i40e: Wrong 'Advertised FEC modes' after set FEC to AUTO

Fix display of parameters "Configured FEC encodings:" and "Advertised
FEC modes:" in ethtool.  Implemented by setting proper FEC bits in
“advertising” bitmask of link_modes struct and “fec” bitmask in
ethtool_fecparam struct. Without this patch wrong FEC settings
can be shown.
Signed-off-by: Jaroslaw Gawin <jaroslawx.gawin@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/ethernet/intel/i40e/i40e_common.c

@@ -2570,9 +2570,16 @@ noinline_for_stack i40e_status i40e_update_link_info(struct i40e_hw *hw)
 		if (status)
 			return status;
 
+		if (abilities.fec_cfg_curr_mod_ext_info &
+		    I40E_AQ_ENABLE_FEC_AUTO)
+			hw->phy.link_info.req_fec_info =
+				(I40E_AQ_REQUEST_FEC_KR |
+				 I40E_AQ_REQUEST_FEC_RS);
+		else
 			hw->phy.link_info.req_fec_info =
 				abilities.fec_cfg_curr_mod_ext_info &
-			(I40E_AQ_REQUEST_FEC_KR | I40E_AQ_REQUEST_FEC_RS);
+				(I40E_AQ_REQUEST_FEC_KR |
+				 I40E_AQ_REQUEST_FEC_RS);
 
 		memcpy(hw->phy.link_info.module_type, &abilities.module_type,
 		       sizeof(hw->phy.link_info.module_type));

drivers/net/ethernet/intel/i40e/i40e_ethtool.c

@@ -722,7 +722,14 @@ static void i40e_get_settings_link_up_fec(u8 req_fec_info,
 	ethtool_link_ksettings_add_link_mode(ks, supported, FEC_RS);
 	ethtool_link_ksettings_add_link_mode(ks, supported, FEC_BASER);
 
-	if (I40E_AQ_SET_FEC_REQUEST_RS & req_fec_info) {
+	if ((I40E_AQ_SET_FEC_REQUEST_RS & req_fec_info) &&
+	    (I40E_AQ_SET_FEC_REQUEST_KR & req_fec_info)) {
+		ethtool_link_ksettings_add_link_mode(ks, advertising,
+						     FEC_NONE);
+		ethtool_link_ksettings_add_link_mode(ks, advertising,
+						     FEC_BASER);
+		ethtool_link_ksettings_add_link_mode(ks, advertising, FEC_RS);
+	} else if (I40E_AQ_SET_FEC_REQUEST_RS & req_fec_info) {
 		ethtool_link_ksettings_add_link_mode(ks, advertising, FEC_RS);
 	} else if (I40E_AQ_SET_FEC_REQUEST_KR & req_fec_info) {
 		ethtool_link_ksettings_add_link_mode(ks, advertising,
@@ -730,12 +737,6 @@ static void i40e_get_settings_link_up_fec(u8 req_fec_info,
 	} else {
 		ethtool_link_ksettings_add_link_mode(ks, advertising,
 						     FEC_NONE);
-		if (I40E_AQ_SET_FEC_AUTO & req_fec_info) {
-			ethtool_link_ksettings_add_link_mode(ks, advertising,
-							     FEC_RS);
-			ethtool_link_ksettings_add_link_mode(ks, advertising,
-							     FEC_BASER);
-		}
 	}
 }
 
@@ -1437,6 +1438,7 @@ static int i40e_get_fec_param(struct net_device *netdev,
 	struct i40e_hw *hw = &pf->hw;
 	i40e_status status = 0;
 	int err = 0;
+	u8 fec_cfg;
 
 	/* Get the current phy config */
 	memset(&abilities, 0, sizeof(abilities));
@@ -1448,18 +1450,16 @@ static int i40e_get_fec_param(struct net_device *netdev,
 	}
 
 	fecparam->fec = 0;
-	if (abilities.fec_cfg_curr_mod_ext_info & I40E_AQ_SET_FEC_AUTO)
+	fec_cfg = abilities.fec_cfg_curr_mod_ext_info;
+	if (fec_cfg & I40E_AQ_SET_FEC_AUTO)
 		fecparam->fec |= ETHTOOL_FEC_AUTO;
-	if ((abilities.fec_cfg_curr_mod_ext_info &
-	     I40E_AQ_SET_FEC_REQUEST_RS) ||
-	    (abilities.fec_cfg_curr_mod_ext_info &
+	else if (fec_cfg & (I40E_AQ_SET_FEC_REQUEST_RS |
 		 I40E_AQ_SET_FEC_ABILITY_RS))
 		fecparam->fec |= ETHTOOL_FEC_RS;
-	if ((abilities.fec_cfg_curr_mod_ext_info &
-	     I40E_AQ_SET_FEC_REQUEST_KR) ||
-	    (abilities.fec_cfg_curr_mod_ext_info & I40E_AQ_SET_FEC_ABILITY_KR))
+	else if (fec_cfg & (I40E_AQ_SET_FEC_REQUEST_KR |
+		 I40E_AQ_SET_FEC_ABILITY_KR))
 		fecparam->fec |= ETHTOOL_FEC_BASER;
-	if (abilities.fec_cfg_curr_mod_ext_info == 0)
+	if (fec_cfg == 0)
 		fecparam->fec |= ETHTOOL_FEC_OFF;
 
 	if (hw->phy.link_info.fec_info & I40E_AQ_CONFIG_FEC_KR_ENA)