Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: fsl_udc_core: Fix kernel oops on module removal
  USB: option: TLAYTECH TUE800 support
  USB: r8a66597-hcd: fix cannot detect a device when uses_new_polling is set
  USB: serial: sierra driver autopm fixes
  USB: serial: sierra driver send_setup() autopm fix
  USB: rndis_host: debug info clobbered before it is logged

drivers/net/usb/rndis_host.c

@@ -362,12 +362,12 @@ generic_rndis_bind(struct usbnet *dev, struct usb_interface *intf, int flags)
 			retval = -EINVAL;
 			goto halt_fail_and_release;
 		}
-		dev->hard_mtu = tmp;
-		net->mtu = dev->hard_mtu - net->hard_header_len;
 		dev_warn(&intf->dev,
 			 "dev can't take %u byte packets (max %u), "
 			 "adjusting MTU to %u\n",
-			 dev->hard_mtu, tmp, net->mtu);
+			 dev->hard_mtu, tmp, tmp - net->hard_header_len);
+		dev->hard_mtu = tmp;
+		net->mtu = dev->hard_mtu - net->hard_header_len;
 	}
 
 	/* REVISIT:  peripheral "alignment" request is ignored ... */

drivers/usb/gadget/fsl_udc_core.c

@@ -2139,7 +2139,7 @@ static int fsl_proc_read(char *page, char **start, off_t off, int count,
 static void fsl_udc_release(struct device *dev)
 {
 	complete(udc_controller->done);
-	dma_free_coherent(dev, udc_controller->ep_qh_size,
+	dma_free_coherent(dev->parent, udc_controller->ep_qh_size,
 			udc_controller->ep_qh, udc_controller->ep_qh_dma);
 	kfree(udc_controller);
 }

drivers/usb/host/r8a66597-hcd.c

@@ -1003,9 +1003,7 @@ static void r8a66597_check_syssts(struct r8a66597 *r8a66597, int port,
 	if (syssts == SE0) {
 		r8a66597_write(r8a66597, ~ATTCH, get_intsts_reg(port));
 		r8a66597_bset(r8a66597, ATTCHE, get_intenb_reg(port));
-		return;
-	}
-
+	} else {
 		if (syssts == FS_JSTS)
 			r8a66597_bset(r8a66597, HSE, get_syscfg_reg(port));
 		else if (syssts == LS_JSTS)
@@ -1016,6 +1014,9 @@ static void r8a66597_check_syssts(struct r8a66597 *r8a66597, int port,
 
 		if (r8a66597->bus_suspended)
 			usb_hcd_resume_root_hub(r8a66597_to_hcd(r8a66597));
+	}
+
+	usb_hcd_poll_rh_status(r8a66597_to_hcd(r8a66597));
 }
 
 /* this function must be called with interrupt disabled */
@@ -1024,6 +1025,8 @@ static void r8a66597_usb_connect(struct r8a66597 *r8a66597, int port)
 	u16 speed = get_rh_usb_speed(r8a66597, port);
 	struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
 
+	rh->port &= ~((1 << USB_PORT_FEAT_HIGHSPEED) |
+		      (1 << USB_PORT_FEAT_LOWSPEED));
 	if (speed == HSMODE)
 		rh->port |= (1 << USB_PORT_FEAT_HIGHSPEED);
 	else if (speed == LSMODE)

drivers/usb/serial/option.c

@@ -315,6 +315,9 @@ static int  option_resume(struct usb_serial *serial);
 #define QISDA_PRODUCT_H20_4515			0x4515
 #define QISDA_PRODUCT_H20_4519			0x4519
 
+/* TLAYTECH PRODUCTS */
+#define TLAYTECH_VENDOR_ID			0x20B9
+#define TLAYTECH_PRODUCT_TEU800			0x1682
 
 /* TOSHIBA PRODUCTS */
 #define TOSHIBA_VENDOR_ID			0x0930
@@ -593,6 +596,7 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ALINK_VENDOR_ID, ALINK_PRODUCT_3GU, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S) },
 	{ USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) },
+	{ USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) },
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);

drivers/usb/serial/sierra.c

@@ -296,7 +296,6 @@ struct sierra_port_private {
 	int dsr_state;
 	int dcd_state;
 	int ri_state;
-
 	unsigned int opened:1;
 };
 
@@ -306,6 +305,8 @@ static int sierra_send_setup(struct usb_serial_port *port)
 	struct sierra_port_private *portdata;
 	__u16 interface = 0;
 	int val = 0;
+	int do_send = 0;
+	int retval;
 
 	dev_dbg(&port->dev, "%s\n", __func__);
 
@@ -324,10 +325,7 @@ static int sierra_send_setup(struct usb_serial_port *port)
 		 */
 		if (port->interrupt_in_urb) {
 			/* send control message */
-			return usb_control_msg(serial->dev,
-				usb_rcvctrlpipe(serial->dev, 0),
-				0x22, 0x21, val, interface,
-				NULL, 0, USB_CTRL_SET_TIMEOUT);
+			do_send = 1;
 		}
 	}
 
@@ -339,12 +337,18 @@ static int sierra_send_setup(struct usb_serial_port *port)
 			interface = 1;
 		else if (port->bulk_out_endpointAddress == 5)
 			interface = 2;
-		return usb_control_msg(serial->dev,
-			usb_rcvctrlpipe(serial->dev, 0),
-			0x22, 0x21, val, interface,
-			NULL, 0, USB_CTRL_SET_TIMEOUT);
+
+		do_send = 1;
 	}
+	if (!do_send)
 		return 0;
+
+	usb_autopm_get_interface(serial->interface);
+	retval = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+		0x22, 0x21, val, interface, NULL, 0, USB_CTRL_SET_TIMEOUT);
+	usb_autopm_put_interface(serial->interface);
+
+	return retval;
 }
 
 static void sierra_set_termios(struct tty_struct *tty,
@@ -773,8 +777,11 @@ static void sierra_close(struct usb_serial_port *port)
 
 	if (serial->dev) {
 		mutex_lock(&serial->disc_mutex);
-		if (!serial->disconnected)
+		if (!serial->disconnected) {
+			serial->interface->needs_remote_wakeup = 0;
+			usb_autopm_get_interface(serial->interface);
 			sierra_send_setup(port);
+		}
 		mutex_unlock(&serial->disc_mutex);
 		spin_lock_irq(&intfdata->susp_lock);
 		portdata->opened = 0;
@@ -788,8 +795,6 @@ static void sierra_close(struct usb_serial_port *port)
 			sierra_release_urb(portdata->in_urbs[i]);
 			portdata->in_urbs[i] = NULL;
 		}
-		usb_autopm_get_interface(serial->interface);
-		serial->interface->needs_remote_wakeup = 0;
 	}
 }
 
@@ -827,6 +832,8 @@ static int sierra_open(struct tty_struct *tty, struct usb_serial_port *port)
 	if (err) {
 		/* get rid of everything as in close */
 		sierra_close(port);
+		/* restore balance for autopm */
+		usb_autopm_put_interface(serial->interface);
 		return err;
 	}
 	sierra_send_setup(port);
@@ -915,7 +922,7 @@ static void sierra_release(struct usb_serial *serial)
 #ifdef CONFIG_PM
 static void stop_read_write_urbs(struct usb_serial *serial)
 {
-	int i, j;
+	int i;
 	struct usb_serial_port *port;
 	struct sierra_port_private *portdata;
 
@@ -923,8 +930,7 @@ static void stop_read_write_urbs(struct usb_serial *serial)
 	for (i = 0; i < serial->num_ports; ++i) {
 		port = serial->port[i];
 		portdata = usb_get_serial_port_data(port);
-		for (j = 0; j < N_IN_URB; j++)
-			usb_kill_urb(portdata->in_urbs[j]);
+		sierra_stop_rx_urbs(port);
 		usb_kill_anchored_urbs(&portdata->active);
 	}
 }