Commit de533ccf authored by Hans Verkuil's avatar Hans Verkuil Committed by Mauro Carvalho Chehab

V4L/DVB (3580): Last round of msp3400 cleanups before adding routing commands

Lots of cleanups:
- remove duplicate actions
- add D/K3 Dual FM-Stereo and D/K NICAM FM (HDEV3) support
- put prescales in the proper place
- add missing D/K NICAM
- msp34xxg_reset now only resets instead of also starting the autodetect
  (moved that to msp34xxg_thread)
- fix support for SAP.
Signed-off-by: default avatarHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@infradead.org>
parent 9a80a93d
......@@ -622,6 +622,7 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg)
if (va->mode != 0 && state->radio == 0) {
state->audmode = msp_mode_v4l1_to_v4l2(va->mode);
msp_set_audmode(client);
}
break;
}
......@@ -707,7 +708,6 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg)
if (scart >= 0) {
state->rxsubchans = V4L2_TUNER_SUB_STEREO;
msp_set_scart(client, scart, 0);
msp_write_dsp(client, 0x000d, 0x1900);
}
msp_set_audmode(client);
msp_wake_thread(client);
......
......@@ -44,11 +44,13 @@ static struct {
{ 0x0004, MSP_CARRIER(6.5), MSP_CARRIER(6.2578125), "6.5/6.25 D/K1 Dual FM-Stereo" },
{ 0x0005, MSP_CARRIER(6.5), MSP_CARRIER(6.7421875), "6.5/6.74 D/K2 Dual FM-Stereo" },
{ 0x0006, MSP_CARRIER(6.5), MSP_CARRIER(6.5), "6.5 D/K FM-Mono (HDEV3)" },
{ 0x0007, MSP_CARRIER(6.5), MSP_CARRIER(5.7421875), "6.5/5.74 D/K3 Dual FM-Stereo" },
{ 0x0008, MSP_CARRIER(5.5), MSP_CARRIER(5.85), "5.5/5.85 B/G NICAM FM" },
{ 0x0009, MSP_CARRIER(6.5), MSP_CARRIER(5.85), "6.5/5.85 L NICAM AM" },
{ 0x000a, MSP_CARRIER(6.0), MSP_CARRIER(6.55), "6.0/6.55 I NICAM FM" },
{ 0x000b, MSP_CARRIER(6.5), MSP_CARRIER(5.85), "6.5/5.85 D/K NICAM FM" },
{ 0x000c, MSP_CARRIER(6.5), MSP_CARRIER(5.85), "6.5/5.85 D/K NICAM FM (HDEV2)" },
{ 0x000d, MSP_CARRIER(6.5), MSP_CARRIER(5.85), "6.5/5.85 D/K NICAM FM (HDEV3)" },
{ 0x0020, MSP_CARRIER(4.5), MSP_CARRIER(4.5), "4.5 M BTSC-Stereo" },
{ 0x0021, MSP_CARRIER(4.5), MSP_CARRIER(4.5), "4.5 M BTSC-Mono + SAP" },
{ 0x0030, MSP_CARRIER(4.5), MSP_CARRIER(4.5), "4.5 M EIA-J Japan Stereo" },
......@@ -206,12 +208,13 @@ void msp3400c_set_mode(struct i2c_client *client, int mode)
msp3400c_set_carrier(client, data->cdo1, data->cdo2);
msp_set_source(client, data->dsp_src);
msp_write_dsp(client, 0x000e, data->dsp_matrix);
/* set prescales */
if (state->has_nicam) {
/* nicam prescale */
msp_write_dsp(client, 0x0010, 0x5a00); /* was: 0x3000 */
}
/* volume prescale for SCART (AM mono input) */
msp_write_dsp(client, 0x000d, 0x1900);
msp_write_dsp(client, 0x000e, data->dsp_matrix);
if (state->has_nicam) /* nicam prescale */
msp_write_dsp(client, 0x0010, 0x5a00);
}
/* Set audio mode. Note that the pre-'G' models do not support BTSC+SAP,
......@@ -270,7 +273,6 @@ static void msp3400c_set_audmode(struct i2c_client *client)
case MSP_MODE_FM_NICAM2:
case MSP_MODE_AM_NICAM:
v4l_dbg(1, msp_debug, client, "NICAM set_audmode: %s\n",modestr);
msp3400c_set_carrier(client, state->second, state->main);
if (state->nicam_on)
src = 0x0100; /* NICAM */
break;
......@@ -426,8 +428,8 @@ static void watch_stereo(struct i2c_client *client)
{
struct msp_state *state = i2c_get_clientdata(client);
if (msp3400c_detect_stereo(client)) {
msp3400c_set_audmode(client);
if (msp_detect_stereo(client)) {
msp_set_audmode(client);
}
if (msp_once)
......@@ -463,7 +465,7 @@ int msp3400c_thread(void *data)
/* mute */
msp_set_mute(client);
msp3400c_set_mode(client, MSP_MODE_AM_DETECT /* +1 */ );
msp3400c_set_mode(client, MSP_MODE_AM_DETECT);
val1 = val2 = 0;
max1 = max2 = -1;
state->watch_stereo = 0;
......@@ -571,8 +573,6 @@ int msp3400c_thread(void *data)
state->second = msp3400c_carrier_detect_65[max2].cdo;
msp3400c_set_mode(client, MSP_MODE_AM_NICAM);
msp3400c_set_carrier(client, state->second, state->main);
/* volume prescale for SCART (AM mono input) */
msp_write_dsp(client, 0x000d, 0x1900);
state->watch_stereo = 1;
} else if (max2 == 0 && state->has_nicam) {
/* D/K NICAM */
......@@ -650,7 +650,8 @@ int msp3410d_thread(void *data)
if (msp_sleep(state,200))
goto restart;
/* start autodetect */
/* start autodetect. Note: autodetect is not supported for
NTSC-M and radio, hence we force the standard in those cases. */
if (state->radio)
std = 0x40;
else
......@@ -694,23 +695,19 @@ int msp3410d_thread(void *data)
v4l_dbg(1, msp_debug, client, "autodetection failed,"
" switching to backup standard: %s (0x%04x)\n",
msp_stdlist[8].name ? msp_stdlist[8].name : "unknown",val);
val = 0x0009;
state->std = val = 0x0009;
msp_write_dem(client, 0x20, val);
}
/* set various prescales */
msp_write_dsp(client, 0x0d, 0x1900); /* scart */
msp_write_dsp(client, 0x0e, 0x2403); /* FM */
msp_write_dsp(client, 0x10, 0x5a00); /* nicam */
/* set stereo */
switch (val) {
case 0x0008: /* B/G NICAM */
case 0x000a: /* I NICAM */
if (val == 0x0008)
state->mode = MSP_MODE_FM_NICAM1;
else
case 0x000b: /* D/K NICAM */
if (val == 0x000a)
state->mode = MSP_MODE_FM_NICAM2;
else
state->mode = MSP_MODE_FM_NICAM1;
/* just turn on stereo */
state->rxsubchans = V4L2_TUNER_SUB_STEREO;
state->nicam_on = 1;
......@@ -738,6 +735,7 @@ int msp3410d_thread(void *data)
/* scart routing (this doesn't belong here I think) */
msp_set_scart(client,SCART_IN2,0);
break;
case 0x0002:
case 0x0003:
case 0x0004:
case 0x0005:
......@@ -747,12 +745,19 @@ int msp3410d_thread(void *data)
break;
}
/* unmute, restore misc registers */
msp_set_audio(client);
msp_write_dsp(client, 0x13, state->acb);
/* set various prescales */
msp_write_dsp(client, 0x0d, 0x1900); /* scart */
msp_write_dsp(client, 0x0e, 0x3000); /* FM */
if (state->has_nicam)
msp_write_dsp(client, 0x10, 0x5a00); /* nicam */
if (state->has_i2s_conf)
msp_write_dem(client, 0x40, state->i2s_mode);
/* unmute, restore misc registers */
msp_set_audio(client);
msp_write_dsp(client, 0x13, state->acb);
msp3400c_set_audmode(client);
/* monitor tv audio mode, the first time don't wait
......@@ -771,16 +776,15 @@ int msp3410d_thread(void *data)
/* ----------------------------------------------------------------------- */
/* msp34xxG + (autoselect no-thread) */
/* this one uses both automatic standard detection and automatic sound */
/* select which are available in the newer G versions */
/* struct msp: only norm, acb and source are really used in this mode */
/* msp34xxG + (autoselect no-thread)
* this one uses both automatic standard detection and automatic sound
* select which are available in the newer G versions
* struct msp: only norm, acb and source are really used in this mode
*/
/* set the same 'source' for the loudspeaker, scart and quasi-peak detector
* the value for source is the same as bit 15:8 of DSP registers 0x08,
* 0x0a and 0x0c: 0=mono, 1=stereo or A|B, 2=SCART, 3=stereo or A, 4=stereo or B
*
* this function replaces msp3400c_set_audmode
*/
static void msp34xxg_set_source(struct i2c_client *client, int source)
{
......@@ -838,58 +842,56 @@ static int msp34xxg_modus(struct i2c_client *client)
return 0x0001;
}
/* (re-)initialize the msp34xxg, according to the current norm in state->norm
* return 0 if it worked, -1 if it failed
*/
static int msp34xxg_reset(struct i2c_client *client)
/* (re-)initialize the msp34xxg */
static void msp34xxg_reset(struct i2c_client *client)
{
struct msp_state *state = i2c_get_clientdata(client);
int modus, std;
int modus;
if (msp_reset(client))
return -1;
/* initialize std to 1 (autodetect) to signal that no standard is
selected yet. */
state->std = 1;
msp_reset(client);
/* make sure that input/output is muted (paranoid mode) */
/* ACB, mute DSP input, mute SCART 1 */
if (msp_write_dsp(client, 0x13, 0x0f20))
return -1;
msp_write_dsp(client, 0x13, 0x0f20);
if (state->has_i2s_conf)
msp_write_dem(client, 0x40, state->i2s_mode);
/* step-by-step initialisation, as described in the manual */
modus = msp34xxg_modus(client);
if (state->radio)
std = 0x40;
else
std = (state->v4l2_std & V4L2_STD_NTSC) ? 0x20 : 1;
modus &= ~0x03; /* STATUS_CHANGE = 0 */
modus |= 0x01; /* AUTOMATIC_SOUND_DETECTION = 1 */
if (msp_write_dem(client, 0x30, modus))
return -1;
if (msp_write_dem(client, 0x20, std))
return -1;
msp_write_dem(client, 0x30, modus);
/* write the dsps that may have an influence on
standard/audio autodetection right now */
msp34xxg_set_source(client, state->source);
/* AM/FM Prescale [15:8] 75khz deviation */
if (msp_write_dsp(client, 0x0e, 0x3000))
return -1;
/* NICAM Prescale 9db gain (as recommended) */
if (msp_write_dsp(client, 0x10, 0x5a00))
return -1;
msp_write_dsp(client, 0x0d, 0x1900); /* scart */
msp_write_dsp(client, 0x0e, 0x3000); /* FM */
if (state->has_nicam)
msp_write_dsp(client, 0x10, 0x5a00); /* nicam */
return 0;
/* set identification threshold. Personally, I
* I set it to a higher value than the default
* of 0x190 to ignore noisy stereo signals.
* this needs tuning. (recommended range 0x00a0-0x03c0)
* 0x7f0 = forced mono mode
*
* a2 threshold for stereo/bilingual.
* Note: this register is part of the Manual/Compatibility mode.
* It is supported by all 'G'-family chips.
*/
msp_write_dem(client, 0x22, msp_stereo_thresh);
}
int msp34xxg_thread(void *data)
{
struct i2c_client *client = data;
struct msp_state *state = i2c_get_clientdata(client);
int val, std, i;
int val, i;
v4l_dbg(1, msp_debug, client, "msp34xxg daemon started\n");
......@@ -907,12 +909,14 @@ int msp34xxg_thread(void *data)
/* setup the chip*/
msp34xxg_reset(client);
std = msp_standard;
if (std != 0x01)
state->std = state->radio ? 0x40 : msp_standard;
if (state->std != 1)
goto unmute;
/* start autodetect */
msp_write_dem(client, 0x20, state->std);
/* watch autodetect */
v4l_dbg(1, msp_debug, client, "triggered autodetect, waiting for result\n");
v4l_dbg(1, msp_debug, client, "started autodetect, waiting for result\n");
for (i = 0; i < 10; i++) {
if (msp_sleep(state, 100))
goto restart;
......@@ -920,20 +924,19 @@ int msp34xxg_thread(void *data)
/* check results */
val = msp_read_dem(client, 0x7e);
if (val < 0x07ff) {
std = val;
state->std = val;
break;
}
v4l_dbg(2, msp_debug, client, "detection still in progress\n");
}
if (std == 1) {
if (state->std == 1) {
v4l_dbg(1, msp_debug, client, "detection still in progress after 10 tries. giving up.\n");
continue;
}
unmute:
state->std = std;
v4l_dbg(1, msp_debug, client, "current standard: %s (0x%04x)\n",
msp_standard_std_name(std), std);
v4l_dbg(1, msp_debug, client, "detected standard: %s (0x%04x)\n",
msp_standard_std_name(state->std), state->std);
/* unmute: dispatch sound to scart output, set scart volume */
msp_set_audio(client);
......@@ -942,20 +945,33 @@ int msp34xxg_thread(void *data)
if (msp_write_dsp(client, 0x13, state->acb))
return -1;
if (state->has_i2s_conf)
msp_write_dem(client, 0x40, state->i2s_mode);
/* the periodic stereo/SAP check is only relevant for
the 0x20 standard (BTSC) */
if (state->std != 0x20)
continue;
state->watch_stereo = 1;
/* monitor tv audio mode, the first time don't wait
in order to get a quick stereo/SAP update */
watch_stereo(client);
while (state->watch_stereo) {
watch_stereo(client);
if (msp_sleep(state, 5000))
goto restart;
}
}
v4l_dbg(1, msp_debug, client, "thread: exit\n");
return 0;
}
static void msp34xxg_detect_stereo(struct i2c_client *client)
static int msp34xxg_detect_stereo(struct i2c_client *client)
{
struct msp_state *state = i2c_get_clientdata(client);
int status = msp_read_dem(client, 0x0200);
int is_bilingual = status & 0x100;
int is_stereo = status & 0x40;
int oldrx = state->rxsubchans;
state->rxsubchans = 0;
if (is_stereo)
......@@ -963,16 +979,14 @@ static void msp34xxg_detect_stereo(struct i2c_client *client)
else
state->rxsubchans = V4L2_TUNER_SUB_MONO;
if (is_bilingual) {
if (state->std == 0x20)
state->rxsubchans |= V4L2_TUNER_SUB_SAP;
else
state->rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
/* I'm supposed to check whether it's SAP or not
* and set only LANG2/SAP in this case. Yet, the MSP
* does a lot of work to hide this and handle everything
* the same way. I don't want to work around it so unless
* this is a problem, I'll handle SAP just like lang1/lang2.
*/
}
v4l_dbg(1, msp_debug, client, "status=0x%x, stereo=%d, bilingual=%d -> rxsubchans=%d\n",
status, is_stereo, is_bilingual, state->rxsubchans);
return (oldrx != state->rxsubchans);
}
static void msp34xxg_set_audmode(struct i2c_client *client)
......@@ -980,6 +994,16 @@ static void msp34xxg_set_audmode(struct i2c_client *client)
struct msp_state *state = i2c_get_clientdata(client);
int source;
if (state->std == 0x20) {
if ((state->rxsubchans & V4L2_TUNER_SUB_SAP) &&
(state->audmode == V4L2_TUNER_MODE_STEREO ||
state->audmode == V4L2_TUNER_MODE_LANG2)) {
msp_write_dem(client, 0x20, 0x21);
} else {
msp_write_dem(client, 0x20, 0x20);
}
}
switch (state->audmode) {
case V4L2_TUNER_MODE_MONO:
source = 0; /* mono only */
......@@ -1008,7 +1032,6 @@ void msp_set_audmode(struct i2c_client *client)
switch (state->opmode) {
case OPMODE_MANUAL:
case OPMODE_AUTODETECT:
state->watch_stereo = 0;
msp3400c_set_audmode(client);
break;
case OPMODE_AUTOSELECT:
......@@ -1017,18 +1040,17 @@ void msp_set_audmode(struct i2c_client *client)
}
}
void msp_detect_stereo(struct i2c_client *client)
int msp_detect_stereo(struct i2c_client *client)
{
struct msp_state *state = i2c_get_clientdata(client);
switch (state->opmode) {
case OPMODE_MANUAL:
case OPMODE_AUTODETECT:
msp3400c_detect_stereo(client);
break;
return msp3400c_detect_stereo(client);
case OPMODE_AUTOSELECT:
msp34xxg_detect_stereo(client);
break;
return msp34xxg_detect_stereo(client);
}
return 0;
}
......@@ -103,7 +103,7 @@ int msp_sleep(struct msp_state *state, int timeout);
/* msp3400-kthreads.c */
const char *msp_standard_std_name(int std);
void msp_set_audmode(struct i2c_client *client);
void msp_detect_stereo(struct i2c_client *client);
int msp_detect_stereo(struct i2c_client *client);
int msp3400c_thread(void *data);
int msp3410d_thread(void *data);
int msp34xxg_thread(void *data);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment