ABI: sysfs-mce: add a new ABI file

Reduce the gap of missing ABIs for Intel servers with MCE
by adding a new ABI file.

The contents of this file comes from:
	Documentation/x86/x86_64/machinecheck.rst
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/801a26985e32589eb78ba4b728d3e19fdea18f04.1632994837.git.mchehab+huawei@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation/ABI/testing/sysfs-mce

+What:		/sys/devices/system/machinecheck/machinecheckX/
+Contact:	Andi Kleen <ak@linux.intel.com>
+Date:		Feb, 2007
+Description:
+		(X = CPU number)
+
+		Machine checks report internal hardware error conditions
+		detected by the CPU. Uncorrected errors typically cause a
+		machine check (often with panic), corrected ones cause a
+		machine check log entry.
+
+		For more details about the x86 machine check architecture
+		see the Intel and AMD architecture manuals from their
+		developer websites.
+
+		For more details about the architecture
+		see http://one.firstfloor.org/~andi/mce.pdf
+
+		Each CPU has its own directory.
+
+What:		/sys/devices/system/machinecheck/machinecheckX/bank<Y>
+Contact:	Andi Kleen <ak@linux.intel.com>
+Date:		Feb, 2007
+Description:
+		(Y bank number)
+
+		64bit Hex bitmask enabling/disabling specific subevents for
+		bank Y.
+
+		When a bit in the bitmask is zero then the respective
+		subevent will not be reported.
+
+		By default all events are enabled.
+
+		Note that BIOS maintain another mask to disable specific events
+		per bank.  This is not visible here
+
+What:		/sys/devices/system/machinecheck/machinecheckX/check_interval
+Contact:	Andi Kleen <ak@linux.intel.com>
+Date:		Feb, 2007
+Description:
+		The entries appear for each CPU, but they are truly shared
+		between all CPUs.
+
+		How often to poll for corrected machine check errors, in
+		seconds (Note output is hexadecimal). Default 5 minutes.
+		When the poller finds MCEs it triggers an exponential speedup
+		(poll more often) on the polling interval.  When the poller
+		stops finding MCEs, it triggers an exponential backoff
+		(poll less often) on the polling interval. The check_interval
+		variable is both the initial and maximum polling interval.
+		0 means no polling for corrected machine check errors
+		(but some corrected errors might be still reported
+		in other ways)
+
+What:		/sys/devices/system/machinecheck/machinecheckX/tolerant
+Contact:	Andi Kleen <ak@linux.intel.com>
+Date:		Feb, 2007
+Description:
+		The entries appear for each CPU, but they are truly shared
+		between all CPUs.
+
+		Tolerance level. When a machine check exception occurs for a
+		non corrected machine check the kernel can take different
+		actions.
+
+		Since machine check exceptions can happen any time it is
+		sometimes risky for the kernel to kill a process because it
+		defies normal kernel locking rules. The tolerance level
+		configures how hard the kernel tries to recover even at some
+		risk of	deadlock. Higher tolerant values trade potentially
+		better uptime with the risk of a crash or even corruption
+		(for tolerant >= 3).
+
+		==  ===========================================================
+		 0  always panic on uncorrected errors, log corrected errors
+		 1  panic or SIGBUS on uncorrected errors, log corrected errors
+		 2  SIGBUS or log uncorrected errors, log corrected errors
+		 3  never panic or SIGBUS, log all errors (for testing only)
+		==  ===========================================================
+
+		Default: 1
+
+		Note this only makes a difference if the CPU allows recovery
+		from a machine check exception. Current x86 CPUs generally
+		do not.
+
+What:		/sys/devices/system/machinecheck/machinecheckX/trigger
+Contact:	Andi Kleen <ak@linux.intel.com>
+Date:		Feb, 2007
+Description:
+		The entries appear for each CPU, but they are truly shared
+		between all CPUs.
+
+		Program to run when a machine check event is detected.
+		This is an alternative to running mcelog regularly from cron
+		and allows to detect events faster.
+
+What:		/sys/devices/system/machinecheck/machinecheckX/monarch_timeout
+Contact:	Andi Kleen <ak@linux.intel.com>
+Date:		Feb, 2007
+Description:
+		How long to wait for the other CPUs to machine check too on a
+		exception. 0 to disable waiting for other CPUs.
+
+		Unit: us
+

Documentation/x86/x86_64/machinecheck.rst

@@ -21,60 +21,8 @@ from /dev/mcelog. Normally mcelog should be run regularly from a cronjob.
 Each CPU has a directory in /sys/devices/system/machinecheck/machinecheckN
 (N = CPU number).
 
-The directory contains some configurable entries:
-
-bankNctl
-	(N bank number)
-
-	64bit Hex bitmask enabling/disabling specific subevents for bank N
-	When a bit in the bitmask is zero then the respective
-	subevent will not be reported.
-	By default all events are enabled.
-	Note that BIOS maintain another mask to disable specific events
-	per bank.  This is not visible here
-
-The following entries appear for each CPU, but they are truly shared
-between all CPUs.
-
-check_interval
-	How often to poll for corrected machine check errors, in seconds
-	(Note output is hexadecimal). Default 5 minutes.  When the poller
-	finds MCEs it triggers an exponential speedup (poll more often) on
-	the polling interval.  When the poller stops finding MCEs, it
-	triggers an exponential backoff (poll less often) on the polling
-	interval. The check_interval variable is both the initial and
-	maximum polling interval. 0 means no polling for corrected machine
-	check errors (but some corrected errors might be still reported
-	in other ways)
-
-tolerant
-	Tolerance level. When a machine check exception occurs for a non
-	corrected machine check the kernel can take different actions.
-	Since machine check exceptions can happen any time it is sometimes
-	risky for the kernel to kill a process because it defies
-	normal kernel locking rules. The tolerance level configures
-	how hard the kernel tries to recover even at some risk of
-	deadlock.  Higher tolerant values trade potentially better uptime
-	with the risk of a crash or even corruption (for tolerant >= 3).
-
-	0: always panic on uncorrected errors, log corrected errors
-	1: panic or SIGBUS on uncorrected errors, log corrected errors
-	2: SIGBUS or log uncorrected errors, log corrected errors
-	3: never panic or SIGBUS, log all errors (for testing only)
-
-	Default: 1
-
-	Note this only makes a difference if the CPU allows recovery
-	from a machine check exception. Current x86 CPUs generally do not.
-
-trigger
-	Program to run when a machine check event is detected.
-	This is an alternative to running mcelog regularly from cron
-	and allows to detect events faster.
-monarch_timeout
-	How long to wait for the other CPUs to machine check too on a
-	exception. 0 to disable waiting for other CPUs.
-	Unit: us
+The directory contains some configurable entries. See
+Documentation/ABI/testing/sysfs-mce for more details.
 
 TBD document entries for AMD threshold interrupt configuration
 

MAINTAINERS

@@ -20353,6 +20353,8 @@ M:	Tony Luck <tony.luck@intel.com>
 M:	Borislav Petkov <bp@alien8.de>
 L:	linux-edac@vger.kernel.org
 S:	Maintained
+F:	Documentation/ABI/testing/sysfs-mce
+F:	Documentation/x86/x86_64/machinecheck.rst
 F:	arch/x86/kernel/cpu/mce/*
 
 X86 MICROCODE UPDATE SUPPORT