Merge branch 'mv88e6xxx-vlan-filtering'

Vivien Didelot says:

====================
net: dsa: mv88e6xxx: implement VLAN filtering

This patchset fixes hardware bridging for non 802.1Q aware systems.

The mv88e6xxx DSA driver currently depends on CONFIG_VLAN_8021Q and
CONFIG_BRIDGE_VLAN_FILTERING enabled for correct bridging between switch ports.

Patch 1/9 adds support for the VLAN filtering switchdev attribute in DSA.

Patchs 2/9 and 3/9 add helper functions for the following patches.

Patchs 4/9 to 6/9 assign dynamic address databases to VLANs, ports, and
bridge groups (the lowest available FID is cleared and assigned), and thus
restore support for per-port FDB operations.

Patchs 7/9 to 9/9 refine ports isolation and setup 802.1Q on user demand.

With this patchset, ports get correctly bridged and the driver behaves as
expected, with or without 802.1Q support.

With CONFIG_VLAN_8021Q enabled, setting a default PVID to the bridge correctly
propagates the corresponding VLAN, in addition to the hardware bridging:

    # echo 42 > /sys/class/net/<bridge>/bridge/default_pvid

But considering CONFIG_BRIDGE_VLAN_FILTERING enabled, the hardware VLAN
filtering is enabled on all bridge members only when the user requests it:

    # echo 1 > /sys/class/net/<bridge>/bridge/vlan_filtering
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/dsa/mv88e6171.c

@@ -106,6 +106,7 @@ struct dsa_switch_driver mv88e6171_switch_driver = {
 	.port_join_bridge	= mv88e6xxx_port_bridge_join,
 	.port_leave_bridge	= mv88e6xxx_port_bridge_leave,
 	.port_stp_update        = mv88e6xxx_port_stp_update,
+	.port_vlan_filtering	= mv88e6xxx_port_vlan_filtering,
 	.port_vlan_prepare	= mv88e6xxx_port_vlan_prepare,
 	.port_vlan_add		= mv88e6xxx_port_vlan_add,
 	.port_vlan_del		= mv88e6xxx_port_vlan_del,

drivers/net/dsa/mv88e6352.c

@@ -327,6 +327,7 @@ struct dsa_switch_driver mv88e6352_switch_driver = {
 	.port_join_bridge	= mv88e6xxx_port_bridge_join,
 	.port_leave_bridge	= mv88e6xxx_port_bridge_leave,
 	.port_stp_update	= mv88e6xxx_port_stp_update,
+	.port_vlan_filtering	= mv88e6xxx_port_vlan_filtering,
 	.port_vlan_prepare	= mv88e6xxx_port_vlan_prepare,
 	.port_vlan_add		= mv88e6xxx_port_vlan_add,
 	.port_vlan_del		= mv88e6xxx_port_vlan_del,

drivers/net/dsa/mv88e6xxx.h

@@ -133,7 +133,9 @@
 #define PORT_CONTROL_STATE_LEARNING	0x02
 #define PORT_CONTROL_STATE_FORWARDING	0x03
 #define PORT_CONTROL_1		0x05
+#define PORT_CONTROL_1_FID_11_4_MASK	(0xff << 0)
 #define PORT_BASE_VLAN		0x06
+#define PORT_BASE_VLAN_FID_3_0_MASK	(0xf << 12)
 #define PORT_DEFAULT_VLAN	0x07
 #define PORT_DEFAULT_VLAN_MASK	0xfff
 #define PORT_CONTROL_2		0x08
@@ -355,6 +357,8 @@
 #define GLOBAL2_QOS_WEIGHT	0x1c
 #define GLOBAL2_MISC		0x1d
 
+#define MV88E6XXX_N_FID		4096
+
 struct mv88e6xxx_switch_id {
 	u16 id;
 	char *name;
@@ -486,6 +490,8 @@ int mv88e6xxx_port_bridge_join(struct dsa_switch *ds, int port,
 			       struct net_device *bridge);
 int mv88e6xxx_port_bridge_leave(struct dsa_switch *ds, int port);
 int mv88e6xxx_port_stp_update(struct dsa_switch *ds, int port, u8 state);
+int mv88e6xxx_port_vlan_filtering(struct dsa_switch *ds, int port,
+				  bool vlan_filtering);
 int mv88e6xxx_port_vlan_prepare(struct dsa_switch *ds, int port,
 				const struct switchdev_obj_port_vlan *vlan,
 				struct switchdev_trans *trans);

include/net/dsa.h

@@ -305,6 +305,8 @@ struct dsa_switch_driver {
 	/*
 	 * VLAN support
 	 */
+	int	(*port_vlan_filtering)(struct dsa_switch *ds, int port,
+				       bool vlan_filtering);
 	int	(*port_vlan_prepare)(struct dsa_switch *ds, int port,
 				     const struct switchdev_obj_port_vlan *vlan,
 				     struct switchdev_trans *trans);

net/dsa/slave.c

@@ -317,6 +317,24 @@ static int dsa_slave_stp_update(struct net_device *dev, u8 state)
 	return ret;
 }
 
+static int dsa_slave_vlan_filtering(struct net_device *dev,
+				    const struct switchdev_attr *attr,
+				    struct switchdev_trans *trans)
+{
+	struct dsa_slave_priv *p = netdev_priv(dev);
+	struct dsa_switch *ds = p->parent;
+
+	/* bridge skips -EOPNOTSUPP, so skip the prepare phase */
+	if (switchdev_trans_ph_prepare(trans))
+		return 0;
+
+	if (ds->drv->port_vlan_filtering)
+		return ds->drv->port_vlan_filtering(ds, p->port,
+						    attr->u.vlan_filtering);
+
+	return 0;
+}
+
 static int dsa_slave_port_attr_set(struct net_device *dev,
 				   const struct switchdev_attr *attr,
 				   struct switchdev_trans *trans)
@@ -333,6 +351,9 @@ static int dsa_slave_port_attr_set(struct net_device *dev,
 			ret = ds->drv->port_stp_update(ds, p->port,
 						       attr->u.stp_state);
 		break;
+	case SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING:
+		ret = dsa_slave_vlan_filtering(dev, attr, trans);
+		break;
 	default:
 		ret = -EOPNOTSUPP;
 		break;