Commit e4c57d0f authored by Michael Hennerich's avatar Michael Hennerich Committed by David S. Miller

netdev: smc91x: drop Blackfin cruft

Now that all Blackfin boards are using the board resources, we don't need
to keep the arch/board specific crap in the driver header.
Signed-off-by: default avatarMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: default avatarMike Frysinger <vapier@gentoo.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent aa1b1ff0
...@@ -83,34 +83,6 @@ static inline void SMC_outw(u16 val, void __iomem *ioaddr, int reg) ...@@ -83,34 +83,6 @@ static inline void SMC_outw(u16 val, void __iomem *ioaddr, int reg)
} }
} }
#elif defined(CONFIG_BLACKFIN)
#define SMC_IRQ_FLAGS IRQF_TRIGGER_HIGH
#define RPC_LSA_DEFAULT RPC_LED_100_10
#define RPC_LSB_DEFAULT RPC_LED_TX_RX
#define SMC_CAN_USE_8BIT 0
#define SMC_CAN_USE_16BIT 1
# if defined(CONFIG_BF561)
#define SMC_CAN_USE_32BIT 1
# else
#define SMC_CAN_USE_32BIT 0
# endif
#define SMC_IO_SHIFT 0
#define SMC_NOWAIT 1
#define SMC_USE_BFIN_DMA 0
#define SMC_inw(a, r) readw((a) + (r))
#define SMC_outw(v, a, r) writew(v, (a) + (r))
#define SMC_insw(a, r, p, l) readsw((a) + (r), p, l)
#define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l)
# if SMC_CAN_USE_32BIT
#define SMC_inl(a, r) readl((a) + (r))
#define SMC_outl(v, a, r) writel(v, (a) + (r))
#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l)
#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l)
# endif
#elif defined(CONFIG_REDWOOD_5) || defined(CONFIG_REDWOOD_6) #elif defined(CONFIG_REDWOOD_5) || defined(CONFIG_REDWOOD_6)
/* We can only do 16-bit reads and writes in the static memory space. */ /* We can only do 16-bit reads and writes in the static memory space. */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment