Merge branches 'acpi-bus', 'acpi-doc' and 'acpi-pm'

* acpi-bus:
  ACPI: bus: change _ADR representation to 64 bits

* acpi-doc:
  Documentation: ACPI: Direct references are allowed to devices only
  Documentation: ACPI: Use tabs for graph ASL indentation

* acpi-pm:
  ACPI: PM: Set enable_for_wake for wakeup GPEs during suspend-to-idle

Documentation/firmware-guide/acpi/dsd/data-node-references.rst

@@ -45,8 +45,8 @@ the ANOD object which is also the final target node of the reference.
 	    Name (_DSD, Package () {
 		ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
 		Package () {
-		    Package () { "node@0", NOD0 },
-		    Package () { "node@1", NOD1 },
+		    Package () { "node@0", "NOD0" },
+		    Package () { "node@1", "NOD1" },
 		}
 	    })
 	    Name (NOD0, Package() {
@@ -58,7 +58,7 @@ the ANOD object which is also the final target node of the reference.
 	    Name (NOD1, Package() {
 		ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
 		Package () {
-		    Package () { "anothernode", ANOD },
+		    Package () { "anothernode", "ANOD" },
 		}
 	    })
 	    Name (ANOD, Package() {

Documentation/firmware-guide/acpi/dsd/graph.rst

@@ -45,7 +45,7 @@ with "port" and must be followed by the "@" character and the number of the
 port as its key. The target object it refers to should be called "PRTX", where
 "X" is the number of the port. An example of such a package would be::
 
-    Package() { "port@4", PRT4 }
+    Package() { "port@4", "PRT4" }
 
 Further on, endpoints are located under the port nodes. The hierarchical
 data extension key of the endpoint nodes must begin with
@@ -54,7 +54,7 @@ endpoint. The object it refers to should be called "EPXY", where "X" is the
 number of the port and "Y" is the number of the endpoint. An example of such a
 package would be::
 
-    Package() { "endpoint@0", EP40 }
+    Package() { "endpoint@0", "EP40" }
 
 Each port node contains a property extension key "port", the value of which is
 the number of the port. Each endpoint is similarly numbered with a property
@@ -91,7 +91,7 @@ A simple example of this is show below::
 		},
 		ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
 		Package () {
-                    Package () { "port@0", PRT0 },
+		    Package () { "port@0", "PRT0" },
 		}
 	    })
 	    Name (PRT0, Package() {
@@ -101,7 +101,7 @@ A simple example of this is show below::
 		},
 		ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
 		Package () {
-                    Package () { "endpoint@0", EP00 },
+		    Package () { "endpoint@0", "EP00" },
 		}
 	    })
 	    Name (EP00, Package() {
@@ -121,7 +121,7 @@ A simple example of this is show below::
 	    Name (_DSD, Package () {
 		ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
 		Package () {
-                    Package () { "port@4", PRT4 },
+		    Package () { "port@4", "PRT4" },
 		}
 	    })
 
@@ -132,7 +132,7 @@ A simple example of this is show below::
 		},
 		ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
 		Package () {
-                    Package () { "endpoint@0", EP40 },
+		    Package () { "endpoint@0", "EP40" },
 		}
 	    })
 

drivers/acpi/device_sysfs.c

@@ -428,8 +428,10 @@ static ssize_t acpi_device_adr_show(struct device *dev,
 {
 	struct acpi_device *acpi_dev = to_acpi_device(dev);
 
-	return sprintf(buf, "0x%08x\n",
-		       (unsigned int)(acpi_dev->pnp.bus_address));
+	if (acpi_dev->pnp.bus_address > U32_MAX)
+		return sprintf(buf, "0x%016llx\n", acpi_dev->pnp.bus_address);
+	else
+		return sprintf(buf, "0x%08llx\n", acpi_dev->pnp.bus_address);
 }
 static DEVICE_ATTR(adr, 0444, acpi_device_adr_show, NULL);
 

drivers/acpi/sleep.c

@@ -977,6 +977,8 @@ static int acpi_s2idle_prepare(void)
 	if (acpi_sci_irq_valid())
 		enable_irq_wake(acpi_sci_irq);
 
+	acpi_enable_wakeup_devices(ACPI_STATE_S0);
+
 	/* Change the configuration of GPEs to avoid spurious wakeup. */
 	acpi_enable_all_wakeup_gpes();
 	acpi_os_wait_events_complete();
@@ -1027,6 +1029,8 @@ static void acpi_s2idle_restore(void)
 {
 	acpi_enable_all_runtime_gpes();
 
+	acpi_disable_wakeup_devices(ACPI_STATE_S0);
+
 	if (acpi_sci_irq_valid())
 		disable_irq_wake(acpi_sci_irq);
 

include/acpi/acpi_bus.h

@@ -230,7 +230,7 @@ struct acpi_device_dir {
 /* Plug and Play */
 
 typedef char acpi_bus_id[8];
-typedef unsigned long acpi_bus_address;
+typedef u64 acpi_bus_address;
 typedef char acpi_device_name[40];
 typedef char acpi_device_class[20];