gpio: 104-idi-48: Migrate to the regmap-irq API
The regmap API supports IO port accessors so we can take advantage of regmap abstractions rather than handling access to the device registers directly in the driver. For the 104-idi-48, we get an IRQ register with some status information and basic masking, but it's broken down by banks rather than individual GPIO. There are six banks (8 GPIO lines each) that correspond to the lower six bits of the IRQ register (bits 0-5): Base Address + 7 (Read): IRQ Status Register/IRQ Clear Bit 0-5: Respective Bank IRQ Statuses Bit 6: IRQ Status (Active Low) Bit 7: IRQ Enable Status Base Address + 7 (Write): IRQ Enable/Disable Bit 0-5: Respective Bank IRQ Enable/Disable Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Showing
Please register or sign in to comment