Commit ee5e5e7a authored by Sean Paul's avatar Sean Paul

drm/i915: Add HDCP framework + base implementation

This patch adds the framework required to add HDCP support to intel
connectors. It implements Aksv loading from fuse, and parts 1/2/3
of the HDCP authentication scheme.

Note that without shim implementations, this does not actually implement
HDCP. That will come in subsequent patches.

Changes in v2:
- Don't open code wait_fors (Chris)
- drm_hdcp.c under MIT license (Daniel)
- Move intel_hdcp_disable() call above ddi_disable (Ram)
- Fix // comments (I wore a cone of shame for 12 hours to atone) (Daniel)
- Justify intel_hdcp_shim with comments (Daniel)
- Fixed async locking issues by adding hdcp_mutex (Daniel)
- Don't alter connector_state in enable/disable (Daniel)
Changes in v3:
- Added hdcp_mutex/hdcp_value to make async reasonable
- Added hdcp_prop_work to separate link checking & property setting
- Added new helper for atomic_check state tracking (Daniel)
- Moved enable/disable into atomic_commit with matching helpers
- Moved intel_hdcp_check_link out of all locks when called from dp
- Bumped up ksv_fifo timeout (noticed failure on one of my dongles)
Changes in v4:
- Remove SKL_ prefix from most register names (Daniel)
- Move enable/disable back to modeset path (Daniel)
- s/get_random_long/get_random_u32/ (Daniel)
- Remove mode_config.mutex lock in prop_work (Daniel)
- Add intel_hdcp_init to handle init of conn components (Daniel)
- Actually check return value of attach_property
- Check Bksv is valid before trying to authenticate (Ram)
Changes in v5:
- checkpatch whitespace changes
- s/DRM_MODE_CONTENT_PROTECTION_OFF/DRM_MODE_CONTENT_PROTECTION_UNDESIRED/
- Fix ksv list wait timeout (actually wait 5s)
- Increase the R0 timeout to 300ms (Ram)
Changes in v6:
- SPDX license

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: default avatarRamalingam C <ramalingm.c@intel.com>
Reviewed-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: default avatarSean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180108195545.218615-6-seanpaul@chromium.org
parent 495eb7f8
......@@ -108,6 +108,7 @@ i915-y += intel_audio.o \
intel_fbc.o \
intel_fifo_underrun.o \
intel_frontbuffer.o \
intel_hdcp.o \
intel_hotplug.o \
intel_modes.o \
intel_overlay.o \
......
......@@ -8043,6 +8043,7 @@ enum {
#define GEN9_MEM_LATENCY_LEVEL_1_5_SHIFT 8
#define GEN9_MEM_LATENCY_LEVEL_2_6_SHIFT 16
#define GEN9_MEM_LATENCY_LEVEL_3_7_SHIFT 24
#define SKL_PCODE_LOAD_HDCP_KEYS 0x5
#define SKL_PCODE_CDCLK_CONTROL 0x7
#define SKL_CDCLK_PREPARE_FOR_CHANGE 0x3
#define SKL_CDCLK_READY_FOR_CHANGE 0x1
......@@ -8345,6 +8346,88 @@ enum skl_power_gate {
#define SKL_PW_TO_PG(pw) ((pw) - SKL_DISP_PW_1 + SKL_PG1)
#define SKL_FUSE_PG_DIST_STATUS(pg) (1 << (27 - (pg)))
/* HDCP Key Registers */
#define HDCP_KEY_CONF _MMIO(0x66c00)
#define HDCP_AKSV_SEND_TRIGGER BIT(31)
#define HDCP_CLEAR_KEYS_TRIGGER BIT(30)
#define HDCP_KEY_STATUS _MMIO(0x66c04)
#define HDCP_FUSE_IN_PROGRESS BIT(7)
#define HDCP_FUSE_ERROR BIT(6)
#define HDCP_FUSE_DONE BIT(5)
#define HDCP_KEY_LOAD_STATUS BIT(1)
#define HDCP_KEY_LOAD_DONE BIT(0)
#define HDCP_AKSV_LO _MMIO(0x66c10)
#define HDCP_AKSV_HI _MMIO(0x66c14)
/* HDCP Repeater Registers */
#define HDCP_REP_CTL _MMIO(0x66d00)
#define HDCP_DDIB_REP_PRESENT BIT(30)
#define HDCP_DDIA_REP_PRESENT BIT(29)
#define HDCP_DDIC_REP_PRESENT BIT(28)
#define HDCP_DDID_REP_PRESENT BIT(27)
#define HDCP_DDIF_REP_PRESENT BIT(26)
#define HDCP_DDIE_REP_PRESENT BIT(25)
#define HDCP_DDIB_SHA1_M0 (1 << 20)
#define HDCP_DDIA_SHA1_M0 (2 << 20)
#define HDCP_DDIC_SHA1_M0 (3 << 20)
#define HDCP_DDID_SHA1_M0 (4 << 20)
#define HDCP_DDIF_SHA1_M0 (5 << 20)
#define HDCP_DDIE_SHA1_M0 (6 << 20) /* Bspec says 5? */
#define HDCP_SHA1_BUSY BIT(16)
#define HDCP_SHA1_READY BIT(17)
#define HDCP_SHA1_COMPLETE BIT(18)
#define HDCP_SHA1_V_MATCH BIT(19)
#define HDCP_SHA1_TEXT_32 (1 << 1)
#define HDCP_SHA1_COMPLETE_HASH (2 << 1)
#define HDCP_SHA1_TEXT_24 (4 << 1)
#define HDCP_SHA1_TEXT_16 (5 << 1)
#define HDCP_SHA1_TEXT_8 (6 << 1)
#define HDCP_SHA1_TEXT_0 (7 << 1)
#define HDCP_SHA_V_PRIME_H0 _MMIO(0x66d04)
#define HDCP_SHA_V_PRIME_H1 _MMIO(0x66d08)
#define HDCP_SHA_V_PRIME_H2 _MMIO(0x66d0C)
#define HDCP_SHA_V_PRIME_H3 _MMIO(0x66d10)
#define HDCP_SHA_V_PRIME_H4 _MMIO(0x66d14)
#define HDCP_SHA_V_PRIME(h) _MMIO((0x66d04 + h * 4))
#define HDCP_SHA_TEXT _MMIO(0x66d18)
/* HDCP Auth Registers */
#define _PORTA_HDCP_AUTHENC 0x66800
#define _PORTB_HDCP_AUTHENC 0x66500
#define _PORTC_HDCP_AUTHENC 0x66600
#define _PORTD_HDCP_AUTHENC 0x66700
#define _PORTE_HDCP_AUTHENC 0x66A00
#define _PORTF_HDCP_AUTHENC 0x66900
#define _PORT_HDCP_AUTHENC(port, x) _MMIO(_PICK(port, \
_PORTA_HDCP_AUTHENC, \
_PORTB_HDCP_AUTHENC, \
_PORTC_HDCP_AUTHENC, \
_PORTD_HDCP_AUTHENC, \
_PORTE_HDCP_AUTHENC, \
_PORTF_HDCP_AUTHENC) + x)
#define PORT_HDCP_CONF(port) _PORT_HDCP_AUTHENC(port, 0x0)
#define HDCP_CONF_CAPTURE_AN BIT(0)
#define HDCP_CONF_AUTH_AND_ENC (BIT(1) | BIT(0))
#define PORT_HDCP_ANINIT(port) _PORT_HDCP_AUTHENC(port, 0x4)
#define PORT_HDCP_ANLO(port) _PORT_HDCP_AUTHENC(port, 0x8)
#define PORT_HDCP_ANHI(port) _PORT_HDCP_AUTHENC(port, 0xC)
#define PORT_HDCP_BKSVLO(port) _PORT_HDCP_AUTHENC(port, 0x10)
#define PORT_HDCP_BKSVHI(port) _PORT_HDCP_AUTHENC(port, 0x14)
#define PORT_HDCP_RPRIME(port) _PORT_HDCP_AUTHENC(port, 0x18)
#define PORT_HDCP_STATUS(port) _PORT_HDCP_AUTHENC(port, 0x1C)
#define HDCP_STATUS_STREAM_A_ENC BIT(31)
#define HDCP_STATUS_STREAM_B_ENC BIT(30)
#define HDCP_STATUS_STREAM_C_ENC BIT(29)
#define HDCP_STATUS_STREAM_D_ENC BIT(28)
#define HDCP_STATUS_AUTH BIT(21)
#define HDCP_STATUS_ENC BIT(20)
#define HDCP_STATUS_RI_MATCH BIT(19)
#define HDCP_STATUS_R0_READY BIT(18)
#define HDCP_STATUS_AN_READY BIT(17)
#define HDCP_STATUS_CIPHER BIT(16)
#define HDCP_STATUS_FRAME_CNT(x) ((x >> 8) & 0xff)
/* Per-pipe DDI Function Control */
#define _TRANS_DDI_FUNC_CTL_A 0x60400
#define _TRANS_DDI_FUNC_CTL_B 0x61400
......
......@@ -110,6 +110,8 @@ int intel_digital_connector_atomic_check(struct drm_connector *conn,
to_intel_digital_connector_state(old_state);
struct drm_crtc_state *crtc_state;
intel_hdcp_atomic_check(conn, old_state, new_state);
if (!new_state->crtc)
return 0;
......
......@@ -2423,6 +2423,11 @@ static void intel_enable_ddi(struct intel_encoder *encoder,
intel_enable_ddi_hdmi(encoder, crtc_state, conn_state);
else
intel_enable_ddi_dp(encoder, crtc_state, conn_state);
/* Enable hdcp if it's desired */
if (conn_state->content_protection ==
DRM_MODE_CONTENT_PROTECTION_DESIRED)
intel_hdcp_enable(to_intel_connector(conn_state->connector));
}
static void intel_disable_ddi_dp(struct intel_encoder *encoder,
......@@ -2457,6 +2462,8 @@ static void intel_disable_ddi(struct intel_encoder *encoder,
const struct intel_crtc_state *old_crtc_state,
const struct drm_connector_state *old_conn_state)
{
intel_hdcp_disable(to_intel_connector(old_conn_state->connector));
if (intel_crtc_has_type(old_crtc_state, INTEL_OUTPUT_HDMI))
intel_disable_ddi_hdmi(encoder, old_crtc_state, old_conn_state);
else
......
......@@ -15217,6 +15217,10 @@ static void intel_hpd_poll_fini(struct drm_device *dev)
for_each_intel_connector_iter(connector, &conn_iter) {
if (connector->modeset_retry_work.func)
cancel_work_sync(&connector->modeset_retry_work);
if (connector->hdcp_shim) {
cancel_delayed_work_sync(&connector->hdcp_check_work);
cancel_work_sync(&connector->hdcp_prop_work);
}
}
drm_connector_list_iter_end(&conn_iter);
}
......
......@@ -301,6 +301,76 @@ struct intel_panel {
} backlight;
};
/*
* This structure serves as a translation layer between the generic HDCP code
* and the bus-specific code. What that means is that HDCP over HDMI differs
* from HDCP over DP, so to account for these differences, we need to
* communicate with the receiver through this shim.
*
* For completeness, the 2 buses differ in the following ways:
* - DP AUX vs. DDC
* HDCP registers on the receiver are set via DP AUX for DP, and
* they are set via DDC for HDMI.
* - Receiver register offsets
* The offsets of the registers are different for DP vs. HDMI
* - Receiver register masks/offsets
* For instance, the ready bit for the KSV fifo is in a different
* place on DP vs HDMI
* - Receiver register names
* Seriously. In the DP spec, the 16-bit register containing
* downstream information is called BINFO, on HDMI it's called
* BSTATUS. To confuse matters further, DP has a BSTATUS register
* with a completely different definition.
* - KSV FIFO
* On HDMI, the ksv fifo is read all at once, whereas on DP it must
* be read 3 keys at a time
* - Aksv output
* Since Aksv is hidden in hardware, there's different procedures
* to send it over DP AUX vs DDC
*/
struct intel_hdcp_shim {
/* Outputs the transmitter's An and Aksv values to the receiver. */
int (*write_an_aksv)(struct intel_digital_port *intel_dig_port, u8 *an);
/* Reads the receiver's key selection vector */
int (*read_bksv)(struct intel_digital_port *intel_dig_port, u8 *bksv);
/*
* Reads BINFO from DP receivers and BSTATUS from HDMI receivers. The
* definitions are the same in the respective specs, but the names are
* different. Call it BSTATUS since that's the name the HDMI spec
* uses and it was there first.
*/
int (*read_bstatus)(struct intel_digital_port *intel_dig_port,
u8 *bstatus);
/* Determines whether a repeater is present downstream */
int (*repeater_present)(struct intel_digital_port *intel_dig_port,
bool *repeater_present);
/* Reads the receiver's Ri' value */
int (*read_ri_prime)(struct intel_digital_port *intel_dig_port, u8 *ri);
/* Determines if the receiver's KSV FIFO is ready for consumption */
int (*read_ksv_ready)(struct intel_digital_port *intel_dig_port,
bool *ksv_ready);
/* Reads the ksv fifo for num_downstream devices */
int (*read_ksv_fifo)(struct intel_digital_port *intel_dig_port,
int num_downstream, u8 *ksv_fifo);
/* Reads a 32-bit part of V' from the receiver */
int (*read_v_prime_part)(struct intel_digital_port *intel_dig_port,
int i, u32 *part);
/* Enables HDCP signalling on the port */
int (*toggle_signalling)(struct intel_digital_port *intel_dig_port,
bool enable);
/* Ensures the link is still protected */
bool (*check_link)(struct intel_digital_port *intel_dig_port);
};
struct intel_connector {
struct drm_connector base;
/*
......@@ -332,6 +402,12 @@ struct intel_connector {
/* Work struct to schedule a uevent on link train failure */
struct work_struct modeset_retry_work;
const struct intel_hdcp_shim *hdcp_shim;
struct mutex hdcp_mutex;
uint64_t hdcp_value; /* protected by hdcp_mutex */
struct delayed_work hdcp_check_work;
struct work_struct hdcp_prop_work;
};
struct intel_digital_connector_state {
......@@ -1761,6 +1837,15 @@ static inline void intel_backlight_device_unregister(struct intel_connector *con
}
#endif /* CONFIG_BACKLIGHT_CLASS_DEVICE */
/* intel_hdcp.c */
void intel_hdcp_atomic_check(struct drm_connector *connector,
struct drm_connector_state *old_state,
struct drm_connector_state *new_state);
int intel_hdcp_init(struct intel_connector *connector,
const struct intel_hdcp_shim *hdcp_shim);
int intel_hdcp_enable(struct intel_connector *connector);
int intel_hdcp_disable(struct intel_connector *connector);
int intel_hdcp_check_link(struct intel_connector *connector);
/* intel_psr.c */
void intel_psr_enable(struct intel_dp *intel_dp,
......
/* SPDX-License-Identifier: MIT */
/*
* Copyright (C) 2017 Google, Inc.
*
* Authors:
* Sean Paul <seanpaul@chromium.org>
*/
#include <drm/drmP.h>
#include <drm/drm_hdcp.h>
#include <linux/i2c.h>
#include <linux/random.h>
#include "intel_drv.h"
#include "i915_reg.h"
#define KEY_LOAD_TRIES 5
static int intel_hdcp_poll_ksv_fifo(struct intel_digital_port *intel_dig_port,
const struct intel_hdcp_shim *shim)
{
int ret, read_ret;
bool ksv_ready;
/* Poll for ksv list ready (spec says max time allowed is 5s) */
ret = __wait_for(read_ret = shim->read_ksv_ready(intel_dig_port,
&ksv_ready),
read_ret || ksv_ready, 5 * 1000 * 1000, 1000,
100 * 1000);
if (ret)
return ret;
if (read_ret)
return read_ret;
if (!ksv_ready)
return -ETIMEDOUT;
return 0;
}
static void intel_hdcp_clear_keys(struct drm_i915_private *dev_priv)
{
I915_WRITE(HDCP_KEY_CONF, HDCP_CLEAR_KEYS_TRIGGER);
I915_WRITE(HDCP_KEY_STATUS, HDCP_KEY_LOAD_DONE | HDCP_KEY_LOAD_STATUS |
HDCP_FUSE_IN_PROGRESS | HDCP_FUSE_ERROR | HDCP_FUSE_DONE);
}
static int intel_hdcp_load_keys(struct drm_i915_private *dev_priv)
{
int ret;
u32 val;
/* Initiate loading the HDCP key from fuses */
mutex_lock(&dev_priv->pcu_lock);
ret = sandybridge_pcode_write(dev_priv, SKL_PCODE_LOAD_HDCP_KEYS, 1);
mutex_unlock(&dev_priv->pcu_lock);
if (ret) {
DRM_ERROR("Failed to initiate HDCP key load (%d)\n", ret);
return ret;
}
/* Wait for the keys to load (500us) */
ret = __intel_wait_for_register(dev_priv, HDCP_KEY_STATUS,
HDCP_KEY_LOAD_DONE, HDCP_KEY_LOAD_DONE,
10, 1, &val);
if (ret)
return ret;
else if (!(val & HDCP_KEY_LOAD_STATUS))
return -ENXIO;
/* Send Aksv over to PCH display for use in authentication */
I915_WRITE(HDCP_KEY_CONF, HDCP_AKSV_SEND_TRIGGER);
return 0;
}
/* Returns updated SHA-1 index */
static int intel_write_sha_text(struct drm_i915_private *dev_priv, u32 sha_text)
{
I915_WRITE(HDCP_SHA_TEXT, sha_text);
if (intel_wait_for_register(dev_priv, HDCP_REP_CTL,
HDCP_SHA1_READY, HDCP_SHA1_READY, 1)) {
DRM_ERROR("Timed out waiting for SHA1 ready\n");
return -ETIMEDOUT;
}
return 0;
}
static
u32 intel_hdcp_get_repeater_ctl(struct intel_digital_port *intel_dig_port)
{
enum port port = intel_dig_port->base.port;
switch (port) {
case PORT_A:
return HDCP_DDIA_REP_PRESENT | HDCP_DDIA_SHA1_M0;
case PORT_B:
return HDCP_DDIB_REP_PRESENT | HDCP_DDIB_SHA1_M0;
case PORT_C:
return HDCP_DDIC_REP_PRESENT | HDCP_DDIC_SHA1_M0;
case PORT_D:
return HDCP_DDID_REP_PRESENT | HDCP_DDID_SHA1_M0;
case PORT_E:
return HDCP_DDIE_REP_PRESENT | HDCP_DDIE_SHA1_M0;
default:
break;
}
DRM_ERROR("Unknown port %d\n", port);
return -EINVAL;
}
static
bool intel_hdcp_is_ksv_valid(u8 *ksv)
{
int i, ones = 0;
/* KSV has 20 1's and 20 0's */
for (i = 0; i < DRM_HDCP_KSV_LEN; i++)
ones += hweight8(ksv[i]);
if (ones != 20)
return false;
return true;
}
/* Implements Part 2 of the HDCP authorization procedure */
static
int intel_hdcp_auth_downstream(struct intel_digital_port *intel_dig_port,
const struct intel_hdcp_shim *shim)
{
struct drm_i915_private *dev_priv;
u32 vprime, sha_text, sha_leftovers, rep_ctl;
u8 bstatus[2], num_downstream, *ksv_fifo;
int ret, i, j, sha_idx;
dev_priv = intel_dig_port->base.base.dev->dev_private;
ret = shim->read_bstatus(intel_dig_port, bstatus);
if (ret)
return ret;
/* If there are no downstream devices, we're all done. */
num_downstream = DRM_HDCP_NUM_DOWNSTREAM(bstatus[0]);
if (num_downstream == 0) {
DRM_INFO("HDCP is enabled (no downstream devices)\n");
return 0;
}
ret = intel_hdcp_poll_ksv_fifo(intel_dig_port, shim);
if (ret) {
DRM_ERROR("KSV list failed to become ready (%d)\n", ret);
return ret;
}
ksv_fifo = kzalloc(num_downstream * DRM_HDCP_KSV_LEN, GFP_KERNEL);
if (!ksv_fifo)
return -ENOMEM;
ret = shim->read_ksv_fifo(intel_dig_port, num_downstream, ksv_fifo);
if (ret)
return ret;
/* Process V' values from the receiver */
for (i = 0; i < DRM_HDCP_V_PRIME_NUM_PARTS; i++) {
ret = shim->read_v_prime_part(intel_dig_port, i, &vprime);
if (ret)
return ret;
I915_WRITE(HDCP_SHA_V_PRIME(i), vprime);
}
/*
* We need to write the concatenation of all device KSVs, BINFO (DP) ||
* BSTATUS (HDMI), and M0 (which is added via HDCP_REP_CTL). This byte
* stream is written via the HDCP_SHA_TEXT register in 32-bit
* increments. Every 64 bytes, we need to write HDCP_REP_CTL again. This
* index will keep track of our progress through the 64 bytes as well as
* helping us work the 40-bit KSVs through our 32-bit register.
*
* NOTE: data passed via HDCP_SHA_TEXT should be big-endian
*/
sha_idx = 0;
sha_text = 0;
sha_leftovers = 0;
rep_ctl = intel_hdcp_get_repeater_ctl(intel_dig_port);
I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_32);
for (i = 0; i < num_downstream; i++) {
unsigned int sha_empty;
u8 *ksv = &ksv_fifo[i * DRM_HDCP_KSV_LEN];
/* Fill up the empty slots in sha_text and write it out */
sha_empty = sizeof(sha_text) - sha_leftovers;
for (j = 0; j < sha_empty; j++)
sha_text |= ksv[j] << ((sizeof(sha_text) - j - 1) * 8);
ret = intel_write_sha_text(dev_priv, sha_text);
if (ret < 0)
return ret;
/* Programming guide writes this every 64 bytes */
sha_idx += sizeof(sha_text);
if (!(sha_idx % 64))
I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_32);
/* Store the leftover bytes from the ksv in sha_text */
sha_leftovers = DRM_HDCP_KSV_LEN - sha_empty;
sha_text = 0;
for (j = 0; j < sha_leftovers; j++)
sha_text |= ksv[sha_empty + j] <<
((sizeof(sha_text) - j - 1) * 8);
/*
* If we still have room in sha_text for more data, continue.
* Otherwise, write it out immediately.
*/
if (sizeof(sha_text) > sha_leftovers)
continue;
ret = intel_write_sha_text(dev_priv, sha_text);
if (ret < 0)
return ret;
sha_leftovers = 0;
sha_text = 0;
sha_idx += sizeof(sha_text);
}
/*
* We need to write BINFO/BSTATUS, and M0 now. Depending on how many
* bytes are leftover from the last ksv, we might be able to fit them
* all in sha_text (first 2 cases), or we might need to split them up
* into 2 writes (last 2 cases).
*/
if (sha_leftovers == 0) {
/* Write 16 bits of text, 16 bits of M0 */
I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_16);
ret = intel_write_sha_text(dev_priv,
bstatus[0] << 8 | bstatus[1]);
if (ret < 0)
return ret;
sha_idx += sizeof(sha_text);
/* Write 32 bits of M0 */
I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_0);
ret = intel_write_sha_text(dev_priv, 0);
if (ret < 0)
return ret;
sha_idx += sizeof(sha_text);
/* Write 16 bits of M0 */
I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_16);
ret = intel_write_sha_text(dev_priv, 0);
if (ret < 0)
return ret;
sha_idx += sizeof(sha_text);
} else if (sha_leftovers == 1) {
/* Write 24 bits of text, 8 bits of M0 */
I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_24);
sha_text |= bstatus[0] << 16 | bstatus[1] << 8;
/* Only 24-bits of data, must be in the LSB */
sha_text = (sha_text & 0xffffff00) >> 8;
ret = intel_write_sha_text(dev_priv, sha_text);
if (ret < 0)
return ret;
sha_idx += sizeof(sha_text);
/* Write 32 bits of M0 */
I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_0);
ret = intel_write_sha_text(dev_priv, 0);
if (ret < 0)
return ret;
sha_idx += sizeof(sha_text);
/* Write 24 bits of M0 */
I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_8);
ret = intel_write_sha_text(dev_priv, 0);
if (ret < 0)
return ret;
sha_idx += sizeof(sha_text);
} else if (sha_leftovers == 2) {
/* Write 32 bits of text */
I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_32);
sha_text |= bstatus[0] << 24 | bstatus[1] << 16;
ret = intel_write_sha_text(dev_priv, sha_text);
if (ret < 0)
return ret;
sha_idx += sizeof(sha_text);
/* Write 64 bits of M0 */
I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_0);
for (i = 0; i < 2; i++) {
ret = intel_write_sha_text(dev_priv, 0);
if (ret < 0)
return ret;
sha_idx += sizeof(sha_text);
}
} else if (sha_leftovers == 3) {
/* Write 32 bits of text */
I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_32);
sha_text |= bstatus[0] << 24;
ret = intel_write_sha_text(dev_priv, sha_text);
if (ret < 0)
return ret;
sha_idx += sizeof(sha_text);
/* Write 8 bits of text, 24 bits of M0 */
I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_8);
ret = intel_write_sha_text(dev_priv, bstatus[1]);
if (ret < 0)
return ret;
sha_idx += sizeof(sha_text);
/* Write 32 bits of M0 */
I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_0);
ret = intel_write_sha_text(dev_priv, 0);
if (ret < 0)
return ret;
sha_idx += sizeof(sha_text);
/* Write 8 bits of M0 */
I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_24);
ret = intel_write_sha_text(dev_priv, 0);
if (ret < 0)
return ret;
sha_idx += sizeof(sha_text);
} else {
DRM_ERROR("Invalid number of leftovers %d\n", sha_leftovers);
return -EINVAL;
}
I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_32);
/* Fill up to 64-4 bytes with zeros (leave the last write for length) */
while ((sha_idx % 64) < (64 - sizeof(sha_text))) {
ret = intel_write_sha_text(dev_priv, 0);
if (ret < 0)
return ret;
sha_idx += sizeof(sha_text);
}
/*
* Last write gets the length of the concatenation in bits. That is:
* - 5 bytes per device
* - 10 bytes for BINFO/BSTATUS(2), M0(8)
*/
sha_text = (num_downstream * 5 + 10) * 8;
ret = intel_write_sha_text(dev_priv, sha_text);
if (ret < 0)
return ret;
/* Tell the HW we're done with the hash and wait for it to ACK */
I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_COMPLETE_HASH);
if (intel_wait_for_register(dev_priv, HDCP_REP_CTL,
HDCP_SHA1_COMPLETE,
HDCP_SHA1_COMPLETE, 1)) {
DRM_ERROR("Timed out waiting for SHA1 complete\n");
return -ETIMEDOUT;
}
if (!(I915_READ(HDCP_REP_CTL) & HDCP_SHA1_V_MATCH)) {
DRM_ERROR("SHA-1 mismatch, HDCP failed\n");
return -ENXIO;
}
DRM_INFO("HDCP is enabled (%d downstream devices)\n", num_downstream);
return 0;
}
/* Implements Part 1 of the HDCP authorization procedure */
static int intel_hdcp_auth(struct intel_digital_port *intel_dig_port,
const struct intel_hdcp_shim *shim)
{
struct drm_i915_private *dev_priv;
enum port port;
unsigned long r0_prime_gen_start;
int ret, i;
union {
u32 reg[2];
u8 shim[DRM_HDCP_AN_LEN];
} an;
union {
u32 reg[2];
u8 shim[DRM_HDCP_KSV_LEN];
} bksv;
union {
u32 reg;
u8 shim[DRM_HDCP_RI_LEN];
} ri;
bool repeater_present;
dev_priv = intel_dig_port->base.base.dev->dev_private;
port = intel_dig_port->base.port;
/* Initialize An with 2 random values and acquire it */
for (i = 0; i < 2; i++)
I915_WRITE(PORT_HDCP_ANINIT(port), get_random_u32());
I915_WRITE(PORT_HDCP_CONF(port), HDCP_CONF_CAPTURE_AN);
/* Wait for An to be acquired */
if (intel_wait_for_register(dev_priv, PORT_HDCP_STATUS(port),
HDCP_STATUS_AN_READY,
HDCP_STATUS_AN_READY, 1)) {
DRM_ERROR("Timed out waiting for An\n");
return -ETIMEDOUT;
}
an.reg[0] = I915_READ(PORT_HDCP_ANLO(port));
an.reg[1] = I915_READ(PORT_HDCP_ANHI(port));
ret = shim->write_an_aksv(intel_dig_port, an.shim);
if (ret)
return ret;
r0_prime_gen_start = jiffies;
memset(&bksv, 0, sizeof(bksv));
ret = shim->read_bksv(intel_dig_port, bksv.shim);
if (ret)
return ret;
else if (!intel_hdcp_is_ksv_valid(bksv.shim))
return -ENODEV;
I915_WRITE(PORT_HDCP_BKSVLO(port), bksv.reg[0]);
I915_WRITE(PORT_HDCP_BKSVHI(port), bksv.reg[1]);
ret = shim->repeater_present(intel_dig_port, &repeater_present);
if (ret)
return ret;
if (repeater_present)
I915_WRITE(HDCP_REP_CTL,
intel_hdcp_get_repeater_ctl(intel_dig_port));
ret = shim->toggle_signalling(intel_dig_port, true);
if (ret)
return ret;
I915_WRITE(PORT_HDCP_CONF(port), HDCP_CONF_AUTH_AND_ENC);
/* Wait for R0 ready */
if (wait_for(I915_READ(PORT_HDCP_STATUS(port)) &
(HDCP_STATUS_R0_READY | HDCP_STATUS_ENC), 1)) {
DRM_ERROR("Timed out waiting for R0 ready\n");
return -ETIMEDOUT;
}
/*
* Wait for R0' to become available. The spec says 100ms from Aksv, but
* some monitors can take longer than this. We'll set the timeout at
* 300ms just to be sure.
*
* On DP, there's an R0_READY bit available but no such bit
* exists on HDMI. Since the upper-bound is the same, we'll just do
* the stupid thing instead of polling on one and not the other.
*/
wait_remaining_ms_from_jiffies(r0_prime_gen_start, 300);
ri.reg = 0;
ret = shim->read_ri_prime(intel_dig_port, ri.shim);
if (ret)
return ret;
I915_WRITE(PORT_HDCP_RPRIME(port), ri.reg);
/* Wait for Ri prime match */
if (wait_for(I915_READ(PORT_HDCP_STATUS(port)) &
(HDCP_STATUS_RI_MATCH | HDCP_STATUS_ENC), 1)) {
DRM_ERROR("Timed out waiting for Ri prime match (%x)\n",
I915_READ(PORT_HDCP_STATUS(port)));
return -ETIMEDOUT;
}
/* Wait for encryption confirmation */
if (intel_wait_for_register(dev_priv, PORT_HDCP_STATUS(port),
HDCP_STATUS_ENC, HDCP_STATUS_ENC, 20)) {
DRM_ERROR("Timed out waiting for encryption\n");
return -ETIMEDOUT;
}
/*
* XXX: If we have MST-connected devices, we need to enable encryption
* on those as well.
*/
return intel_hdcp_auth_downstream(intel_dig_port, shim);
}
static
struct intel_digital_port *conn_to_dig_port(struct intel_connector *connector)
{
return enc_to_dig_port(&intel_attached_encoder(&connector->base)->base);
}
static int _intel_hdcp_disable(struct intel_connector *connector)
{
struct drm_i915_private *dev_priv = connector->base.dev->dev_private;
struct intel_digital_port *intel_dig_port = conn_to_dig_port(connector);
enum port port = intel_dig_port->base.port;
int ret;
I915_WRITE(PORT_HDCP_CONF(port), 0);
if (intel_wait_for_register(dev_priv, PORT_HDCP_STATUS(port), ~0, 0,
20)) {
DRM_ERROR("Failed to disable HDCP, timeout clearing status\n");
return -ETIMEDOUT;
}
intel_hdcp_clear_keys(dev_priv);
ret = connector->hdcp_shim->toggle_signalling(intel_dig_port, false);
if (ret) {
DRM_ERROR("Failed to disable HDCP signalling\n");
return ret;
}
DRM_INFO("HDCP is disabled\n");
return 0;
}
static int _intel_hdcp_enable(struct intel_connector *connector)
{
struct drm_i915_private *dev_priv = connector->base.dev->dev_private;
int i, ret;
if (!(I915_READ(SKL_FUSE_STATUS) & SKL_FUSE_PG_DIST_STATUS(1))) {
DRM_ERROR("PG1 is disabled, cannot load keys\n");
return -ENXIO;
}
for (i = 0; i < KEY_LOAD_TRIES; i++) {
ret = intel_hdcp_load_keys(dev_priv);
if (!ret)
break;
intel_hdcp_clear_keys(dev_priv);
}
if (ret) {
DRM_ERROR("Could not load HDCP keys, (%d)\n", ret);
return ret;
}
ret = intel_hdcp_auth(conn_to_dig_port(connector),
connector->hdcp_shim);
if (ret) {
DRM_ERROR("Failed to authenticate HDCP (%d)\n", ret);
return ret;
}
return 0;
}
static void intel_hdcp_check_work(struct work_struct *work)
{
struct intel_connector *connector = container_of(to_delayed_work(work),
struct intel_connector,
hdcp_check_work);
if (!intel_hdcp_check_link(connector))
schedule_delayed_work(&connector->hdcp_check_work,
DRM_HDCP_CHECK_PERIOD_MS);
}
static void intel_hdcp_prop_work(struct work_struct *work)
{
struct intel_connector *connector = container_of(work,
struct intel_connector,
hdcp_prop_work);
struct drm_device *dev = connector->base.dev;
struct drm_connector_state *state;
drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
mutex_lock(&connector->hdcp_mutex);
/*
* This worker is only used to flip between ENABLED/DESIRED. Either of
* those to UNDESIRED is handled by core. If hdcp_value == UNDESIRED,
* we're running just after hdcp has been disabled, so just exit
*/
if (connector->hdcp_value != DRM_MODE_CONTENT_PROTECTION_UNDESIRED) {
state = connector->base.state;
state->content_protection = connector->hdcp_value;
}
mutex_unlock(&connector->hdcp_mutex);
drm_modeset_unlock(&dev->mode_config.connection_mutex);
}
int intel_hdcp_init(struct intel_connector *connector,
const struct intel_hdcp_shim *hdcp_shim)
{
int ret;
ret = drm_connector_attach_content_protection_property(
&connector->base);
if (ret)
return ret;
connector->hdcp_shim = hdcp_shim;
mutex_init(&connector->hdcp_mutex);
INIT_DELAYED_WORK(&connector->hdcp_check_work, intel_hdcp_check_work);
INIT_WORK(&connector->hdcp_prop_work, intel_hdcp_prop_work);
return 0;
}
int intel_hdcp_enable(struct intel_connector *connector)
{
int ret;
if (!connector->hdcp_shim)
return -ENOENT;
mutex_lock(&connector->hdcp_mutex);
ret = _intel_hdcp_enable(connector);
if (ret)
goto out;
connector->hdcp_value = DRM_MODE_CONTENT_PROTECTION_ENABLED;
schedule_work(&connector->hdcp_prop_work);
schedule_delayed_work(&connector->hdcp_check_work,
DRM_HDCP_CHECK_PERIOD_MS);
out:
mutex_unlock(&connector->hdcp_mutex);
return ret;
}
int intel_hdcp_disable(struct intel_connector *connector)
{
int ret;
if (!connector->hdcp_shim)
return -ENOENT;
mutex_lock(&connector->hdcp_mutex);
connector->hdcp_value = DRM_MODE_CONTENT_PROTECTION_UNDESIRED;
ret = _intel_hdcp_disable(connector);
mutex_unlock(&connector->hdcp_mutex);
cancel_delayed_work_sync(&connector->hdcp_check_work);
return ret;
}
void intel_hdcp_atomic_check(struct drm_connector *connector,
struct drm_connector_state *old_state,
struct drm_connector_state *new_state)
{
uint64_t old_cp = old_state->content_protection;
uint64_t new_cp = new_state->content_protection;
struct drm_crtc_state *crtc_state;
if (!new_state->crtc) {
/*
* If the connector is being disabled with CP enabled, mark it
* desired so it's re-enabled when the connector is brought back
*/
if (old_cp == DRM_MODE_CONTENT_PROTECTION_ENABLED)
new_state->content_protection =
DRM_MODE_CONTENT_PROTECTION_DESIRED;
return;
}
/*
* Nothing to do if the state didn't change, or HDCP was activated since
* the last commit
*/
if (old_cp == new_cp ||
(old_cp == DRM_MODE_CONTENT_PROTECTION_DESIRED &&
new_cp == DRM_MODE_CONTENT_PROTECTION_ENABLED))
return;
crtc_state = drm_atomic_get_new_crtc_state(new_state->state,
new_state->crtc);
crtc_state->mode_changed = true;
}
/* Implements Part 3 of the HDCP authorization procedure */
int intel_hdcp_check_link(struct intel_connector *connector)
{
struct drm_i915_private *dev_priv = connector->base.dev->dev_private;
struct intel_digital_port *intel_dig_port = conn_to_dig_port(connector);
enum port port = intel_dig_port->base.port;
int ret = 0;
if (!connector->hdcp_shim)
return -ENOENT;
mutex_lock(&connector->hdcp_mutex);
if (connector->hdcp_value == DRM_MODE_CONTENT_PROTECTION_UNDESIRED)
goto out;
if (!(I915_READ(PORT_HDCP_STATUS(port)) & HDCP_STATUS_ENC)) {
DRM_ERROR("HDCP check failed: link is not encrypted, %x\n",
I915_READ(PORT_HDCP_STATUS(port)));
ret = -ENXIO;
connector->hdcp_value = DRM_MODE_CONTENT_PROTECTION_DESIRED;
schedule_work(&connector->hdcp_prop_work);
goto out;
}
if (connector->hdcp_shim->check_link(intel_dig_port)) {
if (connector->hdcp_value !=
DRM_MODE_CONTENT_PROTECTION_UNDESIRED) {
connector->hdcp_value =
DRM_MODE_CONTENT_PROTECTION_ENABLED;
schedule_work(&connector->hdcp_prop_work);
}
goto out;
}
DRM_INFO("HDCP link failed, retrying authentication\n");
ret = _intel_hdcp_disable(connector);
if (ret) {
DRM_ERROR("Failed to disable hdcp (%d)\n", ret);
connector->hdcp_value = DRM_MODE_CONTENT_PROTECTION_DESIRED;
schedule_work(&connector->hdcp_prop_work);
goto out;
}
ret = _intel_hdcp_enable(connector);
if (ret) {
DRM_ERROR("Failed to enable hdcp (%d)\n", ret);
connector->hdcp_value = DRM_MODE_CONTENT_PROTECTION_DESIRED;
schedule_work(&connector->hdcp_prop_work);
goto out;
}
out:
mutex_unlock(&connector->hdcp_mutex);
return ret;
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment