Commit e19b0a34 authored by Vladyslav Tarasiuk's avatar Vladyslav Tarasiuk Committed by David S. Miller

net/mlx5: Refactor module EEPROM query

Prepare for ethtool_ops::get_module_eeprom_data() implementation by
extracting common part of mlx5_query_module_eeprom() into a separate
function.
Signed-off-by: default avatarVladyslav Tarasiuk <vladyslavt@nvidia.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent c781ff12
......@@ -353,67 +353,78 @@ static void mlx5_sfp_eeprom_params_set(u16 *i2c_addr, int *page_num, u16 *offset
*offset -= MLX5_EEPROM_PAGE_LENGTH;
}
int mlx5_query_module_eeprom(struct mlx5_core_dev *dev,
u16 offset, u16 size, u8 *data)
static int mlx5_query_mcia(struct mlx5_core_dev *dev,
struct mlx5_module_eeprom_query_params *params, u8 *data)
{
int module_num, status, err, page_num = 0;
u32 in[MLX5_ST_SZ_DW(mcia_reg)] = {};
u32 out[MLX5_ST_SZ_DW(mcia_reg)];
u16 i2c_addr = 0;
u8 module_id;
int status, err;
void *ptr;
u16 size;
size = min_t(int, params->size, MLX5_EEPROM_MAX_BYTES);
MLX5_SET(mcia_reg, in, l, 0);
MLX5_SET(mcia_reg, in, size, size);
MLX5_SET(mcia_reg, in, module, params->module_number);
MLX5_SET(mcia_reg, in, device_address, params->offset);
MLX5_SET(mcia_reg, in, page_number, params->page);
MLX5_SET(mcia_reg, in, i2c_device_address, params->i2c_address);
err = mlx5_query_module_num(dev, &module_num);
err = mlx5_core_access_reg(dev, in, sizeof(in), out,
sizeof(out), MLX5_REG_MCIA, 0, 0);
if (err)
return err;
err = mlx5_query_module_id(dev, module_num, &module_id);
status = MLX5_GET(mcia_reg, out, status);
if (status) {
mlx5_core_err(dev, "query_mcia_reg failed: status: 0x%x\n",
status);
return -EIO;
}
ptr = MLX5_ADDR_OF(mcia_reg, out, dword_0);
memcpy(data, ptr, size);
return size;
}
int mlx5_query_module_eeprom(struct mlx5_core_dev *dev,
u16 offset, u16 size, u8 *data)
{
struct mlx5_module_eeprom_query_params query = {0};
u8 module_id;
int err;
err = mlx5_query_module_num(dev, &query.module_number);
if (err)
return err;
err = mlx5_query_module_id(dev, query.module_number, &module_id);
if (err)
return err;
switch (module_id) {
case MLX5_MODULE_ID_SFP:
mlx5_sfp_eeprom_params_set(&i2c_addr, &page_num, &offset);
mlx5_sfp_eeprom_params_set(&query.i2c_address, &query.page, &query.offset);
break;
case MLX5_MODULE_ID_QSFP:
case MLX5_MODULE_ID_QSFP_PLUS:
case MLX5_MODULE_ID_QSFP28:
mlx5_qsfp_eeprom_params_set(&i2c_addr, &page_num, &offset);
mlx5_qsfp_eeprom_params_set(&query.i2c_address, &query.page, &query.offset);
break;
default:
mlx5_core_err(dev, "Module ID not recognized: 0x%x\n", module_id);
return -EINVAL;
}
if (offset + size > MLX5_EEPROM_PAGE_LENGTH)
if (query.offset + size > MLX5_EEPROM_PAGE_LENGTH)
/* Cross pages read, read until offset 256 in low page */
size -= offset + size - MLX5_EEPROM_PAGE_LENGTH;
size = min_t(int, size, MLX5_EEPROM_MAX_BYTES);
query.size = size;
MLX5_SET(mcia_reg, in, l, 0);
MLX5_SET(mcia_reg, in, module, module_num);
MLX5_SET(mcia_reg, in, i2c_device_address, i2c_addr);
MLX5_SET(mcia_reg, in, page_number, page_num);
MLX5_SET(mcia_reg, in, device_address, offset);
MLX5_SET(mcia_reg, in, size, size);
err = mlx5_core_access_reg(dev, in, sizeof(in), out,
sizeof(out), MLX5_REG_MCIA, 0, 0);
if (err)
return err;
status = MLX5_GET(mcia_reg, out, status);
if (status) {
mlx5_core_err(dev, "query_mcia_reg failed: status: 0x%x\n",
status);
return -EIO;
}
ptr = MLX5_ADDR_OF(mcia_reg, out, dword_0);
memcpy(data, ptr, size);
return size;
return mlx5_query_mcia(dev, &query, data);
}
EXPORT_SYMBOL_GPL(mlx5_query_module_eeprom);
......
......@@ -62,6 +62,15 @@ enum mlx5_an_status {
#define MLX5_EEPROM_PAGE_LENGTH 256
#define MLX5_EEPROM_HIGH_PAGE_LENGTH 128
struct mlx5_module_eeprom_query_params {
u16 size;
u16 offset;
u16 i2c_address;
u32 page;
u32 bank;
u32 module_number;
};
enum mlx5e_link_mode {
MLX5E_1000BASE_CX_SGMII = 0,
MLX5E_1000BASE_KX = 1,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment