Commit e0e31afb authored by Bob Sharp's avatar Bob Sharp Committed by Roland Dreier

RDMA/nes: Enable MC/UC after changing MTU

Re-enable multicast and unicast after changing MTU.
Signed-off-by: default avatarBob Sharp <bsharp@neteffect.com>
Signed-off-by: default avatarSweta Bhatt <sweta.bhatt@einfochips.com>
Signed-off-by: default avatarChien Tung <ctung@neteffect.com>
Signed-off-by: default avatarRoland Dreier <rolandd@cisco.com>
parent 7a8d1407
...@@ -918,6 +918,10 @@ static int nes_netdev_change_mtu(struct net_device *netdev, int new_mtu) ...@@ -918,6 +918,10 @@ static int nes_netdev_change_mtu(struct net_device *netdev, int new_mtu)
struct nes_device *nesdev = nesvnic->nesdev; struct nes_device *nesdev = nesvnic->nesdev;
int ret = 0; int ret = 0;
u8 jumbomode = 0; u8 jumbomode = 0;
u32 nic_active;
u32 nic_active_bit;
u32 uc_all_active;
u32 mc_all_active;
if ((new_mtu < ETH_ZLEN) || (new_mtu > max_mtu)) if ((new_mtu < ETH_ZLEN) || (new_mtu > max_mtu))
return -EINVAL; return -EINVAL;
...@@ -931,8 +935,24 @@ static int nes_netdev_change_mtu(struct net_device *netdev, int new_mtu) ...@@ -931,8 +935,24 @@ static int nes_netdev_change_mtu(struct net_device *netdev, int new_mtu)
nes_nic_init_timer_defaults(nesdev, jumbomode); nes_nic_init_timer_defaults(nesdev, jumbomode);
if (netif_running(netdev)) { if (netif_running(netdev)) {
nic_active_bit = 1 << nesvnic->nic_index;
mc_all_active = nes_read_indexed(nesdev,
NES_IDX_NIC_MULTICAST_ALL) & nic_active_bit;
uc_all_active = nes_read_indexed(nesdev,
NES_IDX_NIC_UNICAST_ALL) & nic_active_bit;
nes_netdev_stop(netdev); nes_netdev_stop(netdev);
nes_netdev_open(netdev); nes_netdev_open(netdev);
nic_active = nes_read_indexed(nesdev,
NES_IDX_NIC_MULTICAST_ALL);
nic_active |= mc_all_active;
nes_write_indexed(nesdev, NES_IDX_NIC_MULTICAST_ALL,
nic_active);
nic_active = nes_read_indexed(nesdev, NES_IDX_NIC_UNICAST_ALL);
nic_active |= uc_all_active;
nes_write_indexed(nesdev, NES_IDX_NIC_UNICAST_ALL, nic_active);
} }
return ret; return ret;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment