Skip to content

L
linux
Commit e8aabc47 authored by Chen, Kenneth W's avatar Chen, Kenneth W Committed by Tony Luck
Browse files
Options

[IA64] polish comments for tlb fault handler in ivt.S 

Polish the comments specifically in vhpt_miss and nested_dtlb_miss
handlers.  I think it's better to explicitly name each page table
level with its name instead of numerically name them.  i.e., use
pgd, pud, pmd, and pte instead of referring as L1, L2, L3 etc.
Along the line, remove some magic number in the comments like:
"PTA + (((IFA(61,63) << 7) | IFA(33,39))*8)".  No code change at
all, pure comment update.  Feel free to shoot anything you have,
darts or tomahawk cruise missile.  I will duck behind a bunker ;-)
Signed-off-by: default avatarKen Chen <kenneth.w.chen@intel.com>
Acked-by: default avatarRobin Holt <holt@sgi.com>
Signed-off-by: default avatarTony Luck <tony.luck@intel.com>
parent fedb25fa
Show whitespace changes
Inline Side-by-side
Showing with 71 additions and 62 deletions
arch/ia64/kernel/ivt.S
View file @ e8aabc47
......@@ -91,16 +91,17 @@ ENTRY(vhpt_miss)
* (the "original") TLB miss, which may either be caused by an instruction
* fetch or a data access (or non-access).
*
* What we do here is normal TLB miss handing for the _original_ miss, followed
* by inserting the TLB entry for the virtual page table page that the VHPT
* walker was attempting to access. The latter gets inserted as long
* as both L1 and L2 have valid mappings for the faulting address.
* The TLB entry for the original miss gets inserted only if
* the L3 entry indicates that the page is present.
* What we do here is normal TLB miss handing for the _original_ miss,
* followed by inserting the TLB entry for the virtual page table page
* that the VHPT walker was attempting to access. The latter gets
* inserted as long as page table entry above pte level have valid
* mappings for the faulting address. The TLB entry for the original
* miss gets inserted only if the pte entry indicates that the page is
* present.
*
* do_page_fault gets invoked in the following cases:
* - the faulting virtual address uses unimplemented address bits
* - the faulting virtual address has no L1, L2, or L3 mapping
* - the faulting virtual address has no valid page table mapping
*/
mov r16=cr.ifa // get address that caused the TLB miss
#ifdef CONFIG_HUGETLB_PAGE
......@@ -126,7 +127,7 @@ ENTRY(vhpt_miss)
#endif
;;
cmp.eq p6,p7=5,r17 // is IFA pointing into to region 5?
shr.u r18=r22,PGDIR_SHIFT // get bits 33-63 of the faulting address
shr.u r18=r22,PGDIR_SHIFT // get bottom portion of pgd index bit
;;
(p7) dep r17=r17,r19,(PAGE_SHIFT-3),3 // put region number bits in place
......@@ -137,38 +138,38 @@ ENTRY(vhpt_miss)
(p6) shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT
(p7) shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT-3
;;
(p6) dep r17=r18,r19,3,(PAGE_SHIFT-3) // r17=PTA + IFA(33,42)*8
(p7) dep r17=r18,r17,3,(PAGE_SHIFT-6) // r17=PTA + (((IFA(61,63) << 7) | IFA(33,39))*8)
(p6) dep r17=r18,r19,3,(PAGE_SHIFT-3) // r17=pgd_offset for region 5
(p7) dep r17=r18,r17,3,(PAGE_SHIFT-6) // r17=pgd_offset for region[0-4]
cmp.eq p7,p6=0,r21 // unused address bits all zeroes?
#ifdef CONFIG_PGTABLE_4
shr.u r28=r22,PUD_SHIFT // shift L2 index into position
shr.u r28=r22,PUD_SHIFT // shift pud index into position
#else
shr.u r18=r22,PMD_SHIFT // shift L3 index into position
shr.u r18=r22,PMD_SHIFT // shift pmd index into position
#endif
;;
ld8 r17=[r17] // fetch the L1 entry (may be 0)
ld8 r17=[r17] // get *pgd (may be 0)
;;
(p7) cmp.eq p6,p7=r17,r0 // was L1 entry NULL?
(p7) cmp.eq p6,p7=r17,r0 // was pgd_present(*pgd) == NULL?
#ifdef CONFIG_PGTABLE_4
dep r28=r28,r17,3,(PAGE_SHIFT-3) // compute address of L2 page table entry
dep r28=r28,r17,3,(PAGE_SHIFT-3) // r28=pud_offset(pgd,addr)
;;
shr.u r18=r22,PMD_SHIFT // shift L3 index into position
(p7) ld8 r29=[r28] // fetch the L2 entry (may be 0)
shr.u r18=r22,PMD_SHIFT // shift pmd index into position
(p7) ld8 r29=[r28] // get *pud (may be 0)
;;
(p7) cmp.eq.or.andcm p6,p7=r29,r0 // was L2 entry NULL?
dep r17=r18,r29,3,(PAGE_SHIFT-3) // compute address of L3 page table entry
(p7) cmp.eq.or.andcm p6,p7=r29,r0 // was pud_present(*pud) == NULL?
dep r17=r18,r29,3,(PAGE_SHIFT-3) // r17=pmd_offset(pud,addr)
#else
dep r17=r18,r17,3,(PAGE_SHIFT-3) // compute address of L3 page table entry
dep r17=r18,r17,3,(PAGE_SHIFT-3) // r17=pmd_offset(pgd,addr)
#endif
;;
(p7) ld8 r20=[r17] // fetch the L3 entry (may be 0)
shr.u r19=r22,PAGE_SHIFT // shift L4 index into position
(p7) ld8 r20=[r17] // get *pmd (may be 0)
shr.u r19=r22,PAGE_SHIFT // shift pte index into position
;;
(p7) cmp.eq.or.andcm p6,p7=r20,r0 // was L3 entry NULL?
dep r21=r19,r20,3,(PAGE_SHIFT-3) // compute address of L4 page table entry
(p7) cmp.eq.or.andcm p6,p7=r20,r0 // was pmd_present(*pmd) == NULL?
dep r21=r19,r20,3,(PAGE_SHIFT-3) // r21=pte_offset(pmd,addr)
;;
(p7) ld8 r18=[r21] // read the L4 PTE
mov r19=cr.isr // cr.isr bit 0 tells us if this is an insn miss
(p7) ld8 r18=[r21] // read *pte
mov r19=cr.isr // cr.isr bit 32 tells us if this is an insn miss
;;
(p7) tbit.z p6,p7=r18,_PAGE_P_BIT // page present bit cleared?
mov r22=cr.iha // get the VHPT address that caused the TLB miss
......@@ -202,25 +203,33 @@ ENTRY(vhpt_miss)
dv_serialize_data
/*
* Re-check L2 and L3 pagetable. If they changed, we may have received a ptc.g
* Re-check pagetable entry. If they changed, we may have received a ptc.g
* between reading the pagetable and the "itc". If so, flush the entry we
* inserted and retry.
* inserted and retry. At this point, we have:
*
* r28 = equivalent of pud_offset(pgd, ifa)
* r17 = equivalent of pmd_offset(pud, ifa)
* r21 = equivalent of pte_offset(pmd, ifa)
*
* r29 = *pud
* r20 = *pmd
* r18 = *pte
*/
ld8 r25=[r21] // read L4 entry again
ld8 r26=[r17] // read L3 PTE again
ld8 r25=[r21] // read *pte again
ld8 r26=[r17] // read *pmd again
#ifdef CONFIG_PGTABLE_4
ld8 r19=[r28] // read L2 entry again
ld8 r19=[r28] // read *pud again
#endif
cmp.ne p6,p7=r0,r0
;;
cmp.ne.or.andcm p6,p7=r26,r20 // did L3 entry change
cmp.ne.or.andcm p6,p7=r26,r20 // did *pmd change
#ifdef CONFIG_PGTABLE_4
cmp.ne.or.andcm p6,p7=r19,r29 // did L4 PTE change
cmp.ne.or.andcm p6,p7=r19,r29 // did *pud change
#endif
mov r27=PAGE_SHIFT<<2
;;
(p6) ptc.l r22,r27 // purge PTE page translation
(p7) cmp.ne.or.andcm p6,p7=r25,r18 // did L4 PTE change
(p7) cmp.ne.or.andcm p6,p7=r25,r18 // did *pte change
;;
(p6) ptc.l r16,r27 // purge translation
#endif
......@@ -235,19 +244,19 @@ END(vhpt_miss)
ENTRY(itlb_miss)
DBG_FAULT(1)
/*
* The ITLB handler accesses the L3 PTE via the virtually mapped linear
* The ITLB handler accesses the PTE via the virtually mapped linear
* page table. If a nested TLB miss occurs, we switch into physical
* mode, walk the page table, and then re-execute the L3 PTE read
* and go on normally after that.
* mode, walk the page table, and then re-execute the PTE read and
* go on normally after that.
*/
mov r16=cr.ifa // get virtual address
mov r29=b0 // save b0
mov r31=pr // save predicates
.itlb_fault:
mov r17=cr.iha // get virtual address of L3 PTE
mov r17=cr.iha // get virtual address of PTE
movl r30=1f // load nested fault continuation point
;;
1: ld8 r18=[r17] // read L3 PTE
1: ld8 r18=[r17] // read *pte
;;
mov b0=r29
tbit.z p6,p0=r18,_PAGE_P_BIT // page present bit cleared?
......@@ -262,7 +271,7 @@ ENTRY(itlb_miss)
*/
dv_serialize_data
ld8 r19=[r17] // read L3 PTE again and see if same
ld8 r19=[r17] // read *pte again and see if same
mov r20=PAGE_SHIFT<<2 // setup page size for purge
;;
cmp.ne p7,p0=r18,r19
......@@ -279,19 +288,19 @@ END(itlb_miss)
ENTRY(dtlb_miss)
DBG_FAULT(2)
/*
* The DTLB handler accesses the L3 PTE via the virtually mapped linear
* The DTLB handler accesses the PTE via the virtually mapped linear
* page table. If a nested TLB miss occurs, we switch into physical
* mode, walk the page table, and then re-execute the L3 PTE read
* and go on normally after that.
* mode, walk the page table, and then re-execute the PTE read and
* go on normally after that.
*/
mov r16=cr.ifa // get virtual address
mov r29=b0 // save b0
mov r31=pr // save predicates
dtlb_fault:
mov r17=cr.iha // get virtual address of L3 PTE
mov r17=cr.iha // get virtual address of PTE
movl r30=1f // load nested fault continuation point
;;
1: ld8 r18=[r17] // read L3 PTE
1: ld8 r18=[r17] // read *pte
;;
mov b0=r29
tbit.z p6,p0=r18,_PAGE_P_BIT // page present bit cleared?
......@@ -306,7 +315,7 @@ dtlb_fault:
*/
dv_serialize_data
ld8 r19=[r17] // read L3 PTE again and see if same
ld8 r19=[r17] // read *pte again and see if same
mov r20=PAGE_SHIFT<<2 // setup page size for purge
;;
cmp.ne p7,p0=r18,r19
......@@ -420,7 +429,7 @@ ENTRY(nested_dtlb_miss)
* r30: continuation address
* r31: saved pr
*
* Output: r17: physical address of L3 PTE of faulting address
* Output: r17: physical address of PTE of faulting address
* r29: saved b0
* r30: continuation address
* r31: saved pr
......@@ -450,33 +459,33 @@ ENTRY(nested_dtlb_miss)
(p6) shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT
(p7) shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT-3
;;
(p6) dep r17=r18,r19,3,(PAGE_SHIFT-3) // r17=PTA + IFA(33,42)*8
(p7) dep r17=r18,r17,3,(PAGE_SHIFT-6) // r17=PTA + (((IFA(61,63) << 7) | IFA(33,39))*8)
(p6) dep r17=r18,r19,3,(PAGE_SHIFT-3) // r17=pgd_offset for region 5
(p7) dep r17=r18,r17,3,(PAGE_SHIFT-6) // r17=pgd_offset for region[0-4]
cmp.eq p7,p6=0,r21 // unused address bits all zeroes?
#ifdef CONFIG_PGTABLE_4
shr.u r18=r22,PUD_SHIFT // shift L2 index into position
shr.u r18=r22,PUD_SHIFT // shift pud index into position
#else
shr.u r18=r22,PMD_SHIFT // shift L3 index into position
shr.u r18=r22,PMD_SHIFT // shift pmd index into position
#endif
;;
ld8 r17=[r17] // fetch the L1 entry (may be 0)
ld8 r17=[r17] // get *pgd (may be 0)
;;
(p7) cmp.eq p6,p7=r17,r0 // was L1 entry NULL?
dep r17=r18,r17,3,(PAGE_SHIFT-3) // compute address of L2 page table entry
(p7) cmp.eq p6,p7=r17,r0 // was pgd_present(*pgd) == NULL?
dep r17=r18,r17,3,(PAGE_SHIFT-3) // r17=p[u|m]d_offset(pgd,addr)
;;
#ifdef CONFIG_PGTABLE_4
(p7) ld8 r17=[r17] // fetch the L2 entry (may be 0)
shr.u r18=r22,PMD_SHIFT // shift L3 index into position
(p7) ld8 r17=[r17] // get *pud (may be 0)
shr.u r18=r22,PMD_SHIFT // shift pmd index into position
;;
(p7) cmp.eq.or.andcm p6,p7=r17,r0 // was L2 entry NULL?
dep r17=r18,r17,3,(PAGE_SHIFT-3) // compute address of L2 page table entry
(p7) cmp.eq.or.andcm p6,p7=r17,r0 // was pud_present(*pud) == NULL?
dep r17=r18,r17,3,(PAGE_SHIFT-3) // r17=pmd_offset(pud,addr)
;;
#endif
(p7) ld8 r17=[r17] // fetch the L3 entry (may be 0)
shr.u r19=r22,PAGE_SHIFT // shift L4 index into position
(p7) ld8 r17=[r17] // get *pmd (may be 0)
shr.u r19=r22,PAGE_SHIFT // shift pte index into position
;;
(p7) cmp.eq.or.andcm p6,p7=r17,r0 // was L3 entry NULL?
dep r17=r19,r17,3,(PAGE_SHIFT-3) // compute address of L4 page table entry
(p7) cmp.eq.or.andcm p6,p7=r17,r0 // was pmd_present(*pmd) == NULL?
dep r17=r19,r17,3,(PAGE_SHIFT-3) // r17=pte_offset(pmd,addr);
(p6) br.cond.spnt page_fault
mov b0=r30
br.sptk.many b0 // return to continuation point
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7