Merge foobazco.org:/sources/2.5-bk

into foobazco.org:/sources/2.5-sparc-todave

arch/sparc/defconfig

@@ -19,18 +19,22 @@ CONFIG_BROKEN_ON_SMP=y
 #
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_HOTPLUG is not set
 # CONFIG_IKCONFIG is not set
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 
 #
@@ -171,7 +175,6 @@ CONFIG_CHR_DEV_SG=m
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
 #
 # CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_REPORT_LUNS=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 
@@ -190,11 +193,11 @@ CONFIG_SCSI_SPI_ATTRS=m
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_MEGARAID is not set
 # CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_CPQFCTS is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_EATA_PIO is not set
@@ -203,6 +206,7 @@ CONFIG_SCSI_SPI_ATTRS=m
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_QLOGIC_ISP is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -263,8 +267,6 @@ CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_TUNNEL=m
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
 # CONFIG_NETFILTER is not set
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
@@ -279,7 +281,9 @@ CONFIG_SCTP_DBG_OBJCNT=y
 # CONFIG_SCTP_HMAC_SHA1 is not set
 CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
@@ -300,18 +304,23 @@ CONFIG_SCTP_HMAC_MD5=y
 # Network testing
 #
 CONFIG_NET_PKTGEN=m
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
 # CONFIG_ETHERTAP is not set
 
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
 #
 # Ethernet (10 or 100Mbit)
 #
@@ -342,7 +351,6 @@ CONFIG_SUNQE=m
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
 
@@ -350,46 +358,29 @@ CONFIG_SUNQE=m
 # Ethernet (10000 Mbit)
 #
 # CONFIG_IXGB is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
+# CONFIG_S2IO is not set
 
 #
 # Token Ring devices
 #
 # CONFIG_TR is not set
-# CONFIG_NET_FC is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
 
 #
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
+# Wireless LAN (non-hamradio)
 #
-# CONFIG_IRDA is not set
+# CONFIG_NET_RADIO is not set
 
 #
-# Bluetooth support
+# Wan interfaces
 #
-# CONFIG_BT is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
 
 #
 # Unix98 PTY support
@@ -486,6 +477,7 @@ CONFIG_ISO9660_FS=m
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
 # CONFIG_DEVFS_FS is not set
 CONFIG_DEVPTS_FS_XATTR=y
 # CONFIG_DEVPTS_FS_SECURITY is not set
@@ -527,9 +519,9 @@ CONFIG_SUNRPC_GSS=m
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_SMB_FS is not set
 CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
 CONFIG_AFS_FS=m
 CONFIG_RXRPC=m
 
@@ -641,11 +633,13 @@ CONFIG_CRYPTO_CAST6=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_TEST is not set
 
 #
 # Library routines
 #
 CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y

arch/sparc/kernel/ioport.c

@@ -41,7 +41,7 @@
 #include <asm/oplib.h>
 #include <asm/page.h>
 #include <asm/pgalloc.h>
-#include <asm/pgtable.h>
+#include <asm/dma.h>
 
 #define mmu_inval_dma_area(p, l)	/* Anton pulled it out for 2.4.0-xx */
 

arch/sparc/kernel/setup.c

@@ -234,7 +234,6 @@ extern void sun4c_probe_vac(void);
 extern char cputypval;
 extern unsigned long start, end;
 extern void panic_setup(char *, int *);
-extern void srmmu_end_memory(unsigned long, unsigned long *);
 
 extern unsigned short root_flags;
 extern unsigned short root_dev;

arch/sparc/mm/io-unit.c

@@ -22,6 +22,7 @@
 #include <asm/bitops.h>
 #include <asm/cacheflush.h>
 #include <asm/tlbflush.h>
+#include <asm/dma.h>
 
 /* #define IOUNIT_DEBUG */
 #ifdef IOUNIT_DEBUG

arch/sparc/mm/iommu.c

@@ -25,6 +25,7 @@
 #include <asm/tlbflush.h>
 #include <asm/bitext.h>
 #include <asm/iommu.h>
+#include <asm/dma.h>
 
 /*
  * This can be sized dynamically, but we will do this

arch/sparc/mm/nosrmmu.c

@@ -9,10 +9,12 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <asm/mbus.h>
+#include <asm/sbus.h>
 
 static char shouldnothappen[] __initdata = "SUN4 kernel can only run on SUN4\n";
 
 enum mbus_module srmmu_modtype;
+void *srmmu_nocache_pool;
 
 int vac_cache_size = 0;
 
@@ -46,11 +48,6 @@ void srmmu_unmapioaddr(unsigned long virt_addr)
 {
 }
 
-void __init srmmu_end_memory(unsigned long memory_size, unsigned long *mem_end_p)
-{
-	return 0;
-}
-
 __u32 iounit_map_dma_init(struct sbus_bus *sbus, int size)
 {
 	return 0;

drivers/sbus/sbus.c

@@ -309,6 +309,10 @@ static void __init sbus_fixup_all_regs(struct sbus_dev *first_sdev)
 extern void register_proc_sparc_ioport(void);
 extern void firetruck_init(void);
 
+#ifdef CONFIG_SUN4
+extern void sun4_dvma_init(void);
+#endif
+
 static int __init sbus_init(void)
 {
 	int nd, this_sbus, sbus_devs, topnd, iommund;

include/asm-sparc/bug.h

@@ -8,7 +8,7 @@
  */
 #if (__GNUC__ > 3) || \
     (__GNUC__ == 3 && __GNUC_MINOR__ > 3) || \
-    (__GNUC__ == 3 && __GNUC_MINOR__ == 3 && __GNUC_PATCHLEVEL__ >= 1)
+    (__GNUC__ == 3 && __GNUC_MINOR__ == 3 && __GNUC_PATCHLEVEL__ >= 4)
 #define __bug_trap()		__builtin_trap()
 #else
 #define __bug_trap()					\

include/asm-sparc/dma.h

@@ -19,6 +19,7 @@
 #include <asm/io.h>
 #include <linux/spinlock.h>
 
+struct page;
 extern spinlock_t  dma_spin_lock;
 
 static __inline__ unsigned long claim_dma_lock(void)
@@ -244,4 +245,46 @@ extern int isa_dma_bridge_buggy;
 #define isa_dma_bridge_buggy	(0)
 #endif
 
+/* Routines for data transfer buffers. */
+BTFIXUPDEF_CALL(char *, mmu_lockarea, char *, unsigned long)
+BTFIXUPDEF_CALL(void,   mmu_unlockarea, char *, unsigned long)
+
+#define mmu_lockarea(vaddr,len) BTFIXUP_CALL(mmu_lockarea)(vaddr,len)
+#define mmu_unlockarea(vaddr,len) BTFIXUP_CALL(mmu_unlockarea)(vaddr,len)
+
+/* These are implementations for sbus_map_sg/sbus_unmap_sg... collapse later */
+BTFIXUPDEF_CALL(__u32, mmu_get_scsi_one, char *, unsigned long, struct sbus_bus *sbus)
+BTFIXUPDEF_CALL(void,  mmu_get_scsi_sgl, struct scatterlist *, int, struct sbus_bus *sbus)
+BTFIXUPDEF_CALL(void,  mmu_release_scsi_one, __u32, unsigned long, struct sbus_bus *sbus)
+BTFIXUPDEF_CALL(void,  mmu_release_scsi_sgl, struct scatterlist *, int, struct sbus_bus *sbus)
+
+#define mmu_get_scsi_one(vaddr,len,sbus) BTFIXUP_CALL(mmu_get_scsi_one)(vaddr,len,sbus)
+#define mmu_get_scsi_sgl(sg,sz,sbus) BTFIXUP_CALL(mmu_get_scsi_sgl)(sg,sz,sbus)
+#define mmu_release_scsi_one(vaddr,len,sbus) BTFIXUP_CALL(mmu_release_scsi_one)(vaddr,len,sbus)
+#define mmu_release_scsi_sgl(sg,sz,sbus) BTFIXUP_CALL(mmu_release_scsi_sgl)(sg,sz,sbus)
+
+/*
+ * mmu_map/unmap are provided by iommu/iounit; Invalid to call on IIep.
+ *
+ * The mmu_map_dma_area establishes two mappings in one go.
+ * These mappings point to pages normally mapped at 'va' (linear address).
+ * First mapping is for CPU visible address at 'a', uncached.
+ * This is an alias, but it works because it is an uncached mapping.
+ * Second mapping is for device visible address, or "bus" address.
+ * The bus address is returned at '*pba'.
+ *
+ * These functions seem distinct, but are hard to split. On sun4c,
+ * at least for now, 'a' is equal to bus address, and retured in *pba.
+ * On sun4m, page attributes depend on the CPU type, so we have to
+ * know if we are mapping RAM or I/O, so it has to be an additional argument
+ * to a separate mapping function for CPU visible mappings.
+ */
+BTFIXUPDEF_CALL(int,  mmu_map_dma_area, dma_addr_t *, unsigned long, unsigned long, int len)
+BTFIXUPDEF_CALL(struct page *, mmu_translate_dvma, unsigned long busa)
+BTFIXUPDEF_CALL(void,  mmu_unmap_dma_area, unsigned long busa, int len)
+
+#define mmu_map_dma_area(pba,va,a,len) BTFIXUP_CALL(mmu_map_dma_area)(pba,va,a,len)
+#define mmu_unmap_dma_area(ba,len) BTFIXUP_CALL(mmu_unmap_dma_area)(ba,len)
+#define mmu_translate_dvma(ba)     BTFIXUP_CALL(mmu_translate_dvma)(ba)
+
 #endif /* !(_ASM_SPARC_DMA_H) */

include/asm-sparc/pci.h

@@ -87,6 +87,12 @@ extern dma_addr_t pci_map_page(struct pci_dev *hwdev, struct page *page,
 extern void pci_unmap_page(struct pci_dev *hwdev,
 			dma_addr_t dma_address, size_t size, int direction);
 
+/* map_page and map_single cannot fail */
+static inline int pci_dma_mapping_error(dma_addr_t dma_addr)
+{
+	return 0;
+}
+
 /* Map a set of buffers described by scatterlist in streaming
  * mode for DMA.  This is the scather-gather version of the
  * above pci_map_single interface.  Here the scatter gather list

include/asm-sparc/pgtable.h

@@ -21,7 +21,6 @@
 #include <asm/pgtsrmmu.h>
 #include <asm/vac-ops.h>
 #include <asm/oplib.h>
-#include <asm/sbus.h>
 #include <asm/btfixup.h>
 #include <asm/system.h>
 
@@ -33,48 +32,6 @@ struct page;
 extern void load_mmu(void);
 extern unsigned long calc_highpages(void);
 
-/* Routines for data transfer buffers. */
-BTFIXUPDEF_CALL(char *, mmu_lockarea, char *, unsigned long)
-BTFIXUPDEF_CALL(void,   mmu_unlockarea, char *, unsigned long)
-
-#define mmu_lockarea(vaddr,len) BTFIXUP_CALL(mmu_lockarea)(vaddr,len)
-#define mmu_unlockarea(vaddr,len) BTFIXUP_CALL(mmu_unlockarea)(vaddr,len)
-
-/* These are implementations for sbus_map_sg/sbus_unmap_sg... collapse later */
-BTFIXUPDEF_CALL(__u32, mmu_get_scsi_one, char *, unsigned long, struct sbus_bus *sbus)
-BTFIXUPDEF_CALL(void,  mmu_get_scsi_sgl, struct scatterlist *, int, struct sbus_bus *sbus)
-BTFIXUPDEF_CALL(void,  mmu_release_scsi_one, __u32, unsigned long, struct sbus_bus *sbus)
-BTFIXUPDEF_CALL(void,  mmu_release_scsi_sgl, struct scatterlist *, int, struct sbus_bus *sbus)
-
-#define mmu_get_scsi_one(vaddr,len,sbus) BTFIXUP_CALL(mmu_get_scsi_one)(vaddr,len,sbus)
-#define mmu_get_scsi_sgl(sg,sz,sbus) BTFIXUP_CALL(mmu_get_scsi_sgl)(sg,sz,sbus)
-#define mmu_release_scsi_one(vaddr,len,sbus) BTFIXUP_CALL(mmu_release_scsi_one)(vaddr,len,sbus)
-#define mmu_release_scsi_sgl(sg,sz,sbus) BTFIXUP_CALL(mmu_release_scsi_sgl)(sg,sz,sbus)
-
-/*
- * mmu_map/unmap are provided by iommu/iounit; Invalid to call on IIep.
- *
- * The mmu_map_dma_area establishes two mappings in one go.
- * These mappings point to pages normally mapped at 'va' (linear address).
- * First mapping is for CPU visible address at 'a', uncached.
- * This is an alias, but it works because it is an uncached mapping.
- * Second mapping is for device visible address, or "bus" address.
- * The bus address is returned at '*pba'.
- *
- * These functions seem distinct, but are hard to split. On sun4c,
- * at least for now, 'a' is equal to bus address, and retured in *pba.
- * On sun4m, page attributes depend on the CPU type, so we have to
- * know if we are mapping RAM or I/O, so it has to be an additional argument
- * to a separate mapping function for CPU visible mappings.
- */
-BTFIXUPDEF_CALL(int,  mmu_map_dma_area, dma_addr_t *, unsigned long, unsigned long, int len)
-BTFIXUPDEF_CALL(struct page *, mmu_translate_dvma, unsigned long busa)
-BTFIXUPDEF_CALL(void,  mmu_unmap_dma_area, unsigned long busa, int len)
-
-#define mmu_map_dma_area(pba,va,a,len) BTFIXUP_CALL(mmu_map_dma_area)(pba,va,a,len)
-#define mmu_unmap_dma_area(ba,len) BTFIXUP_CALL(mmu_unmap_dma_area)(ba,len)
-#define mmu_translate_dvma(ba)     BTFIXUP_CALL(mmu_translate_dvma)(ba)
-
 BTFIXUPDEF_SIMM13(pgdir_shift)
 BTFIXUPDEF_SETHI(pgdir_size)
 BTFIXUPDEF_SETHI(pgdir_mask)

include/asm-sparc/pgtsun4.h

@@ -51,6 +51,7 @@
 #define _SUN4C_PAGE_NOCACHE      0x10000000   /* non-cacheable page */
 #define _SUN4C_PAGE_PRESENT      0x08000000   /* implemented in software */
 #define _SUN4C_PAGE_IO           0x04000000   /* I/O page */
+#define _SUN4C_PAGE_FILE         0x02000000   /* implemented in software */
 #define _SUN4C_PAGE_READ         0x00800000   /* implemented in software */
 #define _SUN4C_PAGE_WRITE        0x00400000   /* implemented in software */
 #define _SUN4C_PAGE_ACCESSED     0x00200000   /* implemented in software */
@@ -71,6 +72,21 @@
 #define SUN4C_PAGE_KERNEL	__pgprot(_SUN4C_READABLE|_SUN4C_WRITEABLE|\
 					 _SUN4C_PAGE_DIRTY|_SUN4C_PAGE_PRIV)
 
+/* SUN4C swap entry encoding
+ *
+ * We use 5 bits for the type and 19 for the offset.  This gives us
+ * 32 swapfiles of 4GB each.  Encoding looks like:
+ *
+ * RRRRRRRRooooooooooooooooooottttt
+ * fedcba9876543210fedcba9876543210
+ *
+ * The top 8 bits are reserved for protection and status bits, especially
+ * FILE and PRESENT.
+ */
+#define SUN4C_SWP_TYPE_MASK	0x1f
+#define SUN4C_SWP_OFF_MASK	0x7ffff
+#define SUN4C_SWP_OFF_SHIFT	5
+
 #ifndef __ASSEMBLY__
 
 static inline unsigned long sun4c_get_synchronous_error(void)

include/asm-sparc/sun4prom.h

@@ -25,7 +25,7 @@ typedef struct {
 	unsigned char	(*getchar)(void);	/* Get char from input device */ 
 	void		(*putchar)(char);	/* Put char to output device */
 	int		(*mayget)(void);	/* Maybe get char, or -1 */
-	int		(*mayput)(void);	/* Maybe put char, or -1 */
+	int		(*mayput)(int);		/* Maybe put char, or -1 */
 	unsigned char	*echo;			/* Should getchar echo? */
 	unsigned char	*insource;		/* Input source selector */
 	unsigned char	*outsink;		/* Output sink selector */