Commit eb6b38b2 authored by Tony Lindgren's avatar Tony Lindgren

ARM: dts: Configure interconnect target module for omap2 sdma

We can now probe devices with device tree only configuration using
ti-sysc interconnect target module driver. Let's configure the
module, but keep the legacy "ti,hwmods" peroperty to avoid new boot
time warnings. The legacy property will be removed in later patches
together with the legacy platform data.

Note that we want to use separate compatible for omap2420 and
omap2430 so let's do that here too while at it.

Cc: devicetree@vger.kernel.org
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Vinod Koul <vkoul@kernel.org>
Acked-by: default avatarPeter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: default avatarPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 65b5969e
......@@ -8,6 +8,7 @@
* kind, whether express or implied.
*/
#include <dt-bindings/bus/ti-sysc.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/omap.h>
......@@ -79,10 +80,30 @@ intc: interrupt-controller@1 {
reg = <0x480FE000 0x1000>;
};
sdma: dma-controller@48056000 {
compatible = "ti,omap2430-sdma", "ti,omap2420-sdma";
target-module@48056000 {
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "dma";
reg = <0x48056000 0x1000>;
reg = <0x48056000 0x4>,
<0x4805602c 0x4>,
<0x48056028 0x4>;
reg-names = "rev", "sysc", "syss";
ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
SYSC_OMAP2_EMUFREE |
SYSC_OMAP2_SOFTRESET |
SYSC_OMAP2_AUTOIDLE)>;
ti,sysc-midle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
ti,syss-mask = <1>;
clocks = <&core_l3_ck>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x48056000 0x1000>;
sdma: dma-controller@0 {
compatible = "ti,omap2420-sdma", "ti,omap-sdma";
reg = <0 0x1000>;
interrupts = <12>,
<13>,
<14>,
......@@ -91,6 +112,7 @@ sdma: dma-controller@48056000 {
dma-channels = <32>;
dma-requests = <64>;
};
};
i2c1: i2c@48070000 {
compatible = "ti,omap2-i2c";
......
......@@ -309,6 +309,10 @@ wd_timer2: wdt@49016000 {
};
};
&sdma {
compatible = "ti,omap2430-sdma", "ti,omap-sdma";
};
&i2c1 {
compatible = "ti,omap2430-i2c";
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment