Commit eccb7a00 authored by Arnd Bergmann's avatar Arnd Bergmann Committed by Andy Shevchenko

gpiolib: remove asm-generic/gpio.h

The asm-generic/gpio.h file is now always included when
using gpiolib, so just move its contents into linux/gpio.h
with a few minor simplifications.
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
Reviewed-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Reviewed-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
parent 94d20f7d
...@@ -8752,7 +8752,6 @@ F: Documentation/admin-guide/gpio/ ...@@ -8752,7 +8752,6 @@ F: Documentation/admin-guide/gpio/
F: Documentation/devicetree/bindings/gpio/ F: Documentation/devicetree/bindings/gpio/
F: Documentation/driver-api/gpio/ F: Documentation/driver-api/gpio/
F: drivers/gpio/ F: drivers/gpio/
F: include/asm-generic/gpio.h
F: include/dt-bindings/gpio/ F: include/dt-bindings/gpio/
F: include/linux/gpio.h F: include/linux/gpio.h
F: include/linux/gpio/ F: include/linux/gpio/
......
...@@ -9,7 +9,7 @@ ...@@ -9,7 +9,7 @@
#define mcfgpio_h #define mcfgpio_h
#ifdef CONFIG_GPIOLIB #ifdef CONFIG_GPIOLIB
#include <asm-generic/gpio.h> #include <linux/gpio.h>
#else #else
int __mcfgpio_get_value(unsigned gpio); int __mcfgpio_get_value(unsigned gpio);
......
...@@ -24,8 +24,6 @@ ...@@ -24,8 +24,6 @@
#include <linux/spinlock.h> #include <linux/spinlock.h>
#include <linux/pm_runtime.h> #include <linux/pm_runtime.h>
#include <asm-generic/gpio.h>
#define MAX_REGS_BANKS 5 #define MAX_REGS_BANKS 5
#define MAX_INT_PER_BANK 32 #define MAX_INT_PER_BANK 32
......
...@@ -30,7 +30,6 @@ ...@@ -30,7 +30,6 @@
#ifdef CONFIG_GPIOLIB #ifdef CONFIG_GPIOLIB
#include "../gpio/gpiolib.h" #include "../gpio/gpiolib.h"
#include <asm-generic/gpio.h>
#endif #endif
#include "core.h" #include "core.h"
......
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _ASM_GENERIC_GPIO_H
#define _ASM_GENERIC_GPIO_H
#include <linux/types.h>
#include <linux/errno.h>
#ifdef CONFIG_GPIOLIB
#include <linux/compiler.h>
#include <linux/gpio/consumer.h>
/*
* Platforms may implement their GPIO interface with library code,
* at a small performance cost for non-inlined operations and some
* extra memory (for code and for per-GPIO table entries).
*/
/*
* At the end we want all GPIOs to be dynamically allocated from 0.
* However, some legacy drivers still perform fixed allocation.
* Until they are all fixed, leave 0-512 space for them.
*/
#define GPIO_DYNAMIC_BASE 512
struct device;
struct gpio;
struct seq_file;
struct module;
struct device_node;
struct gpio_desc;
/* Always use the library code for GPIO management calls,
* or when sleeping may be involved.
*/
extern int gpio_request(unsigned gpio, const char *label);
extern void gpio_free(unsigned gpio);
static inline int gpio_direction_input(unsigned gpio)
{
return gpiod_direction_input(gpio_to_desc(gpio));
}
static inline int gpio_direction_output(unsigned gpio, int value)
{
return gpiod_direction_output_raw(gpio_to_desc(gpio), value);
}
static inline int gpio_set_debounce(unsigned gpio, unsigned debounce)
{
return gpiod_set_debounce(gpio_to_desc(gpio), debounce);
}
static inline int gpio_get_value_cansleep(unsigned gpio)
{
return gpiod_get_raw_value_cansleep(gpio_to_desc(gpio));
}
static inline void gpio_set_value_cansleep(unsigned gpio, int value)
{
return gpiod_set_raw_value_cansleep(gpio_to_desc(gpio), value);
}
/* A platform's <asm/gpio.h> code may want to inline the I/O calls when
* the GPIO is constant and refers to some always-present controller,
* giving direct access to chip registers and tight bitbanging loops.
*/
static inline int __gpio_get_value(unsigned gpio)
{
return gpiod_get_raw_value(gpio_to_desc(gpio));
}
static inline void __gpio_set_value(unsigned gpio, int value)
{
return gpiod_set_raw_value(gpio_to_desc(gpio), value);
}
static inline int __gpio_cansleep(unsigned gpio)
{
return gpiod_cansleep(gpio_to_desc(gpio));
}
static inline int __gpio_to_irq(unsigned gpio)
{
return gpiod_to_irq(gpio_to_desc(gpio));
}
extern int gpio_request_one(unsigned gpio, unsigned long flags, const char *label);
extern int gpio_request_array(const struct gpio *array, size_t num);
extern void gpio_free_array(const struct gpio *array, size_t num);
/*
* A sysfs interface can be exported by individual drivers if they want,
* but more typically is configured entirely from userspace.
*/
static inline int gpio_export(unsigned gpio, bool direction_may_change)
{
return gpiod_export(gpio_to_desc(gpio), direction_may_change);
}
static inline void gpio_unexport(unsigned gpio)
{
gpiod_unexport(gpio_to_desc(gpio));
}
#else /* !CONFIG_GPIOLIB */
#include <linux/kernel.h>
/* platforms that don't directly support access to GPIOs through I2C, SPI,
* or other blocking infrastructure can use these wrappers.
*/
static inline int gpio_cansleep(unsigned gpio)
{
return 0;
}
static inline int gpio_get_value_cansleep(unsigned gpio)
{
might_sleep();
return __gpio_get_value(gpio);
}
static inline void gpio_set_value_cansleep(unsigned gpio, int value)
{
might_sleep();
__gpio_set_value(gpio, value);
}
#endif /* !CONFIG_GPIOLIB */
/*
* "valid" GPIO numbers are nonnegative and may be passed to
* setup routines like gpio_request(). only some valid numbers
* can successfully be requested and used.
*
* Invalid GPIO numbers are useful for indicating no-such-GPIO in
* platform data and other tables.
*/
static inline bool gpio_is_valid(int number)
{
/* only non-negative numbers are valid */
return number >= 0;
}
#endif /* _ASM_GENERIC_GPIO_H */
...@@ -13,6 +13,7 @@ ...@@ -13,6 +13,7 @@
#define __LINUX_GPIO_H #define __LINUX_GPIO_H
#include <linux/errno.h> #include <linux/errno.h>
#include <linux/types.h>
/* see Documentation/driver-api/gpio/legacy.rst */ /* see Documentation/driver-api/gpio/legacy.rst */
...@@ -54,26 +55,100 @@ struct gpio { ...@@ -54,26 +55,100 @@ struct gpio {
}; };
#ifdef CONFIG_GPIOLIB #ifdef CONFIG_GPIOLIB
#include <asm-generic/gpio.h>
static inline int gpio_get_value(unsigned int gpio) #include <linux/gpio/consumer.h>
/*
* "valid" GPIO numbers are nonnegative and may be passed to
* setup routines like gpio_request(). Only some valid numbers
* can successfully be requested and used.
*
* Invalid GPIO numbers are useful for indicating no-such-GPIO in
* platform data and other tables.
*/
static inline bool gpio_is_valid(int number)
{
/* only non-negative numbers are valid */
return number >= 0;
}
/*
* Platforms may implement their GPIO interface with library code,
* at a small performance cost for non-inlined operations and some
* extra memory (for code and for per-GPIO table entries).
*/
/*
* At the end we want all GPIOs to be dynamically allocated from 0.
* However, some legacy drivers still perform fixed allocation.
* Until they are all fixed, leave 0-512 space for them.
*/
#define GPIO_DYNAMIC_BASE 512
/* Always use the library code for GPIO management calls,
* or when sleeping may be involved.
*/
int gpio_request(unsigned gpio, const char *label);
void gpio_free(unsigned gpio);
static inline int gpio_direction_input(unsigned gpio)
{
return gpiod_direction_input(gpio_to_desc(gpio));
}
static inline int gpio_direction_output(unsigned gpio, int value)
{
return gpiod_direction_output_raw(gpio_to_desc(gpio), value);
}
static inline int gpio_set_debounce(unsigned gpio, unsigned debounce)
{
return gpiod_set_debounce(gpio_to_desc(gpio), debounce);
}
static inline int gpio_get_value_cansleep(unsigned gpio)
{
return gpiod_get_raw_value_cansleep(gpio_to_desc(gpio));
}
static inline void gpio_set_value_cansleep(unsigned gpio, int value)
{ {
return __gpio_get_value(gpio); return gpiod_set_raw_value_cansleep(gpio_to_desc(gpio), value);
} }
static inline void gpio_set_value(unsigned int gpio, int value) static inline int gpio_get_value(unsigned gpio)
{
return gpiod_get_raw_value(gpio_to_desc(gpio));
}
static inline void gpio_set_value(unsigned gpio, int value)
{ {
__gpio_set_value(gpio, value); return gpiod_set_raw_value(gpio_to_desc(gpio), value);
} }
static inline int gpio_cansleep(unsigned int gpio) static inline int gpio_cansleep(unsigned gpio)
{ {
return __gpio_cansleep(gpio); return gpiod_cansleep(gpio_to_desc(gpio));
} }
static inline int gpio_to_irq(unsigned int gpio) static inline int gpio_to_irq(unsigned gpio)
{ {
return __gpio_to_irq(gpio); return gpiod_to_irq(gpio_to_desc(gpio));
}
int gpio_request_one(unsigned gpio, unsigned long flags, const char *label);
int gpio_request_array(const struct gpio *array, size_t num);
void gpio_free_array(const struct gpio *array, size_t num);
/*
* A sysfs interface can be exported by individual drivers if they want,
* but more typically is configured entirely from userspace.
*/
static inline int gpio_export(unsigned gpio, bool direction_may_change)
{
return gpiod_export(gpio_to_desc(gpio), direction_may_change);
}
static inline void gpio_unexport(unsigned gpio)
{
gpiod_unexport(gpio_to_desc(gpio));
} }
/* CONFIG_GPIOLIB: bindings for managed devices that want to request gpios */ /* CONFIG_GPIOLIB: bindings for managed devices that want to request gpios */
...@@ -88,7 +163,6 @@ int devm_gpio_request_one(struct device *dev, unsigned gpio, ...@@ -88,7 +163,6 @@ int devm_gpio_request_one(struct device *dev, unsigned gpio,
#include <linux/bug.h> #include <linux/bug.h>
#include <linux/kernel.h> #include <linux/kernel.h>
#include <linux/types.h>
struct device; struct device;
struct gpio_chip; struct gpio_chip;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment