Commit df766e4a authored by james qian wang (Arm Technology China)'s avatar james qian wang (Arm Technology China) Committed by Liviu Dudau

dt/bindings: drm/komeda: Add DT bindings for ARM display processor D71

Add DT bindings documentation for the ARM display processor D71 and later
IPs.

Changes in v4:
- Deleted unnecessary address-cells, size-cells [Liviu Dudau]

Changes in v3:
- Deleted unnecessary property: interrupt-names.
- Dropped 'ports' and moving 'port' up a level.
Signed-off-by: default avatarJames Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Reviewed-by: default avatarLiviu Dudau <liviu.dudau@arm.com>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
[moved in the same directory as the other Arm display bindings]
Signed-off-by: default avatarLiviu Dudau <liviu.dudau@arm.com>
parent bd628c1b
Device Tree bindings for Arm Komeda display driver
Required properties:
- compatible: Should be "arm,mali-d71"
- reg: Physical base address and length of the registers in the system
- interrupts: the interrupt line number of the device in the system
- clocks: A list of phandle + clock-specifier pairs, one for each entry
in 'clock-names'
- clock-names: A list of clock names. It should contain:
- "mclk": for the main processor clock
- "pclk": for the APB interface clock
- #address-cells: Must be 1
- #size-cells: Must be 0
Required properties for sub-node: pipeline@nq
Each device contains one or two pipeline sub-nodes (at least one), each
pipeline node should provide properties:
- reg: Zero-indexed identifier for the pipeline
- clocks: A list of phandle + clock-specifier pairs, one for each entry
in 'clock-names'
- clock-names: should contain:
- "pxclk": pixel clock
- "aclk": AXI interface clock
- port: each pipeline connect to an encoder input port. The connection is
modeled using the OF graph bindings specified in
Documentation/devicetree/bindings/graph.txt
Optional properties:
- memory-region: phandle to a node describing memory (see
Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
to be used for the framebuffer; if not present, the framebuffer may
be located anywhere in memory.
Example:
/ {
...
dp0: display@c00000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "arm,mali-d71";
reg = <0xc00000 0x20000>;
interrupts = <0 168 4>;
clocks = <&dpu_mclk>, <&dpu_aclk>;
clock-names = "mclk", "pclk";
dp0_pipe0: pipeline@0 {
clocks = <&fpgaosc2>, <&dpu_aclk>;
clock-names = "pxclk", "aclk";
reg = <0>;
port {
dp0_pipe0_out: endpoint {
remote-endpoint = <&db_dvi0_in>;
};
};
};
dp0_pipe1: pipeline@1 {
clocks = <&fpgaosc2>, <&dpu_aclk>;
clock-names = "pxclk", "aclk";
reg = <1>;
port {
dp0_pipe1_out: endpoint {
remote-endpoint = <&db_dvi1_in>;
};
};
};
};
...
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment