HID: nintendo: ratelimit subcommands and rumble

It has been found that sending subcommands and rumble data packets at
too great a rate can result in controller disconnects. This patch limits
the rate of subcommands/rumble to once every 25 milliseconds.

Similar to sending subcommands, it is more reliable to send the rumble
data packets immediately after we've received an input report from the
controller. This results in far fewer bluetooth disconnects for the
controller.
Signed-off-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

drivers/hid/hid-nintendo.c

@@ -2,7 +2,7 @@
 /*
  * HID driver for Nintendo Switch Joy-Cons and Pro Controllers
  *
- * Copyright (c) 2019-2020 Daniel J. Ogorchock <djogorchock@gmail.com>
+ * Copyright (c) 2019-2021 Daniel J. Ogorchock <djogorchock@gmail.com>
  *
  * The following resources/projects were referenced for this driver:
  *   https://github.com/dekuNukem/Nintendo_Switch_Reverse_Engineering
@@ -431,6 +431,7 @@ struct joycon_ctlr {
 	u8 usb_ack_match;
 	u8 subcmd_ack_match;
 	bool received_input_report;
+	unsigned int last_subcmd_sent_msecs;
 
 	/* factory calibration data */
 	struct joycon_stick_cal left_stick_cal_x;
@@ -510,17 +511,10 @@ static int __joycon_hid_send(struct hid_device *hdev, u8 *data, size_t len)
 	return ret;
 }
 
-static int joycon_hid_send_sync(struct joycon_ctlr *ctlr, u8 *data, size_t len,
-				u32 timeout)
+static void joycon_wait_for_input_report(struct joycon_ctlr *ctlr)
 {
 	int ret;
-	int tries = 2;
 
-	/*
-	 * The controller occasionally seems to drop subcommands. In testing,
-	 * doing one retry after a timeout appears to always work.
-	 */
-	while (tries--) {
 	/*
 	 * If we are in the proper reporting mode, wait for an input
 	 * report prior to sending the subcommand. This improves
@@ -540,6 +534,39 @@ static int joycon_hid_send_sync(struct joycon_ctlr *ctlr, u8 *data, size_t len,
 			hid_warn(ctlr->hdev,
 				 "timeout waiting for input report\n");
 	}
+}
+
+/*
+ * Sending subcommands and/or rumble data at too high a rate can cause bluetooth
+ * controller disconnections.
+ */
+static void joycon_enforce_subcmd_rate(struct joycon_ctlr *ctlr)
+{
+	static const unsigned int max_subcmd_rate_ms = 25;
+	unsigned int current_ms = jiffies_to_msecs(jiffies);
+	unsigned int delta_ms = current_ms - ctlr->last_subcmd_sent_msecs;
+
+	while (delta_ms < max_subcmd_rate_ms &&
+	       ctlr->ctlr_state == JOYCON_CTLR_STATE_READ) {
+		joycon_wait_for_input_report(ctlr);
+		current_ms = jiffies_to_msecs(jiffies);
+		delta_ms = current_ms - ctlr->last_subcmd_sent_msecs;
+	}
+	ctlr->last_subcmd_sent_msecs = current_ms;
+}
+
+static int joycon_hid_send_sync(struct joycon_ctlr *ctlr, u8 *data, size_t len,
+				u32 timeout)
+{
+	int ret;
+	int tries = 2;
+
+	/*
+	 * The controller occasionally seems to drop subcommands. In testing,
+	 * doing one retry after a timeout appears to always work.
+	 */
+	while (tries--) {
+		joycon_enforce_subcmd_rate(ctlr);
 
 		ret = __joycon_hid_send(ctlr->hdev, data, len);
 		if (ret < 0) {
@@ -1359,6 +1386,8 @@ static int joycon_send_rumble_data(struct joycon_ctlr *ctlr)
 	if (++ctlr->subcmd_num > 0xF)
 		ctlr->subcmd_num = 0;
 
+	joycon_enforce_subcmd_rate(ctlr);
+
 	ret = __joycon_hid_send(ctlr->hdev, (u8 *)&rumble_output,
 				sizeof(rumble_output));
 	return ret;