net: resolve forwarding path from virtual netdevice and HW destination address
This patch adds dev_fill_forward_path() which resolves the path to reach the real netdevice from the IP forwarding side. This function takes as input the netdevice and the destination hardware address and it walks down the devices calling .ndo_fill_forward_path() for each device until the real device is found. For instance, assuming the following topology: IP forwarding / \ br0 eth0 / \ eth1 eth2 . . . ethX ab:cd:ef:ab:cd:ef where eth1 and eth2 are bridge ports and eth0 provides WAN connectivity. ethX is the interface in another box which is connected to the eth1 bridge port. For packets going through IP forwarding to br0 whose destination MAC address is ab:cd:ef:ab:cd:ef, dev_fill_forward_path() provides the following path: br0 -> eth1 .ndo_fill_forward_path for br0 looks up at the FDB for the bridge port from the destination MAC address to get the bridge port eth1. This information allows to create a fast path that bypasses the classic bridge and IP forwarding paths, so packets go directly from the bridge port eth1 to eth0 (wan interface) and vice versa. fast path .------------------------. / \ | IP forwarding | | / \ \/ | br0 eth0 . / \ -> eth1 eth2 . . . ethX ab:cd:ef:ab:cd:ef Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Showing
Please register or sign in to comment