Skip to content

L
linux
Commit e6d3a689 authored by Lionel Bouton's avatar Lionel Bouton Committed by Arnaldo Carvalho de Melo
Browse files
Options

[PATCH] Enhanced SiS96x support 

This is an update for the SiS IDE driver.

This is a 99% Vojtech work :
- Independant southbridge detection (no need to add current and future
  MuTIOL northbridge PCI ids knowledge to the driver),
- Lots of code cleanup,
- Debug code removed (unused for a while, I will maintain it in my tree
  if needed),

I changed some things:
- the new config_xfer_rate is commented out until ide_find_best_mode is
  patched for bad drive handling (until then I reverted to the old one
  using the config_drive_xfer_rate helper function).
parent 5359cb24
Show whitespace changes
Inline Side-by-side
Showing with 177 additions and 292 deletions
drivers/ide/pci/sis5513.c
View file @ e6d3a689
/* /*
* linux/drivers/ide/pci/sis5513.c Version 0.14ac Sept 11, 2002 * linux/drivers/ide/pci/sis5513.c Version 0.16ac+vp Jun 18, 2003
* *
* Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org> * Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2002 Lionel Bouton <Lionel.Bouton@inet6.fr>, Maintainer * Copyright (C) 2002 Lionel Bouton <Lionel.Bouton@inet6.fr>, Maintainer
* Copyright (C) 2003 Vojtech Pavlik <vojtech@suse.cz>
* May be copied or modified under the terms of the GNU General Public License * May be copied or modified under the terms of the GNU General Public License
* *
* *
...@@ -14,31 +15,33 @@ ...@@ -14,31 +15,33 @@
* for checking code correctness, providing patches. * for checking code correctness, providing patches.
* *
* *
* Original tests and design on the SiS620/5513 chipset. * Original tests and design on the SiS620 chipset.
* ATA100 tests and design on the SiS735/5513 chipset. * ATA100 tests and design on the SiS735 chipset.
* ATA16/33 support from specs * ATA16/33 support from specs
* ATA133 support for SiS961/962 by L.C. Chang <lcchang@sis.com.tw> * ATA133 support for SiS961/962 by L.C. Chang <lcchang@sis.com.tw>
* ATA133 961/962/963 fixes by Vojtech Pavlik <vojtech@suse.cz>
* *
* Documentation: * Documentation:
* SiS chipset documentation available under NDA to companies not * SiS chipset documentation available under NDA to companies only
* individuals only. * (not to individuals).
*/ */
/* /*
* Notes/Special cases: * The original SiS5513 comes from a SiS5511/55112/5513 chipset. The original
* - SiS5513 derivatives usually have the same PCI IDE register layout when * SiS5513 was also used in the SiS5596/5513 chipset. Thus if we see a SiS5511
* supporting the same UDMA modes. * or SiS5596, we can assume we see the first MWDMA-16 capable SiS5513 chip.
* - There are exceptions : *
* . SiS730 and SiS550 use the same layout than ATA_66 chipsets but support * Later SiS chipsets integrated the 5513 functionality into the NorthBridge,
* ATA_100 * starting with SiS5571 and up to SiS745. The PCI ID didn't change, though. We
* . ATA_133 capable chipsets mark a shift in SiS chipset designs : previously * can figure out that we have a more modern and more capable 5513 by looking
* south and northbridge were integrated, making IDE (a southbridge function) * for the respective NorthBridge IDs.
* capabilities easily deduced from the northbridge PCI id. With ATA_133, *
* chipsets started to be split in the usual north/south bridges chips * Even later (96x family) SiS chipsets use the MuTIOL link and place the 5513
* -> the driver needs to detect the correct southbridge when faced to newest * into the SouthBrige. Here we cannot rely on looking up the NorthBridge PCI
* northbridges. * ID, while the now ATA-133 capable 5513 still has the same PCI ID.
* . On ATA133 capable chipsets when bit 30 of dword at 0x54 is 1 the * Fortunately the 5513 can be 'unmasked' by fiddling with some config space
* configuration space is moved from 0x40 to 0x70. * bits, changing its device id to the true one - 5517 for 961 and 5518 for
* 962/963.
*/ */
#include <linux/config.h> #include <linux/config.h>
...@@ -57,94 +60,23 @@ ...@@ -57,94 +60,23 @@
#include <linux/init.h> #include <linux/init.h>
#include <linux/ide.h> #include <linux/ide.h>
#include <asm/io.h>
#include <asm/irq.h> #include <asm/irq.h>
#include "ide-timing.h"
#include "ide_modes.h" #include "ide_modes.h"
#include "sis5513.h" #include "sis5513.h"
/* When DEBUG is defined it outputs initial PCI config register
values and changes made to them by the driver */
// #define DEBUG
/* When BROKEN_LEVEL is defined it limits the DMA mode
at boot time to its value */
// #define BROKEN_LEVEL XFER_SW_DMA_0
/* Miscellaneous flags */
#define SIS5513_LATENCY 0x01
/* registers layout and init values are chipset family dependant */ /* registers layout and init values are chipset family dependant */
/* 1/ define families */
#define ATA_00 0x00
#define ATA_16 0x01 #define ATA_16 0x01
#define ATA_33 0x02 #define ATA_33 0x02
#define ATA_66 0x03 #define ATA_66 0x03
#define ATA_100a 0x04 // SiS730 is ATA100 with ATA66 layout #define ATA_100a 0x04 // SiS730/SiS550 is ATA100 with ATA66 layout
#define ATA_100 0x05 #define ATA_100 0x05
#define ATA_133a 0x06 // SiS961b with 133 support #define ATA_133a 0x06 // SiS961b with 133 support
#define ATA_133 0x07 // SiS962 #define ATA_133 0x07 // SiS962/963
/* 2/ variable holding the controller chipset family value */
static u8 chipset_family;
/*
* Debug code: following IDE config registers' changes
*/
#ifdef DEBUG
/* Copy of IDE Config registers fewer will be used
* Some odd chipsets hang if unused registers are accessed
* -> We only access them in #DEBUG code (then we'll see if SiS did
* it right from day one) */
static u8 ide_regs_copy[0xff];
/* Read config registers, print differences from previous read */
static void sis5513_load_verify_registers(struct pci_dev* dev, char* info) {
int i;
u8 reg_val;
u8 changed=0;
printk("SIS5513: %s, changed registers:\n", info);
for(i=0; i<=0xff; i++) {
pci_read_config_byte(dev, i, &reg_val);
if (reg_val != ide_regs_copy[i]) {
printk("%02x: %02x -> %02x\n",
i, ide_regs_copy[i], reg_val);
ide_regs_copy[i]=reg_val;
changed=1;
}
}
if (!changed) {
printk("none\n");
}
}
/* Load config registers, no printing */
static void sis5513_load_registers(struct pci_dev* dev) {
int i;
for(i=0; i<=0xff; i++) {
pci_read_config_byte(dev, i, &(ide_regs_copy[i]));
}
}
/* Print config space registers a la "lspci -vxxx" */
static void sis5513_print_registers(struct pci_dev* dev, char* marker) {
int i,j;
sis5513_load_registers(dev);
printk("SIS5513 %s\n", marker);
for(i=0; i<=0xf; i++) {
printk("SIS5513 dump: %d" "0:", i);
for(j=0; j<=0xf; j++) {
printk(" %02x", ide_regs_copy[(i<<16)+j]);
}
printk("\n");
}
}
#endif
static u8 chipset_family;
/* /*
* Devices supported * Devices supported
...@@ -155,42 +87,38 @@ static const struct { ...@@ -155,42 +87,38 @@ static const struct {
u8 chipset_family; u8 chipset_family;
u8 flags; u8 flags;
} SiSHostChipInfo[] = { } SiSHostChipInfo[] = {
{ "SiS752", PCI_DEVICE_ID_SI_752, ATA_133, 0 }, { "SiS745", PCI_DEVICE_ID_SI_745, ATA_100 },
{ "SiS751", PCI_DEVICE_ID_SI_751, ATA_133, 0 }, { "SiS735", PCI_DEVICE_ID_SI_735, ATA_100 },
{ "SiS750", PCI_DEVICE_ID_SI_750, ATA_133, 0 }, { "SiS733", PCI_DEVICE_ID_SI_733, ATA_100 },
{ "SiS748", PCI_DEVICE_ID_SI_748, ATA_133, 0 }, { "SiS635", PCI_DEVICE_ID_SI_635, ATA_100 },
{ "SiS746", PCI_DEVICE_ID_SI_746, ATA_133, 0 }, { "SiS633", PCI_DEVICE_ID_SI_633, ATA_100 },
{ "SiS745", PCI_DEVICE_ID_SI_745, ATA_133, 0 },
{ "SiS740", PCI_DEVICE_ID_SI_740, ATA_133, 0 }, { "SiS730", PCI_DEVICE_ID_SI_730, ATA_100a },
{ "SiS735", PCI_DEVICE_ID_SI_735, ATA_100, SIS5513_LATENCY }, { "SiS550", PCI_DEVICE_ID_SI_550, ATA_100a },
{ "SiS730", PCI_DEVICE_ID_SI_730, ATA_100a, SIS5513_LATENCY },
{ "SiS655", PCI_DEVICE_ID_SI_655, ATA_133, 0 }, { "SiS640", PCI_DEVICE_ID_SI_640, ATA_66 },
{ "SiS652", PCI_DEVICE_ID_SI_652, ATA_133, 0 }, { "SiS630", PCI_DEVICE_ID_SI_630, ATA_66 },
{ "SiS651", PCI_DEVICE_ID_SI_651, ATA_133, 0 }, { "SiS620", PCI_DEVICE_ID_SI_620, ATA_66 },
{ "SiS650", PCI_DEVICE_ID_SI_650, ATA_133, 0 }, { "SiS540", PCI_DEVICE_ID_SI_540, ATA_66 },
{ "SiS648", PCI_DEVICE_ID_SI_648, ATA_133, 0 }, { "SiS530", PCI_DEVICE_ID_SI_530, ATA_66 },
{ "SiS646", PCI_DEVICE_ID_SI_646, ATA_133, 0 },
{ "SiS645", PCI_DEVICE_ID_SI_645, ATA_133, 0 }, { "SiS5600", PCI_DEVICE_ID_SI_5600, ATA_33 },
{ "SiS635", PCI_DEVICE_ID_SI_635, ATA_100, SIS5513_LATENCY }, { "SiS5598", PCI_DEVICE_ID_SI_5598, ATA_33 },
{ "SiS640", PCI_DEVICE_ID_SI_640, ATA_66, SIS5513_LATENCY }, { "SiS5597", PCI_DEVICE_ID_SI_5597, ATA_33 },
{ "SiS630", PCI_DEVICE_ID_SI_630, ATA_66, SIS5513_LATENCY }, { "SiS5591/2", PCI_DEVICE_ID_SI_5591, ATA_33 },
{ "SiS620", PCI_DEVICE_ID_SI_620, ATA_66, SIS5513_LATENCY }, { "SiS5582", PCI_DEVICE_ID_SI_5582, ATA_33 },
{ "SiS550", PCI_DEVICE_ID_SI_550, ATA_100a, 0}, { "SiS5581", PCI_DEVICE_ID_SI_5581, ATA_33 },
{ "SiS540", PCI_DEVICE_ID_SI_540, ATA_66, 0},
{ "SiS530", PCI_DEVICE_ID_SI_530, ATA_66, 0}, { "SiS5596", PCI_DEVICE_ID_SI_5596, ATA_16 },
{ "SiS5600", PCI_DEVICE_ID_SI_5600, ATA_33, 0}, { "SiS5571", PCI_DEVICE_ID_SI_5571, ATA_16 },
{ "SiS5598", PCI_DEVICE_ID_SI_5598, ATA_33, 0}, { "SiS551x", PCI_DEVICE_ID_SI_5511, ATA_16 },
{ "SiS5597", PCI_DEVICE_ID_SI_5597, ATA_33, 0},
{ "SiS5591", PCI_DEVICE_ID_SI_5591, ATA_33, 0},
{ "SiS5513", PCI_DEVICE_ID_SI_5513, ATA_16, 0},
{ "SiS5511", PCI_DEVICE_ID_SI_5511, ATA_16, 0},
}; };
/* Cycle time bits and values vary across chip dma capabilities /* Cycle time bits and values vary across chip dma capabilities
These three arrays hold the register layout and the values to set. These three arrays hold the register layout and the values to set.
Indexed by chipset_family and (dma_mode - XFER_UDMA_0) */ Indexed by chipset_family and (dma_mode - XFER_UDMA_0) */
/* {ATA_00, ATA_16, ATA_33, ATA_66, ATA_100a, ATA_100, ATA_133} */ /* {0, ATA_16, ATA_33, ATA_66, ATA_100a, ATA_100, ATA_133} */
static u8 cycle_time_offset[] = {0,0,5,4,4,0,0}; static u8 cycle_time_offset[] = {0,0,5,4,4,0,0};
static u8 cycle_time_range[] = {0,0,2,3,3,4,4}; static u8 cycle_time_range[] = {0,0,2,3,3,4,4};
static u8 cycle_time_value[][XFER_UDMA_6 - XFER_UDMA_0 + 1] = { static u8 cycle_time_value[][XFER_UDMA_6 - XFER_UDMA_0 + 1] = {
...@@ -249,8 +177,6 @@ static u8 rco_time_value[][8] = { ...@@ -249,8 +177,6 @@ static u8 rco_time_value[][8] = {
{40,12,4,12,5,34,12,5}, {40,12,4,12,5,34,12,5},
}; };
static struct pci_dev *host_dev = NULL;
/* /*
* Printing configuration * Printing configuration
*/ */
...@@ -334,6 +260,7 @@ static char* get_drives_info (char *buffer, u8 pos) ...@@ -334,6 +260,7 @@ static char* get_drives_info (char *buffer, u8 pos)
} }
pci_read_config_dword(bmide_dev, (unsigned long)drive_pci+4*pos, &regdw0); pci_read_config_dword(bmide_dev, (unsigned long)drive_pci+4*pos, &regdw0);
pci_read_config_dword(bmide_dev, (unsigned long)drive_pci+4*pos+8, &regdw1); pci_read_config_dword(bmide_dev, (unsigned long)drive_pci+4*pos+8, &regdw1);
p += sprintf(p, "Drive %d:\n", pos); p += sprintf(p, "Drive %d:\n", pos);
} }
...@@ -372,11 +299,12 @@ static char* get_drives_info (char *buffer, u8 pos) ...@@ -372,11 +299,12 @@ static char* get_drives_info (char *buffer, u8 pos)
p += sprintf(p, "\n"); p += sprintf(p, "\n");
} }
if (chipset_family < ATA_133) { /* else case TODO */ if (chipset_family < ATA_133) { /* else case TODO */
/* Data Active */ /* Data Active */
p += sprintf(p, " Data Active Time "); p += sprintf(p, " Data Active Time ");
switch(chipset_family) { switch(chipset_family) {
case ATA_00:
case ATA_16: /* confirmed */ case ATA_16: /* confirmed */
case ATA_33: case ATA_33:
case ATA_66: case ATA_66:
...@@ -387,7 +315,6 @@ static char* get_drives_info (char *buffer, u8 pos) ...@@ -387,7 +315,6 @@ static char* get_drives_info (char *buffer, u8 pos)
} }
p += sprintf(p, " \t Data Active Time "); p += sprintf(p, " \t Data Active Time ");
switch(chipset_family) { switch(chipset_family) {
case ATA_00:
case ATA_16: case ATA_16:
case ATA_33: case ATA_33:
case ATA_66: case ATA_66:
...@@ -500,32 +427,9 @@ static int sis_get_info (char *buffer, char **addr, off_t offset, int count) ...@@ -500,32 +427,9 @@ static int sis_get_info (char *buffer, char **addr, off_t offset, int count)
static u8 sis5513_ratemask (ide_drive_t *drive) static u8 sis5513_ratemask (ide_drive_t *drive)
{ {
#if 0
u8 rates[] = { 0, 0, 1, 2, 3, 3, 4, 4 }; u8 rates[] = { 0, 0, 1, 2, 3, 3, 4, 4 };
u8 mode = rates[chipset_family]; u8 mode = rates[chipset_family];
#else
u8 mode;
switch(chipset_family) {
case ATA_133:
case ATA_133a:
mode = 4;
break;
case ATA_100:
case ATA_100a:
mode = 3;
break;
case ATA_66:
mode = 2;
break;
case ATA_33:
return 1;
case ATA_16:
case ATA_00:
default:
return 0;
}
#endif
if (!eighty_ninty_three(drive)) if (!eighty_ninty_three(drive))
mode = min(mode, (u8)1); mode = min(mode, (u8)1);
return mode; return mode;
...@@ -543,20 +447,12 @@ static void config_drive_art_rwp (ide_drive_t *drive) ...@@ -543,20 +447,12 @@ static void config_drive_art_rwp (ide_drive_t *drive)
u8 reg4bh = 0; u8 reg4bh = 0;
u8 rw_prefetch = (0x11 << drive->dn); u8 rw_prefetch = (0x11 << drive->dn);
#ifdef DEBUG
printk("SIS5513: config_drive_art_rwp, drive %d\n", drive->dn);
sis5513_load_verify_registers(dev, "config_drive_art_rwp start");
#endif
if (drive->media != ide_disk) if (drive->media != ide_disk)
return; return;
pci_read_config_byte(dev, 0x4b, &reg4bh); pci_read_config_byte(dev, 0x4b, &reg4bh);
if ((reg4bh & rw_prefetch) != rw_prefetch) if ((reg4bh & rw_prefetch) != rw_prefetch)
pci_write_config_byte(dev, 0x4b, reg4bh|rw_prefetch); pci_write_config_byte(dev, 0x4b, reg4bh|rw_prefetch);
#ifdef DEBUG
sis5513_load_verify_registers(dev, "config_drive_art_rwp end");
#endif
} }
...@@ -571,10 +467,6 @@ static void config_art_rwp_pio (ide_drive_t *drive, u8 pio) ...@@ -571,10 +467,6 @@ static void config_art_rwp_pio (ide_drive_t *drive, u8 pio)
u16 eide_pio_timing[6] = {600, 390, 240, 180, 120, 90}; u16 eide_pio_timing[6] = {600, 390, 240, 180, 120, 90};
u16 xfer_pio = drive->id->eide_pio_modes; u16 xfer_pio = drive->id->eide_pio_modes;
#ifdef DEBUG
sis5513_load_verify_registers(dev, "config_drive_art_rwp_pio start");
#endif
config_drive_art_rwp(drive); config_drive_art_rwp(drive);
pio = ide_get_best_pio_mode(drive, 255, pio, NULL); pio = ide_get_best_pio_mode(drive, 255, pio, NULL);
...@@ -594,12 +486,6 @@ static void config_art_rwp_pio (ide_drive_t *drive, u8 pio) ...@@ -594,12 +486,6 @@ static void config_art_rwp_pio (ide_drive_t *drive, u8 pio)
timing = (xfer_pio >= pio) ? xfer_pio : pio; timing = (xfer_pio >= pio) ? xfer_pio : pio;
#ifdef DEBUG
printk("SIS5513: config_drive_art_rwp_pio, "
"drive %d, pio %d, timing %d\n",
drive->dn, pio, timing);
#endif
/* In pre ATA_133 case, drives sit at 0x40 + 4*drive->dn */ /* In pre ATA_133 case, drives sit at 0x40 + 4*drive->dn */
drive_pci = 0x40; drive_pci = 0x40;
/* In SiS962 case drives sit at (0x40 or 0x70) + 8*drive->dn) */ /* In SiS962 case drives sit at (0x40 or 0x70) + 8*drive->dn) */
...@@ -645,41 +531,24 @@ static void config_art_rwp_pio (ide_drive_t *drive, u8 pio) ...@@ -645,41 +531,24 @@ static void config_art_rwp_pio (ide_drive_t *drive, u8 pio)
pci_read_config_dword(dev, drive_pci, &test3); pci_read_config_dword(dev, drive_pci, &test3);
test3 &= 0xc0c00fff; test3 &= 0xc0c00fff;
if (test3 & 0x08) { if (test3 & 0x08) {
test3 |= (unsigned long)ini_time_value[ATA_133-ATA_00][timing] << 12; test3 |= (unsigned long)ini_time_value[ATA_133][timing] << 12;
test3 |= (unsigned long)act_time_value[ATA_133-ATA_00][timing] << 16; test3 |= (unsigned long)act_time_value[ATA_133][timing] << 16;
test3 |= (unsigned long)rco_time_value[ATA_133-ATA_00][timing] << 24; test3 |= (unsigned long)rco_time_value[ATA_133][timing] << 24;
} else { } else {
test3 |= (unsigned long)ini_time_value[ATA_100-ATA_00][timing] << 12; test3 |= (unsigned long)ini_time_value[ATA_100][timing] << 12;
test3 |= (unsigned long)act_time_value[ATA_100-ATA_00][timing] << 16; test3 |= (unsigned long)act_time_value[ATA_100][timing] << 16;
test3 |= (unsigned long)rco_time_value[ATA_100-ATA_00][timing] << 24; test3 |= (unsigned long)rco_time_value[ATA_100][timing] << 24;
} }
pci_write_config_dword(dev, drive_pci, test3); pci_write_config_dword(dev, drive_pci, test3);
} }
#ifdef DEBUG
sis5513_load_verify_registers(dev, "config_drive_art_rwp_pio start");
#endif
} }
static int config_chipset_for_pio (ide_drive_t *drive, u8 pio) static int config_chipset_for_pio (ide_drive_t *drive, u8 pio)
{ {
#if 0 if (pio == 255)
config_art_rwp_pio(drive, pio); pio = ide_find_best_mode(drive, XFER_PIO | XFER_EPIO) - XFER_PIO_0;
return ide_config_drive_speed(drive, (XFER_PIO_0 + pio));
#else
u8 speed;
switch(pio) {
case 4: speed = XFER_PIO_4; break;
case 3: speed = XFER_PIO_3; break;
case 2: speed = XFER_PIO_2; break;
case 1: speed = XFER_PIO_1; break;
default: speed = XFER_PIO_0; break;
}
config_art_rwp_pio(drive, pio); config_art_rwp_pio(drive, pio);
return ide_config_drive_speed(drive, speed); return ide_config_drive_speed(drive, XFER_PIO_0 + min_t(u8, pio, 4));
#endif
} }
static int sis5513_tune_chipset (ide_drive_t *drive, u8 xferspeed) static int sis5513_tune_chipset (ide_drive_t *drive, u8 xferspeed)
...@@ -690,24 +559,8 @@ static int sis5513_tune_chipset (ide_drive_t *drive, u8 xferspeed) ...@@ -690,24 +559,8 @@ static int sis5513_tune_chipset (ide_drive_t *drive, u8 xferspeed)
u8 drive_pci, reg, speed; u8 drive_pci, reg, speed;
u32 regdw; u32 regdw;
#ifdef DEBUG
sis5513_load_verify_registers(dev, "sis5513_tune_chipset start");
#endif
#ifdef BROKEN_LEVEL
#ifdef DEBUG
printk("SIS5513: BROKEN_LEVEL activated, speed=%d -> speed=%d\n", xferspeed, BROKEN_LEVEL);
#endif
if (xferspeed > BROKEN_LEVEL) xferspeed = BROKEN_LEVEL;
#endif
speed = ide_rate_filter(sis5513_ratemask(drive), xferspeed); speed = ide_rate_filter(sis5513_ratemask(drive), xferspeed);
#ifdef DEBUG
printk("SIS5513: sis5513_tune_chipset, drive %d, speed %d\n",
drive->dn, xferspeed);
#endif
/* See config_art_rwp_pio for drive pci config registers */ /* See config_art_rwp_pio for drive pci config registers */
drive_pci = 0x40; drive_pci = 0x40;
if (chipset_family >= ATA_133) { if (chipset_family >= ATA_133) {
...@@ -746,14 +599,14 @@ static int sis5513_tune_chipset (ide_drive_t *drive, u8 xferspeed) ...@@ -746,14 +599,14 @@ static int sis5513_tune_chipset (ide_drive_t *drive, u8 xferspeed)
regdw &= 0xfffff00f; regdw &= 0xfffff00f;
/* check if ATA133 enable */ /* check if ATA133 enable */
if (regdw & 0x08) { if (regdw & 0x08) {
regdw |= (unsigned long)cycle_time_value[ATA_133-ATA_00][speed-XFER_UDMA_0] << 4; regdw |= (unsigned long)cycle_time_value[ATA_133][speed-XFER_UDMA_0] << 4;
regdw |= (unsigned long)cvs_time_value[ATA_133-ATA_00][speed-XFER_UDMA_0] << 8; regdw |= (unsigned long)cvs_time_value[ATA_133][speed-XFER_UDMA_0] << 8;
} else { } else {
/* if ATA133 disable, we should not set speed above UDMA5 */ /* if ATA133 disable, we should not set speed above UDMA5 */
if (speed > XFER_UDMA_5) if (speed > XFER_UDMA_5)
speed = XFER_UDMA_5; speed = XFER_UDMA_5;
regdw |= (unsigned long)cycle_time_value[ATA_100-ATA_00][speed-XFER_UDMA_0] << 4; regdw |= (unsigned long)cycle_time_value[ATA_100][speed-XFER_UDMA_0] << 4;
regdw |= (unsigned long)cvs_time_value[ATA_100-ATA_00][speed-XFER_UDMA_0] << 8; regdw |= (unsigned long)cvs_time_value[ATA_100][speed-XFER_UDMA_0] << 8;
} }
pci_write_config_dword(dev, (unsigned long)drive_pci, regdw); pci_write_config_dword(dev, (unsigned long)drive_pci, regdw);
} else { } else {
...@@ -763,7 +616,7 @@ static int sis5513_tune_chipset (ide_drive_t *drive, u8 xferspeed) ...@@ -763,7 +616,7 @@ static int sis5513_tune_chipset (ide_drive_t *drive, u8 xferspeed)
reg &= ~((0xFF >> (8 - cycle_time_range[chipset_family])) reg &= ~((0xFF >> (8 - cycle_time_range[chipset_family]))
<< cycle_time_offset[chipset_family]); << cycle_time_offset[chipset_family]);
/* set reg cycle time bits */ /* set reg cycle time bits */
reg |= cycle_time_value[chipset_family-ATA_00][speed-XFER_UDMA_0] reg |= cycle_time_value[chipset_family][speed-XFER_UDMA_0]
<< cycle_time_offset[chipset_family]; << cycle_time_offset[chipset_family];
pci_write_config_byte(dev, drive_pci+1, reg); pci_write_config_byte(dev, drive_pci+1, reg);
} }
...@@ -782,9 +635,7 @@ static int sis5513_tune_chipset (ide_drive_t *drive, u8 xferspeed) ...@@ -782,9 +635,7 @@ static int sis5513_tune_chipset (ide_drive_t *drive, u8 xferspeed)
case XFER_PIO_0: case XFER_PIO_0:
default: return((int) config_chipset_for_pio(drive, 0)); default: return((int) config_chipset_for_pio(drive, 0));
} }
#ifdef DEBUG
sis5513_load_verify_registers(dev, "sis5513_tune_chipset end");
#endif
return ((int) ide_config_drive_speed(drive, speed)); return ((int) ide_config_drive_speed(drive, speed));
} }
...@@ -863,18 +714,34 @@ static int sis5513_config_xfer_rate (ide_drive_t *drive) ...@@ -863,18 +714,34 @@ static int sis5513_config_xfer_rate (ide_drive_t *drive)
return sis5513_config_drive_xfer_rate(drive); return sis5513_config_drive_xfer_rate(drive);
} }
/* Helper function used at init time /*
* returns a PCI device revision ID Future simpler config_xfer_rate :
* (used to detect different IDE controller versions) When ide_find_best_mode is made bad-drive aware
*/ - remove config_drive_xfer_rate and config_chipset_for_dma,
static u8 __init devfn_rev(int device, int function) - replace config_xfer_rate with the following
static int sis5513_config_xfer_rate (ide_drive_t *drive)
{ {
u8 revision; u16 w80 = HWIF(drive)->udma_four;
/* Find device */ u16 speed;
struct pci_dev* dev = pci_find_slot(0,PCI_DEVFN(device,function));
pci_read_config_byte(dev, PCI_REVISION_ID, &revision); config_drive_art_rwp(drive);
return revision; config_art_rwp_pio(drive, 5);
speed = ide_find_best_mode(drive,
XFER_PIO | XFER_EPIO | XFER_SWDMA | XFER_MWDMA |
(chipset_family >= ATA_33 ? XFER_UDMA : 0) |
(w80 && chipset_family >= ATA_66 ? XFER_UDMA_66 : 0) |
(w80 && chipset_family >= ATA_100a ? XFER_UDMA_100 : 0) |
(w80 && chipset_family >= ATA_133a ? XFER_UDMA_133 : 0));
sis5513_tune_chipset(drive, speed);
if (drive->autodma && (speed & XFER_MODE) != XFER_PIO)
return HWIF(drive)->ide_dma_on(drive);
return HWIF(drive)->ide_dma_off_quietly(drive);
} }
*/
/* Chip detection and general config */ /* Chip detection and general config */
static unsigned int __init init_chipset_sis5513 (struct pci_dev *dev, const char *name) static unsigned int __init init_chipset_sis5513 (struct pci_dev *dev, const char *name)
...@@ -882,71 +749,86 @@ static unsigned int __init init_chipset_sis5513 (struct pci_dev *dev, const char ...@@ -882,71 +749,86 @@ static unsigned int __init init_chipset_sis5513 (struct pci_dev *dev, const char
struct pci_dev *host; struct pci_dev *host;
int i = 0; int i = 0;
/* Find the chip */ chipset_family = 0;
for (i = 0; i < ARRAY_SIZE(SiSHostChipInfo) && !host_dev; i++) {
host = pci_find_device (PCI_VENDOR_ID_SI, for (i = 0; i < ARRAY_SIZE(SiSHostChipInfo) && !chipset_family; i++) {
SiSHostChipInfo[i].host_id,
NULL); host = pci_find_device(PCI_VENDOR_ID_SI, SiSHostChipInfo[i].host_id, NULL);
if (!host) if (!host)
continue; continue;
host_dev = host;
chipset_family = SiSHostChipInfo[i].chipset_family; chipset_family = SiSHostChipInfo[i].chipset_family;
/* check 100/133 chipset family */ /* Special case for SiS630 : 630S/ET is ATA_100a */
if (chipset_family == ATA_133) { if (SiSHostChipInfo[i].host_id == PCI_DEVICE_ID_SI_630) {
u32 reg54h; u8 hostrev;
u16 devid; pci_read_config_byte(host, PCI_REVISION_ID, &hostrev);
pci_read_config_dword(dev, 0x54, &reg54h); if (hostrev >= 0x30)
/* SiS962 and above report 0x5518 dev id if high bit is cleared */ chipset_family = ATA_100a;
pci_write_config_dword(dev, 0x54, (reg54h & 0x7fffffff));
pci_read_config_word(dev, 0x02, &devid);
/* restore register 0x54 */
pci_write_config_dword(dev, 0x54, reg54h);
/* devid 5518 here means SiS962 or later
which supports ATA133.
These are refered by chipset_family = ATA133
*/
if (devid != 0x5518) {
u8 reg49h;
/* SiS961 family */
pci_read_config_byte(dev, 0x49, &reg49h);
/* check isa bridge device rev id */
if (((devfn_rev(2,0) & 0xff) == 0x10) && (reg49h & 0x80))
chipset_family = ATA_133a;
else
chipset_family = ATA_100;
} }
printk(KERN_INFO "SIS5513: %s %s controller\n",
SiSHostChipInfo[i].name, chipset_capability[chipset_family]);
} }
printk(SiSHostChipInfo[i].name);
printk(" %s controller", chipset_capability[chipset_family]);
printk("\n");
#ifdef DEBUG if (!chipset_family) { /* Belongs to pci-quirks */
sis5513_print_registers(dev, "pci_init_sis5513 start");
#endif
if (SiSHostChipInfo[i].flags & SIS5513_LATENCY) { u32 idemisc;
u8 latency = (chipset_family == ATA_100)? 0x80 : 0x10; /* Lacking specs */ u16 trueid;
pci_write_config_byte(dev, PCI_LATENCY_TIMER, latency);
/* Disable ID masking and register remapping */
pci_read_config_dword(dev, 0x54, &idemisc);
pci_write_config_dword(dev, 0x54, (idemisc & 0x7fffffff));
pci_read_config_word(dev, PCI_DEVICE_ID, &trueid);
pci_write_config_dword(dev, 0x54, idemisc);
if (trueid == 0x5518) {
printk(KERN_INFO "SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller\n");
chipset_family = ATA_133;
}
} }
/* Special case for SiS630 : 630S/ET is ATA_100a */ if (!chipset_family) { /* Belongs to pci-quirks */
if (SiSHostChipInfo[i].host_id == PCI_DEVICE_ID_SI_630) {
/* check host device rev id */ struct pci_dev *lpc_bridge;
if (devfn_rev(0,0) >= 0x30) { u16 trueid;
chipset_family = ATA_100a; u8 prefctl;
u8 idecfg;
u8 sbrev;
pci_read_config_byte(dev, 0x4a, &idecfg);
pci_write_config_byte(dev, 0x4a, idecfg | 0x10);
pci_read_config_word(dev, PCI_DEVICE_ID, &trueid);
pci_write_config_byte(dev, 0x4a, idecfg);
if (trueid == 0x5517) { /* SiS 961/961B */
lpc_bridge = pci_find_slot(0x00, 0x10); /* Bus 0, Dev 2, Fn 0 */
pci_read_config_byte(lpc_bridge, PCI_REVISION_ID, &sbrev);
pci_read_config_byte(dev, 0x49, &prefctl);
if (sbrev == 0x10 && (prefctl & 0x80)) {
printk(KERN_INFO "SIS5513: SiS 961B MuTIOL IDE UDMA133 controller\n");
chipset_family = ATA_133a;
} else {
printk(KERN_INFO "SIS5513: SiS 961 MuTIOL IDE UDMA100 controller\n");
chipset_family = ATA_100;
} }
} }
} }
if (!chipset_family)
return -1;
/* Make general config ops here /* Make general config ops here
1/ tell IDE channels to operate in Compatibility mode only 1/ tell IDE channels to operate in Compatibility mode only
2/ tell old chips to allow per drive IDE timings */ 2/ tell old chips to allow per drive IDE timings */
if (host_dev) {
{
u8 reg; u8 reg;
u16 regw; u16 regw;
switch(chipset_family) { switch(chipset_family) {
case ATA_133: case ATA_133:
/* SiS962 operation mode */ /* SiS962 operation mode */
...@@ -959,6 +841,8 @@ static unsigned int __init init_chipset_sis5513 (struct pci_dev *dev, const char ...@@ -959,6 +841,8 @@ static unsigned int __init init_chipset_sis5513 (struct pci_dev *dev, const char
break; break;
case ATA_133a: case ATA_133a:
case ATA_100: case ATA_100:
/* Fixup latency */
pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x80);
/* Set compatibility bit */ /* Set compatibility bit */
pci_read_config_byte(dev, 0x49, &reg); pci_read_config_byte(dev, 0x49, &reg);
if (!(reg & 0x01)) { if (!(reg & 0x01)) {
...@@ -967,6 +851,9 @@ static unsigned int __init init_chipset_sis5513 (struct pci_dev *dev, const char ...@@ -967,6 +851,9 @@ static unsigned int __init init_chipset_sis5513 (struct pci_dev *dev, const char
break; break;
case ATA_100a: case ATA_100a:
case ATA_66: case ATA_66:
/* Fixup latency */
pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x10);
/* On ATA_66 chips the bit was elsewhere */ /* On ATA_66 chips the bit was elsewhere */
pci_read_config_byte(dev, 0x52, &reg); pci_read_config_byte(dev, 0x52, &reg);
if (!(reg & 0x04)) { if (!(reg & 0x04)) {
...@@ -987,8 +874,6 @@ static unsigned int __init init_chipset_sis5513 (struct pci_dev *dev, const char ...@@ -987,8 +874,6 @@ static unsigned int __init init_chipset_sis5513 (struct pci_dev *dev, const char
pci_write_config_byte(dev, 0x52, reg|0x08); pci_write_config_byte(dev, 0x52, reg|0x08);
} }
break; break;
case ATA_00:
default: break;
} }
#if defined(DISPLAY_SIS_TIMINGS) && defined(CONFIG_PROC_FS) #if defined(DISPLAY_SIS_TIMINGS) && defined(CONFIG_PROC_FS)
...@@ -999,9 +884,7 @@ static unsigned int __init init_chipset_sis5513 (struct pci_dev *dev, const char ...@@ -999,9 +884,7 @@ static unsigned int __init init_chipset_sis5513 (struct pci_dev *dev, const char
} }
#endif #endif
} }
#ifdef DEBUG
sis5513_load_verify_registers(dev, "pci_init_sis5513 end");
#endif
return 0; return 0;
} }
...@@ -1044,7 +927,7 @@ static void __init init_hwif_sis5513 (ide_hwif_t *hwif) ...@@ -1044,7 +927,7 @@ static void __init init_hwif_sis5513 (ide_hwif_t *hwif)
hwif->mwdma_mask = 0x07; hwif->mwdma_mask = 0x07;
hwif->swdma_mask = 0x07; hwif->swdma_mask = 0x07;
if (!host_dev) if (!chipset_family)
return; return;
if (!(hwif->udma_four)) if (!(hwif->udma_four))
...@@ -1102,19 +985,16 @@ static void sis5513_ide_exit(void) ...@@ -1102,19 +985,16 @@ static void sis5513_ide_exit(void)
module_init(sis5513_ide_init); module_init(sis5513_ide_init);
module_exit(sis5513_ide_exit); module_exit(sis5513_ide_exit);
MODULE_AUTHOR("Lionel Bouton, L C Chang, Andre Hedrick"); MODULE_AUTHOR("Lionel Bouton, L C Chang, Andre Hedrick, Vojtech Pavlik");
MODULE_DESCRIPTION("PCI driver module for SIS IDE"); MODULE_DESCRIPTION("PCI driver module for SIS IDE");
MODULE_LICENSE("GPL"); MODULE_LICENSE("GPL");
/* /*
* TODO: * TODO:
* - Get ridden of SisHostChipInfo[] completness dependancy. * - CLEANUP
* - Study drivers/ide/ide-timing.h. * - Use drivers/ide/ide-timing.h !
* - Are there pre-ATA_16 SiS5513 chips ? -> tune init code for them
* or remove ATA_00 define
* - More checks in the config registers (force values instead of * - More checks in the config registers (force values instead of
* relying on the BIOS setting them correctly). * relying on the BIOS setting them correctly).
* - Further optimisations ? * - Further optimisations ?
* . for example ATA66+ regs 0x48 & 0x4A * . for example ATA66+ regs 0x48 & 0x4A
*/ */
include/linux/pci_ids.h
View file @ e6d3a689
...@@ -549,6 +549,7 @@ ...@@ -549,6 +549,7 @@
#define PCI_DEVICE_ID_SI_601 0x0601 #define PCI_DEVICE_ID_SI_601 0x0601
#define PCI_DEVICE_ID_SI_620 0x0620 #define PCI_DEVICE_ID_SI_620 0x0620
#define PCI_DEVICE_ID_SI_630 0x0630 #define PCI_DEVICE_ID_SI_630 0x0630
#define PCI_DEVICE_ID_SI_633 0x0633
#define PCI_DEVICE_ID_SI_635 0x0635 #define PCI_DEVICE_ID_SI_635 0x0635
#define PCI_DEVICE_ID_SI_640 0x0640 #define PCI_DEVICE_ID_SI_640 0x0640
#define PCI_DEVICE_ID_SI_645 0x0645 #define PCI_DEVICE_ID_SI_645 0x0645
...@@ -559,6 +560,7 @@ ...@@ -559,6 +560,7 @@
#define PCI_DEVICE_ID_SI_652 0x0652 #define PCI_DEVICE_ID_SI_652 0x0652
#define PCI_DEVICE_ID_SI_655 0x0655 #define PCI_DEVICE_ID_SI_655 0x0655
#define PCI_DEVICE_ID_SI_730 0x0730 #define PCI_DEVICE_ID_SI_730 0x0730
#define PCI_DEVICE_ID_SI_733 0x0733
#define PCI_DEVICE_ID_SI_630_VGA 0x6300 #define PCI_DEVICE_ID_SI_630_VGA 0x6300
#define PCI_DEVICE_ID_SI_730_VGA 0x7300 #define PCI_DEVICE_ID_SI_730_VGA 0x7300
#define PCI_DEVICE_ID_SI_735 0x0735 #define PCI_DEVICE_ID_SI_735 0x0735
...@@ -579,7 +581,10 @@ ...@@ -579,7 +581,10 @@
#define PCI_DEVICE_ID_SI_5513 0x5513 #define PCI_DEVICE_ID_SI_5513 0x5513
#define PCI_DEVICE_ID_SI_5518 0x5518 #define PCI_DEVICE_ID_SI_5518 0x5518
#define PCI_DEVICE_ID_SI_5571 0x5571 #define PCI_DEVICE_ID_SI_5571 0x5571
#define PCI_DEVICE_ID_SI_5581 0x5581
#define PCI_DEVICE_ID_SI_5582 0x5582
#define PCI_DEVICE_ID_SI_5591 0x5591 #define PCI_DEVICE_ID_SI_5591 0x5591
#define PCI_DEVICE_ID_SI_5596 0x5596
#define PCI_DEVICE_ID_SI_5597 0x5597 #define PCI_DEVICE_ID_SI_5597 0x5597
#define PCI_DEVICE_ID_SI_5598 0x5598 #define PCI_DEVICE_ID_SI_5598 0x5598
#define PCI_DEVICE_ID_SI_5600 0x5600 #define PCI_DEVICE_ID_SI_5600 0x5600
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7