Merge branch 'net-lan743x-pci11010-pci11414-devices-enhancements'

Raju Lakkaraju says:

====================
net: lan743x: PCI11010 / PCI11414 devices Enhancements

This patch series continues with the addition of supported features
for the Ethernet function of the PCI11010 / PCI11414 devices to
the LAN743x driver.
====================

Link: https://lore.kernel.org/r/20220616041226.26996-1-Raju.Lakkaraju@microchip.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/ethernet/microchip/lan743x_ethtool.c

@@ -155,7 +155,7 @@ static int lan743x_otp_write(struct lan743x_adapter *adapter, u32 offset,
 	return 0;
 }
 
-static int lan743x_hs_syslock_acquire(struct lan743x_adapter *adapter,
+int lan743x_hs_syslock_acquire(struct lan743x_adapter *adapter,
 			       u16 timeout)
 {
 	u16 timeout_cnt = 0;
@@ -192,7 +192,7 @@ static int lan743x_hs_syslock_acquire(struct lan743x_adapter *adapter,
 	return 0;
 }
 
-static void lan743x_hs_syslock_release(struct lan743x_adapter *adapter)
+void lan743x_hs_syslock_release(struct lan743x_adapter *adapter)
 {
 	u32 val;
 
@@ -1149,7 +1149,12 @@ static void lan743x_ethtool_get_wol(struct net_device *netdev,
 	wol->supported |= WAKE_BCAST | WAKE_UCAST | WAKE_MCAST |
 		WAKE_MAGIC | WAKE_PHY | WAKE_ARP;
 
+	if (adapter->is_pci11x1x)
+		wol->supported |= WAKE_MAGICSECURE;
+
 	wol->wolopts |= adapter->wolopts;
+	if (adapter->wolopts & WAKE_MAGICSECURE)
+		memcpy(wol->sopass, adapter->sopass, sizeof(wol->sopass));
 }
 
 static int lan743x_ethtool_set_wol(struct net_device *netdev,
@@ -1170,6 +1175,13 @@ static int lan743x_ethtool_set_wol(struct net_device *netdev,
 		adapter->wolopts |= WAKE_PHY;
 	if (wol->wolopts & WAKE_ARP)
 		adapter->wolopts |= WAKE_ARP;
+	if (wol->wolopts & WAKE_MAGICSECURE &&
+	    wol->wolopts & WAKE_MAGIC) {
+		memcpy(adapter->sopass, wol->sopass, sizeof(wol->sopass));
+		adapter->wolopts |= WAKE_MAGICSECURE;
+	} else {
+		memset(adapter->sopass, 0, sizeof(u8) * SOPASS_MAX);
+	}
 
 	device_set_wakeup_enable(&adapter->pdev->dev, (bool)wol->wolopts);
 
@@ -1178,6 +1190,49 @@ static int lan743x_ethtool_set_wol(struct net_device *netdev,
 }
 #endif /* CONFIG_PM */
 
+static void lan743x_common_regs(struct net_device *dev,
+				struct ethtool_regs *regs, void *p)
+
+{
+	struct lan743x_adapter *adapter = netdev_priv(dev);
+	u32 *rb = p;
+
+	memset(p, 0, (MAX_LAN743X_ETH_REGS * sizeof(u32)));
+
+	rb[ETH_PRIV_FLAGS] = adapter->flags;
+	rb[ETH_ID_REV]     = lan743x_csr_read(adapter, ID_REV);
+	rb[ETH_FPGA_REV]   = lan743x_csr_read(adapter, FPGA_REV);
+	rb[ETH_STRAP_READ] = lan743x_csr_read(adapter, STRAP_READ);
+	rb[ETH_INT_STS]    = lan743x_csr_read(adapter, INT_STS);
+	rb[ETH_HW_CFG]     = lan743x_csr_read(adapter, HW_CFG);
+	rb[ETH_PMT_CTL]    = lan743x_csr_read(adapter, PMT_CTL);
+	rb[ETH_E2P_CMD]    = lan743x_csr_read(adapter, E2P_CMD);
+	rb[ETH_E2P_DATA]   = lan743x_csr_read(adapter, E2P_DATA);
+	rb[ETH_MAC_CR]     = lan743x_csr_read(adapter, MAC_CR);
+	rb[ETH_MAC_RX]     = lan743x_csr_read(adapter, MAC_RX);
+	rb[ETH_MAC_TX]     = lan743x_csr_read(adapter, MAC_TX);
+	rb[ETH_FLOW]       = lan743x_csr_read(adapter, MAC_FLOW);
+	rb[ETH_MII_ACC]    = lan743x_csr_read(adapter, MAC_MII_ACC);
+	rb[ETH_MII_DATA]   = lan743x_csr_read(adapter, MAC_MII_DATA);
+	rb[ETH_EEE_TX_LPI_REQ_DLY]  = lan743x_csr_read(adapter,
+						       MAC_EEE_TX_LPI_REQ_DLY_CNT);
+	rb[ETH_WUCSR]      = lan743x_csr_read(adapter, MAC_WUCSR);
+	rb[ETH_WK_SRC]     = lan743x_csr_read(adapter, MAC_WK_SRC);
+}
+
+static int lan743x_get_regs_len(struct net_device *dev)
+{
+	return MAX_LAN743X_ETH_REGS * sizeof(u32);
+}
+
+static void lan743x_get_regs(struct net_device *dev,
+			     struct ethtool_regs *regs, void *p)
+{
+	regs->version = LAN743X_ETH_REG_VERSION;
+
+	lan743x_common_regs(dev, regs, p);
+}
+
 const struct ethtool_ops lan743x_ethtool_ops = {
 	.get_drvinfo = lan743x_ethtool_get_drvinfo,
 	.get_msglevel = lan743x_ethtool_get_msglevel,
@@ -1202,6 +1257,8 @@ const struct ethtool_ops lan743x_ethtool_ops = {
 	.set_eee = lan743x_ethtool_set_eee,
 	.get_link_ksettings = phy_ethtool_get_link_ksettings,
 	.set_link_ksettings = phy_ethtool_set_link_ksettings,
+	.get_regs_len = lan743x_get_regs_len,
+	.get_regs = lan743x_get_regs,
 #ifdef CONFIG_PM
 	.get_wol = lan743x_ethtool_get_wol,
 	.set_wol = lan743x_ethtool_set_wol,

drivers/net/ethernet/microchip/lan743x_ethtool.h

@@ -6,6 +6,32 @@
 
 #include "linux/ethtool.h"
 
+#define LAN743X_ETH_REG_VERSION         1
+
+enum {
+	ETH_PRIV_FLAGS,
+	ETH_ID_REV,
+	ETH_FPGA_REV,
+	ETH_STRAP_READ,
+	ETH_INT_STS,
+	ETH_HW_CFG,
+	ETH_PMT_CTL,
+	ETH_E2P_CMD,
+	ETH_E2P_DATA,
+	ETH_MAC_CR,
+	ETH_MAC_RX,
+	ETH_MAC_TX,
+	ETH_FLOW,
+	ETH_MII_ACC,
+	ETH_MII_DATA,
+	ETH_EEE_TX_LPI_REQ_DLY,
+	ETH_WUCSR,
+	ETH_WK_SRC,
+
+	/* Add new registers above */
+	MAX_LAN743X_ETH_REGS
+};
+
 extern const struct ethtool_ops lan743x_ethtool_ops;
 
 #endif /* _LAN743X_ETHTOOL_H */

drivers/net/ethernet/microchip/lan743x_main.c

@@ -22,20 +22,36 @@
 #define MMD_ACCESS_WRITE	1
 #define MMD_ACCESS_READ		2
 #define MMD_ACCESS_READ_INC	3
+#define PCS_POWER_STATE_DOWN	0x6
+#define PCS_POWER_STATE_UP	0x4
 
 static void pci11x1x_strap_get_status(struct lan743x_adapter *adapter)
 {
 	u32 chip_rev;
+	u32 cfg_load;
+	u32 hw_cfg;
 	u32 strap;
+	int ret;
+
+	/* Timeout = 100 (i.e. 1 sec (10 msce * 100)) */
+	ret = lan743x_hs_syslock_acquire(adapter, 100);
+	if (ret < 0) {
+		netif_err(adapter, drv, adapter->netdev,
+			  "Sys Lock acquire failed ret:%d\n", ret);
+		return;
+	}
 
+	cfg_load = lan743x_csr_read(adapter, ETH_SYS_CONFIG_LOAD_STARTED_REG);
+	lan743x_hs_syslock_release(adapter);
+	hw_cfg = lan743x_csr_read(adapter, HW_CFG);
+
+	if (cfg_load & GEN_SYS_LOAD_STARTED_REG_ETH_ ||
+	    hw_cfg & HW_CFG_RST_PROTECT_) {
 		strap = lan743x_csr_read(adapter, STRAP_READ);
-	if (strap & STRAP_READ_USE_SGMII_EN_) {
 		if (strap & STRAP_READ_SGMII_EN_)
 			adapter->is_sgmii_en = true;
 		else
 			adapter->is_sgmii_en = false;
-		netif_dbg(adapter, drv, adapter->netdev,
-			  "STRAP_READ: 0x%08X\n", strap);
 	} else {
 		chip_rev = lan743x_csr_read(adapter, FPGA_REV);
 		if (chip_rev) {
@@ -43,12 +59,12 @@ static void pci11x1x_strap_get_status(struct lan743x_adapter *adapter)
 				adapter->is_sgmii_en = true;
 			else
 				adapter->is_sgmii_en = false;
-			netif_dbg(adapter, drv, adapter->netdev,
-				  "FPGA_REV: 0x%08X\n", chip_rev);
 		} else {
 			adapter->is_sgmii_en = false;
 		}
 	}
+	netif_dbg(adapter, drv, adapter->netdev,
+		  "SGMII I/F %sable\n", adapter->is_sgmii_en ? "En" : "Dis");
 }
 
 static bool is_pci11x1x_chip(struct lan743x_adapter *adapter)
@@ -909,6 +925,318 @@ static int lan743x_mdiobus_c45_write(struct mii_bus *bus,
 	return ret;
 }
 
+static int lan743x_sgmii_wait_till_not_busy(struct lan743x_adapter *adapter)
+{
+	u32 data;
+	int ret;
+
+	ret = readx_poll_timeout(LAN743X_CSR_READ_OP, SGMII_ACC, data,
+				 !(data & SGMII_ACC_SGMII_BZY_), 100, 1000000);
+	if (ret < 0)
+		netif_err(adapter, drv, adapter->netdev,
+			  "%s: error %d sgmii wait timeout\n", __func__, ret);
+
+	return ret;
+}
+
+static int lan743x_sgmii_read(struct lan743x_adapter *adapter, u8 mmd, u16 addr)
+{
+	u32 mmd_access;
+	int ret;
+	u32 val;
+
+	if (mmd > 31) {
+		netif_err(adapter, probe, adapter->netdev,
+			  "%s mmd should <= 31\n", __func__);
+		return -EINVAL;
+	}
+
+	mutex_lock(&adapter->sgmii_rw_lock);
+	/* Load Register Address */
+	mmd_access = mmd << SGMII_ACC_SGMII_MMD_SHIFT_;
+	mmd_access |= (addr | SGMII_ACC_SGMII_BZY_);
+	lan743x_csr_write(adapter, SGMII_ACC, mmd_access);
+	ret = lan743x_sgmii_wait_till_not_busy(adapter);
+	if (ret < 0)
+		goto sgmii_unlock;
+
+	val = lan743x_csr_read(adapter, SGMII_DATA);
+	ret = (int)(val & SGMII_DATA_MASK_);
+
+sgmii_unlock:
+	mutex_unlock(&adapter->sgmii_rw_lock);
+
+	return ret;
+}
+
+static int lan743x_sgmii_write(struct lan743x_adapter *adapter,
+			       u8 mmd, u16 addr, u16 val)
+{
+	u32 mmd_access;
+	int ret;
+
+	if (mmd > 31) {
+		netif_err(adapter, probe, adapter->netdev,
+			  "%s mmd should <= 31\n", __func__);
+		return -EINVAL;
+	}
+	mutex_lock(&adapter->sgmii_rw_lock);
+	/* Load Register Data */
+	lan743x_csr_write(adapter, SGMII_DATA, (u32)(val & SGMII_DATA_MASK_));
+	/* Load Register Address */
+	mmd_access = mmd << SGMII_ACC_SGMII_MMD_SHIFT_;
+	mmd_access |= (addr | SGMII_ACC_SGMII_BZY_ | SGMII_ACC_SGMII_WR_);
+	lan743x_csr_write(adapter, SGMII_ACC, mmd_access);
+	ret = lan743x_sgmii_wait_till_not_busy(adapter);
+	mutex_unlock(&adapter->sgmii_rw_lock);
+
+	return ret;
+}
+
+static int lan743x_sgmii_mpll_set(struct lan743x_adapter *adapter,
+				  u16 baud)
+{
+	int mpllctrl0;
+	int mpllctrl1;
+	int miscctrl1;
+	int ret;
+
+	mpllctrl0 = lan743x_sgmii_read(adapter, MDIO_MMD_VEND2,
+				       VR_MII_GEN2_4_MPLL_CTRL0);
+	if (mpllctrl0 < 0)
+		return mpllctrl0;
+
+	mpllctrl0 &= ~VR_MII_MPLL_CTRL0_USE_REFCLK_PAD_;
+	if (baud == VR_MII_BAUD_RATE_1P25GBPS) {
+		mpllctrl1 = VR_MII_MPLL_MULTIPLIER_100;
+		/* mpll_baud_clk/4 */
+		miscctrl1 = 0xA;
+	} else {
+		mpllctrl1 = VR_MII_MPLL_MULTIPLIER_125;
+		/* mpll_baud_clk/2 */
+		miscctrl1 = 0x5;
+	}
+
+	ret = lan743x_sgmii_write(adapter, MDIO_MMD_VEND2,
+				  VR_MII_GEN2_4_MPLL_CTRL0, mpllctrl0);
+	if (ret < 0)
+		return ret;
+
+	ret = lan743x_sgmii_write(adapter, MDIO_MMD_VEND2,
+				  VR_MII_GEN2_4_MPLL_CTRL1, mpllctrl1);
+	if (ret < 0)
+		return ret;
+
+	return lan743x_sgmii_write(adapter, MDIO_MMD_VEND2,
+				  VR_MII_GEN2_4_MISC_CTRL1, miscctrl1);
+}
+
+static int lan743x_sgmii_2_5G_mode_set(struct lan743x_adapter *adapter,
+				       bool enable)
+{
+	if (enable)
+		return lan743x_sgmii_mpll_set(adapter,
+					      VR_MII_BAUD_RATE_3P125GBPS);
+	else
+		return lan743x_sgmii_mpll_set(adapter,
+					      VR_MII_BAUD_RATE_1P25GBPS);
+}
+
+static int lan743x_is_sgmii_2_5G_mode(struct lan743x_adapter *adapter,
+				      bool *status)
+{
+	int ret;
+
+	ret = lan743x_sgmii_read(adapter, MDIO_MMD_VEND2,
+				 VR_MII_GEN2_4_MPLL_CTRL1);
+	if (ret < 0)
+		return ret;
+
+	if (ret == VR_MII_MPLL_MULTIPLIER_125 ||
+	    ret == VR_MII_MPLL_MULTIPLIER_50)
+		*status = true;
+	else
+		*status = false;
+
+	return 0;
+}
+
+static int lan743x_sgmii_aneg_update(struct lan743x_adapter *adapter)
+{
+	enum lan743x_sgmii_lsd lsd = adapter->sgmii_lsd;
+	int mii_ctrl;
+	int dgt_ctrl;
+	int an_ctrl;
+	int ret;
+
+	if (lsd == LINK_2500_MASTER || lsd == LINK_2500_SLAVE)
+		/* Switch to 2.5 Gbps */
+		ret = lan743x_sgmii_2_5G_mode_set(adapter, true);
+	else
+		/* Switch to 10/100/1000 Mbps clock */
+		ret = lan743x_sgmii_2_5G_mode_set(adapter, false);
+	if (ret < 0)
+		return ret;
+
+	/* Enable SGMII Auto NEG */
+	mii_ctrl = lan743x_sgmii_read(adapter, MDIO_MMD_VEND2, MII_BMCR);
+	if (mii_ctrl < 0)
+		return mii_ctrl;
+
+	an_ctrl = lan743x_sgmii_read(adapter, MDIO_MMD_VEND2, VR_MII_AN_CTRL);
+	if (an_ctrl < 0)
+		return an_ctrl;
+
+	dgt_ctrl = lan743x_sgmii_read(adapter, MDIO_MMD_VEND2,
+				      VR_MII_DIG_CTRL1);
+	if (dgt_ctrl < 0)
+		return dgt_ctrl;
+
+	if (lsd == LINK_2500_MASTER || lsd == LINK_2500_SLAVE) {
+		mii_ctrl &= ~(BMCR_ANENABLE | BMCR_ANRESTART | BMCR_SPEED100);
+		mii_ctrl |= BMCR_SPEED1000;
+		dgt_ctrl |= VR_MII_DIG_CTRL1_CL37_TMR_OVR_RIDE_;
+		dgt_ctrl &= ~VR_MII_DIG_CTRL1_MAC_AUTO_SW_;
+		/* In order for Auto-Negotiation to operate properly at
+		 * 2.5 Gbps the 1.6ms link timer values must be adjusted
+		 * The VR_MII_LINK_TIMER_CTRL Register must be set to
+		 * 16'h7A1 and The CL37_TMR_OVR_RIDE bit of the
+		 * VR_MII_DIG_CTRL1 Register set to 1
+		 */
+		ret = lan743x_sgmii_write(adapter, MDIO_MMD_VEND2,
+					  VR_MII_LINK_TIMER_CTRL, 0x7A1);
+		if (ret < 0)
+			return ret;
+	} else {
+		mii_ctrl |= (BMCR_ANENABLE | BMCR_ANRESTART);
+		an_ctrl &= ~VR_MII_AN_CTRL_SGMII_LINK_STS_;
+		dgt_ctrl &= ~VR_MII_DIG_CTRL1_CL37_TMR_OVR_RIDE_;
+		dgt_ctrl |= VR_MII_DIG_CTRL1_MAC_AUTO_SW_;
+	}
+
+	ret = lan743x_sgmii_write(adapter, MDIO_MMD_VEND2, MII_BMCR,
+				  mii_ctrl);
+	if (ret < 0)
+		return ret;
+
+	ret = lan743x_sgmii_write(adapter, MDIO_MMD_VEND2,
+				  VR_MII_DIG_CTRL1, dgt_ctrl);
+	if (ret < 0)
+		return ret;
+
+	return lan743x_sgmii_write(adapter, MDIO_MMD_VEND2,
+				  VR_MII_AN_CTRL, an_ctrl);
+}
+
+static int lan743x_pcs_seq_state(struct lan743x_adapter *adapter, u8 state)
+{
+	u8 wait_cnt = 0;
+	u32 dig_sts;
+
+	do {
+		dig_sts = lan743x_sgmii_read(adapter, MDIO_MMD_VEND2,
+					     VR_MII_DIG_STS);
+		if (((dig_sts & VR_MII_DIG_STS_PSEQ_STATE_MASK_) >>
+		      VR_MII_DIG_STS_PSEQ_STATE_POS_) == state)
+			break;
+		usleep_range(1000, 2000);
+	} while (wait_cnt++ < 10);
+
+	if (wait_cnt >= 10)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static int lan743x_sgmii_config(struct lan743x_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	struct phy_device *phydev = netdev->phydev;
+	enum lan743x_sgmii_lsd lsd = POWER_DOWN;
+	int mii_ctl;
+	bool status;
+	int ret;
+
+	switch (phydev->speed) {
+	case SPEED_2500:
+		if (phydev->master_slave_state == MASTER_SLAVE_STATE_MASTER)
+			lsd = LINK_2500_MASTER;
+		else
+			lsd = LINK_2500_SLAVE;
+		break;
+	case SPEED_1000:
+		if (phydev->master_slave_state == MASTER_SLAVE_STATE_MASTER)
+			lsd = LINK_1000_MASTER;
+		else
+			lsd = LINK_1000_SLAVE;
+		break;
+	case SPEED_100:
+		if (phydev->duplex)
+			lsd = LINK_100FD;
+		else
+			lsd = LINK_100HD;
+		break;
+	case SPEED_10:
+		if (phydev->duplex)
+			lsd = LINK_10FD;
+		else
+			lsd = LINK_10HD;
+		break;
+	default:
+		netif_err(adapter, drv, adapter->netdev,
+			  "Invalid speed %d\n", phydev->speed);
+		return -EINVAL;
+	}
+
+	adapter->sgmii_lsd = lsd;
+	ret = lan743x_sgmii_aneg_update(adapter);
+	if (ret < 0) {
+		netif_err(adapter, drv, adapter->netdev,
+			  "error %d SGMII cfg failed\n", ret);
+		return ret;
+	}
+
+	ret = lan743x_is_sgmii_2_5G_mode(adapter, &status);
+	if (ret < 0) {
+		netif_err(adapter, drv, adapter->netdev,
+			  "erro %d SGMII get mode failed\n", ret);
+		return ret;
+	}
+
+	if (status)
+		netif_dbg(adapter, drv, adapter->netdev,
+			  "SGMII 2.5G mode enable\n");
+	else
+		netif_dbg(adapter, drv, adapter->netdev,
+			  "SGMII 1G mode enable\n");
+
+	/* SGMII/1000/2500BASE-X PCS power down */
+	mii_ctl = lan743x_sgmii_read(adapter, MDIO_MMD_VEND2, MII_BMCR);
+	if (ret < 0)
+		return ret;
+
+	mii_ctl |= BMCR_PDOWN;
+	ret = lan743x_sgmii_write(adapter, MDIO_MMD_VEND2, MII_BMCR, mii_ctl);
+	if (ret < 0)
+		return ret;
+
+	ret = lan743x_pcs_seq_state(adapter, PCS_POWER_STATE_DOWN);
+	if (ret < 0)
+		return ret;
+
+	/* SGMII/1000/2500BASE-X PCS power up */
+	mii_ctl &= ~BMCR_PDOWN;
+	ret = lan743x_sgmii_write(adapter, MDIO_MMD_VEND2, MII_BMCR, mii_ctl);
+	if (ret < 0)
+		return ret;
+
+	ret = lan743x_pcs_seq_state(adapter, PCS_POWER_STATE_UP);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
 static void lan743x_mac_set_address(struct lan743x_adapter *adapter,
 				    u8 *addr)
 {
@@ -1124,6 +1452,10 @@ static void lan743x_phy_link_status_change(struct net_device *netdev)
 			data |= MAC_CR_CFG_H_;
 			data &= ~MAC_CR_CFG_L_;
 		break;
+		case SPEED_2500:
+			data |= MAC_CR_CFG_H_;
+			data |= MAC_CR_CFG_L_;
+		break;
 		}
 		lan743x_csr_write(adapter, MAC_CR, data);
 
@@ -1135,6 +1467,10 @@ static void lan743x_phy_link_status_change(struct net_device *netdev)
 		lan743x_phy_update_flowcontrol(adapter, local_advertisement,
 					       remote_advertisement);
 		lan743x_ptp_update_latency(adapter, phydev->speed);
+		if (phydev->interface == PHY_INTERFACE_MODE_SGMII ||
+		    phydev->interface == PHY_INTERFACE_MODE_1000BASEX ||
+		    phydev->interface == PHY_INTERFACE_MODE_2500BASEX)
+			lan743x_sgmii_config(adapter);
 	}
 }
 
@@ -2875,6 +3211,7 @@ static int lan743x_hardware_init(struct lan743x_adapter *adapter,
 		adapter->max_vector_count = PCI11X1X_MAX_VECTOR_COUNT;
 		pci11x1x_strap_get_status(adapter);
 		spin_lock_init(&adapter->eth_syslock_spinlock);
+		mutex_init(&adapter->sgmii_rw_lock);
 	} else {
 		adapter->max_tx_channels = LAN743X_MAX_TX_CHANNELS;
 		adapter->used_tx_channels = LAN743X_USED_TX_CHANNELS;
@@ -3124,6 +3461,7 @@ static void lan743x_pm_set_wol(struct lan743x_adapter *adapter)
 	const u8 ipv6_multicast[3] = { 0x33, 0x33 };
 	const u8 arp_type[2] = { 0x08, 0x06 };
 	int mask_index;
+	u32 sopass;
 	u32 pmtctl;
 	u32 wucsr;
 	u32 macrx;
@@ -3218,6 +3556,14 @@ static void lan743x_pm_set_wol(struct lan743x_adapter *adapter)
 		pmtctl |= PMT_CTL_RX_FCT_RFE_D3_CLK_OVR_;
 	}
 
+	if (adapter->wolopts & WAKE_MAGICSECURE) {
+		sopass = *(u32 *)adapter->sopass;
+		lan743x_csr_write(adapter, MAC_MP_SO_LO, sopass);
+		sopass = *(u16 *)&adapter->sopass[4];
+		lan743x_csr_write(adapter, MAC_MP_SO_HI, sopass);
+		wucsr |= MAC_MP_SO_EN_;
+	}
+
 	lan743x_csr_write(adapter, MAC_WUCSR, wucsr);
 	lan743x_csr_write(adapter, PMT_CTL, pmtctl);
 	lan743x_csr_write(adapter, MAC_RX, macrx);
@@ -3228,6 +3574,7 @@ static int lan743x_pm_suspend(struct device *dev)
 	struct pci_dev *pdev = to_pci_dev(dev);
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct lan743x_adapter *adapter = netdev_priv(netdev);
+	u32 data;
 
 	lan743x_pcidev_shutdown(pdev);
 
@@ -3239,6 +3586,18 @@ static int lan743x_pm_suspend(struct device *dev)
 	if (adapter->wolopts)
 		lan743x_pm_set_wol(adapter);
 
+	if (adapter->is_pci11x1x) {
+		/* Save HW_CFG to config again in PM resume */
+		data = lan743x_csr_read(adapter, HW_CFG);
+		adapter->hw_cfg = data;
+		data |= (HW_CFG_RST_PROTECT_PCIE_ |
+			 HW_CFG_D3_RESET_DIS_ |
+			 HW_CFG_D3_VAUX_OVR_ |
+			 HW_CFG_HOT_RESET_DIS_ |
+			 HW_CFG_RST_PROTECT_);
+		lan743x_csr_write(adapter, HW_CFG, data);
+	}
+
 	/* Host sets PME_En, put D3hot */
 	return pci_prepare_to_sleep(pdev);
 }
@@ -3254,6 +3613,10 @@ static int lan743x_pm_resume(struct device *dev)
 	pci_restore_state(pdev);
 	pci_save_state(pdev);
 
+	/* Restore HW_CFG that was saved during pm suspend */
+	if (adapter->is_pci11x1x)
+		lan743x_csr_write(adapter, HW_CFG, adapter->hw_cfg);
+
 	ret = lan743x_hardware_init(adapter, pdev);
 	if (ret) {
 		netif_err(adapter, probe, adapter->netdev,
@@ -3270,6 +3633,9 @@ static int lan743x_pm_resume(struct device *dev)
 		lan743x_netdev_open(netdev);
 
 	netif_device_attach(netdev);
+	ret = lan743x_csr_read(adapter, MAC_WK_SRC);
+	netif_info(adapter, drv, adapter->netdev,
+		   "Wakeup source : 0x%08X\n", ret);
 
 	return 0;
 }

drivers/net/ethernet/microchip/lan743x_main.h

@@ -43,6 +43,11 @@
 #define STRAP_READ_ADV_PM_DISABLE_	BIT(0)
 
 #define HW_CFG					(0x010)
+#define HW_CFG_RST_PROTECT_PCIE_		BIT(19)
+#define HW_CFG_HOT_RESET_DIS_			BIT(15)
+#define HW_CFG_D3_VAUX_OVR_			BIT(14)
+#define HW_CFG_D3_RESET_DIS_			BIT(13)
+#define HW_CFG_RST_PROTECT_			BIT(12)
 #define HW_CFG_RELOAD_TYPE_ALL_			(0x00000FC0)
 #define HW_CFG_EE_OTP_RELOAD_			BIT(4)
 #define HW_CFG_LRST_				BIT(1)
@@ -92,6 +97,11 @@
 #define CONFIG_REG_ADDR_BASE		(0x0000)
 #define ETH_EEPROM_REG_ADDR_BASE	(0x0E00)
 #define ETH_OTP_REG_ADDR_BASE		(0x1000)
+#define GEN_SYS_CONFIG_LOAD_STARTED_REG	(0x0078)
+#define ETH_SYS_CONFIG_LOAD_STARTED_REG (ETH_SYS_REG_ADDR_BASE + \
+					 CONFIG_REG_ADDR_BASE + \
+					 GEN_SYS_CONFIG_LOAD_STARTED_REG)
+#define GEN_SYS_LOAD_STARTED_REG_ETH_	BIT(4)
 #define SYS_LOCK_REG			(0x00A0)
 #define SYS_LOCK_REG_MAIN_LOCK_		BIT(7)
 #define SYS_LOCK_REG_GEN_PERI_LOCK_	BIT(5)
@@ -214,6 +224,7 @@
 #define MAC_EEE_TX_LPI_REQ_DLY_CNT		(0x130)
 
 #define MAC_WUCSR				(0x140)
+#define MAC_MP_SO_EN_				BIT(21)
 #define MAC_WUCSR_RFE_WAKE_EN_			BIT(14)
 #define MAC_WUCSR_PFDA_EN_			BIT(3)
 #define MAC_WUCSR_WAKE_EN_			BIT(2)
@@ -221,6 +232,8 @@
 #define MAC_WUCSR_BCST_EN_			BIT(0)
 
 #define MAC_WK_SRC				(0x144)
+#define MAC_MP_SO_HI				(0x148)
+#define MAC_MP_SO_LO				(0x14C)
 
 #define MAC_WUF_CFG0			(0x150)
 #define MAC_NUM_OF_WUF_CFG		(32)
@@ -280,11 +293,82 @@
 
 #define MAC_WUCSR2			(0x600)
 
+#define SGMII_ACC			(0x720)
+#define SGMII_ACC_SGMII_BZY_		BIT(31)
+#define SGMII_ACC_SGMII_WR_		BIT(30)
+#define SGMII_ACC_SGMII_MMD_SHIFT_	(16)
+#define SGMII_ACC_SGMII_MMD_MASK_	GENMASK(20, 16)
+#define SGMII_ACC_SGMII_MMD_VSR_	BIT(15)
+#define SGMII_ACC_SGMII_ADDR_SHIFT_	(0)
+#define SGMII_ACC_SGMII_ADDR_MASK_	GENMASK(15, 0)
+#define SGMII_DATA			(0x724)
+#define SGMII_DATA_SHIFT_		(0)
+#define SGMII_DATA_MASK_		GENMASK(15, 0)
 #define SGMII_CTL			(0x728)
 #define SGMII_CTL_SGMII_ENABLE_		BIT(31)
 #define SGMII_CTL_LINK_STATUS_SOURCE_	BIT(8)
 #define SGMII_CTL_SGMII_POWER_DN_	BIT(1)
 
+/* Vendor Specific SGMII MMD details */
+#define SR_VSMMD_PCS_ID1		0x0004
+#define SR_VSMMD_PCS_ID2		0x0005
+#define SR_VSMMD_STS			0x0008
+#define SR_VSMMD_CTRL			0x0009
+
+#define VR_MII_DIG_CTRL1			0x8000
+#define VR_MII_DIG_CTRL1_VR_RST_		BIT(15)
+#define VR_MII_DIG_CTRL1_R2TLBE_		BIT(14)
+#define VR_MII_DIG_CTRL1_EN_VSMMD1_		BIT(13)
+#define VR_MII_DIG_CTRL1_CS_EN_			BIT(10)
+#define VR_MII_DIG_CTRL1_MAC_AUTO_SW_		BIT(9)
+#define VR_MII_DIG_CTRL1_INIT_			BIT(8)
+#define VR_MII_DIG_CTRL1_DTXLANED_0_		BIT(4)
+#define VR_MII_DIG_CTRL1_CL37_TMR_OVR_RIDE_	BIT(3)
+#define VR_MII_DIG_CTRL1_EN_2_5G_MODE_		BIT(2)
+#define VR_MII_DIG_CTRL1_BYP_PWRUP_		BIT(1)
+#define VR_MII_DIG_CTRL1_PHY_MODE_CTRL_		BIT(0)
+#define VR_MII_AN_CTRL				0x8001
+#define VR_MII_AN_CTRL_MII_CTRL_		BIT(8)
+#define VR_MII_AN_CTRL_SGMII_LINK_STS_		BIT(4)
+#define VR_MII_AN_CTRL_TX_CONFIG_		BIT(3)
+#define VR_MII_AN_CTRL_1000BASE_X_		(0)
+#define VR_MII_AN_CTRL_SGMII_MODE_		(2)
+#define VR_MII_AN_CTRL_QSGMII_MODE_		(3)
+#define VR_MII_AN_CTRL_PCS_MODE_SHIFT_		(1)
+#define VR_MII_AN_CTRL_PCS_MODE_MASK_		GENMASK(2, 1)
+#define VR_MII_AN_CTRL_MII_AN_INTR_EN_		BIT(0)
+#define VR_MII_AN_INTR_STS			0x8002
+#define VR_MII_AN_INTR_STS_LINK_UP_		BIT(4)
+#define VR_MII_AN_INTR_STS_SPEED_MASK_		GENMASK(3, 2)
+#define VR_MII_AN_INTR_STS_1000_MBPS_		BIT(3)
+#define VR_MII_AN_INTR_STS_100_MBPS_		BIT(2)
+#define VR_MII_AN_INTR_STS_10_MBPS_		(0)
+#define VR_MII_AN_INTR_STS_FDX_			BIT(1)
+#define VR_MII_AN_INTR_STS_CL37_ANCMPLT_INTR_	BIT(0)
+
+#define VR_MII_LINK_TIMER_CTRL			0x800A
+#define VR_MII_DIG_STS                          0x8010
+#define VR_MII_DIG_STS_PSEQ_STATE_MASK_         GENMASK(4, 2)
+#define VR_MII_DIG_STS_PSEQ_STATE_POS_          (2)
+#define VR_MII_GEN2_4_MPLL_CTRL0		0x8078
+#define VR_MII_MPLL_CTRL0_REF_CLK_DIV2_		BIT(12)
+#define VR_MII_MPLL_CTRL0_USE_REFCLK_PAD_	BIT(4)
+#define VR_MII_GEN2_4_MPLL_CTRL1		0x8079
+#define VR_MII_MPLL_CTRL1_MPLL_MULTIPLIER_	GENMASK(6, 0)
+#define VR_MII_BAUD_RATE_3P125GBPS		(3125)
+#define VR_MII_BAUD_RATE_1P25GBPS		(1250)
+#define VR_MII_MPLL_MULTIPLIER_125		(125)
+#define VR_MII_MPLL_MULTIPLIER_100		(100)
+#define VR_MII_MPLL_MULTIPLIER_50		(50)
+#define VR_MII_MPLL_MULTIPLIER_40		(40)
+#define VR_MII_GEN2_4_MISC_CTRL1		0x809A
+#define VR_MII_CTRL1_RX_RATE_0_MASK_		GENMASK(3, 2)
+#define VR_MII_CTRL1_RX_RATE_0_SHIFT_		(2)
+#define VR_MII_CTRL1_TX_RATE_0_MASK_		GENMASK(1, 0)
+#define VR_MII_MPLL_BAUD_CLK			(0)
+#define VR_MII_MPLL_BAUD_CLK_DIV_2		(1)
+#define VR_MII_MPLL_BAUD_CLK_DIV_4		(2)
+
 #define INT_STS				(0x780)
 #define INT_BIT_DMA_RX_(channel)	BIT(24 + (channel))
 #define INT_BIT_ALL_RX_			(0x0F000000)
@@ -906,12 +990,28 @@ struct lan743x_rx {
 	struct sk_buff *skb_head, *skb_tail;
 };
 
+/* SGMII Link Speed Duplex status */
+enum lan743x_sgmii_lsd {
+	POWER_DOWN = 0,
+	LINK_DOWN,
+	ANEG_BUSY,
+	LINK_10HD,
+	LINK_10FD,
+	LINK_100HD,
+	LINK_100FD,
+	LINK_1000_MASTER,
+	LINK_1000_SLAVE,
+	LINK_2500_MASTER,
+	LINK_2500_SLAVE
+};
+
 struct lan743x_adapter {
 	struct net_device       *netdev;
 	struct mii_bus		*mdiobus;
 	int                     msg_enable;
 #ifdef CONFIG_PM
 	u32			wolopts;
+	u8			sopass[SOPASS_MAX];
 #endif
 	struct pci_dev		*pdev;
 	struct lan743x_csr      csr;
@@ -931,12 +1031,16 @@ struct lan743x_adapter {
 	spinlock_t		eth_syslock_spinlock;
 	bool			eth_syslock_en;
 	u32			eth_syslock_acquire_cnt;
+	struct mutex		sgmii_rw_lock;
+	/* SGMII Link Speed & Duplex status */
+	enum			lan743x_sgmii_lsd sgmii_lsd;
 	u8			max_tx_channels;
 	u8			used_tx_channels;
 	u8			max_vector_count;
 
 #define LAN743X_ADAPTER_FLAG_OTP		BIT(0)
 	u32			flags;
+	u32			hw_cfg;
 };
 
 #define LAN743X_COMPONENT_FLAG_RX(channel)  BIT(20 + (channel))
@@ -1049,5 +1153,7 @@ struct lan743x_rx_buffer_info {
 
 u32 lan743x_csr_read(struct lan743x_adapter *adapter, int offset);
 void lan743x_csr_write(struct lan743x_adapter *adapter, int offset, u32 data);
+int lan743x_hs_syslock_acquire(struct lan743x_adapter *adapter, u16 timeout);
+void lan743x_hs_syslock_release(struct lan743x_adapter *adapter);
 
 #endif /* _LAN743X_H */

drivers/net/phy/mxl-gpy.c

@@ -295,6 +295,9 @@ static void gpy_update_interface(struct phy_device *phydev)
 				   ret);
 		break;
 	}
+
+	if (phydev->speed == SPEED_2500 || phydev->speed == SPEED_1000)
+		genphy_read_master_slave(phydev);
 }
 
 static int gpy_read_status(struct phy_device *phydev)