staging: iio: tsl2x7x: add common function for clearing interrupts

There were three places where the same chunk of code was used to clear
interrupts. This patch creates a common function
tsl2x7x_clear_interrupts() to reduce duplicate code.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

drivers/staging/iio/light/tsl2x7x.c

@@ -279,6 +279,20 @@ static const u8 device_channel_config[] = {
 	ALSPRX2
 };
 
+static int tsl2x7x_clear_interrupts(struct tsl2X7X_chip *chip, int reg)
+{
+	int ret;
+
+	ret = i2c_smbus_write_byte(chip->client,
+				   TSL2X7X_CMD_REG | TSL2X7X_CMD_SPL_FN | reg);
+	if (ret < 0)
+		dev_err(&chip->client->dev,
+			"%s: failed to clear interrupt status %x: %d\n",
+			__func__, reg, ret);
+
+	return ret;
+}
+
 /**
  * tsl2x7x_get_lux() - Reads and calculates current lux value.
  * @indio_dev:	pointer to IIO device
@@ -346,16 +360,9 @@ static int tsl2x7x_get_lux(struct iio_dev *indio_dev)
 		buf[i] = ret;
 	}
 
-	/* clear any existing interrupt status */
-	ret = i2c_smbus_write_byte(chip->client,
-				   TSL2X7X_CMD_REG |
-				   TSL2X7X_CMD_SPL_FN |
-				   TSL2X7X_CMD_ALS_INT_CLR);
-	if (ret < 0) {
-		dev_err(&chip->client->dev,
-			"i2c_write_command failed - err = %d\n", ret);
-		goto out_unlock; /* have no data, so return failure */
-	}
+	ret = tsl2x7x_clear_interrupts(chip, TSL2X7X_CMD_ALS_INT_CLR);
+	if (ret < 0)
+		goto out_unlock;
 
 	/* extract ALS/lux data */
 	ch0 = le16_to_cpup((const __le16 *)&buf[0]);
@@ -706,18 +713,11 @@ static int tsl2x7x_chip_on(struct iio_dev *indio_dev)
 				"%s: failed in tsl2x7x_IOCTL_INT_SET.\n",
 				__func__);
 
-		/* Clear out any initial interrupts  */
-		ret = i2c_smbus_write_byte(chip->client,
-					   TSL2X7X_CMD_REG |
-					   TSL2X7X_CMD_SPL_FN |
+		ret = tsl2x7x_clear_interrupts(chip,
 					       TSL2X7X_CMD_PROXALS_INT_CLR);
-		if (ret < 0) {
-			dev_err(&chip->client->dev,
-				"%s: Failed to clear Int status\n",
-				__func__);
+		if (ret < 0)
 			return ret;
 	}
-	}
 
 	return ret;
 }
@@ -1421,14 +1421,10 @@ static irqreturn_t tsl2x7x_event_handler(int irq, void *private)
 						    IIO_EV_DIR_EITHER),
 			       timestamp);
 	}
-	/* Clear interrupt now that we have handled it. */
-	ret = i2c_smbus_write_byte(chip->client,
-				   TSL2X7X_CMD_REG | TSL2X7X_CMD_SPL_FN |
-				   TSL2X7X_CMD_PROXALS_INT_CLR);
+
+	ret = tsl2x7x_clear_interrupts(chip, TSL2X7X_CMD_PROXALS_INT_CLR);
 	if (ret < 0)
-		dev_err(&chip->client->dev,
-			"Failed to clear irq from event handler. err = %d\n",
-			ret);
+		return ret;
 
 	return IRQ_HANDLED;
 }