arm64: dts: qcom: sc7280: Configure SPI-NOR FLASH for sc7280-idp

Add spi-nor flash node and pinctrl configurations for the SC7280 IDP.
Signed-off-by: Rajesh Patil <rajpat@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1632399378-12229-4-git-send-email-rajpat@codeaurora.org

arch/arm64/boot/dts/qcom/sc7280-idp.dtsi

@@ -232,6 +232,20 @@ &qfprom {
 	vcc-supply = <&vreg_l1c_1p8>;
 };
 
+&qspi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data01>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <37500000>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+	};
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
@@ -320,6 +334,19 @@ key_vol_up_default: key-vol-up-default {
 	};
 };
 
+&qspi_cs0 {
+	bias-disable;
+};
+
+&qspi_clk {
+	bias-disable;
+};
+
+&qspi_data01 {
+	/* High-Z when no transfers; nice to park the lines */
+	bias-pull-up;
+};
+
 &qup_uart5_default {
 	tx {
 		pins = "gpio46";