Commit e58bdaa8 authored by Sam Ravnborg's avatar Sam Ravnborg Committed by Ingo Molnar

x86, vmlinux.lds: unify first part of initdata

32-bit:

 - Move definition of __init_begin outside output_section
   because it covers more than one section
 - Move ALIGN() for end-of-section inside .smp_locks output section.
   Same effect but the intent is better documented that
   we need both start and end aligned.

64-bit:

 - Move ALIGN() outside output section in .init.setup
 - Deleted unused __smp_alt_* symbols

None of the above should result in any functional change.

[ Impact: refactor and unify linker script ]
Signed-off-by: default avatarSam Ravnborg <sam@ravnborg.org>
Cc: Tim Abbott <tabbott@MIT.EDU>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <1240991249-27117-9-git-send-email-sam@ravnborg.org>
Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
parent ff6f87e1
......@@ -231,6 +231,67 @@ SECTIONS
#endif /* CONFIG_X86_64 */
/* init_task */
. = ALIGN(THREAD_SIZE);
.data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
*(.data.init_task)
}
#ifdef CONFIG_X86_64
:data.init
#endif
/*
* smp_locks might be freed after init
* start/end must be page aligned
*/
. = ALIGN(PAGE_SIZE);
.smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
__smp_locks = .;
*(.smp_locks)
__smp_locks_end = .;
. = ALIGN(PAGE_SIZE);
}
/* Init code and data - will be freed after init */
. = ALIGN(PAGE_SIZE);
__init_begin = .; /* paired with __init_end */
.init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
_sinittext = .;
INIT_TEXT
_einittext = .;
}
.init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
INIT_DATA
}
. = ALIGN(16);
.init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
__setup_start = .;
*(.init.setup)
__setup_end = .;
}
.initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
__initcall_start = .;
INITCALLS
__initcall_end = .;
}
.con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
__con_initcall_start = .;
*(.con_initcall.init)
__con_initcall_end = .;
}
.x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) {
__x86_cpu_dev_start = .;
*(.x86_cpu_dev.init)
__x86_cpu_dev_end = .;
}
SECURITY_INIT
#ifdef CONFIG_X86_32
# include "vmlinux_32.lds.S"
#else
......
/* init_task */
. = ALIGN(THREAD_SIZE);
.data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
*(.data.init_task)
}
. = ALIGN(PAGE_SIZE);
.smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
/* might get freed after init */
__smp_locks = .;
*(.smp_locks)
__smp_locks_end = .;
}
/* will be freed after init
* Following ALIGN() is required to make sure no other data falls on the
* same page where __smp_alt_end is pointing as that page might be freed
* after boot. Always make sure that ALIGN() directive is present after
* the section which contains __smp_alt_end.
*/
. = ALIGN(PAGE_SIZE);
/* Init code and data - will be freed after init */
. = ALIGN(PAGE_SIZE);
.init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
__init_begin = .;
_sinittext = .;
INIT_TEXT
_einittext = .;
}
.init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
INIT_DATA
}
. = ALIGN(16);
.init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
__setup_start = .;
*(.init.setup)
__setup_end = .;
}
.initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
__initcall_start = .;
INITCALLS
__initcall_end = .;
}
.con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
__con_initcall_start = .;
*(.con_initcall.init)
__con_initcall_end = .;
}
.x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) {
__x86_cpu_dev_start = .;
*(.x86_cpu_dev.init)
__x86_cpu_dev_end = .;
}
SECURITY_INIT
. = ALIGN(4);
.altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) {
__alt_instructions = .;
......
/* init_task */
.data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
. = ALIGN(THREAD_SIZE);
*(.data.init_task)
} :data.init
.smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
/* might get freed after init */
. = ALIGN(PAGE_SIZE);
__smp_alt_begin = .;
__smp_locks = .;
*(.smp_locks)
__smp_locks_end = .;
. = ALIGN(PAGE_SIZE);
__smp_alt_end = .;
}
/* Init code and data */
. = ALIGN(PAGE_SIZE);
__init_begin = .; /* paired with __init_end */
.init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
_sinittext = .;
INIT_TEXT
_einittext = .;
}
.init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
__initdata_begin = .;
INIT_DATA
__initdata_end = .;
}
.init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
. = ALIGN(16);
__setup_start = .;
*(.init.setup)
__setup_end = .;
}
.initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
__initcall_start = .;
INITCALLS
__initcall_end = .;
}
.con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
__con_initcall_start = .;
*(.con_initcall.init)
__con_initcall_end = .;
}
.x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) {
__x86_cpu_dev_start = .;
*(.x86_cpu_dev.init)
__x86_cpu_dev_end = .;
}
SECURITY_INIT
. = ALIGN(8);
.parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) {
__parainstructions = .;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment