Commit e1c25dc6 authored by Haavard Skinnemoen's avatar Haavard Skinnemoen

Merge branch 'master' of...

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/usba-2.6.26 into base
parents 03414e57 16a45bc8
......@@ -11,6 +11,7 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/spi/spi.h>
#include <linux/usb/atmel_usba_udc.h>
#include <asm/io.h>
#include <asm/irq.h>
......@@ -1351,9 +1352,39 @@ static struct clk usba0_hclk = {
.index = 6,
};
#define EP(nam, idx, maxpkt, maxbk, dma, isoc) \
[idx] = { \
.name = nam, \
.index = idx, \
.fifo_size = maxpkt, \
.nr_banks = maxbk, \
.can_dma = dma, \
.can_isoc = isoc, \
}
static struct usba_ep_data at32_usba_ep[] __initdata = {
EP("ep0", 0, 64, 1, 0, 0),
EP("ep1", 1, 512, 2, 1, 1),
EP("ep2", 2, 512, 2, 1, 1),
EP("ep3-int", 3, 64, 3, 1, 0),
EP("ep4-int", 4, 64, 3, 1, 0),
EP("ep5", 5, 1024, 3, 1, 1),
EP("ep6", 6, 1024, 3, 1, 1),
};
#undef EP
struct platform_device *__init
at32_add_device_usba(unsigned int id, struct usba_platform_data *data)
{
/*
* pdata doesn't have room for any endpoints, so we need to
* append room for the ones we need right after it.
*/
struct {
struct usba_platform_data pdata;
struct usba_ep_data ep[7];
} usba_data;
struct platform_device *pdev;
if (id != 0)
......@@ -1367,13 +1398,20 @@ at32_add_device_usba(unsigned int id, struct usba_platform_data *data)
ARRAY_SIZE(usba0_resource)))
goto out_free_pdev;
if (data) {
if (platform_device_add_data(pdev, data, sizeof(*data)))
goto out_free_pdev;
if (data)
usba_data.pdata.vbus_pin = data->vbus_pin;
else
usba_data.pdata.vbus_pin = -EINVAL;
if (data->vbus_pin != GPIO_PIN_NONE)
at32_select_gpio(data->vbus_pin, 0);
}
data = &usba_data.pdata;
data->num_ep = ARRAY_SIZE(at32_usba_ep);
memcpy(data->ep, at32_usba_ep, sizeof(at32_usba_ep));
if (platform_device_add_data(pdev, data, sizeof(usba_data)))
goto out_free_pdev;
if (data->vbus_pin >= 0)
at32_select_gpio(data->vbus_pin, 0);
usba0_pclk.dev = &pdev->dev;
usba0_hclk.dev = &pdev->dev;
......
......@@ -118,10 +118,10 @@ config USB_AMD5536UDC
config USB_GADGET_ATMEL_USBA
boolean "Atmel USBA"
select USB_GADGET_DUALSPEED
depends on AVR32
depends on AVR32 || ARCH_AT91CAP9
help
USBA is the integrated high-speed USB Device controller on
the AT32AP700x processors from Atmel.
the AT32AP700x and AT91CAP9 processors from Atmel.
config USB_ATMEL_USBA
tristate
......
......@@ -18,6 +18,7 @@
#include <linux/platform_device.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <linux/usb/atmel_usba_udc.h>
#include <linux/delay.h>
#include <asm/gpio.h>
......@@ -27,6 +28,7 @@
static struct usba_udc the_udc;
static struct usba_ep *usba_ep;
#ifdef CONFIG_USB_GADGET_DEBUG_FS
#include <linux/debugfs.h>
......@@ -324,53 +326,28 @@ static int vbus_is_present(struct usba_udc *udc)
return 1;
}
static void copy_to_fifo(void __iomem *fifo, const void *buf, int len)
#if defined(CONFIG_AVR32)
static void toggle_bias(int is_on)
{
unsigned long tmp;
DBG(DBG_FIFO, "copy to FIFO (len %d):\n", len);
for (; len > 0; len -= 4, buf += 4, fifo += 4) {
tmp = *(unsigned long *)buf;
if (len >= 4) {
DBG(DBG_FIFO, " -> %08lx\n", tmp);
__raw_writel(tmp, fifo);
} else {
do {
DBG(DBG_FIFO, " -> %02lx\n", tmp >> 24);
__raw_writeb(tmp >> 24, fifo);
fifo++;
tmp <<= 8;
} while (--len);
break;
}
}
}
static void copy_from_fifo(void *buf, void __iomem *fifo, int len)
#elif defined(CONFIG_ARCH_AT91)
#include <asm/arch/at91_pmc.h>
static void toggle_bias(int is_on)
{
union {
unsigned long *w;
unsigned char *b;
} p;
unsigned long tmp;
DBG(DBG_FIFO, "copy from FIFO (len %d):\n", len);
for (p.w = buf; len > 0; len -= 4, p.w++, fifo += 4) {
if (len >= 4) {
tmp = __raw_readl(fifo);
*p.w = tmp;
DBG(DBG_FIFO, " -> %08lx\n", tmp);
} else {
do {
tmp = __raw_readb(fifo);
*p.b = tmp;
DBG(DBG_FIFO, " -> %02lx\n", tmp);
fifo++, p.b++;
} while (--len);
}
}
unsigned int uckr = at91_sys_read(AT91_CKGR_UCKR);
if (is_on)
at91_sys_write(AT91_CKGR_UCKR, uckr | AT91_PMC_BIASEN);
else
at91_sys_write(AT91_CKGR_UCKR, uckr & ~(AT91_PMC_BIASEN));
}
#endif /* CONFIG_ARCH_AT91 */
static void next_fifo_transaction(struct usba_ep *ep, struct usba_request *req)
{
unsigned int transaction_len;
......@@ -387,7 +364,7 @@ static void next_fifo_transaction(struct usba_ep *ep, struct usba_request *req)
ep->ep.name, req, transaction_len,
req->last_transaction ? ", done" : "");
copy_to_fifo(ep->fifo, req->req.buf + req->req.actual, transaction_len);
memcpy_toio(ep->fifo, req->req.buf + req->req.actual, transaction_len);
usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
req->req.actual += transaction_len;
}
......@@ -476,7 +453,7 @@ static void receive_data(struct usba_ep *ep)
bytecount = req->req.length - req->req.actual;
}
copy_from_fifo(req->req.buf + req->req.actual,
memcpy_fromio(req->req.buf + req->req.actual,
ep->fifo, bytecount);
req->req.actual += bytecount;
......@@ -1029,33 +1006,6 @@ static const struct usb_gadget_ops usba_udc_ops = {
.set_selfpowered = usba_udc_set_selfpowered,
};
#define EP(nam, idx, maxpkt, maxbk, dma, isoc) \
{ \
.ep = { \
.ops = &usba_ep_ops, \
.name = nam, \
.maxpacket = maxpkt, \
}, \
.udc = &the_udc, \
.queue = LIST_HEAD_INIT(usba_ep[idx].queue), \
.fifo_size = maxpkt, \
.nr_banks = maxbk, \
.index = idx, \
.can_dma = dma, \
.can_isoc = isoc, \
}
static struct usba_ep usba_ep[] = {
EP("ep0", 0, 64, 1, 0, 0),
EP("ep1in-bulk", 1, 512, 2, 1, 1),
EP("ep2out-bulk", 2, 512, 2, 1, 1),
EP("ep3in-int", 3, 64, 3, 1, 0),
EP("ep4out-int", 4, 64, 3, 1, 0),
EP("ep5in-iso", 5, 1024, 3, 1, 1),
EP("ep6out-iso", 6, 1024, 3, 1, 1),
};
#undef EP
static struct usb_endpoint_descriptor usba_ep0_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
......@@ -1074,7 +1024,6 @@ static void nop_release(struct device *dev)
static struct usba_udc the_udc = {
.gadget = {
.ops = &usba_udc_ops,
.ep0 = &usba_ep[0].ep,
.ep_list = LIST_HEAD_INIT(the_udc.gadget.ep_list),
.is_dualspeed = 1,
.name = "atmel_usba_udc",
......@@ -1231,7 +1180,7 @@ static int do_test_mode(struct usba_udc *udc)
} else {
usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE);
usba_writel(udc, TST, USBA_TST_PKT_MODE);
copy_to_fifo(ep->fifo, test_packet_buffer,
memcpy_toio(ep->fifo, test_packet_buffer,
sizeof(test_packet_buffer));
usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
dev_info(dev, "Entering Test_Packet mode...\n");
......@@ -1530,13 +1479,13 @@ static void usba_control_irq(struct usba_udc *udc, struct usba_ep *ep)
DBG(DBG_HW, "Packet length: %u\n", pkt_len);
if (pkt_len != sizeof(crq)) {
pr_warning("udc: Invalid packet length %u "
"(expected %lu)\n", pkt_len, sizeof(crq));
"(expected %zu)\n", pkt_len, sizeof(crq));
set_protocol_stall(udc, ep);
return;
}
DBG(DBG_FIFO, "Copying ctrl request from 0x%p:\n", ep->fifo);
copy_from_fifo(crq.data, ep->fifo, sizeof(crq));
memcpy_fromio(crq.data, ep->fifo, sizeof(crq));
/* Free up one bank in the FIFO so that we can
* generate or receive a reply right away. */
......@@ -1688,6 +1637,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
DBG(DBG_INT, "irq, status=%#08x\n", status);
if (status & USBA_DET_SUSPEND) {
toggle_bias(0);
usba_writel(udc, INT_CLR, USBA_DET_SUSPEND);
DBG(DBG_BUS, "Suspend detected\n");
if (udc->gadget.speed != USB_SPEED_UNKNOWN
......@@ -1699,6 +1649,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
}
if (status & USBA_WAKE_UP) {
toggle_bias(1);
usba_writel(udc, INT_CLR, USBA_WAKE_UP);
DBG(DBG_BUS, "Wake Up CPU detected\n");
}
......@@ -1792,12 +1743,14 @@ static irqreturn_t usba_vbus_irq(int irq, void *devid)
vbus = gpio_get_value(udc->vbus_pin);
if (vbus != udc->vbus_prev) {
if (vbus) {
usba_writel(udc, CTRL, USBA_EN_USBA);
toggle_bias(1);
usba_writel(udc, CTRL, USBA_ENABLE_MASK);
usba_writel(udc, INT_ENB, USBA_END_OF_RESET);
} else {
udc->gadget.speed = USB_SPEED_UNKNOWN;
reset_all_endpoints(udc);
usba_writel(udc, CTRL, 0);
toggle_bias(0);
usba_writel(udc, CTRL, USBA_DISABLE_MASK);
spin_unlock(&udc->lock);
udc->driver->disconnect(&udc->gadget);
spin_lock(&udc->lock);
......@@ -1850,7 +1803,8 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
/* If Vbus is present, enable the controller and wait for reset */
spin_lock_irqsave(&udc->lock, flags);
if (vbus_is_present(udc) && udc->vbus_prev == 0) {
usba_writel(udc, CTRL, USBA_EN_USBA);
toggle_bias(1);
usba_writel(udc, CTRL, USBA_ENABLE_MASK);
usba_writel(udc, INT_ENB, USBA_END_OF_RESET);
}
spin_unlock_irqrestore(&udc->lock, flags);
......@@ -1883,7 +1837,8 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
spin_unlock_irqrestore(&udc->lock, flags);
/* This will also disable the DP pullup */
usba_writel(udc, CTRL, 0);
toggle_bias(0);
usba_writel(udc, CTRL, USBA_DISABLE_MASK);
driver->unbind(&udc->gadget);
udc->gadget.dev.driver = NULL;
......@@ -1908,7 +1863,7 @@ static int __init usba_udc_probe(struct platform_device *pdev)
regs = platform_get_resource(pdev, IORESOURCE_MEM, CTRL_IOMEM_ID);
fifo = platform_get_resource(pdev, IORESOURCE_MEM, FIFO_IOMEM_ID);
if (!regs || !fifo)
if (!regs || !fifo || !pdata)
return -ENXIO;
irq = platform_get_irq(pdev, 0);
......@@ -1953,19 +1908,48 @@ static int __init usba_udc_probe(struct platform_device *pdev)
/* Make sure we start from a clean slate */
clk_enable(pclk);
usba_writel(udc, CTRL, 0);
toggle_bias(0);
usba_writel(udc, CTRL, USBA_DISABLE_MASK);
clk_disable(pclk);
usba_ep = kmalloc(sizeof(struct usba_ep) * pdata->num_ep,
GFP_KERNEL);
if (!usba_ep)
goto err_alloc_ep;
the_udc.gadget.ep0 = &usba_ep[0].ep;
INIT_LIST_HEAD(&usba_ep[0].ep.ep_list);
usba_ep[0].ep_regs = udc->regs + USBA_EPT_BASE(0);
usba_ep[0].dma_regs = udc->regs + USBA_DMA_BASE(0);
usba_ep[0].fifo = udc->fifo + USBA_FIFO_BASE(0);
for (i = 1; i < ARRAY_SIZE(usba_ep); i++) {
usba_ep[0].ep.ops = &usba_ep_ops;
usba_ep[0].ep.name = pdata->ep[0].name;
usba_ep[0].ep.maxpacket = pdata->ep[0].fifo_size;
usba_ep[0].udc = &the_udc;
INIT_LIST_HEAD(&usba_ep[0].queue);
usba_ep[0].fifo_size = pdata->ep[0].fifo_size;
usba_ep[0].nr_banks = pdata->ep[0].nr_banks;
usba_ep[0].index = pdata->ep[0].index;
usba_ep[0].can_dma = pdata->ep[0].can_dma;
usba_ep[0].can_isoc = pdata->ep[0].can_isoc;
for (i = 1; i < pdata->num_ep; i++) {
struct usba_ep *ep = &usba_ep[i];
ep->ep_regs = udc->regs + USBA_EPT_BASE(i);
ep->dma_regs = udc->regs + USBA_DMA_BASE(i);
ep->fifo = udc->fifo + USBA_FIFO_BASE(i);
ep->ep.ops = &usba_ep_ops;
ep->ep.name = pdata->ep[i].name;
ep->ep.maxpacket = pdata->ep[i].fifo_size;
ep->udc = &the_udc;
INIT_LIST_HEAD(&ep->queue);
ep->fifo_size = pdata->ep[i].fifo_size;
ep->nr_banks = pdata->ep[i].nr_banks;
ep->index = pdata->ep[i].index;
ep->can_dma = pdata->ep[i].can_dma;
ep->can_isoc = pdata->ep[i].can_isoc;
list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
}
......@@ -1984,7 +1968,7 @@ static int __init usba_udc_probe(struct platform_device *pdev)
goto err_device_add;
}
if (pdata && pdata->vbus_pin != GPIO_PIN_NONE) {
if (pdata->vbus_pin >= 0) {
if (!gpio_request(pdata->vbus_pin, "atmel_usba_udc")) {
udc->vbus_pin = pdata->vbus_pin;
......@@ -2004,7 +1988,7 @@ static int __init usba_udc_probe(struct platform_device *pdev)
}
usba_init_debugfs(udc);
for (i = 1; i < ARRAY_SIZE(usba_ep); i++)
for (i = 1; i < pdata->num_ep; i++)
usba_ep_init_debugfs(udc, &usba_ep[i]);
return 0;
......@@ -2012,6 +1996,8 @@ static int __init usba_udc_probe(struct platform_device *pdev)
err_device_add:
free_irq(irq, udc);
err_request_irq:
kfree(usba_ep);
err_alloc_ep:
iounmap(udc->fifo);
err_map_fifo:
iounmap(udc->regs);
......@@ -2029,10 +2015,11 @@ static int __exit usba_udc_remove(struct platform_device *pdev)
{
struct usba_udc *udc;
int i;
struct usba_platform_data *pdata = pdev->dev.platform_data;
udc = platform_get_drvdata(pdev);
for (i = 1; i < ARRAY_SIZE(usba_ep); i++)
for (i = 1; i < pdata->num_ep; i++)
usba_ep_cleanup_debugfs(&usba_ep[i]);
usba_cleanup_debugfs(udc);
......@@ -2040,6 +2027,7 @@ static int __exit usba_udc_remove(struct platform_device *pdev)
gpio_free(udc->vbus_pin);
free_irq(udc->irq, udc);
kfree(usba_ep);
iounmap(udc->fifo);
iounmap(udc->regs);
clk_put(udc->hclk);
......
......@@ -41,6 +41,15 @@
#define USBA_EN_USBA (1 << 8)
#define USBA_DETACH (1 << 9)
#define USBA_REMOTE_WAKE_UP (1 << 10)
#define USBA_PULLD_DIS (1 << 11)
#if defined(CONFIG_AVR32)
#define USBA_ENABLE_MASK USBA_EN_USBA
#define USBA_DISABLE_MASK 0
#elif defined(CONFIG_ARCH_AT91)
#define USBA_ENABLE_MASK (USBA_EN_USBA | USBA_PULLD_DIS)
#define USBA_DISABLE_MASK USBA_DETACH
#endif /* CONFIG_ARCH_AT91 */
/* Bitfields in FNUM */
#define USBA_MICRO_FRAME_NUM_OFFSET 0
......
......@@ -38,9 +38,7 @@ struct platform_device *
at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
unsigned long fbmem_start, unsigned long fbmem_len);
struct usba_platform_data {
int vbus_pin;
};
struct usba_platform_data;
struct platform_device *
at32_add_device_usba(unsigned int id, struct usba_platform_data *data);
......
/*
* Platform data definitions for Atmel USBA gadget driver.
*/
#ifndef __LINUX_USB_USBA_H
#define __LINUX_USB_USBA_H
struct usba_ep_data {
char *name;
int index;
int fifo_size;
int nr_banks;
int can_dma;
int can_isoc;
};
struct usba_platform_data {
int vbus_pin;
int num_ep;
struct usba_ep_data ep[0];
};
#endif /* __LINUX_USB_USBA_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment