Merge tag 'leds_for_4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds

Pull LED updates from Jacek Anaszewski:

 - Move the out-of-LED-tree led-sead3 driver to the LED subsystem.

 - Add 'invert' sysfs attribute to the heartbeat trigger.

 - Add Device Tree support to the leds-netxbig driver and add related DT
   nodes to the kirkwood-netxbig.dtsi and kirkwood-net5big.dts files.
   Remove static LED setup from the related board files.

 - Remove redundant brightness conversion operation from leds-netxbig.

 - Improve leds-bcm6328 driver: improve default-state handling, add more
   init configuration options, print invalid LED instead of warning only
   about maximum LED value.

 - Add a shutdown function for setting gpio-leds into off state when
   shutting down.

 - Fix DT flash timeout property naming in leds-aat1290.txt.

 - Switch to using devm prefixed version of led_classdev_register()
   (leds-cobalt-qube, leds-hp6xx, leds-ot200, leds-ipaq-micro,
   leds-netxbig, leds-locomo, leds-menf21bmc, leds-net48xx, leds-wrap).

 - Add missing of_node_put (leds-powernv, leds-bcm6358, leds-bcm6328,
   leds-88pm860x).

 - Coding style fixes and cleanups: led-class/led-core, leds-ipaq-micro.

* tag 'leds_for_4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: (27 commits)
  leds: 88pm860x: add missing of_node_put
  leds: bcm6328: add missing of_node_put
  leds: bcm6358: add missing of_node_put
  powerpc/powernv: add missing of_node_put
  leds: leds-wrap.c: Use devm_led_classdev_register
  leds: aat1290: Fix property naming of flash-timeout-us
  leds: leds-net48xx: Use devm_led_classdev_register
  leds: leds-menf21bmc.c: Use devm_led_class_register
  leds: leds-locomo.c: Use devm_led_classdev_register
  leds: leds-gpio: add shutdown function
  Documentation: leds: update DT bindings for leds-bcm6328
  leds-bcm6328: add more init configuration options
  leds-bcm6328: simplify and improve default-state handling
  leds-bcm6328: print invalid LED
  leds: netxbig: set led_classdev max_brightness
  leds: netxbig: convert to use the devm_ functions
  ARM: mvebu: remove static LED setup for netxbig boards
  ARM: Kirkwood: add LED DT entries for netxbig boards
  leds: netxbig: add device tree binding
  leds: triggers: add invert to heartbeat
  ...

Documentation/devicetree/bindings/gpio/netxbig-gpio-ext.txt

+Binding for the GPIO extension bus found on some LaCie/Seagate boards
+(Example: 2Big/5Big Network v2, 2Big NAS).
+
+Required properties:
+- compatible: "lacie,netxbig-gpio-ext".
+- addr-gpios: GPIOs representing the address register (LSB -> MSB).
+- data-gpios: GPIOs representing the data register (LSB -> MSB).
+- enable-gpio: latches the new configuration (address, data) on raising edge.
+
+Example:
+
+netxbig_gpio_ext: netxbig-gpio-ext {
+	compatible = "lacie,netxbig-gpio-ext";
+
+	addr-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH
+		      &gpio1 16 GPIO_ACTIVE_HIGH
+		      &gpio1 17 GPIO_ACTIVE_HIGH>;
+	data-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH
+		      &gpio1 13 GPIO_ACTIVE_HIGH
+		      &gpio1 14 GPIO_ACTIVE_HIGH>;
+	enable-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+};

Documentation/devicetree/bindings/leds/leds-aat1290.txt

@@ -27,9 +27,9 @@ Required properties of the LED child node:
 - flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
                        Maximum flash LED supply current can be calculated using
                        following formula: I = 1A * 162kohm / Rset.
-- flash-timeout-us : see Documentation/devicetree/bindings/leds/common.txt
-                     Maximum flash timeout can be calculated using following
-                     formula: T = 8.82 * 10^9 * Ct.
+- flash-max-timeout-us : see Documentation/devicetree/bindings/leds/common.txt
+                         Maximum flash timeout can be calculated using following
+                         formula: T = 8.82 * 10^9 * Ct.
 
 Optional properties of the LED child node:
 - label : see Documentation/devicetree/bindings/leds/common.txt
@@ -54,7 +54,7 @@ aat1290 {
 		label = "aat1290-flash";
 		led-max-microamp = <520833>;
 		flash-max-microamp = <1012500>;
-		flash-timeout-us = <1940000>;
+		flash-max-timeout-us = <1940000>;
 	};
 };
 

Documentation/devicetree/bindings/leds/leds-bcm6328.txt

@@ -29,6 +29,14 @@ Required properties:
 Optional properties:
   - brcm,serial-leds : Boolean, enables Serial LEDs.
     Default : false
+  - brcm,serial-mux : Boolean, enables Serial LEDs multiplexing.
+    Default : false
+  - brcm,serial-clk-low : Boolean, makes clock signal active low.
+    Default : false
+  - brcm,serial-dat-low : Boolean, makes data signal active low.
+    Default : false
+  - brcm,serial-shift-inv : Boolean, inverts Serial LEDs shift direction.
+    Default : false
 
 Each LED is represented as a sub-node of the brcm,bcm6328-leds device.
 
@@ -110,6 +118,8 @@ Scenario 2 : BCM63268 with Serial/GPHY0 LEDs
 		#size-cells = <0>;
 		reg = <0x10001900 0x24>;
 		brcm,serial-leds;
+		brcm,serial-dat-low;
+		brcm,serial-shift-inv;
 
 		gphy0_spd0@0 {
 			reg = <0>;

Documentation/devicetree/bindings/leds/leds-netxbig.txt

+Binding for the CPLD LEDs (GPIO extension bus) found on some LaCie/Seagate
+boards (Example: 2Big/5Big Network v2, 2Big NAS).
+
+Required properties:
+- compatible: "lacie,netxbig-leds".
+- gpio-ext: Phandle for the gpio-ext bus.
+
+Optional properties:
+- timers: Timer array. Each timer entry is represented by three integers:
+  Mode (gpio-ext bus), delay_on and delay_off.
+
+Each LED is represented as a sub-node of the netxbig-leds device.
+
+Required sub-node properties:
+- mode-addr: Mode register address on gpio-ext bus.
+- mode-val: Mode to value mapping. Each entry is represented by two integers:
+  A mode and the corresponding value on the gpio-ext bus.
+- bright-addr: Brightness register address on gpio-ext bus.
+- max-brightness: Maximum brightness value.
+
+Optional sub-node properties:
+- label: Name for this LED. If omitted, the label is taken from the node name.
+- linux,default-trigger: Trigger assigned to the LED.
+
+Example:
+
+netxbig-leds {
+	compatible = "lacie,netxbig-leds";
+
+	gpio-ext = &gpio_ext;
+
+	timers = <NETXBIG_LED_TIMER1 500 500
+		  NETXBIG_LED_TIMER2 500 1000>;
+
+	blue-power {
+		label = "netxbig:blue:power";
+		mode-addr = <0>;
+		mode-val = <NETXBIG_LED_OFF 0
+			    NETXBIG_LED_ON 1
+			    NETXBIG_LED_TIMER1 3
+			    NETXBIG_LED_TIMER2 7>;
+		bright-addr = <1>;
+		max-brightness = <7>;
+	};
+	red-power {
+		label = "netxbig:red:power";
+		mode-addr = <0>;
+		mode-val = <NETXBIG_LED_OFF 0
+			    NETXBIG_LED_ON 2
+			    NETXBIG_LED_TIMER1 4>;
+		bright-addr = <1>;
+		max-brightness = <7>;
+	};
+	blue-sata0 {
+		label = "netxbig:blue:sata0";
+		mode-addr = <3>;
+		mode-val = <NETXBIG_LED_OFF 0
+			    NETXBIG_LED_ON 7
+			    NETXBIG_LED_SATA 1
+			    NETXBIG_LED_TIMER1 3>;
+		bright-addr = <2>;
+		max-brightness = <7>;
+	};
+	red-sata0 {
+		label = "netxbig:red:sata0";
+		mode-addr = <3>;
+		mode-val = <NETXBIG_LED_OFF 0
+			    NETXBIG_LED_ON 2
+			    NETXBIG_LED_TIMER1 4>;
+		bright-addr = <2>;
+		max-brightness = <7>;
+	};
+	blue-sata1 {
+		label = "netxbig:blue:sata1";
+		mode-addr = <4>;
+		mode-val = <NETXBIG_LED_OFF 0
+			    NETXBIG_LED_ON 7
+			    NETXBIG_LED_SATA 1
+			    NETXBIG_LED_TIMER1 3>;
+		bright-addr = <2>;
+		max-brightness = <7>;
+	};
+	red-sata1 {
+		label = "netxbig:red:sata1";
+		mode-addr = <4>;
+		mode-val = <NETXBIG_LED_OFF 0
+			    NETXBIG_LED_ON 2
+			    NETXBIG_LED_TIMER1 4>;
+		bright-addr = <2>;
+		max-brightness = <7>;
+	};
+};

arch/arm/boot/dts/kirkwood-net5big.dts

@@ -86,6 +86,66 @@ g762_clk: g762-oscillator {
 			 clock-frequency = <32768>;
 	       };
 	};
+
+	netxbig-leds {
+		blue-sata2 {
+			label = "netxbig:blue:sata2";
+			mode-addr = <5>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 7
+				    NETXBIG_LED_SATA 1
+				    NETXBIG_LED_TIMER1 3>;
+			bright-addr = <2>;
+			max-brightness = <7>;
+		};
+		red-sata2 {
+			label = "netxbig:red:sata2";
+			mode-addr = <5>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 2
+				    NETXBIG_LED_TIMER1 4>;
+			bright-addr = <2>;
+			max-brightness = <7>;
+		};
+		blue-sata3 {
+			label = "netxbig:blue:sata3";
+			mode-addr = <6>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 7
+				    NETXBIG_LED_SATA 1
+				    NETXBIG_LED_TIMER1 3>;
+			bright-addr = <2>;
+			max-brightness = <7>;
+		};
+		red-sata3 {
+			label = "netxbig:red:sata3";
+			mode-addr = <6>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 2
+				    NETXBIG_LED_TIMER1 4>;
+			bright-addr = <2>;
+			max-brightness = <7>;
+		};
+		blue-sata4 {
+			label = "netxbig:blue:sata4";
+			mode-addr = <7>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 7
+				    NETXBIG_LED_SATA 1
+				    NETXBIG_LED_TIMER1 3>;
+			bright-addr = <2>;
+			max-brightness = <7>;
+		};
+		red-sata4 {
+			label = "netxbig:red:sata4";
+			mode-addr = <7>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 2
+				    NETXBIG_LED_TIMER1 4>;
+			bright-addr = <2>;
+			max-brightness = <7>;
+		};
+	};
 };
 
 &mdio {

arch/arm/boot/dts/kirkwood-netxbig.dtsi

@@ -13,6 +13,7 @@
  * warranty of any kind, whether express or implied.
 */
 
+#include <dt-bindings/leds/leds-netxbig.h>
 #include "kirkwood.dtsi"
 #include "kirkwood-6281.dtsi"
 
@@ -105,6 +106,85 @@ regulator@1 {
 			gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>;
 		};
 	};
+
+	netxbig_gpio_ext: netxbig-gpio-ext {
+		compatible = "lacie,netxbig-gpio-ext";
+
+		addr-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH
+			      &gpio1 16 GPIO_ACTIVE_HIGH
+			      &gpio1 17 GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH
+			      &gpio1 13 GPIO_ACTIVE_HIGH
+			      &gpio1 14 GPIO_ACTIVE_HIGH>;
+		enable-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+	};
+
+	netxbig-leds {
+		compatible = "lacie,netxbig-leds";
+
+		gpio-ext = <&netxbig_gpio_ext>;
+
+		timers = <NETXBIG_LED_TIMER1 500 500
+			  NETXBIG_LED_TIMER2 500 1000>;
+
+		blue-power {
+			label = "netxbig:blue:power";
+			mode-addr = <0>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 1
+				    NETXBIG_LED_TIMER1 3
+				    NETXBIG_LED_TIMER2 7>;
+			bright-addr = <1>;
+			max-brightness = <7>;
+		};
+		red-power {
+			label = "netxbig:red:power";
+			mode-addr = <0>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 2
+				    NETXBIG_LED_TIMER1 4>;
+			bright-addr = <1>;
+			max-brightness = <7>;
+		};
+		blue-sata0 {
+			label = "netxbig:blue:sata0";
+			mode-addr = <3>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 7
+				    NETXBIG_LED_SATA 1
+				    NETXBIG_LED_TIMER1 3>;
+			bright-addr = <2>;
+			max-brightness = <7>;
+		};
+		red-sata0 {
+			label = "netxbig:red:sata0";
+			mode-addr = <3>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 2
+				    NETXBIG_LED_TIMER1 4>;
+			bright-addr = <2>;
+			max-brightness = <7>;
+		};
+		blue-sata1 {
+			label = "netxbig:blue:sata1";
+			mode-addr = <4>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 7
+				    NETXBIG_LED_SATA 1
+				    NETXBIG_LED_TIMER1 3>;
+			bright-addr = <2>;
+			max-brightness = <7>;
+		};
+		red-sata1 {
+			label = "netxbig:red:sata1";
+			mode-addr = <4>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 2
+				    NETXBIG_LED_TIMER1 4>;
+			bright-addr = <2>;
+			max-brightness = <7>;
+		};
+	};
 };
 
 &mdio {

arch/arm/mach-mvebu/Kconfig

@@ -117,11 +117,4 @@ config MACH_KIRKWOOD
 	  Say 'Y' here if you want your kernel to support boards based
 	  on the Marvell Kirkwood device tree.
 
-config MACH_NETXBIG
-	bool "LaCie 2Big and 5Big Network v2"
-	depends on MACH_KIRKWOOD
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  LaCie 2Big and 5Big Network v2
-
 endif

arch/arm/mach-mvebu/Makefile

@@ -13,4 +13,3 @@ endif
 
 obj-$(CONFIG_MACH_DOVE)		 += dove.o
 obj-$(CONFIG_MACH_KIRKWOOD)	 += kirkwood.o kirkwood-pm.o
-obj-$(CONFIG_MACH_NETXBIG)	 += netxbig.o

arch/arm/mach-mvebu/kirkwood.c

@@ -25,7 +25,6 @@
 #include "kirkwood.h"
 #include "kirkwood-pm.h"
 #include "common.h"
-#include "board.h"
 
 static struct resource kirkwood_cpufreq_resources[] = {
 	[0] = {
@@ -180,9 +179,6 @@ static void __init kirkwood_dt_init(void)
 	kirkwood_pm_init();
 	kirkwood_dt_eth_fixup();
 
-	if (of_machine_is_compatible("lacie,netxbig"))
-		netxbig_init();
-
 	of_platform_populate(NULL, of_default_bus_match_table, auxdata, NULL);
 }
 

arch/arm/mach-mvebu/netxbig.c

-/*
- * arch/arm/mach-mvbu/board-netxbig.c
- *
- * LaCie 2Big and 5Big Network v2 board setup
- *
- * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/leds-kirkwood-netxbig.h>
-#include "common.h"
-
-/*****************************************************************************
- * GPIO extension LEDs
- ****************************************************************************/
-
-/*
- * The LEDs are controlled by a CPLD and can be configured through a GPIO
- * extension bus:
- *
- * - address register : bit [0-2] -> GPIO [47-49]
- * - data register    : bit [0-2] -> GPIO [44-46]
- * - enable register  : GPIO 29
- */
-
-static int netxbig_v2_gpio_ext_addr[] = { 47, 48, 49 };
-static int netxbig_v2_gpio_ext_data[] = { 44, 45, 46 };
-
-static struct netxbig_gpio_ext netxbig_v2_gpio_ext = {
-	.addr		= netxbig_v2_gpio_ext_addr,
-	.num_addr	= ARRAY_SIZE(netxbig_v2_gpio_ext_addr),
-	.data		= netxbig_v2_gpio_ext_data,
-	.num_data	= ARRAY_SIZE(netxbig_v2_gpio_ext_data),
-	.enable		= 29,
-};
-
-/*
- * Address register selection:
- *
- * addr | register
- * ----------------------------
- *   0  | front LED
- *   1  | front LED brightness
- *   2  | SATA LED brightness
- *   3  | SATA0 LED
- *   4  | SATA1 LED
- *   5  | SATA2 LED
- *   6  | SATA3 LED
- *   7  | SATA4 LED
- *
- * Data register configuration:
- *
- * data | LED brightness
- * -------------------------------------------------
- *   0  | min (off)
- *   -  | -
- *   7  | max
- *
- * data | front LED mode
- * -------------------------------------------------
- *   0  | fix off
- *   1  | fix blue on
- *   2  | fix red on
- *   3  | blink blue on=1 sec and blue off=1 sec
- *   4  | blink red on=1 sec and red off=1 sec
- *   5  | blink blue on=2.5 sec and red on=0.5 sec
- *   6  | blink blue on=1 sec and red on=1 sec
- *   7  | blink blue on=0.5 sec and blue off=2.5 sec
- *
- * data | SATA LED mode
- * -------------------------------------------------
- *   0  | fix off
- *   1  | SATA activity blink
- *   2  | fix red on
- *   3  | blink blue on=1 sec and blue off=1 sec
- *   4  | blink red on=1 sec and red off=1 sec
- *   5  | blink blue on=2.5 sec and red on=0.5 sec
- *   6  | blink blue on=1 sec and red on=1 sec
- *   7  | fix blue on
- */
-
-static int netxbig_v2_red_mled[NETXBIG_LED_MODE_NUM] = {
-	[NETXBIG_LED_OFF]	= 0,
-	[NETXBIG_LED_ON]	= 2,
-	[NETXBIG_LED_SATA]	= NETXBIG_LED_INVALID_MODE,
-	[NETXBIG_LED_TIMER1]	= 4,
-	[NETXBIG_LED_TIMER2]	= NETXBIG_LED_INVALID_MODE,
-};
-
-static int netxbig_v2_blue_pwr_mled[NETXBIG_LED_MODE_NUM] = {
-	[NETXBIG_LED_OFF]	= 0,
-	[NETXBIG_LED_ON]	= 1,
-	[NETXBIG_LED_SATA]	= NETXBIG_LED_INVALID_MODE,
-	[NETXBIG_LED_TIMER1]	= 3,
-	[NETXBIG_LED_TIMER2]	= 7,
-};
-
-static int netxbig_v2_blue_sata_mled[NETXBIG_LED_MODE_NUM] = {
-	[NETXBIG_LED_OFF]	= 0,
-	[NETXBIG_LED_ON]	= 7,
-	[NETXBIG_LED_SATA]	= 1,
-	[NETXBIG_LED_TIMER1]	= 3,
-	[NETXBIG_LED_TIMER2]	= NETXBIG_LED_INVALID_MODE,
-};
-
-static struct netxbig_led_timer netxbig_v2_led_timer[] = {
-	[0] = {
-		.delay_on	= 500,
-		.delay_off	= 500,
-		.mode		= NETXBIG_LED_TIMER1,
-	},
-	[1] = {
-		.delay_on	= 500,
-		.delay_off	= 1000,
-		.mode		= NETXBIG_LED_TIMER2,
-	},
-};
-
-#define NETXBIG_LED(_name, maddr, mval, baddr)			\
-	{ .name		= _name,				\
-	  .mode_addr	= maddr,				\
-	  .mode_val	= mval,					\
-	  .bright_addr	= baddr }
-
-static struct netxbig_led net2big_v2_leds_ctrl[] = {
-	NETXBIG_LED("net2big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled,  1),
-	NETXBIG_LED("net2big-v2:red:power",  0, netxbig_v2_red_mled,       1),
-	NETXBIG_LED("net2big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2),
-	NETXBIG_LED("net2big-v2:red:sata0",  3, netxbig_v2_red_mled,       2),
-	NETXBIG_LED("net2big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2),
-	NETXBIG_LED("net2big-v2:red:sata1",  4, netxbig_v2_red_mled,       2),
-};
-
-static struct netxbig_led_platform_data net2big_v2_leds_data = {
-	.gpio_ext	= &netxbig_v2_gpio_ext,
-	.timer		= netxbig_v2_led_timer,
-	.num_timer	= ARRAY_SIZE(netxbig_v2_led_timer),
-	.leds		= net2big_v2_leds_ctrl,
-	.num_leds	= ARRAY_SIZE(net2big_v2_leds_ctrl),
-};
-
-static struct netxbig_led net5big_v2_leds_ctrl[] = {
-	NETXBIG_LED("net5big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled,  1),
-	NETXBIG_LED("net5big-v2:red:power",  0, netxbig_v2_red_mled,       1),
-	NETXBIG_LED("net5big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2),
-	NETXBIG_LED("net5big-v2:red:sata0",  3, netxbig_v2_red_mled,       2),
-	NETXBIG_LED("net5big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2),
-	NETXBIG_LED("net5big-v2:red:sata1",  4, netxbig_v2_red_mled,       2),
-	NETXBIG_LED("net5big-v2:blue:sata2", 5, netxbig_v2_blue_sata_mled, 2),
-	NETXBIG_LED("net5big-v2:red:sata2",  5, netxbig_v2_red_mled,       2),
-	NETXBIG_LED("net5big-v2:blue:sata3", 6, netxbig_v2_blue_sata_mled, 2),
-	NETXBIG_LED("net5big-v2:red:sata3",  6, netxbig_v2_red_mled,       2),
-	NETXBIG_LED("net5big-v2:blue:sata4", 7, netxbig_v2_blue_sata_mled, 2),
-	NETXBIG_LED("net5big-v2:red:sata4",  7, netxbig_v2_red_mled,       2),
-};
-
-static struct netxbig_led_platform_data net5big_v2_leds_data = {
-	.gpio_ext	= &netxbig_v2_gpio_ext,
-	.timer		= netxbig_v2_led_timer,
-	.num_timer	= ARRAY_SIZE(netxbig_v2_led_timer),
-	.leds		= net5big_v2_leds_ctrl,
-	.num_leds	= ARRAY_SIZE(net5big_v2_leds_ctrl),
-};
-
-static struct platform_device netxbig_v2_leds = {
-	.name		= "leds-netxbig",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &net2big_v2_leds_data,
-	},
-};
-
-void __init netxbig_init(void)
-{
-
-	if (of_machine_is_compatible("lacie,net5big_v2"))
-		netxbig_v2_leds.dev.platform_data = &net5big_v2_leds_data;
-	platform_device_register(&netxbig_v2_leds);
-}

arch/mips/mti-sead3/Makefile

@@ -12,6 +12,4 @@ obj-y				:= sead3-lcd.o sead3-display.o sead3-init.o \
 				   sead3-int.o sead3-platform.o sead3-reset.o \
 				   sead3-setup.o sead3-time.o
 
-obj-y				+= leds-sead3.o
-
 obj-$(CONFIG_EARLY_PRINTK)	+= sead3-console.o

drivers/leds/Kconfig

@@ -556,6 +556,16 @@ config LEDS_KTD2692
 
 	  Say Y to enable this driver.
 
+config LEDS_SEAD3
+	tristate "LED support for the MIPS SEAD 3 board"
+	depends on LEDS_CLASS && MIPS_SEAD3
+	help
+	  Say Y here to include support for the FLED and PLED LEDs on SEAD3 eval
+	  boards.
+
+	  This driver can also be built as a module. If so the module
+	  will be called leds-sead3.
+
 comment "LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)"
 
 config LEDS_BLINKM

drivers/leds/Makefile

@@ -65,6 +65,7 @@ obj-$(CONFIG_LEDS_VERSATILE)		+= leds-versatile.o
 obj-$(CONFIG_LEDS_MENF21BMC)		+= leds-menf21bmc.o
 obj-$(CONFIG_LEDS_KTD2692)		+= leds-ktd2692.o
 obj-$(CONFIG_LEDS_POWERNV)		+= leds-powernv.o
+obj-$(CONFIG_LEDS_SEAD3)		+= leds-sead3.o
 
 # LED SPI Drivers
 obj-$(CONFIG_LEDS_DAC124S085)		+= leds-dac124s085.o

drivers/leds/led-class.c

@@ -102,70 +102,6 @@ static const struct attribute_group *led_groups[] = {
 	NULL,
 };
 
-static void led_timer_function(unsigned long data)
-{
-	struct led_classdev *led_cdev = (void *)data;
-	unsigned long brightness;
-	unsigned long delay;
-
-	if (!led_cdev->blink_delay_on || !led_cdev->blink_delay_off) {
-		led_set_brightness_async(led_cdev, LED_OFF);
-		return;
-	}
-
-	if (led_cdev->flags & LED_BLINK_ONESHOT_STOP) {
-		led_cdev->flags &= ~LED_BLINK_ONESHOT_STOP;
-		return;
-	}
-
-	brightness = led_get_brightness(led_cdev);
-	if (!brightness) {
-		/* Time to switch the LED on. */
-		if (led_cdev->delayed_set_value) {
-			led_cdev->blink_brightness =
-					led_cdev->delayed_set_value;
-			led_cdev->delayed_set_value = 0;
-		}
-		brightness = led_cdev->blink_brightness;
-		delay = led_cdev->blink_delay_on;
-	} else {
-		/* Store the current brightness value to be able
-		 * to restore it when the delay_off period is over.
-		 */
-		led_cdev->blink_brightness = brightness;
-		brightness = LED_OFF;
-		delay = led_cdev->blink_delay_off;
-	}
-
-	led_set_brightness_async(led_cdev, brightness);
-
-	/* Return in next iteration if led is in one-shot mode and we are in
-	 * the final blink state so that the led is toggled each delay_on +
-	 * delay_off milliseconds in worst case.
-	 */
-	if (led_cdev->flags & LED_BLINK_ONESHOT) {
-		if (led_cdev->flags & LED_BLINK_INVERT) {
-			if (brightness)
-				led_cdev->flags |= LED_BLINK_ONESHOT_STOP;
-		} else {
-			if (!brightness)
-				led_cdev->flags |= LED_BLINK_ONESHOT_STOP;
-		}
-	}
-
-	mod_timer(&led_cdev->blink_timer, jiffies + msecs_to_jiffies(delay));
-}
-
-static void set_brightness_delayed(struct work_struct *ws)
-{
-	struct led_classdev *led_cdev =
-		container_of(ws, struct led_classdev, set_brightness_work);
-
-	led_stop_software_blink(led_cdev);
-
-	led_set_brightness_async(led_cdev, led_cdev->delayed_set_value);
-}
-
 /**
  * led_classdev_suspend - suspend an led_classdev.
  * @led_cdev: the led_classdev to suspend.
@@ -283,10 +219,7 @@ int led_classdev_register(struct device *parent, struct led_classdev *led_cdev)
 
 	led_update_brightness(led_cdev);
 
-	INIT_WORK(&led_cdev->set_brightness_work, set_brightness_delayed);
-
-	setup_timer(&led_cdev->blink_timer, led_timer_function,
-		    (unsigned long)led_cdev);
+	led_init_core(led_cdev);
 
 #ifdef CONFIG_LEDS_TRIGGERS
 	led_trigger_set_default(led_cdev);

drivers/leds/led-core.c

@@ -25,6 +25,70 @@ EXPORT_SYMBOL_GPL(leds_list_lock);
 LIST_HEAD(leds_list);
 EXPORT_SYMBOL_GPL(leds_list);
 
+static void led_timer_function(unsigned long data)
+{
+	struct led_classdev *led_cdev = (void *)data;
+	unsigned long brightness;
+	unsigned long delay;
+
+	if (!led_cdev->blink_delay_on || !led_cdev->blink_delay_off) {
+		led_set_brightness_async(led_cdev, LED_OFF);
+		return;
+	}
+
+	if (led_cdev->flags & LED_BLINK_ONESHOT_STOP) {
+		led_cdev->flags &= ~LED_BLINK_ONESHOT_STOP;
+		return;
+	}
+
+	brightness = led_get_brightness(led_cdev);
+	if (!brightness) {
+		/* Time to switch the LED on. */
+		if (led_cdev->delayed_set_value) {
+			led_cdev->blink_brightness =
+					led_cdev->delayed_set_value;
+			led_cdev->delayed_set_value = 0;
+		}
+		brightness = led_cdev->blink_brightness;
+		delay = led_cdev->blink_delay_on;
+	} else {
+		/* Store the current brightness value to be able
+		 * to restore it when the delay_off period is over.
+		 */
+		led_cdev->blink_brightness = brightness;
+		brightness = LED_OFF;
+		delay = led_cdev->blink_delay_off;
+	}
+
+	led_set_brightness_async(led_cdev, brightness);
+
+	/* Return in next iteration if led is in one-shot mode and we are in
+	 * the final blink state so that the led is toggled each delay_on +
+	 * delay_off milliseconds in worst case.
+	 */
+	if (led_cdev->flags & LED_BLINK_ONESHOT) {
+		if (led_cdev->flags & LED_BLINK_INVERT) {
+			if (brightness)
+				led_cdev->flags |= LED_BLINK_ONESHOT_STOP;
+		} else {
+			if (!brightness)
+				led_cdev->flags |= LED_BLINK_ONESHOT_STOP;
+		}
+	}
+
+	mod_timer(&led_cdev->blink_timer, jiffies + msecs_to_jiffies(delay));
+}
+
+static void set_brightness_delayed(struct work_struct *ws)
+{
+	struct led_classdev *led_cdev =
+		container_of(ws, struct led_classdev, set_brightness_work);
+
+	led_stop_software_blink(led_cdev);
+
+	led_set_brightness_async(led_cdev, led_cdev->delayed_set_value);
+}
+
 static void led_set_software_blink(struct led_classdev *led_cdev,
 				   unsigned long delay_on,
 				   unsigned long delay_off)
@@ -72,6 +136,15 @@ static void led_blink_setup(struct led_classdev *led_cdev,
 	led_set_software_blink(led_cdev, *delay_on, *delay_off);
 }
 
+void led_init_core(struct led_classdev *led_cdev)
+{
+	INIT_WORK(&led_cdev->set_brightness_work, set_brightness_delayed);
+
+	setup_timer(&led_cdev->blink_timer, led_timer_function,
+		    (unsigned long)led_cdev);
+}
+EXPORT_SYMBOL_GPL(led_init_core);
+
 void led_blink_set(struct led_classdev *led_cdev,
 		   unsigned long *delay_on,
 		   unsigned long *delay_off)

drivers/leds/leds-88pm860x.c

@@ -142,6 +142,7 @@ static int pm860x_led_dt_init(struct platform_device *pdev,
 			of_property_read_u32(np, "marvell,88pm860x-iset",
 					     &iset);
 			data->iset = PM8606_LED_CURRENT(iset);
+			of_node_put(np);
 			break;
 		}
 	}

drivers/leds/leds-bcm6328.c

@@ -41,6 +41,11 @@
 #define BCM6328_SERIAL_LED_SHIFT_DIR	BIT(16)
 #define BCM6328_LED_SHIFT_TEST		BIT(30)
 #define BCM6328_LED_TEST		BIT(31)
+#define BCM6328_INIT_MASK		(BCM6328_SERIAL_LED_EN | \
+					 BCM6328_SERIAL_LED_MUX  | \
+					 BCM6328_SERIAL_LED_CLK_NPOL | \
+					 BCM6328_SERIAL_LED_DATA_PPOL | \
+					 BCM6328_SERIAL_LED_SHIFT_DIR)
 
 #define BCM6328_LED_MODE_MASK		3
 #define BCM6328_LED_MODE_OFF		0
@@ -281,11 +286,10 @@ static int bcm6328_led(struct device *dev, struct device_node *nc, u32 reg,
 						    "linux,default-trigger",
 						    NULL);
 
+	spin_lock_irqsave(lock, flags);
 	if (!of_property_read_string(nc, "default-state", &state)) {
-		spin_lock_irqsave(lock, flags);
 		if (!strcmp(state, "on")) {
 			led->cdev.brightness = LED_FULL;
-			bcm6328_led_mode(led, BCM6328_LED_MODE_ON);
 		} else if (!strcmp(state, "keep")) {
 			void __iomem *mode;
 			unsigned long val, shift;
@@ -296,21 +300,28 @@ static int bcm6328_led(struct device *dev, struct device_node *nc, u32 reg,
 			else
 				mode = mem + BCM6328_REG_MODE_LO;
 
-			val = bcm6328_led_read(mode) >> (shift % 16);
+			val = bcm6328_led_read(mode) >>
+			      BCM6328_LED_SHIFT(shift % 16);
 			val &= BCM6328_LED_MODE_MASK;
-			if (val == BCM6328_LED_MODE_ON)
+			if ((led->active_low && val == BCM6328_LED_MODE_ON) ||
+			    (!led->active_low && val == BCM6328_LED_MODE_OFF))
 				led->cdev.brightness = LED_FULL;
-			else {
+			else
 				led->cdev.brightness = LED_OFF;
-				bcm6328_led_mode(led, BCM6328_LED_MODE_OFF);
-			}
 		} else {
 			led->cdev.brightness = LED_OFF;
-			bcm6328_led_mode(led, BCM6328_LED_MODE_OFF);
 		}
-		spin_unlock_irqrestore(lock, flags);
+	} else {
+		led->cdev.brightness = LED_OFF;
 	}
 
+	if ((led->active_low && led->cdev.brightness == LED_FULL) ||
+	    (!led->active_low && led->cdev.brightness == LED_OFF))
+		bcm6328_led_mode(led, BCM6328_LED_MODE_ON);
+	else
+		bcm6328_led_mode(led, BCM6328_LED_MODE_OFF);
+	spin_unlock_irqrestore(lock, flags);
+
 	led->cdev.brightness_set = bcm6328_led_set;
 	led->cdev.blink_set = bcm6328_blink_set;
 
@@ -360,9 +371,17 @@ static int bcm6328_leds_probe(struct platform_device *pdev)
 	bcm6328_led_write(mem + BCM6328_REG_LNKACTSEL_LO, 0);
 
 	val = bcm6328_led_read(mem + BCM6328_REG_INIT);
-	val &= ~BCM6328_SERIAL_LED_EN;
+	val &= ~(BCM6328_INIT_MASK);
 	if (of_property_read_bool(np, "brcm,serial-leds"))
 		val |= BCM6328_SERIAL_LED_EN;
+	if (of_property_read_bool(np, "brcm,serial-mux"))
+		val |= BCM6328_SERIAL_LED_MUX;
+	if (of_property_read_bool(np, "brcm,serial-clk-low"))
+		val |= BCM6328_SERIAL_LED_CLK_NPOL;
+	if (!of_property_read_bool(np, "brcm,serial-dat-low"))
+		val |= BCM6328_SERIAL_LED_DATA_PPOL;
+	if (!of_property_read_bool(np, "brcm,serial-shift-inv"))
+		val |= BCM6328_SERIAL_LED_SHIFT_DIR;
 	bcm6328_led_write(mem + BCM6328_REG_INIT, val);
 
 	for_each_available_child_of_node(np, child) {
@@ -373,7 +392,7 @@ static int bcm6328_leds_probe(struct platform_device *pdev)
 			continue;
 
 		if (reg >= BCM6328_LED_MAX_COUNT) {
-			dev_err(dev, "invalid LED (>= %d)\n",
+			dev_err(dev, "invalid LED (%u >= %d)\n", reg,
 				BCM6328_LED_MAX_COUNT);
 			continue;
 		}
@@ -384,8 +403,10 @@ static int bcm6328_leds_probe(struct platform_device *pdev)
 			rc = bcm6328_led(dev, child, reg, mem, lock,
 					 blink_leds, blink_delay);
 
-		if (rc < 0)
+		if (rc < 0) {
+			of_node_put(child);
 			return rc;
+		}
 	}
 
 	return 0;

drivers/leds/leds-bcm6358.c

@@ -215,8 +215,10 @@ static int bcm6358_leds_probe(struct platform_device *pdev)
 		}
 
 		rc = bcm6358_led(dev, child, reg, mem, lock);
-		if (rc < 0)
+		if (rc < 0) {
+			of_node_put(child);
 			return rc;
+		}
 	}
 
 	return 0;

drivers/leds/leds-cobalt-qube.c

@@ -36,7 +36,6 @@ static struct led_classdev qube_front_led = {
 static int cobalt_qube_led_probe(struct platform_device *pdev)
 {
 	struct resource *res;
-	int retval;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res)
@@ -49,31 +48,11 @@ static int cobalt_qube_led_probe(struct platform_device *pdev)
 	led_value = LED_FRONT_LEFT | LED_FRONT_RIGHT;
 	writeb(led_value, led_port);
 
-	retval = led_classdev_register(&pdev->dev, &qube_front_led);
-	if (retval)
-		goto err_null;
-
-	return 0;
-
-err_null:
-	led_port = NULL;
-
-	return retval;
-}
-
-static int cobalt_qube_led_remove(struct platform_device *pdev)
-{
-	led_classdev_unregister(&qube_front_led);
-
-	if (led_port)
-		led_port = NULL;
-
-	return 0;
+	return devm_led_classdev_register(&pdev->dev, &qube_front_led);
 }
 
 static struct platform_driver cobalt_qube_led_driver = {
 	.probe	= cobalt_qube_led_probe,
-	.remove	= cobalt_qube_led_remove,
 	.driver	= {
 		.name	= "cobalt-qube-leds",
 	},

drivers/leds/leds-gpio.c

@@ -291,9 +291,22 @@ static int gpio_led_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static void gpio_led_shutdown(struct platform_device *pdev)
+{
+	struct gpio_leds_priv *priv = platform_get_drvdata(pdev);
+	int i;
+
+	for (i = 0; i < priv->num_leds; i++) {
+		struct gpio_led_data *led = &priv->leds[i];
+
+		gpio_led_set(&led->cdev, LED_OFF);
+	}
+}
+
 static struct platform_driver gpio_led_driver = {
 	.probe		= gpio_led_probe,
 	.remove		= gpio_led_remove,
+	.shutdown	= gpio_led_shutdown,
 	.driver		= {
 		.name	= "leds-gpio",
 		.of_match_table = of_gpio_leds_match,

drivers/leds/leds-hp6xx.c

@@ -59,28 +59,15 @@ static int hp6xxled_probe(struct platform_device *pdev)
 {
 	int ret;
 
-	ret = led_classdev_register(&pdev->dev, &hp6xx_red_led);
+	ret = devm_led_classdev_register(&pdev->dev, &hp6xx_red_led);
 	if (ret < 0)
 		return ret;
 
-	ret = led_classdev_register(&pdev->dev, &hp6xx_green_led);
-	if (ret < 0)
-		led_classdev_unregister(&hp6xx_red_led);
-
-	return ret;
-}
-
-static int hp6xxled_remove(struct platform_device *pdev)
-{
-	led_classdev_unregister(&hp6xx_red_led);
-	led_classdev_unregister(&hp6xx_green_led);
-
-	return 0;
+	return devm_led_classdev_register(&pdev->dev, &hp6xx_green_led);
 }
 
 static struct platform_driver hp6xxled_driver = {
 	.probe		= hp6xxled_probe,
-	.remove		= hp6xxled_remove,
 	.driver		= {
 		.name		= "hp6xx-led",
 	},

drivers/leds/leds-ipaq-micro.c

@@ -16,9 +16,9 @@
 #define LED_YELLOW	0x00
 #define LED_GREEN	0x01
 
-#define LED_EN          (1 << 4)        /* LED ON/OFF 0:off, 1:on                       */
-#define LED_AUTOSTOP    (1 << 5)        /* LED ON/OFF auto stop set 0:disable, 1:enable */
-#define LED_ALWAYS      (1 << 6)        /* LED Interrupt Mask 0:No mask, 1:mask         */
+#define LED_EN       (1 << 4) /* LED ON/OFF 0:off, 1:on                       */
+#define LED_AUTOSTOP (1 << 5) /* LED ON/OFF auto stop set 0:disable, 1:enable */
+#define LED_ALWAYS   (1 << 6) /* LED Interrupt Mask 0:No mask, 1:mask         */
 
 static void micro_leds_brightness_set(struct led_classdev *led_cdev,
 				      enum led_brightness value)
@@ -79,14 +79,14 @@ static int micro_leds_blink_set(struct led_classdev *led_cdev,
 	};
 
 	msg.tx_data[0] = LED_GREEN;
-        if (*delay_on > IPAQ_LED_MAX_DUTY ||
+	if (*delay_on > IPAQ_LED_MAX_DUTY ||
 	    *delay_off > IPAQ_LED_MAX_DUTY)
-                return -EINVAL;
+		return -EINVAL;
 
-        if (*delay_on == 0 && *delay_off == 0) {
-                *delay_on = 100;
-                *delay_off = 100;
-        }
+	if (*delay_on == 0 && *delay_off == 0) {
+		*delay_on = 100;
+		*delay_off = 100;
+	}
 
 	msg.tx_data[1] = 0;
 	if (*delay_on >= IPAQ_LED_MAX_DUTY)
@@ -111,7 +111,7 @@ static int micro_leds_probe(struct platform_device *pdev)
 {
 	int ret;
 
-	ret = led_classdev_register(&pdev->dev, &micro_led);
+	ret = devm_led_classdev_register(&pdev->dev, &micro_led);
 	if (ret) {
 		dev_err(&pdev->dev, "registering led failed: %d\n", ret);
 		return ret;
@@ -121,18 +121,11 @@ static int micro_leds_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int micro_leds_remove(struct platform_device *pdev)
-{
-	led_classdev_unregister(&micro_led);
-	return 0;
-}
-
 static struct platform_driver micro_leds_device_driver = {
 	.driver = {
 		.name    = "ipaq-micro-leds",
 	},
 	.probe   = micro_leds_probe,
-	.remove  = micro_leds_remove,
 };
 module_platform_driver(micro_leds_device_driver);
 

drivers/leds/leds-locomo.c

@@ -59,23 +59,13 @@ static int locomoled_probe(struct locomo_dev *ldev)
 {
 	int ret;
 
-	ret = led_classdev_register(&ldev->dev, &locomo_led0);
+	ret = devm_led_classdev_register(&ldev->dev, &locomo_led0);
 	if (ret < 0)
 		return ret;
 
-	ret = led_classdev_register(&ldev->dev, &locomo_led1);
-	if (ret < 0)
-		led_classdev_unregister(&locomo_led0);
-
-	return ret;
+	return  devm_led_classdev_register(&ldev->dev, &locomo_led1);
 }
 
-static int locomoled_remove(struct locomo_dev *dev)
-{
-	led_classdev_unregister(&locomo_led0);
-	led_classdev_unregister(&locomo_led1);
-	return 0;
-}
 
 static struct locomo_driver locomoled_driver = {
 	.drv = {
@@ -83,7 +73,6 @@ static struct locomo_driver locomoled_driver = {
 	},
 	.devid	= LOCOMO_DEVID_LED,
 	.probe	= locomoled_probe,
-	.remove	= locomoled_remove,
 };
 
 static int __init locomoled_init(void)

drivers/leds/leds-menf21bmc.c

@@ -87,36 +87,20 @@ static int menf21bmc_led_probe(struct platform_device *pdev)
 		leds[i].cdev.name = leds[i].name;
 		leds[i].cdev.brightness_set = menf21bmc_led_set;
 		leds[i].i2c_client = i2c_client;
-		ret = led_classdev_register(&pdev->dev, &leds[i].cdev);
-		if (ret < 0)
-			goto err_free_leds;
+		ret = devm_led_classdev_register(&pdev->dev, &leds[i].cdev);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "failed to register LED device\n");
+			return ret;
+		}
 	}
 	dev_info(&pdev->dev, "MEN 140F21P00 BMC LED device enabled\n");
 
 	return 0;
 
-err_free_leds:
-	dev_err(&pdev->dev, "failed to register LED device\n");
-
-	for (i = i - 1; i >= 0; i--)
-		led_classdev_unregister(&leds[i].cdev);
-
-	return ret;
-}
-
-static int menf21bmc_led_remove(struct platform_device *pdev)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(leds); i++)
-		led_classdev_unregister(&leds[i].cdev);
-
-	return 0;
 }
 
 static struct platform_driver menf21bmc_led = {
 	.probe		= menf21bmc_led_probe,
-	.remove		= menf21bmc_led_remove,
 	.driver		= {
 		.name		= "menf21bmc_led",
 	},

drivers/leds/leds-net48xx.c

@@ -39,18 +39,11 @@ static struct led_classdev net48xx_error_led = {
 
 static int net48xx_led_probe(struct platform_device *pdev)
 {
-	return led_classdev_register(&pdev->dev, &net48xx_error_led);
-}
-
-static int net48xx_led_remove(struct platform_device *pdev)
-{
-	led_classdev_unregister(&net48xx_error_led);
-	return 0;
+	return devm_led_classdev_register(&pdev->dev, &net48xx_error_led);
 }
 
 static struct platform_driver net48xx_led_driver = {
 	.probe		= net48xx_led_probe,
-	.remove		= net48xx_led_remove,
 	.driver		= {
 		.name		= DRVNAME,
 	},

drivers/leds/leds-netxbig.c

@@ -26,6 +26,7 @@
 #include <linux/spinlock.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
+#include <linux/of_gpio.h>
 #include <linux/leds.h>
 #include <linux/platform_data/leds-kirkwood-netxbig.h>
 
@@ -70,7 +71,8 @@ static void gpio_ext_set_value(struct netxbig_gpio_ext *gpio_ext,
 	spin_unlock_irqrestore(&gpio_ext_lock, flags);
 }
 
-static int gpio_ext_init(struct netxbig_gpio_ext *gpio_ext)
+static int gpio_ext_init(struct platform_device *pdev,
+			 struct netxbig_gpio_ext *gpio_ext)
 {
 	int err;
 	int i;
@@ -80,46 +82,28 @@ static int gpio_ext_init(struct netxbig_gpio_ext *gpio_ext)
 
 	/* Configure address GPIOs. */
 	for (i = 0; i < gpio_ext->num_addr; i++) {
-		err = gpio_request_one(gpio_ext->addr[i], GPIOF_OUT_INIT_LOW,
-				       "GPIO extension addr");
+		err = devm_gpio_request_one(&pdev->dev, gpio_ext->addr[i],
+					    GPIOF_OUT_INIT_LOW,
+					    "GPIO extension addr");
 		if (err)
-			goto err_free_addr;
+			return err;
 	}
 	/* Configure data GPIOs. */
 	for (i = 0; i < gpio_ext->num_data; i++) {
-		err = gpio_request_one(gpio_ext->data[i], GPIOF_OUT_INIT_LOW,
-				   "GPIO extension data");
+		err = devm_gpio_request_one(&pdev->dev, gpio_ext->data[i],
+					    GPIOF_OUT_INIT_LOW,
+					    "GPIO extension data");
 		if (err)
-			goto err_free_data;
+			return err;
 	}
 	/* Configure "enable select" GPIO. */
-	err = gpio_request_one(gpio_ext->enable, GPIOF_OUT_INIT_LOW,
-			       "GPIO extension enable");
+	err = devm_gpio_request_one(&pdev->dev, gpio_ext->enable,
+				    GPIOF_OUT_INIT_LOW,
+				    "GPIO extension enable");
 	if (err)
-		goto err_free_data;
+		return err;
 
 	return 0;
-
-err_free_data:
-	for (i = i - 1; i >= 0; i--)
-		gpio_free(gpio_ext->data[i]);
-	i = gpio_ext->num_addr;
-err_free_addr:
-	for (i = i - 1; i >= 0; i--)
-		gpio_free(gpio_ext->addr[i]);
-
-	return err;
-}
-
-static void gpio_ext_free(struct netxbig_gpio_ext *gpio_ext)
-{
-	int i;
-
-	gpio_free(gpio_ext->enable);
-	for (i = gpio_ext->num_addr - 1; i >= 0; i--)
-		gpio_free(gpio_ext->addr[i]);
-	for (i = gpio_ext->num_data - 1; i >= 0; i--)
-		gpio_free(gpio_ext->data[i]);
 }
 
 /*
@@ -132,7 +116,6 @@ struct netxbig_led_data {
 	int			mode_addr;
 	int			*mode_val;
 	int			bright_addr;
-	int			bright_max;
 	struct			netxbig_led_timer *timer;
 	int			num_timer;
 	enum netxbig_led_mode	mode;
@@ -194,7 +177,7 @@ static void netxbig_led_set(struct led_classdev *led_cdev,
 	struct netxbig_led_data *led_dat =
 		container_of(led_cdev, struct netxbig_led_data, cdev);
 	enum netxbig_led_mode mode;
-	int mode_val, bright_val;
+	int mode_val;
 	int set_brightness = 1;
 	unsigned long flags;
 
@@ -220,12 +203,9 @@ static void netxbig_led_set(struct led_classdev *led_cdev,
 	 * SATA LEDs. So, change the brightness setting for a single
 	 * SATA LED will affect all the others.
 	 */
-	if (set_brightness) {
-		bright_val = DIV_ROUND_UP(value * led_dat->bright_max,
-					  LED_FULL);
+	if (set_brightness)
 		gpio_ext_set_value(led_dat->gpio_ext,
-				   led_dat->bright_addr, bright_val);
-	}
+				   led_dat->bright_addr, value);
 
 	spin_unlock_irqrestore(&led_dat->lock, flags);
 }
@@ -299,18 +279,11 @@ static struct attribute *netxbig_led_attrs[] = {
 };
 ATTRIBUTE_GROUPS(netxbig_led);
 
-static void delete_netxbig_led(struct netxbig_led_data *led_dat)
+static int create_netxbig_led(struct platform_device *pdev,
+			      struct netxbig_led_platform_data *pdata,
+			      struct netxbig_led_data *led_dat,
+			      const struct netxbig_led *template)
 {
-	led_classdev_unregister(&led_dat->cdev);
-}
-
-static int
-create_netxbig_led(struct platform_device *pdev,
-		   struct netxbig_led_data *led_dat,
-		   const struct netxbig_led *template)
-{
-	struct netxbig_led_platform_data *pdata = dev_get_platdata(&pdev->dev);
-
 	spin_lock_init(&led_dat->lock);
 	led_dat->gpio_ext = pdata->gpio_ext;
 	led_dat->cdev.name = template->name;
@@ -329,11 +302,11 @@ create_netxbig_led(struct platform_device *pdev,
 	 */
 	led_dat->sata = 0;
 	led_dat->cdev.brightness = LED_OFF;
+	led_dat->cdev.max_brightness = template->bright_max;
 	led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
 	led_dat->mode_addr = template->mode_addr;
 	led_dat->mode_val = template->mode_val;
 	led_dat->bright_addr = template->bright_addr;
-	led_dat->bright_max = (1 << pdata->gpio_ext->num_data) - 1;
 	led_dat->timer = pdata->timer;
 	led_dat->num_timer = pdata->num_timer;
 	/*
@@ -343,67 +316,274 @@ create_netxbig_led(struct platform_device *pdev,
 	if (led_dat->mode_val[NETXBIG_LED_SATA] != NETXBIG_LED_INVALID_MODE)
 		led_dat->cdev.groups = netxbig_led_groups;
 
-	return led_classdev_register(&pdev->dev, &led_dat->cdev);
+	return devm_led_classdev_register(&pdev->dev, &led_dat->cdev);
 }
 
-static int netxbig_led_probe(struct platform_device *pdev)
+#ifdef CONFIG_OF_GPIO
+static int gpio_ext_get_of_pdata(struct device *dev, struct device_node *np,
+				 struct netxbig_gpio_ext *gpio_ext)
 {
-	struct netxbig_led_platform_data *pdata = dev_get_platdata(&pdev->dev);
-	struct netxbig_led_data *leds_data;
-	int i;
+	int *addr, *data;
+	int num_addr, num_data;
 	int ret;
+	int i;
 
-	if (!pdata)
-		return -EINVAL;
-
-	leds_data = devm_kzalloc(&pdev->dev,
-		sizeof(struct netxbig_led_data) * pdata->num_leds, GFP_KERNEL);
-	if (!leds_data)
+	ret = of_gpio_named_count(np, "addr-gpios");
+	if (ret < 0) {
+		dev_err(dev,
+			"Failed to count GPIOs in DT property addr-gpios\n");
+		return ret;
+	}
+	num_addr = ret;
+	addr = devm_kzalloc(dev, num_addr * sizeof(*addr), GFP_KERNEL);
+	if (!addr)
 		return -ENOMEM;
 
-	ret = gpio_ext_init(pdata->gpio_ext);
-	if (ret < 0)
+	for (i = 0; i < num_addr; i++) {
+		ret = of_get_named_gpio(np, "addr-gpios", i);
+		if (ret < 0)
+			return ret;
+		addr[i] = ret;
+	}
+	gpio_ext->addr = addr;
+	gpio_ext->num_addr = num_addr;
+
+	ret = of_gpio_named_count(np, "data-gpios");
+	if (ret < 0) {
+		dev_err(dev,
+			"Failed to count GPIOs in DT property data-gpios\n");
 		return ret;
+	}
+	num_data = ret;
+	data = devm_kzalloc(dev, num_data * sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
 
-	for (i = 0; i < pdata->num_leds; i++) {
-		ret = create_netxbig_led(pdev, &leds_data[i], &pdata->leds[i]);
+	for (i = 0; i < num_data; i++) {
+		ret = of_get_named_gpio(np, "data-gpios", i);
 		if (ret < 0)
-			goto err_free_leds;
+			return ret;
+		data[i] = ret;
 	}
+	gpio_ext->data = data;
+	gpio_ext->num_data = num_data;
 
-	platform_set_drvdata(pdev, leds_data);
+	ret = of_get_named_gpio(np, "enable-gpio", 0);
+	if (ret < 0) {
+		dev_err(dev,
+			"Failed to get GPIO from DT property enable-gpio\n");
+		return ret;
+	}
+	gpio_ext->enable = ret;
 
 	return 0;
+}
+
+static int netxbig_leds_get_of_pdata(struct device *dev,
+				     struct netxbig_led_platform_data *pdata)
+{
+	struct device_node *np = dev->of_node;
+	struct device_node *gpio_ext_np;
+	struct device_node *child;
+	struct netxbig_gpio_ext *gpio_ext;
+	struct netxbig_led_timer *timers;
+	struct netxbig_led *leds, *led;
+	int num_timers;
+	int num_leds = 0;
+	int ret;
+	int i;
 
-err_free_leds:
-	for (i = i - 1; i >= 0; i--)
-		delete_netxbig_led(&leds_data[i]);
+	/* GPIO extension */
+	gpio_ext_np = of_parse_phandle(np, "gpio-ext", 0);
+	if (!gpio_ext_np) {
+		dev_err(dev, "Failed to get DT handle gpio-ext\n");
+		return -EINVAL;
+	}
 
-	gpio_ext_free(pdata->gpio_ext);
+	gpio_ext = devm_kzalloc(dev, sizeof(*gpio_ext), GFP_KERNEL);
+	if (!gpio_ext)
+		return -ENOMEM;
+	ret = gpio_ext_get_of_pdata(dev, gpio_ext_np, gpio_ext);
+	if (ret)
+		return ret;
+	of_node_put(gpio_ext_np);
+	pdata->gpio_ext = gpio_ext;
+
+	/* Timers (optional) */
+	ret = of_property_count_u32_elems(np, "timers");
+	if (ret > 0) {
+		if (ret % 3)
+			return -EINVAL;
+		num_timers = ret / 3;
+		timers = devm_kzalloc(dev, num_timers * sizeof(*timers),
+				      GFP_KERNEL);
+		if (!timers)
+			return -ENOMEM;
+		for (i = 0; i < num_timers; i++) {
+			u32 tmp;
+
+			of_property_read_u32_index(np, "timers", 3 * i,
+						   &timers[i].mode);
+			if (timers[i].mode >= NETXBIG_LED_MODE_NUM)
+				return -EINVAL;
+			of_property_read_u32_index(np, "timers",
+						   3 * i + 1, &tmp);
+			timers[i].delay_on = tmp;
+			of_property_read_u32_index(np, "timers",
+						   3 * i + 2, &tmp);
+			timers[i].delay_off = tmp;
+		}
+		pdata->timer = timers;
+		pdata->num_timer = num_timers;
+	}
+
+	/* LEDs */
+	num_leds = of_get_child_count(np);
+	if (!num_leds) {
+		dev_err(dev, "No LED subnodes found in DT\n");
+		return -ENODEV;
+	}
+
+	leds = devm_kzalloc(dev, num_leds * sizeof(*leds), GFP_KERNEL);
+	if (!leds)
+		return -ENOMEM;
+
+	led = leds;
+	for_each_child_of_node(np, child) {
+		const char *string;
+		int *mode_val;
+		int num_modes;
+
+		ret = of_property_read_u32(child, "mode-addr",
+					   &led->mode_addr);
+		if (ret)
+			goto err_node_put;
+
+		ret = of_property_read_u32(child, "bright-addr",
+					   &led->bright_addr);
+		if (ret)
+			goto err_node_put;
+
+		ret = of_property_read_u32(child, "max-brightness",
+					   &led->bright_max);
+		if (ret)
+			goto err_node_put;
+
+		mode_val =
+			devm_kzalloc(dev,
+				     NETXBIG_LED_MODE_NUM * sizeof(*mode_val),
+				     GFP_KERNEL);
+		if (!mode_val) {
+			ret = -ENOMEM;
+			goto err_node_put;
+		}
+
+		for (i = 0; i < NETXBIG_LED_MODE_NUM; i++)
+			mode_val[i] = NETXBIG_LED_INVALID_MODE;
+
+		ret = of_property_count_u32_elems(child, "mode-val");
+		if (ret < 0 || ret % 2) {
+			ret = -EINVAL;
+			goto err_node_put;
+		}
+		num_modes = ret / 2;
+		if (num_modes > NETXBIG_LED_MODE_NUM) {
+			ret = -EINVAL;
+			goto err_node_put;
+		}
+
+		for (i = 0; i < num_modes; i++) {
+			int mode;
+			int val;
+
+			of_property_read_u32_index(child,
+						   "mode-val", 2 * i, &mode);
+			of_property_read_u32_index(child,
+						   "mode-val", 2 * i + 1, &val);
+			if (mode >= NETXBIG_LED_MODE_NUM) {
+				ret = -EINVAL;
+				goto err_node_put;
+			}
+			mode_val[mode] = val;
+		}
+		led->mode_val = mode_val;
+
+		if (!of_property_read_string(child, "label", &string))
+			led->name = string;
+		else
+			led->name = child->name;
+
+		if (!of_property_read_string(child,
+					     "linux,default-trigger", &string))
+			led->default_trigger = string;
+
+		led++;
+	}
+
+	pdata->leds = leds;
+	pdata->num_leds = num_leds;
+
+	return 0;
+
+err_node_put:
+	of_node_put(child);
 	return ret;
 }
 
-static int netxbig_led_remove(struct platform_device *pdev)
+static const struct of_device_id of_netxbig_leds_match[] = {
+	{ .compatible = "lacie,netxbig-leds", },
+	{},
+};
+#else
+static inline int
+netxbig_leds_get_of_pdata(struct device *dev,
+			  struct netxbig_led_platform_data *pdata)
+{
+	return -ENODEV;
+}
+#endif /* CONFIG_OF_GPIO */
+
+static int netxbig_led_probe(struct platform_device *pdev)
 {
 	struct netxbig_led_platform_data *pdata = dev_get_platdata(&pdev->dev);
 	struct netxbig_led_data *leds_data;
 	int i;
+	int ret;
 
-	leds_data = platform_get_drvdata(pdev);
+	if (!pdata) {
+		pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+		if (!pdata)
+			return -ENOMEM;
+		ret = netxbig_leds_get_of_pdata(&pdev->dev, pdata);
+		if (ret)
+			return ret;
+	}
+
+	leds_data = devm_kzalloc(&pdev->dev,
+				 pdata->num_leds * sizeof(*leds_data),
+				 GFP_KERNEL);
+	if (!leds_data)
+		return -ENOMEM;
 
-	for (i = 0; i < pdata->num_leds; i++)
-		delete_netxbig_led(&leds_data[i]);
+	ret = gpio_ext_init(pdev, pdata->gpio_ext);
+	if (ret < 0)
+		return ret;
 
-	gpio_ext_free(pdata->gpio_ext);
+	for (i = 0; i < pdata->num_leds; i++) {
+		ret = create_netxbig_led(pdev, pdata,
+					 &leds_data[i], &pdata->leds[i]);
+		if (ret < 0)
+			return ret;
+	}
 
 	return 0;
 }
 
 static struct platform_driver netxbig_led_driver = {
 	.probe		= netxbig_led_probe,
-	.remove		= netxbig_led_remove,
 	.driver		= {
-		.name	= "leds-netxbig",
+		.name		= "leds-netxbig",
+		.of_match_table	= of_match_ptr(of_netxbig_leds_match),
 	},
 };
 

drivers/leds/leds-ot200.c

@@ -124,9 +124,9 @@ static int ot200_led_probe(struct platform_device *pdev)
 		leds[i].cdev.name = leds[i].name;
 		leds[i].cdev.brightness_set = ot200_led_brightness_set;
 
-		ret = led_classdev_register(&pdev->dev, &leds[i].cdev);
+		ret = devm_led_classdev_register(&pdev->dev, &leds[i].cdev);
 		if (ret < 0)
-			goto err;
+			return ret;
 	}
 
 	leds_front = 0;		/* turn off all front leds */
@@ -135,27 +135,10 @@ static int ot200_led_probe(struct platform_device *pdev)
 	outb(leds_back, 0x5a);
 
 	return 0;
-
-err:
-	for (i = i - 1; i >= 0; i--)
-		led_classdev_unregister(&leds[i].cdev);
-
-	return ret;
-}
-
-static int ot200_led_remove(struct platform_device *pdev)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(leds); i++)
-		led_classdev_unregister(&leds[i].cdev);
-
-	return 0;
 }
 
 static struct platform_driver ot200_led_driver = {
 	.probe		= ot200_led_probe,
-	.remove		= ot200_led_remove,
 	.driver		= {
 		.name	= "leds-ot200",
 	},

drivers/leds/leds-powernv.c

@@ -262,15 +262,19 @@ static int powernv_led_classdev(struct platform_device *pdev,
 		while ((cur = of_prop_next_string(p, cur)) != NULL) {
 			powernv_led = devm_kzalloc(dev, sizeof(*powernv_led),
 						   GFP_KERNEL);
-			if (!powernv_led)
+			if (!powernv_led) {
+				of_node_put(np);
 				return -ENOMEM;
+			}
 
 			powernv_led->common = powernv_led_common;
 			powernv_led->loc_code = (char *)np->name;
 
 			rc = powernv_led_create(dev, powernv_led, cur);
-			if (rc)
+			if (rc) {
+				of_node_put(np);
 				return rc;
+			}
 		} /* while end */
 	}
 

arch/mips/mti-sead3/leds-sead3.c → drivers/leds/leds-sead3.c

@@ -59,6 +59,7 @@ static int sead3_led_remove(struct platform_device *pdev)
 {
 	led_classdev_unregister(&sead3_pled);
 	led_classdev_unregister(&sead3_fled);
+
 	return 0;
 }
 

drivers/leds/leds-wrap.c

@@ -76,39 +76,19 @@ static int wrap_led_probe(struct platform_device *pdev)
 {
 	int ret;
 
-	ret = led_classdev_register(&pdev->dev, &wrap_power_led);
+	ret = devm_led_classdev_register(&pdev->dev, &wrap_power_led);
 	if (ret < 0)
 		return ret;
 
-	ret = led_classdev_register(&pdev->dev, &wrap_error_led);
+	ret = devm_led_classdev_register(&pdev->dev, &wrap_error_led);
 	if (ret < 0)
-		goto err1;
-
-	ret = led_classdev_register(&pdev->dev, &wrap_extra_led);
-	if (ret < 0)
-		goto err2;
-
-	return ret;
-
-err2:
-	led_classdev_unregister(&wrap_error_led);
-err1:
-	led_classdev_unregister(&wrap_power_led);
-
-	return ret;
-}
+		return ret;
 
-static int wrap_led_remove(struct platform_device *pdev)
-{
-	led_classdev_unregister(&wrap_power_led);
-	led_classdev_unregister(&wrap_error_led);
-	led_classdev_unregister(&wrap_extra_led);
-	return 0;
+	return  devm_led_classdev_register(&pdev->dev, &wrap_extra_led);
 }
 
 static struct platform_driver wrap_led_driver = {
 	.probe		= wrap_led_probe,
-	.remove		= wrap_led_remove,
 	.driver		= {
 		.name		= DRVNAME,
 	},

drivers/leds/leds.h

@@ -44,6 +44,7 @@ static inline int led_get_brightness(struct led_classdev *led_cdev)
 	return led_cdev->brightness;
 }
 
+void led_init_core(struct led_classdev *led_cdev);
 void led_stop_software_blink(struct led_classdev *led_cdev);
 
 extern struct rw_semaphore leds_list_lock;

drivers/leds/trigger/ledtrig-heartbeat.c

@@ -27,6 +27,7 @@ struct heartbeat_trig_data {
 	unsigned int phase;
 	unsigned int period;
 	struct timer_list timer;
+	unsigned int invert;
 };
 
 static void led_heartbeat_function(unsigned long data)
@@ -56,21 +57,27 @@ static void led_heartbeat_function(unsigned long data)
 			msecs_to_jiffies(heartbeat_data->period);
 		delay = msecs_to_jiffies(70);
 		heartbeat_data->phase++;
-		brightness = led_cdev->max_brightness;
+		if (!heartbeat_data->invert)
+			brightness = led_cdev->max_brightness;
 		break;
 	case 1:
 		delay = heartbeat_data->period / 4 - msecs_to_jiffies(70);
 		heartbeat_data->phase++;
+		if (heartbeat_data->invert)
+			brightness = led_cdev->max_brightness;
 		break;
 	case 2:
 		delay = msecs_to_jiffies(70);
 		heartbeat_data->phase++;
-		brightness = led_cdev->max_brightness;
+		if (!heartbeat_data->invert)
+			brightness = led_cdev->max_brightness;
 		break;
 	default:
 		delay = heartbeat_data->period - heartbeat_data->period / 4 -
 			msecs_to_jiffies(70);
 		heartbeat_data->phase = 0;
+		if (heartbeat_data->invert)
+			brightness = led_cdev->max_brightness;
 		break;
 	}
 
@@ -78,15 +85,50 @@ static void led_heartbeat_function(unsigned long data)
 	mod_timer(&heartbeat_data->timer, jiffies + delay);
 }
 
+static ssize_t led_invert_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct heartbeat_trig_data *heartbeat_data = led_cdev->trigger_data;
+
+	return sprintf(buf, "%u\n", heartbeat_data->invert);
+}
+
+static ssize_t led_invert_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t size)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct heartbeat_trig_data *heartbeat_data = led_cdev->trigger_data;
+	unsigned long state;
+	int ret;
+
+	ret = kstrtoul(buf, 0, &state);
+	if (ret)
+		return ret;
+
+	heartbeat_data->invert = !!state;
+
+	return size;
+}
+
+static DEVICE_ATTR(invert, 0644, led_invert_show, led_invert_store);
+
 static void heartbeat_trig_activate(struct led_classdev *led_cdev)
 {
 	struct heartbeat_trig_data *heartbeat_data;
+	int rc;
 
 	heartbeat_data = kzalloc(sizeof(*heartbeat_data), GFP_KERNEL);
 	if (!heartbeat_data)
 		return;
 
 	led_cdev->trigger_data = heartbeat_data;
+	rc = device_create_file(led_cdev->dev, &dev_attr_invert);
+	if (rc) {
+		kfree(led_cdev->trigger_data);
+		return;
+	}
+
 	setup_timer(&heartbeat_data->timer,
 		    led_heartbeat_function, (unsigned long) led_cdev);
 	heartbeat_data->phase = 0;
@@ -100,6 +142,7 @@ static void heartbeat_trig_deactivate(struct led_classdev *led_cdev)
 
 	if (led_cdev->activated) {
 		del_timer_sync(&heartbeat_data->timer);
+		device_remove_file(led_cdev->dev, &dev_attr_invert);
 		kfree(heartbeat_data);
 		led_cdev->activated = false;
 	}

arch/arm/mach-mvebu/board.h → include/dt-bindings/leds/leds-netxbig.h

 /*
- * Board functions for Marvell System On Chip
- *
- * Copyright (C) 2014
- *
- * Andrew Lunn <andrew@lunn.ch>
+ * This header provides constants for netxbig LED bindings.
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
 
-#ifndef __ARCH_MVEBU_BOARD_H
-#define __ARCH_MVEBU_BOARD_H
+#ifndef _DT_BINDINGS_LEDS_NETXBIG_H
+#define _DT_BINDINGS_LEDS_NETXBIG_H
+
+#define NETXBIG_LED_OFF		0
+#define NETXBIG_LED_ON		1
+#define NETXBIG_LED_SATA	2
+#define NETXBIG_LED_TIMER1	3
+#define NETXBIG_LED_TIMER2	4
 
-#ifdef CONFIG_MACH_NETXBIG
-void netxbig_init(void);
-#else
-static inline void netxbig_init(void) {};
-#endif
-#endif
+#endif /* _DT_BINDINGS_LEDS_NETXBIG_H */

include/linux/platform_data/leds-kirkwood-netxbig.h

@@ -40,6 +40,7 @@ struct netxbig_led {
 	int		mode_addr;
 	int		*mode_val;
 	int		bright_addr;
+	int		bright_max;
 };
 
 struct netxbig_led_platform_data {