Skip to content

L
linux
Commit dfc25e45 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge tag 'cleanup-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 

Pull ARM SoC cleanups from Arnd Bergmann:
 "These cleanup patches are mainly move stuff around and should all be
  harmless.  They are mainly split out so that other branches can be
  based on top to avoid conflicts.

  Notable changes are:

   - We finally remove all mach/timex.h, after CLOCK_TICK_RATE is no
     longer used (Uwe Kleine-König)
   - The Qualcomm MSM platform is split out into legacy mach-msm and
     new-style mach-qcom, to allow easier maintainance of the new
     hardware support without regressions (Kumar Gala)
   - A rework of some of the Kconfig logic to simplify multiplatform
     support (Rob Herring)
   - Samsung Exynos gets closer to supporting multiplatform (Sachin
     Kamat and others)
   - mach-bcm3528 gets merged into mach-bcm (Stephen Warren)
   - at91 gains some common clock framework support (Alexandre Belloni,
     Jean-Jacques Hiblot and other French people)"

* tag 'cleanup-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (89 commits)
  ARM: hisi: select HAVE_ARM_SCU only for SMP
  ARM: efm32: allow uncompress debug output
  ARM: prima2: build reset code standalone
  ARM: at91: add PWM clock
  ARM: at91: move sam9261 SoC to common clk
  ARM: at91: prepare common clk transition for sam9261 SoC
  ARM: at91: updated the at91_dt_defconfig with support for the ADS7846
  ARM: at91: dt: sam9261: Device Tree support for the at91sam9261ek
  ARM: at91: dt: defconfig: Added the sam9261 to the list of DT-enabled SOCs
  ARM: at91: dt: Add at91sam9261 dt SoC support
  ARM: at91: switch sam9rl to common clock framework
  ARM: at91/dt: define main clk frequency of at91sam9rlek
  ARM: at91/dt: define at91sam9rl clocks
  ARM: at91: prepare common clk transition for sam9rl SoCs
  ARM: at91: prepare sam9 dt boards transition to common clk
  ARM: at91: dt: sam9rl: Device Tree for the at91sam9rlek
  ARM: at91/defconfig: Add the sam9rl to the list of DT-enabled SOCs
  ARM: at91: Add at91sam9rl DT SoC support
  ARM: at91: prepare at91sam9rl DT transition
  ARM: at91/defconfig: refresh at91sam9260_9g20_defconfig
  ...
parents 9f800363 8f881c67
Expand all Show whitespace changes
Inline Side-by-side
Showing with 2696 additions and 1832 deletions
Documentation/devicetree/bindings/reset/sirf,rstc.txt 0 → 100644
View file @ dfc25e45
CSR SiRFSoC Reset Controller
======================================
Please also refer to reset.txt in this directory for common reset
controller binding usage.
Required properties:
- compatible: Should be "sirf,prima2-rstc" or "sirf,marco-rstc"
- reg: should be register base and length as documented in the
datasheet
- #reset-cells: 1, see below
example:
rstc: reset-controller@88010000 {
compatible = "sirf,prima2-rstc";
reg = <0x88010000 0x1000>;
#reset-cells = <1>;
};
Specifying reset lines connected to IP modules
==============================================
The reset controller(rstc) manages various reset sources. This module provides
reset signals for most blocks in system. Those device nodes should specify the
reset line on the rstc in their resets property, containing a phandle to the
rstc device node and a RESET_INDEX specifying which module to reset, as described
in reset.txt.
For SiRFSoC, RESET_INDEX is just reset_bit defined in SW_RST0 and SW_RST1 registers.
For modules whose rest_bit is in SW_RST0, its RESET_INDEX is 0~31. For modules whose
rest_bit is in SW_RST1, its RESET_INDEX is 32~63.
example:
vpp@90020000 {
compatible = "sirf,prima2-vpp";
reg = <0x90020000 0x10000>;
interrupts = <31>;
clocks = <&clks 35>;
resets = <&rstc 6>;
};
Documentation/devicetree/bindings/serial/atmel-usart.txt
View file @ dfc25e45
......@@ -13,6 +13,8 @@ Required properties:
Optional properties:
- atmel,use-dma-rx: use of PDC or DMA for receiving data
- atmel,use-dma-tx: use of PDC or DMA for transmitting data
- rts-gpios: specify a GPIO for RTS line. It will use specified PIO instead of the peripheral
function pin for the USART RTS feature. If unsure, don't specify this property.
- add dma bindings for dma transfer:
- dmas: DMA specifier, consisting of a phandle to DMA controller node,
memory peripheral interface and USART DMA channel ID, FIFO configuration.
......@@ -33,6 +35,7 @@ Example:
clock-names = "usart";
atmel,use-dma-rx;
atmel,use-dma-tx;
rts-gpios = <&pioD 15 0>;
};
- use DMA:
......
MAINTAINERS
View file @ dfc25e45
......@@ -1175,6 +1175,14 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.arm.linux.org.uk/
S: Maintained
ARM/QUALCOMM SUPPORT
M: Kumar Gala <galak@codeaurora.org>
M: David Brown <davidb@codeaurora.org>
L: linux-arm-msm@vger.kernel.org
S: Maintained
F: arch/arm/mach-qcom/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom.git
ARM/RADISYS ENP2611 MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
......@@ -1894,7 +1902,7 @@ M: Stephen Warren <swarren@wwwdotorg.org>
L: linux-rpi-kernel@lists.infradead.org (moderated for non-subscribers)
T: git git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi.git
S: Maintained
F: arch/arm/mach-bcm2835/
F: arch/arm/mach-bcm/board_bcm2835.c
F: arch/arm/boot/dts/bcm2835*
F: arch/arm/configs/bcm2835_defconfig
F: drivers/*/*bcm2835*
......
arch/arm/Kconfig
View file @ dfc25e45
......@@ -309,9 +309,11 @@ choice
config ARCH_MULTIPLATFORM
bool "Allow multiple platforms to be selected"
depends on MMU
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_PATCH_PHYS_VIRT
select AUTO_ZRELADDR
select COMMON_CLK
select GENERIC_CLOCKEVENTS
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
select USE_OF
......@@ -425,9 +427,6 @@ config ARCH_EFM32
select ARCH_REQUIRE_GPIOLIB
select AUTO_ZRELADDR
select ARM_NVIC
# CLKSRC_MMIO is wrong here, but needed until a proper fix is merged,
# i.e. CLKSRC_EFM32 selecting CLKSRC_MMIO
select CLKSRC_MMIO
select CLKSRC_OF
select COMMON_CLK
select CPU_V7M
......@@ -659,9 +658,8 @@ config ARCH_PXA
help
Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
config ARCH_MSM_NODT
bool "Qualcomm MSM"
select ARCH_MSM
config ARCH_MSM
bool "Qualcomm MSM (non-multiplatform)"
select ARCH_REQUIRE_GPIOLIB
select COMMON_CLK
select GENERIC_CLOCKEVENTS
......@@ -921,16 +919,18 @@ config ARCH_MULTI_V4_V5
config ARCH_MULTI_V6
bool "ARMv6 based platforms (ARM11)"
select ARCH_MULTI_V6_V7
select CPU_V6
select CPU_V6K
config ARCH_MULTI_V7
bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)"
default y
select ARCH_MULTI_V6_V7
select CPU_V7
select HAVE_SMP
config ARCH_MULTI_V6_V7
bool
select MIGHT_HAVE_CACHE_L2X0
config ARCH_MULTI_CPU_AUTO
def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7)
......@@ -938,6 +938,13 @@ config ARCH_MULTI_CPU_AUTO
endmenu
config ARCH_VIRT
bool "Dummy Virtual Machine" if ARCH_MULTI_V7
select ARM_AMBA
select ARM_GIC
select ARM_PSCI
select HAVE_ARM_ARCH_TIMER
#
# This is sorted alphabetically by mach-* pathname. However, plat-*
# Kconfigs may be included either alphabetically (according to the
......@@ -949,8 +956,6 @@ source "arch/arm/mach-at91/Kconfig"
source "arch/arm/mach-bcm/Kconfig"
source "arch/arm/mach-bcm2835/Kconfig"
source "arch/arm/mach-berlin/Kconfig"
source "arch/arm/mach-clps711x/Kconfig"
......@@ -1018,6 +1023,8 @@ source "arch/arm/plat-pxa/Kconfig"
source "arch/arm/mach-mmp/Kconfig"
source "arch/arm/mach-qcom/Kconfig"
source "arch/arm/mach-realview/Kconfig"
source "arch/arm/mach-rockchip/Kconfig"
......@@ -1061,8 +1068,6 @@ source "arch/arm/mach-versatile/Kconfig"
source "arch/arm/mach-vexpress/Kconfig"
source "arch/arm/plat-versatile/Kconfig"
source "arch/arm/mach-virt/Kconfig"
source "arch/arm/mach-vt8500/Kconfig"
source "arch/arm/mach-w90x900/Kconfig"
......
arch/arm/Kconfig.debug
View file @ dfc25e45
......@@ -956,7 +956,7 @@ config DEBUG_STI_UART
config DEBUG_MSM_UART
bool
depends on ARCH_MSM
depends on ARCH_MSM || ARCH_QCOM
config DEBUG_LL_INCLUDE
string
......@@ -1145,7 +1145,7 @@ config DEBUG_UART_8250_FLOW_CONTROL
config DEBUG_UNCOMPRESS
bool
depends on ARCH_MULTIPLATFORM || ARCH_MSM
depends on ARCH_MULTIPLATFORM || ARCH_MSM || ARCH_EXYNOS
default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
(!DEBUG_TEGRA_UART || !ZBOOT_ROM)
help
......@@ -1161,7 +1161,8 @@ config DEBUG_UNCOMPRESS
config UNCOMPRESS_INCLUDE
string
default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM
default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \
ARCH_EXYNOS || ARCH_EFM32
default "mach/uncompress.h"
config EARLY_PRINTK
......
arch/arm/Makefile
View file @ dfc25e45
......@@ -143,7 +143,6 @@ textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
# by CONFIG_* macro name.
machine-$(CONFIG_ARCH_AT91) += at91
machine-$(CONFIG_ARCH_BCM) += bcm
machine-$(CONFIG_ARCH_BCM2835) += bcm2835
machine-$(CONFIG_ARCH_BERLIN) += berlin
machine-$(CONFIG_ARCH_CLPS711X) += clps711x
machine-$(CONFIG_ARCH_CNS3XXX) += cns3xxx
......@@ -180,6 +179,7 @@ machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2
machine-$(CONFIG_ARCH_ORION5X) += orion5x
machine-$(CONFIG_ARCH_PICOXCELL) += picoxcell
machine-$(CONFIG_ARCH_PXA) += pxa
machine-$(CONFIG_ARCH_QCOM) += qcom
machine-$(CONFIG_ARCH_REALVIEW) += realview
machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip
machine-$(CONFIG_ARCH_RPC) += rpc
......@@ -199,7 +199,6 @@ machine-$(CONFIG_ARCH_U300) += u300
machine-$(CONFIG_ARCH_U8500) += ux500
machine-$(CONFIG_ARCH_VERSATILE) += versatile
machine-$(CONFIG_ARCH_VEXPRESS) += vexpress
machine-$(CONFIG_ARCH_VIRT) += virt
machine-$(CONFIG_ARCH_VT8500) += vt8500
machine-$(CONFIG_ARCH_W90X900) += w90x900
machine-$(CONFIG_ARCH_ZYNQ) += zynq
......
arch/arm/boot/dts/Makefile
View file @ dfc25e45
......@@ -12,6 +12,8 @@ dtb-$(CONFIG_ARCH_AT91) += ethernut5.dtb
dtb-$(CONFIG_ARCH_AT91) += evk-pro3.dtb
dtb-$(CONFIG_ARCH_AT91) += tny_a9260.dtb
dtb-$(CONFIG_ARCH_AT91) += usb_a9260.dtb
# sam9261
dtb-$(CONFIG_ARCH_AT91) += at91sam9261ek.dtb
# sam9263
dtb-$(CONFIG_ARCH_AT91) += at91sam9263ek.dtb
dtb-$(CONFIG_ARCH_AT91) += tny_a9263.dtb
......@@ -29,6 +31,8 @@ dtb-$(CONFIG_ARCH_AT91) += at91sam9m10g45ek.dtb
dtb-$(CONFIG_ARCH_AT91) += pm9g45.dtb
# sam9n12
dtb-$(CONFIG_ARCH_AT91) += at91sam9n12ek.dtb
# sam9rl
dtb-$(CONFIG_ARCH_AT91) += at91sam9rlek.dtb
# sam9x5
dtb-$(CONFIG_ARCH_AT91) += at91-ariag25.dtb
dtb-$(CONFIG_ARCH_AT91) += at91-cosino_mega2560.dtb
......@@ -119,9 +123,6 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
kirkwood-ts219-6282.dtb
dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb
dtb-$(CONFIG_ARCH_MSM) += qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb \
qcom-apq8074-dragonboard.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
armada-370-mirabox.dtb \
armada-370-netgear-rn102.dtb \
......@@ -234,6 +235,9 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
dra7-evm.dtb
dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb
dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb \
qcom-apq8074-dragonboard.dtb
dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \
ste-hrefprev60-stuib.dtb \
ste-hrefprev60-tvk.dtb \
......
arch/arm/boot/dts/at91sam9261.dtsi 0 → 100644
View file @ dfc25e45
This diff is collapsed.
arch/arm/boot/dts/at91sam9261ek.dts 0 → 100644
View file @ dfc25e45
/*
* at91sam9261ek.dts - Device Tree file for Atmel at91sam9261 reference board
*
* Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com>
*
* Licensed under GPLv2 only.
*/
/dts-v1/;
#include "at91sam9261.dtsi"
/ {
model = "Atmel at91sam9261ek";
compatible = "atmel,at91sam9261ek", "atmel,at91sam9261", "atmel,at91sam9";
chosen {
bootargs = "console=ttyS0,115200 rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs rw";
};
memory {
reg = <0x20000000 0x4000000>;
};
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
main_clock: clock@0 {
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <18432000>;
};
};
ahb {
usb0: ohci@00500000 {
status = "okay";
};
fb0: fb@0x00600000 {
display = <&display0>;
atmel,power-control-gpio = <&pioA 12 GPIO_ACTIVE_LOW>;
status = "okay";
display0: display {
bits-per-pixel = <16>;
atmel,lcdcon-backlight;
atmel,dmacon = <0x1>;
atmel,lcdcon2 = <0x80008002>;
atmel,guard-time = <1>;
atmel,lcd-wiring-mode = "BRG";
display-timings {
native-mode = <&timing0>;
timing0: timing0 {
clock-frequency = <4965000>;
hactive = <240>;
vactive = <320>;
hback-porch = <1>;
hfront-porch = <33>;
vback-porch = <1>;
vfront-porch = <0>;
hsync-len = <5>;
vsync-len = <1>;
hsync-active = <1>;
vsync-active = <1>;
};
};
};
};
nand0: nand@40000000 {
nand-bus-width = <8>;
nand-ecc-mode = "soft";
nand-on-flash-bbt;
status = "okay";
at91bootstrap@0 {
label = "at91bootstrap";
reg = <0x0 0x40000>;
};
bootloader@40000 {
label = "bootloader";
reg = <0x40000 0x80000>;
};
bootloaderenv@c0000 {
label = "bootloader env";
reg = <0xc0000 0xc0000>;
};
dtb@180000 {
label = "device tree";
reg = <0x180000 0x80000>;
};
kernel@200000 {
label = "kernel";
reg = <0x200000 0x600000>;
};
rootfs@800000 {
label = "rootfs";
reg = <0x800000 0x0f800000>;
};
};
apb {
usb1: gadget@fffa4000 {
atmel,vbus-gpio = <&pioB 29 GPIO_ACTIVE_HIGH>;
status = "okay";
};
spi0: spi@fffc8000 {
cs-gpios = <&pioA 3 0>, <0>, <&pioA 28 0>, <0>;
status = "okay";
mtd_dataflash@0 {
compatible = "atmel,at45", "atmel,dataflash";
reg = <0>;
spi-max-frequency = <15000000>;
};
tsc2046@0 {
reg = <2>;
compatible = "ti,ads7843";
interrupts-extended = <&pioC 2 IRQ_TYPE_EDGE_BOTH>;
spi-max-frequency = <3000000>;
pendown-gpio = <&pioC 2 GPIO_ACTIVE_HIGH>;
ti,x-min = /bits/ 16 <150>;
ti,x-max = /bits/ 16 <3830>;
ti,y-min = /bits/ 16 <190>;
ti,y-max = /bits/ 16 <3830>;
ti,vref-delay-usecs = /bits/ 16 <450>;
ti,x-plate-ohms = /bits/ 16 <450>;
ti,y-plate-ohms = /bits/ 16 <250>;
ti,pressure-max = /bits/ 16 <15000>;
ti,debounce-rep = /bits/ 16 <0>;
ti,debounce-tol = /bits/ 16 <65535>;
ti,debounce-max = /bits/ 16 <1>;
linux,wakeup;
};
};
dbgu: serial@fffff200 {
status = "okay";
};
watchdog@fffffd40 {
status = "okay";
};
};
};
leds {
compatible = "gpio-leds";
ds8 {
label = "ds8";
gpios = <&pioA 13 GPIO_ACTIVE_LOW>;
linux,default-trigger = "none";
};
ds7 {
label = "ds7";
gpios = <&pioA 14 GPIO_ACTIVE_LOW>;
linux,default-trigger = "nand-disk";
};
ds1 {
label = "ds1";
gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
};
};
gpio_keys {
compatible = "gpio-keys";
button_0 {
label = "button_0";
gpios = <&pioA 27 GPIO_ACTIVE_LOW>;
linux,code = <256>;
gpio-key,wakeup;
};
button_1 {
label = "button_1";
gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
linux,code = <257>;
gpio-key,wakeup;
};
button_2 {
label = "button_2";
gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
linux,code = <258>;
gpio-key,wakeup;
};
button_3 {
label = "button_3";
gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
linux,code = <259>;
gpio-key,wakeup;
};
};
};
arch/arm/boot/dts/at91sam9rl.dtsi 0 → 100644
View file @ dfc25e45
This diff is collapsed.
arch/arm/boot/dts/at91sam9rlek.dts 0 → 100644
View file @ dfc25e45
/*
* at91sam9rlek.dts - Device Tree file for Atmel at91sam9rl reference board
*
* Copyright (C) 2014 Alexandre Belloni <alexandre.belloni@free-electrons.com>
*
* Licensed under GPLv2 only
*/
/dts-v1/;
#include "at91sam9rl.dtsi"
/ {
model = "Atmel at91sam9rlek";
compatible = "atmel,at91sam9rlek", "atmel,at91sam9rl", "atmel,at91sam9";
chosen {
bootargs = "console=ttyS0,115200 rootfstype=ubifs root=ubi0:rootfs ubi.mtd=5 rw";
};
memory {
reg = <0x20000000 0x4000000>;
};
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
main_clock: clock {
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <12000000>;
};
};
ahb {
nand0: nand@40000000 {
nand-bus-width = <8>;
nand-ecc-mode = "soft";
nand-on-flash-bbt = <1>;
status = "okay";
at91bootstrap@0 {
label = "at91bootstrap";
reg = <0x0 0x40000>;
};
bootloader@40000 {
label = "bootloader";
reg = <0x40000 0x80000>;
};
bootloaderenv@c0000 {
label = "bootloader env";
reg = <0xc0000 0xc0000>;
};
dtb@180000 {
label = "device tree";
reg = <0x180000 0x80000>;
};
kernel@200000 {
label = "kernel";
reg = <0x200000 0x600000>;
};
rootfs@800000 {
label = "rootfs";
reg = <0x800000 0x0f800000>;
};
};
apb {
mmc0: mmc@fffa4000 {
pinctrl-0 = <
&pinctrl_board_mmc0
&pinctrl_mmc0_clk
&pinctrl_mmc0_slot0_cmd_dat0
&pinctrl_mmc0_slot0_dat1_3>;
status = "okay";
slot@0 {
reg = <0>;
bus-width = <4>;
cd-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
};
};
usart0: serial@fffb0000 {
pinctrl-0 = <
&pinctrl_usart0
&pinctrl_usart0_rts
&pinctrl_usart0_cts>;
status = "okay";
};
dbgu: serial@fffff200 {
status = "okay";
};
pinctrl@fffff400 {
mmc0 {
pinctrl_board_mmc0: mmc0-board {
atmel,pins =
<AT91_PIOA 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
};
};
};
pmc: pmc@fffffc00 {
main: mainck {
clock-frequency = <12000000>;
};
};
watchdog@fffffd40 {
status = "okay";
};
};
};
leds {
compatible = "gpio-leds";
ds1 {
label = "ds1";
gpios = <&pioD 15 GPIO_ACTIVE_LOW>;
};
ds2 {
label = "ds2";
gpios = <&pioD 16 GPIO_ACTIVE_LOW>;
};
ds3 {
label = "ds3";
gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
gpio_keys {
compatible = "gpio-keys";
right_click {
label = "right_click";
gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
linux,code = <273>;
gpio-key,wakeup;
};
left_click {
label = "left_click";
gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
linux,code = <272>;
gpio-key,wakeup;
};
};
};
arch/arm/boot/dts/atlas6.dtsi
View file @ dfc25e45
......@@ -65,9 +65,10 @@ clks: clock-controller@88000000 {
#clock-cells = <1>;
};
reset-controller@88010000 {
rstc: reset-controller@88010000 {
compatible = "sirf,prima2-rstc";
reg = <0x88010000 0x1000>;
#reset-cells = <1>;
};
rsc-controller@88020000 {
......
arch/arm/boot/dts/marco.dtsi
View file @ dfc25e45
......@@ -58,9 +58,10 @@ rstc-iobg {
#size-cells = <1>;
ranges = <0xc2000000 0xc2000000 0x1000000>;
reset-controller@c2000000 {
rstc: reset-controller@c2000000 {
compatible = "sirf,marco-rstc";
reg = <0xc2000000 0x10000>;
#reset-cells = <1>;
};
};
......
arch/arm/boot/dts/prima2.dtsi
View file @ dfc25e45
......@@ -76,9 +76,10 @@ clks: clock-controller@88000000 {
#clock-cells = <1>;
};
reset-controller@88010000 {
rstc: reset-controller@88010000 {
compatible = "sirf,prima2-rstc";
reg = <0x88010000 0x1000>;
#reset-cells = <1>;
};
rsc-controller@88020000 {
......
arch/arm/boot/dts/qcom-msm8660-surf.dts
View file @ dfc25e45
/dts-v1/;
/include/ "skeleton.dtsi"
#include <dt-bindings/clock/qcom,gcc-msm8660.h>
#include "qcom-msm8660.dtsi"
/ {
model = "Qualcomm MSM8660 SURF";
compatible = "qcom,msm8660-surf", "qcom,msm8660";
interrupt-parent = <&intc>;
intc: interrupt-controller@2080000 {
compatible = "qcom,msm-8660-qgic";
interrupt-controller;
#interrupt-cells = <3>;
reg = < 0x02080000 0x1000 >,
< 0x02081000 0x1000 >;
};
timer@2000000 {
compatible = "qcom,scss-timer", "qcom,msm-timer";
interrupts = <1 0 0x301>,
<1 1 0x301>,
<1 2 0x301>;
reg = <0x02000000 0x100>;
clock-frequency = <27000000>,
<32768>;
cpu-offset = <0x40000>;
};
msmgpio: gpio@800000 {
compatible = "qcom,msm-gpio";
reg = <0x00800000 0x4000>;
gpio-controller;
#gpio-cells = <2>;
ngpio = <173>;
interrupts = <0 16 0x4>;
interrupt-controller;
#interrupt-cells = <2>;
};
gcc: clock-controller@900000 {
compatible = "qcom,gcc-msm8660";
#clock-cells = <1>;
#reset-cells = <1>;
reg = <0x900000 0x4000>;
};
serial@19c40000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x19c40000 0x1000>,
<0x19c00000 0x1000>;
interrupts = <0 195 0x0>;
clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
clock-names = "core", "iface";
};
qcom,ssbi@500000 {
compatible = "qcom,ssbi";
reg = <0x500000 0x1000>;
qcom,controller-type = "pmic-arbiter";
};
};
arch/arm/boot/dts/qcom-msm8660.dtsi 0 → 100644
View file @ dfc25e45
/dts-v1/;
/include/ "skeleton.dtsi"
#include <dt-bindings/clock/qcom,gcc-msm8660.h>
/ {
model = "Qualcomm MSM8660";
compatible = "qcom,msm8660";
interrupt-parent = <&intc>;
intc: interrupt-controller@2080000 {
compatible = "qcom,msm-8660-qgic";
interrupt-controller;
#interrupt-cells = <3>;
reg = < 0x02080000 0x1000 >,
< 0x02081000 0x1000 >;
};
timer@2000000 {
compatible = "qcom,scss-timer", "qcom,msm-timer";
interrupts = <1 0 0x301>,
<1 1 0x301>,
<1 2 0x301>;
reg = <0x02000000 0x100>;
clock-frequency = <27000000>,
<32768>;
cpu-offset = <0x40000>;
};
msmgpio: gpio@800000 {
compatible = "qcom,msm-gpio";
reg = <0x00800000 0x4000>;
gpio-controller;
#gpio-cells = <2>;
ngpio = <173>;
interrupts = <0 16 0x4>;
interrupt-controller;
#interrupt-cells = <2>;
};
gcc: clock-controller@900000 {
compatible = "qcom,gcc-msm8660";
#clock-cells = <1>;
#reset-cells = <1>;
reg = <0x900000 0x4000>;
};
serial@19c40000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x19c40000 0x1000>,
<0x19c00000 0x1000>;
interrupts = <0 195 0x0>;
clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
clock-names = "core", "iface";
};
qcom,ssbi@500000 {
compatible = "qcom,ssbi";
reg = <0x500000 0x1000>;
qcom,controller-type = "pmic-arbiter";
};
};
arch/arm/boot/dts/qcom-msm8960-cdp.dts
View file @ dfc25e45
/dts-v1/;
/include/ "skeleton.dtsi"
#include <dt-bindings/clock/qcom,gcc-msm8960.h>
#include "qcom-msm8960.dtsi"
/ {
model = "Qualcomm MSM8960 CDP";
compatible = "qcom,msm8960-cdp", "qcom,msm8960";
interrupt-parent = <&intc>;
intc: interrupt-controller@2000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
#interrupt-cells = <3>;
reg = < 0x02000000 0x1000 >,
< 0x02002000 0x1000 >;
};
timer@200a000 {
compatible = "qcom,kpss-timer", "qcom,msm-timer";
interrupts = <1 1 0x301>,
<1 2 0x301>,
<1 3 0x301>;
reg = <0x0200a000 0x100>;
clock-frequency = <27000000>,
<32768>;
cpu-offset = <0x80000>;
};
msmgpio: gpio@800000 {
compatible = "qcom,msm-gpio";
gpio-controller;
#gpio-cells = <2>;
ngpio = <150>;
interrupts = <0 16 0x4>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x800000 0x4000>;
};
gcc: clock-controller@900000 {
compatible = "qcom,gcc-msm8960";
#clock-cells = <1>;
#reset-cells = <1>;
reg = <0x900000 0x4000>;
};
clock-controller@4000000 {
compatible = "qcom,mmcc-msm8960";
reg = <0x4000000 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
};
serial@16440000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x16440000 0x1000>,
<0x16400000 0x1000>;
interrupts = <0 154 0x0>;
clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
clock-names = "core", "iface";
};
qcom,ssbi@500000 {
compatible = "qcom,ssbi";
reg = <0x500000 0x1000>;
qcom,controller-type = "pmic-arbiter";
};
};
arch/arm/boot/dts/qcom-msm8960.dtsi 0 → 100644
View file @ dfc25e45
/dts-v1/;
/include/ "skeleton.dtsi"
#include <dt-bindings/clock/qcom,gcc-msm8960.h>
/ {
model = "Qualcomm MSM8960";
compatible = "qcom,msm8960";
interrupt-parent = <&intc>;
intc: interrupt-controller@2000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
#interrupt-cells = <3>;
reg = < 0x02000000 0x1000 >,
< 0x02002000 0x1000 >;
};
timer@200a000 {
compatible = "qcom,kpss-timer", "qcom,msm-timer";
interrupts = <1 1 0x301>,
<1 2 0x301>,
<1 3 0x301>;
reg = <0x0200a000 0x100>;
clock-frequency = <27000000>,
<32768>;
cpu-offset = <0x80000>;
};
msmgpio: gpio@800000 {
compatible = "qcom,msm-gpio";
gpio-controller;
#gpio-cells = <2>;
ngpio = <150>;
interrupts = <0 16 0x4>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x800000 0x4000>;
};
gcc: clock-controller@900000 {
compatible = "qcom,gcc-msm8960";
#clock-cells = <1>;
#reset-cells = <1>;
reg = <0x900000 0x4000>;
};
clock-controller@4000000 {
compatible = "qcom,mmcc-msm8960";
reg = <0x4000000 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
};
serial@16440000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x16440000 0x1000>,
<0x16400000 0x1000>;
interrupts = <0 154 0x0>;
clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
clock-names = "core", "iface";
};
qcom,ssbi@500000 {
compatible = "qcom,ssbi";
reg = <0x500000 0x1000>;
qcom,controller-type = "pmic-arbiter";
};
};
arch/arm/configs/at91_dt_defconfig
View file @ dfc25e45
......@@ -16,10 +16,12 @@ CONFIG_MODULE_UNLOAD=y
CONFIG_ARCH_AT91=y
CONFIG_SOC_AT91RM9200=y
CONFIG_SOC_AT91SAM9260=y
CONFIG_SOC_AT91SAM9261=y
CONFIG_SOC_AT91SAM9263=y
CONFIG_SOC_AT91SAM9G45=y
CONFIG_SOC_AT91SAM9X5=y
CONFIG_SOC_AT91SAM9N12=y
CONFIG_SOC_AT91SAM9RL=y
CONFIG_MACH_AT91RM9200_DT=y
CONFIG_MACH_AT91SAM9_DT=y
CONFIG_AT91_TIMER_HZ=128
......@@ -119,6 +121,7 @@ CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
# CONFIG_SERIO is not set
CONFIG_LEGACY_PTY_COUNT=4
CONFIG_SERIAL_ATMEL=y
......
arch/arm/configs/at91sam9260_9g20_defconfig
View file @ dfc25e45
......@@ -3,6 +3,7 @@
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_EMBEDDED=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
......@@ -30,15 +31,12 @@ CONFIG_MACH_AT91SAM9_DT=y
CONFIG_AT91_SLOW_CLOCK=y
# CONFIG_ARM_THUMB is not set
CONFIG_AEABI=y
CONFIG_LEDS=y
CONFIG_LEDS_CPU=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
CONFIG_AUTO_ZRELADDR=y
CONFIG_FPE_NWFPE=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
......@@ -57,15 +55,14 @@ CONFIG_DEVTMPFS_MOUNT=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ATMEL=y
CONFIG_MTD_UBI=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_MISC_DEVICES=y
CONFIG_EEPROM_AT25=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
......@@ -112,8 +109,6 @@ CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_VERBOSE_PROCFS is not set
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y
......
arch/arm/configs/at91sam9rl_defconfig
View file @ dfc25e45
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EMBEDDED=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
......@@ -14,20 +14,23 @@ CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91SAM9RL=y
CONFIG_MACH_AT91SAM9RLEK=y
# CONFIG_ARM_THUMB is not set
CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,17105363 root=/dev/ram0 rw"
CONFIG_FPE_NWFPE=y
CONFIG_AUTO_ZRELADDR=y
CONFIG_NET=y
CONFIG_UNIX=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ATMEL=y
CONFIG_MTD_UBI=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=4
......@@ -66,6 +69,7 @@ CONFIG_EXT2_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_UBIFS_FS=y
CONFIG_CRAMFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_850=y
......
arch/arm/configs/bcm2835_defconfig
View file @ dfc25e45
......@@ -31,6 +31,7 @@ CONFIG_OPROFILE=y
CONFIG_JUMP_LABEL=y
CONFIG_ARCH_MULTI_V6=y
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_BCM=y
CONFIG_ARCH_BCM2835=y
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_AEABI=y
......
arch/arm/configs/clps711x_defconfig
View file @ dfc25e45
......@@ -15,7 +15,6 @@ CONFIG_ARCH_CDB89712=y
CONFIG_ARCH_CLEP7312=y
CONFIG_ARCH_EDB7211=y
CONFIG_ARCH_P720T=y
CONFIG_ARCH_FORTUNET=y
CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
......@@ -27,7 +26,6 @@ CONFIG_INET=y
# CONFIG_IPV6 is not set
CONFIG_IRDA=y
CONFIG_IRTTY_SIR=y
CONFIG_EP7211_DONGLE=y
# CONFIG_WIRELESS is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
......@@ -58,6 +56,7 @@ CONFIG_CS89x0_PLATFORM=y
# CONFIG_INPUT is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
CONFIG_SERIAL_CLPS711X=y
CONFIG_SERIAL_CLPS711X_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
......
arch/arm/include/asm/timex.h
View file @ dfc25e45
......@@ -12,12 +12,6 @@
#ifndef _ASMARM_TIMEX_H
#define _ASMARM_TIMEX_H
#ifdef CONFIG_ARCH_MULTIPLATFORM
#define CLOCK_TICK_RATE 1000000
#else
#include <mach/timex.h>
#endif
typedef unsigned long cycles_t;
#define get_cycles() ({ cycles_t c; read_current_timer(&c) ? 0 : c; })
......
arch/arm/include/debug/samsung.S
View file @ dfc25e45
......@@ -9,7 +9,7 @@
* published by the Free Software Foundation.
*/
#include <plat/regs-serial.h>
#include <linux/serial_s3c.h>
/* The S5PV210/S5PC110 implementations are as belows. */
......
arch/arm/mach-at91/Kconfig
View file @ dfc25e45
......@@ -131,7 +131,6 @@ config SOC_AT91SAM9261
select HAVE_AT91_DBGU0
select HAVE_FB_ATMEL
select SOC_AT91SAM9
select AT91_USE_OLD_CLK
select HAVE_AT91_USB_CLK
help
Select this if you are using one of Atmel's AT91SAM9261 or AT91SAM9G10 SoC.
......@@ -149,7 +148,6 @@ config SOC_AT91SAM9RL
select HAVE_AT91_DBGU0
select HAVE_FB_ATMEL
select SOC_AT91SAM9
select AT91_USE_OLD_CLK
select HAVE_AT91_UTMI
config SOC_AT91SAM9G45
......
arch/arm/mach-at91/at91rm9200.c
View file @ dfc25e45
......@@ -21,6 +21,7 @@
#include <mach/at91rm9200.h>
#include <mach/at91_st.h>
#include <mach/cpu.h>
#include <mach/hardware.h>
#include "at91_aic.h"
#include "soc.h"
......
arch/arm/mach-at91/at91rm9200_devices.c
View file @ dfc25e45
......@@ -21,6 +21,7 @@
#include <mach/at91rm9200.h>
#include <mach/at91rm9200_mc.h>
#include <mach/at91_ramc.h>
#include <mach/hardware.h>
#include "board.h"
#include "generic.h"
......@@ -922,6 +923,7 @@ static struct resource dbgu_resources[] = {
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
.rts_gpio = -EINVAL,
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
......@@ -960,6 +962,7 @@ static struct resource uart0_resources[] = {
static struct atmel_uart_data uart0_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
.rts_gpio = -EINVAL,
};
static u64 uart0_dmamask = DMA_BIT_MASK(32);
......@@ -987,9 +990,10 @@ static inline void configure_usart0_pins(unsigned pins)
if (pins & ATMEL_UART_RTS) {
/*
* AT91RM9200 Errata #39 - RTS0 is not internally connected to PA21.
* We need to drive the pin manually. Default is off (RTS is active low).
* We need to drive the pin manually. The serial driver will driver
* this to high when initializing.
*/
at91_set_gpio_output(AT91_PIN_PA21, 1);
uart0_data.rts_gpio = AT91_PIN_PA21;
}
}
......@@ -1009,6 +1013,7 @@ static struct resource uart1_resources[] = {
static struct atmel_uart_data uart1_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
.rts_gpio = -EINVAL,
};
static u64 uart1_dmamask = DMA_BIT_MASK(32);
......@@ -1060,6 +1065,7 @@ static struct resource uart2_resources[] = {
static struct atmel_uart_data uart2_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
.rts_gpio = -EINVAL,
};
static u64 uart2_dmamask = DMA_BIT_MASK(32);
......@@ -1103,6 +1109,7 @@ static struct resource uart3_resources[] = {
static struct atmel_uart_data uart3_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
.rts_gpio = -EINVAL,
};
static u64 uart3_dmamask = DMA_BIT_MASK(32);
......
arch/arm/mach-at91/at91rm9200_time.c
View file @ dfc25e45
......@@ -31,6 +31,7 @@
#include <asm/mach/time.h>
#include <mach/at91_st.h>
#include <mach/hardware.h>
static unsigned long last_crtr;
static u32 irqmask;
......
arch/arm/mach-at91/at91sam9260.c
View file @ dfc25e45
......@@ -21,6 +21,7 @@
#include <mach/cpu.h>
#include <mach/at91_dbgu.h>
#include <mach/at91sam9260.h>
#include <mach/hardware.h>
#include "at91_aic.h"
#include "at91_rstc.h"
......
arch/arm/mach-at91/at91sam9260_devices.c
View file @ dfc25e45
......@@ -25,6 +25,7 @@
#include <mach/at91_matrix.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_adc.h>
#include <mach/hardware.h>
#include "board.h"
#include "generic.h"
......@@ -819,6 +820,7 @@ static struct resource dbgu_resources[] = {
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
.rts_gpio = -EINVAL,
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
......@@ -857,6 +859,7 @@ static struct resource uart0_resources[] = {
static struct atmel_uart_data uart0_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
.rts_gpio = -EINVAL,
};
static u64 uart0_dmamask = DMA_BIT_MASK(32);
......@@ -908,6 +911,7 @@ static struct resource uart1_resources[] = {
static struct atmel_uart_data uart1_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
.rts_gpio = -EINVAL,
};
static u64 uart1_dmamask = DMA_BIT_MASK(32);
......@@ -951,6 +955,7 @@ static struct resource uart2_resources[] = {
static struct atmel_uart_data uart2_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
.rts_gpio = -EINVAL,
};
static u64 uart2_dmamask = DMA_BIT_MASK(32);
......@@ -994,6 +999,7 @@ static struct resource uart3_resources[] = {
static struct atmel_uart_data uart3_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
.rts_gpio = -EINVAL,
};
static u64 uart3_dmamask = DMA_BIT_MASK(32);
......@@ -1037,6 +1043,7 @@ static struct resource uart4_resources[] = {
static struct atmel_uart_data uart4_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
.rts_gpio = -EINVAL,
};
static u64 uart4_dmamask = DMA_BIT_MASK(32);
......@@ -1075,6 +1082,7 @@ static struct resource uart5_resources[] = {
static struct atmel_uart_data uart5_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
.rts_gpio = -EINVAL,
};
static u64 uart5_dmamask = DMA_BIT_MASK(32);
......
arch/arm/mach-at91/at91sam9261.c
View file @ dfc25e45
......@@ -20,15 +20,18 @@
#include <asm/system_misc.h>
#include <mach/cpu.h>
#include <mach/at91sam9261.h>
#include <mach/hardware.h>
#include "at91_aic.h"
#include "at91_rstc.h"
#include "soc.h"
#include "generic.h"
#include "clock.h"
#include "sam9_smc.h"
#include "pm.h"
#if defined(CONFIG_OLD_CLK_AT91)
#include "clock.h"
/* --------------------------------------------------------------------
* Clocks
* -------------------------------------------------------------------- */
......@@ -189,6 +192,23 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_ID("pioA", &pioA_clk),
CLKDEV_CON_ID("pioB", &pioB_clk),
CLKDEV_CON_ID("pioC", &pioC_clk),
/* more lookup table for DT entries */
CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk),
CLKDEV_CON_DEV_ID("usart", "ffffb400.serial", &usart1_clk),
CLKDEV_CON_DEV_ID("usart", "fff94000.serial", &usart2_clk),
CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk),
CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk),
CLKDEV_CON_DEV_ID("t2_clk", "fffa0000.timer", &tc2_clk),
CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &hck0),
CLKDEV_CON_DEV_ID("hclk", "600000.fb", &hck1),
CLKDEV_CON_DEV_ID("spi_clk", "fffc8000.spi", &spi0_clk),
CLKDEV_CON_DEV_ID("spi_clk", "fffcc000.spi", &spi1_clk),
CLKDEV_CON_DEV_ID("mci_clk", "fffa8000.mmc", &mmc_clk),
CLKDEV_CON_DEV_ID(NULL, "fffac000.i2c", &twi_clk),
CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk),
CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk),
CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
......@@ -247,7 +267,9 @@ static void __init at91sam9261_register_clocks(void)
clk_register(&hck0);
clk_register(&hck1);
}
#else
#define at91sam9261_register_clocks NULL
#endif
/* --------------------------------------------------------------------
* GPIO
* -------------------------------------------------------------------- */
......
arch/arm/mach-at91/at91sam9261_devices.c
View file @ dfc25e45
......@@ -25,6 +25,7 @@
#include <mach/at91sam9261_matrix.h>
#include <mach/at91_matrix.h>
#include <mach/at91sam9_smc.h>
#include <mach/hardware.h>
#include "board.h"
#include "generic.h"
......@@ -880,6 +881,7 @@ static struct resource dbgu_resources[] = {
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
.rts_gpio = -EINVAL,
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
......@@ -918,6 +920,7 @@ static struct resource uart0_resources[] = {
static struct atmel_uart_data uart0_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
.rts_gpio = -EINVAL,
};
static u64 uart0_dmamask = DMA_BIT_MASK(32);
......@@ -961,6 +964,7 @@ static struct resource uart1_resources[] = {
static struct atmel_uart_data uart1_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
.rts_gpio = -EINVAL,
};
static u64 uart1_dmamask = DMA_BIT_MASK(32);
......@@ -1004,6 +1008,7 @@ static struct resource uart2_resources[] = {
static struct atmel_uart_data uart2_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
.rts_gpio = -EINVAL,
};
static u64 uart2_dmamask = DMA_BIT_MASK(32);
......
arch/arm/mach-at91/at91sam9263.c
View file @ dfc25e45
......@@ -19,6 +19,7 @@
#include <asm/mach/map.h>
#include <asm/system_misc.h>
#include <mach/at91sam9263.h>
#include <mach/hardware.h>
#include "at91_aic.h"
#include "at91_rstc.h"
......@@ -223,6 +224,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioCDE_clk),
CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioCDE_clk),
CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioCDE_clk),
CLKDEV_CON_DEV_ID(NULL, "fffb8000.pwm", &pwm_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
......
arch/arm/mach-at91/at91sam9263_devices.c
View file @ dfc25e45
......@@ -24,6 +24,7 @@
#include <mach/at91sam9263_matrix.h>
#include <mach/at91_matrix.h>
#include <mach/at91sam9_smc.h>
#include <mach/hardware.h>
#include "board.h"
#include "generic.h"
......@@ -1324,6 +1325,7 @@ static struct resource dbgu_resources[] = {
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
.rts_gpio = -EINVAL,
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
......@@ -1362,6 +1364,7 @@ static struct resource uart0_resources[] = {
static struct atmel_uart_data uart0_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
.rts_gpio = -EINVAL,
};
static u64 uart0_dmamask = DMA_BIT_MASK(32);
......@@ -1405,6 +1408,7 @@ static struct resource uart1_resources[] = {
static struct atmel_uart_data uart1_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
.rts_gpio = -EINVAL,
};
static u64 uart1_dmamask = DMA_BIT_MASK(32);
......@@ -1448,6 +1452,7 @@ static struct resource uart2_resources[] = {
static struct atmel_uart_data uart2_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
.rts_gpio = -EINVAL,
};
static u64 uart2_dmamask = DMA_BIT_MASK(32);
......
arch/arm/mach-at91/at91sam926x_time.c
View file @ dfc25e45
......@@ -19,6 +19,7 @@
#include <linux/of_irq.h>
#include <asm/mach/time.h>
#include <mach/hardware.h>
#define AT91_PIT_MR 0x00 /* Mode Register */
#define AT91_PIT_PITIEN (1 << 25) /* Timer Interrupt Enable */
......
arch/arm/mach-at91/at91sam9g45.c
View file @ dfc25e45
......@@ -20,6 +20,7 @@
#include <asm/system_misc.h>
#include <mach/at91sam9g45.h>
#include <mach/cpu.h>
#include <mach/hardware.h>
#include "at91_aic.h"
#include "soc.h"
......@@ -284,6 +285,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_ID("pioE", &pioDE_clk),
/* Fake adc clock */
CLKDEV_CON_ID("adc_clk", &tsc_clk),
CLKDEV_CON_DEV_ID(NULL, "fffb8000.pwm", &pwm_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
......
arch/arm/mach-at91/at91sam9g45_devices.c
View file @ dfc25e45
......@@ -32,6 +32,7 @@
#include <mach/at91sam9_smc.h>
#include <linux/platform_data/dma-atmel.h>
#include <mach/atmel-mci.h>
#include <mach/hardware.h>
#include <media/atmel-isi.h>
......@@ -1587,6 +1588,7 @@ static struct resource dbgu_resources[] = {
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0,
.rts_gpio = -EINVAL,
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
......@@ -1625,6 +1627,7 @@ static struct resource uart0_resources[] = {
static struct atmel_uart_data uart0_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
.rts_gpio = -EINVAL,
};
static u64 uart0_dmamask = DMA_BIT_MASK(32);
......@@ -1668,6 +1671,7 @@ static struct resource uart1_resources[] = {
static struct atmel_uart_data uart1_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
.rts_gpio = -EINVAL,
};
static u64 uart1_dmamask = DMA_BIT_MASK(32);
......@@ -1711,6 +1715,7 @@ static struct resource uart2_resources[] = {
static struct atmel_uart_data uart2_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
.rts_gpio = -EINVAL,
};
static u64 uart2_dmamask = DMA_BIT_MASK(32);
......@@ -1754,6 +1759,7 @@ static struct resource uart3_resources[] = {
static struct atmel_uart_data uart3_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
.rts_gpio = -EINVAL,
};
static u64 uart3_dmamask = DMA_BIT_MASK(32);
......
arch/arm/mach-at91/at91sam9n12.c
View file @ dfc25e45
......@@ -182,6 +182,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
/* additional fake clock for macb_hclk */
CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &uhp_clk),
CLKDEV_CON_DEV_ID("ohci_clk", "500000.ohci", &uhp_clk),
CLKDEV_CON_DEV_ID(NULL, "f8034000.pwm", &pwm_clk),
};
/*
......
arch/arm/mach-at91/at91sam9rl.c
View file @ dfc25e45
......@@ -20,18 +20,20 @@
#include <mach/cpu.h>
#include <mach/at91_dbgu.h>
#include <mach/at91sam9rl.h>
#include <mach/hardware.h>
#include "at91_aic.h"
#include "at91_rstc.h"
#include "soc.h"
#include "generic.h"
#include "clock.h"
#include "sam9_smc.h"
#include "pm.h"
/* --------------------------------------------------------------------
* Clocks
* -------------------------------------------------------------------- */
#if defined(CONFIG_OLD_CLK_AT91)
#include "clock.h"
/*
* The peripheral clocks.
......@@ -196,6 +198,24 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_ID("pioB", &pioB_clk),
CLKDEV_CON_ID("pioC", &pioC_clk),
CLKDEV_CON_ID("pioD", &pioD_clk),
/* more lookup table for DT entries */
CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk),
CLKDEV_CON_DEV_ID("usart", "ffffb400.serial", &usart1_clk),
CLKDEV_CON_DEV_ID("usart", "ffffb800.serial", &usart2_clk),
CLKDEV_CON_DEV_ID("usart", "ffffbc00.serial", &usart3_clk),
CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk),
CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk),
CLKDEV_CON_DEV_ID("t2_clk", "fffa0000.timer", &tc2_clk),
CLKDEV_CON_DEV_ID("mci_clk", "fffa4000.mmc", &mmc_clk),
CLKDEV_CON_DEV_ID(NULL, "fffa8000.i2c", &twi0_clk),
CLKDEV_CON_DEV_ID(NULL, "fffac000.i2c", &twi1_clk),
CLKDEV_CON_DEV_ID(NULL, "fffc8000.pwm", &pwm_clk),
CLKDEV_CON_DEV_ID(NULL, "ffffc800.pwm", &pwm_clk),
CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk),
CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk),
CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk),
CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioD_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
......@@ -238,6 +258,7 @@ static void __init at91sam9rl_register_clocks(void)
clk_register(&pck0);
clk_register(&pck1);
}
#endif
/* --------------------------------------------------------------------
* GPIO
......@@ -350,6 +371,8 @@ AT91_SOC_START(at91sam9rl)
.default_irq_priority = at91sam9rl_default_irq_priority,
.extern_irq = (1 << AT91SAM9RL_ID_IRQ0),
.ioremap_registers = at91sam9rl_ioremap_registers,
#if defined(CONFIG_OLD_CLK_AT91)
.register_clocks = at91sam9rl_register_clocks,
#endif
.init = at91sam9rl_initialize,
AT91_SOC_END
arch/arm/mach-at91/at91sam9rl_devices.c
View file @ dfc25e45
......@@ -21,6 +21,7 @@
#include <mach/at91sam9rl_matrix.h>
#include <mach/at91_matrix.h>
#include <mach/at91sam9_smc.h>
#include <mach/hardware.h>
#include <linux/platform_data/dma-atmel.h>
#include "board.h"
......@@ -956,6 +957,7 @@ static struct resource dbgu_resources[] = {
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
.rts_gpio = -EINVAL,
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
......@@ -994,6 +996,7 @@ static struct resource uart0_resources[] = {
static struct atmel_uart_data uart0_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
.rts_gpio = -EINVAL,
};
static u64 uart0_dmamask = DMA_BIT_MASK(32);
......@@ -1045,6 +1048,7 @@ static struct resource uart1_resources[] = {
static struct atmel_uart_data uart1_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
.rts_gpio = -EINVAL,
};
static u64 uart1_dmamask = DMA_BIT_MASK(32);
......@@ -1088,6 +1092,7 @@ static struct resource uart2_resources[] = {
static struct atmel_uart_data uart2_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
.rts_gpio = -EINVAL,
};
static u64 uart2_dmamask = DMA_BIT_MASK(32);
......@@ -1131,6 +1136,7 @@ static struct resource uart3_resources[] = {
static struct atmel_uart_data uart3_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
.rts_gpio = -EINVAL,
};
static u64 uart3_dmamask = DMA_BIT_MASK(32);
......
arch/arm/mach-at91/at91sam9x5.c
View file @ dfc25e45
......@@ -253,6 +253,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("ehci_clk", "700000.ehci", &uhphs_clk),
CLKDEV_CON_DEV_ID("hclk", "500000.gadget", &utmi_clk),
CLKDEV_CON_DEV_ID("pclk", "500000.gadget", &udphs_clk),
CLKDEV_CON_DEV_ID(NULL, "f8034000.pwm", &pwm_clk),
};
/*
......
arch/arm/mach-at91/at91x40.c
View file @ dfc25e45
......@@ -19,7 +19,7 @@
#include <asm/mach/arch.h>
#include <mach/at91x40.h>
#include <mach/at91_st.h>
#include <mach/timex.h>
#include <mach/hardware.h>
#include "at91_aic.h"
#include "generic.h"
......
arch/arm/mach-at91/at91x40_time.c
View file @ dfc25e45
......@@ -25,6 +25,7 @@
#include <linux/time.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/at91x40.h>
#include <asm/mach/time.h>
#include "at91_tc.h"
......
arch/arm/mach-at91/board-dt-sam9.c
View file @ dfc25e45
......@@ -13,6 +13,7 @@
#include <linux/gpio.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/clk-provider.h>
#include <asm/setup.h>
#include <asm/irq.h>
......@@ -25,6 +26,14 @@
#include "generic.h"
static void __init sam9_dt_timer_init(void)
{
#if defined(CONFIG_COMMON_CLK)
of_clk_init(NULL);
#endif
at91sam926x_pit_init();
}
static const struct of_device_id irq_of_match[] __initconst = {
{ .compatible = "atmel,at91rm9200-aic", .data = at91_aic_of_init },
......@@ -43,7 +52,7 @@ static const char *at91_dt_board_compat[] __initdata = {
DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM (Device Tree)")
/* Maintainer: Atmel */
.init_time = at91sam926x_pit_init,
.init_time = sam9_dt_timer_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = at91_dt_initialize,
......
arch/arm/mach-at91/board-gsia18s.c
View file @ dfc25e45
......@@ -31,6 +31,7 @@
#include <asm/mach/arch.h>
#include <mach/at91sam9_smc.h>
#include <mach/hardware.h>
#include "at91_aic.h"
#include "board.h"
......
arch/arm/mach-at91/board-pcontrol-g20.c
View file @ dfc25e45
......@@ -30,6 +30,7 @@
#include <asm/mach/arch.h>
#include <mach/at91sam9_smc.h>
#include <mach/hardware.h>
#include "at91_aic.h"
#include "board.h"
......
arch/arm/mach-at91/board-stamp9g20.c
View file @ dfc25e45
......@@ -26,6 +26,7 @@
#include <asm/mach/arch.h>
#include <mach/at91sam9_smc.h>
#include <mach/hardware.h>
#include "at91_aic.h"
#include "board.h"
......
arch/arm/mach-at91/include/mach/at91x40.h
View file @ dfc25e45
......@@ -55,4 +55,6 @@
#define AT91_PS_CR (AT91_PS + 0) /* PS Control register */
#define AT91_PS_CR_CPU (1 << 0) /* CPU clock disable bit */
#define AT91X40_MASTER_CLOCK 40000000
#endif /* AT91X40_H */
arch/arm/mach-at91/include/mach/timex.h deleted 100644 → 0
View file @ 9f800363
/*
* arch/arm/mach-at91/include/mach/timex.h
*
* Copyright (C) 2003 SAN People
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_TIMEX_H
#define __ASM_ARCH_TIMEX_H
#include <mach/hardware.h>
#ifdef CONFIG_ARCH_AT91X40
#define AT91X40_MASTER_CLOCK 40000000
#define CLOCK_TICK_RATE (AT91X40_MASTER_CLOCK)
#else
#define CLOCK_TICK_RATE 12345678
#endif
#endif /* __ASM_ARCH_TIMEX_H */
arch/arm/mach-at91/pm.c
View file @ dfc25e45
......@@ -27,6 +27,7 @@
#include <asm/mach/irq.h>
#include <mach/cpu.h>
#include <mach/hardware.h>
#include "at91_aic.h"
#include "generic.h"
......
arch/arm/mach-bcm/Kconfig
View file @ dfc25e45
......@@ -16,12 +16,7 @@ config ARCH_BCM_MOBILE
select ARM_ERRATA_754322
select ARM_ERRATA_764369 if SMP
select ARM_GIC
select CPU_V7
select CLKSRC_OF
select GENERIC_CLOCKEVENTS
select GENERIC_TIME
select GPIO_BCM_KONA
select SPARSE_IRQ
select TICK_ONESHOT
select CACHE_L2X0
select HAVE_ARM_ARCH_TIMER
......@@ -32,6 +27,22 @@ config ARCH_BCM_MOBILE
BCM11130, BCM11140, BCM11351, BCM28145 and
BCM28155 variants.
config ARCH_BCM2835
bool "Broadcom BCM2835 family" if ARCH_MULTI_V6
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select ARM_ERRATA_411920
select ARM_TIMER_SP804
select CLKDEV_LOOKUP
select CLKSRC_OF
select CPU_V6
select GENERIC_CLOCKEVENTS
select PINCTRL
select PINCTRL_BCM2835
help
This enables support for the Broadcom BCM2835 SoC. This SoC is
used in the Raspberry Pi and Roku 2 devices.
endmenu
endif
arch/arm/mach-bcm/Makefile
View file @ dfc25e45
......@@ -11,5 +11,7 @@
# GNU General Public License for more details.
obj-$(CONFIG_ARCH_BCM_MOBILE) := board_bcm281xx.o bcm_kona_smc.o bcm_kona_smc_asm.o kona.o
obj-$(CONFIG_ARCH_BCM2835) += board_bcm2835.o
plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_bcm_kona_smc_asm.o :=-Wa,-march=armv7-a$(plus_sec)
arch/arm/mach-bcm/board_bcm281xx.c
View file @ dfc25e45
/*
* Copyright (C) 2012-2013 Broadcom Corporation
* Copyright (C) 2012-2014 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
......@@ -11,64 +11,65 @@
* GNU General Public License for more details.
*/
#include <linux/of_platform.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/clocksource.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/hardware/cache-l2x0.h>
#include "bcm_kona_smc.h"
#include "kona.h"
static int __init kona_l2_cache_init(void)
#define SECWDOG_OFFSET 0x00000000
#define SECWDOG_RESERVED_MASK 0xe2000000
#define SECWDOG_WD_LOAD_FLAG_MASK 0x10000000
#define SECWDOG_EN_MASK 0x08000000
#define SECWDOG_SRSTEN_MASK 0x04000000
#define SECWDOG_CLKS_SHIFT 20
#define SECWDOG_COUNT_SHIFT 0
static void bcm281xx_restart(enum reboot_mode mode, const char *cmd)
{
if (!IS_ENABLED(CONFIG_CACHE_L2X0))
return 0;
uint32_t val;
void __iomem *base;
struct device_node *np_wdog;
if (bcm_kona_smc_init() < 0) {
pr_info("Kona secure API not available. Skipping L2 init\n");
return 0;
np_wdog = of_find_compatible_node(NULL, NULL, "brcm,kona-wdt");
if (!np_wdog) {
pr_emerg("Couldn't find brcm,kona-wdt\n");
return;
}
base = of_iomap(np_wdog, 0);
if (!base) {
pr_emerg("Couldn't map brcm,kona-wdt\n");
return;
}
bcm_kona_smc(SSAPI_ENABLE_L2_CACHE, 0, 0, 0, 0);
/*
* The aux_val and aux_mask have no effect since L2 cache is already
* enabled. Pass 0s for aux_val and 1s for aux_mask for default value.
*/
return l2x0_of_init(0, ~0);
}
static void bcm_board_setup_restart(void)
{
struct device_node *np;
/* Enable watchdog with short timeout (244us). */
val = readl(base + SECWDOG_OFFSET);
val &= SECWDOG_RESERVED_MASK | SECWDOG_WD_LOAD_FLAG_MASK;
val |= SECWDOG_EN_MASK | SECWDOG_SRSTEN_MASK |
(0x15 << SECWDOG_CLKS_SHIFT) |
(0x8 << SECWDOG_COUNT_SHIFT);
writel(val, base + SECWDOG_OFFSET);
np = of_find_compatible_node(NULL, NULL, "brcm,bcm11351");
if (np) {
if (of_device_is_available(np))
bcm_kona_setup_restart();
of_node_put(np);
}
/* Restart setup for other boards goes here */
/* Wait for reset */
while (1);
}
static void __init board_init(void)
static void __init bcm281xx_init(void)
{
of_platform_populate(NULL, of_default_bus_match_table, NULL,
&platform_bus);
bcm_board_setup_restart();
kona_l2_cache_init();
}
static const char * const bcm11351_dt_compat[] = { "brcm,bcm11351", NULL, };
static const char * const bcm281xx_dt_compat[] = {
"brcm,bcm11351", /* Have to use the first number upstreamed */
NULL,
};
DT_MACHINE_START(BCM11351_DT, "BCM281xx Broadcom Application Processor")
.init_machine = board_init,
.restart = bcm_kona_restart,
.dt_compat = bcm11351_dt_compat,
DT_MACHINE_START(BCM281XX_DT, "BCM281xx Broadcom Application Processor")
.init_machine = bcm281xx_init,
.restart = bcm281xx_restart,
.dt_compat = bcm281xx_dt_compat,
MACHINE_END
arch/arm/mach-bcm/kona.c
View file @ dfc25e45
/*
* Copyright (C) 2013 Broadcom Corporation
* Copyright (C) 2012-2014 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
......@@ -11,55 +11,33 @@
* GNU General Public License for more details.
*/
#include <linux/of_address.h>
#include <asm/io.h>
#include <linux/of_platform.h>
#include <asm/hardware/cache-l2x0.h>
#include "bcm_kona_smc.h"
#include "kona.h"
static void __iomem *watchdog_base;
void bcm_kona_setup_restart(void)
void __init kona_l2_cache_init(void)
{
struct device_node *np_wdog;
int ret;
/*
* The assumption is that whoever calls bcm_kona_setup_restart()
* also needs a Kona Watchdog Timer entry in Device Tree, i.e. we
* report an error if the DT entry is missing.
*/
np_wdog = of_find_compatible_node(NULL, NULL, "brcm,kona-wdt");
if (!np_wdog) {
pr_err("brcm,kona-wdt not found in DT, reboot disabled\n");
if (!IS_ENABLED(CONFIG_CACHE_L2X0))
return;
}
watchdog_base = of_iomap(np_wdog, 0);
WARN(!watchdog_base, "failed to map watchdog base");
of_node_put(np_wdog);
}
#define SECWDOG_OFFSET 0x00000000
#define SECWDOG_RESERVED_MASK 0xE2000000
#define SECWDOG_WD_LOAD_FLAG_MASK 0x10000000
#define SECWDOG_EN_MASK 0x08000000
#define SECWDOG_SRSTEN_MASK 0x04000000
#define SECWDOG_CLKS_SHIFT 20
#define SECWDOG_LOCK_SHIFT 0
void bcm_kona_restart(enum reboot_mode mode, const char *cmd)
{
uint32_t val;
if (!watchdog_base)
panic("Watchdog not mapped. Reboot failed.\n");
ret = bcm_kona_smc_init();
if (ret) {
pr_info("Secure API not available (%d). Skipping L2 init.\n",
ret);
return;
}
/* Enable watchdog2 with very short timeout. */
val = readl(watchdog_base + SECWDOG_OFFSET);
val &= SECWDOG_RESERVED_MASK | SECWDOG_WD_LOAD_FLAG_MASK;
val |= SECWDOG_EN_MASK | SECWDOG_SRSTEN_MASK |
(0x8 << SECWDOG_CLKS_SHIFT) |
(0x8 << SECWDOG_LOCK_SHIFT);
writel(val, watchdog_base + SECWDOG_OFFSET);
bcm_kona_smc(SSAPI_ENABLE_L2_CACHE, 0, 0, 0, 0);
while (1)
;
/*
* The aux_val and aux_mask have no effect since L2 cache is already
* enabled. Pass 0s for aux_val and 1s for aux_mask for default value.
*/
ret = l2x0_of_init(0, ~0);
if (ret)
pr_err("Couldn't enable L2 cache: %d\n", ret);
}
arch/arm/mach-bcm/kona.h
View file @ dfc25e45
/*
* Copyright (C) 2013 Broadcom Corporation
* Copyright (C) 2012-2014 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
......@@ -11,7 +11,4 @@
* GNU General Public License for more details.
*/
#include <linux/reboot.h>
void bcm_kona_setup_restart(void);
void bcm_kona_restart(enum reboot_mode mode, const char *cmd);
void __init kona_l2_cache_init(void);
arch/arm/mach-bcm2835/Kconfig deleted 100644 → 0
View file @ 9f800363
config ARCH_BCM2835
bool "Broadcom BCM2835 family" if ARCH_MULTI_V6
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select ARM_ERRATA_411920
select ARM_TIMER_SP804
select CLKDEV_LOOKUP
select CLKSRC_OF
select CPU_V6
select GENERIC_CLOCKEVENTS
select PINCTRL
select PINCTRL_BCM2835
help
This enables support for the Broadcom BCM2835 SoC. This SoC is
used in the Raspberry Pi and Roku 2 devices.
arch/arm/mach-berlin/Kconfig
View file @ dfc25e45
config ARCH_BERLIN
bool "Marvell Berlin SoCs" if ARCH_MULTI_V7
select ARM_GIC
select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
select COMMON_CLK
select DW_APB_ICTL
select DW_APB_TIMER_OF
......@@ -16,12 +14,10 @@ config MACH_BERLIN_BG2
select CACHE_L2X0
select CPU_PJ4B
select HAVE_ARM_TWD if SMP
select HAVE_SMP
config MACH_BERLIN_BG2CD
bool "Marvell Armada 1500-mini (BG2CD)"
select CACHE_L2X0
select CPU_V7
select HAVE_ARM_TWD if SMP
endmenu
......
arch/arm/mach-clps711x/Kconfig
View file @ dfc25e45
......@@ -33,20 +33,6 @@ config ARCH_P720T
Say Y here if you intend to run this kernel on the ARM Prospector
720T.
config EP72XX_ROM_BOOT
bool "EP721x/EP731x ROM boot"
help
If you say Y here, your CLPS711x-based kernel will use the bootstrap
mode memory map instead of the normal memory map.
Processors derived from the Cirrus CLPS711X core support two boot
modes. Normal mode boots from the external memory device at CS0.
Bootstrap mode rearranges parts of the memory map, placing an
internal 128 byte bootstrap ROM at CS0. This option performs the
address map changes required to support booting in this mode.
You almost surely want to say N here.
endmenu
endif
arch/arm/mach-clps711x/include/mach/hardware.h
View file @ dfc25e45
......@@ -38,13 +38,6 @@
#define clps_writel(val,off) writel(val, CLPS711X_VIRT_BASE + (off))
#endif
/*
* The physical addresses that the external chip select signals map to is
* dependent on the setting of the nMEDCHG signal on EP7211 and EP7212
* processors. CONFIG_EP72XX_BOOT_ROM is only available if these
* processors are in use.
*/
#ifndef CONFIG_EP72XX_ROM_BOOT
#define CS0_PHYS_BASE (0x00000000)
#define CS1_PHYS_BASE (0x10000000)
#define CS2_PHYS_BASE (0x20000000)
......@@ -53,16 +46,6 @@
#define CS5_PHYS_BASE (0x50000000)
#define CS6_PHYS_BASE (0x60000000)
#define CS7_PHYS_BASE (0x70000000)
#else
#define CS0_PHYS_BASE (0x70000000)
#define CS1_PHYS_BASE (0x60000000)
#define CS2_PHYS_BASE (0x50000000)
#define CS3_PHYS_BASE (0x40000000)
#define CS4_PHYS_BASE (0x30000000)
#define CS5_PHYS_BASE (0x20000000)
#define CS6_PHYS_BASE (0x10000000)
#define CS7_PHYS_BASE (0x00000000)
#endif
#define CLPS711X_SRAM_BASE CS6_PHYS_BASE
#define CLPS711X_SRAM_SIZE (48 * 1024)
......
arch/arm/mach-clps711x/include/mach/timex.h deleted 100644 → 0
View file @ 9f800363
/* Bogus value */
#define CLOCK_TICK_RATE 512000
arch/arm/mach-cns3xxx/Kconfig
View file @ dfc25e45
config ARCH_CNS3XXX
bool "Cavium Networks CNS3XXX family" if ARCH_MULTI_V6
select ARM_GIC
select CPU_V6K
select GENERIC_CLOCKEVENTS
select MIGHT_HAVE_CACHE_L2X0
select MIGHT_HAVE_PCI
select PCI_DOMAINS if PCI
help
......
arch/arm/mach-davinci/include/mach/timex.h deleted 100644 → 0
View file @ 9f800363
/*
* DaVinci timer defines
*
* Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
*
* 2007 (c) MontaVista Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#ifndef __ASM_ARCH_TIMEX_H
#define __ASM_ARCH_TIMEX_H
/*
* Alert: Not all timers of the DaVinci family run at a frequency of 27MHz,
* but we should be fine as long as CLOCK_TICK_RATE or LATCH (see include/
* linux/jiffies.h) are not used directly in code. Currently none of the
* code relevant to DaVinci platform depends on these values directly.
*/
#define CLOCK_TICK_RATE 27000000
#endif /* __ASM_ARCH_TIMEX_H__ */
arch/arm/mach-dove/include/mach/timex.h deleted 100644 → 0
View file @ 9f800363
/*
* arch/arm/mach-dove/include/mach/timex.h
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#define CLOCK_TICK_RATE (100 * HZ)
arch/arm/mach-ebsa110/include/mach/timex.h deleted 100644 → 0
View file @ 9f800363
/*
* arch/arm/mach-ebsa110/include/mach/timex.h
*
* Copyright (C) 1997, 1998 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* EBSA110 architecture timex specifications
*/
/*
* On the EBSA, the clock ticks at weird rates.
* This is therefore not used to calculate the
* divisor.
*/
#define CLOCK_TICK_RATE 47894000
arch/arm/mach-efm32/include/mach/entry-macro.S deleted 100644 → 0
View file @ 9f800363
/*
* Empty file waiting for deletion once <mach/entry-macro.S> isn't needed any
* more. Patch "ARM: v7-M: drop using mach/entry-macro.S" sitting in next.
*/
arch/arm/mach-efm32/include/mach/timex.h deleted 100644 → 0
View file @ 9f800363
/*
* Empty file waiting for deletion once <mach/timex.h> isn't needed any more.
*/
arch/arm/mach-ep93xx/core.c
View file @ dfc25e45
......@@ -117,7 +117,7 @@ void __init ep93xx_map_io(void)
#define EP93XX_TIMER4_CLOCK 983040
#define TIMER1_RELOAD ((EP93XX_TIMER123_CLOCK / HZ) - 1)
#define TIMER4_TICKS_PER_JIFFY DIV_ROUND_CLOSEST(CLOCK_TICK_RATE, HZ)
#define TIMER4_TICKS_PER_JIFFY DIV_ROUND_CLOSEST(EP93XX_TIMER4_CLOCK, HZ)
static unsigned int last_jiffy_time;
......
arch/arm/mach-ep93xx/include/mach/timex.h deleted 100644 → 0
View file @ 9f800363
/*
* arch/arm/mach-ep93xx/include/mach/timex.h
*/
#define CLOCK_TICK_RATE 983040
arch/arm/mach-exynos/common.c
View file @ dfc25e45
......@@ -20,6 +20,7 @@
#include <clocksource/samsung_pwm.h>
#include <linux/sched.h>
#include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/of.h>
#include <linux/of_fdt.h>
#include <linux/of_irq.h>
......@@ -40,7 +41,6 @@
#include <plat/cpu.h>
#include <plat/pm.h>
#include <plat/regs-serial.h>
#include "common.h"
#include "regs-pmu.h"
......
arch/arm/mach-exynos/include/mach/timex.h deleted 100644 → 0
View file @ 9f800363
/* linux/arch/arm/mach-exynos4/include/mach/timex.h
*
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Copyright (c) 2003-2010 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* Based on arch/arm/mach-s5p6442/include/mach/timex.h
*
* EXYNOS4 - time parameters
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_TIMEX_H
#define __ASM_ARCH_TIMEX_H __FILE__
/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
* a variable is useless. It seems as long as we make our timers an
* exact multiple of HZ, any value that makes a 1->1 correspondence
* for the time conversion functions to/from jiffies is acceptable.
*/
#define CLOCK_TICK_RATE 12000000
#endif /* __ASM_ARCH_TIMEX_H */
arch/arm/mach-exynos/include/mach/uncompress.h deleted 100644 → 0
View file @ 9f800363
/*
* Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* EXYNOS - uncompress code
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_UNCOMPRESS_H
#define __ASM_ARCH_UNCOMPRESS_H __FILE__
#include <asm/mach-types.h>
#include <mach/map.h>
#include <plat/uncompress.h>
static unsigned int __raw_readl(unsigned int ptr)
{
return *((volatile unsigned int *)ptr);
}
static void arch_detect_cpu(void)
{
u32 chip_id = __raw_readl(EXYNOS_PA_CHIPID);
/*
* product_id is bits 31:12
* bits 23:20 describe the exynosX family
* bits 27:24 describe the exynosX family in exynos5420
*/
chip_id >>= 20;
if ((chip_id & 0x0f) == 0x5 || (chip_id & 0xf0) == 0x50)
uart_base = (volatile u8 *)EXYNOS5_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);
else
uart_base = (volatile u8 *)EXYNOS4_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);
/*
* For preventing FIFO overrun or infinite loop of UART console,
* fifo_max should be the minimum fifo size of all of the UART channels
*/
fifo_mask = S5PV210_UFSTAT_TXMASK;
fifo_max = 15 << S5PV210_UFSTAT_TXSHIFT;
}
#endif /* __ASM_ARCH_UNCOMPRESS_H */
arch/arm/mach-exynos/pm_domains.c
View file @ dfc25e45
......@@ -22,8 +22,6 @@
#include <linux/of_platform.h>
#include <linux/sched.h>
#include <plat/devs.h>
#include "regs-pmu.h"
/*
......
arch/arm/mach-footbridge/include/mach/timex.h deleted 100644 → 0
View file @ 9f800363
/*
* arch/arm/mach-footbridge/include/mach/timex.h
*
* Copyright (C) 1998 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* EBSA285 architecture timex specifications
*/
/*
* We assume a constant here; this satisfies the maths in linux/timex.h
* and linux/time.h. CLOCK_TICK_RATE is actually system dependent, but
* this must be a constant.
*/
#define CLOCK_TICK_RATE (50000000/16)
arch/arm/mach-gemini/include/mach/timex.h deleted 100644 → 0
View file @ 9f800363
/*
* Gemini timex specifications
*
* Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
/* When AHB bus frequency is 150MHz */
#define CLOCK_TICK_RATE 38000000
arch/arm/mach-highbank/Kconfig
View file @ dfc25e45
......@@ -5,7 +5,6 @@ config ARCH_HIGHBANK
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_HAS_OPP
select ARCH_SUPPORTS_BIG_ENDIAN
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_AMBA
select ARM_ERRATA_764369 if SMP
select ARM_ERRATA_775420
......@@ -14,14 +13,8 @@ config ARCH_HIGHBANK
select ARM_PSCI
select ARM_TIMER_SP804
select CACHE_L2X0
select COMMON_CLK
select CPU_V7
select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU
select HAVE_ARM_TWD if SMP
select HAVE_SMP
select MAILBOX
select PL320_MBOX
select SPARSE_IRQ
select USE_OF
select ZONE_DMA if ARM_LPAE
arch/arm/mach-hisi/Kconfig
View file @ dfc25e45
......@@ -3,13 +3,9 @@ config ARCH_HI3xxx
select ARM_AMBA
select ARM_GIC
select ARM_TIMER_SP804
select ARCH_WANT_OPTIONAL_GPIOLIB
select CACHE_L2X0
select CLKSRC_OF
select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select HAVE_SMP
select PINCTRL
select PINCTRL_SINGLE
help
......
arch/arm/mach-imx/Kconfig
View file @ dfc25e45
......@@ -2,18 +2,11 @@ config ARCH_MXC
bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7
select ARCH_REQUIRE_GPIOLIB
select ARM_CPU_SUSPEND if PM
select ARM_PATCH_PHYS_VIRT
select CLKSRC_MMIO
select COMMON_CLK
select GENERIC_ALLOCATOR
select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
select MIGHT_HAVE_CACHE_L2X0 if ARCH_MULTI_V6_V7
select MULTI_IRQ_HANDLER
select PINCTRL
select SOC_BUS
select SPARSE_IRQ
select USE_OF
help
Support for Freescale MXC/iMX-based family of processors
......@@ -121,7 +114,6 @@ config SOC_IMX31
config SOC_IMX35
bool
select ARCH_MXC_IOMUX_V3
select CPU_V6K
select HAVE_EPIT
select MXC_AVIC
select SMP_ON_UP if SMP
......@@ -132,7 +124,6 @@ config SOC_IMX5
select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP
select ARCH_MXC_IOMUX_V3
select CPU_V7
select MXC_TZIC
config SOC_IMX51
......@@ -792,14 +783,12 @@ config SOC_IMX6Q
select ARM_ERRATA_764369 if SMP
select ARM_ERRATA_775420
select ARM_GIC
select CPU_V7
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select HAVE_IMX_ANATOP
select HAVE_IMX_GPC
select HAVE_IMX_MMDC
select HAVE_IMX_SRC
select HAVE_SMP
select MFD_SYSCON
select MIGHT_HAVE_PCI
select PCI_DOMAINS if PCI
......@@ -817,7 +806,6 @@ config SOC_IMX6SL
select ARM_ERRATA_754322
select ARM_ERRATA_775420
select ARM_GIC
select CPU_V7
select HAVE_IMX_ANATOP
select HAVE_IMX_GPC
select HAVE_IMX_MMDC
......@@ -833,9 +821,7 @@ config SOC_IMX6SL
config SOC_VF610
bool "Vybrid Family VF610 support"
select CPU_V7
select ARM_GIC
select CLKSRC_OF
select PINCTRL_VF610
select VF_PIT_TIMER
select PL310_ERRATA_588369 if CACHE_PL310
......
arch/arm/mach-integrator/include/mach/timex.h deleted 100644 → 0
View file @ 9f800363
/*
* arch/arm/mach-integrator/include/mach/timex.h
*
* Integrator architecture timex specifications
*
* Copyright (C) 1999 ARM Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* ??
*/
#define CLOCK_TICK_RATE (50000000 / 16)
arch/arm/mach-iop32x/include/mach/timex.h deleted 100644 → 0
View file @ 9f800363
/*
* arch/arm/mach-iop32x/include/mach/timex.h
*
* IOP32x architecture timex specifications
*/
#define CLOCK_TICK_RATE (100 * HZ)
arch/arm/mach-iop33x/include/mach/timex.h deleted 100644 → 0
View file @ 9f800363
/*
* arch/arm/mach-iop33x/include/mach/timex.h
*
* IOP3xx architecture timex specifications
*/
#define CLOCK_TICK_RATE (100 * HZ)
arch/arm/mach-ixp4xx/common.c
View file @ dfc25e45
......@@ -23,7 +23,6 @@
#include <linux/interrupt.h>
#include <linux/bitops.h>
#include <linux/time.h>
#include <linux/timex.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/io.h>
......@@ -44,6 +43,17 @@
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#define IXP4XX_TIMER_FREQ 66666000
/*
* The timer register doesn't allow to specify the two least significant bits of
* the timeout value and assumes them being zero. So make sure IXP4XX_LATCH is
* the best value with the two least significant bits unset.
*/
#define IXP4XX_LATCH DIV_ROUND_CLOSEST(IXP4XX_TIMER_FREQ, \
(IXP4XX_OST_RELOAD_MASK + 1) * HZ) * \
(IXP4XX_OST_RELOAD_MASK + 1)
static void __init ixp4xx_clocksource_init(void);
static void __init ixp4xx_clockevent_init(void);
static struct clock_event_device clockevent_ixp4xx;
......@@ -519,7 +529,7 @@ static void ixp4xx_set_mode(enum clock_event_mode mode,
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
osrt = LATCH & ~IXP4XX_OST_RELOAD_MASK;
osrt = IXP4XX_LATCH & ~IXP4XX_OST_RELOAD_MASK;
opts = IXP4XX_OST_ENABLE;
break;
case CLOCK_EVT_MODE_ONESHOT:
......
arch/arm/mach-ixp4xx/include/mach/timex.h deleted 100644 → 0
View file @ 9f800363
/*
* arch/arm/mach-ixp4xx/include/mach/timex.h
*
*/
#include <mach/ixp4xx-regs.h>
/*
* We use IXP425 General purpose timer for our timer needs, it runs at
* 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the
* timer register ignores the bottom 2 bits of the LATCH value.
*/
#define IXP4XX_TIMER_FREQ 66666000
#define CLOCK_TICK_RATE \
(((IXP4XX_TIMER_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
arch/arm/mach-keystone/Kconfig
View file @ dfc25e45
config ARCH_KEYSTONE
bool "Texas Instruments Keystone Devices"
depends on ARCH_MULTI_V7
select CPU_V7
select ARM_GIC
select HAVE_ARM_ARCH_TIMER
select HAVE_SMP
select CLKSRC_MMIO
select GENERIC_CLOCKEVENTS
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_ERRATA_798181 if SMP
select COMMON_CLK_KEYSTONE
select ARCH_SUPPORTS_BIG_ENDIAN
......
arch/arm/mach-kirkwood/include/mach/timex.h deleted 100644 → 0
View file @ 9f800363
/*
* arch/arm/mach-kirkwood/include/mach/timex.h
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#define CLOCK_TICK_RATE (100 * HZ)
arch/arm/mach-ks8695/include/mach/timex.h deleted 100644 → 0
View file @ 9f800363
/*
* arch/arm/mach-ks8695/include/mach/timex.h
*
* Copyright (C) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* KS8695 - Time Parameters
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_TIMEX_H
#define __ASM_ARCH_TIMEX_H
#include <mach/hardware.h>
#define CLOCK_TICK_RATE KS8695_CLOCK_RATE
#endif
arch/arm/mach-lpc32xx/include/mach/timex.h deleted 100644 → 0
View file @ 9f800363
/*
* arch/arm/mach-lpc32xx/include/mach/timex.h
*
* Author: Kevin Wells <kevin.wells@nxp.com>
*
* Copyright (C) 2010 NXP Semiconductors
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __ASM_ARCH_TIMEX_H
#define __ASM_ARCH_TIMEX_H
/*
* Rate in Hz of the main system oscillator. This value should match
* the value 'MAIN_OSC_FREQ' in platform.h
*/
#define CLOCK_TICK_RATE 13000000
#endif
arch/arm/mach-mmp/include/mach/timex.h deleted 100644 → 0
View file @ 9f800363
/*
* linux/arch/arm/mach-mmp/include/mach/timex.h
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifdef CONFIG_CPU_MMP2
#define CLOCK_TICK_RATE 6500000
#else
#define CLOCK_TICK_RATE 3250000
#endif
arch/arm/mach-mmp/time.c
View file @ dfc25e45
......@@ -39,6 +39,12 @@
#include "clock.h"
#ifdef CONFIG_CPU_MMP2
#define MMP_CLOCK_FREQ 6500000
#else
#define MMP_CLOCK_FREQ 3250000
#endif
#define TIMERS_VIRT_BASE TIMERS1_VIRT_BASE
#define MAX_DELTA (0xfffffffe)
......@@ -195,14 +201,14 @@ void __init timer_init(int irq)
{
timer_config();
sched_clock_register(mmp_read_sched_clock, 32, CLOCK_TICK_RATE);
sched_clock_register(mmp_read_sched_clock, 32, MMP_CLOCK_FREQ);
ckevt.cpumask = cpumask_of(0);
setup_irq(irq, &timer_irq);
clocksource_register_hz(&cksrc, CLOCK_TICK_RATE);
clockevents_config_and_register(&ckevt, CLOCK_TICK_RATE,
clocksource_register_hz(&cksrc, MMP_CLOCK_FREQ);
clockevents_config_and_register(&ckevt, MMP_CLOCK_FREQ,
MIN_DELTA, MAX_DELTA);
}
......
arch/arm/mach-moxart/Kconfig
View file @ dfc25e45
......@@ -2,14 +2,9 @@ config ARCH_MOXART
bool "MOXA ART SoC" if ARCH_MULTI_V4
select CPU_FA526
select ARM_DMA_MEM_BUFFERABLE
select USE_OF
select CLKSRC_OF
select CLKSRC_MMIO
select HAVE_CLK
select COMMON_CLK
select GENERIC_IRQ_CHIP
select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
select PHYLIB if NETDEVICES
help
Say Y here if you want to run your kernel on hardware with a
......
arch/arm/mach-msm/Kconfig
View file @ dfc25e45
config ARCH_MSM
bool
config ARCH_MSM_DT
bool "Qualcomm MSM DT Support" if ARCH_MULTI_V7
select ARCH_MSM
select ARCH_REQUIRE_GPIOLIB
select CLKSRC_OF
select GENERIC_CLOCKEVENTS
help
Support for Qualcomm's devicetree based MSM systems.
if ARCH_MSM
menu "Qualcomm MSM SoC Selection"
depends on ARCH_MSM_DT
config ARCH_MSM8X60
bool "Enable support for MSM8X60"
select ARM_GIC
select CPU_V7
select HAVE_SMP
select MSM_SCM if SMP
select MSM_TIMER
config ARCH_MSM8960
bool "Enable support for MSM8960"
select ARM_GIC
select CPU_V7
select HAVE_SMP
select MSM_SCM if SMP
select MSM_TIMER
config ARCH_MSM8974
bool "Enable support for MSM8974"
select ARM_GIC
select CPU_V7
select HAVE_ARM_ARCH_TIMER
select HAVE_SMP
select MSM_SCM if SMP
endmenu
choice
prompt "Qualcomm MSM SoC Type"
default ARCH_MSM7X00A
depends on ARCH_MSM_NODT
depends on ARCH_MSM
config ARCH_MSM7X00A
bool "MSM7x00A / MSM7x01A"
......@@ -54,7 +13,7 @@ config ARCH_MSM7X00A
select MACH_TROUT if !MACH_HALIBUT
select MSM_PROC_COMM
select MSM_SMD
select MSM_TIMER
select CLKSRC_QCOM
select MSM_SMD_PKG3
config ARCH_MSM7X30
......@@ -66,7 +25,7 @@ config ARCH_MSM7X30
select MSM_GPIOMUX
select MSM_PROC_COMM
select MSM_SMD
select MSM_TIMER
select CLKSRC_QCOM
select MSM_VIC
config ARCH_QSD8X50
......@@ -78,7 +37,7 @@ config ARCH_QSD8X50
select MSM_GPIOMUX
select MSM_PROC_COMM
select MSM_SMD
select MSM_TIMER
select CLKSRC_QCOM
select MSM_VIC
endchoice
......@@ -99,7 +58,7 @@ config MSM_VIC
bool
menu "Qualcomm MSM Board Type"
depends on ARCH_MSM_NODT
depends on ARCH_MSM
config MACH_HALIBUT
depends on ARCH_MSM
......@@ -153,7 +112,4 @@ config MSM_GPIOMUX
config MSM_SCM
bool
config MSM_TIMER
bool
endif
arch/arm/mach-msm/Makefile
View file @ dfc25e45
obj-$(CONFIG_MSM_TIMER) += timer.o
obj-$(CONFIG_MSM_PROC_COMM) += clock.o
obj-$(CONFIG_MSM_VIC) += irq-vic.o
......@@ -14,18 +13,11 @@ obj-$(CONFIG_ARCH_QSD8X50) += dma.o io.o
obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o
obj-$(CONFIG_MSM_SMD) += last_radio_log.o
obj-$(CONFIG_MSM_SCM) += scm.o scm-boot.o
CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_SMP) += headsmp.o platsmp.o
obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o devices-msm7x00.o
obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o board-trout-panel.o devices-msm7x00.o
obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o
obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o
obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o
obj-$(CONFIG_ARCH_MSM_DT) += board-dt.o
obj-$(CONFIG_MSM_GPIOMUX) += gpiomux.o
obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o
arch/arm/mach-msm/common.h
View file @ dfc25e45
......@@ -24,7 +24,6 @@ extern void __iomem *__msm_ioremap_caller(phys_addr_t phys_addr, size_t size,
unsigned int mtype, void *caller);
extern struct smp_operations msm_smp_ops;
extern void msm_cpu_die(unsigned int cpu);
struct msm_mmc_platform_data;
......
arch/arm/mach-msm/headsmp.S deleted 100644 → 0
View file @ 9f800363
/*
* linux/arch/arm/mach-realview/headsmp.S
*
* Copyright (c) 2003 ARM Limited
* All Rights Reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/linkage.h>
#include <linux/init.h>
/*
* MSM specific entry point for secondary CPUs. This provides
* a "holding pen" into which all secondary cores are held until we're
* ready for them to initialise.
*/
ENTRY(msm_secondary_startup)
mrc p15, 0, r0, c0, c0, 5
and r0, r0, #15
adr r4, 1f
ldmia r4, {r5, r6}
sub r4, r4, r5
add r6, r6, r4
pen: ldr r7, [r6]
cmp r7, r0
bne pen
/*
* we've been released from the holding pen: secondary_stack
* should now contain the SVC stack for this core
*/
b secondary_startup
ENDPROC(msm_secondary_startup)
.align
1: .long .
.long pen_release
arch/arm/mach-msm/hotplug.c deleted 100644 → 0
View file @ 9f800363
/*
* Copyright (C) 2002 ARM Ltd.
* All Rights Reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/smp.h>
#include <asm/smp_plat.h>
#include "common.h"
static inline void cpu_enter_lowpower(void)
{
}
static inline void cpu_leave_lowpower(void)
{
}
static inline void platform_do_lowpower(unsigned int cpu)
{
/* Just enter wfi for now. TODO: Properly shut off the cpu. */
for (;;) {
/*
* here's the WFI
*/
asm("wfi"
:
:
: "memory", "cc");
if (pen_release == cpu_logical_map(cpu)) {
/*
* OK, proper wakeup, we're done
*/
break;
}
/*
* getting here, means that we have come out of WFI without
* having been woken up - this shouldn't happen
*
* The trouble is, letting people know about this is not really
* possible, since we are currently running incoherently, and
* therefore cannot safely call printk() or anything else
*/
pr_debug("CPU%u: spurious wakeup call\n", cpu);
}
}
/*
* platform-specific code to shutdown a CPU
*
* Called with IRQs disabled
*/
void __ref msm_cpu_die(unsigned int cpu)
{
/*
* we're ready for shutdown now, so do it
*/
cpu_enter_lowpower();
platform_do_lowpower(cpu);
/*
* bring this CPU back into the world of cache
* coherency, and then restore interrupts
*/
cpu_leave_lowpower();
}
arch/arm/mach-msm/include/mach/timex.h deleted 100644 → 0
View file @ 9f800363
/* arch/arm/mach-msm/include/mach/timex.h
*
* Copyright (C) 2007 Google, Inc.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#ifndef __ASM_ARCH_MSM_TIMEX_H
#define __ASM_ARCH_MSM_TIMEX_H
#define CLOCK_TICK_RATE 1000000
#endif
arch/arm/mach-mv78xx0/include/mach/timex.h deleted 100644 → 0
View file @ 9f800363
/*
* arch/arm/mach-mv78xx0/include/mach/timex.h
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#define CLOCK_TICK_RATE (100 * HZ)
arch/arm/mach-mvebu/Kconfig
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-mvebu/Makefile
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-mvebu/armada-370-xp.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-mvebu/system-controller.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-mxs/Kconfig
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-netx/include/mach/timex.h deleted 100644 → 0
View file @ 9f800363
This diff is collapsed.
arch/arm/mach-netx/time.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-nomadik/Kconfig
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-nspire/Kconfig
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-omap1/include/mach/timex.h deleted 100644 → 0
View file @ 9f800363
This diff is collapsed.
arch/arm/mach-omap2/Kconfig
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-omap2/include/mach/timex.h deleted 100644 → 0
View file @ 9f800363
This diff is collapsed.
arch/arm/mach-orion5x/include/mach/timex.h deleted 100644 → 0
View file @ 9f800363
This diff is collapsed.
arch/arm/mach-picoxcell/Kconfig
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-prima2/Kconfig
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-prima2/common.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-prima2/common.h
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-prima2/l2x0.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-prima2/rstc.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-prima2/rtciobrg.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-pxa/include/mach/timex.h deleted 100644 → 0
View file @ 9f800363
This diff is collapsed.
arch/arm/mach-qcom/Kconfig 0 → 100644
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-qcom/Makefile 0 → 100644
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-realview/include/mach/timex.h deleted 100644 → 0
View file @ 9f800363
This diff is collapsed.
arch/arm/mach-rockchip/Kconfig
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-rpc/include/mach/timex.h deleted 100644 → 0
View file @ 9f800363
This diff is collapsed.
arch/arm/mach-rpc/time.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c24xx/Kconfig
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c24xx/clock-s3c2410.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c24xx/clock-s3c2412.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c24xx/clock-s3c2440.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c24xx/common.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c24xx/dma-s3c2410.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c24xx/dma-s3c2412.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c24xx/dma-s3c2440.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c24xx/dma-s3c2443.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c24xx/include/mach/tick.h deleted 100644 → 0
View file @ 9f800363
This diff is collapsed.
arch/arm/mach-s3c24xx/include/mach/timex.h deleted 100644 → 0
View file @ 9f800363
This diff is collapsed.
arch/arm/mach-s3c24xx/mach-amlm5900.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c24xx/mach-anubis.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c24xx/mach-at2440evb.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c24xx/mach-bast.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c24xx/mach-gta02.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c24xx/mach-h1940.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c24xx/mach-jive.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c24xx/mach-mini2440.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c24xx/mach-n30.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c24xx/mach-nexcoder.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c24xx/mach-osiris.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c24xx/mach-otom.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c24xx/mach-qt2410.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c24xx/mach-rx1950.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c24xx/mach-rx3715.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c24xx/mach-s3c2416-dt.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c24xx/mach-smdk2410.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c24xx/mach-smdk2413.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c24xx/mach-smdk2416.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c24xx/mach-smdk2440.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c24xx/mach-smdk2443.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c24xx/mach-tct_hammer.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c24xx/mach-vr1000.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c24xx/mach-vstms.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c24xx/pm.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c24xx/s3c2410.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c24xx/s3c2412.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c24xx/s3c2416.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c24xx/s3c2443.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c24xx/s3c244x.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c24xx/sleep-s3c2410.S
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c24xx/sleep.S
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c64xx/common.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c64xx/include/mach/tick.h deleted 100644 → 0
View file @ 9f800363
This diff is collapsed.
arch/arm/mach-s3c64xx/include/mach/timex.h deleted 100644 → 0
View file @ 9f800363
This diff is collapsed.
arch/arm/mach-s3c64xx/irq-pm.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c64xx/mach-anw6410.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c64xx/mach-crag6410.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c64xx/mach-hmt.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c64xx/mach-mini6410.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c64xx/mach-ncp.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c64xx/mach-real6410.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c64xx/mach-smartq.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c64xx/mach-smdk6400.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c64xx/mach-smdk6410.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c64xx/s3c6400.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s3c64xx/s3c6410.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s5p64x0/common.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s5p64x0/include/mach/timex.h deleted 100644 → 0
View file @ 9f800363
This diff is collapsed.
arch/arm/mach-s5p64x0/irq-pm.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s5p64x0/mach-smdk6440.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s5p64x0/mach-smdk6450.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s5pc100/common.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s5pc100/include/mach/tick.h deleted 100644 → 0
View file @ 9f800363
This diff is collapsed.
arch/arm/mach-s5pc100/include/mach/timex.h deleted 100644 → 0
View file @ 9f800363
This diff is collapsed.
arch/arm/mach-s5pc100/mach-smdkc100.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s5pv210/common.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s5pv210/include/mach/timex.h deleted 100644 → 0
View file @ 9f800363
This diff is collapsed.
arch/arm/mach-s5pv210/mach-aquila.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s5pv210/mach-goni.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s5pv210/mach-smdkc110.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s5pv210/mach-smdkv210.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-s5pv210/mach-torbreck.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-sa1100/include/mach/timex.h deleted 100644 → 0
View file @ 9f800363
This diff is collapsed.
arch/arm/mach-sa1100/time.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-shmobile/Kconfig
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-shmobile/clock-r8a7779.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-shmobile/include/mach/timex.h deleted 100644 → 0
View file @ 9f800363
This diff is collapsed.
arch/arm/mach-shmobile/setup-emev2.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-socfpga/Kconfig
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-spear/Kconfig
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-spear/include/mach/timex.h deleted 100644 → 0
View file @ 9f800363
This diff is collapsed.
arch/arm/mach-sti/Kconfig
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-sunxi/Kconfig
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-tegra/Kconfig
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-u300/Kconfig
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-ux500/Kconfig
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-versatile/include/mach/timex.h deleted 100644 → 0
View file @ 9f800363
This diff is collapsed.
arch/arm/mach-vexpress/Kconfig
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-virt/Kconfig deleted 100644 → 0
View file @ 9f800363
This diff is collapsed.
arch/arm/mach-virt/Makefile deleted 100644 → 0
View file @ 9f800363
This diff is collapsed.
arch/arm/mach-virt/virt.c deleted 100644 → 0
View file @ 9f800363
This diff is collapsed.
arch/arm/mach-vt8500/Kconfig
View file @ dfc25e45
This diff is collapsed.
arch/arm/mach-w90x900/include/mach/timex.h deleted 100644 → 0
View file @ 9f800363
This diff is collapsed.
arch/arm/mach-zynq/Kconfig
View file @ dfc25e45
This diff is collapsed.
arch/arm/plat-omap/include/plat/timex.h deleted 100644 → 0
View file @ 9f800363
This diff is collapsed.
arch/arm/plat-samsung/clock.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/plat-samsung/cpu.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/plat-samsung/devs.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/plat-samsung/include/plat/cpu.h
View file @ dfc25e45
This diff is collapsed.
arch/arm/plat-samsung/include/plat/regs-serial.h deleted 100644 → 0
View file @ 9f800363
This diff is collapsed.
arch/arm/plat-samsung/init.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/plat-samsung/pm-gpio.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/plat-samsung/pm.c
View file @ dfc25e45
This diff is collapsed.
arch/arm/plat-samsung/s5p-irq-pm.c
View file @ dfc25e45
This diff is collapsed.
drivers/clocksource/Kconfig
View file @ dfc25e45
This diff is collapsed.
drivers/clocksource/Makefile
View file @ dfc25e45
This diff is collapsed.
drivers/clocksource/exynos_mct.c
View file @ dfc25e45
This diff is collapsed.
drivers/clocksource/timer-marco.c
View file @ dfc25e45
This diff is collapsed.
drivers/clocksource/timer-prima2.c
View file @ dfc25e45
This diff is collapsed.
drivers/input/misc/ixp4xx-beeper.c
View file @ dfc25e45
This diff is collapsed.
drivers/irqchip/exynos-combiner.c
View file @ dfc25e45
This diff is collapsed.
drivers/irqchip/irq-mmp.c
View file @ dfc25e45
This diff is collapsed.
drivers/rtc/rtc-at91sam9.c
View file @ dfc25e45
This diff is collapsed.
drivers/rtc/rtc-pxa.c
View file @ dfc25e45
This diff is collapsed.
drivers/tty/serial/atmel_serial.c
View file @ dfc25e45
This diff is collapsed.
include/linux/platform_data/atmel.h
View file @ dfc25e45
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7