get_drvdata(dev);
+	struct platform_device *pdev = hwmon->pdev;
 	struct completion *completion = &hwmon->read_completion;
 	long t;
 	unsigned long val;
@@ -68,7 +59,7 @@ static ssize_t jz4740_hwmon_read_adcin(struct device *dev,
 	reinit_completion(completion);
 
 	enable_irq(hwmon->irq);
-	hwmon->cell->enable(to_platform_device(dev));
+	hwmon->cell->enable(pdev);
 
 	t = wait_for_completion_interruptible_timeout(completion, HZ);
 
@@ -80,7 +71,7 @@ static ssize_t jz4740_hwmon_read_adcin(struct device *dev,
 		ret = t ? t : -ETIMEDOUT;
 	}
 
-	hwmon->cell->disable(to_platform_device(dev));
+	hwmon->cell->disable(pdev);
 	disable_irq(hwmon->irq);
 
 	mutex_unlock(&hwmon->lock);
@@ -88,26 +79,24 @@ static ssize_t jz4740_hwmon_read_adcin(struct device *dev,
 	return ret;
 }
 
-static DEVICE_ATTR(name, S_IRUGO, jz4740_hwmon_show_name, NULL);
 static DEVICE_ATTR(in0_input, S_IRUGO, jz4740_hwmon_read_adcin, NULL);
 
-static struct attribute *jz4740_hwmon_attributes[] = {
-	&dev_attr_name.attr,
+static struct attribute *jz4740_attrs[] = {
 	&dev_attr_in0_input.attr,
 	NULL
 };
 
-static const struct attribute_group jz4740_hwmon_attr_group = {
-	.attrs = jz4740_hwmon_attributes,
-};
+ATTRIBUTE_GROUPS(jz4740);
 
 static int jz4740_hwmon_probe(struct platform_device *pdev)
 {
 	int ret;
+	struct device *dev = &pdev->dev;
 	struct jz4740_hwmon *hwmon;
+	struct device *hwmon_dev;
 	struct resource *mem;
 
-	hwmon = devm_kzalloc(&pdev->dev, sizeof(*hwmon), GFP_KERNEL);
+	hwmon = devm_kzalloc(dev, sizeof(*hwmon), GFP_KERNEL);
 	if (!hwmon)
 		return -ENOMEM;
 
@@ -125,12 +114,11 @@ static int jz4740_hwmon_probe(struct platform_device *pdev)
 	if (IS_ERR(hwmon->base))
 		return PTR_ERR(hwmon->base);
 
+	hwmon->pdev = pdev;
 	init_completion(&hwmon->read_completion);
 	mutex_init(&hwmon->lock);
 
-	platform_set_drvdata(pdev, hwmon);
-
-	ret = devm_request_irq(&pdev->dev, hwmon->irq, jz4740_hwmon_irq, 0,
+	ret = devm_request_irq(dev, hwmon->irq, jz4740_hwmon_irq, 0,
 			       pdev->name, hwmon);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to request irq: %d\n", ret);
@@ -138,38 +126,13 @@ static int jz4740_hwmon_probe(struct platform_device *pdev)
 	}
 	disable_irq(hwmon->irq);
 
-	ret = sysfs_create_group(&pdev->dev.kobj, &jz4740_hwmon_attr_group);
-	if (ret) {
-		dev_err(&pdev->dev, "Failed to create sysfs group: %d\n", ret);
-		return ret;
-	}
-
-	hwmon->hwmon = hwmon_device_register(&pdev->dev);
-	if (IS_ERR(hwmon->hwmon)) {
-		ret = PTR_ERR(hwmon->hwmon);
-		goto err_remove_file;
-	}
-
-	return 0;
-
-err_remove_file:
-	sysfs_remove_group(&pdev->dev.kobj, &jz4740_hwmon_attr_group);
-	return ret;
-}
-
-static int jz4740_hwmon_remove(struct platform_device *pdev)
-{
-	struct jz4740_hwmon *hwmon = platform_get_drvdata(pdev);
-
-	hwmon_device_unregister(hwmon->hwmon);
-	sysfs_remove_group(&pdev->dev.kobj, &jz4740_hwmon_attr_group);
-
-	return 0;
+	hwmon_dev = devm_hwmon_device_register_with_groups(dev, "jz4740", hwmon,
+							   jz4740_groups);
+	return PTR_ERR_OR_ZERO(hwmon_dev);
 }
 
 static struct platform_driver jz4740_hwmon_driver = {
 	.probe	= jz4740_hwmon_probe,
-	.remove = jz4740_hwmon_remove,
 	.driver = {
 		.name = "jz4740-hwmon",
 	},

drivers/hwmon/tmp401.c

@@ -47,7 +47,7 @@
 static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4c, 0x4d,
 	0x4e, 0x4f, I2C_CLIENT_END };
 
-enum chips { tmp401, tmp411, tmp431, tmp432, tmp435 };
+enum chips { tmp401, tmp411, tmp431, tmp432, tmp435, tmp461 };
 
 /*
  * The TMP401 registers, note some registers have different addresses for
@@ -62,31 +62,34 @@ enum chips { tmp401, tmp411, tmp431, tmp432, tmp435 };
 #define TMP401_MANUFACTURER_ID_REG		0xFE
 #define TMP401_DEVICE_ID_REG			0xFF
 
-static const u8 TMP401_TEMP_MSB_READ[6][2] = {
+static const u8 TMP401_TEMP_MSB_READ[7][2] = {
 	{ 0x00, 0x01 },	/* temp */
 	{ 0x06, 0x08 },	/* low limit */
 	{ 0x05, 0x07 },	/* high limit */
 	{ 0x20, 0x19 },	/* therm (crit) limit */
 	{ 0x30, 0x34 },	/* lowest */
 	{ 0x32, 0x36 },	/* highest */
+	{ 0, 0x11 },	/* offset */
 };
 
-static const u8 TMP401_TEMP_MSB_WRITE[6][2] = {
+static const u8 TMP401_TEMP_MSB_WRITE[7][2] = {
 	{ 0, 0 },	/* temp (unused) */
 	{ 0x0C, 0x0E },	/* low limit */
 	{ 0x0B, 0x0D },	/* high limit */
 	{ 0x20, 0x19 },	/* therm (crit) limit */
 	{ 0x30, 0x34 },	/* lowest */
 	{ 0x32, 0x36 },	/* highest */
+	{ 0, 0x11 },	/* offset */
 };
 
-static const u8 TMP401_TEMP_LSB[6][2] = {
+static const u8 TMP401_TEMP_LSB[7][2] = {
 	{ 0x15, 0x10 },	/* temp */
 	{ 0x17, 0x14 },	/* low limit */
 	{ 0x16, 0x13 },	/* high limit */
 	{ 0, 0 },	/* therm (crit) limit (unused) */
 	{ 0x31, 0x35 },	/* lowest */
 	{ 0x33, 0x37 },	/* highest */
+	{ 0, 0x12 },	/* offset */
 };
 
 static const u8 TMP432_TEMP_MSB_READ[4][3] = {
@@ -149,6 +152,7 @@ static const struct i2c_device_id tmp401_id[] = {
 	{ "tmp431", tmp431 },
 	{ "tmp432", tmp432 },
 	{ "tmp435", tmp435 },
+	{ "tmp461", tmp461 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, tmp401_id);
@@ -170,7 +174,7 @@ struct tmp401_data {
 	/* register values */
 	u8 status[4];
 	u8 config;
-	u16 temp[6][3];
+	u16 temp[7][3];
 	u8 temp_crit_hyst;
 };
 
@@ -612,6 +616,22 @@ static const struct attribute_group tmp432_group = {
 	.attrs = tmp432_attributes,
 };
 
+/*
+ * Additional features of the TMP461 chip.
+ * The TMP461 temperature offset for the remote channel.
+ */
+static SENSOR_DEVICE_ATTR_2(temp2_offset, S_IWUSR | S_IRUGO, show_temp,
+			    store_temp, 6, 1);
+
+static struct attribute *tmp461_attributes[] = {
+	&sensor_dev_attr_temp2_offset.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group tmp461_group = {
+	.attrs = tmp461_attributes,
+};
+
 /*
  * Begin non sysfs callback code (aka Real code)
  */
@@ -714,7 +734,7 @@ static int tmp401_probe(struct i2c_client *client,
 			const struct i2c_device_id *id)
 {
 	static const char * const names[] = {
-		"TMP401", "TMP411", "TMP431", "TMP432", "TMP435"
+		"TMP401", "TMP411", "TMP431", "TMP432", "TMP435", "TMP461"
 	};
 	struct device *dev = &client->dev;
 	struct device *hwmon_dev;
@@ -745,6 +765,9 @@ static int tmp401_probe(struct i2c_client *client,
 	if (data->kind == tmp432)
 		data->groups[groups++] = &tmp432_group;
 
+	if (data->kind == tmp461)
+		data->groups[groups++] = &tmp461_group;
+
 	hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
 							   data, data->groups);
 	if (IS_ERR(hwmon_dev))

include/linux/platform_data/sht3x.h

+/*
+ * Copyright (C) 2016 Sensirion AG, Switzerland
+ * Author: David Frey <david.frey@sensirion.com>
+ * Author: Pascal Sachs <pascal.sachs@sensirion.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __SHT3X_H_
+#define __SHT3X_H_
+
+struct sht3x_platform_data {
+	bool blocking_io;
+	bool high_precision;
+};
+#endif /* __SHT3X_H_ */