Merge tag 'renesas-dt2-for-v3.20' of...

Merge tag 'renesas-dt2-for-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Merge "Second Round of Renesas ARM Based SoC DT Updates for v3.20" from Simon
Horman:

* Support Renesas memory controllers
* Add SRC interrupt number on r8a779~ and r8a7791 SoCs
* Fix MSTP8 input clocks on r8a7791 SoC
* Add PM domain support to r8a7740
* Add DT bindings for the R-Mobile System Controller
* Use Add sh73a0-specific FSI2 compatible property

* tag 'renesas-dt2-for-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  PM / Domains: R-Mobile SYSC: Document SH-Mobile AG5 (sh73a0) binding
  ARM: shmobile: sh73a0 dtsi: Add memory-controller nodes
  ARM: shmobile: r8a7740 dtsi: Add memory-controller node
  ARM: shmobile: r8a73a4 dtsi: Add memory-controller nodes
  ARM: shmobile: Add DT bindings for Renesas memory controllers
  ARM: shmobile: r8a7791: add SRC interrupt number on DTSI
  ARM: shmobile: r8a7790: add SRC interrupt number on DTSI
  ARM: shmobile: r8a7791: fix MSTP8 input clocks
  ARM: shmobile: r8a7740 dtsi: Add PM domain support
  PM / Domains: Add DT bindings for the R-Mobile System Controller
  ARM: shmobile: sh73a0 dtsi: Add SoC-specific FSI2 compatible property
Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/memory-controllers/renesas-memory-controllers.txt

+DT bindings for Renesas R-Mobile and SH-Mobile memory controllers
+=================================================================
+
+Renesas R-Mobile and SH-Mobile SoCs contain one or more memory controllers.
+These memory controllers differ from one SoC variant to another, and are called
+by different names ("DDR Bus Controller (DBSC)", "DDR3 Bus State Controller
+(DBSC3)", "SDRAM Bus State Controller (SBSC)").
+
+Currently memory controller device nodes are used only to reference PM
+domains, and prevent these PM domains from being powered down, which would
+crash the system.
+
+As there exist no actual drivers for these controllers yet, these bindings
+should be considered EXPERIMENTAL for now.
+
+Required properties:
+  - compatible: Must be one of the following SoC-specific values:
+		  - "renesas,dbsc-r8a73a4" (R-Mobile APE6)
+		  - "renesas,dbsc3-r8a7740" (R-Mobile A1)
+		  - "renesas,sbsc-sh73a0" (SH-Mobile AG5)
+  - reg: Must contain the base address and length of the memory controller's
+	 registers.
+
+Optional properties:
+  - interrupts: Must contain a list of interrupt specifiers for memory
+		controller interrupts, if available.
+  - interrupts-names: Must contain a list of interrupt names corresponding to
+		      the interrupts in the interrupts property, if available.
+		      Valid interrupt names are:
+			- "sec" (secure interrupt)
+			- "temp" (normal (temperature) interrupt)
+  - power-domains: Must contain a reference to the PM domain that the memory
+		   controller belongs to, if available.
+
+Example:
+
+	sbsc1: memory-controller@fe400000 {
+		compatible = "renesas,sbsc-sh73a0";
+		reg = <0xfe400000 0x400>;
+		interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 36 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "sec", "temp";
+		power-domains = <&pd_a4bc0>;
+	};

Documentation/devicetree/bindings/power/renesas,sysc-rmobile.txt

+DT bindings for the Renesas R-Mobile System Controller
+
+== System Controller Node ==
+
+The R-Mobile System Controller provides the following functions:
+  - Boot mode management,
+  - Reset generation,
+  - Power management.
+
+Required properties:
+- compatible: Should be "renesas,sysc-<soctype>", "renesas,sysc-rmobile" as
+	      fallback.
+	      Examples with soctypes are:
+		- "renesas,sysc-r8a7740" (R-Mobile A1)
+		- "renesas,sysc-sh73a0" (SH-Mobile AG5)
+- reg: Two address start and address range blocks for the device:
+         - The first block refers to the normally accessible registers,
+         - the second block refers to the registers protected by the HPB
+	   semaphore.
+
+Optional nodes:
+- pm-domains: This node contains a hierarchy of PM domain nodes, which should
+  match the Power Area Hierarchy in the Power Domain Specifications section of
+  the device's datasheet.
+
+
+== PM Domain Nodes ==
+
+Each of the PM domain nodes represents a PM domain, as documented by the
+generic PM domain bindings in
+Documentation/devicetree/bindings/power/power_domain.txt.
+
+The nodes should be named by the real power area names, and thus their names
+should be unique.
+
+Required properties:
+  - #power-domain-cells: Must be 0.
+
+Optional properties:
+- reg: If the PM domain is not always-on, this property must contain the bit
+       index number for the corresponding power area in the various Power
+       Control and Status Registers. The parent's node must contain the
+       following two properties:
+	 - #address-cells: Must be 1,
+	 - #size-cells: Must be 0.
+       If the PM domain is always-on, this property must be omitted.
+
+
+Example:
+
+This shows a subset of the r8a7740 PM domain hierarchy, containing the
+C5 "always-on" domain, 2 of its subdomains (A4S and A4SU), and the A3SP domain,
+which is a subdomain of A4S.
+
+	sysc: system-controller@e6180000 {
+		compatible = "renesas,sysc-r8a7740", "renesas,sysc-rmobile";
+		reg = <0xe6180000 0x8000>, <0xe6188000 0x8000>;
+
+		pm-domains {
+			pd_c5: c5 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#power-domain-cells = <0>;
+
+				pd_a4s: a4s@10 {
+					reg = <10>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <0>;
+
+					pd_a3sp: a3sp@11 {
+						reg = <11>;
+						#power-domain-cells = <0>;
+					};
+				};
+
+				pd_a4su: a4su@20 {
+					reg = <20>;
+					#power-domain-cells = <0>;
+				};
+			};
+		};
+	};
+
+
+== PM Domain Consumers ==
+
+Hardware blocks belonging to a PM domain should contain a "power-domains"
+property that is a phandle pointing to the corresponding PM domain node.
+
+Example:
+
+	tpu: pwm@e6600000 {
+		compatible = "renesas,tpu-r8a7740", "renesas,tpu";
+		reg = <0xe6600000 0x100>;
+		clocks = <&mstp3_clks R8A7740_CLK_TPU0>;
+		power-domains = <&pd_a3sp>;
+		#pwm-cells = <3>;
+	};

arch/arm/boot/dts/r8a73a4.dtsi

@@ -38,6 +38,16 @@ timer {
 			     <1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
+	dbsc1: memory-controller@e6790000 {
+		compatible = "renesas,dbsc-r8a73a4";
+		reg = <0 0xe6790000 0 0x10000>;
+	};
+
+	dbsc2: memory-controller@e67a0000 {
+		compatible = "renesas,dbsc-r8a73a4";
+		reg = <0 0xe67a0000 0 0x10000>;
+	};
+
 	dmac: dma-multiplexer {
 		compatible = "renesas,shdma-mux";
 		#dma-cells = <1>;

arch/arm/boot/dts/r8a7740.dtsi

@@ -25,6 +25,7 @@ cpu@0 {
 			device_type = "cpu";
 			reg = <0x0>;
 			clock-frequency = <800000000>;
+			power-domains = <&pd_a3sm>;
 		};
 	};
 
@@ -36,17 +37,29 @@ gic: interrupt-controller@c2800000 {
 		      <0xc2000000 0x1000>;
 	};
 
+	dbsc3: memory-controller@fe400000 {
+		compatible = "renesas,dbsc3-r8a7740";
+		reg = <0xfe400000 0x400>;
+		power-domains = <&pd_a4s>;
+	};
+
 	pmu {
 		compatible = "arm,cortex-a9-pmu";
 		interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+	ptm {
+		compatible = "arm,coresight-etm3x";
+		power-domains = <&pd_d4>;
+	};
+
 	cmt1: timer@e6138000 {
 		compatible = "renesas,cmt-48-r8a7740", "renesas,cmt-48";
 		reg = <0xe6138000 0x170>;
 		interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7740_CLK_CMT1>;
 		clock-names = "fck";
+		power-domains = <&pd_c5>;
 
 		renesas,channels-mask = <0x3f>;
 
@@ -72,6 +85,7 @@ irqpin0: irqpin@e6900000 {
 			      0 149 IRQ_TYPE_LEVEL_HIGH
 			      0 149 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
+		power-domains = <&pd_a4s>;
 	};
 
 	/* irqpin1: IRQ8 - IRQ15 */
@@ -93,6 +107,7 @@ irqpin1: irqpin@e6900004 {
 			      0 149 IRQ_TYPE_LEVEL_HIGH
 			      0 149 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
+		power-domains = <&pd_a4s>;
 	};
 
 	/* irqpin2: IRQ16 - IRQ23 */
@@ -114,6 +129,7 @@ irqpin2: irqpin@e6900008 {
 			      0 149 IRQ_TYPE_LEVEL_HIGH
 			      0 149 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
+		power-domains = <&pd_a4s>;
 	};
 
 	/* irqpin3: IRQ24 - IRQ31 */
@@ -135,6 +151,7 @@ irqpin3: irqpin@e690000c {
 			      0 149 IRQ_TYPE_LEVEL_HIGH
 			      0 149 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
+		power-domains = <&pd_a4s>;
 	};
 
 	ether: ethernet@e9a00000 {
@@ -143,6 +160,7 @@ ether: ethernet@e9a00000 {
 		      <0xe9a01800 0x800>;
 		interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7740_CLK_GETHER>;
+		power-domains = <&pd_a4s>;
 		phy-mode = "mii";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -159,6 +177,7 @@ i2c0: i2c@fff20000 {
 			      0 203 IRQ_TYPE_LEVEL_HIGH
 			      0 204 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7740_CLK_IIC0>;
+		power-domains = <&pd_a4r>;
 		status = "disabled";
 	};
 
@@ -172,6 +191,7 @@ i2c1: i2c@e6c20000 {
 			      0 72 IRQ_TYPE_LEVEL_HIGH
 			      0 73 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7740_CLK_IIC1>;
+		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
 
@@ -181,6 +201,7 @@ scifa0: serial@e6c40000 {
 		interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7740_CLK_SCIFA0>;
 		clock-names = "sci_ick";
+		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
 
@@ -190,6 +211,7 @@ scifa1: serial@e6c50000 {
 		interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7740_CLK_SCIFA1>;
 		clock-names = "sci_ick";
+		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
 
@@ -199,6 +221,7 @@ scifa2: serial@e6c60000 {
 		interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7740_CLK_SCIFA2>;
 		clock-names = "sci_ick";
+		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
 
@@ -208,6 +231,7 @@ scifa3: serial@e6c70000 {
 		interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7740_CLK_SCIFA3>;
 		clock-names = "sci_ick";
+		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
 
@@ -217,6 +241,7 @@ scifa4: serial@e6c80000 {
 		interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7740_CLK_SCIFA4>;
 		clock-names = "sci_ick";
+		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
 
@@ -226,6 +251,7 @@ scifa5: serial@e6cb0000 {
 		interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7740_CLK_SCIFA5>;
 		clock-names = "sci_ick";
+		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
 
@@ -235,6 +261,7 @@ scifa6: serial@e6cc0000 {
 		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7740_CLK_SCIFA6>;
 		clock-names = "sci_ick";
+		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
 
@@ -244,6 +271,7 @@ scifa7: serial@e6cd0000 {
 		interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7740_CLK_SCIFA7>;
 		clock-names = "sci_ick";
+		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
 
@@ -253,6 +281,7 @@ scifb8: serial@e6c30000 {
 		interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7740_CLK_SCIFB>;
 		clock-names = "sci_ick";
+		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
 
@@ -271,12 +300,14 @@ pfc: pfc@e6050000 {
 			<&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>,
 			<&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>,
 			<&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>;
+		power-domains = <&pd_c5>;
 	};
 
 	tpu: pwm@e6600000 {
 		compatible = "renesas,tpu-r8a7740", "renesas,tpu";
 		reg = <0xe6600000 0x100>;
 		clocks = <&mstp3_clks R8A7740_CLK_TPU0>;
+		power-domains = <&pd_a3sp>;
 		status = "disabled";
 		#pwm-cells = <3>;
 	};
@@ -287,6 +318,7 @@ mmcif0: mmc@e6bd0000 {
 		interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH
 			      0 57 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7740_CLK_MMC>;
+		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
 
@@ -297,6 +329,7 @@ sdhi0: sd@e6850000 {
 			      0 118 IRQ_TYPE_LEVEL_HIGH
 			      0 119 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7740_CLK_SDHI0>;
+		power-domains = <&pd_a3sp>;
 		cap-sd-highspeed;
 		cap-sdio-irq;
 		status = "disabled";
@@ -309,6 +342,7 @@ sdhi1: sd@e6860000 {
 			      0 122 IRQ_TYPE_LEVEL_HIGH
 			      0 123 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7740_CLK_SDHI1>;
+		power-domains = <&pd_a3sp>;
 		cap-sd-highspeed;
 		cap-sdio-irq;
 		status = "disabled";
@@ -321,6 +355,7 @@ sdhi2: sd@e6870000 {
 			      0 126 IRQ_TYPE_LEVEL_HIGH
 			      0 127 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R8A7740_CLK_SDHI2>;
+		power-domains = <&pd_a3sp>;
 		cap-sd-highspeed;
 		cap-sdio-irq;
 		status = "disabled";
@@ -332,6 +367,7 @@ sh_fsi2: sound@fe1f0000 {
 		reg = <0xfe1f0000 0x400>;
 		interrupts = <0 9 0x4>;
 		clocks = <&mstp3_clks R8A7740_CLK_FSI>;
+		power-domains = <&pd_a4mp>;
 		status = "disabled";
 	};
 
@@ -343,6 +379,7 @@ tmu0: timer@fff80000 {
 			     <0 200 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7740_CLK_TMU0>;
 		clock-names = "fck";
+		power-domains = <&pd_a4r>;
 
 		#renesas,channels = <3>;
 
@@ -357,6 +394,7 @@ tmu1: timer@fff90000 {
 			     <0 172 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7740_CLK_TMU1>;
 		clock-names = "fck";
+		power-domains = <&pd_a4r>;
 
 		#renesas,channels = <3>;
 
@@ -543,4 +581,71 @@ R8A7740_CLK_USBFUNC R8A7740_CLK_USBPHY
 				"usbhost", "sdhi2", "usbfunc", "usphy";
 		};
 	};
+
+	sysc: system-controller@e6180000 {
+		compatible = "renesas,sysc-r8a7740", "renesas,sysc-rmobile";
+		reg = <0xe6180000 0x8000>, <0xe6188000 0x8000>;
+
+		pm-domains {
+			pd_c5: c5 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#power-domain-cells = <0>;
+
+				pd_a4lc: a4lc@1 {
+					reg = <1>;
+					#power-domain-cells = <0>;
+				};
+
+				pd_a4mp: a4mp@2 {
+					reg = <2>;
+					#power-domain-cells = <0>;
+				};
+
+				pd_d4: d4@3 {
+					reg = <3>;
+					#power-domain-cells = <0>;
+				};
+
+				pd_a4r: a4r@5 {
+					reg = <5>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <0>;
+
+					pd_a3rv: a3rv@6 {
+						reg = <6>;
+						#power-domain-cells = <0>;
+					};
+				};
+
+				pd_a4s: a4s@10 {
+					reg = <10>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <0>;
+
+					pd_a3sp: a3sp@11 {
+						reg = <11>;
+						#power-domain-cells = <0>;
+					};
+
+					pd_a3sm: a3sm@12 {
+						reg = <12>;
+						#power-domain-cells = <0>;
+					};
+
+					pd_a3sg: a3sg@13 {
+						reg = <13>;
+						#power-domain-cells = <0>;
+					};
+				};
+
+				pd_a4su: a4su@20 {
+					reg = <20>;
+					#power-domain-cells = <0>;
+				};
+			};
+		};
+	};
 };

arch/arm/boot/dts/r8a7790.dtsi

@@ -1440,16 +1440,16 @@ rcar_sound,dvc {
 		};
 
 		rcar_sound,src {
-			src0: src@0 { };
-			src1: src@1 { };
-			src2: src@2 { };
-			src3: src@3 { };
-			src4: src@4 { };
-			src5: src@5 { };
-			src6: src@6 { };
-			src7: src@7 { };
-			src8: src@8 { };
-			src9: src@9 { };
+			src0: src@0 { interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>; };
+			src1: src@1 { interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>; };
+			src2: src@2 { interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>; };
+			src3: src@3 { interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>; };
+			src4: src@4 { interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>; };
+			src5: src@5 { interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>; };
+			src6: src@6 { interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>; };
+			src7: src@7 { interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>; };
+			src8: src@8 { interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>; };
+			src9: src@9 { interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>; };
 		};
 
 		rcar_sound,ssi {

arch/arm/boot/dts/r8a7791.dtsi

@@ -1154,7 +1154,7 @@ R8A7791_CLK_LVDS0
 		mstp8_clks: mstp8_clks@e6150990 {
 			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
-			clocks = <&hp_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>,
+			clocks = <&zg_clk>, <&hp_clk>, <&zg_clk>, <&zg_clk>,
 			         <&zg_clk>, <&p_clk>, <&zs_clk>, <&zs_clk>;
 			#clock-cells = <1>;
 			clock-indices = <
@@ -1425,16 +1425,16 @@ rcar_sound,dvc {
 		};
 
 		rcar_sound,src {
-			src0: src@0 { };
-			src1: src@1 { };
-			src2: src@2 { };
-			src3: src@3 { };
-			src4: src@4 { };
-			src5: src@5 { };
-			src6: src@6 { };
-			src7: src@7 { };
-			src8: src@8 { };
-			src9: src@9 { };
+			src0: src@0 { interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>; };
+			src1: src@1 { interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>; };
+			src2: src@2 { interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>; };
+			src3: src@3 { interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>; };
+			src4: src@4 { interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>; };
+			src5: src@5 { interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>; };
+			src6: src@6 { interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>; };
+			src7: src@7 { interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>; };
+			src8: src@8 { interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>; };
+			src9: src@9 { interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>; };
 		};
 
 		rcar_sound,ssi {

arch/arm/boot/dts/sh73a0.dtsi

@@ -42,6 +42,22 @@ gic: interrupt-controller@f0001000 {
 		      <0xf0000100 0x100>;
 	};
 
+	sbsc2: memory-controller@fb400000 {
+		compatible = "renesas,sbsc-sh73a0";
+		reg = <0xfb400000 0x400>;
+		interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 38 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "sec", "temp";
+	};
+
+	sbsc1: memory-controller@fe400000 {
+		compatible = "renesas,sbsc-sh73a0";
+		reg = <0xfe400000 0x400>;
+		interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 36 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "sec", "temp";
+	};
+
 	pmu {
 		compatible = "arm,cortex-a9-pmu";
 		interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>,
@@ -317,7 +333,7 @@ pfc: pfc@e6050000 {
 
 	sh_fsi2: sound@ec230000 {
 		#sound-dai-cells = <1>;
-		compatible = "renesas,sh_fsi2";
+		compatible = "renesas,fsi2-sh73a0", "renesas,sh_fsi2";
 		reg = <0xec230000 0x400>;
 		interrupts = <0 146 0x4>;
 		status = "disabled";