thermal: small style cleanup in mtk_thermal

Remove all checkpatch.pl --strict errors, checks, and warnings.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

drivers/thermal/mtk_thermal.c

@@ -78,7 +78,7 @@
 
 #define TEMP_MONCTL1_PERIOD_UNIT(x)	((x) & 0x3ff)
 
-#define TEMP_MONCTL2_FILTER_INTERVAL(x)	(((x) & 0x3ff)) << 16
+#define TEMP_MONCTL2_FILTER_INTERVAL(x)	(((x) & 0x3ff) << 16)
 #define TEMP_MONCTL2_SENSOR_INTERVAL(x)	((x) & 0x3ff)
 
 #define TEMP_AHBPOLL_ADC_POLL_INTERVAL(x)	(x)
@@ -108,15 +108,15 @@
 #define MT8173_NUM_SENSORS_PER_ZONE	4
 
 /* Layout of the fuses providing the calibration data */
-#define MT8173_CALIB_BUF0_VALID		(1 << 0)
-#define MT8173_CALIB_BUF1_ADC_GE(x)	(((x) >> 22 ) & 0x3ff)
-#define MT8173_CALIB_BUF0_VTS_TS1(x)	(((x) >> 17 ) & 0x1ff)
-#define MT8173_CALIB_BUF0_VTS_TS2(x)	(((x) >> 8 ) & 0x1ff)
-#define MT8173_CALIB_BUF1_VTS_TS3(x)	(((x) >> 0 ) & 0x1ff)
-#define MT8173_CALIB_BUF2_VTS_TS4(x)	(((x) >> 23 ) & 0x1ff)
-#define MT8173_CALIB_BUF2_VTS_TSABB(x)	(((x) >> 14 ) & 0x1ff)
-#define MT8173_CALIB_BUF0_DEGC_CALI(x)	(((x) >> 1 ) & 0x3f)
-#define MT8173_CALIB_BUF0_O_SLOPE(x)	(((x) >> 26 ) & 0x3f)
+#define MT8173_CALIB_BUF0_VALID		BIT(0)
+#define MT8173_CALIB_BUF1_ADC_GE(x)	(((x) >> 22) & 0x3ff)
+#define MT8173_CALIB_BUF0_VTS_TS1(x)	(((x) >> 17) & 0x1ff)
+#define MT8173_CALIB_BUF0_VTS_TS2(x)	(((x) >> 8) & 0x1ff)
+#define MT8173_CALIB_BUF1_VTS_TS3(x)	(((x) >> 0) & 0x1ff)
+#define MT8173_CALIB_BUF2_VTS_TS4(x)	(((x) >> 23) & 0x1ff)
+#define MT8173_CALIB_BUF2_VTS_TSABB(x)	(((x) >> 14) & 0x1ff)
+#define MT8173_CALIB_BUF0_DEGC_CALI(x)	(((x) >> 1) & 0x3f)
+#define MT8173_CALIB_BUF0_O_SLOPE(x)	(((x) >> 26) & 0x3f)
 
 #define THERMAL_NAME    "mtk-thermal"
 
@@ -136,6 +136,7 @@ struct mtk_thermal {
 
 	struct mtk_thermal_bank banks[MT8173_NUM_ZONES];
 
+	/* lock: for getting and putting banks */
 	struct mutex lock;
 
 	/* Calibration values */
@@ -271,11 +272,9 @@ static void mtk_thermal_put_bank(struct mtk_thermal_bank *bank)
 static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank)
 {
 	struct mtk_thermal *mt = bank->mt;
-	int temp, i, max;
+	int i, temp = INT_MIN, max = INT_MIN;
 	u32 raw;
 
-	temp = max = INT_MIN;
-
 	for (i = 0; i < bank_data[bank->id].num_sensors; i++) {
 		raw = readl(mt->thermal_base + sensing_points[i].msr);
 
@@ -416,7 +415,8 @@ static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num,
 
 	writel((1 << cfg->num_sensors) - 1, mt->thermal_base + TEMP_MONCTL0);
 
-	writel(TEMP_ADCWRITECTRL_ADC_PNP_WRITE | TEMP_ADCWRITECTRL_ADC_MUX_WRITE,
+	writel(TEMP_ADCWRITECTRL_ADC_PNP_WRITE |
+	       TEMP_ADCWRITECTRL_ADC_MUX_WRITE,
 	       mt->thermal_base + TEMP_ADCWRITECTRL);
 
 	mtk_thermal_put_bank(bank);
@@ -434,7 +434,8 @@ static u64 of_get_phys_base(struct device_node *np)
 	return of_translate_address(np, regaddr_p);
 }
 
-static int mtk_thermal_get_calibration_data(struct device *dev, struct mtk_thermal *mt)
+static int mtk_thermal_get_calibration_data(struct device *dev,
+					    struct mtk_thermal *mt)
 {
 	struct nvmem_cell *cell;
 	u32 *buf;
@@ -567,7 +568,8 @@ static int mtk_thermal_probe(struct platform_device *pdev)
 	}
 
 	for (i = 0; i < MT8173_NUM_ZONES; i++)
-		mtk_thermal_init_bank(mt, i, apmixed_phys_base, auxadc_phys_base);
+		mtk_thermal_init_bank(mt, i, apmixed_phys_base,
+				      auxadc_phys_base);
 
 	platform_set_drvdata(pdev, mt);