dmaengine: remove sirfsoc driver

The CSR SiRF prima2/atlas platforms are getting removed, so this driver
is no longer needed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Barry Song <baohua@kernel.org>
Cc: Barry Song <baohua@kernel.org>
Link: https://lore.kernel.org/r/20210120131859.2056308-2-arnd@kernel.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Documentation/devicetree/bindings/dma/sirfsoc-dma.txt

-* CSR SiRFSoC DMA controller
-
-See dma.txt first
-
-Required properties:
-- compatible: Should be "sirf,prima2-dmac", "sirf,atlas7-dmac" or
-  "sirf,atlas7-dmac-v2"
-- reg: Should contain DMA registers location and length.
-- interrupts: Should contain one interrupt shared by all channel
-- #dma-cells: must be <1>. used to represent the number of integer
-    cells in the dmas property of client device.
-- clocks: clock required
-
-Example:
-
-Controller:
-dmac0: dma-controller@b00b0000 {
-	compatible = "sirf,prima2-dmac";
-	reg = <0xb00b0000 0x10000>;
-	interrupts = <12>;
-	clocks = <&clks 24>;
-	#dma-cells = <1>;
-};
-
-
-Client:
-Fill the specific dma request line in dmas. In the below example, spi0 read
-channel request line is 9 of the 2nd dma controller, while write channel uses
-4 of the 2nd dma controller; spi1 read channel request line is 12 of the 1st
-dma controller, while write channel uses 13 of the 1st dma controller:
-
-spi0: spi@b00d0000 {
-	compatible = "sirf,prima2-spi";
-	dmas = <&dmac1 9>,
-		<&dmac1 4>;
-	dma-names = "rx", "tx";
-};
-
-spi1: spi@b0170000 {
-	compatible = "sirf,prima2-spi";
-	dmas = <&dmac0 12>,
-		<&dmac0 13>;
-	dma-names = "rx", "tx";
-};

drivers/dma/Kconfig

@@ -519,13 +519,6 @@ config PLX_DMA
 	  These are exposed via extra functions on the switch's
 	  upstream port. Each function exposes one DMA channel.
 
-config SIRF_DMA
-	tristate "CSR SiRFprimaII/SiRFmarco DMA support"
-	depends on ARCH_SIRF
-	select DMA_ENGINE
-	help
-	  Enable support for the CSR SiRFprimaII DMA engine.
-
 config STE_DMA40
 	bool "ST-Ericsson DMA40 support"
 	depends on ARCH_U8500

drivers/dma/Makefile

@@ -65,7 +65,6 @@ obj-$(CONFIG_PPC_BESTCOMM) += bestcomm/
 obj-$(CONFIG_PXA_DMA) += pxa_dma.o
 obj-$(CONFIG_RENESAS_DMA) += sh/
 obj-$(CONFIG_SF_PDMA) += sf-pdma/
-obj-$(CONFIG_SIRF_DMA) += sirf-dma.o
 obj-$(CONFIG_STE_DMA40) += ste_dma40.o ste_dma40_ll.o
 obj-$(CONFIG_STM32_DMA) += stm32-dma.o
 obj-$(CONFIG_STM32_DMAMUX) += stm32-dmamux.o

include/linux/sirfsoc_dma.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _SIRFSOC_DMA_H_
-#define _SIRFSOC_DMA_H_
-
-bool sirfsoc_dma_filter_id(struct dma_chan *chan, void *chan_id);
-
-#endif