Merge tag 'usb-serial-4.18-rc4' of...

Merge tag 'usb-serial-4.18-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus

USB-serial fixes for v4.18-rc4

Here are three fixes for broken control-transfer error handling, which
could lead to uninitialised slab data leaking to user space.

Included is also a new device id for cp210x.

All but the final two patches have been in linux-next with no reported
issues.
Signed-off-by: Johan Hovold <johan@kernel.org>

drivers/usb/serial/ch341.c

@@ -128,7 +128,7 @@ static int ch341_control_in(struct usb_device *dev,
 	r = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), request,
 			    USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
 			    value, index, buf, bufsize, DEFAULT_TIMEOUT);
-	if (r < bufsize) {
+	if (r < (int)bufsize) {
 		if (r >= 0) {
 			dev_err(&dev->dev,
 				"short control message received (%d < %u)\n",

drivers/usb/serial/cp210x.c

@@ -149,6 +149,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x8977) },	/* CEL MeshWorks DevKit Device */
 	{ USB_DEVICE(0x10C4, 0x8998) }, /* KCF Technologies PRN */
 	{ USB_DEVICE(0x10C4, 0x89A4) }, /* CESINEL FTBC Flexible Thyristor Bridge Controller */
+	{ USB_DEVICE(0x10C4, 0x89FB) }, /* Qivicon ZigBee USB Radio Stick */
 	{ USB_DEVICE(0x10C4, 0x8A2A) }, /* HubZ dual ZigBee and Z-Wave dongle */
 	{ USB_DEVICE(0x10C4, 0x8A5E) }, /* CEL EM3588 ZigBee USB Stick Long Range */
 	{ USB_DEVICE(0x10C4, 0x8B34) }, /* Qivicon ZigBee USB Radio Stick */

drivers/usb/serial/keyspan_pda.c

@@ -369,8 +369,10 @@ static int keyspan_pda_get_modem_info(struct usb_serial *serial,
 			     3, /* get pins */
 			     USB_TYPE_VENDOR|USB_RECIP_INTERFACE|USB_DIR_IN,
 			     0, 0, data, 1, 2000);
-	if (rc >= 0)
+	if (rc == 1)
 		*value = *data;
+	else if (rc >= 0)
+		rc = -EIO;
 
 	kfree(data);
 	return rc;

drivers/usb/serial/mos7840.c

@@ -468,6 +468,9 @@ static void mos7840_control_callback(struct urb *urb)
 	}
 
 	dev_dbg(dev, "%s urb buffer size is %d\n", __func__, urb->actual_length);
+	if (urb->actual_length < 1)
+		goto out;
+
 	dev_dbg(dev, "%s mos7840_port->MsrLsr is %d port %d\n", __func__,
 		mos7840_port->MsrLsr, mos7840_port->port_num);
 	data = urb->transfer_buffer;