ARM: shmobile: Use shared SCU CPU Hotplug code on r8a7779

Update the r8a7779 specific CPU Hotplug code to make use of
the recently introduced shared SCU functions. The r8a7779
power domain hardware requires special power down handling
at ->kill() time.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

arch/arm/mach-shmobile/smp-r8a7779.c

@@ -122,47 +122,14 @@ static void __init r8a7779_smp_prepare_cpus(unsigned int max_cpus)
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
-static int r8a7779_scu_psr_core_disabled(int cpu)
-{
-	unsigned long mask = 3 << (cpu * 8);
-
-	if ((__raw_readl(shmobile_scu_base + 8) & mask) == mask)
-		return 1;
-
-	return 0;
-}
-
 static int r8a7779_cpu_kill(unsigned int cpu)
 {
-	int k;
-
-	/* this function is running on another CPU than the offline target,
-	 * here we need wait for shutdown code in platform_cpu_die() to
-	 * finish before asking SoC-specific code to power off the CPU core.
-	 */
-	for (k = 0; k < 1000; k++) {
-		if (r8a7779_scu_psr_core_disabled(cpu))
+	if (shmobile_smp_scu_cpu_kill(cpu))
 		return r8a7779_platform_cpu_kill(cpu);
 
-		mdelay(1);
-	}
-
 	return 0;
 }
 
-static void r8a7779_cpu_die(unsigned int cpu)
-{
-	dsb();
-	flush_cache_all();
-
-	/* disable cache coherency */
-	scu_power_mode(shmobile_scu_base, SCU_PM_POWEROFF);
-
-	/* Endless loop until power off from r8a7779_cpu_kill() */
-	while (1)
-		cpu_do_idle();
-}
-
 static int r8a7779_cpu_disable(unsigned int cpu)
 {
 	/* only CPU1->3 have power domains, do not allow hotplug of CPU0 */
@@ -174,8 +141,8 @@ struct smp_operations r8a7779_smp_ops  __initdata = {
 	.smp_prepare_cpus	= r8a7779_smp_prepare_cpus,
 	.smp_boot_secondary	= r8a7779_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
-	.cpu_kill		= r8a7779_cpu_kill,
-	.cpu_die		= r8a7779_cpu_die,
 	.cpu_disable		= r8a7779_cpu_disable,
+	.cpu_die		= shmobile_smp_scu_cpu_die,
+	.cpu_kill		= r8a7779_cpu_kill,
 #endif
 };