mmc: sdhci: move regulator handling into sdhci_set_power()

Move the regulator handling into sdhci_set_power() rather than being in
sdhci_do_set_ios().  This wraps all power control up into this function.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Markus Pargmann <mpa@pengutronix.de>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>

drivers/mmc/host/sdhci.c

@@ -1216,7 +1216,7 @@ void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
 }
 EXPORT_SYMBOL_GPL(sdhci_set_clock);
 
-static int sdhci_set_power(struct sdhci_host *host, unsigned short power)
+static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
 {
 	u8 pwr = 0;
 
@@ -1239,7 +1239,7 @@ static int sdhci_set_power(struct sdhci_host *host, unsigned short power)
 	}
 
 	if (host->pwr == pwr)
-		return -1;
+		return;
 
 	host->pwr = pwr;
 
@@ -1247,9 +1247,8 @@ static int sdhci_set_power(struct sdhci_host *host, unsigned short power)
 		sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
 		if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON)
 			sdhci_runtime_pm_bus_off(host);
-		return 0;
-	}
-
+		power = 0;
+	} else {
 		/*
 		 * Spec says that we should clear the power reg before setting
 		 * a new value. Some controllers don't seem to like this though.
@@ -1258,8 +1257,9 @@ static int sdhci_set_power(struct sdhci_host *host, unsigned short power)
 			sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
 
 		/*
-	 * At least the Marvell CaFe chip gets confused if we set the voltage
-	 * and set turn on power at the same time, so set the voltage first.
+		 * At least the Marvell CaFe chip gets confused if we set the
+		 * voltage and set turn on power at the same time, so set the
+		 * voltage first.
 		 */
 		if (host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER)
 			sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
@@ -1272,13 +1272,18 @@ static int sdhci_set_power(struct sdhci_host *host, unsigned short power)
 			sdhci_runtime_pm_bus_on(host);
 
 		/*
-	 * Some controllers need an extra 10ms delay of 10ms before they
-	 * can apply clock after applying power
+		 * Some controllers need an extra 10ms delay of 10ms before
+		 * they can apply clock after applying power
 		 */
 		if (host->quirks & SDHCI_QUIRK_DELAY_AFTER_POWER)
 			mdelay(10);
+	}
 
-	return power;
+	if (host->vmmc) {
+		spin_unlock_irq(&host->lock);
+		mmc_regulator_set_ocr(host->mmc, host->vmmc, power);
+		spin_lock_irq(&host->lock);
+	}
 }
 
 /*****************************************************************************\
@@ -1429,7 +1434,6 @@ EXPORT_SYMBOL_GPL(sdhci_set_uhs_signaling);
 static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
 {
 	unsigned long flags;
-	int vdd_bit = -1;
 	u8 ctrl;
 
 	spin_lock_irqsave(&host->lock, flags);
@@ -1461,15 +1465,9 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
 	}
 
 	if (ios->power_mode == MMC_POWER_OFF)
-		vdd_bit = sdhci_set_power(host, -1);
+		sdhci_set_power(host, -1);
 	else
-		vdd_bit = sdhci_set_power(host, ios->vdd);
-
-	if (host->vmmc && vdd_bit != -1) {
-		spin_unlock_irqrestore(&host->lock, flags);
-		mmc_regulator_set_ocr(host->mmc, host->vmmc, vdd_bit);
-		spin_lock_irqsave(&host->lock, flags);
-	}
+		sdhci_set_power(host, ios->vdd);
 
 	if (host->ops->platform_send_init_74_clocks)
 		host->ops->platform_send_init_74_clocks(host, ios->power_mode);