arm64: dts: qcom: Drop undocumented "svid" property

The Linux typec_mux implementation required that a property named "svid"
was present in the remote node of the of_graph for a match to be found.

With the introduction of commit '4aebc4f8 ("usb: typec: mux: Clean up
mux_fwnode_match()")', the implementation is aligned with the binding
and this property can be dropped - and the associated DeviceTree
validation warning resolved.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230531024944.4105769-1-quic_bjorande@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

arch/arm64/boot/dts/qcom/sc8280xp-crd.dts

@@ -234,7 +234,6 @@ usb0-sbu-mux {
 
 		mode-switch;
 		orientation-switch;
-		svid = /bits/ 16 <0xff01>;
 
 		port {
 			usb0_sbu_mux: endpoint {
@@ -254,7 +253,6 @@ usb1-sbu-mux {
 
 		mode-switch;
 		orientation-switch;
-		svid = /bits/ 16 <0xff01>;
 
 		port {
 			usb1_sbu_mux: endpoint {

arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts

@@ -334,7 +334,6 @@ usb0-sbu-mux {
 
 		mode-switch;
 		orientation-switch;
-		svid = /bits/ 16 <0xff01>;
 
 		port {
 			usb0_sbu_mux: endpoint {
@@ -354,7 +353,6 @@ usb1-sbu-mux {
 
 		mode-switch;
 		orientation-switch;
-		svid = /bits/ 16 <0xff01>;
 
 		port {
 			usb1_sbu_mux: endpoint {

arch/arm64/boot/dts/qcom/sm8350-hdk.dts

@@ -348,7 +348,6 @@ typec-mux@42 {
 		vcc-supply = <&vreg_bob>;
 		mode-switch;
 		orientation-switch;
-		svid = /bits/ 16 <0xff01>;
 
 		ports {
 			#address-cells = <1>;

arch/arm64/boot/dts/qcom/sm8450-hdk.dts

@@ -517,7 +517,6 @@ typec-mux@42 {
 		vcc-supply = <&vreg_bob>;
 		mode-switch;
 		orientation-switch;
-		svid = /bits/ 16 <0xff01>;
 
 		ports {
 			#address-cells = <1>;