Commit df3a950e authored by Zubair Lutfullah Kakakhel's avatar Zubair Lutfullah Kakakhel Committed by Mark Brown

regulator: act8865: Add act8600 support

This patch adds act8600 support to the act8865 driver.

VBUS and USB charger supported by this chip can be added later

Tested on MIPS Creator CI20
Signed-off-by: default avatarZubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent c517d838
......@@ -2,7 +2,7 @@ ACT88xx regulators
-------------------
Required properties:
- compatible: "active-semi,act8846" or "active-semi,act8865"
- compatible: "active-semi,act8846" or "active-semi,act8865" or "active-semi,act8600"
- reg: I2C slave address
Optional properties:
......@@ -16,6 +16,9 @@ The valid names for regulators are:
REG1, REG2, REG3, REG4, REG5, REG6, REG7, REG8, REG9, REG10, REG11, REG12
- for act8865:
DCDC_REG1, DCDC_REG2, DCDC_REG3, LDO_REG1, LDO_REG2, LDO_REG3, LDO_REG4.
- for act8600:
DCDC_REG1, DCDC_REG2, DCDC_REG3, SUDCDC_REG4, LDO_REG5, LDO_REG6, LDO_REG7,
LDO_REG8, LDO_REG9, LDO_REG10,
Example:
--------
......
......@@ -28,6 +28,35 @@
#include <linux/regulator/of_regulator.h>
#include <linux/regmap.h>
/*
* ACT8600 Global Register Map.
*/
#define ACT8600_SYS_MODE 0x00
#define ACT8600_SYS_CTRL 0x01
#define ACT8600_DCDC1_VSET 0x10
#define ACT8600_DCDC1_CTRL 0x12
#define ACT8600_DCDC2_VSET 0x20
#define ACT8600_DCDC2_CTRL 0x22
#define ACT8600_DCDC3_VSET 0x30
#define ACT8600_DCDC3_CTRL 0x32
#define ACT8600_SUDCDC4_VSET 0x40
#define ACT8600_SUDCDC4_CTRL 0x41
#define ACT8600_LDO5_VSET 0x50
#define ACT8600_LDO5_CTRL 0x51
#define ACT8600_LDO6_VSET 0x60
#define ACT8600_LDO6_CTRL 0x61
#define ACT8600_LDO7_VSET 0x70
#define ACT8600_LDO7_CTRL 0x71
#define ACT8600_LDO8_VSET 0x80
#define ACT8600_LDO8_CTRL 0x81
#define ACT8600_LDO910_CTRL 0x91
#define ACT8600_APCH0 0xA1
#define ACT8600_APCH1 0xA8
#define ACT8600_APCH2 0xA9
#define ACT8600_APCH_STAT 0xAA
#define ACT8600_OTG0 0xB0
#define ACT8600_OTG1 0xB2
/*
* ACT8846 Global Register Map.
*/
......@@ -94,10 +123,15 @@
#define ACT8865_ENA 0x80 /* ON - [7] */
#define ACT8865_VSEL_MASK 0x3F /* VSET - [5:0] */
#define ACT8600_LDO10_ENA 0x40 /* ON - [6] */
#define ACT8600_SUDCDC_VSEL_MASK 0xFF /* SUDCDC VSET - [7:0] */
/*
* ACT8865 voltage number
*/
#define ACT8865_VOLTAGE_NUM 64
#define ACT8600_SUDCDC_VOLTAGE_NUM 255
struct act8865 {
struct regmap *regmap;
......@@ -116,6 +150,13 @@ static const struct regulator_linear_range act8865_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(2400000, 48, 63, 100000),
};
static const struct regulator_linear_range act8600_sudcdc_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(3000000, 0, 63, 0),
REGULATOR_LINEAR_RANGE(3000000, 64, 159, 100000),
REGULATOR_LINEAR_RANGE(12600000, 160, 191, 200000),
REGULATOR_LINEAR_RANGE(19000000, 191, 255, 400000),
};
static struct regulator_ops act8865_ops = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
......@@ -126,6 +167,12 @@ static struct regulator_ops act8865_ops = {
.is_enabled = regulator_is_enabled_regmap,
};
static struct regulator_ops act8865_ldo_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
};
#define ACT88xx_REG(_name, _family, _id, _vsel_reg) \
[_family##_ID_##_id] = { \
.name = _name, \
......@@ -142,6 +189,52 @@ static struct regulator_ops act8865_ops = {
.owner = THIS_MODULE, \
}
static const struct regulator_desc act8600_regulators[] = {
ACT88xx_REG("DCDC1", ACT8600, DCDC1, VSET),
ACT88xx_REG("DCDC2", ACT8600, DCDC2, VSET),
ACT88xx_REG("DCDC3", ACT8600, DCDC3, VSET),
{
.name = "SUDCDC_REG4",
.id = ACT8600_ID_SUDCDC4,
.ops = &act8865_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = ACT8600_SUDCDC_VOLTAGE_NUM,
.linear_ranges = act8600_sudcdc_voltage_ranges,
.n_linear_ranges = ARRAY_SIZE(act8600_sudcdc_voltage_ranges),
.vsel_reg = ACT8600_SUDCDC4_VSET,
.vsel_mask = ACT8600_SUDCDC_VSEL_MASK,
.enable_reg = ACT8600_SUDCDC4_CTRL,
.enable_mask = ACT8865_ENA,
.owner = THIS_MODULE,
},
ACT88xx_REG("LDO5", ACT8600, LDO5, VSET),
ACT88xx_REG("LDO6", ACT8600, LDO6, VSET),
ACT88xx_REG("LDO7", ACT8600, LDO7, VSET),
ACT88xx_REG("LDO8", ACT8600, LDO8, VSET),
{
.name = "LDO_REG9",
.id = ACT8600_ID_LDO9,
.ops = &act8865_ldo_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = 1,
.fixed_uV = 1800000,
.enable_reg = ACT8600_LDO910_CTRL,
.enable_mask = ACT8865_ENA,
.owner = THIS_MODULE,
},
{
.name = "LDO_REG10",
.id = ACT8600_ID_LDO10,
.ops = &act8865_ldo_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = 1,
.fixed_uV = 1200000,
.enable_reg = ACT8600_LDO910_CTRL,
.enable_mask = ACT8600_LDO10_ENA,
.owner = THIS_MODULE,
},
};
static const struct regulator_desc act8846_regulators[] = {
ACT88xx_REG("REG1", ACT8846, REG1, VSET),
ACT88xx_REG("REG2", ACT8846, REG2, VSET0),
......@@ -169,6 +262,7 @@ static const struct regulator_desc act8865_regulators[] = {
#ifdef CONFIG_OF
static const struct of_device_id act8865_dt_ids[] = {
{ .compatible = "active-semi,act8600", .data = (void *)ACT8600 },
{ .compatible = "active-semi,act8846", .data = (void *)ACT8846 },
{ .compatible = "active-semi,act8865", .data = (void *)ACT8865 },
{ }
......@@ -200,6 +294,19 @@ static struct of_regulator_match act8865_matches[] = {
[ACT8865_ID_LDO4] = { .name = "LDO_REG4"},
};
static struct of_regulator_match act8600_matches[] = {
[ACT8600_ID_DCDC1] = { .name = "DCDC_REG1"},
[ACT8600_ID_DCDC2] = { .name = "DCDC_REG2"},
[ACT8600_ID_DCDC3] = { .name = "DCDC_REG3"},
[ACT8600_ID_SUDCDC4] = { .name = "SUDCDC_REG4"},
[ACT8600_ID_LDO5] = { .name = "LDO_REG5"},
[ACT8600_ID_LDO6] = { .name = "LDO_REG6"},
[ACT8600_ID_LDO7] = { .name = "LDO_REG7"},
[ACT8600_ID_LDO8] = { .name = "LDO_REG8"},
[ACT8600_ID_LDO9] = { .name = "LDO_REG9"},
[ACT8600_ID_LDO10] = { .name = "LDO_REG10"},
};
static int act8865_pdata_from_dt(struct device *dev,
struct device_node **of_node,
struct act8865_platform_data *pdata,
......@@ -217,6 +324,10 @@ static int act8865_pdata_from_dt(struct device *dev,
}
switch (type) {
case ACT8600:
matches = act8600_matches;
num_matches = ARRAY_SIZE(act8600_matches);
break;
case ACT8846:
matches = act8846_matches;
num_matches = ARRAY_SIZE(act8846_matches);
......@@ -317,6 +428,12 @@ static int act8865_pmic_probe(struct i2c_client *client,
}
switch (type) {
case ACT8600:
regulators = act8600_regulators;
num_regulators = ARRAY_SIZE(act8600_regulators);
off_reg = -1;
off_mask = -1;
break;
case ACT8846:
regulators = act8846_regulators;
num_regulators = ARRAY_SIZE(act8846_regulators);
......@@ -366,7 +483,7 @@ static int act8865_pmic_probe(struct i2c_client *client,
}
if (of_device_is_system_power_controller(dev->of_node)) {
if (!pm_power_off) {
if (!pm_power_off && (off_reg > 0)) {
act8865_i2c_client = client;
act8865->off_reg = off_reg;
act8865->off_mask = off_mask;
......@@ -402,6 +519,7 @@ static int act8865_pmic_probe(struct i2c_client *client,
}
static const struct i2c_device_id act8865_ids[] = {
{ .name = "act8600", .driver_data = ACT8600 },
{ .name = "act8846", .driver_data = ACT8846 },
{ .name = "act8865", .driver_data = ACT8865 },
{ },
......
......@@ -18,6 +18,19 @@
#include <linux/regulator/machine.h>
enum {
ACT8600_ID_DCDC1,
ACT8600_ID_DCDC2,
ACT8600_ID_DCDC3,
ACT8600_ID_SUDCDC4,
ACT8600_ID_LDO5,
ACT8600_ID_LDO6,
ACT8600_ID_LDO7,
ACT8600_ID_LDO8,
ACT8600_ID_LDO9,
ACT8600_ID_LDO10,
};
enum {
ACT8865_ID_DCDC1,
ACT8865_ID_DCDC2,
......@@ -46,6 +59,7 @@ enum {
};
enum {
ACT8600,
ACT8865,
ACT8846,
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment