Commit de0710aa authored by Eric Miao's avatar Eric Miao

[ARM] pxa: re-order platforms in Kconfig and Makefile

Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted
in the following order:

 1. By category:
    Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed
    by end-user products (this is to ensure the commonly referenced platforms
    will appear first)

 2. By vendor name in alphabetic within each category
    (this is to ensure code reuse and similar platforms can be grouped as
     much as possible)

	   VENDOR        BOARD
	Intel/Marvell   Lubbock
	Intel/Marvell   Mainstone
	Intel/Marvell   Zylonite
	Intel/Marvell   Littleton
	Intel/Marvell   TavorEVB
	Intel/Marvell   SAAR

	Accelent        IDP
	Arcom/Eurotech  VIPER
	Community       Balloon3
	Cogent          CSB726
	CompuLab        EM_X270
	CompuLab        EXEDA
	CompuLab        ARMCORE
	CompuLab        CM_X300
	Gumstix         Gumstix
	Intel Research  MOTE2
	Intel research  Stargate2
	Iskratel        XCEP
	Keith and Koep  Trizeps4
	LogicPD         LPD270
	Phytec          PCM027
	Toradex         Colibri

	HP              HX4700
	HP              H5000
	HTC             Himalaya
	HTC             Magician
	Mitac           MioA701
	Motorola        EZX
	NEC             MP900C
	Palm            Palm PDA
	Palm            Palm GSM
	Sharp           Zaurus
	Toshiba         E-Series
Signed-off-by: default avatarEric Miao <eric.y.miao@gmail.com>
parent d0a92fd3
...@@ -31,216 +31,144 @@ endmenu ...@@ -31,216 +31,144 @@ endmenu
endif endif
config ARCH_GUMSTIX comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
bool "Gumstix XScale 255 boards"
select PXA25x
help
Say Y here if you intend to run this kernel on
Basix, Connex, ws-200ax, ws-400ax systems
choice
prompt "Gumstix Carrier/Expansion Board"
depends on ARCH_GUMSTIX
config GUMSTIX_AM200EPD
bool "Enable AM200EPD board support"
config GUMSTIX_AM300EPD
bool "Enable AM300EPD board support"
endchoice
config MACH_INTELMOTE2
bool "Intel Mote 2 Platform"
select PXA27x
select IWMMXT
select PXA_HAVE_BOARD_IRQS
config MACH_STARGATE2
bool "Intel Stargate 2 Platform"
select PXA27x
select IWMMXT
select PXA_HAVE_BOARD_IRQS
config ARCH_LUBBOCK config ARCH_LUBBOCK
bool "Intel DBPXA250 Development Platform" bool "Intel DBPXA250 Development Platform (aka Lubbock)"
select PXA25x select PXA25x
select SA1111 select SA1111
select PXA_HAVE_BOARD_IRQS select PXA_HAVE_BOARD_IRQS
config MACH_LOGICPD_PXA270 config MACH_MAINSTONE
bool "LogicPD PXA270 Card Engine Development Platform" bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
select PXA27x select PXA27x
select HAVE_PWM select HAVE_PWM
select PXA_HAVE_BOARD_IRQS select PXA_HAVE_BOARD_IRQS
config MACH_MAINSTONE config MACH_ZYLONITE
bool "Intel HCDDBBVA0 Development Platform" bool "PXA3xx Development Platform (aka Zylonite)"
select PXA27x select PXA3xx
select PXA_SSP
select HAVE_PWM select HAVE_PWM
select PXA_HAVE_BOARD_IRQS select PXA_HAVE_BOARD_IRQS
config MACH_MP900C config MACH_LITTLETON
bool "Nec Mobilepro 900/c" bool "PXA3xx Form Factor Platform (aka Littleton)"
select PXA3xx
select PXA_SSP
config MACH_TAVOREVB
bool "PXA930 Evaluation Board (aka TavorEVB)"
select PXA3xx
select CPU_PXA930
config MACH_SAAR
bool "PXA930 Handheld Platform (aka SAAR)"
select PXA3xx
select CPU_PXA930
comment "Third Party Dev Platforms (sorted by vendor name)"
config ARCH_PXA_IDP
bool "Accelent Xscale IDP"
select PXA25x select PXA25x
config ARCH_VIPER
bool "Arcom/Eurotech VIPER SBC"
select PXA25x
select ISA
select I2C_GPIO
select HAVE_PWM
select PXA_HAVE_BOARD_IRQS
select PXA_HAVE_ISA_IRQS
config MACH_BALLOON3 config MACH_BALLOON3
bool "Balloon 3 board" bool "Balloon 3 board"
select PXA27x select PXA27x
select IWMMXT select IWMMXT
select PXA_HAVE_BOARD_IRQS select PXA_HAVE_BOARD_IRQS
config ARCH_PXA_IDP config MACH_CSB726
bool "Accelent Xscale IDP" bool "Enable Cogent CSB726 System On a Module"
select PXA25x select PXA27x
select IWMMXT
config PXA_SHARPSL
bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
select SHARP_SCOOP
select SHARP_PARAM
help help
Say Y here if you intend to run this kernel on a Say Y here if you intend to run this kernel on a Cogent
Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi), CSB726 System On Module.
SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
handheld computer.
config SHARPSL_PM
bool
select APM_EMULATION
config CORGI_SSP_DEPRECATED config CSB726_CSB701
bool bool "Enable support for CSB701 baseboard"
select PXA_SSP depends on MACH_CSB726
help
This option will include corgi_ssp.c and corgi_lcd.c
that corgi_ts.c and other legacy drivers (corgi_bl.c
and sharpsl_pm.c) may depend on.
config MACH_POODLE config MACH_ARMCORE
bool "Enable Sharp SL-5600 (Poodle) Support" bool "CompuLab CM-X255/CM-X270 modules"
depends on PXA_SHARPSL select PXA27x
select IWMMXT
select PXA25x select PXA25x
select SHARP_LOCOMO
select PXA_SSP select PXA_SSP
config MACH_CORGI config MACH_EM_X270
bool "Enable Sharp SL-C700 (Corgi) Support" bool "CompuLab EM-x270 platform"
depends on PXA_SHARPSL
select PXA25x
select PXA_SHARP_C7xx
config MACH_SHEPHERD
bool "Enable Sharp SL-C750 (Shepherd) Support"
depends on PXA_SHARPSL
select PXA25x
select PXA_SHARP_C7xx
config MACH_HUSKY
bool "Enable Sharp SL-C760 (Husky) Support"
depends on PXA_SHARPSL
select PXA25x
select PXA_SHARP_C7xx
config MACH_AKITA
bool "Enable Sharp SL-1000 (Akita) Support"
depends on PXA_SHARPSL
select PXA27x
select PXA_SHARP_Cxx00
select MACH_SPITZ
select I2C
select I2C_PXA
config MACH_SPITZ
bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
depends on PXA_SHARPSL
select PXA27x select PXA27x
select PXA_SHARP_Cxx00
config MACH_BORZOI config MACH_EXEDA
bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support" bool "CompuLab eXeda platform"
depends on PXA_SHARPSL
select PXA27x select PXA27x
select PXA_SHARP_Cxx00
config MACH_TOSA config MACH_CM_X300
bool "Enable Sharp SL-6000x (Tosa) Support" bool "CompuLab CM-X300 modules"
depends on PXA_SHARPSL select PXA3xx
select PXA25x select CPU_PXA300
select PXA_HAVE_BOARD_IRQS
config ARCH_VIPER config ARCH_GUMSTIX
bool "Arcom/Eurotech VIPER SBC" bool "Gumstix XScale 255 boards"
select PXA25x select PXA25x
select ISA help
select I2C_GPIO Say Y here if you intend to run this kernel on
select HAVE_PWM Basix, Connex, ws-200ax, ws-400ax systems
select PXA_HAVE_BOARD_IRQS
select PXA_HAVE_ISA_IRQS
config ARCH_PXA_ESERIES choice
bool "PXA based Toshiba e-series PDAs" prompt "Gumstix Carrier/Expansion Board"
select PXA25x depends on ARCH_GUMSTIX
select PXA_HAVE_BOARD_IRQS
config MACH_E330 config GUMSTIX_AM200EPD
bool "Toshiba e330" bool "Enable AM200EPD board support"
default y
depends on ARCH_PXA_ESERIES
help
Say Y here if you intend to run this kernel on a Toshiba
e330 family PDA.
config MACH_E350 config GUMSTIX_AM300EPD
bool "Toshiba e350" bool "Enable AM300EPD board support"
default y
depends on ARCH_PXA_ESERIES
help
Say Y here if you intend to run this kernel on a Toshiba
e350 family PDA.
config MACH_E740 endchoice
bool "Toshiba e740"
default y
depends on ARCH_PXA_ESERIES
select FB_W100
help
Say Y here if you intend to run this kernel on a Toshiba
e740 family PDA.
config MACH_E750 config MACH_INTELMOTE2
bool "Toshiba e750" bool "Intel Mote 2 Platform"
default y select PXA27x
depends on ARCH_PXA_ESERIES select IWMMXT
select FB_W100 select PXA_HAVE_BOARD_IRQS
help
Say Y here if you intend to run this kernel on a Toshiba
e750 family PDA.
config MACH_E400 config MACH_STARGATE2
bool "Toshiba e400" bool "Intel Stargate 2 Platform"
default y select PXA27x
depends on ARCH_PXA_ESERIES select IWMMXT
help select PXA_HAVE_BOARD_IRQS
Say Y here if you intend to run this kernel on a Toshiba
e400 family PDA.
config MACH_E800 config MACH_XCEP
bool "Toshiba e800" bool "Iskratel Electronics XCEP"
default y select PXA25x
depends on ARCH_PXA_ESERIES select MTD
select FB_W100 select MTD_PARTITIONS
select MTD_PHYSMAP
select MTD_CFI_INTELEXT
select MTD_CFI
select MTD_CHAR
select SMC91X
select PXA_SSP
help help
Say Y here if you intend to run this kernel on a Toshiba PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
e800 family PDA. Tuned for usage in Libera instruments for particle accelerators.
config TRIZEPS_PXA config TRIZEPS_PXA
bool "PXA based Keith und Koep Trizeps DIMM-Modules" bool "PXA based Keith und Koep Trizeps DIMM-Modules"
config MACH_H5000
bool "HP iPAQ h5000"
select PXA25x
config MACH_TRIZEPS4 config MACH_TRIZEPS4
bool "Keith und Koep Trizeps4 DIMM-Module" bool "Keith und Koep Trizeps4 DIMM-Module"
depends on TRIZEPS_PXA depends on TRIZEPS_PXA
...@@ -274,62 +202,55 @@ config TRIZEPS_PCMCIA ...@@ -274,62 +202,55 @@ config TRIZEPS_PCMCIA
help help
Enable PCMCIA support for Trizeps modules Enable PCMCIA support for Trizeps modules
config MACH_EM_X270 config MACH_LOGICPD_PXA270
bool "CompuLab EM-x270 platform" bool "LogicPD PXA270 Card Engine Development Platform"
select PXA27x
config MACH_EXEDA
bool "CompuLab eXeda platform"
select PXA27x select PXA27x
select HAVE_PWM
select PXA_HAVE_BOARD_IRQS
config MACH_COLIBRI config MACH_PCM027
bool "Toradex Colibri PXA270" bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
select PXA27x select PXA27x
select IWMMXT
select PXA_SSP
select PXA_HAVE_BOARD_IRQS
config MACH_COLIBRI300 config MACH_PCM990_BASEBOARD
bool "Toradex Colibri PXA300/310" bool "PHYTEC PCM-990 development board"
select PXA3xx select HAVE_PWM
select CPU_PXA300 depends on MACH_PCM027
config MACH_COLIBRI320 choice
bool "Toradex Colibri PXA320" prompt "display on pcm990"
select PXA3xx depends on MACH_PCM990_BASEBOARD
select CPU_PXA320
config MACH_ZYLONITE config PCM990_DISPLAY_SHARP
bool "PXA3xx Development Platform (aka Zylonite)" bool "sharp lq084v1dg21 stn display"
select PXA3xx
select PXA_SSP
select HAVE_PWM
select PXA_HAVE_BOARD_IRQS
config MACH_LITTLETON config PCM990_DISPLAY_NEC
bool "PXA3xx Form Factor Platform (aka Littleton)" bool "nec nl6448bc20_18d tft display"
select PXA3xx
select PXA_SSP
config MACH_TAVOREVB config PCM990_DISPLAY_NONE
bool "PXA930 Evaluation Board (aka TavorEVB)" bool "no display"
select PXA3xx
select CPU_PXA930
config MACH_SAAR endchoice
bool "PXA930 Handheld Platform (aka SAAR)"
select PXA3xx
select CPU_PXA930
config MACH_ARMCORE config MACH_COLIBRI
bool "CompuLab CM-X255/CM-X270 modules" bool "Toradex Colibri PXA270"
select PXA27x select PXA27x
select IWMMXT
select PXA25x
select PXA_SSP
config MACH_CM_X300 config MACH_COLIBRI300
bool "CompuLab CM-X300 modules" bool "Toradex Colibri PXA300/310"
select PXA3xx select PXA3xx
select CPU_PXA300 select CPU_PXA300
config MACH_COLIBRI320
bool "Toradex Colibri PXA320"
select PXA3xx
select CPU_PXA320
comment "End-user Products (sorted by vendor name)"
config MACH_H4700 config MACH_H4700
bool "HP iPAQ hx4700" bool "HP iPAQ hx4700"
select PXA27x select PXA27x
...@@ -338,6 +259,15 @@ config MACH_H4700 ...@@ -338,6 +259,15 @@ config MACH_H4700
select HAVE_PWM select HAVE_PWM
select PXA_HAVE_BOARD_IRQS select PXA_HAVE_BOARD_IRQS
config MACH_H5000
bool "HP iPAQ h5000"
select PXA25x
config MACH_HIMALAYA
bool "HTC Himalaya Support"
select CPU_PXA26x
select FB_W100
config MACH_MAGICIAN config MACH_MAGICIAN
bool "Enable HTC Magician Support" bool "Enable HTC Magician Support"
select PXA27x select PXA27x
...@@ -346,11 +276,6 @@ config MACH_MAGICIAN ...@@ -346,11 +276,6 @@ config MACH_MAGICIAN
select HAVE_PWM select HAVE_PWM
select PXA_HAVE_BOARD_IRQS select PXA_HAVE_BOARD_IRQS
config MACH_HIMALAYA
bool "HTC Himalaya Support"
select CPU_PXA26x
select FB_W100
config MACH_MIOA701 config MACH_MIOA701
bool "Mitac Mio A701 Support" bool "Mitac Mio A701 Support"
select PXA27x select PXA27x
...@@ -362,13 +287,47 @@ config MACH_MIOA701 ...@@ -362,13 +287,47 @@ config MACH_MIOA701
MIO A701. Currently there is only basic support MIO A701. Currently there is only basic support
for this PDA. for this PDA.
config MACH_PCM027 config PXA_EZX
bool "Phytec phyCORE-PXA270 CPU module (PCM-027)" bool "Motorola EZX Platform"
select PXA27x select PXA27x
select IWMMXT select IWMMXT
select PXA_SSP select HAVE_PWM
select PXA_HAVE_BOARD_IRQS select PXA_HAVE_BOARD_IRQS
config MACH_EZX_A780
bool "Motorola EZX A780"
default y
depends on PXA_EZX
config MACH_EZX_E680
bool "Motorola EZX E680"
default y
depends on PXA_EZX
config MACH_EZX_A1200
bool "Motorola EZX A1200"
default y
depends on PXA_EZX
config MACH_EZX_A910
bool "Motorola EZX A910"
default y
depends on PXA_EZX
config MACH_EZX_E6
bool "Motorola EZX E6"
default y
depends on PXA_EZX
config MACH_EZX_E2
bool "Motorola EZX E2"
default y
depends on PXA_EZX
config MACH_MP900C
bool "Nec Mobilepro 900/c"
select PXA25x
config ARCH_PXA_PALM config ARCH_PXA_PALM
bool "PXA based Palm PDAs" bool "PXA based Palm PDAs"
select HAVE_PWM select HAVE_PWM
...@@ -421,6 +380,16 @@ config MACH_PALMZ72 ...@@ -421,6 +380,16 @@ config MACH_PALMZ72
Say Y here if you intend to run this kernel on Palm Zire 72 Say Y here if you intend to run this kernel on Palm Zire 72
handheld computer. handheld computer.
config MACH_PALMLD
bool "Palm LifeDrive"
default y
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
help
Say Y here if you intend to run this kernel on a Palm LifeDrive
handheld computer.
config PALM_TREO config PALM_TREO
bool bool
depends on ARCH_PXA_PALM depends on ARCH_PXA_PALM
...@@ -447,99 +416,136 @@ config MACH_TREO680 ...@@ -447,99 +416,136 @@ config MACH_TREO680
Say Y here if you intend to run this kernel on Palm Treo 680 Say Y here if you intend to run this kernel on Palm Treo 680
smartphone. smartphone.
config MACH_PALMLD config PXA_SHARPSL
bool "Palm LifeDrive" bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
default y select SHARP_SCOOP
depends on ARCH_PXA_PALM select SHARP_PARAM
select PXA27x
select IWMMXT
help help
Say Y here if you intend to run this kernel on a Palm LifeDrive Say Y here if you intend to run this kernel on a
Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
handheld computer. handheld computer.
config MACH_PCM990_BASEBOARD config SHARPSL_PM
bool "PHYTEC PCM-990 development board" bool
select HAVE_PWM select APM_EMULATION
depends on MACH_PCM027
choice config CORGI_SSP_DEPRECATED
prompt "display on pcm990" bool
depends on MACH_PCM990_BASEBOARD select PXA_SSP
help
This option will include corgi_ssp.c and corgi_lcd.c
that corgi_ts.c and other legacy drivers (corgi_bl.c
and sharpsl_pm.c) may depend on.
config PCM990_DISPLAY_SHARP config MACH_POODLE
bool "sharp lq084v1dg21 stn display" bool "Enable Sharp SL-5600 (Poodle) Support"
depends on PXA_SHARPSL
select PXA25x
select SHARP_LOCOMO
select PXA_SSP
config PCM990_DISPLAY_NEC config MACH_CORGI
bool "nec nl6448bc20_18d tft display" bool "Enable Sharp SL-C700 (Corgi) Support"
depends on PXA_SHARPSL
select PXA25x
select PXA_SHARP_C7xx
config PCM990_DISPLAY_NONE config MACH_SHEPHERD
bool "no display" bool "Enable Sharp SL-C750 (Shepherd) Support"
depends on PXA_SHARPSL
select PXA25x
select PXA_SHARP_C7xx
endchoice config MACH_HUSKY
bool "Enable Sharp SL-C760 (Husky) Support"
depends on PXA_SHARPSL
select PXA25x
select PXA_SHARP_C7xx
config MACH_CSB726 config MACH_AKITA
bool "Enable Cogent CSB726 System On a Module" bool "Enable Sharp SL-1000 (Akita) Support"
depends on PXA_SHARPSL
select PXA27x select PXA27x
select IWMMXT select PXA_SHARP_Cxx00
help select MACH_SPITZ
Say Y here if you intend to run this kernel on a Cogent select I2C
CSB726 System On Module. select I2C_PXA
config CSB726_CSB701 config MACH_SPITZ
bool "Enable supprot for CSB701 baseboard" bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
depends on MACH_CSB726 depends on PXA_SHARPSL
select PXA27x
select PXA_SHARP_Cxx00
config PXA_EZX config MACH_BORZOI
bool "Motorola EZX Platform" bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
depends on PXA_SHARPSL
select PXA27x select PXA27x
select IWMMXT select PXA_SHARP_Cxx00
select HAVE_PWM
config MACH_TOSA
bool "Enable Sharp SL-6000x (Tosa) Support"
depends on PXA_SHARPSL
select PXA25x
select PXA_HAVE_BOARD_IRQS select PXA_HAVE_BOARD_IRQS
config MACH_EZX_A780 config ARCH_PXA_ESERIES
bool "Motorola EZX A780" bool "PXA based Toshiba e-series PDAs"
default y select PXA25x
depends on PXA_EZX select PXA_HAVE_BOARD_IRQS
config MACH_EZX_E680 config MACH_E330
bool "Motorola EZX E680" bool "Toshiba e330"
default y default y
depends on PXA_EZX depends on ARCH_PXA_ESERIES
help
Say Y here if you intend to run this kernel on a Toshiba
e330 family PDA.
config MACH_EZX_A1200 config MACH_E350
bool "Motorola EZX A1200" bool "Toshiba e350"
default y default y
depends on PXA_EZX depends on ARCH_PXA_ESERIES
help
Say Y here if you intend to run this kernel on a Toshiba
e350 family PDA.
config MACH_EZX_A910 config MACH_E740
bool "Motorola EZX A910" bool "Toshiba e740"
default y default y
depends on PXA_EZX depends on ARCH_PXA_ESERIES
select FB_W100
help
Say Y here if you intend to run this kernel on a Toshiba
e740 family PDA.
config MACH_EZX_E6 config MACH_E750
bool "Motorola EZX E6" bool "Toshiba e750"
default y default y
depends on PXA_EZX depends on ARCH_PXA_ESERIES
select FB_W100
help
Say Y here if you intend to run this kernel on a Toshiba
e750 family PDA.
config MACH_EZX_E2 config MACH_E400
bool "Motorola EZX E2" bool "Toshiba e400"
default y default y
depends on PXA_EZX depends on ARCH_PXA_ESERIES
help
Say Y here if you intend to run this kernel on a Toshiba
e400 family PDA.
config MACH_XCEP config MACH_E800
bool "Iskratel Electronics XCEP" bool "Toshiba e800"
select PXA25x default y
select MTD depends on ARCH_PXA_ESERIES
select MTD_PARTITIONS select FB_W100
select MTD_PHYSMAP
select MTD_CFI_INTELEXT
select MTD_CFI
select MTD_CHAR
select SMC91X
select PXA_SSP
help help
PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash. Say Y here if you intend to run this kernel on a Toshiba
Tuned for usage in Libera instruments for particle accelerators. e800 family PDA.
endmenu endmenu
......
...@@ -24,33 +24,66 @@ obj-$(CONFIG_CPU_PXA300) += pxa300.o ...@@ -24,33 +24,66 @@ obj-$(CONFIG_CPU_PXA300) += pxa300.o
obj-$(CONFIG_CPU_PXA320) += pxa320.o obj-$(CONFIG_CPU_PXA320) += pxa320.o
obj-$(CONFIG_CPU_PXA930) += pxa930.o obj-$(CONFIG_CPU_PXA930) += pxa930.o
# Specific board support # NOTE: keep the order of boards in accordance to their order in Kconfig
obj-$(CONFIG_ARCH_GUMSTIX) += gumstix.o
obj-$(CONFIG_GUMSTIX_AM200EPD) += am200epd.o # Intel/Marvell Dev Platforms
obj-$(CONFIG_GUMSTIX_AM300EPD) += am300epd.o
obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o
obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o
obj-$(CONFIG_MACH_BALLOON3) += balloon3.o ifeq ($(CONFIG_MACH_ZYLONITE),y)
obj-$(CONFIG_MACH_MP900C) += mp900.o obj-y += zylonite.o
obj-$(CONFIG_CPU_PXA300) += zylonite_pxa300.o
obj-$(CONFIG_CPU_PXA320) += zylonite_pxa320.o
endif
obj-$(CONFIG_MACH_LITTLETON) += littleton.o
obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o
obj-$(CONFIG_MACH_SAAR) += saar.o
# 3rd Party Dev Platforms
obj-$(CONFIG_ARCH_PXA_IDP) += idp.o obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
obj-$(CONFIG_ARCH_VIPER) += viper.o
obj-$(CONFIG_MACH_BALLOON3) += balloon3.o
obj-$(CONFIG_MACH_CSB726) += csb726.o
obj-$(CONFIG_CSB726_CSB701) += csb701.o
obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx.o cm-x255.o cm-x270.o
ifeq ($(CONFIG_PCI),y)
obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx-pci.o
endif
obj-$(CONFIG_MACH_EM_X270) += em-x270.o
obj-$(CONFIG_MACH_CM_X300) += cm-x300.o
obj-$(CONFIG_ARCH_GUMSTIX) += gumstix.o
obj-$(CONFIG_GUMSTIX_AM200EPD) += am200epd.o
obj-$(CONFIG_GUMSTIX_AM300EPD) += am300epd.o
obj-$(CONFIG_MACH_INTELMOTE2) += imote2.o
obj-$(CONFIG_MACH_STARGATE2) += stargate2.o
obj-$(CONFIG_MACH_XCEP) += xcep.o
obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o
obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
obj-$(CONFIG_MACH_PCM027) += pcm027.o
obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o
obj-$(CONFIG_MACH_COLIBRI) += colibri-pxa270.o obj-$(CONFIG_MACH_COLIBRI) += colibri-pxa270.o
obj-$(CONFIG_MACH_COLIBRI300) += colibri-pxa3xx.o colibri-pxa300.o obj-$(CONFIG_MACH_COLIBRI300) += colibri-pxa3xx.o colibri-pxa300.o
obj-$(CONFIG_MACH_COLIBRI320) += colibri-pxa3xx.o colibri-pxa320.o obj-$(CONFIG_MACH_COLIBRI320) += colibri-pxa3xx.o colibri-pxa320.o
# End-user Products
obj-$(CONFIG_MACH_H4700) += hx4700.o
obj-$(CONFIG_MACH_H5000) += h5000.o obj-$(CONFIG_MACH_H5000) += h5000.o
obj-$(CONFIG_MACH_HIMALAYA) += himalaya.o
obj-$(CONFIG_MACH_MAGICIAN) += magician.o
obj-$(CONFIG_MACH_MIOA701) += mioa701.o mioa701_bootresume.o
obj-$(CONFIG_PXA_EZX) += ezx.o
obj-$(CONFIG_MACH_MP900C) += mp900.o
obj-$(CONFIG_MACH_PALMTE2) += palmte2.o
obj-$(CONFIG_MACH_PALMTC) += palmtc.o
obj-$(CONFIG_MACH_PALMT5) += palmt5.o
obj-$(CONFIG_MACH_PALMTX) += palmtx.o
obj-$(CONFIG_MACH_PALMZ72) += palmz72.o
obj-$(CONFIG_MACH_PALMLD) += palmld.o
obj-$(CONFIG_PALM_TREO) += palmtreo.o
obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o sharpsl_pm.o corgi_pm.o obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o sharpsl_pm.o corgi_pm.o
obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o sharpsl_pm.o spitz_pm.o obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o sharpsl_pm.o spitz_pm.o
obj-$(CONFIG_CORGI_SSP_DEPRECATED) += corgi_ssp.o corgi_lcd.o obj-$(CONFIG_CORGI_SSP_DEPRECATED) += corgi_ssp.o corgi_lcd.o
obj-$(CONFIG_MACH_POODLE) += poodle.o obj-$(CONFIG_MACH_POODLE) += poodle.o
obj-$(CONFIG_MACH_PCM027) += pcm027.o
obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o
obj-$(CONFIG_MACH_TOSA) += tosa.o obj-$(CONFIG_MACH_TOSA) += tosa.o
obj-$(CONFIG_MACH_EM_X270) += em-x270.o
obj-$(CONFIG_MACH_H4700) += hx4700.o
obj-$(CONFIG_MACH_MAGICIAN) += magician.o
obj-$(CONFIG_MACH_HIMALAYA) += himalaya.o
obj-$(CONFIG_MACH_MIOA701) += mioa701.o mioa701_bootresume.o
obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o
obj-$(CONFIG_MACH_E330) += e330.o obj-$(CONFIG_MACH_E330) += e330.o
obj-$(CONFIG_MACH_E350) += e350.o obj-$(CONFIG_MACH_E350) += e350.o
...@@ -58,34 +91,6 @@ obj-$(CONFIG_MACH_E740) += e740.o ...@@ -58,34 +91,6 @@ obj-$(CONFIG_MACH_E740) += e740.o
obj-$(CONFIG_MACH_E750) += e750.o obj-$(CONFIG_MACH_E750) += e750.o
obj-$(CONFIG_MACH_E400) += e400.o obj-$(CONFIG_MACH_E400) += e400.o
obj-$(CONFIG_MACH_E800) += e800.o obj-$(CONFIG_MACH_E800) += e800.o
obj-$(CONFIG_MACH_PALMTE2) += palmte2.o
obj-$(CONFIG_MACH_PALMTC) += palmtc.o
obj-$(CONFIG_MACH_PALMT5) += palmt5.o
obj-$(CONFIG_MACH_PALMTX) += palmtx.o
obj-$(CONFIG_MACH_PALMLD) += palmld.o
obj-$(CONFIG_MACH_PALMZ72) += palmz72.o
obj-$(CONFIG_PALM_TREO) += palmtreo.o
obj-$(CONFIG_ARCH_VIPER) += viper.o
ifeq ($(CONFIG_MACH_ZYLONITE),y)
obj-y += zylonite.o
obj-$(CONFIG_CPU_PXA300) += zylonite_pxa300.o
obj-$(CONFIG_CPU_PXA320) += zylonite_pxa320.o
endif
obj-$(CONFIG_MACH_LITTLETON) += littleton.o
obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o
obj-$(CONFIG_MACH_SAAR) += saar.o
obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx.o cm-x255.o cm-x270.o
obj-$(CONFIG_MACH_CM_X300) += cm-x300.o
obj-$(CONFIG_PXA_EZX) += ezx.o
obj-$(CONFIG_MACH_XCEP) += xcep.o
obj-$(CONFIG_MACH_INTELMOTE2) += imote2.o
obj-$(CONFIG_MACH_STARGATE2) += stargate2.o
obj-$(CONFIG_MACH_CSB726) += csb726.o
obj-$(CONFIG_CSB726_CSB701) += csb701.o
# Support for blinky lights # Support for blinky lights
led-y := leds.o led-y := leds.o
...@@ -95,8 +100,4 @@ led-$(CONFIG_ARCH_PXA_IDP) += leds-idp.o ...@@ -95,8 +100,4 @@ led-$(CONFIG_ARCH_PXA_IDP) += leds-idp.o
obj-$(CONFIG_LEDS) += $(led-y) obj-$(CONFIG_LEDS) += $(led-y)
ifeq ($(CONFIG_PCI),y)
obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx-pci.o
endif
obj-$(CONFIG_TOSA_BT) += tosa-bt.o obj-$(CONFIG_TOSA_BT) += tosa-bt.o
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment