Merge tag 'for-v3.7' of git://git.infradead.org/battery-2.6

Pull battery updates from Anton Vorontsov:
 "1. New drivers:
     - Marvell 88pm860x charger and battery drivers;
     - Texas Instruments LP8788 charger driver;
  2. Two new power supply properties: whether a battery is authentic,
     and chargers' maximal currents and voltages;
  3. A lot of TI LP8727 Charger cleanups;
  4. New features for Charger Manager, mainly now we can disable
     specific regulators;
  5. Random fixes and cleanups for other drivers."

Fix up trivial conflicts in <linux/mfd/88pm860x.h>

* tag 'for-v3.7' of git://git.infradead.org/battery-2.6: (52 commits)
  pda_power: Remove ac_draw_failed goto and label
  charger-manager: Add support sysfs entry for charger
  charger-manager: Support limit of maximum possible
  charger-manager: Check fully charged state of battery periodically
  lp8727_charger: More pure cosmetic improvements
  lp8727_charger: Fix checkpatch warning
  lp8727_charger: Add description in the private data
  lp8727_charger: Fix a typo - chg_parm to chg_param
  lp8727_charger: Make some cosmetic changes in lp8727_delayed_func()
  lp8727_charger: Clean up lp8727_charger_changed()
  lp8727_charger: Return if the battery is discharging
  lp8727_charger: Make lp8727_charger_get_propery() simpler
  lp8727_charger: Make lp8727_ctrl_switch() inline
  lp8727_charger: Make lp8727_init_device() shorter
  lp8727_charger: Clean up lp8727_is_charger_attached()
  lp8727_charger: Use specific definition
  lp8727_charger: Clean up lp8727 definitions
  lp8727_charger: Use the definition rather than enum
  lp8727_charger: Fix code for getting battery temp
  lp8727_charger: Clear interrrupts at inital time
  ...

Documentation/power/power_supply_class.txt

@@ -81,6 +81,9 @@ This defines trickle and fast charges.  For batteries that
 are already charged or discharging, 'n/a' can be displayed (or
 'unknown', if the status is not known).
 
+AUTHENTIC - indicates the power supply (battery or charger) connected
+to the platform is authentic(1) or non authentic(0).
+
 HEALTH - represents health of the battery, values corresponds to
 POWER_SUPPLY_HEALTH_*, defined in battery.h.
 
@@ -113,8 +116,12 @@ be negative; there is no empty or full value.  It is only useful for
 relative, time-based measurements.
 
 CONSTANT_CHARGE_CURRENT - constant charge current programmed by charger.
+CONSTANT_CHARGE_CURRENT_MAX - maximum charge current supported by the
+power supply object.
 
 CONSTANT_CHARGE_VOLTAGE - constant charge voltage programmed by charger.
+CONSTANT_CHARGE_VOLTAGE_MAX - maximum charge voltage supported by the
+power supply object.
 
 ENERGY_FULL, ENERGY_EMPTY - same as above but for energy.
 

drivers/mfd/88pm860x-core.c

@@ -24,6 +24,7 @@
 #include <linux/mfd/core.h>
 #include <linux/mfd/88pm860x.h>
 #include <linux/regulator/machine.h>
+#include <linux/power/charger-manager.h>
 
 #define INT_STATUS_NUM			3
 
@@ -150,7 +151,8 @@ static struct resource battery_resources[] __devinitdata = {
 static struct resource charger_resources[] __devinitdata = {
 	{PM8607_IRQ_CHG,  PM8607_IRQ_CHG,  "charger detect",  IORESOURCE_IRQ,},
 	{PM8607_IRQ_CHG_DONE,  PM8607_IRQ_CHG_DONE,  "charging done",       IORESOURCE_IRQ,},
-	{PM8607_IRQ_CHG_FAULT, PM8607_IRQ_CHG_FAULT, "charging timeout",    IORESOURCE_IRQ,},
+	{PM8607_IRQ_CHG_FAIL,  PM8607_IRQ_CHG_FAIL,  "charging timeout",    IORESOURCE_IRQ,},
+	{PM8607_IRQ_CHG_FAULT, PM8607_IRQ_CHG_FAULT, "charging fault",	    IORESOURCE_IRQ,},
 	{PM8607_IRQ_GPADC1,    PM8607_IRQ_GPADC1,    "battery temperature", IORESOURCE_IRQ,},
 	{PM8607_IRQ_VBAT, PM8607_IRQ_VBAT, "battery voltage", IORESOURCE_IRQ,},
 	{PM8607_IRQ_VCHG, PM8607_IRQ_VCHG, "vchg voltage",    IORESOURCE_IRQ,},
@@ -318,10 +320,15 @@ static struct regulator_init_data preg_init_data = {
 	.consumer_supplies	= &preg_supply[0],
 };
 
+static struct charger_regulator chg_desc_regulator_data[] = {
+	{ .regulator_name = "preg", },
+};
+
 static struct mfd_cell power_devs[] = {
 	{"88pm860x-battery", -1,},
 	{"88pm860x-charger", -1,},
 	{"88pm860x-preg",    -1,},
+	{"charger-manager", -1,},
 };
 
 static struct mfd_cell rtc_devs[] = {
@@ -929,6 +936,19 @@ static void __devinit device_power_init(struct pm860x_chip *chip,
 			      NULL, chip->irq_base, NULL);
 	if (ret < 0)
 		dev_err(chip->dev, "Failed to add preg subdev\n");
+
+	if (pdata->chg_desc) {
+		pdata->chg_desc->charger_regulators =
+			&chg_desc_regulator_data[0];
+		pdata->chg_desc->num_charger_regulators	=
+			ARRAY_SIZE(chg_desc_regulator_data),
+		power_devs[3].platform_data = pdata->chg_desc;
+		power_devs[3].pdata_size = sizeof(*pdata->chg_desc);
+		ret = mfd_add_devices(chip->dev, 0, &power_devs[3], 1,
+				      NULL, chip->irq_base, NULL);
+		if (ret < 0)
+			dev_err(chip->dev, "Failed to add chg-manager subdev\n");
+	}
 }
 
 static void __devinit device_onkey_init(struct pm860x_chip *chip,

drivers/power/Kconfig

@@ -69,6 +69,12 @@ config TEST_POWER
 	help
 	  This driver is used for testing. It's safe to say M here.
 
+config BATTERY_88PM860X
+	tristate "Marvell 88PM860x battery driver"
+	depends on MFD_88PM860X
+	help
+	  Say Y here to enable battery monitor for Marvell 88PM860x chip.
+
 config BATTERY_DS2760
 	tristate "DS2760 battery driver (HP iPAQ & others)"
 	depends on W1 && W1_SLAVE_DS2760
@@ -174,7 +180,6 @@ config BATTERY_DA9030
 config BATTERY_DA9052
 	tristate "Dialog DA9052 Battery"
 	depends on PMIC_DA9052
-	depends on BROKEN
 	help
 	  Say Y here to enable support for batteries charger integrated into
 	  DA9052 PMIC.
@@ -210,6 +215,12 @@ config BATTERY_S3C_ADC
 	help
 	  Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery
 
+config CHARGER_88PM860X
+	tristate "Marvell 88PM860x Charger driver"
+	depends on MFD_88PM860X && BATTERY_88PM860X
+	help
+	  Say Y here to enable charger for Marvell 88PM860x chip.
+
 config CHARGER_PCF50633
 	tristate "NXP PCF50633 MBC"
 	depends on MFD_PCF50633
@@ -262,6 +273,13 @@ config CHARGER_LP8727
 	help
 	  Say Y here to enable support for LP8727 Charger Driver.
 
+config CHARGER_LP8788
+	tristate "TI LP8788 charger driver"
+	depends on MFD_LP8788
+	depends on LP8788_ADC
+	help
+	  Say Y to enable support for the LP8788 linear charger.
+
 config CHARGER_GPIO
 	tristate "GPIO charger"
 	depends on GPIOLIB

drivers/power/Makefile

@@ -15,6 +15,7 @@ obj-$(CONFIG_WM831X_POWER)	+= wm831x_power.o
 obj-$(CONFIG_WM8350_POWER)	+= wm8350_power.o
 obj-$(CONFIG_TEST_POWER)	+= test_power.o
 
+obj-$(CONFIG_BATTERY_88PM860X)	+= 88pm860x_battery.o
 obj-$(CONFIG_BATTERY_DS2760)	+= ds2760_battery.o
 obj-$(CONFIG_BATTERY_DS2780)	+= ds2780_battery.o
 obj-$(CONFIG_BATTERY_DS2781)	+= ds2781_battery.o
@@ -32,6 +33,7 @@ obj-$(CONFIG_BATTERY_MAX17040)	+= max17040_battery.o
 obj-$(CONFIG_BATTERY_MAX17042)	+= max17042_battery.o
 obj-$(CONFIG_BATTERY_Z2)	+= z2_battery.o
 obj-$(CONFIG_BATTERY_S3C_ADC)	+= s3c_adc_battery.o
+obj-$(CONFIG_CHARGER_88PM860X)	+= 88pm860x_charger.o
 obj-$(CONFIG_CHARGER_PCF50633)	+= pcf50633-charger.o
 obj-$(CONFIG_BATTERY_JZ4740)	+= jz4740-battery.o
 obj-$(CONFIG_BATTERY_INTEL_MID)	+= intel_mid_battery.o
@@ -40,6 +42,7 @@ obj-$(CONFIG_CHARGER_ISP1704)	+= isp1704_charger.o
 obj-$(CONFIG_CHARGER_MAX8903)	+= max8903_charger.o
 obj-$(CONFIG_CHARGER_TWL4030)	+= twl4030_charger.o
 obj-$(CONFIG_CHARGER_LP8727)	+= lp8727_charger.o
+obj-$(CONFIG_CHARGER_LP8788)	+= lp8788-charger.o
 obj-$(CONFIG_CHARGER_GPIO)	+= gpio-charger.o
 obj-$(CONFIG_CHARGER_MANAGER)	+= charger-manager.o
 obj-$(CONFIG_CHARGER_MAX8997)	+= max8997_charger.o

drivers/power/ab8500_btemp.c

@@ -1014,6 +1014,7 @@ static int __devinit ab8500_btemp_probe(struct platform_device *pdev)
 		create_singlethread_workqueue("ab8500_btemp_wq");
 	if (di->btemp_wq == NULL) {
 		dev_err(di->dev, "failed to create work queue\n");
+		ret = -ENOMEM;
 		goto free_device_info;
 	}
 

drivers/power/ab8500_charger.c

@@ -2614,6 +2614,7 @@ static int __devinit ab8500_charger_probe(struct platform_device *pdev)
 		create_singlethread_workqueue("ab8500_charger_wq");
 	if (di->charger_wq == NULL) {
 		dev_err(di->dev, "failed to create work queue\n");
+		ret = -ENOMEM;
 		goto free_device_info;
 	}
 

drivers/power/ab8500_fg.c

@@ -2506,6 +2506,7 @@ static int __devinit ab8500_fg_probe(struct platform_device *pdev)
 	di->fg_wq = create_singlethread_workqueue("ab8500_fg_wq");
 	if (di->fg_wq == NULL) {
 		dev_err(di->dev, "failed to create work queue\n");
+		ret = -ENOMEM;
 		goto free_device_info;
 	}
 

drivers/power/bq27x00_battery.c

@@ -814,7 +814,8 @@ static int bq27x00_battery_probe(struct i2c_client *client,
 	di->bat.name = name;
 	di->bus.read = &bq27x00_read_i2c;
 
-	if (bq27x00_powersupply_init(di))
+	retval = bq27x00_powersupply_init(di);
+	if (retval)
 		goto batt_failed_3;
 
 	i2c_set_clientdata(client, di);

drivers/power/da9030_battery.c

@@ -187,8 +187,8 @@ static const struct file_operations bat_debug_fops = {
 
 static struct dentry *da9030_bat_create_debugfs(struct da9030_charger *charger)
 {
-	charger->debug_file = debugfs_create_file("charger", 0666, 0, charger,
-						 &bat_debug_fops);
+	charger->debug_file = debugfs_create_file("charger", 0666, NULL,
+						  charger, &bat_debug_fops);
 	return charger->debug_file;
 }
 

drivers/power/da9052-battery.c

@@ -327,7 +327,7 @@ static int da9052_bat_interpolate(int vbat_lower, int  vbat_upper,
 	return tmp;
 }
 
-unsigned char da9052_determine_vc_tbl_index(unsigned char adc_temp)
+static unsigned char da9052_determine_vc_tbl_index(unsigned char adc_temp)
 {
 	int i;
 
@@ -345,6 +345,13 @@ unsigned char da9052_determine_vc_tbl_index(unsigned char adc_temp)
 		     && (adc_temp <= vc_tbl_ref[i]))
 				return i + 1;
 	}
+	/*
+	 * For some reason authors of the driver didn't presume that we can
+	 * end up here. It might be OK, but might be not, no one knows for
+	 * sure. Go check your battery, is it on fire?
+	 */
+	WARN_ON(1);
+	return 0;
 }
 
 static int da9052_bat_read_capacity(struct da9052_battery *bat, int *capacity)
@@ -616,7 +623,7 @@ static s32 __devinit da9052_bat_probe(struct platform_device *pdev)
 	return 0;
 
 err:
-	for (; i >= 0; i--) {
+	while (--i >= 0) {
 		irq = platform_get_irq_byname(pdev, da9052_bat_irqs[i]);
 		free_irq(bat->da9052->irq_base + irq, bat);
 	}

drivers/power/ds2781_battery.c

@@ -755,11 +755,9 @@ static int __devinit ds2781_battery_probe(struct platform_device *pdev)
 	int ret = 0;
 	struct ds2781_device_info *dev_info;
 
-	dev_info = kzalloc(sizeof(*dev_info), GFP_KERNEL);
-	if (!dev_info) {
-		ret = -ENOMEM;
-		goto fail;
-	}
+	dev_info = devm_kzalloc(&pdev->dev, sizeof(*dev_info), GFP_KERNEL);
+	if (!dev_info)
+		return -ENOMEM;
 
 	platform_set_drvdata(pdev, dev_info);
 
@@ -774,7 +772,7 @@ static int __devinit ds2781_battery_probe(struct platform_device *pdev)
 	ret = power_supply_register(&pdev->dev, &dev_info->bat);
 	if (ret) {
 		dev_err(dev_info->dev, "failed to register battery\n");
-		goto fail_free_info;
+		goto fail;
 	}
 
 	ret = sysfs_create_group(&dev_info->bat.dev->kobj, &ds2781_attr_group);
@@ -808,8 +806,6 @@ static int __devinit ds2781_battery_probe(struct platform_device *pdev)
 	sysfs_remove_group(&dev_info->bat.dev->kobj, &ds2781_attr_group);
 fail_unregister:
 	power_supply_unregister(&dev_info->bat);
-fail_free_info:
-	kfree(dev_info);
 fail:
 	return ret;
 }
@@ -823,7 +819,6 @@ static int __devexit ds2781_battery_remove(struct platform_device *pdev)
 
 	power_supply_unregister(&dev_info->bat);
 
-	kfree(dev_info);
 	return 0;
 }
 
@@ -834,20 +829,7 @@ static struct platform_driver ds2781_battery_driver = {
 	.probe	  = ds2781_battery_probe,
 	.remove   = __devexit_p(ds2781_battery_remove),
 };
-
-static int __init ds2781_battery_init(void)
-{
-	return platform_driver_register(&ds2781_battery_driver);
-}
-
-static void __exit ds2781_battery_exit(void)
-{
-	platform_driver_unregister(&ds2781_battery_driver);
-}
-
-module_init(ds2781_battery_init);
-module_exit(ds2781_battery_exit);
-
+module_platform_driver(ds2781_battery_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Renata Sayakhova <renata@oktetlabs.ru>");

drivers/power/pda_power.c

@@ -281,6 +281,12 @@ static int pda_power_probe(struct platform_device *pdev)
 			goto init_failed;
 	}
 
+	ac_draw = regulator_get(dev, "ac_draw");
+	if (IS_ERR(ac_draw)) {
+		dev_dbg(dev, "couldn't get ac_draw regulator\n");
+		ac_draw = NULL;
+	}
+
 	update_status();
 	update_charger();
 
@@ -309,13 +315,6 @@ static int pda_power_probe(struct platform_device *pdev)
 		pda_psy_usb.num_supplicants = pdata->num_supplicants;
 	}
 
-	ac_draw = regulator_get(dev, "ac_draw");
-	if (IS_ERR(ac_draw)) {
-		dev_dbg(dev, "couldn't get ac_draw regulator\n");
-		ac_draw = NULL;
-		ret = PTR_ERR(ac_draw);
-	}
-
 #ifdef CONFIG_USB_OTG_UTILS
 	transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
 	if (!IS_ERR_OR_NULL(transceiver)) {

drivers/power/power_supply_sysfs.c

@@ -138,6 +138,7 @@ static struct device_attribute power_supply_attrs[] = {
 	POWER_SUPPLY_ATTR(health),
 	POWER_SUPPLY_ATTR(present),
 	POWER_SUPPLY_ATTR(online),
+	POWER_SUPPLY_ATTR(authentic),
 	POWER_SUPPLY_ATTR(technology),
 	POWER_SUPPLY_ATTR(cycle_count),
 	POWER_SUPPLY_ATTR(voltage_max),
@@ -160,7 +161,9 @@ static struct device_attribute power_supply_attrs[] = {
 	POWER_SUPPLY_ATTR(charge_avg),
 	POWER_SUPPLY_ATTR(charge_counter),
 	POWER_SUPPLY_ATTR(constant_charge_current),
+	POWER_SUPPLY_ATTR(constant_charge_current_max),
 	POWER_SUPPLY_ATTR(constant_charge_voltage),
+	POWER_SUPPLY_ATTR(constant_charge_voltage_max),
 	POWER_SUPPLY_ATTR(energy_full_design),
 	POWER_SUPPLY_ATTR(energy_empty_design),
 	POWER_SUPPLY_ATTR(energy_full),

drivers/power/sbs-battery.c

@@ -759,6 +759,16 @@ static int __devinit sbs_probe(struct i2c_client *client,
 	chip->irq = irq;
 
 skip_gpio:
+	/*
+	 * Before we register, we need to make sure we can actually talk
+	 * to the battery.
+	 */
+	rc = sbs_read_word_data(client, sbs_data[REG_STATUS].addr);
+	if (rc < 0) {
+		dev_err(&client->dev, "%s: Failed to get device status\n",
+			__func__);
+		goto exit_psupply;
+	}
 
 	rc = power_supply_register(&client->dev, &chip->power_supply);
 	if (rc) {

drivers/power/smb347-charger.c

@@ -80,6 +80,7 @@
 #define CFG_FAULT_IRQ_DCIN_UV			BIT(2)
 #define CFG_STATUS_IRQ				0x0d
 #define CFG_STATUS_IRQ_TERMINATION_OR_TAPER	BIT(4)
+#define CFG_STATUS_IRQ_CHARGE_TIMEOUT		BIT(7)
 #define CFG_ADDRESS				0x0e
 
 /* Command registers */
@@ -96,6 +97,9 @@
 #define IRQSTAT_C_TERMINATION_STAT		BIT(0)
 #define IRQSTAT_C_TERMINATION_IRQ		BIT(1)
 #define IRQSTAT_C_TAPER_IRQ			BIT(3)
+#define IRQSTAT_D				0x38
+#define IRQSTAT_D_CHARGE_TIMEOUT_STAT		BIT(2)
+#define IRQSTAT_D_CHARGE_TIMEOUT_IRQ		BIT(3)
 #define IRQSTAT_E				0x39
 #define IRQSTAT_E_USBIN_UV_STAT			BIT(0)
 #define IRQSTAT_E_USBIN_UV_IRQ			BIT(1)
@@ -109,8 +113,10 @@
 #define STAT_B					0x3c
 #define STAT_C					0x3d
 #define STAT_C_CHG_ENABLED			BIT(0)
+#define STAT_C_HOLDOFF_STAT			BIT(3)
 #define STAT_C_CHG_MASK				0x06
 #define STAT_C_CHG_SHIFT			1
+#define STAT_C_CHG_TERM				BIT(5)
 #define STAT_C_CHARGER_ERROR			BIT(6)
 #define STAT_E					0x3f
 
@@ -701,7 +707,7 @@ static int smb347_hw_init(struct smb347_charger *smb)
 static irqreturn_t smb347_interrupt(int irq, void *data)
 {
 	struct smb347_charger *smb = data;
-	unsigned int stat_c, irqstat_e, irqstat_c;
+	unsigned int stat_c, irqstat_c, irqstat_d, irqstat_e;
 	bool handled = false;
 	int ret;
 
@@ -717,6 +723,12 @@ static irqreturn_t smb347_interrupt(int irq, void *data)
 		return IRQ_NONE;
 	}
 
+	ret = regmap_read(smb->regmap, IRQSTAT_D, &irqstat_d);
+	if (ret < 0) {
+		dev_warn(smb->dev, "reading IRQSTAT_D failed\n");
+		return IRQ_NONE;
+	}
+
 	ret = regmap_read(smb->regmap, IRQSTAT_E, &irqstat_e);
 	if (ret < 0) {
 		dev_warn(smb->dev, "reading IRQSTAT_E failed\n");
@@ -724,13 +736,11 @@ static irqreturn_t smb347_interrupt(int irq, void *data)
 	}
 
 	/*
-	 * If we get charger error we report the error back to user and
-	 * disable charging.
+	 * If we get charger error we report the error back to user.
+	 * If the error is recovered charging will resume again.
 	 */
 	if (stat_c & STAT_C_CHARGER_ERROR) {
-		dev_err(smb->dev, "error in charger, disabling charging\n");
-
-		smb347_charging_disable(smb);
+		dev_err(smb->dev, "charging stopped due to charger error\n");
 		power_supply_changed(&smb->battery);
 		handled = true;
 	}
@@ -743,6 +753,20 @@ static irqreturn_t smb347_interrupt(int irq, void *data)
 	if (irqstat_c & (IRQSTAT_C_TERMINATION_IRQ | IRQSTAT_C_TAPER_IRQ)) {
 		if (irqstat_c & IRQSTAT_C_TERMINATION_STAT)
 			power_supply_changed(&smb->battery);
+		dev_dbg(smb->dev, "going to HW maintenance mode\n");
+		handled = true;
+	}
+
+	/*
+	 * If we got a charger timeout INT that means the charge
+	 * full is not detected with in charge timeout value.
+	 */
+	if (irqstat_d & IRQSTAT_D_CHARGE_TIMEOUT_IRQ) {
+		dev_dbg(smb->dev, "total Charge Timeout INT received\n");
+
+		if (irqstat_d & IRQSTAT_D_CHARGE_TIMEOUT_STAT)
+			dev_warn(smb->dev, "charging stopped due to timeout\n");
+		power_supply_changed(&smb->battery);
 		handled = true;
 	}
 
@@ -776,6 +800,7 @@ static int smb347_irq_set(struct smb347_charger *smb, bool enable)
 	 * Enable/disable interrupts for:
 	 *	- under voltage
 	 *	- termination current reached
+	 *	- charger timeout
 	 *	- charger error
 	 */
 	ret = regmap_update_bits(smb->regmap, CFG_FAULT_IRQ, 0xff,
@@ -784,7 +809,8 @@ static int smb347_irq_set(struct smb347_charger *smb, bool enable)
 		goto fail;
 
 	ret = regmap_update_bits(smb->regmap, CFG_STATUS_IRQ, 0xff,
-			enable ? CFG_STATUS_IRQ_TERMINATION_OR_TAPER : 0);
+			enable ? (CFG_STATUS_IRQ_TERMINATION_OR_TAPER |
+					CFG_STATUS_IRQ_CHARGE_TIMEOUT) : 0);
 	if (ret < 0)
 		goto fail;
 
@@ -988,6 +1014,51 @@ static enum power_supply_property smb347_usb_properties[] = {
 	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
 };
 
+static int smb347_get_charging_status(struct smb347_charger *smb)
+{
+	int ret, status;
+	unsigned int val;
+
+	if (!smb347_is_ps_online(smb))
+		return POWER_SUPPLY_STATUS_DISCHARGING;
+
+	ret = regmap_read(smb->regmap, STAT_C, &val);
+	if (ret < 0)
+		return ret;
+
+	if ((val & STAT_C_CHARGER_ERROR) ||
+			(val & STAT_C_HOLDOFF_STAT)) {
+		/*
+		 * set to NOT CHARGING upon charger error
+		 * or charging has stopped.
+		 */
+		status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+	} else {
+		if ((val & STAT_C_CHG_MASK) >> STAT_C_CHG_SHIFT) {
+			/*
+			 * set to charging if battery is in pre-charge,
+			 * fast charge or taper charging mode.
+			 */
+			status = POWER_SUPPLY_STATUS_CHARGING;
+		} else if (val & STAT_C_CHG_TERM) {
+			/*
+			 * set the status to FULL if battery is not in pre
+			 * charge, fast charge or taper charging mode AND
+			 * charging is terminated at least once.
+			 */
+			status = POWER_SUPPLY_STATUS_FULL;
+		} else {
+			/*
+			 * in this case no charger error or termination
+			 * occured but charging is not in progress!!!
+			 */
+			status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		}
+	}
+
+	return status;
+}
+
 static int smb347_battery_get_property(struct power_supply *psy,
 				       enum power_supply_property prop,
 				       union power_supply_propval *val)
@@ -1003,14 +1074,10 @@ static int smb347_battery_get_property(struct power_supply *psy,
 
 	switch (prop) {
 	case POWER_SUPPLY_PROP_STATUS:
-		if (!smb347_is_ps_online(smb)) {
-			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
-			break;
-		}
-		if (smb347_charging_status(smb))
-			val->intval = POWER_SUPPLY_STATUS_CHARGING;
-		else
-			val->intval = POWER_SUPPLY_STATUS_FULL;
+		ret = smb347_get_charging_status(smb);
+		if (ret < 0)
+			return ret;
+		val->intval = ret;
 		break;
 
 	case POWER_SUPPLY_PROP_CHARGE_TYPE:

drivers/power/twl4030_charger.c

@@ -41,16 +41,16 @@
 #define TWL4030_STS_VBUS	BIT(7)
 #define TWL4030_STS_USB_ID	BIT(2)
 #define TWL4030_BBCHEN		BIT(4)
-#define TWL4030_BBSEL_MASK	0b1100
-#define TWL4030_BBSEL_2V5	0b0000
-#define TWL4030_BBSEL_3V0	0b0100
-#define TWL4030_BBSEL_3V1	0b1000
-#define TWL4030_BBSEL_3V2	0b1100
-#define TWL4030_BBISEL_MASK	0b11
-#define TWL4030_BBISEL_25uA	0b00
-#define TWL4030_BBISEL_150uA	0b01
-#define TWL4030_BBISEL_500uA	0b10
-#define TWL4030_BBISEL_1000uA	0b11
+#define TWL4030_BBSEL_MASK	0x0c
+#define TWL4030_BBSEL_2V5	0x00
+#define TWL4030_BBSEL_3V0	0x04
+#define TWL4030_BBSEL_3V1	0x08
+#define TWL4030_BBSEL_3V2	0x0c
+#define TWL4030_BBISEL_MASK	0x03
+#define TWL4030_BBISEL_25uA	0x00
+#define TWL4030_BBISEL_150uA	0x01
+#define TWL4030_BBISEL_500uA	0x02
+#define TWL4030_BBISEL_1000uA	0x03
 
 /* BCI interrupts */
 #define TWL4030_WOVF		BIT(0) /* Watchdog overflow */
@@ -534,7 +534,8 @@ static int __init twl4030_bci_probe(struct platform_device *pdev)
 	}
 
 	ret = request_threaded_irq(bci->irq_chg, NULL,
-			twl4030_charger_interrupt, 0, pdev->name, bci);
+			twl4030_charger_interrupt, IRQF_ONESHOT, pdev->name,
+			bci);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "could not request irq %d, status %d\n",
 			bci->irq_chg, ret);
@@ -542,7 +543,7 @@ static int __init twl4030_bci_probe(struct platform_device *pdev)
 	}
 
 	ret = request_threaded_irq(bci->irq_bci, NULL,
-			twl4030_bci_interrupt, 0, pdev->name, bci);
+			twl4030_bci_interrupt, IRQF_ONESHOT, pdev->name, bci);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "could not request irq %d, status %d\n",
 			bci->irq_bci, ret);

drivers/power/wm97xx_battery.c

@@ -212,8 +212,10 @@ static int __devinit wm97xx_bat_probe(struct platform_device *dev)
 		props++;	/* POWER_SUPPLY_PROP_VOLTAGE_MIN */
 
 	prop = kzalloc(props * sizeof(*prop), GFP_KERNEL);
-	if (!prop)
+	if (!prop) {
+		ret = -ENOMEM;
 		goto err3;
+	}
 
 	prop[i++] = POWER_SUPPLY_PROP_PRESENT;
 	if (pdata->charge_gpio >= 0)

include/linux/mfd/88pm860x.h

@@ -39,6 +39,21 @@ enum {
 #define PM8606_DCM_BOOST		(0x00)
 #define PM8606_PWM			(0x01)
 
+#define PM8607_MISC2			(0x42)
+
+/* Power Up Log Register */
+#define PM8607_POWER_UP_LOG		(0x3F)
+
+/* Charger Control Registers */
+#define PM8607_CCNT			(0x47)
+#define PM8607_CHG_CTRL1		(0x48)
+#define PM8607_CHG_CTRL2		(0x49)
+#define PM8607_CHG_CTRL3		(0x4A)
+#define PM8607_CHG_CTRL4		(0x4B)
+#define PM8607_CHG_CTRL5		(0x4C)
+#define PM8607_CHG_CTRL6		(0x4D)
+#define PM8607_CHG_CTRL7		(0x4E)
+
 /* Backlight Registers */
 #define PM8606_WLED1A			(0x02)
 #define PM8606_WLED1B			(0x03)
@@ -189,6 +204,71 @@ enum {
 #define PM8607_PD_PREBIAS		(0x56)	/* prebias time */
 #define PM8607_GPADC_MISC1		(0x57)
 
+/* bit definitions of  MEAS_EN1*/
+#define PM8607_MEAS_EN1_VBAT		(1 << 0)
+#define PM8607_MEAS_EN1_VCHG		(1 << 1)
+#define PM8607_MEAS_EN1_VSYS		(1 << 2)
+#define PM8607_MEAS_EN1_TINT		(1 << 3)
+#define PM8607_MEAS_EN1_RFTMP		(1 << 4)
+#define PM8607_MEAS_EN1_TBAT		(1 << 5)
+#define PM8607_MEAS_EN1_GPADC2		(1 << 6)
+#define PM8607_MEAS_EN1_GPADC3		(1 << 7)
+
+/* Battery Monitor Registers */
+#define PM8607_GP_BIAS2			(0x5A)
+#define PM8607_VBAT_LOWTH		(0x5B)
+#define PM8607_VCHG_LOWTH		(0x5C)
+#define PM8607_VSYS_LOWTH		(0x5D)
+#define PM8607_TINT_LOWTH		(0x5E)
+#define PM8607_GPADC0_LOWTH		(0x5F)
+#define PM8607_GPADC1_LOWTH		(0x60)
+#define PM8607_GPADC2_LOWTH		(0x61)
+#define PM8607_GPADC3_LOWTH		(0x62)
+#define PM8607_VBAT_HIGHTH		(0x63)
+#define PM8607_VCHG_HIGHTH		(0x64)
+#define PM8607_VSYS_HIGHTH		(0x65)
+#define PM8607_TINT_HIGHTH		(0x66)
+#define PM8607_GPADC0_HIGHTH		(0x67)
+#define PM8607_GPADC1_HIGHTH		(0x68)
+#define PM8607_GPADC2_HIGHTH		(0x69)
+#define PM8607_GPADC3_HIGHTH		(0x6A)
+#define PM8607_IBAT_MEAS1		(0x6B)
+#define PM8607_IBAT_MEAS2		(0x6C)
+#define PM8607_VBAT_MEAS1		(0x6D)
+#define PM8607_VBAT_MEAS2		(0x6E)
+#define PM8607_VCHG_MEAS1		(0x6F)
+#define PM8607_VCHG_MEAS2		(0x70)
+#define PM8607_VSYS_MEAS1		(0x71)
+#define PM8607_VSYS_MEAS2		(0x72)
+#define PM8607_TINT_MEAS1		(0x73)
+#define PM8607_TINT_MEAS2		(0x74)
+#define PM8607_GPADC0_MEAS1		(0x75)
+#define PM8607_GPADC0_MEAS2		(0x76)
+#define PM8607_GPADC1_MEAS1		(0x77)
+#define PM8607_GPADC1_MEAS2		(0x78)
+#define PM8607_GPADC2_MEAS1		(0x79)
+#define PM8607_GPADC2_MEAS2		(0x7A)
+#define PM8607_GPADC3_MEAS1		(0x7B)
+#define PM8607_GPADC3_MEAS2		(0x7C)
+#define PM8607_CCNT_MEAS1		(0x95)
+#define PM8607_CCNT_MEAS2		(0x96)
+#define PM8607_VBAT_AVG			(0x97)
+#define PM8607_VCHG_AVG			(0x98)
+#define PM8607_VSYS_AVG			(0x99)
+#define PM8607_VBAT_MIN			(0x9A)
+#define PM8607_VCHG_MIN			(0x9B)
+#define PM8607_VSYS_MIN			(0x9C)
+#define PM8607_VBAT_MAX			(0x9D)
+#define PM8607_VCHG_MAX			(0x9E)
+#define PM8607_VSYS_MAX			(0x9F)
+
+#define PM8607_GPADC_MISC2		(0x59)
+#define PM8607_GPADC0_GP_BIAS_A0	(1 << 0)
+#define PM8607_GPADC1_GP_BIAS_A1	(1 << 1)
+#define PM8607_GPADC2_GP_BIAS_A2	(1 << 2)
+#define PM8607_GPADC3_GP_BIAS_A3	(1 << 3)
+#define PM8607_GPADC2_GP_BIAS_OUT2	(1 << 6)
+
 /* RTC Control Registers */
 #define PM8607_RTC1			(0xA0)
 #define PM8607_RTC_COUNTER1		(0xA1)
@@ -350,7 +430,8 @@ struct pm860x_touch_pdata {
 };
 
 struct pm860x_power_pdata {
-	unsigned	fast_charge;	/* charge current */
+	int		max_capacity;
+	int		resistor;
 };
 
 struct pm860x_platform_data {
@@ -375,6 +456,7 @@ struct pm860x_platform_data {
 	struct regulator_init_data	*ldo12;
 	struct regulator_init_data	*ldo_vibrator;
 	struct regulator_init_data	*ldo14;
+	struct charger_desc		*chg_desc;
 
 	int 		companion_addr;	/* I2C address of companion chip */
 	int		i2c_port;	/* Controlled by GI2C or PI2C */

include/linux/platform_data/lp8727.h

@@ -13,26 +13,26 @@
 #define _LP8727_H
 
 enum lp8727_eoc_level {
-	EOC_5P,
-	EOC_10P,
-	EOC_16P,
-	EOC_20P,
-	EOC_25P,
-	EOC_33P,
-	EOC_50P,
+	LP8727_EOC_5P,
+	LP8727_EOC_10P,
+	LP8727_EOC_16P,
+	LP8727_EOC_20P,
+	LP8727_EOC_25P,
+	LP8727_EOC_33P,
+	LP8727_EOC_50P,
 };
 
 enum lp8727_ichg {
-	ICHG_90mA,
-	ICHG_100mA,
-	ICHG_400mA,
-	ICHG_450mA,
-	ICHG_500mA,
-	ICHG_600mA,
-	ICHG_700mA,
-	ICHG_800mA,
-	ICHG_900mA,
-	ICHG_1000mA,
+	LP8727_ICHG_90mA,
+	LP8727_ICHG_100mA,
+	LP8727_ICHG_400mA,
+	LP8727_ICHG_450mA,
+	LP8727_ICHG_500mA,
+	LP8727_ICHG_600mA,
+	LP8727_ICHG_700mA,
+	LP8727_ICHG_800mA,
+	LP8727_ICHG_900mA,
+	LP8727_ICHG_1000mA,
 };
 
 /**
@@ -51,15 +51,18 @@ struct lp8727_chg_param {
  * @get_batt_level    : get battery voltage (mV)
  * @get_batt_capacity : get battery capacity (%)
  * @get_batt_temp     : get battery temperature
- * @ac, @usb : charging parameters each charger type
+ * @ac                : charging parameters for AC type charger
+ * @usb               : charging parameters for USB type charger
+ * @debounce_msec     : interrupt debounce time
  */
 struct lp8727_platform_data {
 	u8 (*get_batt_present)(void);
 	u16 (*get_batt_level)(void);
 	u8 (*get_batt_capacity)(void);
 	u8 (*get_batt_temp)(void);
-	struct lp8727_chg_param ac;
-	struct lp8727_chg_param usb;
+	struct lp8727_chg_param *ac;
+	struct lp8727_chg_param *usb;
+	unsigned int debounce_msec;
 };
 
 #endif

include/linux/power/charger-manager.h

@@ -109,24 +109,43 @@ struct charger_cable {
  * struct charger_regulator
  * @regulator_name: the name of regulator for using charger.
  * @consumer: the regulator consumer for the charger.
+ * @externally_control:
+ *	Set if the charger-manager cannot control charger,
+ *	the charger will be maintained with disabled state.
  * @cables:
  *	the array of charger cables to enable/disable charger
  *	and set current limit according to constratint data of
  *	struct charger_cable if only charger cable included
  *	in the array of charger cables is attached/detached.
  * @num_cables: the number of charger cables.
+ * @attr_g: Attribute group for the charger(regulator)
+ * @attr_name: "name" sysfs entry
+ * @attr_state: "state" sysfs entry
+ * @attr_externally_control: "externally_control" sysfs entry
+ * @attrs: Arrays pointing to attr_name/state/externally_control for attr_g
  */
 struct charger_regulator {
 	/* The name of regulator for charging */
 	const char *regulator_name;
 	struct regulator *consumer;
 
+	/* charger never on when system is on */
+	int externally_control;
+
 	/*
 	 * Store constraint information related to current limit,
 	 * each cable have different condition for charging.
 	 */
 	struct charger_cable *cables;
 	int num_cables;
+
+	struct attribute_group attr_g;
+	struct device_attribute attr_name;
+	struct device_attribute attr_state;
+	struct device_attribute attr_externally_control;
+	struct attribute *attrs[4];
+
+	struct charger_manager *cm;
 };
 
 /**
@@ -140,7 +159,11 @@ struct charger_regulator {
  *	If it has dropped more than fullbatt_vchkdrop_uV after
  *	fullbatt_vchkdrop_ms, CM will restart charging.
  * @fullbatt_uV: voltage in microvolt
- *	If it is not being charged and VBATT >= fullbatt_uV,
+ *	If VBATT >= fullbatt_uV, it is assumed to be full.
+ * @fullbatt_soc: state of Charge in %
+ *	If state of Charge >= fullbatt_soc, it is assumed to be full.
+ * @fullbatt_full_capacity: full capacity measure
+ *	If full capacity of battery >= fullbatt_full_capacity,
  *	it is assumed to be full.
  * @polling_interval_ms: interval in millisecond at which
  *	charger manager will monitor battery health
@@ -148,7 +171,7 @@ struct charger_regulator {
  *	Specify where information for existance of battery can be obtained
  * @psy_charger_stat: the names of power-supply for chargers
  * @num_charger_regulator: the number of entries in charger_regulators
- * @charger_regulators: array of regulator_bulk_data for chargers
+ * @charger_regulators: array of charger regulators
  * @psy_fuel_gauge: the name of power-supply for fuel gauge
  * @temperature_out_of_range:
  *	Determine whether the status is overheat or cold or normal.
@@ -158,6 +181,13 @@ struct charger_regulator {
  * @measure_battery_temp:
  *	true: measure battery temperature
  *	false: measure ambient temperature
+ * @charging_max_duration_ms: Maximum possible duration for charging
+ *	If whole charging duration exceed 'charging_max_duration_ms',
+ *	cm stop charging.
+ * @discharging_max_duration_ms:
+ *	Maximum possible duration for discharging with charger cable
+ *	after full-batt. If discharging duration exceed 'discharging
+ *	max_duration_ms', cm start charging.
  */
 struct charger_desc {
 	char *psy_name;
@@ -168,6 +198,8 @@ struct charger_desc {
 	unsigned int fullbatt_vchkdrop_ms;
 	unsigned int fullbatt_vchkdrop_uV;
 	unsigned int fullbatt_uV;
+	unsigned int fullbatt_soc;
+	unsigned int fullbatt_full_capacity;
 
 	enum data_source battery_present;
 
@@ -180,6 +212,9 @@ struct charger_desc {
 
 	int (*temperature_out_of_range)(int *mC);
 	bool measure_battery_temp;
+
+	u64 charging_max_duration_ms;
+	u64 discharging_max_duration_ms;
 };
 
 #define PSY_NAME_MAX	30
@@ -194,8 +229,6 @@ struct charger_desc {
  * @charger_enabled: the state of charger
  * @fullbatt_vchk_jiffies_at:
  *	jiffies at the time full battery check will occur.
- * @fullbatt_vchk_uV: voltage in microvolt
- *	criteria for full battery
  * @fullbatt_vchk_work: work queue for full battery check
  * @emergency_stop:
  *	When setting true, stop charging
@@ -206,6 +239,8 @@ struct charger_desc {
  *	saved status of external power before entering suspend-to-RAM
  * @status_save_batt:
  *	saved status of battery before entering suspend-to-RAM
+ * @charging_start_time: saved start time of enabling charging
+ * @charging_end_time: saved end time of disabling charging
  */
 struct charger_manager {
 	struct list_head entry;
@@ -218,7 +253,6 @@ struct charger_manager {
 	bool charger_enabled;
 
 	unsigned long fullbatt_vchk_jiffies_at;
-	unsigned int fullbatt_vchk_uV;
 	struct delayed_work fullbatt_vchk_work;
 
 	int emergency_stop;
@@ -229,6 +263,9 @@ struct charger_manager {
 
 	bool status_save_ext_pwr_inserted;
 	bool status_save_batt;
+
+	u64 charging_start_time;
+	u64 charging_end_time;
 };
 
 #ifdef CONFIG_CHARGER_MANAGER

include/linux/power_supply.h

@@ -88,6 +88,7 @@ enum power_supply_property {
 	POWER_SUPPLY_PROP_HEALTH,
 	POWER_SUPPLY_PROP_PRESENT,
 	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_AUTHENTIC,
 	POWER_SUPPLY_PROP_TECHNOLOGY,
 	POWER_SUPPLY_PROP_CYCLE_COUNT,
 	POWER_SUPPLY_PROP_VOLTAGE_MAX,
@@ -110,7 +111,9 @@ enum power_supply_property {
 	POWER_SUPPLY_PROP_CHARGE_AVG,
 	POWER_SUPPLY_PROP_CHARGE_COUNTER,
 	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
 	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
 	POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN,
 	POWER_SUPPLY_PROP_ENERGY_EMPTY_DESIGN,
 	POWER_SUPPLY_PROP_ENERGY_FULL,
@@ -248,6 +251,7 @@ static inline bool power_supply_is_amp_property(enum power_supply_property psp)
 	case POWER_SUPPLY_PROP_CHARGE_AVG:
 	case POWER_SUPPLY_PROP_CHARGE_COUNTER:
 	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
 	case POWER_SUPPLY_PROP_CURRENT_MAX:
 	case POWER_SUPPLY_PROP_CURRENT_NOW:
 	case POWER_SUPPLY_PROP_CURRENT_AVG:
@@ -276,6 +280,7 @@ static inline bool power_supply_is_watt_property(enum power_supply_property psp)
 	case POWER_SUPPLY_PROP_VOLTAGE_AVG:
 	case POWER_SUPPLY_PROP_VOLTAGE_OCV:
 	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
 	case POWER_SUPPLY_PROP_POWER_NOW:
 		return 1;
 	default: