Commit e1547c53 authored by Jes Sorensen's avatar Jes Sorensen Committed by Kalle Valo

rtl8xxxu: First stab at adding IQK calibration for 8723bu parts

The 8723bu also has it's own IQK calibration process. This is similar
in flow, but still different enough to warrent it's own
implementation, at least for now.
Signed-off-by: default avatarJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: default avatarKalle Valo <kvalo@codeaurora.org>
parent c6594ffd
......@@ -3510,6 +3510,91 @@ static bool rtl8xxxu_simularity_compare(struct rtl8xxxu_priv *priv,
return false;
}
static bool rtl8723bu_simularity_compare(struct rtl8xxxu_priv *priv,
int result[][8], int c1, int c2)
{
u32 i, j, diff, simubitmap, bound = 0;
int candidate[2] = {-1, -1}; /* for path A and path B */
int tmp1, tmp2;
bool retval = true;
if (priv->tx_paths > 1)
bound = 8;
else
bound = 4;
simubitmap = 0;
for (i = 0; i < bound; i++) {
if (i & 1) {
if ((result[c1][i] & 0x00000200))
tmp1 = result[c1][i] | 0xfffffc00;
else
tmp1 = result[c1][i];
if ((result[c2][i]& 0x00000200))
tmp2 = result[c2][i] | 0xfffffc00;
else
tmp2 = result[c2][i];
} else {
tmp1 = result[c1][i];
tmp2 = result[c2][i];
}
diff = (tmp1 > tmp2) ? (tmp1 - tmp2) : (tmp2 - tmp1);
if (diff > MAX_TOLERANCE) {
if ((i == 2 || i == 6) && !simubitmap) {
if (result[c1][i] + result[c1][i + 1] == 0)
candidate[(i / 4)] = c2;
else if (result[c2][i] + result[c2][i + 1] == 0)
candidate[(i / 4)] = c1;
else
simubitmap = simubitmap | (1 << i);
} else {
simubitmap = simubitmap | (1 << i);
}
}
}
if (simubitmap == 0) {
for (i = 0; i < (bound / 4); i++) {
if (candidate[i] >= 0) {
for (j = i * 4; j < (i + 1) * 4 - 2; j++)
result[3][j] = result[candidate[i]][j];
retval = false;
}
}
return retval;
} else {
if (!(simubitmap & 0x03)) {
/* path A TX OK */
for (i = 0; i < 2; i++)
result[3][i] = result[c1][i];
}
if (!(simubitmap & 0x0c)) {
/* path A RX OK */
for (i = 2; i < 4; i++)
result[3][i] = result[c1][i];
}
if (!(simubitmap & 0x30) && priv->tx_paths > 1) {
/* path B RX OK */
for (i = 4; i < 6; i++)
result[3][i] = result[c1][i];
}
if (!(simubitmap & 0x30) && priv->tx_paths > 1) {
/* path B RX OK */
for (i = 6; i < 8; i++)
result[3][i] = result[c1][i];
}
}
return false;
}
static void
rtl8xxxu_save_mac_regs(struct rtl8xxxu_priv *priv, const u32 *reg, u32 *backup)
{
......@@ -3677,6 +3762,369 @@ static int rtl8xxxu_iqk_path_b(struct rtl8xxxu_priv *priv)
return result;
}
static int rtl8723bu_iqk_path_a(struct rtl8xxxu_priv *priv)
{
u32 reg_eac, reg_e94, reg_e9c, path_sel, val32;
int result = 0;
path_sel = rtl8xxxu_read32(priv, REG_S0S1_PATH_SWITCH);
/*
* Leave IQK mode
*/
val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
val32 &= 0x000000ff;
rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
/*
* Enable path A PA in TX IQK mode
*/
val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT);
val32 |= 0x80000;
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32);
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x20000);
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0003f);
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xc7f87);
/*
* Tx IQK setting
*/
rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00);
rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800);
/* path-A IQK setting */
rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x18008c1c);
rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c);
rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c);
rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c);
rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x821403ea);
rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28110000);
rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82110000);
rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x28110000);
/* LO calibration setting */
rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x00462911);
/*
* Enter IQK mode
*/
val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
val32 &= 0x000000ff;
val32 |= 0x80800000;
rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
/*
* The vendor driver indicates the USB module is always using
* S0S1 path 1 for the 8723bu. This may be different for 8192eu
*/
if (priv->rf_paths > 1)
rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000000);
else
rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000280);
/*
* Bit 12 seems to be BT_GRANT, and is only found in the 8723bu.
* No trace of this in the 8192eu or 8188eu vendor drivers.
*/
rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00000800);
/* One shot, path A LOK & IQK */
rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000);
rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
mdelay(1);
/* Restore Ant Path */
rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel);
#ifdef RTL8723BU_BT
/* GNT_BT = 1 */
rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00001800);
#endif
/*
* Leave IQK mode
*/
val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
val32 &= 0x000000ff;
rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
/* Check failed */
reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A);
reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A);
val32 = (reg_e9c >> 16) & 0x3ff;
if (val32 & 0x200)
val32 = 0x400 - val32;
if (!(reg_eac & BIT(28)) &&
((reg_e94 & 0x03ff0000) != 0x01420000) &&
((reg_e9c & 0x03ff0000) != 0x00420000) &&
((reg_e94 & 0x03ff0000) < 0x01100000) &&
((reg_e94 & 0x03ff0000) > 0x00f00000) &&
val32 < 0xf)
result |= 0x01;
else /* If TX not OK, ignore RX */
goto out;
out:
return result;
}
static int rtl8723bu_rx_iqk_path_a(struct rtl8xxxu_priv *priv)
{
u32 reg_ea4, reg_eac, reg_e94, reg_e9c, path_sel, val32;
int result = 0;
path_sel = rtl8xxxu_read32(priv, REG_S0S1_PATH_SWITCH);
/*
* Leave IQK mode
*/
val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
val32 &= 0x000000ff;
rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
/*
* Enable path A PA in TX IQK mode
*/
val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT);
val32 |= 0x80000;
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32);
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000);
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f);
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7fb7);
/*
* Tx IQK setting
*/
rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00);
rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800);
/* path-A IQK setting */
rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x18008c1c);
rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c);
rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c);
rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c);
rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82160ff0);
rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28110000);
rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82110000);
rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x28110000);
/* LO calibration setting */
rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a911);
/*
* Enter IQK mode
*/
val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
val32 &= 0x000000ff;
val32 |= 0x80800000;
rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
/*
* The vendor driver indicates the USB module is always using
* S0S1 path 1 for the 8723bu. This may be different for 8192eu
*/
if (priv->rf_paths > 1)
rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000000);
else
rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000280);
/*
* Bit 12 seems to be BT_GRANT, and is only found in the 8723bu.
* No trace of this in the 8192eu or 8188eu vendor drivers.
*/
rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00000800);
/* One shot, path A LOK & IQK */
rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000);
rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
mdelay(1);
/* Restore Ant Path */
rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel);
#ifdef RTL8723BU_BT
/* GNT_BT = 1 */
rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00001800);
#endif
/*
* Leave IQK mode
*/
val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
val32 &= 0x000000ff;
rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
/* Check failed */
reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A);
reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A);
val32 = (reg_e9c >> 16) & 0x3ff;
if (val32 & 0x200)
val32 = 0x400 - val32;
if (!(reg_eac & BIT(28)) &&
((reg_e94 & 0x03ff0000) != 0x01420000) &&
((reg_e9c & 0x03ff0000) != 0x00420000) &&
((reg_e94 & 0x03ff0000) < 0x01100000) &&
((reg_e94 & 0x03ff0000) > 0x00f00000) &&
val32 < 0xf)
result |= 0x01;
else /* If TX not OK, ignore RX */
goto out;
val32 = 0x80007c00 | (reg_e94 &0x3ff0000) |
((reg_e9c & 0x3ff0000) >> 16);
rtl8xxxu_write32(priv, REG_TX_IQK, val32);
/*
* Modify RX IQK mode
*/
val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
val32 &= 0x000000ff;
rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT);
val32 |= 0x80000;
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32);
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000);
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f);
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7d77);
/*
* PA, PAD setting
*/
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0xf80);
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_55, 0x4021f);
/*
* RX IQK setting
*/
rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800);
/* path-A IQK setting */
rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x38008c1c);
rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x18008c1c);
rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c);
rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c);
rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82110000);
rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x2816001f);
rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82110000);
rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x28110000);
/* LO calibration setting */
rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a8d1);
/*
* Enter IQK mode
*/
val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
val32 &= 0x000000ff;
val32 |= 0x80800000;
rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
if (priv->rf_paths > 1)
rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000000);
else
rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000280);
/*
* Disable BT
*/
rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00000800);
/* One shot, path A LOK & IQK */
rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000);
rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
mdelay(1);
/* Restore Ant Path */
rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel);
#ifdef RTL8723BU_BT
/* GNT_BT = 1 */
rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00001800);
#endif
/*
* Leave IQK mode
*/
val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
val32 &= 0x000000ff;
rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
/* Check failed */
reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
reg_ea4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_A_2);
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x780);
val32 = (reg_eac >> 16) & 0x3ff;
if (val32 & 0x200)
val32 = 0x400 - val32;
if (!(reg_eac & BIT(27)) &&
((reg_ea4 & 0x03ff0000) != 0x01320000) &&
((reg_eac & 0x03ff0000) != 0x00360000) &&
((reg_ea4 & 0x03ff0000) < 0x01100000) &&
((reg_ea4 & 0x03ff0000) > 0x00f00000) &&
val32 < 0xf)
result |= 0x02;
else /* If TX not OK, ignore RX */
goto out;
out:
return result;
}
#ifdef RTL8723BU_PATH_B
static int rtl8723bu_iqk_path_b(struct rtl8xxxu_priv *priv)
{
u32 reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc, path_sel;
int result = 0;
path_sel = rtl8xxxu_read32(priv, REG_S0S1_PATH_SWITCH);
val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
val32 &= 0x000000ff;
rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
/* One shot, path B LOK & IQK */
rtl8xxxu_write32(priv, REG_IQK_AGC_CONT, 0x00000002);
rtl8xxxu_write32(priv, REG_IQK_AGC_CONT, 0x00000000);
mdelay(1);
/* Check failed */
reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
reg_eb4 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B);
reg_ebc = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B);
reg_ec4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_B_2);
reg_ecc = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_B_2);
if (!(reg_eac & BIT(31)) &&
((reg_eb4 & 0x03ff0000) != 0x01420000) &&
((reg_ebc & 0x03ff0000) != 0x00420000))
result |= 0x01;
else
goto out;
if (!(reg_eac & BIT(30)) &&
(((reg_ec4 & 0x03ff0000) >> 16) != 0x132) &&
(((reg_ecc & 0x03ff0000) >> 16) != 0x36))
result |= 0x02;
else
dev_warn(&priv->udev->dev, "%s: Path B RX IQK failed!\n",
__func__);
out:
return result;
}
#endif
static void rtl8xxxu_phy_iqcalibrate(struct rtl8xxxu_priv *priv,
int result[][8], int t)
{
......@@ -3879,6 +4327,234 @@ static void rtl8xxxu_phy_iqcalibrate(struct rtl8xxxu_priv *priv,
}
}
static void rtl8723bu_phy_iqcalibrate(struct rtl8xxxu_priv *priv,
int result[][8], int t)
{
struct device *dev = &priv->udev->dev;
u32 i, val32;
int path_a_ok /*, path_b_ok */;
int retry = 2;
const u32 adda_regs[RTL8XXXU_ADDA_REGS] = {
REG_FPGA0_XCD_SWITCH_CTRL, REG_BLUETOOTH,
REG_RX_WAIT_CCA, REG_TX_CCK_RFON,
REG_TX_CCK_BBON, REG_TX_OFDM_RFON,
REG_TX_OFDM_BBON, REG_TX_TO_RX,
REG_TX_TO_TX, REG_RX_CCK,
REG_RX_OFDM, REG_RX_WAIT_RIFS,
REG_RX_TO_RX, REG_STANDBY,
REG_SLEEP, REG_PMPD_ANAEN
};
const u32 iqk_mac_regs[RTL8XXXU_MAC_REGS] = {
REG_TXPAUSE, REG_BEACON_CTRL,
REG_BEACON_CTRL_1, REG_GPIO_MUXCFG
};
const u32 iqk_bb_regs[RTL8XXXU_BB_REGS] = {
REG_OFDM0_TRX_PATH_ENABLE, REG_OFDM0_TR_MUX_PAR,
REG_FPGA0_XCD_RF_SW_CTRL, REG_CONFIG_ANT_A, REG_CONFIG_ANT_B,
REG_FPGA0_XAB_RF_SW_CTRL, REG_FPGA0_XA_RF_INT_OE,
REG_FPGA0_XB_RF_INT_OE, REG_FPGA0_RF_MODE
};
u8 xa_agc = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1) & 0xff;
u8 xb_agc = rtl8xxxu_read32(priv, REG_OFDM0_XB_AGC_CORE1) & 0xff;
/*
* Note: IQ calibration must be performed after loading
* PHY_REG.txt , and radio_a, radio_b.txt
*/
if (t == 0) {
/* Save ADDA parameters, turn Path A ADDA on */
rtl8xxxu_save_regs(priv, adda_regs, priv->adda_backup,
RTL8XXXU_ADDA_REGS);
rtl8xxxu_save_mac_regs(priv, iqk_mac_regs, priv->mac_backup);
rtl8xxxu_save_regs(priv, iqk_bb_regs,
priv->bb_backup, RTL8XXXU_BB_REGS);
}
rtl8xxxu_path_adda_on(priv, adda_regs, true);
/* MAC settings */
rtl8xxxu_mac_calibration(priv, iqk_mac_regs, priv->mac_backup);
val32 = rtl8xxxu_read32(priv, REG_CCK0_AFE_SETTING);
val32 |= 0x0f000000;
rtl8xxxu_write32(priv, REG_CCK0_AFE_SETTING, val32);
rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, 0x03a05600);
rtl8xxxu_write32(priv, REG_OFDM0_TR_MUX_PAR, 0x000800e4);
rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_SW_CTRL, 0x22204000);
#ifdef RTL8723BU_PATH_B
/* Set RF mode to standby Path B */
if (priv->tx_paths > 1)
rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_AC, 0x10000);
#endif
#if 0
/* Page B init */
rtl8xxxu_write32(priv, REG_CONFIG_ANT_A, 0x0f600000);
if (priv->tx_paths > 1)
rtl8xxxu_write32(priv, REG_CONFIG_ANT_B, 0x0f600000);
#endif
/*
* RX IQ calibration setting for 8723B D cut large current issue
* when leaving IPS
*/
val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
val32 &= 0x000000ff;
rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT);
val32 |= 0x80000;
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32);
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000);
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f);
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7fb7);
val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED);
val32 |= 0x20;
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED, val32);
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_43, 0x60fbd);
for (i = 0; i < retry; i++) {
path_a_ok = rtl8723bu_iqk_path_a(priv);
if (path_a_ok == 0x01) {
val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
val32 &= 0x000000ff;
rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
#if 0 /* Only needed in restore case, we may need this when going to suspend */
priv->RFCalibrateInfo.TxLOK[RF_A] =
rtl8xxxu_read_rfreg(priv, RF_A,
RF6052_REG_TXM_IDAC);
#endif
val32 = rtl8xxxu_read32(priv,
REG_TX_POWER_BEFORE_IQK_A);
result[t][0] = (val32 >> 16) & 0x3ff;
val32 = rtl8xxxu_read32(priv,
REG_TX_POWER_AFTER_IQK_A);
result[t][1] = (val32 >> 16) & 0x3ff;
break;
}
}
if (!path_a_ok)
dev_dbg(dev, "%s: Path A TX IQK failed!\n", __func__);
for (i = 0; i < retry; i++) {
path_a_ok = rtl8723bu_rx_iqk_path_a(priv);
if (path_a_ok == 0x03) {
val32 = rtl8xxxu_read32(priv,
REG_RX_POWER_BEFORE_IQK_A_2);
result[t][2] = (val32 >> 16) & 0x3ff;
val32 = rtl8xxxu_read32(priv,
REG_RX_POWER_AFTER_IQK_A_2);
result[t][3] = (val32 >> 16) & 0x3ff;
break;
}
}
if (!path_a_ok)
dev_dbg(dev, "%s: Path A RX IQK failed!\n", __func__);
if (priv->tx_paths > 1) {
#if 1
dev_warn(dev, "%s: Path B not supported\n", __func__);
#else
/*
* Path A into standby
*/
val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
val32 &= 0x000000ff;
rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC, 0x10000);
val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
val32 &= 0x000000ff;
val32 |= 0x80800000;
rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
/* Turn Path B ADDA on */
rtl8xxxu_path_adda_on(priv, adda_regs, false);
for (i = 0; i < retry; i++) {
path_b_ok = rtl8xxxu_iqk_path_b(priv);
if (path_b_ok == 0x03) {
val32 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B);
result[t][4] = (val32 >> 16) & 0x3ff;
val32 = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B);
result[t][5] = (val32 >> 16) & 0x3ff;
break;
}
}
if (!path_b_ok)
dev_dbg(dev, "%s: Path B IQK failed!\n", __func__);
for (i = 0; i < retry; i++) {
path_b_ok = rtl8723bu_rx_iqk_path_b(priv);
if (path_a_ok == 0x03) {
val32 = rtl8xxxu_read32(priv,
REG_RX_POWER_BEFORE_IQK_B_2);
result[t][6] = (val32 >> 16) & 0x3ff;
val32 = rtl8xxxu_read32(priv,
REG_RX_POWER_AFTER_IQK_B_2);
result[t][7] = (val32 >> 16) & 0x3ff;
break;
}
}
if (!path_b_ok)
dev_dbg(dev, "%s: Path B RX IQK failed!\n", __func__);
#endif
}
/* Back to BB mode, load original value */
val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
val32 &= 0x000000ff;
rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
if (t) {
/* Reload ADDA power saving parameters */
rtl8xxxu_restore_regs(priv, adda_regs, priv->adda_backup,
RTL8XXXU_ADDA_REGS);
/* Reload MAC parameters */
rtl8xxxu_restore_mac_regs(priv, iqk_mac_regs, priv->mac_backup);
/* Reload BB parameters */
rtl8xxxu_restore_regs(priv, iqk_bb_regs,
priv->bb_backup, RTL8XXXU_BB_REGS);
/* Restore RX initial gain */
val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1);
val32 &= 0xffffff00;
rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, val32 | 0x50);
rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, val32 | xa_agc);
if (priv->tx_paths > 1) {
val32 = rtl8xxxu_read32(priv, REG_OFDM0_XB_AGC_CORE1);
val32 &= 0xffffff00;
rtl8xxxu_write32(priv, REG_OFDM0_XB_AGC_CORE1,
val32 | 0x50);
rtl8xxxu_write32(priv, REG_OFDM0_XB_AGC_CORE1,
val32 | xb_agc);
}
/* Load 0xe30 IQC default value */
rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x01008c00);
rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x01008c00);
}
}
static void rtl8xxxu_prepare_calibrate(struct rtl8xxxu_priv *priv, u8 start)
{
struct h2c_cmd h2c;
......@@ -3893,7 +4569,7 @@ static void rtl8xxxu_prepare_calibrate(struct rtl8xxxu_priv *priv, u8 start)
rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.bt_wlan_calibration));
}
static void rtl8723a_phy_iq_calibrate(struct rtl8xxxu_priv *priv)
static void rtl8723au_phy_iq_calibrate(struct rtl8xxxu_priv *priv)
{
struct device *dev = &priv->udev->dev;
int result[4][8]; /* last is final result */
......@@ -3997,6 +4673,133 @@ static void rtl8723a_phy_iq_calibrate(struct rtl8xxxu_priv *priv)
rtl8xxxu_prepare_calibrate(priv, 0);
}
static void rtl8723bu_phy_iq_calibrate(struct rtl8xxxu_priv *priv)
{
struct device *dev = &priv->udev->dev;
int result[4][8]; /* last is final result */
int i, candidate;
bool path_a_ok, path_b_ok;
u32 reg_e94, reg_e9c, reg_ea4, reg_eac;
u32 reg_eb4, reg_ebc, reg_ec4, reg_ecc;
u32 val32, bt_control;
s32 reg_tmp = 0;
bool simu;
rtl8xxxu_prepare_calibrate(priv, 1);
memset(result, 0, sizeof(result));
candidate = -1;
path_a_ok = false;
path_b_ok = false;
bt_control = rtl8xxxu_read32(priv, REG_BT_CONTROL_8723BU);
for (i = 0; i < 3; i++) {
rtl8723bu_phy_iqcalibrate(priv, result, i);
if (i == 1) {
simu = rtl8723bu_simularity_compare(priv, result, 0, 1);
if (simu) {
candidate = 0;
break;
}
}
if (i == 2) {
simu = rtl8723bu_simularity_compare(priv, result, 0, 2);
if (simu) {
candidate = 0;
break;
}
simu = rtl8723bu_simularity_compare(priv, result, 1, 2);
if (simu) {
candidate = 1;
} else {
for (i = 0; i < 8; i++)
reg_tmp += result[3][i];
if (reg_tmp)
candidate = 3;
else
candidate = -1;
}
}
}
for (i = 0; i < 4; i++) {
reg_e94 = result[i][0];
reg_e9c = result[i][1];
reg_ea4 = result[i][2];
reg_eac = result[i][3];
reg_eb4 = result[i][4];
reg_ebc = result[i][5];
reg_ec4 = result[i][6];
reg_ecc = result[i][7];
}
if (candidate >= 0) {
reg_e94 = result[candidate][0];
priv->rege94 = reg_e94;
reg_e9c = result[candidate][1];
priv->rege9c = reg_e9c;
reg_ea4 = result[candidate][2];
reg_eac = result[candidate][3];
reg_eb4 = result[candidate][4];
priv->regeb4 = reg_eb4;
reg_ebc = result[candidate][5];
priv->regebc = reg_ebc;
reg_ec4 = result[candidate][6];
reg_ecc = result[candidate][7];
dev_dbg(dev, "%s: candidate is %x\n", __func__, candidate);
dev_dbg(dev,
"%s: e94 =%x e9c=%x ea4=%x eac=%x eb4=%x ebc=%x ec4=%x "
"ecc=%x\n ", __func__, reg_e94, reg_e9c,
reg_ea4, reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc);
path_a_ok = true;
path_b_ok = true;
} else {
reg_e94 = reg_eb4 = priv->rege94 = priv->regeb4 = 0x100;
reg_e9c = reg_ebc = priv->rege9c = priv->regebc = 0x0;
}
if (reg_e94 && candidate >= 0)
rtl8xxxu_fill_iqk_matrix_a(priv, path_a_ok, result,
candidate, (reg_ea4 == 0));
if (priv->tx_paths > 1 && reg_eb4)
rtl8xxxu_fill_iqk_matrix_b(priv, path_b_ok, result,
candidate, (reg_ec4 == 0));
rtl8xxxu_save_regs(priv, rtl8723au_iqk_phy_iq_bb_reg,
priv->bb_recovery_backup, RTL8XXXU_BB_REGS);
rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, bt_control);
val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT);
val32 |= 0x80000;
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32);
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x18000);
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f);
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xe6177);
val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED);
val32 |= 0x20;
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED, val32);
rtl8xxxu_write_rfreg(priv, RF_A, 0x43, 0x300bd);
if (priv->rf_paths > 1) {
dev_dbg(dev, "%s: beware 2T not yet supported\n", __func__);
#ifdef RTL8723BU_PATH_B
if (RF_Path == 0x0) //S1
ODM_SetIQCbyRFpath(pDM_Odm, 0);
else //S0
ODM_SetIQCbyRFpath(pDM_Odm, 1);
#endif
}
rtl8xxxu_prepare_calibrate(priv, 0);
}
static void rtl8723a_phy_lc_calibrate(struct rtl8xxxu_priv *priv)
{
u32 val32;
......@@ -4995,7 +5798,7 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
rtl8xxxu_write16(priv, REG_FAST_EDCA_CTRL, 0);
rtl8723a_phy_iq_calibrate(priv);
priv->fops->phy_iq_calibrate(priv);
/*
* This should enable thermal meter
......@@ -6536,6 +7339,7 @@ static struct rtl8xxxu_fileops rtl8723au_fops = {
.load_firmware = rtl8723au_load_firmware,
.power_on = rtl8723au_power_on,
.llt_init = rtl8xxxu_init_llt_table,
.phy_iq_calibrate = rtl8723au_phy_iq_calibrate,
.writeN_block_size = 1024,
.mbox_ext_reg = REG_HMBOX_EXT_0,
.mbox_ext_width = 2,
......@@ -6551,6 +7355,7 @@ static struct rtl8xxxu_fileops rtl8723bu_fops = {
.power_on = rtl8723au_power_on,
.llt_init = rtl8xxxu_auto_llt_table,
.phy_init_antenna_selection = rtl8723bu_phy_init_antenna_selection,
.phy_iq_calibrate = rtl8723bu_phy_iq_calibrate,
.writeN_block_size = 1024,
.mbox_ext_reg = REG_HMBOX_EXT0_8723B,
.mbox_ext_width = 4,
......@@ -6567,6 +7372,7 @@ static struct rtl8xxxu_fileops rtl8192cu_fops = {
.load_firmware = rtl8192cu_load_firmware,
.power_on = rtl8192cu_power_on,
.llt_init = rtl8xxxu_init_llt_table,
.phy_iq_calibrate = rtl8723au_phy_iq_calibrate,
.writeN_block_size = 128,
.mbox_ext_reg = REG_HMBOX_EXT_0,
.mbox_ext_width = 2,
......@@ -6583,6 +7389,7 @@ static struct rtl8xxxu_fileops rtl8192eu_fops = {
.load_firmware = rtl8192eu_load_firmware,
.power_on = rtl8192eu_power_on,
.llt_init = rtl8xxxu_auto_llt_table,
.phy_iq_calibrate = rtl8723bu_phy_iq_calibrate,
.writeN_block_size = 128,
.mbox_ext_reg = REG_HMBOX_EXT0_8723B,
.mbox_ext_width = 4,
......
......@@ -851,6 +851,7 @@ struct rtl8xxxu_fileops {
int (*power_on) (struct rtl8xxxu_priv *priv);
int (*llt_init) (struct rtl8xxxu_priv *priv, u8 last_tx_page);
void (*phy_init_antenna_selection) (struct rtl8xxxu_priv *priv);
void (*phy_iq_calibrate) (struct rtl8xxxu_priv *priv);
int writeN_block_size;
u16 mbox_ext_reg;
char mbox_ext_width;
......
......@@ -708,6 +708,12 @@
#define REG_MACID1 0x0700
#define REG_BSSID1 0x0708
/*
* This seems to be 8723bu specific
*/
#define REG_BT_CONTROL_8723BU 0x0764
#define BT_CONTROL_BT_GRANT BIT(12)
#define REG_FPGA0_RF_MODE 0x0800
#define FPGA_RF_MODE BIT(0)
#define FPGA_RF_MODE_JAPAN BIT(1)
......@@ -810,6 +816,7 @@
#define REG_RFE_CTRL_ANTA_SRC 0x0930 /* 8723BU */
#define REG_RFE_PATH_SELECT 0x0940 /* 8723BU */
#define REG_RFE_BUFFER 0x0944 /* 8723BU */
#define REG_S0S1_PATH_SWITCH 0x0948 /* 8723BU */
#define REG_CCK0_SYSTEM 0x0a00
#define CCK0_SIDEBAND BIT(4)
......@@ -1050,3 +1057,13 @@
#define RF6052_REG_TXPA_G1 0x31 /* RF TX PA control */
#define RF6052_REG_TXPA_G2 0x32 /* RF TX PA control */
#define RF6052_REG_TXPA_G3 0x33 /* RF TX PA control */
/*
* NextGen regs: 8723BU
*/
#define RF6052_REG_UNKNOWN_43 0x43
#define RF6052_REG_UNKNOWN_55 0x55
#define RF6052_REG_S0S1 0xb0
#define RF6052_REG_UNKNOWN_DF 0xdf
#define RF6052_REG_UNKNOWN_ED 0xed
#define RF6052_REG_WE_LUT 0xef
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment