Skip to content

L
linux
Commit ee86da9d authored by Jeff Garzik's avatar Jeff Garzik
Browse files
Options

Merge redhat.com:/spare/repo/netdev-2.6/misc 

into redhat.com:/spare/repo/net-drivers-2.6
parents a0e8d714 8a6d6a46
Hide whitespace changes
Inline Side-by-side
Showing with 6965 additions and 2315 deletions
drivers/net/8139too.c
View file @ ee86da9d
...@@ -171,7 +171,11 @@ static int debug = -1; ...@@ -171,7 +171,11 @@ static int debug = -1;
* Receive ring size * Receive ring size
* Warning: 64K ring has hardware issues and may lock up. * Warning: 64K ring has hardware issues and may lock up.
*/ */
#if defined(CONFIG_SH_DREAMCAST) || defined(CONFIG_EMBEDDED)
#define RX_BUF_IDX 1 /* 16K ring */
#else
#define RX_BUF_IDX 2 /* 32K ring */ #define RX_BUF_IDX 2 /* 32K ring */
#endif
#define RX_BUF_LEN (8192 << RX_BUF_IDX) #define RX_BUF_LEN (8192 << RX_BUF_IDX)
#define RX_BUF_PAD 16 #define RX_BUF_PAD 16
#define RX_BUF_WRAP_PAD 2048 /* spare padding to handle lack of packet wrap */ #define RX_BUF_WRAP_PAD 2048 /* spare padding to handle lack of packet wrap */
......
drivers/net/Kconfig
View file @ ee86da9d
...@@ -1210,6 +1210,39 @@ config IBMVETH ...@@ -1210,6 +1210,39 @@ config IBMVETH
<file:Documentation/networking/net-modules.txt>. The module will <file:Documentation/networking/net-modules.txt>. The module will
be called ibmveth. be called ibmveth.
config IBM_EMAC
tristate "IBM PPC4xx EMAC driver support"
depends on 4xx
---help---
This driver supports the IBM PPC4xx EMAC family of on-chip
Ethernet controllers.
config IBM_EMAC_ERRMSG
bool "Verbose error messages"
depends on IBM_EMAC
config IBM_EMAC_RXB
int "Number of receive buffers"
depends on IBM_EMAC
default "128" if IBM_EMAC4
default "64"
config IBM_EMAC_TXB
int "Number of transmit buffers"
depends on IBM_EMAC
default "128" if IBM_EMAC4
default "8"
config IBM_EMAC_FGAP
int "Frame gap"
depends on IBM_EMAC
default "8"
config IBM_EMAC_SKBRES
int "Skb reserve amount"
depends on IBM_EMAC
default "0"
config NET_PCI config NET_PCI
bool "EISA, VLB, PCI and on board controllers" bool "EISA, VLB, PCI and on board controllers"
depends on NET_ETHERNET && (ISA || EISA || PCI) depends on NET_ETHERNET && (ISA || EISA || PCI)
......
drivers/net/Makefile
View file @ ee86da9d
...@@ -7,6 +7,7 @@ ifeq ($(CONFIG_ISDN_PPP),y) ...@@ -7,6 +7,7 @@ ifeq ($(CONFIG_ISDN_PPP),y)
endif endif
obj-$(CONFIG_E1000) += e1000/ obj-$(CONFIG_E1000) += e1000/
obj-$(CONFIG_IBM_EMAC) += ibm_emac/
obj-$(CONFIG_IXGB) += ixgb/ obj-$(CONFIG_IXGB) += ixgb/
obj-$(CONFIG_BONDING) += bonding/ obj-$(CONFIG_BONDING) += bonding/
......
drivers/net/acenic.c
View file @ ee86da9d
...@@ -131,7 +131,6 @@ ...@@ -131,7 +131,6 @@
#define PCI_DEVICE_ID_SGI_ACENIC 0x0009 #define PCI_DEVICE_ID_SGI_ACENIC 0x0009
#endif #endif
#if LINUX_VERSION_CODE >= 0x20400
static struct pci_device_id acenic_pci_tbl[] = { static struct pci_device_id acenic_pci_tbl[] = {
{ PCI_VENDOR_ID_ALTEON, PCI_DEVICE_ID_ALTEON_ACENIC_FIBRE, { PCI_VENDOR_ID_ALTEON, PCI_DEVICE_ID_ALTEON_ACENIC_FIBRE,
PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_NETWORK_ETHERNET << 8, 0xffff00, }, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_NETWORK_ETHERNET << 8, 0xffff00, },
...@@ -156,37 +155,6 @@ static struct pci_device_id acenic_pci_tbl[] = { ...@@ -156,37 +155,6 @@ static struct pci_device_id acenic_pci_tbl[] = {
{ } { }
}; };
MODULE_DEVICE_TABLE(pci, acenic_pci_tbl); MODULE_DEVICE_TABLE(pci, acenic_pci_tbl);
#endif
#ifndef MODULE_LICENSE
#define MODULE_LICENSE(a)
#endif
#ifndef wmb
#define wmb() mb()
#endif
#ifndef __exit
#define __exit
#endif
#ifndef __devinit
#define __devinit __init
#endif
#ifndef SMP_CACHE_BYTES
#define SMP_CACHE_BYTES L1_CACHE_BYTES
#endif
#ifndef SET_MODULE_OWNER
#define SET_MODULE_OWNER(dev) do{} while(0)
#define ACE_MOD_INC_USE_COUNT MOD_INC_USE_COUNT
#define ACE_MOD_DEC_USE_COUNT MOD_DEC_USE_COUNT
#else
#define ACE_MOD_INC_USE_COUNT do{} while(0)
#define ACE_MOD_DEC_USE_COUNT do{} while(0)
#endif
#ifndef SET_NETDEV_DEV #ifndef SET_NETDEV_DEV
#define SET_NETDEV_DEV(net, pdev) do{} while(0) #define SET_NETDEV_DEV(net, pdev) do{} while(0)
...@@ -198,151 +166,8 @@ MODULE_DEVICE_TABLE(pci, acenic_pci_tbl); ...@@ -198,151 +166,8 @@ MODULE_DEVICE_TABLE(pci, acenic_pci_tbl);
#define ace_sync_irq(irq) synchronize_irq() #define ace_sync_irq(irq) synchronize_irq()
#endif #endif
#if LINUX_VERSION_CODE < 0x2051e #ifndef offset_in_page
#define local_irq_save(flags) do{__save_flags(flags) ; \ #define offset_in_page(ptr) ((unsigned long)(ptr) & ~PAGE_MASK)
__cli();} while(0)
#define local_irq_restore(flags) __restore_flags(flags)
#endif
#if (LINUX_VERSION_CODE < 0x02030d)
#define pci_resource_start(dev, bar) dev->base_address[bar]
#elif (LINUX_VERSION_CODE < 0x02032c)
#define pci_resource_start(dev, bar) dev->resource[bar].start
#endif
#if (LINUX_VERSION_CODE < 0x02030e)
#define net_device device
#endif
#if (LINUX_VERSION_CODE < 0x02032a)
typedef u32 dma_addr_t;
static inline void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size,
dma_addr_t *dma_handle)
{
void *virt_ptr;
virt_ptr = kmalloc(size, GFP_KERNEL);
if (!virt_ptr)
return NULL;
*dma_handle = virt_to_bus(virt_ptr);
return virt_ptr;
}
#define pci_free_consistent(cookie, size, ptr, dma_ptr) kfree(ptr)
#define pci_map_page(cookie, page, off, size, dir) \
virt_to_bus(page_address(page)+(off))
#define pci_unmap_page(cookie, address, size, dir)
#define pci_set_dma_mask(dev, mask) \
(((u64)(mask) & 0xffffffff00000000) == 0 ? 0 : -EIO)
#define pci_dma_supported(dev, mask) \
(((u64)(mask) & 0xffffffff00000000) == 0 ? 1 : 0)
#elif (LINUX_VERSION_CODE < 0x02040d)
/*
* 2.4.13 introduced pci_map_page()/pci_unmap_page() - for 2.4.12 and prior,
* fall back on pci_map_single()/pci_unnmap_single().
*
* We are guaranteed that the page is mapped at this point since
* pci_map_page() is only used upon valid struct skb's.
*/
static inline dma_addr_t
pci_map_page(struct pci_dev *cookie, struct page *page, unsigned long off,
size_t size, int dir)
{
void *page_virt;
page_virt = page_address(page);
if (!page_virt)
BUG();
return pci_map_single(cookie, (page_virt + off), size, dir);
}
#define pci_unmap_page(cookie, dma_addr, size, dir) \
pci_unmap_single(cookie, dma_addr, size, dir)
#endif
#if (LINUX_VERSION_CODE < 0x020412)
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
#define pci_unmap_addr(PTR, ADDR_NAME) 0
#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do{} while(0)
#define pci_unmap_len(PTR, LEN_NAME) 0
#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do{} while(0)
#endif
#if (LINUX_VERSION_CODE < 0x02032b)
/*
* SoftNet
*
* For pre-softnet kernels we need to tell the upper layer not to
* re-enter start_xmit() while we are in there. However softnet
* guarantees not to enter while we are in there so there is no need
* to do the netif_stop_queue() dance unless the transmit queue really
* gets stuck. This should also improve performance according to tests
* done by Aman Singla.
*/
#define dev_kfree_skb_irq(a) dev_kfree_skb(a)
#define netif_wake_queue(dev) clear_bit(0, &dev->tbusy)
#define netif_stop_queue(dev) set_bit(0, &dev->tbusy)
#define late_stop_netif_stop_queue(dev) do{} while(0)
#define early_stop_netif_stop_queue(dev) test_and_set_bit(0,&dev->tbusy)
#define early_stop_netif_wake_queue(dev) netif_wake_queue(dev)
static inline void netif_start_queue(struct net_device *dev)
{
dev->tbusy = 0;
dev->interrupt = 0;
dev->start = 1;
}
#define ace_mark_net_bh() mark_bh(NET_BH)
#define netif_queue_stopped(dev) dev->tbusy
#define netif_running(dev) dev->start
#define ace_if_down(dev) do{dev->start = 0;} while(0)
#define tasklet_struct tq_struct
static inline void tasklet_schedule(struct tasklet_struct *tasklet)
{
queue_task(tasklet, &tq_immediate);
mark_bh(IMMEDIATE_BH);
}
static inline void tasklet_init(struct tasklet_struct *tasklet,
void (*func)(unsigned long),
unsigned long data)
{
tasklet->next = NULL;
tasklet->sync = 0;
tasklet->routine = (void (*)(void *))func;
tasklet->data = (void *)data;
}
#define tasklet_kill(tasklet) do{} while(0)
#else
#define late_stop_netif_stop_queue(dev) netif_stop_queue(dev)
#define early_stop_netif_stop_queue(dev) 0
#define early_stop_netif_wake_queue(dev) do{} while(0)
#define ace_mark_net_bh() do{} while(0)
#define ace_if_down(dev) do{} while(0)
#endif
#if (LINUX_VERSION_CODE >= 0x02031b)
#define NEW_NETINIT
#define ACE_PROBE_ARG void
#else
#define ACE_PROBE_ARG struct net_device *dev
#endif
#ifndef min_t
#define min_t(type,a,b) (((a)<(b))?(a):(b))
#endif
#ifndef ARCH_HAS_PREFETCHW
#ifndef prefetchw
#define prefetchw(x) do{} while(0)
#endif
#endif #endif
#define ACE_MAX_MOD_PARMS 8 #define ACE_MAX_MOD_PARMS 8
...@@ -595,407 +420,323 @@ static int max_rx_desc[ACE_MAX_MOD_PARMS]; ...@@ -595,407 +420,323 @@ static int max_rx_desc[ACE_MAX_MOD_PARMS];
static int tx_ratio[ACE_MAX_MOD_PARMS]; static int tx_ratio[ACE_MAX_MOD_PARMS];
static int dis_pci_mem_inval[ACE_MAX_MOD_PARMS] = {1, 1, 1, 1, 1, 1, 1, 1}; static int dis_pci_mem_inval[ACE_MAX_MOD_PARMS] = {1, 1, 1, 1, 1, 1, 1, 1};
MODULE_AUTHOR("Jes Sorensen <jes@trained-monkey.org>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("AceNIC/3C985/GA620 Gigabit Ethernet driver");
MODULE_PARM(link, "1-" __MODULE_STRING(8) "i");
MODULE_PARM(trace, "1-" __MODULE_STRING(8) "i");
MODULE_PARM(tx_coal_tick, "1-" __MODULE_STRING(8) "i");
MODULE_PARM(max_tx_desc, "1-" __MODULE_STRING(8) "i");
MODULE_PARM(rx_coal_tick, "1-" __MODULE_STRING(8) "i");
MODULE_PARM(max_rx_desc, "1-" __MODULE_STRING(8) "i");
MODULE_PARM(tx_ratio, "1-" __MODULE_STRING(8) "i");
MODULE_PARM_DESC(link, "AceNIC/3C985/NetGear link state");
MODULE_PARM_DESC(trace, "AceNIC/3C985/NetGear firmware trace level");
MODULE_PARM_DESC(tx_coal_tick, "AceNIC/3C985/GA620 max clock ticks to wait from first tx descriptor arrives");
MODULE_PARM_DESC(max_tx_desc, "AceNIC/3C985/GA620 max number of transmit descriptors to wait");
MODULE_PARM_DESC(rx_coal_tick, "AceNIC/3C985/GA620 max clock ticks to wait from first rx descriptor arrives");
MODULE_PARM_DESC(max_rx_desc, "AceNIC/3C985/GA620 max number of receive descriptors to wait");
MODULE_PARM_DESC(tx_ratio, "AceNIC/3C985/GA620 ratio of NIC memory used for TX/RX descriptors (range 0-63)");
static char version[] __initdata = static char version[] __initdata =
"acenic.c: v0.92 08/05/2002 Jes Sorensen, linux-acenic@SunSITE.dk\n" "acenic.c: v0.92 08/05/2002 Jes Sorensen, linux-acenic@SunSITE.dk\n"
" http://home.cern.ch/~jes/gige/acenic.html\n"; " http://home.cern.ch/~jes/gige/acenic.html\n";
static struct net_device *root_dev; static int __devinit acenic_probe_one(struct pci_dev *pdev,
const struct pci_device_id *id)
static int probed __initdata = 0;
int __devinit acenic_probe (ACE_PROBE_ARG)
{ {
#ifdef NEW_NETINIT
struct net_device *dev; struct net_device *dev;
#endif
struct ace_private *ap; struct ace_private *ap;
struct pci_dev *pdev = NULL; static int boards_found;
int boards_found = 0;
int version_disp;
if (probed)
return -ENODEV;
probed++;
version_disp = 0;
while ((pdev = pci_find_class(PCI_CLASS_NETWORK_ETHERNET<<8, pdev))) {
if (!((pdev->vendor == PCI_VENDOR_ID_ALTEON) &&
((pdev->device == PCI_DEVICE_ID_ALTEON_ACENIC_FIBRE) ||
(pdev->device == PCI_DEVICE_ID_ALTEON_ACENIC_COPPER)))&&
!((pdev->vendor == PCI_VENDOR_ID_3COM) &&
(pdev->device == PCI_DEVICE_ID_3COM_3C985)) &&
!((pdev->vendor == PCI_VENDOR_ID_NETGEAR) &&
((pdev->device == PCI_DEVICE_ID_NETGEAR_GA620) ||
(pdev->device == PCI_DEVICE_ID_NETGEAR_GA620T))) &&
/*
* Farallon used the DEC vendor ID on their cards by
* mistake for a while
*/
!((pdev->vendor == PCI_VENDOR_ID_DEC) &&
(pdev->device == PCI_DEVICE_ID_FARALLON_PN9000SX)) &&
!((pdev->vendor == PCI_VENDOR_ID_ALTEON) &&
(pdev->device == PCI_DEVICE_ID_FARALLON_PN9100T)) &&
!((pdev->vendor == PCI_VENDOR_ID_SGI) &&
(pdev->device == PCI_DEVICE_ID_SGI_ACENIC)))
continue;
dev = alloc_etherdev(sizeof(struct ace_private));
if (dev == NULL) {
printk(KERN_ERR "acenic: Unable to allocate "
"net_device structure!\n");
break;
}
SET_MODULE_OWNER(dev); dev = alloc_etherdev(sizeof(struct ace_private));
SET_NETDEV_DEV(dev, &pdev->dev); if (dev == NULL) {
printk(KERN_ERR "acenic: Unable to allocate "
"net_device structure!\n");
return -ENOMEM;
}
ap = dev->priv; SET_MODULE_OWNER(dev);
ap->pdev = pdev; SET_NETDEV_DEV(dev, &pdev->dev);
dev->open = &ace_open; ap = dev->priv;
dev->hard_start_xmit = &ace_start_xmit; ap->pdev = pdev;
dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
#if ACENIC_DO_VLAN #if ACENIC_DO_VLAN
dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
dev->vlan_rx_register = ace_vlan_rx_register; dev->vlan_rx_register = ace_vlan_rx_register;
dev->vlan_rx_kill_vid = ace_vlan_rx_kill_vid; dev->vlan_rx_kill_vid = ace_vlan_rx_kill_vid;
#endif #endif
if (1) { if (1) {
static void ace_watchdog(struct net_device *dev); static void ace_watchdog(struct net_device *dev);
dev->tx_timeout = &ace_watchdog; dev->tx_timeout = &ace_watchdog;
dev->watchdog_timeo = 5*HZ; dev->watchdog_timeo = 5*HZ;
} }
dev->stop = &ace_close;
dev->get_stats = &ace_get_stats;
dev->set_multicast_list = &ace_set_multicast_list;
dev->do_ioctl = &ace_ioctl;
dev->set_mac_address = &ace_set_mac_addr;
dev->change_mtu = &ace_change_mtu;
/* display version info if adapter is found */
if (!version_disp)
{
/* set display flag to TRUE so that */
/* we only display this string ONCE */
version_disp = 1;
printk(version);
}
if (pci_enable_device(pdev)) { dev->open = &ace_open;
free_netdev(dev); dev->stop = &ace_close;
continue; dev->hard_start_xmit = &ace_start_xmit;
} dev->get_stats = &ace_get_stats;
dev->set_multicast_list = &ace_set_multicast_list;
dev->do_ioctl = &ace_ioctl;
dev->set_mac_address = &ace_set_mac_addr;
dev->change_mtu = &ace_change_mtu;
/* /* we only display this string ONCE */
* Enable master mode before we start playing with the if (!boards_found)
* pci_command word since pci_set_master() will modify printk(version);
* it.
*/
pci_set_master(pdev);
pci_read_config_word(pdev, PCI_COMMAND, &ap->pci_command); if (pci_enable_device(pdev))
goto fail_free_netdev;
/* OpenFirmware on Mac's does not set this - DOH.. */ /*
if (!(ap->pci_command & PCI_COMMAND_MEMORY)) { * Enable master mode before we start playing with the
printk(KERN_INFO "%s: Enabling PCI Memory Mapped " * pci_command word since pci_set_master() will modify
"access - was not enabled by BIOS/Firmware\n", * it.
dev->name); */
ap->pci_command = ap->pci_command | PCI_COMMAND_MEMORY; pci_set_master(pdev);
pci_write_config_word(ap->pdev, PCI_COMMAND,
ap->pci_command);
wmb();
}
pci_read_config_byte(pdev, PCI_LATENCY_TIMER, pci_read_config_word(pdev, PCI_COMMAND, &ap->pci_command);
&ap->pci_latency);
if (ap->pci_latency <= 0x40) {
ap->pci_latency = 0x40;
pci_write_config_byte(pdev, PCI_LATENCY_TIMER,
ap->pci_latency);
}
/* /* OpenFirmware on Mac's does not set this - DOH.. */
* Remap the regs into kernel space - this is abuse of if (!(ap->pci_command & PCI_COMMAND_MEMORY)) {
* dev->base_addr since it was means for I/O port printk(KERN_INFO "%s: Enabling PCI Memory Mapped "
* addresses but who gives a damn. "access - was not enabled by BIOS/Firmware\n",
*/ dev->name);
dev->base_addr = pci_resource_start(pdev, 0); ap->pci_command = ap->pci_command | PCI_COMMAND_MEMORY;
ap->regs = (struct ace_regs *)ioremap(dev->base_addr, 0x4000); pci_write_config_word(ap->pdev, PCI_COMMAND,
if (!ap->regs) { ap->pci_command);
printk(KERN_ERR "%s: Unable to map I/O register, " wmb();
"AceNIC %i will be disabled.\n", }
dev->name, boards_found);
break;
}
switch(pdev->vendor) { pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &ap->pci_latency);
case PCI_VENDOR_ID_ALTEON: if (ap->pci_latency <= 0x40) {
if (pdev->device == PCI_DEVICE_ID_FARALLON_PN9100T) { ap->pci_latency = 0x40;
strncpy(ap->name, "Farallon PN9100-T " pci_write_config_byte(pdev, PCI_LATENCY_TIMER, ap->pci_latency);
"Gigabit Ethernet", sizeof (ap->name)); }
printk(KERN_INFO "%s: Farallon PN9100-T ",
dev->name); /*
} else { * Remap the regs into kernel space - this is abuse of
strncpy(ap->name, "AceNIC Gigabit Ethernet", * dev->base_addr since it was means for I/O port
sizeof (ap->name)); * addresses but who gives a damn.
printk(KERN_INFO "%s: Alteon AceNIC ", */
dev->name); dev->base_addr = pci_resource_start(pdev, 0);
} ap->regs = (struct ace_regs *)ioremap(dev->base_addr, 0x4000);
break; if (!ap->regs) {
case PCI_VENDOR_ID_3COM: printk(KERN_ERR "%s: Unable to map I/O register, "
strncpy(ap->name, "3Com 3C985 Gigabit Ethernet", "AceNIC %i will be disabled.\n",
sizeof (ap->name)); dev->name, boards_found);
printk(KERN_INFO "%s: 3Com 3C985 ", dev->name); goto fail_free_netdev;
break; }
case PCI_VENDOR_ID_NETGEAR:
strncpy(ap->name, "NetGear GA620 Gigabit Ethernet", switch(pdev->vendor) {
sizeof (ap->name)); case PCI_VENDOR_ID_ALTEON:
printk(KERN_INFO "%s: NetGear GA620 ", dev->name); if (pdev->device == PCI_DEVICE_ID_FARALLON_PN9100T) {
break; strncpy(ap->name, "Farallon PN9100-T "
case PCI_VENDOR_ID_DEC: "Gigabit Ethernet", sizeof (ap->name));
if (pdev->device == PCI_DEVICE_ID_FARALLON_PN9000SX) { printk(KERN_INFO "%s: Farallon PN9100-T ",
strncpy(ap->name, "Farallon PN9000-SX " dev->name);
"Gigabit Ethernet", sizeof (ap->name)); } else {
printk(KERN_INFO "%s: Farallon PN9000-SX ", strncpy(ap->name, "AceNIC Gigabit Ethernet",
dev->name);
break;
}
case PCI_VENDOR_ID_SGI:
strncpy(ap->name, "SGI AceNIC Gigabit Ethernet",
sizeof (ap->name)); sizeof (ap->name));
printk(KERN_INFO "%s: SGI AceNIC ", dev->name); printk(KERN_INFO "%s: Alteon AceNIC ",
break; dev->name);
default: }
strncpy(ap->name, "Unknown AceNIC based Gigabit " break;
"Ethernet", sizeof (ap->name)); case PCI_VENDOR_ID_3COM:
printk(KERN_INFO "%s: Unknown AceNIC ", dev->name); strncpy(ap->name, "3Com 3C985 Gigabit Ethernet",
sizeof (ap->name));
printk(KERN_INFO "%s: 3Com 3C985 ", dev->name);
break;
case PCI_VENDOR_ID_NETGEAR:
strncpy(ap->name, "NetGear GA620 Gigabit Ethernet",
sizeof (ap->name));
printk(KERN_INFO "%s: NetGear GA620 ", dev->name);
break;
case PCI_VENDOR_ID_DEC:
if (pdev->device == PCI_DEVICE_ID_FARALLON_PN9000SX) {
strncpy(ap->name, "Farallon PN9000-SX "
"Gigabit Ethernet", sizeof (ap->name));
printk(KERN_INFO "%s: Farallon PN9000-SX ",
dev->name);
break; break;
} }
ap->name [sizeof (ap->name) - 1] = '\0'; case PCI_VENDOR_ID_SGI:
printk("Gigabit Ethernet at 0x%08lx, ", dev->base_addr); strncpy(ap->name, "SGI AceNIC Gigabit Ethernet",
sizeof (ap->name));
printk(KERN_INFO "%s: SGI AceNIC ", dev->name);
break;
default:
strncpy(ap->name, "Unknown AceNIC based Gigabit "
"Ethernet", sizeof (ap->name));
printk(KERN_INFO "%s: Unknown AceNIC ", dev->name);
break;
}
ap->name [sizeof (ap->name) - 1] = '\0';
printk("Gigabit Ethernet at 0x%08lx, ", dev->base_addr);
#ifdef __sparc__ #ifdef __sparc__
printk("irq %s\n", __irq_itoa(pdev->irq)); printk("irq %s\n", __irq_itoa(pdev->irq));
#else #else
printk("irq %i\n", pdev->irq); printk("irq %i\n", pdev->irq);
#endif #endif
#ifdef CONFIG_ACENIC_OMIT_TIGON_I #ifdef CONFIG_ACENIC_OMIT_TIGON_I
if ((readl(&ap->regs->HostCtrl) >> 28) == 4) { if ((readl(&ap->regs->HostCtrl) >> 28) == 4) {
printk(KERN_ERR "%s: Driver compiled without Tigon I" printk(KERN_ERR "%s: Driver compiled without Tigon I"
" support - NIC disabled\n", dev->name); " support - NIC disabled\n", dev->name);
ace_init_cleanup(dev); goto fail_uninit;
free_netdev(dev); }
continue;
}
#endif #endif
if (ace_allocate_descriptors(dev)) { if (ace_allocate_descriptors(dev))
/* goto fail_free_netdev;
* ace_allocate_descriptors() calls
* ace_init_cleanup() on error.
*/
free_netdev(dev);
continue;
}
#ifdef MODULE #ifdef MODULE
if (boards_found >= ACE_MAX_MOD_PARMS) if (boards_found >= ACE_MAX_MOD_PARMS)
ap->board_idx = BOARD_IDX_OVERFLOW; ap->board_idx = BOARD_IDX_OVERFLOW;
else else
ap->board_idx = boards_found; ap->board_idx = boards_found;
#else #else
ap->board_idx = BOARD_IDX_STATIC; ap->board_idx = BOARD_IDX_STATIC;
#endif #endif
if (ace_init(dev)) { if (ace_init(dev))
/* goto fail_free_netdev;
* ace_init() calls ace_init_cleanup() on error.
*/
free_netdev(dev);
continue;
}
if (register_netdev(dev)) {
printk(KERN_ERR "acenic: device registration failed\n");
ace_init_cleanup(dev);
free_netdev(dev);
continue;
}
if (ap->pci_using_dac)
dev->features |= NETIF_F_HIGHDMA;
boards_found++; if (register_netdev(dev)) {
printk(KERN_ERR "acenic: device registration failed\n");
goto fail_uninit;
} }
/* if (ap->pci_using_dac)
* If we're at this point we're going through ace_probe() for dev->features |= NETIF_F_HIGHDMA;
* the first time. Return success (0) if we've initialized 1
* or more boards. Otherwise, return failure (-ENODEV).
*/
if (boards_found > 0)
return 0;
else
return -ENODEV;
}
pci_set_drvdata(pdev, dev);
#ifdef MODULE boards_found++;
MODULE_AUTHOR("Jes Sorensen <jes@trained-monkey.org>"); return 0;
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("AceNIC/3C985/GA620 Gigabit Ethernet driver");
MODULE_PARM(link, "1-" __MODULE_STRING(8) "i");
MODULE_PARM(trace, "1-" __MODULE_STRING(8) "i");
MODULE_PARM(tx_coal_tick, "1-" __MODULE_STRING(8) "i");
MODULE_PARM(max_tx_desc, "1-" __MODULE_STRING(8) "i");
MODULE_PARM(rx_coal_tick, "1-" __MODULE_STRING(8) "i");
MODULE_PARM(max_rx_desc, "1-" __MODULE_STRING(8) "i");
MODULE_PARM(tx_ratio, "1-" __MODULE_STRING(8) "i");
MODULE_PARM_DESC(link, "AceNIC/3C985/NetGear link state");
MODULE_PARM_DESC(trace, "AceNIC/3C985/NetGear firmware trace level");
MODULE_PARM_DESC(tx_coal_tick, "AceNIC/3C985/GA620 max clock ticks to wait from first tx descriptor arrives");
MODULE_PARM_DESC(max_tx_desc, "AceNIC/3C985/GA620 max number of transmit descriptors to wait");
MODULE_PARM_DESC(rx_coal_tick, "AceNIC/3C985/GA620 max clock ticks to wait from first rx descriptor arrives");
MODULE_PARM_DESC(max_rx_desc, "AceNIC/3C985/GA620 max number of receive descriptors to wait");
MODULE_PARM_DESC(tx_ratio, "AceNIC/3C985/GA620 ratio of NIC memory used for TX/RX descriptors (range 0-63)");
#endif
fail_uninit:
ace_init_cleanup(dev);
fail_free_netdev:
free_netdev(dev);
return -ENODEV;
}
static void __exit ace_module_cleanup(void) static void __devexit acenic_remove_one(struct pci_dev *pdev)
{ {
struct ace_private *ap; struct net_device *dev = pci_get_drvdata(pdev);
struct ace_regs *regs; struct ace_private *ap = dev->priv;
struct net_device *next; struct ace_regs *regs = ap->regs;
short i; short i;
while (root_dev) { unregister_netdev(dev);
ap = root_dev->priv;
next = ap->next;
unregister_netdev(root_dev);
regs = ap->regs; writel(readl(&regs->CpuCtrl) | CPU_HALT, &regs->CpuCtrl);
if (ap->version >= 2)
writel(readl(&regs->CpuCtrl) | CPU_HALT, &regs->CpuCtrl); writel(readl(&regs->CpuBCtrl) | CPU_HALT, &regs->CpuBCtrl);
if (ap->version >= 2)
writel(readl(&regs->CpuBCtrl) | CPU_HALT, /*
&regs->CpuBCtrl); * This clears any pending interrupts
/* */
* This clears any pending interrupts writel(1, &regs->Mb0Lo);
*/ readl(&regs->CpuCtrl); /* flush */
writel(1, &regs->Mb0Lo);
readl(&regs->CpuCtrl); /* flush */
/* /*
* Make sure no other CPUs are processing interrupts * Make sure no other CPUs are processing interrupts
* on the card before the buffers are being released. * on the card before the buffers are being released.
* Otherwise one might experience some `interesting' * Otherwise one might experience some `interesting'
* effects. * effects.
* *
* Then release the RX buffers - jumbo buffers were * Then release the RX buffers - jumbo buffers were
* already released in ace_close(). * already released in ace_close().
*/ */
ace_sync_irq(root_dev->irq); ace_sync_irq(dev->irq);
for (i = 0; i < RX_STD_RING_ENTRIES; i++) { for (i = 0; i < RX_STD_RING_ENTRIES; i++) {
struct sk_buff *skb = ap->skb->rx_std_skbuff[i].skb; struct sk_buff *skb = ap->skb->rx_std_skbuff[i].skb;
if (skb) { if (skb) {
struct ring_info *ringp; struct ring_info *ringp;
dma_addr_t mapping; dma_addr_t mapping;
ringp = &ap->skb->rx_std_skbuff[i]; ringp = &ap->skb->rx_std_skbuff[i];
mapping = pci_unmap_addr(ringp, mapping); mapping = pci_unmap_addr(ringp, mapping);
pci_unmap_page(ap->pdev, mapping, pci_unmap_page(ap->pdev, mapping,
ACE_STD_BUFSIZE - (2 + 16), ACE_STD_BUFSIZE - (2 + 16),
PCI_DMA_FROMDEVICE); PCI_DMA_FROMDEVICE);
ap->rx_std_ring[i].size = 0; ap->rx_std_ring[i].size = 0;
ap->skb->rx_std_skbuff[i].skb = NULL; ap->skb->rx_std_skbuff[i].skb = NULL;
dev_kfree_skb(skb); dev_kfree_skb(skb);
}
}
if (ap->version >= 2) {
for (i = 0; i < RX_MINI_RING_ENTRIES; i++) {
struct sk_buff *skb = ap->skb->rx_mini_skbuff[i].skb;
if (skb) {
struct ring_info *ringp;
dma_addr_t mapping;
ringp = &ap->skb->rx_mini_skbuff[i];
mapping = pci_unmap_addr(ringp,mapping);
pci_unmap_page(ap->pdev, mapping,
ACE_MINI_BUFSIZE - (2 + 16),
PCI_DMA_FROMDEVICE);
ap->rx_mini_ring[i].size = 0;
ap->skb->rx_mini_skbuff[i].skb = NULL;
dev_kfree_skb(skb);
}
}
} }
for (i = 0; i < RX_JUMBO_RING_ENTRIES; i++) { }
struct sk_buff *skb = ap->skb->rx_jumbo_skbuff[i].skb;
if (ap->version >= 2) {
for (i = 0; i < RX_MINI_RING_ENTRIES; i++) {
struct sk_buff *skb = ap->skb->rx_mini_skbuff[i].skb;
if (skb) { if (skb) {
struct ring_info *ringp; struct ring_info *ringp;
dma_addr_t mapping; dma_addr_t mapping;
ringp = &ap->skb->rx_jumbo_skbuff[i]; ringp = &ap->skb->rx_mini_skbuff[i];
mapping = pci_unmap_addr(ringp, mapping); mapping = pci_unmap_addr(ringp,mapping);
pci_unmap_page(ap->pdev, mapping, pci_unmap_page(ap->pdev, mapping,
ACE_JUMBO_BUFSIZE - (2 + 16), ACE_MINI_BUFSIZE - (2 + 16),
PCI_DMA_FROMDEVICE); PCI_DMA_FROMDEVICE);
ap->rx_jumbo_ring[i].size = 0; ap->rx_mini_ring[i].size = 0;
ap->skb->rx_jumbo_skbuff[i].skb = NULL; ap->skb->rx_mini_skbuff[i].skb = NULL;
dev_kfree_skb(skb); dev_kfree_skb(skb);
} }
} }
ace_init_cleanup(root_dev);
free_netdev(root_dev);
root_dev = next;
} }
}
for (i = 0; i < RX_JUMBO_RING_ENTRIES; i++) {
struct sk_buff *skb = ap->skb->rx_jumbo_skbuff[i].skb;
if (skb) {
struct ring_info *ringp;
dma_addr_t mapping;
int __init ace_module_init(void) ringp = &ap->skb->rx_jumbo_skbuff[i];
{ mapping = pci_unmap_addr(ringp, mapping);
int status; pci_unmap_page(ap->pdev, mapping,
ACE_JUMBO_BUFSIZE - (2 + 16),
PCI_DMA_FROMDEVICE);
root_dev = NULL; ap->rx_jumbo_ring[i].size = 0;
ap->skb->rx_jumbo_skbuff[i].skb = NULL;
dev_kfree_skb(skb);
}
}
#ifdef NEW_NETINIT ace_init_cleanup(dev);
status = acenic_probe(); free_netdev(dev);
#else
status = acenic_probe(NULL);
#endif
return status;
} }
static struct pci_driver acenic_pci_driver = {
.name = "acenic",
.id_table = acenic_pci_tbl,
.probe = acenic_probe_one,
.remove = __devexit_p(acenic_remove_one),
};
#if (LINUX_VERSION_CODE < 0x02032a) static int __init acenic_init(void)
#ifdef MODULE
int init_module(void)
{ {
return ace_module_init(); return pci_module_init(&acenic_pci_driver);
} }
static void __exit acenic_exit(void)
void cleanup_module(void)
{ {
ace_module_cleanup(); pci_unregister_driver(&acenic_pci_driver);
} }
#endif
#else
module_init(ace_module_init);
module_exit(ace_module_cleanup);
#endif
module_init(acenic_init);
module_exit(acenic_exit);
static void ace_free_descriptors(struct net_device *dev) static void ace_free_descriptors(struct net_device *dev)
{ {
...@@ -1462,13 +1203,6 @@ static int __init ace_init(struct net_device *dev) ...@@ -1462,13 +1203,6 @@ static int __init ace_init(struct net_device *dev)
} else } else
dev->irq = pdev->irq; dev->irq = pdev->irq;
/*
* Register the device here to be able to catch allocated
* interrupt handlers in case the firmware doesn't come up.
*/
ap->next = root_dev;
root_dev = dev;
#ifdef INDEX_DEBUG #ifdef INDEX_DEBUG
spin_lock_init(&ap->debug_lock); spin_lock_init(&ap->debug_lock);
ap->last_tx = ACE_TX_RING_ENTRIES(ap) - 1; ap->last_tx = ACE_TX_RING_ENTRIES(ap) - 1;
...@@ -2642,8 +2376,6 @@ static int ace_open(struct net_device *dev) ...@@ -2642,8 +2376,6 @@ static int ace_open(struct net_device *dev)
netif_start_queue(dev); netif_start_queue(dev);
ACE_MOD_INC_USE_COUNT;
/* /*
* Setup the bottom half rx ring refill handler * Setup the bottom half rx ring refill handler
*/ */
...@@ -2660,8 +2392,6 @@ static int ace_close(struct net_device *dev) ...@@ -2660,8 +2392,6 @@ static int ace_close(struct net_device *dev)
unsigned long flags; unsigned long flags;
short i; short i;
ace_if_down(dev);
/* /*
* Without (or before) releasing irq and stopping hardware, this * Without (or before) releasing irq and stopping hardware, this
* is an absolute non-sense, by the way. It will be reset instantly * is an absolute non-sense, by the way. It will be reset instantly
...@@ -2733,7 +2463,6 @@ static int ace_close(struct net_device *dev) ...@@ -2733,7 +2463,6 @@ static int ace_close(struct net_device *dev)
ace_unmask_irq(dev); ace_unmask_irq(dev);
local_irq_restore(flags); local_irq_restore(flags);
ACE_MOD_DEC_USE_COUNT;
return 0; return 0;
} }
...@@ -2790,12 +2519,6 @@ static int ace_start_xmit(struct sk_buff *skb, struct net_device *dev) ...@@ -2790,12 +2519,6 @@ static int ace_start_xmit(struct sk_buff *skb, struct net_device *dev)
struct tx_desc *desc; struct tx_desc *desc;
u32 idx, flagsize; u32 idx, flagsize;
/*
* This only happens with pre-softnet, ie. 2.2.x kernels.
*/
if (early_stop_netif_stop_queue(dev))
return 1;
restart: restart:
idx = ap->tx_prd; idx = ap->tx_prd;
......
drivers/net/e1000/e1000.h
View file @ ee86da9d
...@@ -71,6 +71,7 @@ ...@@ -71,6 +71,7 @@
#include <linux/mii.h> #include <linux/mii.h>
#include <linux/ethtool.h> #include <linux/ethtool.h>
#include <linux/if_vlan.h> #include <linux/if_vlan.h>
#include <linux/moduleparam.h>
#define BAR_0 0 #define BAR_0 0
#define BAR_1 1 #define BAR_1 1
...@@ -89,6 +90,12 @@ struct e1000_adapter; ...@@ -89,6 +90,12 @@ struct e1000_adapter;
#define E1000_ERR(args...) printk(KERN_ERR "e1000: " args) #define E1000_ERR(args...) printk(KERN_ERR "e1000: " args)
#define PFX "e1000: "
#define DPRINTK(nlevel, klevel, fmt, args...) \
(void)((NETIF_MSG_##nlevel & adapter->msg_enable) && \
printk(KERN_##klevel PFX "%s: %s: " fmt, adapter->netdev->name, \
__FUNCTION__ , ## args))
#define E1000_MAX_INTR 10 #define E1000_MAX_INTR 10
/* How many descriptors for TX and RX ? */ /* How many descriptors for TX and RX ? */
...@@ -245,5 +252,6 @@ struct e1000_adapter { ...@@ -245,5 +252,6 @@ struct e1000_adapter {
uint32_t pci_state[16]; uint32_t pci_state[16];
int msg_enable;
}; };
#endif /* _E1000_H_ */ #endif /* _E1000_H_ */
drivers/net/e1000/e1000_ethtool.c
View file @ ee86da9d
...@@ -53,7 +53,7 @@ struct e1000_stats { ...@@ -53,7 +53,7 @@ struct e1000_stats {
#define E1000_STAT(m) sizeof(((struct e1000_adapter *)0)->m), \ #define E1000_STAT(m) sizeof(((struct e1000_adapter *)0)->m), \
offsetof(struct e1000_adapter, m) offsetof(struct e1000_adapter, m)
static struct e1000_stats e1000_gstrings_stats[] = { static const struct e1000_stats e1000_gstrings_stats[] = {
{ "rx_packets", E1000_STAT(net_stats.rx_packets) }, { "rx_packets", E1000_STAT(net_stats.rx_packets) },
{ "tx_packets", E1000_STAT(net_stats.tx_packets) }, { "tx_packets", E1000_STAT(net_stats.tx_packets) },
{ "rx_bytes", E1000_STAT(net_stats.rx_bytes) }, { "rx_bytes", E1000_STAT(net_stats.rx_bytes) },
...@@ -89,20 +89,22 @@ static struct e1000_stats e1000_gstrings_stats[] = { ...@@ -89,20 +89,22 @@ static struct e1000_stats e1000_gstrings_stats[] = {
{ "tx_flow_control_xon", E1000_STAT(stats.xontxc) }, { "tx_flow_control_xon", E1000_STAT(stats.xontxc) },
{ "tx_flow_control_xoff", E1000_STAT(stats.xofftxc) }, { "tx_flow_control_xoff", E1000_STAT(stats.xofftxc) },
{ "rx_csum_offload_good", E1000_STAT(hw_csum_good) }, { "rx_csum_offload_good", E1000_STAT(hw_csum_good) },
{ "rx_csum_offload_errors", E1000_STAT(hw_csum_err) } { "rx_csum_offload_errors", E1000_STAT(hw_csum_err) },
{ "rx_long_byte_count", E1000_STAT(stats.gorcl) }
}; };
#define E1000_STATS_LEN \ #define E1000_STATS_LEN \
sizeof(e1000_gstrings_stats) / sizeof(struct e1000_stats) sizeof(e1000_gstrings_stats) / sizeof(struct e1000_stats)
static char e1000_gstrings_test[][ETH_GSTRING_LEN] = { static const char e1000_gstrings_test[][ETH_GSTRING_LEN] = {
"Register test (offline)", "Eeprom test (offline)", "Register test (offline)", "Eeprom test (offline)",
"Interrupt test (offline)", "Loopback test (offline)", "Interrupt test (offline)", "Loopback test (offline)",
"Link test (on/offline)" "Link test (on/offline)"
}; };
#define E1000_TEST_LEN sizeof(e1000_gstrings_test) / ETH_GSTRING_LEN #define E1000_TEST_LEN sizeof(e1000_gstrings_test) / ETH_GSTRING_LEN
static void static int
e1000_ethtool_gset(struct e1000_adapter *adapter, struct ethtool_cmd *ecmd) e1000_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
{ {
struct e1000_adapter *adapter = netdev->priv;
struct e1000_hw *hw = &adapter->hw; struct e1000_hw *hw = &adapter->hw;
if(hw->media_type == e1000_media_type_copper) { if(hw->media_type == e1000_media_type_copper) {
...@@ -169,11 +171,13 @@ e1000_ethtool_gset(struct e1000_adapter *adapter, struct ethtool_cmd *ecmd) ...@@ -169,11 +171,13 @@ e1000_ethtool_gset(struct e1000_adapter *adapter, struct ethtool_cmd *ecmd)
} }
ecmd->autoneg = (hw->autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE); ecmd->autoneg = (hw->autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE);
return 0;
} }
static int static int
e1000_ethtool_sset(struct e1000_adapter *adapter, struct ethtool_cmd *ecmd) e1000_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
{ {
struct e1000_adapter *adapter = netdev->priv;
struct e1000_hw *hw = &adapter->hw; struct e1000_hw *hw = &adapter->hw;
if(ecmd->autoneg == AUTONEG_ENABLE) { if(ecmd->autoneg == AUTONEG_ENABLE) {
...@@ -195,42 +199,41 @@ e1000_ethtool_sset(struct e1000_adapter *adapter, struct ethtool_cmd *ecmd) ...@@ -195,42 +199,41 @@ e1000_ethtool_sset(struct e1000_adapter *adapter, struct ethtool_cmd *ecmd)
return 0; return 0;
} }
static int static void
e1000_ethtool_gpause(struct e1000_adapter *adapter, e1000_get_pauseparam(struct net_device *netdev,
struct ethtool_pauseparam *epause) struct ethtool_pauseparam *pause)
{ {
struct e1000_adapter *adapter = netdev->priv;
struct e1000_hw *hw = &adapter->hw; struct e1000_hw *hw = &adapter->hw;
pause->autoneg =
epause->autoneg =
(adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE); (adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE);
if(hw->fc == e1000_fc_rx_pause) if(hw->fc == e1000_fc_rx_pause)
epause->rx_pause = 1; pause->rx_pause = 1;
else if(hw->fc == e1000_fc_tx_pause) else if(hw->fc == e1000_fc_tx_pause)
epause->tx_pause = 1; pause->tx_pause = 1;
else if(hw->fc == e1000_fc_full) { else if(hw->fc == e1000_fc_full) {
epause->rx_pause = 1; pause->rx_pause = 1;
epause->tx_pause = 1; pause->tx_pause = 1;
} }
return 0;
} }
static int static int
e1000_ethtool_spause(struct e1000_adapter *adapter, e1000_set_pauseparam(struct net_device *netdev,
struct ethtool_pauseparam *epause) struct ethtool_pauseparam *pause)
{ {
struct e1000_adapter *adapter = netdev->priv;
struct e1000_hw *hw = &adapter->hw; struct e1000_hw *hw = &adapter->hw;
adapter->fc_autoneg = epause->autoneg; adapter->fc_autoneg = pause->autoneg;
if(epause->rx_pause && epause->tx_pause) if(pause->rx_pause && pause->tx_pause)
hw->fc = e1000_fc_full; hw->fc = e1000_fc_full;
else if(epause->rx_pause && !epause->tx_pause) else if(pause->rx_pause && !pause->tx_pause)
hw->fc = e1000_fc_rx_pause; hw->fc = e1000_fc_rx_pause;
else if(!epause->rx_pause && epause->tx_pause) else if(!pause->rx_pause && pause->tx_pause)
hw->fc = e1000_fc_tx_pause; hw->fc = e1000_fc_tx_pause;
else if(!epause->rx_pause && !epause->tx_pause) else if(!pause->rx_pause && !pause->tx_pause)
hw->fc = e1000_fc_none; hw->fc = e1000_fc_none;
hw->original_fc = hw->fc; hw->original_fc = hw->fc;
...@@ -248,28 +251,124 @@ e1000_ethtool_spause(struct e1000_adapter *adapter, ...@@ -248,28 +251,124 @@ e1000_ethtool_spause(struct e1000_adapter *adapter,
return 0; return 0;
} }
static uint32_t
e1000_get_rx_csum(struct net_device *netdev)
{
struct e1000_adapter *adapter = netdev->priv;
return adapter->rx_csum;
}
static int
e1000_set_rx_csum(struct net_device *netdev, uint32_t data)
{
struct e1000_adapter *adapter = netdev->priv;
adapter->rx_csum = data;
if(netif_running(netdev)) {
e1000_down(adapter);
e1000_up(adapter);
} else
e1000_reset(adapter);
return 0;
}
static uint32_t
e1000_get_tx_csum(struct net_device *netdev)
{
return (netdev->features & NETIF_F_HW_CSUM) != 0;
}
static int
e1000_set_tx_csum(struct net_device *netdev, uint32_t data)
{
struct e1000_adapter *adapter = netdev->priv;
if(adapter->hw.mac_type < e1000_82543) {
if (!data)
return -EINVAL;
return 0;
}
if (data)
netdev->features |= NETIF_F_HW_CSUM;
else
netdev->features &= ~NETIF_F_HW_CSUM;
return 0;
}
static uint32_t
e1000_get_sg(struct net_device *netdev)
{
return (netdev->features & NETIF_F_SG) != 0;
}
static int
e1000_set_sg(struct net_device *netdev, uint32_t data)
{
if (data)
netdev->features |= NETIF_F_SG;
else
netdev->features &= ~NETIF_F_SG;
return 0;
}
#ifdef NETIF_F_TSO
static uint32_t
e1000_get_tso(struct net_device *netdev)
{
return (netdev->features & NETIF_F_TSO) != 0;
}
static int
e1000_set_tso(struct net_device *netdev, uint32_t data)
{
struct e1000_adapter *adapter = netdev->priv;
if ((adapter->hw.mac_type < e1000_82544) ||
(adapter->hw.mac_type == e1000_82547))
return data ? -EINVAL : 0;
if (data)
netdev->features |= NETIF_F_TSO;
else
netdev->features &= ~NETIF_F_TSO;
return 0;
}
#endif /* NETIF_F_TSO */
static uint32_t
e1000_get_msglevel(struct net_device *netdev)
{
struct e1000_adapter *adapter = netdev->priv;
return adapter->msg_enable;
}
static void static void
e1000_ethtool_gdrvinfo(struct e1000_adapter *adapter, e1000_set_msglevel(struct net_device *netdev, uint32_t data)
struct ethtool_drvinfo *drvinfo) {
struct e1000_adapter *adapter = netdev->priv;
adapter->msg_enable = data;
}
static int
e1000_get_regs_len(struct net_device *netdev)
{ {
strncpy(drvinfo->driver, e1000_driver_name, 32);
strncpy(drvinfo->version, e1000_driver_version, 32);
strncpy(drvinfo->fw_version, "N/A", 32);
strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
drvinfo->n_stats = E1000_STATS_LEN;
drvinfo->testinfo_len = E1000_TEST_LEN;
#define E1000_REGS_LEN 32 #define E1000_REGS_LEN 32
drvinfo->regdump_len = E1000_REGS_LEN * sizeof(uint32_t); return E1000_REGS_LEN * sizeof(uint32_t);
drvinfo->eedump_len = adapter->hw.eeprom.word_size * 2;
} }
static void static void
e1000_ethtool_gregs(struct e1000_adapter *adapter, e1000_get_regs(struct net_device *netdev,
struct ethtool_regs *regs, uint32_t *regs_buff) struct ethtool_regs *regs, void *p)
{ {
struct e1000_adapter *adapter = netdev->priv;
struct e1000_hw *hw = &adapter->hw; struct e1000_hw *hw = &adapter->hw;
uint32_t *regs_buff = p;
uint16_t phy_data; uint16_t phy_data;
memset(p, 0, E1000_REGS_LEN * sizeof(uint32_t));
regs->version = (1 << 24) | (hw->revision_id << 16) | hw->device_id; regs->version = (1 << 24) | (hw->revision_id << 16) | hw->device_id;
regs_buff[0] = E1000_READ_REG(hw, CTRL); regs_buff[0] = E1000_READ_REG(hw, CTRL);
...@@ -342,37 +441,39 @@ e1000_ethtool_gregs(struct e1000_adapter *adapter, ...@@ -342,37 +441,39 @@ e1000_ethtool_gregs(struct e1000_adapter *adapter,
e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data); e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data);
regs_buff[24] = (uint32_t)phy_data; /* phy local receiver status */ regs_buff[24] = (uint32_t)phy_data; /* phy local receiver status */
regs_buff[25] = regs_buff[24]; /* phy remote receiver status */ regs_buff[25] = regs_buff[24]; /* phy remote receiver status */
}
return; static int
e1000_get_eeprom_len(struct net_device *netdev)
{
struct e1000_adapter *adapter = netdev->priv;
return adapter->hw.eeprom.word_size * 2;
} }
static int static int
e1000_ethtool_geeprom(struct e1000_adapter *adapter, e1000_get_eeprom(struct net_device *netdev,
struct ethtool_eeprom *eeprom, uint16_t *eeprom_buff) struct ethtool_eeprom *eeprom, uint8_t *bytes)
{ {
struct e1000_adapter *adapter = netdev->priv;
struct e1000_hw *hw = &adapter->hw; struct e1000_hw *hw = &adapter->hw;
uint16_t *eeprom_buff;
int first_word, last_word; int first_word, last_word;
int ret_val = 0; int ret_val = 0;
uint16_t i; uint16_t i;
if(eeprom->len == 0) { if(eeprom->len == 0)
ret_val = -EINVAL; return -EINVAL;
goto geeprom_error;
}
eeprom->magic = hw->vendor_id | (hw->device_id << 16); eeprom->magic = hw->vendor_id | (hw->device_id << 16);
if(eeprom->offset > eeprom->offset + eeprom->len) {
ret_val = -EINVAL;
goto geeprom_error;
}
if((eeprom->offset + eeprom->len) > (hw->eeprom.word_size * 2))
eeprom->len = ((hw->eeprom.word_size * 2) - eeprom->offset);
first_word = eeprom->offset >> 1; first_word = eeprom->offset >> 1;
last_word = (eeprom->offset + eeprom->len - 1) >> 1; last_word = (eeprom->offset + eeprom->len - 1) >> 1;
eeprom_buff = kmalloc(sizeof(uint16_t) *
(last_word - first_word + 1), GFP_KERNEL);
if (!eeprom_buff)
return -ENOMEM;
if(hw->eeprom.type == e1000_eeprom_spi) if(hw->eeprom.type == e1000_eeprom_spi)
ret_val = e1000_read_eeprom(hw, first_word, ret_val = e1000_read_eeprom(hw, first_word,
last_word - first_word + 1, last_word - first_word + 1,
...@@ -388,14 +489,19 @@ e1000_ethtool_geeprom(struct e1000_adapter *adapter, ...@@ -388,14 +489,19 @@ e1000_ethtool_geeprom(struct e1000_adapter *adapter,
for (i = 0; i < last_word - first_word + 1; i++) for (i = 0; i < last_word - first_word + 1; i++)
le16_to_cpus(&eeprom_buff[i]); le16_to_cpus(&eeprom_buff[i]);
geeprom_error:
memcpy(bytes, (uint8_t *)eeprom_buff + (eeprom->offset%2),
eeprom->len);
kfree(eeprom_buff);
return ret_val; return ret_val;
} }
static int static int
e1000_ethtool_seeprom(struct e1000_adapter *adapter, e1000_set_eeprom(struct net_device *netdev,
struct ethtool_eeprom *eeprom, void *user_data) struct ethtool_eeprom *eeprom, uint8_t *bytes)
{ {
struct e1000_adapter *adapter = netdev->priv;
struct e1000_hw *hw = &adapter->hw; struct e1000_hw *hw = &adapter->hw;
uint16_t *eeprom_buff; uint16_t *eeprom_buff;
void *ptr; void *ptr;
...@@ -410,9 +516,6 @@ e1000_ethtool_seeprom(struct e1000_adapter *adapter, ...@@ -410,9 +516,6 @@ e1000_ethtool_seeprom(struct e1000_adapter *adapter,
max_len = hw->eeprom.word_size * 2; max_len = hw->eeprom.word_size * 2;
if((eeprom->offset + eeprom->len) > max_len)
eeprom->len = (max_len - eeprom->offset);
first_word = eeprom->offset >> 1; first_word = eeprom->offset >> 1;
last_word = (eeprom->offset + eeprom->len - 1) >> 1; last_word = (eeprom->offset + eeprom->len - 1) >> 1;
eeprom_buff = kmalloc(max_len, GFP_KERNEL); eeprom_buff = kmalloc(max_len, GFP_KERNEL);
...@@ -439,11 +542,7 @@ e1000_ethtool_seeprom(struct e1000_adapter *adapter, ...@@ -439,11 +542,7 @@ e1000_ethtool_seeprom(struct e1000_adapter *adapter,
for (i = 0; i < last_word - first_word + 1; i++) for (i = 0; i < last_word - first_word + 1; i++)
le16_to_cpus(&eeprom_buff[i]); le16_to_cpus(&eeprom_buff[i]);
if((ret_val != 0) || copy_from_user(ptr, user_data, eeprom->len)) { memcpy(ptr, bytes, eeprom->len);
ret_val = -EFAULT;
goto seeprom_error;
}
for (i = 0; i < last_word - first_word + 1; i++) for (i = 0; i < last_word - first_word + 1; i++)
eeprom_buff[i] = cpu_to_le16(eeprom_buff[i]); eeprom_buff[i] = cpu_to_le16(eeprom_buff[i]);
...@@ -454,15 +553,31 @@ e1000_ethtool_seeprom(struct e1000_adapter *adapter, ...@@ -454,15 +553,31 @@ e1000_ethtool_seeprom(struct e1000_adapter *adapter,
if((ret_val == 0) && first_word <= EEPROM_CHECKSUM_REG) if((ret_val == 0) && first_word <= EEPROM_CHECKSUM_REG)
e1000_update_eeprom_checksum(hw); e1000_update_eeprom_checksum(hw);
seeprom_error:
kfree(eeprom_buff); kfree(eeprom_buff);
return ret_val; return ret_val;
} }
static int static void
e1000_ethtool_gring(struct e1000_adapter *adapter, e1000_get_drvinfo(struct net_device *netdev,
struct ethtool_drvinfo *drvinfo)
{
struct e1000_adapter *adapter = netdev->priv;
strncpy(drvinfo->driver, e1000_driver_name, 32);
strncpy(drvinfo->version, e1000_driver_version, 32);
strncpy(drvinfo->fw_version, "N/A", 32);
strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
drvinfo->n_stats = E1000_STATS_LEN;
drvinfo->testinfo_len = E1000_TEST_LEN;
drvinfo->regdump_len = e1000_get_regs_len(netdev);
drvinfo->eedump_len = e1000_get_eeprom_len(netdev);
}
static void
e1000_get_ringparam(struct net_device *netdev,
struct ethtool_ringparam *ring) struct ethtool_ringparam *ring)
{ {
struct e1000_adapter *adapter = netdev->priv;
e1000_mac_type mac_type = adapter->hw.mac_type; e1000_mac_type mac_type = adapter->hw.mac_type;
struct e1000_desc_ring *txdr = &adapter->tx_ring; struct e1000_desc_ring *txdr = &adapter->tx_ring;
struct e1000_desc_ring *rxdr = &adapter->rx_ring; struct e1000_desc_ring *rxdr = &adapter->rx_ring;
...@@ -477,14 +592,14 @@ e1000_ethtool_gring(struct e1000_adapter *adapter, ...@@ -477,14 +592,14 @@ e1000_ethtool_gring(struct e1000_adapter *adapter,
ring->tx_pending = txdr->count; ring->tx_pending = txdr->count;
ring->rx_mini_pending = 0; ring->rx_mini_pending = 0;
ring->rx_jumbo_pending = 0; ring->rx_jumbo_pending = 0;
return 0;
} }
static int static int
e1000_ethtool_sring(struct e1000_adapter *adapter, e1000_set_ringparam(struct net_device *netdev,
struct ethtool_ringparam *ring) struct ethtool_ringparam *ring)
{ {
int err; int err;
struct e1000_adapter *adapter = netdev->priv;
e1000_mac_type mac_type = adapter->hw.mac_type; e1000_mac_type mac_type = adapter->hw.mac_type;
struct e1000_desc_ring *txdr = &adapter->tx_ring; struct e1000_desc_ring *txdr = &adapter->tx_ring;
struct e1000_desc_ring *rxdr = &adapter->rx_ring; struct e1000_desc_ring *rxdr = &adapter->rx_ring;
...@@ -538,6 +653,7 @@ e1000_ethtool_sring(struct e1000_adapter *adapter, ...@@ -538,6 +653,7 @@ e1000_ethtool_sring(struct e1000_adapter *adapter,
return err; return err;
} }
#define REG_PATTERN_TEST(R, M, W) \ #define REG_PATTERN_TEST(R, M, W) \
{ \ { \
uint32_t pat, value; \ uint32_t pat, value; \
...@@ -628,6 +744,7 @@ e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data) ...@@ -628,6 +744,7 @@ e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data)
for(i = 0; i < E1000_MC_TBL_SIZE; i++) for(i = 0; i < E1000_MC_TBL_SIZE; i++)
REG_PATTERN_TEST(MTA + (i << 2), 0xFFFFFFFF, 0xFFFFFFFF); REG_PATTERN_TEST(MTA + (i << 2), 0xFFFFFFFF, 0xFFFFFFFF);
*data = 0;
return 0; return 0;
} }
...@@ -939,8 +1056,6 @@ e1000_phy_disable_receiver(struct e1000_adapter *adapter) ...@@ -939,8 +1056,6 @@ e1000_phy_disable_receiver(struct e1000_adapter *adapter)
e1000_write_phy_reg(&adapter->hw, 30, 0x8FFC); e1000_write_phy_reg(&adapter->hw, 30, 0x8FFC);
e1000_write_phy_reg(&adapter->hw, 29, 0x001A); e1000_write_phy_reg(&adapter->hw, 29, 0x001A);
e1000_write_phy_reg(&adapter->hw, 30, 0x8FF0); e1000_write_phy_reg(&adapter->hw, 30, 0x8FF0);
return;
} }
static void static void
...@@ -1219,16 +1334,16 @@ e1000_run_loopback_test(struct e1000_adapter *adapter) ...@@ -1219,16 +1334,16 @@ e1000_run_loopback_test(struct e1000_adapter *adapter)
for(i = 0; i < 64; i++) { for(i = 0; i < 64; i++) {
e1000_create_lbtest_frame(txdr->buffer_info[i].skb, 1024); e1000_create_lbtest_frame(txdr->buffer_info[i].skb, 1024);
pci_dma_sync_single_for_device(pdev, txdr->buffer_info[i].dma, pci_dma_sync_single(pdev, txdr->buffer_info[i].dma,
txdr->buffer_info[i].length, txdr->buffer_info[i].length,
PCI_DMA_TODEVICE); PCI_DMA_TODEVICE);
} }
E1000_WRITE_REG(&adapter->hw, TDT, i); E1000_WRITE_REG(&adapter->hw, TDT, i);
msec_delay(200); msec_delay(200);
pci_dma_sync_single_for_cpu(pdev, rxdr->buffer_info[0].dma, pci_dma_sync_single(pdev, rxdr->buffer_info[0].dma,
rxdr->buffer_info[0].length, PCI_DMA_FROMDEVICE); rxdr->buffer_info[0].length, PCI_DMA_FROMDEVICE);
return e1000_check_lbtest_frame(rxdr->buffer_info[0].skb, 1024); return e1000_check_lbtest_frame(rxdr->buffer_info[0].skb, 1024);
} }
...@@ -1257,15 +1372,27 @@ e1000_link_test(struct e1000_adapter *adapter, uint64_t *data) ...@@ -1257,15 +1372,27 @@ e1000_link_test(struct e1000_adapter *adapter, uint64_t *data)
return *data; return *data;
} }
static int static int
e1000_ethtool_test(struct e1000_adapter *adapter, e1000_diag_test_count(struct net_device *netdev)
{
return E1000_TEST_LEN;
}
static void
e1000_diag_test(struct net_device *netdev,
struct ethtool_test *eth_test, uint64_t *data) struct ethtool_test *eth_test, uint64_t *data)
{ {
boolean_t if_running = netif_running(adapter->netdev); struct e1000_adapter *adapter = netdev->priv;
boolean_t if_running = netif_running(netdev);
if(eth_test->flags == ETH_TEST_FL_OFFLINE) { if(eth_test->flags == ETH_TEST_FL_OFFLINE) {
/* Offline tests */ /* Offline tests */
/* save speed, duplex, autoneg settings */
uint16_t autoneg_advertised = adapter->hw.autoneg_advertised;
uint8_t forced_speed_duplex = adapter->hw.forced_speed_duplex;
uint8_t autoneg = adapter->hw.autoneg;
/* Link test performed before hardware reset so autoneg doesn't /* Link test performed before hardware reset so autoneg doesn't
* interfere with test result */ * interfere with test result */
if(e1000_link_test(adapter, &data[4])) if(e1000_link_test(adapter, &data[4]))
...@@ -1291,6 +1418,10 @@ e1000_ethtool_test(struct e1000_adapter *adapter, ...@@ -1291,6 +1418,10 @@ e1000_ethtool_test(struct e1000_adapter *adapter,
if(e1000_loopback_test(adapter, &data[3])) if(e1000_loopback_test(adapter, &data[3]))
eth_test->flags |= ETH_TEST_FL_FAILED; eth_test->flags |= ETH_TEST_FL_FAILED;
/* restore Autoneg/speed/duplex settings */
adapter->hw.autoneg_advertised = autoneg_advertised;
adapter->hw.forced_speed_duplex = forced_speed_duplex;
adapter->hw.autoneg = autoneg;
e1000_reset(adapter); e1000_reset(adapter);
if(if_running) if(if_running)
e1000_up(adapter); e1000_up(adapter);
...@@ -1305,12 +1436,12 @@ e1000_ethtool_test(struct e1000_adapter *adapter, ...@@ -1305,12 +1436,12 @@ e1000_ethtool_test(struct e1000_adapter *adapter,
data[2] = 0; data[2] = 0;
data[3] = 0; data[3] = 0;
} }
return 0;
} }
static void static void
e1000_ethtool_gwol(struct e1000_adapter *adapter, struct ethtool_wolinfo *wol) e1000_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
{ {
struct e1000_adapter *adapter = netdev->priv;
struct e1000_hw *hw = &adapter->hw; struct e1000_hw *hw = &adapter->hw;
switch(adapter->hw.device_id) { switch(adapter->hw.device_id) {
...@@ -1350,8 +1481,9 @@ e1000_ethtool_gwol(struct e1000_adapter *adapter, struct ethtool_wolinfo *wol) ...@@ -1350,8 +1481,9 @@ e1000_ethtool_gwol(struct e1000_adapter *adapter, struct ethtool_wolinfo *wol)
} }
static int static int
e1000_ethtool_swol(struct e1000_adapter *adapter, struct ethtool_wolinfo *wol) e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
{ {
struct e1000_adapter *adapter = netdev->priv;
struct e1000_hw *hw = &adapter->hw; struct e1000_hw *hw = &adapter->hw;
switch(adapter->hw.device_id) { switch(adapter->hw.device_id) {
...@@ -1387,7 +1519,6 @@ e1000_ethtool_swol(struct e1000_adapter *adapter, struct ethtool_wolinfo *wol) ...@@ -1387,7 +1519,6 @@ e1000_ethtool_swol(struct e1000_adapter *adapter, struct ethtool_wolinfo *wol)
return 0; return 0;
} }
/* toggle LED 4 times per second = 2 "blinks" per second */ /* toggle LED 4 times per second = 2 "blinks" per second */
#define E1000_ID_INTERVAL (HZ/4) #define E1000_ID_INTERVAL (HZ/4)
...@@ -1408,8 +1539,13 @@ e1000_led_blink_callback(unsigned long data) ...@@ -1408,8 +1539,13 @@ e1000_led_blink_callback(unsigned long data)
} }
static int static int
e1000_ethtool_led_blink(struct e1000_adapter *adapter, struct ethtool_value *id) e1000_phys_id(struct net_device *netdev, uint32_t data)
{ {
struct e1000_adapter *adapter = netdev->priv;
if(!data || data > (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ))
data = (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ);
if(!adapter->blink_timer.function) { if(!adapter->blink_timer.function) {
init_timer(&adapter->blink_timer); init_timer(&adapter->blink_timer);
adapter->blink_timer.function = e1000_led_blink_callback; adapter->blink_timer.function = e1000_led_blink_callback;
...@@ -1420,11 +1556,8 @@ e1000_ethtool_led_blink(struct e1000_adapter *adapter, struct ethtool_value *id) ...@@ -1420,11 +1556,8 @@ e1000_ethtool_led_blink(struct e1000_adapter *adapter, struct ethtool_value *id)
mod_timer(&adapter->blink_timer, jiffies); mod_timer(&adapter->blink_timer, jiffies);
set_current_state(TASK_INTERRUPTIBLE); set_current_state(TASK_INTERRUPTIBLE);
if(id->data)
schedule_timeout(id->data * HZ);
else
schedule_timeout(MAX_SCHEDULE_TIMEOUT);
schedule_timeout(data * HZ);
del_timer_sync(&adapter->blink_timer); del_timer_sync(&adapter->blink_timer);
e1000_led_off(&adapter->hw); e1000_led_off(&adapter->hw);
clear_bit(E1000_LED_ON, &adapter->led_status); clear_bit(E1000_LED_ON, &adapter->led_status);
...@@ -1433,345 +1566,102 @@ e1000_ethtool_led_blink(struct e1000_adapter *adapter, struct ethtool_value *id) ...@@ -1433,345 +1566,102 @@ e1000_ethtool_led_blink(struct e1000_adapter *adapter, struct ethtool_value *id)
return 0; return 0;
} }
int static int
e1000_ethtool_ioctl(struct net_device *netdev, struct ifreq *ifr) e1000_nway_reset(struct net_device *netdev)
{ {
struct e1000_adapter *adapter = netdev->priv; struct e1000_adapter *adapter = netdev->priv;
void *addr = ifr->ifr_data; if(netif_running(netdev)) {
uint32_t cmd; e1000_down(adapter);
e1000_up(adapter);
if(get_user(cmd, (uint32_t *) addr))
return -EFAULT;
switch(cmd) {
case ETHTOOL_GSET: {
struct ethtool_cmd ecmd = {ETHTOOL_GSET};
e1000_ethtool_gset(adapter, &ecmd);
if(copy_to_user(addr, &ecmd, sizeof(ecmd)))
return -EFAULT;
return 0;
}
case ETHTOOL_SSET: {
struct ethtool_cmd ecmd;
if(copy_from_user(&ecmd, addr, sizeof(ecmd)))
return -EFAULT;
return e1000_ethtool_sset(adapter, &ecmd);
}
case ETHTOOL_GDRVINFO: {
struct ethtool_drvinfo drvinfo = {ETHTOOL_GDRVINFO};
e1000_ethtool_gdrvinfo(adapter, &drvinfo);
if(copy_to_user(addr, &drvinfo, sizeof(drvinfo)))
return -EFAULT;
return 0;
}
case ETHTOOL_GSTRINGS: {
struct ethtool_gstrings gstrings = { ETHTOOL_GSTRINGS };
char *strings = NULL;
int err = 0;
if(copy_from_user(&gstrings, addr, sizeof(gstrings)))
return -EFAULT;
switch(gstrings.string_set) {
case ETH_SS_TEST:
gstrings.len = E1000_TEST_LEN;
strings = kmalloc(E1000_TEST_LEN * ETH_GSTRING_LEN,
GFP_KERNEL);
if(!strings)
return -ENOMEM;
memcpy(strings, e1000_gstrings_test, E1000_TEST_LEN *
ETH_GSTRING_LEN);
break;
case ETH_SS_STATS: {
int i;
gstrings.len = E1000_STATS_LEN;
strings = kmalloc(E1000_STATS_LEN * ETH_GSTRING_LEN,
GFP_KERNEL);
if(!strings)
return -ENOMEM;
for(i=0; i < E1000_STATS_LEN; i++) {
memcpy(&strings[i * ETH_GSTRING_LEN],
e1000_gstrings_stats[i].stat_string,
ETH_GSTRING_LEN);
}
break;
}
default:
return -EOPNOTSUPP;
}
if(copy_to_user(addr, &gstrings, sizeof(gstrings)))
err = -EFAULT;
addr += offsetof(struct ethtool_gstrings, data);
if(!err && copy_to_user(addr, strings,
gstrings.len * ETH_GSTRING_LEN))
err = -EFAULT;
kfree(strings);
return err;
}
case ETHTOOL_GREGS: {
struct ethtool_regs regs = {ETHTOOL_GREGS};
uint32_t regs_buff[E1000_REGS_LEN];
if(copy_from_user(&regs, addr, sizeof(regs)))
return -EFAULT;
memset(regs_buff, 0, sizeof(regs_buff));
if (regs.len > E1000_REGS_LEN)
regs.len = E1000_REGS_LEN;
e1000_ethtool_gregs(adapter, &regs, regs_buff);
if(copy_to_user(addr, &regs, sizeof(regs)))
return -EFAULT;
addr += offsetof(struct ethtool_regs, data);
if(copy_to_user(addr, regs_buff, regs.len))
return -EFAULT;
return 0;
}
case ETHTOOL_NWAY_RST: {
if(netif_running(netdev)) {
e1000_down(adapter);
e1000_up(adapter);
}
return 0;
}
case ETHTOOL_PHYS_ID: {
struct ethtool_value id;
if(copy_from_user(&id, addr, sizeof(id)))
return -EFAULT;
return e1000_ethtool_led_blink(adapter, &id);
}
case ETHTOOL_GLINK: {
struct ethtool_value link = {ETHTOOL_GLINK};
link.data = netif_carrier_ok(netdev);
if(copy_to_user(addr, &link, sizeof(link)))
return -EFAULT;
return 0;
}
case ETHTOOL_GWOL: {
struct ethtool_wolinfo wol = {ETHTOOL_GWOL};
e1000_ethtool_gwol(adapter, &wol);
if(copy_to_user(addr, &wol, sizeof(wol)) != 0)
return -EFAULT;
return 0;
}
case ETHTOOL_SWOL: {
struct ethtool_wolinfo wol;
if(copy_from_user(&wol, addr, sizeof(wol)) != 0)
return -EFAULT;
return e1000_ethtool_swol(adapter, &wol);
}
case ETHTOOL_GEEPROM: {
struct ethtool_eeprom eeprom = {ETHTOOL_GEEPROM};
struct e1000_hw *hw = &adapter->hw;
uint16_t *eeprom_buff;
void *ptr;
int err = 0;
if(copy_from_user(&eeprom, addr, sizeof(eeprom)))
return -EFAULT;
eeprom_buff = kmalloc(hw->eeprom.word_size * 2, GFP_KERNEL);
if(!eeprom_buff)
return -ENOMEM;
if((err = e1000_ethtool_geeprom(adapter, &eeprom,
eeprom_buff)))
goto err_geeprom_ioctl;
if(copy_to_user(addr, &eeprom, sizeof(eeprom))) {
err = -EFAULT;
goto err_geeprom_ioctl;
}
addr += offsetof(struct ethtool_eeprom, data);
ptr = ((void *)eeprom_buff) + (eeprom.offset & 1);
if(copy_to_user(addr, ptr, eeprom.len))
err = -EFAULT;
err_geeprom_ioctl:
kfree(eeprom_buff);
return err;
}
case ETHTOOL_SEEPROM: {
struct ethtool_eeprom eeprom;
if(copy_from_user(&eeprom, addr, sizeof(eeprom)))
return -EFAULT;
addr += offsetof(struct ethtool_eeprom, data);
return e1000_ethtool_seeprom(adapter, &eeprom, addr);
}
case ETHTOOL_GRINGPARAM: {
struct ethtool_ringparam ering = {ETHTOOL_GRINGPARAM};
e1000_ethtool_gring(adapter, &ering);
if(copy_to_user(addr, &ering, sizeof(ering)))
return -EFAULT;
return 0;
}
case ETHTOOL_SRINGPARAM: {
struct ethtool_ringparam ering;
if(copy_from_user(&ering, addr, sizeof(ering)))
return -EFAULT;
return e1000_ethtool_sring(adapter, &ering);
}
case ETHTOOL_GPAUSEPARAM: {
struct ethtool_pauseparam epause = {ETHTOOL_GPAUSEPARAM};
e1000_ethtool_gpause(adapter, &epause);
if(copy_to_user(addr, &epause, sizeof(epause)))
return -EFAULT;
return 0;
}
case ETHTOOL_SPAUSEPARAM: {
struct ethtool_pauseparam epause;
if(copy_from_user(&epause, addr, sizeof(epause)))
return -EFAULT;
return e1000_ethtool_spause(adapter, &epause);
}
case ETHTOOL_GSTATS: {
struct {
struct ethtool_stats eth_stats;
uint64_t data[E1000_STATS_LEN];
} stats = { {ETHTOOL_GSTATS, E1000_STATS_LEN} };
int i;
e1000_update_stats(adapter);
for(i = 0; i < E1000_STATS_LEN; i++)
stats.data[i] = (e1000_gstrings_stats[i].sizeof_stat ==
sizeof(uint64_t)) ?
*(uint64_t *)((char *)adapter +
e1000_gstrings_stats[i].stat_offset) :
*(uint32_t *)((char *)adapter +
e1000_gstrings_stats[i].stat_offset);
if(copy_to_user(addr, &stats, sizeof(stats)))
return -EFAULT;
return 0;
} }
case ETHTOOL_TEST: { return 0;
struct { }
struct ethtool_test eth_test;
uint64_t data[E1000_TEST_LEN];
} test = { {ETHTOOL_TEST} };
int err;
if(copy_from_user(&test.eth_test, addr, sizeof(test.eth_test)))
return -EFAULT;
test.eth_test.len = E1000_TEST_LEN;
if((err = e1000_ethtool_test(adapter, &test.eth_test,
test.data)))
return err;
if(copy_to_user(addr, &test, sizeof(test)) != 0) static uint32_t
return -EFAULT; e1000_get_link(struct net_device *netdev)
return 0; {
} return netif_carrier_ok(netdev);
case ETHTOOL_GRXCSUM: { }
struct ethtool_value edata = { ETHTOOL_GRXCSUM };
edata.data = adapter->rx_csum; static int
if (copy_to_user(addr, &edata, sizeof(edata))) e1000_get_stats_count(struct net_device *netdev)
return -EFAULT; {
return 0; return E1000_STATS_LEN;
} }
case ETHTOOL_SRXCSUM: {
struct ethtool_value edata;
if (copy_from_user(&edata, addr, sizeof(edata))) static void
return -EFAULT; e1000_get_ethtool_stats(struct net_device *netdev,
adapter->rx_csum = edata.data; struct ethtool_stats *stats, uint64_t *data)
if(netif_running(netdev)) { {
e1000_down(adapter); struct e1000_adapter *adapter = netdev->priv;
e1000_up(adapter); int i;
} else
e1000_reset(adapter);
return 0;
}
case ETHTOOL_GTXCSUM: {
struct ethtool_value edata = { ETHTOOL_GTXCSUM };
edata.data = e1000_update_stats(adapter);
(netdev->features & NETIF_F_HW_CSUM) != 0; for(i = 0; i < E1000_STATS_LEN; i++) {
if (copy_to_user(addr, &edata, sizeof(edata))) char *p = (char *)adapter+e1000_gstrings_stats[i].stat_offset;
return -EFAULT; data[i] = (e1000_gstrings_stats[i].sizeof_stat == sizeof(uint64_t))
return 0; ? *(uint64_t *)p : *(uint32_t *)p;
} }
case ETHTOOL_STXCSUM: { }
struct ethtool_value edata;
if (copy_from_user(&edata, addr, sizeof(edata))) static void
return -EFAULT; e1000_get_strings(struct net_device *netdev, uint32_t stringset, uint8_t *data)
{
int i;
if(adapter->hw.mac_type < e1000_82543) { switch(stringset) {
if (edata.data != 0) case ETH_SS_TEST:
return -EINVAL; memcpy(data, *e1000_gstrings_test,
return 0; E1000_TEST_LEN*ETH_GSTRING_LEN);
break;
case ETH_SS_STATS:
for (i=0; i < E1000_STATS_LEN; i++) {
memcpy(data + i * ETH_GSTRING_LEN,
e1000_gstrings_stats[i].stat_string,
ETH_GSTRING_LEN);
} }
break;
if (edata.data)
netdev->features |= NETIF_F_HW_CSUM;
else
netdev->features &= ~NETIF_F_HW_CSUM;
return 0;
}
case ETHTOOL_GSG: {
struct ethtool_value edata = { ETHTOOL_GSG };
edata.data =
(netdev->features & NETIF_F_SG) != 0;
if (copy_to_user(addr, &edata, sizeof(edata)))
return -EFAULT;
return 0;
} }
case ETHTOOL_SSG: { }
struct ethtool_value edata;
if (copy_from_user(&edata, addr, sizeof(edata)))
return -EFAULT;
if (edata.data)
netdev->features |= NETIF_F_SG;
else
netdev->features &= ~NETIF_F_SG;
return 0; struct ethtool_ops e1000_ethtool_ops = {
} .get_settings = e1000_get_settings,
.set_settings = e1000_set_settings,
.get_drvinfo = e1000_get_drvinfo,
.get_regs_len = e1000_get_regs_len,
.get_regs = e1000_get_regs,
.get_wol = e1000_get_wol,
.set_wol = e1000_set_wol,
.get_msglevel = e1000_get_msglevel,
.set_msglevel = e1000_set_msglevel,
.nway_reset = e1000_nway_reset,
.get_link = e1000_get_link,
.get_eeprom_len = e1000_get_eeprom_len,
.get_eeprom = e1000_get_eeprom,
.set_eeprom = e1000_set_eeprom,
.get_ringparam = e1000_get_ringparam,
.set_ringparam = e1000_set_ringparam,
.get_pauseparam = e1000_get_pauseparam,
.set_pauseparam = e1000_set_pauseparam,
.get_rx_csum = e1000_get_rx_csum,
.set_rx_csum = e1000_set_rx_csum,
.get_tx_csum = e1000_get_tx_csum,
.set_tx_csum = e1000_set_tx_csum,
.get_sg = e1000_get_sg,
.set_sg = e1000_set_sg,
#ifdef NETIF_F_TSO #ifdef NETIF_F_TSO
case ETHTOOL_GTSO: { .get_tso = e1000_get_tso,
struct ethtool_value edata = { ETHTOOL_GTSO }; .set_tso = e1000_set_tso,
edata.data = (netdev->features & NETIF_F_TSO) != 0;
if (copy_to_user(addr, &edata, sizeof(edata)))
return -EFAULT;
return 0;
}
case ETHTOOL_STSO: {
struct ethtool_value edata;
if (copy_from_user(&edata, addr, sizeof(edata)))
return -EFAULT;
if ((adapter->hw.mac_type < e1000_82544) ||
(adapter->hw.mac_type == e1000_82547)) {
if (edata.data != 0)
return -EINVAL;
return 0;
}
if (edata.data)
netdev->features |= NETIF_F_TSO;
else
netdev->features &= ~NETIF_F_TSO;
return 0;
}
#endif #endif
default: .self_test_count = e1000_diag_test_count,
return -EOPNOTSUPP; .self_test = e1000_diag_test,
} .get_strings = e1000_get_strings,
} .phys_id = e1000_phys_id,
.get_stats_count = e1000_get_stats_count,
.get_ethtool_stats = e1000_get_ethtool_stats,
};
void set_ethtool_ops(struct net_device *netdev)
{
SET_ETHTOOL_OPS(netdev, &e1000_ethtool_ops);
}
drivers/net/e1000/e1000_hw.c
View file @ ee86da9d
...@@ -470,7 +470,6 @@ e1000_init_hw(struct e1000_hw *hw) ...@@ -470,7 +470,6 @@ e1000_init_hw(struct e1000_hw *hw)
uint16_t pcix_stat_hi_word; uint16_t pcix_stat_hi_word;
uint16_t cmd_mmrbc; uint16_t cmd_mmrbc;
uint16_t stat_mmrbc; uint16_t stat_mmrbc;
DEBUGFUNC("e1000_init_hw"); DEBUGFUNC("e1000_init_hw");
/* Initialize Identification LED */ /* Initialize Identification LED */
...@@ -910,6 +909,12 @@ e1000_setup_copper_link(struct e1000_hw *hw) ...@@ -910,6 +909,12 @@ e1000_setup_copper_link(struct e1000_hw *hw)
if(ret_val) if(ret_val)
return ret_val; return ret_val;
if(hw->mac_type == e1000_82545_rev_3) {
ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
phy_data |= 0x00000008;
ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
}
if(hw->mac_type <= e1000_82543 || if(hw->mac_type <= e1000_82543 ||
hw->mac_type == e1000_82541 || hw->mac_type == e1000_82547 || hw->mac_type == e1000_82541 || hw->mac_type == e1000_82547 ||
hw->mac_type == e1000_82541_rev_2 || hw->mac_type == e1000_82547_rev_2) hw->mac_type == e1000_82541_rev_2 || hw->mac_type == e1000_82547_rev_2)
...@@ -1961,7 +1966,7 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw) ...@@ -1961,7 +1966,7 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw)
int32_t int32_t
e1000_check_for_link(struct e1000_hw *hw) e1000_check_for_link(struct e1000_hw *hw)
{ {
uint32_t rxcw; uint32_t rxcw = 0;
uint32_t ctrl; uint32_t ctrl;
uint32_t status; uint32_t status;
uint32_t rctl; uint32_t rctl;
...@@ -1971,16 +1976,23 @@ e1000_check_for_link(struct e1000_hw *hw) ...@@ -1971,16 +1976,23 @@ e1000_check_for_link(struct e1000_hw *hw)
DEBUGFUNC("e1000_check_for_link"); DEBUGFUNC("e1000_check_for_link");
ctrl = E1000_READ_REG(hw, CTRL);
status = E1000_READ_REG(hw, STATUS);
/* On adapters with a MAC newer than 82544, SW Defineable pin 1 will be /* On adapters with a MAC newer than 82544, SW Defineable pin 1 will be
* set when the optics detect a signal. On older adapters, it will be * set when the optics detect a signal. On older adapters, it will be
* cleared when there is a signal. This applies to fiber media only. * cleared when there is a signal. This applies to fiber media only.
*/ */
if(hw->media_type == e1000_media_type_fiber) if((hw->media_type == e1000_media_type_fiber) ||
signal = (hw->mac_type > e1000_82544) ? E1000_CTRL_SWDPIN1 : 0; (hw->media_type == e1000_media_type_internal_serdes)) {
rxcw = E1000_READ_REG(hw, RXCW);
ctrl = E1000_READ_REG(hw, CTRL); if(hw->media_type == e1000_media_type_fiber) {
status = E1000_READ_REG(hw, STATUS); signal = (hw->mac_type > e1000_82544) ? E1000_CTRL_SWDPIN1 : 0;
rxcw = E1000_READ_REG(hw, RXCW); if(status & E1000_STATUS_LU)
hw->get_link_status = FALSE;
}
}
/* If we have a copper PHY then we only want to go out to the PHY /* If we have a copper PHY then we only want to go out to the PHY
* registers to see if Auto-Neg has completed and/or if our link * registers to see if Auto-Neg has completed and/or if our link
...@@ -2093,8 +2105,8 @@ e1000_check_for_link(struct e1000_hw *hw) ...@@ -2093,8 +2105,8 @@ e1000_check_for_link(struct e1000_hw *hw)
* in. The autoneg_failed flag does this. * in. The autoneg_failed flag does this.
*/ */
else if((((hw->media_type == e1000_media_type_fiber) && else if((((hw->media_type == e1000_media_type_fiber) &&
((ctrl & E1000_CTRL_SWDPIN1) == signal)) || ((ctrl & E1000_CTRL_SWDPIN1) == signal)) ||
(hw->media_type == e1000_media_type_internal_serdes)) && (hw->media_type == e1000_media_type_internal_serdes)) &&
(!(status & E1000_STATUS_LU)) && (!(status & E1000_STATUS_LU)) &&
(!(rxcw & E1000_RXCW_C))) { (!(rxcw & E1000_RXCW_C))) {
if(hw->autoneg_failed == 0) { if(hw->autoneg_failed == 0) {
...@@ -2125,8 +2137,7 @@ e1000_check_for_link(struct e1000_hw *hw) ...@@ -2125,8 +2137,7 @@ e1000_check_for_link(struct e1000_hw *hw)
*/ */
else if(((hw->media_type == e1000_media_type_fiber) || else if(((hw->media_type == e1000_media_type_fiber) ||
(hw->media_type == e1000_media_type_internal_serdes)) && (hw->media_type == e1000_media_type_internal_serdes)) &&
(ctrl & E1000_CTRL_SLU) && (ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) {
(rxcw & E1000_RXCW_C)) {
DEBUGOUT("RXing /C/, enable AutoNeg and stop forcing link.\r\n"); DEBUGOUT("RXing /C/, enable AutoNeg and stop forcing link.\r\n");
E1000_WRITE_REG(hw, TXCW, hw->txcw); E1000_WRITE_REG(hw, TXCW, hw->txcw);
E1000_WRITE_REG(hw, CTRL, (ctrl & ~E1000_CTRL_SLU)); E1000_WRITE_REG(hw, CTRL, (ctrl & ~E1000_CTRL_SLU));
......
drivers/net/e1000/e1000_hw.h
View file @ ee86da9d
...@@ -2019,7 +2019,7 @@ struct e1000_hw { ...@@ -2019,7 +2019,7 @@ struct e1000_hw {
#define IGP01E1000_PSSR_MDIX_SHIFT 0x000B /* shift right 11 */ #define IGP01E1000_PSSR_MDIX_SHIFT 0x000B /* shift right 11 */
/* IGP01E1000 Specific Port Control Register - R/W */ /* IGP01E1000 Specific Port Control Register - R/W */
#define IGP01E1000_PSCR_TP_LOOPBACK 0x0001 #define IGP01E1000_PSCR_TP_LOOPBACK 0x0010
#define IGP01E1000_PSCR_CORRECT_NC_SCMBLR 0x0200 #define IGP01E1000_PSCR_CORRECT_NC_SCMBLR 0x0200
#define IGP01E1000_PSCR_TEN_CRS_SELECT 0x0400 #define IGP01E1000_PSCR_TEN_CRS_SELECT 0x0400
#define IGP01E1000_PSCR_FLIP_CHIP 0x0800 #define IGP01E1000_PSCR_FLIP_CHIP 0x0800
...@@ -2029,16 +2029,18 @@ struct e1000_hw { ...@@ -2029,16 +2029,18 @@ struct e1000_hw {
/* IGP01E1000 Specific Port Link Health Register */ /* IGP01E1000 Specific Port Link Health Register */
#define IGP01E1000_PLHR_SS_DOWNGRADE 0x8000 #define IGP01E1000_PLHR_SS_DOWNGRADE 0x8000
#define IGP01E1000_PLHR_GIG_SCRAMBLER_ERROR 0x4000 #define IGP01E1000_PLHR_GIG_SCRAMBLER_ERROR 0x4000
#define IGP01E1000_PLHR_MASTER_FAULT 0x2000
#define IGP01E1000_PLHR_MASTER_RESOLUTION 0x1000
#define IGP01E1000_PLHR_GIG_REM_RCVR_NOK 0x0800 /* LH */ #define IGP01E1000_PLHR_GIG_REM_RCVR_NOK 0x0800 /* LH */
#define IGP01E1000_PLHR_IDLE_ERROR_CNT_OFLOW 0x0400 /* LH */ #define IGP01E1000_PLHR_IDLE_ERROR_CNT_OFLOW 0x0400 /* LH */
#define IGP01E1000_PLHR_DATA_ERR_1 0x0200 /* LH */ #define IGP01E1000_PLHR_DATA_ERR_1 0x0200 /* LH */
#define IGP01E1000_PLHR_DATA_ERR_0 0x0100 #define IGP01E1000_PLHR_DATA_ERR_0 0x0100
#define IGP01E1000_PLHR_AUTONEG_FAULT 0x0010 #define IGP01E1000_PLHR_AUTONEG_FAULT 0x0040
#define IGP01E1000_PLHR_AUTONEG_ACTIVE 0x0008 #define IGP01E1000_PLHR_AUTONEG_ACTIVE 0x0010
#define IGP01E1000_PLHR_VALID_CHANNEL_D 0x0004 #define IGP01E1000_PLHR_VALID_CHANNEL_D 0x0008
#define IGP01E1000_PLHR_VALID_CHANNEL_C 0x0002 #define IGP01E1000_PLHR_VALID_CHANNEL_C 0x0004
#define IGP01E1000_PLHR_VALID_CHANNEL_B 0x0001 #define IGP01E1000_PLHR_VALID_CHANNEL_B 0x0002
#define IGP01E1000_PLHR_VALID_CHANNEL_A 0x0000 #define IGP01E1000_PLHR_VALID_CHANNEL_A 0x0001
/* IGP01E1000 Channel Quality Register */ /* IGP01E1000 Channel Quality Register */
#define IGP01E1000_MSE_CHANNEL_D 0x000F #define IGP01E1000_MSE_CHANNEL_D 0x000F
......
drivers/net/e1000/e1000_main.c
View file @ ee86da9d
...@@ -27,55 +27,32 @@ ...@@ -27,55 +27,32 @@
*******************************************************************************/ *******************************************************************************/
#include "e1000.h" #include "e1000.h"
#include <linux/rtnetlink.h>
/* Change Log /* Change Log
* *
* 5.2.51 5/14/04
* o set default configuration to 'NAPI disabled'. NAPI enabled driver
* causes kernel panic when the interface is shutdown while data is being
* transferred.
* 5.2.47 5/04/04
* o fixed ethtool -t implementation
* 5.2.45 4/29/04
* o fixed ethtool -e implementation
* o Support for ethtool ops [Stephen Hemminger (shemminger@osdl.org)]
* 5.2.42 4/26/04
* o Added support for the DPRINTK macro for enhanced error logging. Some
* parts of the patch were supplied by Jon Mason.
* o Move the register_netdevice() donw in the probe routine due to a
* loading/unloading test issue.
* o Added a long RX byte count the the extra ethtool data members for BER
* testing purposes.
* 5.2.39 3/12/04 * 5.2.39 3/12/04
* o Added support to read/write eeprom data in proper order.
* By default device eeprom is always little-endian, word
* addressable
* o Disable TSO as the default for the driver until hangs
* reported against non-IA acrhs can be root-caused.
* o Back out the CSA fix for 82547 as it continues to cause
* systems lock-ups with production systems.
* o Fixed FC high/low water mark values to actually be in the
* range of the Rx FIFO area. It was a math error.
* [Dainis Jonitis (dainis_jonitis@exigengroup.lv)]
* o Handle failure to get new resources when doing ethtool
* ring paramater changes. Previously, driver would free old,
* but fails to allocate new, causing problems. Now, driver
* allocates new, and if sucessful, frees old.
* o Changed collision threshold from 16 to 15 to comply with IEEE
* spec.
* o Toggle chip-select when checking ready status on SPI eeproms.
* o Put PHY into class A mode to pass IEEE tests on some designs.
* Designs with EEPROM word 0x7, bit 15 set will have their PHYs
* set to class A mode, rather than the default class AB.
* o Handle failures of register_netdev. Stephen Hemminger
* [shemminger@osdl.org].
* o updated README & MAN pages, number of Transmit/Receive
* descriptors may be denied depending on system resources.
*
* 5.2.30 1/14/03
* o Set VLAN filtering to IEEE 802.1Q after reset so we don't break
* SoL connections that use VLANs.
* o Allow 1000/Full setting for AutoNeg param for Fiber connections
* Jon D Mason [jonmason@us.ibm.com].
* o Race between Tx queue and Tx clean fixed with a spin lock.
* o Added netpoll support.
* o Fixed endianess bug causing ethtool loopback diags to fail on ppc.
* o Use pdev->irq rather than netdev->irq in preparation for MSI support.
* o Report driver message on user override of InterruptThrottleRate
* module parameter.
* o Change I/O address storage from uint32_t to unsigned long.
* o Added ethtool RINGPARAM support.
*
* 5.2.22 10/15/03
*/ */
char e1000_driver_name[] = "e1000"; char e1000_driver_name[] = "e1000";
char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver"; char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
char e1000_driver_version[] = "5.2.39-k2"; char e1000_driver_version[] = "5.2.52-k2";
char e1000_copyright[] = "Copyright (c) 1999-2004 Intel Corporation."; char e1000_copyright[] = "Copyright (c) 1999-2004 Intel Corporation.";
/* e1000_pci_tbl - PCI Device ID Table /* e1000_pci_tbl - PCI Device ID Table
...@@ -170,6 +147,7 @@ static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter); ...@@ -170,6 +147,7 @@ static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter);
static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd); static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd);
static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
int cmd); int cmd);
void set_ethtool_ops(struct net_device *netdev);
static void e1000_enter_82542_rst(struct e1000_adapter *adapter); static void e1000_enter_82542_rst(struct e1000_adapter *adapter);
static void e1000_leave_82542_rst(struct e1000_adapter *adapter); static void e1000_leave_82542_rst(struct e1000_adapter *adapter);
static inline void e1000_rx_checksum(struct e1000_adapter *adapter, static inline void e1000_rx_checksum(struct e1000_adapter *adapter,
...@@ -206,7 +184,7 @@ struct notifier_block e1000_notifier_reboot = { ...@@ -206,7 +184,7 @@ struct notifier_block e1000_notifier_reboot = {
/* Exported from other modules */ /* Exported from other modules */
extern void e1000_check_options(struct e1000_adapter *adapter); extern void e1000_check_options(struct e1000_adapter *adapter);
extern int e1000_ethtool_ioctl(struct net_device *netdev, struct ifreq *ifr);
static struct pci_driver e1000_driver = { static struct pci_driver e1000_driver = {
.name = e1000_driver_name, .name = e1000_driver_name,
...@@ -224,6 +202,10 @@ MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>"); ...@@ -224,6 +202,10 @@ MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
MODULE_DESCRIPTION("Intel(R) PRO/1000 Network Driver"); MODULE_DESCRIPTION("Intel(R) PRO/1000 Network Driver");
MODULE_LICENSE("GPL"); MODULE_LICENSE("GPL");
static int debug = 3;
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
/** /**
* e1000_init_module - Driver Registration Routine * e1000_init_module - Driver Registration Routine
* *
...@@ -419,6 +401,12 @@ e1000_probe(struct pci_dev *pdev, ...@@ -419,6 +401,12 @@ e1000_probe(struct pci_dev *pdev,
adapter->netdev = netdev; adapter->netdev = netdev;
adapter->pdev = pdev; adapter->pdev = pdev;
adapter->hw.back = adapter; adapter->hw.back = adapter;
adapter->msg_enable = (1 << debug) - 1;
rtnl_lock();
/* we need to set the name early since the DPRINTK macro needs it set */
if (dev_alloc_name(netdev, netdev->name) < 0)
goto err_free_unlock;
mmio_start = pci_resource_start(pdev, BAR_0); mmio_start = pci_resource_start(pdev, BAR_0);
mmio_len = pci_resource_len(pdev, BAR_0); mmio_len = pci_resource_len(pdev, BAR_0);
...@@ -446,6 +434,7 @@ e1000_probe(struct pci_dev *pdev, ...@@ -446,6 +434,7 @@ e1000_probe(struct pci_dev *pdev,
netdev->set_mac_address = &e1000_set_mac; netdev->set_mac_address = &e1000_set_mac;
netdev->change_mtu = &e1000_change_mtu; netdev->change_mtu = &e1000_change_mtu;
netdev->do_ioctl = &e1000_ioctl; netdev->do_ioctl = &e1000_ioctl;
set_ethtool_ops(netdev);
netdev->tx_timeout = &e1000_tx_timeout; netdev->tx_timeout = &e1000_tx_timeout;
netdev->watchdog_timeo = 5 * HZ; netdev->watchdog_timeo = 5 * HZ;
#ifdef CONFIG_E1000_NAPI #ifdef CONFIG_E1000_NAPI
...@@ -502,7 +491,7 @@ e1000_probe(struct pci_dev *pdev, ...@@ -502,7 +491,7 @@ e1000_probe(struct pci_dev *pdev,
/* make sure the EEPROM is good */ /* make sure the EEPROM is good */
if(e1000_validate_eeprom_checksum(&adapter->hw) < 0) { if(e1000_validate_eeprom_checksum(&adapter->hw) < 0) {
printk(KERN_ERR "The EEPROM Checksum Is Not Valid\n"); DPRINTK(PROBE, ERR, "The EEPROM Checksum Is Not Valid\n");
err = -EIO; err = -EIO;
goto err_eeprom; goto err_eeprom;
} }
...@@ -536,16 +525,12 @@ e1000_probe(struct pci_dev *pdev, ...@@ -536,16 +525,12 @@ e1000_probe(struct pci_dev *pdev,
INIT_WORK(&adapter->tx_timeout_task, INIT_WORK(&adapter->tx_timeout_task,
(void (*)(void *))e1000_tx_timeout_task, netdev); (void (*)(void *))e1000_tx_timeout_task, netdev);
if((err = register_netdev(netdev)))
goto err_register;
/* we're going to reset, so assume we have no link for now */ /* we're going to reset, so assume we have no link for now */
netif_carrier_off(netdev); netif_carrier_off(netdev);
netif_stop_queue(netdev); netif_stop_queue(netdev);
printk(KERN_INFO "%s: Intel(R) PRO/1000 Network Connection\n", DPRINTK(PROBE, INFO, "Intel(R) PRO/1000 Network Connection\n");
netdev->name);
e1000_check_options(adapter); e1000_check_options(adapter);
/* Initial Wake on LAN setting /* Initial Wake on LAN setting
...@@ -579,7 +564,12 @@ e1000_probe(struct pci_dev *pdev, ...@@ -579,7 +564,12 @@ e1000_probe(struct pci_dev *pdev,
e1000_reset(adapter); e1000_reset(adapter);
/* since we are holding the rtnl lock already, call the no-lock version */
if((err = register_netdevice(netdev)))
goto err_register;
cards_found++; cards_found++;
rtnl_unlock();
return 0; return 0;
err_register: err_register:
...@@ -587,6 +577,8 @@ e1000_probe(struct pci_dev *pdev, ...@@ -587,6 +577,8 @@ e1000_probe(struct pci_dev *pdev,
err_eeprom: err_eeprom:
iounmap(adapter->hw.hw_addr); iounmap(adapter->hw.hw_addr);
err_ioremap: err_ioremap:
err_free_unlock:
rtnl_unlock();
free_netdev(netdev); free_netdev(netdev);
err_alloc_etherdev: err_alloc_etherdev:
pci_release_regions(pdev); pci_release_regions(pdev);
...@@ -664,7 +656,7 @@ e1000_sw_init(struct e1000_adapter *adapter) ...@@ -664,7 +656,7 @@ e1000_sw_init(struct e1000_adapter *adapter)
/* identify the MAC */ /* identify the MAC */
if (e1000_set_mac_type(hw)) { if (e1000_set_mac_type(hw)) {
E1000_ERR("Unknown MAC Type\n"); DPRINTK(PROBE, ERR, "Unknown MAC Type\n");
return -EIO; return -EIO;
} }
...@@ -1391,9 +1383,8 @@ e1000_watchdog(unsigned long data) ...@@ -1391,9 +1383,8 @@ e1000_watchdog(unsigned long data)
&adapter->link_speed, &adapter->link_speed,
&adapter->link_duplex); &adapter->link_duplex);
printk(KERN_INFO DPRINTK(LINK, INFO, "NIC Link is Up %d Mbps %s\n",
"e1000: %s NIC Link is Up %d Mbps %s\n", adapter->link_speed,
netdev->name, adapter->link_speed,
adapter->link_duplex == FULL_DUPLEX ? adapter->link_duplex == FULL_DUPLEX ?
"Full Duplex" : "Half Duplex"); "Full Duplex" : "Half Duplex");
...@@ -1406,9 +1397,7 @@ e1000_watchdog(unsigned long data) ...@@ -1406,9 +1397,7 @@ e1000_watchdog(unsigned long data)
if(netif_carrier_ok(netdev)) { if(netif_carrier_ok(netdev)) {
adapter->link_speed = 0; adapter->link_speed = 0;
adapter->link_duplex = 0; adapter->link_duplex = 0;
printk(KERN_INFO DPRINTK(LINK, INFO, "NIC Link is Down\n");
"e1000: %s NIC Link is Down\n",
netdev->name);
netif_carrier_off(netdev); netif_carrier_off(netdev);
netif_stop_queue(netdev); netif_stop_queue(netdev);
mod_timer(&adapter->phy_info_timer, jiffies + 2 * HZ); mod_timer(&adapter->phy_info_timer, jiffies + 2 * HZ);
...@@ -1560,33 +1549,17 @@ e1000_tx_csum(struct e1000_adapter *adapter, struct sk_buff *skb) ...@@ -1560,33 +1549,17 @@ e1000_tx_csum(struct e1000_adapter *adapter, struct sk_buff *skb)
static inline int static inline int
e1000_tx_map(struct e1000_adapter *adapter, struct sk_buff *skb, e1000_tx_map(struct e1000_adapter *adapter, struct sk_buff *skb,
unsigned int first) unsigned int first, unsigned int max_per_txd,
unsigned int nr_frags, unsigned int mss)
{ {
struct e1000_desc_ring *tx_ring = &adapter->tx_ring; struct e1000_desc_ring *tx_ring = &adapter->tx_ring;
struct e1000_tx_desc *tx_desc;
struct e1000_buffer *buffer_info; struct e1000_buffer *buffer_info;
unsigned int len = skb->len, max_per_txd = E1000_MAX_DATA_PER_TXD; unsigned int len = skb->len;
unsigned int offset = 0, size, count = 0, i; unsigned int offset = 0, size, count = 0, i;
#ifdef NETIF_F_TSO
unsigned int mss;
#endif
unsigned int nr_frags;
unsigned int f; unsigned int f;
#ifdef NETIF_F_TSO
mss = skb_shinfo(skb)->tso_size;
/* The controller does a simple calculation to
* make sure there is enough room in the FIFO before
* initiating the DMA for each buffer. The calc is:
* 4 = ceil(buffer len/mss). To make sure we don't
* overrun the FIFO, adjust the max buffer len if mss
* drops. */
if(mss)
max_per_txd = min(mss << 2, max_per_txd);
#endif
nr_frags = skb_shinfo(skb)->nr_frags;
len -= skb->data_len; len -= skb->data_len;
i = tx_ring->next_to_use; i = tx_ring->next_to_use;
while(len) { while(len) {
...@@ -1658,46 +1631,6 @@ e1000_tx_map(struct e1000_adapter *adapter, struct sk_buff *skb, ...@@ -1658,46 +1631,6 @@ e1000_tx_map(struct e1000_adapter *adapter, struct sk_buff *skb,
if(++i == tx_ring->count) i = 0; if(++i == tx_ring->count) i = 0;
} }
} }
if(E1000_DESC_UNUSED(&adapter->tx_ring) < count + 2) {
/* There aren't enough descriptors available to queue up
* this send (need: count + 1 context desc + 1 desc gap
* to keep tail from touching head), so undo the mapping
* and abort the send. We could have done the check before
* we mapped the skb, but because of all the workarounds
* (above), it's too difficult to predict how many we're
* going to need.*/
i = tx_ring->next_to_use;
if(i == first) {
/* Cleanup after e1000_tx_[csum|tso] scribbling
* on descriptors. */
tx_desc = E1000_TX_DESC(*tx_ring, first);
tx_desc->buffer_addr = 0;
tx_desc->lower.data = 0;
tx_desc->upper.data = 0;
}
while(count--) {
buffer_info = &tx_ring->buffer_info[i];
if(buffer_info->dma) {
pci_unmap_page(adapter->pdev,
buffer_info->dma,
buffer_info->length,
PCI_DMA_TODEVICE);
buffer_info->dma = 0;
}
if(++i == tx_ring->count) i = 0;
}
tx_ring->next_to_use = first;
return 0;
}
i = (i == 0) ? tx_ring->count - 1 : i - 1; i = (i == 0) ? tx_ring->count - 1 : i - 1;
tx_ring->buffer_info[i].skb = skb; tx_ring->buffer_info[i].skb = skb;
tx_ring->buffer_info[first].next_to_watch = i; tx_ring->buffer_info[first].next_to_watch = i;
...@@ -1792,27 +1725,72 @@ e1000_82547_fifo_workaround(struct e1000_adapter *adapter, struct sk_buff *skb) ...@@ -1792,27 +1725,72 @@ e1000_82547_fifo_workaround(struct e1000_adapter *adapter, struct sk_buff *skb)
return 0; return 0;
} }
#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
static int static int
e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
{ {
struct e1000_adapter *adapter = netdev->priv; struct e1000_adapter *adapter = netdev->priv;
unsigned int first; unsigned int first, max_per_txd = E1000_MAX_DATA_PER_TXD;
unsigned int max_txd_pwr = E1000_MAX_TXD_PWR;
unsigned int tx_flags = 0; unsigned int tx_flags = 0;
unsigned long flags; unsigned long flags;
int count; unsigned int len = skb->len;
int count = 0;
unsigned int mss = 0;
unsigned int nr_frags = 0;
unsigned int f;
nr_frags = skb_shinfo(skb)->nr_frags;
len -= skb->data_len;
if(skb->len <= 0) { if(skb->len <= 0) {
dev_kfree_skb_any(skb); dev_kfree_skb_any(skb);
return 0; return 0;
} }
#ifdef NETIF_F_TSO
mss = skb_shinfo(skb)->tso_size;
/* The controller does a simple calculation to
* make sure there is enough room in the FIFO before
* initiating the DMA for each buffer. The calc is:
* 4 = ceil(buffer len/mss). To make sure we don't
* overrun the FIFO, adjust the max buffer len if mss
* drops. */
if(mss) {
max_per_txd = min(mss << 2, max_per_txd);
max_txd_pwr = fls(max_per_txd) - 1;
}
if((mss) || (skb->ip_summed == CHECKSUM_HW))
count++;
count++; /*for sentinel desc*/
#else
if(skb->ip_summed == CHECKSUM_HW)
count++;
#endif
count += TXD_USE_COUNT(len, max_txd_pwr);
if(adapter->pcix_82544)
count++;
nr_frags = skb_shinfo(skb)->nr_frags;
for(f = 0; f < nr_frags; f++)
count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size,
max_txd_pwr);
if(adapter->pcix_82544)
count += nr_frags;
spin_lock_irqsave(&adapter->tx_lock, flags); spin_lock_irqsave(&adapter->tx_lock, flags);
/* need: count + 2 desc gap to keep tail from touching
* head, otherwise try next time */
if(E1000_DESC_UNUSED(&adapter->tx_ring) < count + 2 ) {
netif_stop_queue(netdev);
spin_unlock_irqrestore(&adapter->tx_lock, flags);
return 1;
}
spin_unlock_irqrestore(&adapter->tx_lock, flags);
if(adapter->hw.mac_type == e1000_82547) { if(adapter->hw.mac_type == e1000_82547) {
if(e1000_82547_fifo_workaround(adapter, skb)) { if(e1000_82547_fifo_workaround(adapter, skb)) {
netif_stop_queue(netdev); netif_stop_queue(netdev);
mod_timer(&adapter->tx_fifo_stall_timer, jiffies); mod_timer(&adapter->tx_fifo_stall_timer, jiffies);
spin_unlock_irqrestore(&adapter->tx_lock, flags);
return 1; return 1;
} }
} }
...@@ -1829,18 +1807,12 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) ...@@ -1829,18 +1807,12 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
else if(e1000_tx_csum(adapter, skb)) else if(e1000_tx_csum(adapter, skb))
tx_flags |= E1000_TX_FLAGS_CSUM; tx_flags |= E1000_TX_FLAGS_CSUM;
if((count = e1000_tx_map(adapter, skb, first))) e1000_tx_queue(adapter,
e1000_tx_queue(adapter, count, tx_flags); e1000_tx_map(adapter, skb, first, max_per_txd, nr_frags, mss),
else { tx_flags);
netif_stop_queue(netdev);
spin_unlock_irqrestore(&adapter->tx_lock, flags);
return 1;
}
netdev->trans_start = jiffies; netdev->trans_start = jiffies;
spin_unlock_irqrestore(&adapter->tx_lock, flags);
return 0; return 0;
} }
...@@ -1903,7 +1875,7 @@ e1000_change_mtu(struct net_device *netdev, int new_mtu) ...@@ -1903,7 +1875,7 @@ e1000_change_mtu(struct net_device *netdev, int new_mtu)
if((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) || if((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) ||
(max_frame > MAX_JUMBO_FRAME_SIZE)) { (max_frame > MAX_JUMBO_FRAME_SIZE)) {
E1000_ERR("Invalid MTU setting\n"); DPRINTK(PROBE, ERR, "Invalid MTU setting\n");
return -EINVAL; return -EINVAL;
} }
...@@ -1911,7 +1883,7 @@ e1000_change_mtu(struct net_device *netdev, int new_mtu) ...@@ -1911,7 +1883,7 @@ e1000_change_mtu(struct net_device *netdev, int new_mtu)
adapter->rx_buffer_len = E1000_RXBUFFER_2048; adapter->rx_buffer_len = E1000_RXBUFFER_2048;
} else if(adapter->hw.mac_type < e1000_82543) { } else if(adapter->hw.mac_type < e1000_82543) {
E1000_ERR("Jumbo Frames not supported on 82542\n"); DPRINTK(PROBE, ERR, "Jumbo Frames not supported on 82542\n");
return -EINVAL; return -EINVAL;
} else if(max_frame <= E1000_RXBUFFER_4096) { } else if(max_frame <= E1000_RXBUFFER_4096) {
...@@ -2193,7 +2165,6 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter) ...@@ -2193,7 +2165,6 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter)
unsigned int i, eop; unsigned int i, eop;
boolean_t cleaned = FALSE; boolean_t cleaned = FALSE;
spin_lock(&adapter->tx_lock);
i = tx_ring->next_to_clean; i = tx_ring->next_to_clean;
eop = tx_ring->buffer_info[i].next_to_watch; eop = tx_ring->buffer_info[i].next_to_watch;
...@@ -2236,6 +2207,8 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter) ...@@ -2236,6 +2207,8 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter)
tx_ring->next_to_clean = i; tx_ring->next_to_clean = i;
spin_lock(&adapter->tx_lock);
if(cleaned && netif_queue_stopped(netdev) && netif_carrier_ok(netdev)) if(cleaned && netif_queue_stopped(netdev) && netif_carrier_ok(netdev))
netif_wake_queue(netdev); netif_wake_queue(netdev);
...@@ -2296,7 +2269,8 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter) ...@@ -2296,7 +2269,8 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter)
/* All receives must fit into a single buffer */ /* All receives must fit into a single buffer */
E1000_DBG("Receive packet consumed multiple buffers\n"); E1000_DBG("%s: Receive packet consumed multiple buffers\n",
netdev->name);
dev_kfree_skb_irq(skb); dev_kfree_skb_irq(skb);
rx_desc->status = 0; rx_desc->status = 0;
...@@ -2513,8 +2487,6 @@ e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) ...@@ -2513,8 +2487,6 @@ e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
case SIOCGMIIREG: case SIOCGMIIREG:
case SIOCSMIIREG: case SIOCSMIIREG:
return e1000_mii_ioctl(netdev, ifr, cmd); return e1000_mii_ioctl(netdev, ifr, cmd);
case SIOCETHTOOL:
return e1000_ethtool_ioctl(netdev, ifr);
default: default:
return -EOPNOTSUPP; return -EOPNOTSUPP;
} }
......
drivers/net/e1000/e1000_param.c
View file @ ee86da9d
...@@ -234,7 +234,8 @@ struct e1000_option { ...@@ -234,7 +234,8 @@ struct e1000_option {
}; };
static int __devinit static int __devinit
e1000_validate_option(int *value, struct e1000_option *opt) e1000_validate_option(int *value, struct e1000_option *opt,
struct e1000_adapter *adapter)
{ {
if(*value == OPTION_UNSET) { if(*value == OPTION_UNSET) {
*value = opt->def; *value = opt->def;
...@@ -245,16 +246,17 @@ e1000_validate_option(int *value, struct e1000_option *opt) ...@@ -245,16 +246,17 @@ e1000_validate_option(int *value, struct e1000_option *opt)
case enable_option: case enable_option:
switch (*value) { switch (*value) {
case OPTION_ENABLED: case OPTION_ENABLED:
printk(KERN_INFO "%s Enabled\n", opt->name); DPRINTK(PROBE, INFO, "%s Enabled\n", opt->name);
return 0; return 0;
case OPTION_DISABLED: case OPTION_DISABLED:
printk(KERN_INFO "%s Disabled\n", opt->name); DPRINTK(PROBE, INFO, "%s Disabled\n", opt->name);
return 0; return 0;
} }
break; break;
case range_option: case range_option:
if(*value >= opt->arg.r.min && *value <= opt->arg.r.max) { if(*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
printk(KERN_INFO "%s set to %i\n", opt->name, *value); DPRINTK(PROBE, INFO,
"%s set to %i\n", opt->name, *value);
return 0; return 0;
} }
break; break;
...@@ -266,7 +268,7 @@ e1000_validate_option(int *value, struct e1000_option *opt) ...@@ -266,7 +268,7 @@ e1000_validate_option(int *value, struct e1000_option *opt)
ent = &opt->arg.l.p[i]; ent = &opt->arg.l.p[i];
if(*value == ent->i) { if(*value == ent->i) {
if(ent->str[0] != '\0') if(ent->str[0] != '\0')
printk(KERN_INFO "%s\n", ent->str); DPRINTK(PROBE, INFO, "%s\n", ent->str);
return 0; return 0;
} }
} }
...@@ -276,7 +278,7 @@ e1000_validate_option(int *value, struct e1000_option *opt) ...@@ -276,7 +278,7 @@ e1000_validate_option(int *value, struct e1000_option *opt)
BUG(); BUG();
} }
printk(KERN_INFO "Invalid %s specified (%i) %s\n", DPRINTK(PROBE, INFO, "Invalid %s specified (%i) %s\n",
opt->name, *value, opt->err); opt->name, *value, opt->err);
*value = opt->def; *value = opt->def;
return -1; return -1;
...@@ -300,9 +302,9 @@ e1000_check_options(struct e1000_adapter *adapter) ...@@ -300,9 +302,9 @@ e1000_check_options(struct e1000_adapter *adapter)
{ {
int bd = adapter->bd_number; int bd = adapter->bd_number;
if(bd >= E1000_MAX_NIC) { if(bd >= E1000_MAX_NIC) {
printk(KERN_NOTICE DPRINTK(PROBE, NOTICE,
"Warning: no configuration for board #%i\n", bd); "Warning: no configuration for board #%i\n", bd);
printk(KERN_NOTICE "Using defaults for all values\n"); DPRINTK(PROBE, NOTICE, "Using defaults for all values\n");
bd = E1000_MAX_NIC; bd = E1000_MAX_NIC;
} }
...@@ -321,7 +323,7 @@ e1000_check_options(struct e1000_adapter *adapter) ...@@ -321,7 +323,7 @@ e1000_check_options(struct e1000_adapter *adapter)
E1000_MAX_TXD : E1000_MAX_82544_TXD; E1000_MAX_TXD : E1000_MAX_82544_TXD;
tx_ring->count = TxDescriptors[bd]; tx_ring->count = TxDescriptors[bd];
e1000_validate_option(&tx_ring->count, &opt); e1000_validate_option(&tx_ring->count, &opt, adapter);
E1000_ROUNDUP(tx_ring->count, REQ_TX_DESCRIPTOR_MULTIPLE); E1000_ROUNDUP(tx_ring->count, REQ_TX_DESCRIPTOR_MULTIPLE);
} }
{ /* Receive Descriptor Count */ { /* Receive Descriptor Count */
...@@ -339,7 +341,7 @@ e1000_check_options(struct e1000_adapter *adapter) ...@@ -339,7 +341,7 @@ e1000_check_options(struct e1000_adapter *adapter)
E1000_MAX_82544_RXD; E1000_MAX_82544_RXD;
rx_ring->count = RxDescriptors[bd]; rx_ring->count = RxDescriptors[bd];
e1000_validate_option(&rx_ring->count, &opt); e1000_validate_option(&rx_ring->count, &opt, adapter);
E1000_ROUNDUP(rx_ring->count, REQ_RX_DESCRIPTOR_MULTIPLE); E1000_ROUNDUP(rx_ring->count, REQ_RX_DESCRIPTOR_MULTIPLE);
} }
{ /* Checksum Offload Enable/Disable */ { /* Checksum Offload Enable/Disable */
...@@ -351,7 +353,7 @@ e1000_check_options(struct e1000_adapter *adapter) ...@@ -351,7 +353,7 @@ e1000_check_options(struct e1000_adapter *adapter)
}; };
int rx_csum = XsumRX[bd]; int rx_csum = XsumRX[bd];
e1000_validate_option(&rx_csum, &opt); e1000_validate_option(&rx_csum, &opt, adapter);
adapter->rx_csum = rx_csum; adapter->rx_csum = rx_csum;
} }
{ /* Flow Control */ { /* Flow Control */
...@@ -373,7 +375,7 @@ e1000_check_options(struct e1000_adapter *adapter) ...@@ -373,7 +375,7 @@ e1000_check_options(struct e1000_adapter *adapter)
}; };
int fc = FlowControl[bd]; int fc = FlowControl[bd];
e1000_validate_option(&fc, &opt); e1000_validate_option(&fc, &opt, adapter);
adapter->hw.fc = adapter->hw.original_fc = fc; adapter->hw.fc = adapter->hw.original_fc = fc;
} }
{ /* Transmit Interrupt Delay */ { /* Transmit Interrupt Delay */
...@@ -387,7 +389,7 @@ e1000_check_options(struct e1000_adapter *adapter) ...@@ -387,7 +389,7 @@ e1000_check_options(struct e1000_adapter *adapter)
}; };
adapter->tx_int_delay = TxIntDelay[bd]; adapter->tx_int_delay = TxIntDelay[bd];
e1000_validate_option(&adapter->tx_int_delay, &opt); e1000_validate_option(&adapter->tx_int_delay, &opt, adapter);
} }
{ /* Transmit Absolute Interrupt Delay */ { /* Transmit Absolute Interrupt Delay */
struct e1000_option opt = { struct e1000_option opt = {
...@@ -400,7 +402,7 @@ e1000_check_options(struct e1000_adapter *adapter) ...@@ -400,7 +402,7 @@ e1000_check_options(struct e1000_adapter *adapter)
}; };
adapter->tx_abs_int_delay = TxAbsIntDelay[bd]; adapter->tx_abs_int_delay = TxAbsIntDelay[bd];
e1000_validate_option(&adapter->tx_abs_int_delay, &opt); e1000_validate_option(&adapter->tx_abs_int_delay, &opt, adapter);
} }
{ /* Receive Interrupt Delay */ { /* Receive Interrupt Delay */
struct e1000_option opt = { struct e1000_option opt = {
...@@ -413,7 +415,7 @@ e1000_check_options(struct e1000_adapter *adapter) ...@@ -413,7 +415,7 @@ e1000_check_options(struct e1000_adapter *adapter)
}; };
adapter->rx_int_delay = RxIntDelay[bd]; adapter->rx_int_delay = RxIntDelay[bd];
e1000_validate_option(&adapter->rx_int_delay, &opt); e1000_validate_option(&adapter->rx_int_delay, &opt, adapter);
} }
{ /* Receive Absolute Interrupt Delay */ { /* Receive Absolute Interrupt Delay */
struct e1000_option opt = { struct e1000_option opt = {
...@@ -426,7 +428,7 @@ e1000_check_options(struct e1000_adapter *adapter) ...@@ -426,7 +428,7 @@ e1000_check_options(struct e1000_adapter *adapter)
}; };
adapter->rx_abs_int_delay = RxAbsIntDelay[bd]; adapter->rx_abs_int_delay = RxAbsIntDelay[bd];
e1000_validate_option(&adapter->rx_abs_int_delay, &opt); e1000_validate_option(&adapter->rx_abs_int_delay, &opt, adapter);
} }
{ /* Interrupt Throttling Rate */ { /* Interrupt Throttling Rate */
struct e1000_option opt = { struct e1000_option opt = {
...@@ -444,13 +446,14 @@ e1000_check_options(struct e1000_adapter *adapter) ...@@ -444,13 +446,14 @@ e1000_check_options(struct e1000_adapter *adapter)
adapter->itr = 1; adapter->itr = 1;
break; break;
case 0: case 0:
printk(KERN_INFO "%s turned off\n", opt.name); DPRINTK(PROBE, INFO, "%s turned off\n", opt.name);
break; break;
case 1: case 1:
printk(KERN_INFO "%s set to dynamic mode\n", opt.name); DPRINTK(PROBE, INFO,
"%s set to dynamic mode\n", opt.name);
break; break;
default: default:
e1000_validate_option(&adapter->itr, &opt); e1000_validate_option(&adapter->itr, &opt, adapter);
break; break;
} }
} }
...@@ -482,15 +485,15 @@ e1000_check_fiber_options(struct e1000_adapter *adapter) ...@@ -482,15 +485,15 @@ e1000_check_fiber_options(struct e1000_adapter *adapter)
bd = bd > E1000_MAX_NIC ? E1000_MAX_NIC : bd; bd = bd > E1000_MAX_NIC ? E1000_MAX_NIC : bd;
if((Speed[bd] != OPTION_UNSET)) { if((Speed[bd] != OPTION_UNSET)) {
printk(KERN_INFO "Speed not valid for fiber adapters, " DPRINTK(PROBE, INFO, "Speed not valid for fiber adapters, "
"parameter ignored\n"); "parameter ignored\n");
} }
if((Duplex[bd] != OPTION_UNSET)) { if((Duplex[bd] != OPTION_UNSET)) {
printk(KERN_INFO "Duplex not valid for fiber adapters, " DPRINTK(PROBE, INFO, "Duplex not valid for fiber adapters, "
"parameter ignored\n"); "parameter ignored\n");
} }
if((AutoNeg[bd] != OPTION_UNSET) && (AutoNeg[bd] != 0x20)) { if((AutoNeg[bd] != OPTION_UNSET) && (AutoNeg[bd] != 0x20)) {
printk(KERN_INFO "AutoNeg other than Full/1000 is " DPRINTK(PROBE, INFO, "AutoNeg other than Full/1000 is "
"not valid for fiber adapters, parameter ignored\n"); "not valid for fiber adapters, parameter ignored\n");
} }
} }
...@@ -525,7 +528,7 @@ e1000_check_copper_options(struct e1000_adapter *adapter) ...@@ -525,7 +528,7 @@ e1000_check_copper_options(struct e1000_adapter *adapter)
}; };
speed = Speed[bd]; speed = Speed[bd];
e1000_validate_option(&speed, &opt); e1000_validate_option(&speed, &opt, adapter);
} }
{ /* Duplex */ { /* Duplex */
struct e1000_opt_list dplx_list[] = {{ 0, "" }, struct e1000_opt_list dplx_list[] = {{ 0, "" },
...@@ -542,11 +545,11 @@ e1000_check_copper_options(struct e1000_adapter *adapter) ...@@ -542,11 +545,11 @@ e1000_check_copper_options(struct e1000_adapter *adapter)
}; };
dplx = Duplex[bd]; dplx = Duplex[bd];
e1000_validate_option(&dplx, &opt); e1000_validate_option(&dplx, &opt, adapter);
} }
if(AutoNeg[bd] != OPTION_UNSET && (speed != 0 || dplx != 0)) { if(AutoNeg[bd] != OPTION_UNSET && (speed != 0 || dplx != 0)) {
printk(KERN_INFO DPRINTK(PROBE, INFO,
"AutoNeg specified along with Speed or Duplex, " "AutoNeg specified along with Speed or Duplex, "
"parameter ignored\n"); "parameter ignored\n");
adapter->hw.autoneg_advertised = AUTONEG_ADV_DEFAULT; adapter->hw.autoneg_advertised = AUTONEG_ADV_DEFAULT;
...@@ -595,7 +598,7 @@ e1000_check_copper_options(struct e1000_adapter *adapter) ...@@ -595,7 +598,7 @@ e1000_check_copper_options(struct e1000_adapter *adapter)
}; };
int an = AutoNeg[bd]; int an = AutoNeg[bd];
e1000_validate_option(&an, &opt); e1000_validate_option(&an, &opt, adapter);
adapter->hw.autoneg_advertised = an; adapter->hw.autoneg_advertised = an;
} }
...@@ -603,78 +606,85 @@ e1000_check_copper_options(struct e1000_adapter *adapter) ...@@ -603,78 +606,85 @@ e1000_check_copper_options(struct e1000_adapter *adapter)
case 0: case 0:
adapter->hw.autoneg = adapter->fc_autoneg = 1; adapter->hw.autoneg = adapter->fc_autoneg = 1;
if(Speed[bd] != OPTION_UNSET || Duplex[bd] != OPTION_UNSET) if(Speed[bd] != OPTION_UNSET || Duplex[bd] != OPTION_UNSET)
printk(KERN_INFO DPRINTK(PROBE, INFO,
"Speed and duplex autonegotiation enabled\n"); "Speed and duplex autonegotiation enabled\n");
break; break;
case HALF_DUPLEX: case HALF_DUPLEX:
printk(KERN_INFO "Half Duplex specified without Speed\n"); DPRINTK(PROBE, INFO, "Half Duplex specified without Speed\n");
printk(KERN_INFO "Using Autonegotiation at Half Duplex only\n"); DPRINTK(PROBE, INFO,
"Using Autonegotiation at Half Duplex only\n");
adapter->hw.autoneg = adapter->fc_autoneg = 1; adapter->hw.autoneg = adapter->fc_autoneg = 1;
adapter->hw.autoneg_advertised = ADVERTISE_10_HALF | adapter->hw.autoneg_advertised = ADVERTISE_10_HALF |
ADVERTISE_100_HALF; ADVERTISE_100_HALF;
break; break;
case FULL_DUPLEX: case FULL_DUPLEX:
printk(KERN_INFO "Full Duplex specified without Speed\n"); DPRINTK(PROBE, INFO, "Full Duplex specified without Speed\n");
printk(KERN_INFO "Using Autonegotiation at Full Duplex only\n"); DPRINTK(PROBE, INFO,
"Using Autonegotiation at Full Duplex only\n");
adapter->hw.autoneg = adapter->fc_autoneg = 1; adapter->hw.autoneg = adapter->fc_autoneg = 1;
adapter->hw.autoneg_advertised = ADVERTISE_10_FULL | adapter->hw.autoneg_advertised = ADVERTISE_10_FULL |
ADVERTISE_100_FULL | ADVERTISE_100_FULL |
ADVERTISE_1000_FULL; ADVERTISE_1000_FULL;
break; break;
case SPEED_10: case SPEED_10:
printk(KERN_INFO "10 Mbps Speed specified without Duplex\n"); DPRINTK(PROBE, INFO,
printk(KERN_INFO "Using Autonegotiation at 10 Mbps only\n"); "10 Mbps Speed specified without Duplex\n");
DPRINTK(PROBE, INFO, "Using Autonegotiation at 10 Mbps only\n");
adapter->hw.autoneg = adapter->fc_autoneg = 1; adapter->hw.autoneg = adapter->fc_autoneg = 1;
adapter->hw.autoneg_advertised = ADVERTISE_10_HALF | adapter->hw.autoneg_advertised = ADVERTISE_10_HALF |
ADVERTISE_10_FULL; ADVERTISE_10_FULL;
break; break;
case SPEED_10 + HALF_DUPLEX: case SPEED_10 + HALF_DUPLEX:
printk(KERN_INFO "Forcing to 10 Mbps Half Duplex\n"); DPRINTK(PROBE, INFO, "Forcing to 10 Mbps Half Duplex\n");
adapter->hw.autoneg = adapter->fc_autoneg = 0; adapter->hw.autoneg = adapter->fc_autoneg = 0;
adapter->hw.forced_speed_duplex = e1000_10_half; adapter->hw.forced_speed_duplex = e1000_10_half;
adapter->hw.autoneg_advertised = 0; adapter->hw.autoneg_advertised = 0;
break; break;
case SPEED_10 + FULL_DUPLEX: case SPEED_10 + FULL_DUPLEX:
printk(KERN_INFO "Forcing to 10 Mbps Full Duplex\n"); DPRINTK(PROBE, INFO, "Forcing to 10 Mbps Full Duplex\n");
adapter->hw.autoneg = adapter->fc_autoneg = 0; adapter->hw.autoneg = adapter->fc_autoneg = 0;
adapter->hw.forced_speed_duplex = e1000_10_full; adapter->hw.forced_speed_duplex = e1000_10_full;
adapter->hw.autoneg_advertised = 0; adapter->hw.autoneg_advertised = 0;
break; break;
case SPEED_100: case SPEED_100:
printk(KERN_INFO "100 Mbps Speed specified without Duplex\n"); DPRINTK(PROBE, INFO,
printk(KERN_INFO "Using Autonegotiation at 100 Mbps only\n"); "100 Mbps Speed specified without Duplex\n");
DPRINTK(PROBE, INFO,
"Using Autonegotiation at 100 Mbps only\n");
adapter->hw.autoneg = adapter->fc_autoneg = 1; adapter->hw.autoneg = adapter->fc_autoneg = 1;
adapter->hw.autoneg_advertised = ADVERTISE_100_HALF | adapter->hw.autoneg_advertised = ADVERTISE_100_HALF |
ADVERTISE_100_FULL; ADVERTISE_100_FULL;
break; break;
case SPEED_100 + HALF_DUPLEX: case SPEED_100 + HALF_DUPLEX:
printk(KERN_INFO "Forcing to 100 Mbps Half Duplex\n"); DPRINTK(PROBE, INFO, "Forcing to 100 Mbps Half Duplex\n");
adapter->hw.autoneg = adapter->fc_autoneg = 0; adapter->hw.autoneg = adapter->fc_autoneg = 0;
adapter->hw.forced_speed_duplex = e1000_100_half; adapter->hw.forced_speed_duplex = e1000_100_half;
adapter->hw.autoneg_advertised = 0; adapter->hw.autoneg_advertised = 0;
break; break;
case SPEED_100 + FULL_DUPLEX: case SPEED_100 + FULL_DUPLEX:
printk(KERN_INFO "Forcing to 100 Mbps Full Duplex\n"); DPRINTK(PROBE, INFO, "Forcing to 100 Mbps Full Duplex\n");
adapter->hw.autoneg = adapter->fc_autoneg = 0; adapter->hw.autoneg = adapter->fc_autoneg = 0;
adapter->hw.forced_speed_duplex = e1000_100_full; adapter->hw.forced_speed_duplex = e1000_100_full;
adapter->hw.autoneg_advertised = 0; adapter->hw.autoneg_advertised = 0;
break; break;
case SPEED_1000: case SPEED_1000:
printk(KERN_INFO "1000 Mbps Speed specified without Duplex\n"); DPRINTK(PROBE, INFO,
printk(KERN_INFO "1000 Mbps Speed specified without Duplex\n");
DPRINTK(PROBE, INFO,
"Using Autonegotiation at 1000 Mbps Full Duplex only\n"); "Using Autonegotiation at 1000 Mbps Full Duplex only\n");
adapter->hw.autoneg = adapter->fc_autoneg = 1; adapter->hw.autoneg = adapter->fc_autoneg = 1;
adapter->hw.autoneg_advertised = ADVERTISE_1000_FULL; adapter->hw.autoneg_advertised = ADVERTISE_1000_FULL;
break; break;
case SPEED_1000 + HALF_DUPLEX: case SPEED_1000 + HALF_DUPLEX:
printk(KERN_INFO "Half Duplex is not supported at 1000 Mbps\n"); DPRINTK(PROBE, INFO,
printk(KERN_INFO "Half Duplex is not supported at 1000 Mbps\n");
DPRINTK(PROBE, INFO,
"Using Autonegotiation at 1000 Mbps Full Duplex only\n"); "Using Autonegotiation at 1000 Mbps Full Duplex only\n");
adapter->hw.autoneg = adapter->fc_autoneg = 1; adapter->hw.autoneg = adapter->fc_autoneg = 1;
adapter->hw.autoneg_advertised = ADVERTISE_1000_FULL; adapter->hw.autoneg_advertised = ADVERTISE_1000_FULL;
break; break;
case SPEED_1000 + FULL_DUPLEX: case SPEED_1000 + FULL_DUPLEX:
printk(KERN_INFO DPRINTK(PROBE, INFO,
"Using Autonegotiation at 1000 Mbps Full Duplex only\n"); "Using Autonegotiation at 1000 Mbps Full Duplex only\n");
adapter->hw.autoneg = adapter->fc_autoneg = 1; adapter->hw.autoneg = adapter->fc_autoneg = 1;
adapter->hw.autoneg_advertised = ADVERTISE_1000_FULL; adapter->hw.autoneg_advertised = ADVERTISE_1000_FULL;
...@@ -685,7 +695,8 @@ e1000_check_copper_options(struct e1000_adapter *adapter) ...@@ -685,7 +695,8 @@ e1000_check_copper_options(struct e1000_adapter *adapter)
/* Speed, AutoNeg and MDI/MDI-X must all play nice */ /* Speed, AutoNeg and MDI/MDI-X must all play nice */
if (e1000_validate_mdi_setting(&(adapter->hw)) < 0) { if (e1000_validate_mdi_setting(&(adapter->hw)) < 0) {
printk(KERN_INFO "Speed, AutoNeg and MDI-X specifications are " DPRINTK(PROBE, INFO,
"Speed, AutoNeg and MDI-X specifications are "
"incompatible. Setting MDI-X to a compatible value.\n"); "incompatible. Setting MDI-X to a compatible value.\n");
} }
} }
......
drivers/net/ibm_emac/Makefile 0 → 100644
View file @ ee86da9d
#
# Makefile for the IBM PPC4xx EMAC controllers
#
obj-$(CONFIG_IBM_EMAC) += ibm_emac.o
ibm_emac-objs := ibm_emac_mal.o ibm_emac_core.o ibm_emac_phy.o
# Only need this if you want to see additional debug messages
ifeq ($(CONFIG_IBM_EMAC_ERRMSG), y)
ibm_emac-objs += ibm_emac_debug.o
endif
drivers/net/ibm_emac/ibm_emac.h 0 → 100644
View file @ ee86da9d
/*
* ibm_emac.h
*
*
* Armin Kuster akuster@mvista.com
* June, 2002
*
* Copyright 2002 MontaVista Softare Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifndef _IBM_EMAC_H_
#define _IBM_EMAC_H_
/* General defines needed for the driver */
/* Emac */
typedef struct emac_regs {
u32 em0mr0;
u32 em0mr1;
u32 em0tmr0;
u32 em0tmr1;
u32 em0rmr;
u32 em0isr;
u32 em0iser;
u32 em0iahr;
u32 em0ialr;
u32 em0vtpid;
u32 em0vtci;
u32 em0ptr;
u32 em0iaht1;
u32 em0iaht2;
u32 em0iaht3;
u32 em0iaht4;
u32 em0gaht1;
u32 em0gaht2;
u32 em0gaht3;
u32 em0gaht4;
u32 em0lsah;
u32 em0lsal;
u32 em0ipgvr;
u32 em0stacr;
u32 em0trtr;
u32 em0rwmr;
} emac_t;
/* MODE REG 0 */
#define EMAC_M0_RXI 0x80000000
#define EMAC_M0_TXI 0x40000000
#define EMAC_M0_SRST 0x20000000
#define EMAC_M0_TXE 0x10000000
#define EMAC_M0_RXE 0x08000000
#define EMAC_M0_WKE 0x04000000
/* MODE Reg 1 */
#define EMAC_M1_FDE 0x80000000
#define EMAC_M1_ILE 0x40000000
#define EMAC_M1_VLE 0x20000000
#define EMAC_M1_EIFC 0x10000000
#define EMAC_M1_APP 0x08000000
#define EMAC_M1_AEMI 0x02000000
#define EMAC_M1_IST 0x01000000
#define EMAC_M1_MF_1000GPCS 0x00c00000 /* Internal GPCS */
#define EMAC_M1_MF_1000MBPS 0x00800000 /* External GPCS */
#define EMAC_M1_MF_100MBPS 0x00400000
#define EMAC_M1_RFS_16K 0x00280000 /* 000 for 512 byte */
#define EMAC_M1_TR 0x00008000
#ifdef CONFIG_IBM_EMAC4
#define EMAC_M1_RFS_8K 0x00200000
#define EMAC_M1_RFS_4K 0x00180000
#define EMAC_M1_RFS_2K 0x00100000
#define EMAC_M1_RFS_1K 0x00080000
#define EMAC_M1_TX_FIFO_16K 0x00050000 /* 0's for 512 byte */
#define EMAC_M1_TX_FIFO_8K 0x00040000
#define EMAC_M1_TX_FIFO_4K 0x00030000
#define EMAC_M1_TX_FIFO_2K 0x00020000
#define EMAC_M1_TX_FIFO_1K 0x00010000
#define EMAC_M1_TX_TR 0x00008000
#define EMAC_M1_TX_MWSW 0x00001000 /* 0 wait for status */
#define EMAC_M1_JUMBO_ENABLE 0x00000800 /* Upt to 9Kr status */
#define EMAC_M1_OPB_CLK_66 0x00000008 /* 66Mhz */
#define EMAC_M1_OPB_CLK_83 0x00000010 /* 83Mhz */
#define EMAC_M1_OPB_CLK_100 0x00000018 /* 100Mhz */
#define EMAC_M1_OPB_CLK_100P 0x00000020 /* 100Mhz+ */
#else /* CONFIG_IBM_EMAC4 */
#define EMAC_M1_RFS_4K 0x00300000 /* ~4k for 512 byte */
#define EMAC_M1_RFS_2K 0x00200000
#define EMAC_M1_RFS_1K 0x00100000
#define EMAC_M1_TX_FIFO_2K 0x00080000 /* 0's for 512 byte */
#define EMAC_M1_TX_FIFO_1K 0x00040000
#define EMAC_M1_TR0_DEPEND 0x00010000 /* 0'x for single packet */
#define EMAC_M1_TR1_DEPEND 0x00004000
#define EMAC_M1_TR1_MULTI 0x00002000
#define EMAC_M1_JUMBO_ENABLE 0x00001000
#endif /* CONFIG_IBM_EMAC4 */
#define EMAC_M1_BASE (EMAC_M1_TX_FIFO_2K | \
EMAC_M1_APP | \
EMAC_M1_TR)
/* Transmit Mode Register 0 */
#define EMAC_TMR0_GNP0 0x80000000
#define EMAC_TMR0_GNP1 0x40000000
#define EMAC_TMR0_GNPD 0x20000000
#define EMAC_TMR0_FC 0x10000000
#define EMAC_TMR0_TFAE_2_32 0x00000001
#define EMAC_TMR0_TFAE_4_64 0x00000002
#define EMAC_TMR0_TFAE_8_128 0x00000003
#define EMAC_TMR0_TFAE_16_256 0x00000004
#define EMAC_TMR0_TFAE_32_512 0x00000005
#define EMAC_TMR0_TFAE_64_1024 0x00000006
#define EMAC_TMR0_TFAE_128_2048 0x00000007
/* Receive Mode Register */
#define EMAC_RMR_SP 0x80000000
#define EMAC_RMR_SFCS 0x40000000
#define EMAC_RMR_ARRP 0x20000000
#define EMAC_RMR_ARP 0x10000000
#define EMAC_RMR_AROP 0x08000000
#define EMAC_RMR_ARPI 0x04000000
#define EMAC_RMR_PPP 0x02000000
#define EMAC_RMR_PME 0x01000000
#define EMAC_RMR_PMME 0x00800000
#define EMAC_RMR_IAE 0x00400000
#define EMAC_RMR_MIAE 0x00200000
#define EMAC_RMR_BAE 0x00100000
#define EMAC_RMR_MAE 0x00080000
#define EMAC_RMR_RFAF_2_32 0x00000001
#define EMAC_RMR_RFAF_4_64 0x00000002
#define EMAC_RMR_RFAF_8_128 0x00000003
#define EMAC_RMR_RFAF_16_256 0x00000004
#define EMAC_RMR_RFAF_32_512 0x00000005
#define EMAC_RMR_RFAF_64_1024 0x00000006
#define EMAC_RMR_RFAF_128_2048 0x00000007
#define EMAC_RMR_BASE (EMAC_RMR_IAE | EMAC_RMR_BAE)
/* Interrupt Status & enable Regs */
#define EMAC_ISR_OVR 0x02000000
#define EMAC_ISR_PP 0x01000000
#define EMAC_ISR_BP 0x00800000
#define EMAC_ISR_RP 0x00400000
#define EMAC_ISR_SE 0x00200000
#define EMAC_ISR_ALE 0x00100000
#define EMAC_ISR_BFCS 0x00080000
#define EMAC_ISR_PTLE 0x00040000
#define EMAC_ISR_ORE 0x00020000
#define EMAC_ISR_IRE 0x00010000
#define EMAC_ISR_DBDM 0x00000200
#define EMAC_ISR_DB0 0x00000100
#define EMAC_ISR_SE0 0x00000080
#define EMAC_ISR_TE0 0x00000040
#define EMAC_ISR_DB1 0x00000020
#define EMAC_ISR_SE1 0x00000010
#define EMAC_ISR_TE1 0x00000008
#define EMAC_ISR_MOS 0x00000002
#define EMAC_ISR_MOF 0x00000001
/* STA CONTROL REG */
#define EMAC_STACR_OC 0x00008000
#define EMAC_STACR_PHYE 0x00004000
#define EMAC_STACR_WRITE 0x00002000
#define EMAC_STACR_READ 0x00001000
#define EMAC_STACR_CLK_83MHZ 0x00000800 /* 0's for 50Mhz */
#define EMAC_STACR_CLK_66MHZ 0x00000400
#define EMAC_STACR_CLK_100MHZ 0x00000C00
/* Transmit Request Threshold Register */
#define EMAC_TRTR_1600 0x18000000 /* 0's for 64 Bytes */
#define EMAC_TRTR_1024 0x0f000000
#define EMAC_TRTR_512 0x07000000
#define EMAC_TRTR_256 0x03000000
#define EMAC_TRTR_192 0x10000000
#define EMAC_TRTR_128 0x01000000
#define EMAC_TX_CTRL_GFCS 0x0200
#define EMAC_TX_CTRL_GP 0x0100
#define EMAC_TX_CTRL_ISA 0x0080
#define EMAC_TX_CTRL_RSA 0x0040
#define EMAC_TX_CTRL_IVT 0x0020
#define EMAC_TX_CTRL_RVT 0x0010
#define EMAC_TX_CTRL_TAH_CSUM 0x000e /* TAH only */
#define EMAC_TX_CTRL_TAH_SEG4 0x000a /* TAH only */
#define EMAC_TX_CTRL_TAH_SEG3 0x0008 /* TAH only */
#define EMAC_TX_CTRL_TAH_SEG2 0x0006 /* TAH only */
#define EMAC_TX_CTRL_TAH_SEG1 0x0004 /* TAH only */
#define EMAC_TX_CTRL_TAH_SEG0 0x0002 /* TAH only */
#define EMAC_TX_CTRL_TAH_DIS 0x0000 /* TAH only */
#define EMAC_TX_CTRL_DFLT ( \
MAL_TX_CTRL_INTR | EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP )
/* madmal transmit status / Control bits */
#define EMAC_TX_ST_BFCS 0x0200
#define EMAC_TX_ST_BPP 0x0100
#define EMAC_TX_ST_LCS 0x0080
#define EMAC_TX_ST_ED 0x0040
#define EMAC_TX_ST_EC 0x0020
#define EMAC_TX_ST_LC 0x0010
#define EMAC_TX_ST_MC 0x0008
#define EMAC_TX_ST_SC 0x0004
#define EMAC_TX_ST_UR 0x0002
#define EMAC_TX_ST_SQE 0x0001
/* madmal receive status / Control bits */
#define EMAC_RX_ST_OE 0x0200
#define EMAC_RX_ST_PP 0x0100
#define EMAC_RX_ST_BP 0x0080
#define EMAC_RX_ST_RP 0x0040
#define EMAC_RX_ST_SE 0x0020
#define EMAC_RX_ST_AE 0x0010
#define EMAC_RX_ST_BFCS 0x0008
#define EMAC_RX_ST_PTL 0x0004
#define EMAC_RX_ST_ORE 0x0002
#define EMAC_RX_ST_IRE 0x0001
#define EMAC_BAD_RX_PACKET 0x02ff
#define EMAC_CSUM_VER_ERROR 0x0003
/* identify a bad rx packet dependent on emac features */
#ifdef CONFIG_IBM_EMAC4
#define EMAC_IS_BAD_RX_PACKET(desc) \
(((desc & (EMAC_BAD_RX_PACKET & ~EMAC_CSUM_VER_ERROR)) || \
((desc & EMAC_CSUM_VER_ERROR) == EMAC_RX_ST_ORE) || \
((desc & EMAC_CSUM_VER_ERROR) == EMAC_RX_ST_IRE)))
#else
#define EMAC_IS_BAD_RX_PACKET(desc) \
(desc & EMAC_BAD_RX_PACKET)
#endif
/* Revision specific EMAC register defaults */
#ifdef CONFIG_IBM_EMAC4
#define EMAC_M1_DEFAULT (EMAC_M1_BASE | \
EMAC_M1_OPB_CLK_83 | \
EMAC_M1_TX_MWSW)
#define EMAC_RMR_DEFAULT (EMAC_RMR_BASE | \
EMAC_RMR_RFAF_128_2048)
#define EMAC_TMR0_XMIT (EMAC_TMR0_GNP0 | \
EMAC_TMR0_TFAE_128_2048)
#define EMAC_TRTR_DEFAULT EMAC_TRTR_1024
#else /* !CONFIG_IBM_EMAC4 */
#define EMAC_M1_DEFAULT EMAC_M1_BASE
#define EMAC_RMR_DEFAULT EMAC_RMR_BASE
#define EMAC_TMR0_XMIT EMAC_TMR0_GNP0
#define EMAC_TRTR_DEFAULT EMAC_TRTR_1600
#endif /* CONFIG_IBM_EMAC4 */
/* SoC implementation specific EMAC register defaults */
#if defined(CONFIG_440GP)
#define EMAC_RWMR_DEFAULT 0x80009000
#define EMAC_TMR0_DEFAULT 0x00000000
#define EMAC_TMR1_DEFAULT 0xf8640000
#elif defined(CONFIG_440GX)
#define EMAC_RWMR_DEFAULT 0x1000a200
#define EMAC_TMR0_DEFAULT EMAC_TMR0_TFAE_128_2048
#define EMAC_TMR1_DEFAULT 0x88810000
#else
#define EMAC_RWMR_DEFAULT 0x0f002000
#define EMAC_TMR0_DEFAULT 0x00000000
#define EMAC_TMR1_DEFAULT 0x380f0000
#endif /* CONFIG_440GP */
#endif
drivers/net/ibm_emac/ibm_emac_core.c 0 → 100644
View file @ ee86da9d
/*
* ibm_emac_core.c
*
* Ethernet driver for the built in ethernet on the IBM 4xx PowerPC
* processors.
*
* (c) 2003 Benjamin Herrenschmidt <benh@kernel.crashing.org>
*
* Based on original work by
*
* Armin Kuster <akuster@mvista.com>
* Johnnie Peters <jpeters@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
* TODO
* - Check for races in the "remove" code path
* - Add some Power Management to the MAC and the PHY
* - Audit remaining of non-rewritten code (--BenH)
* - Cleanup message display using msglevel mecanism
* - Address all errata
* - Audit all register update paths to ensure they
* are being written post soft reset if required.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/ptrace.h>
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/dma-mapping.h>
#include <linux/ethtool.h>
#include <linux/mii.h>
#include <asm/processor.h>
#include <asm/bitops.h>
#include <asm/io.h>
#include <asm/dma.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
#include <asm/ocp.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/crc32.h>
#include "ibm_emac_core.h"
//#define MDIO_DEBUG(fmt) printk fmt
#define MDIO_DEBUG(fmt)
//#define LINK_DEBUG(fmt) printk fmt
#define LINK_DEBUG(fmt)
//#define PKT_DEBUG(fmt) printk fmt
#define PKT_DEBUG(fmt)
#define DRV_NAME "emac"
#define DRV_VERSION "2.0"
#define DRV_AUTHOR "Benjamin Herrenschmidt <benh@kernel.crashing.org>"
#define DRV_DESC "IBM EMAC Ethernet driver"
/*
* When mdio_idx >= 0, contains a list of emac ocp_devs
* that have had their initialization deferred until the
* common MDIO controller has been initialized.
*/
LIST_HEAD(emac_init_list);
MODULE_AUTHOR(DRV_AUTHOR);
MODULE_DESCRIPTION(DRV_DESC);
MODULE_LICENSE("GPL");
static int skb_res = SKB_RES;
module_param(skb_res, int, 0444);
MODULE_PARM_DESC(skb_res, "Amount of data to reserve on skb buffs\n"
"The 405 handles a misaligned IP header fine but\n"
"this can help if you are routing to a tunnel or a\n"
"device that needs aligned data. 0..2");
#define RGMII_PRIV(ocpdev) ((struct ibm_ocp_rgmii*)ocp_get_drvdata(ocpdev))
static unsigned int rgmii_enable[] =
{ RGMII_RTBI, RGMII_RGMII, RGMII_TBI, RGMII_GMII };
static unsigned int rgmii_speed_mask[] = { 0,
0,
RGMII_MII2_SPDMASK,
RGMII_MII3_SPDMASK
};
static unsigned int rgmii_speed100[] = { 0,
0,
RGMII_MII2_100MB,
RGMII_MII3_100MB
};
static unsigned int rgmii_speed1000[] = { 0,
0,
RGMII_MII2_1000MB,
RGMII_MII3_1000MB
};
#define ZMII_PRIV(ocpdev) ((struct ibm_ocp_zmii*)ocp_get_drvdata(ocpdev))
static unsigned int zmii_enable[][4] = {
{ZMII_SMII0, ZMII_RMII0, ZMII_MII0,
~(ZMII_MDI1 | ZMII_MDI2 | ZMII_MDI3)},
{ZMII_SMII1, ZMII_RMII1, ZMII_MII1,
~(ZMII_MDI0 | ZMII_MDI2 | ZMII_MDI3)},
{ZMII_SMII2, ZMII_RMII2, ZMII_MII2,
~(ZMII_MDI0 | ZMII_MDI1 | ZMII_MDI3)},
{ZMII_SMII3, ZMII_RMII3, ZMII_MII3, ~(ZMII_MDI0 | ZMII_MDI1 | ZMII_MDI2)}
};
static unsigned int mdi_enable[] =
{ ZMII_MDI0, ZMII_MDI1, ZMII_MDI2, ZMII_MDI3 };
static unsigned int zmii_speed = 0x0;
static unsigned int zmii_speed100[] = { ZMII_MII0_100MB, ZMII_MII1_100MB };
/* Since multiple EMACs share MDIO lines in various ways, we need
* to avoid re-using the same PHY ID in cases where the arch didn't
* setup precise phy_map entries
*/
static u32 busy_phy_map = 0;
/* If EMACs share a common MDIO device, this points to it */
static struct net_device *mdio_ndev = NULL;
struct emac_def_dev {
struct list_head link;
struct ocp_device *ocpdev;
struct ibm_ocp_mal *mal;
};
static struct net_device_stats *emac_stats(struct net_device *dev)
{
struct ocp_enet_private *fep = dev->priv;
return &fep->stats;
};
static int
emac_init_rgmii(struct ocp_device *rgmii_dev, int input, int phy_mode)
{
struct ibm_ocp_rgmii *rgmii = RGMII_PRIV(rgmii_dev);
const char *mode_name[] = { "RTBI", "RGMII", "TBI", "GMII" };
int mode = -1;
if (!rgmii) {
rgmii = kmalloc(sizeof(struct ibm_ocp_rgmii), GFP_KERNEL);
if (rgmii == NULL) {
printk(KERN_ERR
"rgmii%d: Out of memory allocating RGMII structure!\n",
rgmii_dev->def->index);
return -ENOMEM;
}
memset(rgmii, 0, sizeof(*rgmii));
rgmii->base =
(struct rgmii_regs *)ioremap(rgmii_dev->def->paddr,
sizeof(*rgmii->base));
if (rgmii->base == NULL) {
printk(KERN_ERR
"rgmii%d: Cannot ioremap bridge registers!\n",
rgmii_dev->def->index);
kfree(rgmii);
return -ENOMEM;
}
ocp_set_drvdata(rgmii_dev, rgmii);
}
if (phy_mode) {
switch (phy_mode) {
case PHY_MODE_GMII:
mode = GMII;
break;
case PHY_MODE_TBI:
mode = TBI;
break;
case PHY_MODE_RTBI:
mode = RTBI;
break;
case PHY_MODE_RGMII:
default:
mode = RGMII;
}
rgmii->base->fer &= ~RGMII_FER_MASK(input);
rgmii->base->fer |= rgmii_enable[mode] << (4 * input);
} else {
switch ((rgmii->base->fer & RGMII_FER_MASK(input)) >> (4 *
input)) {
case RGMII_RTBI:
mode = RTBI;
break;
case RGMII_RGMII:
mode = RGMII;
break;
case RGMII_TBI:
mode = TBI;
break;
case RGMII_GMII:
mode = GMII;
}
}
/* Set mode to RGMII if nothing valid is detected */
if (mode < 0)
mode = RGMII;
printk(KERN_NOTICE "rgmii%d: input %d in %s mode\n",
rgmii_dev->def->index, input, mode_name[mode]);
rgmii->mode[input] = mode;
rgmii->users++;
return 0;
}
static void
emac_rgmii_port_speed(struct ocp_device *ocpdev, int input, int speed)
{
struct ibm_ocp_rgmii *rgmii = RGMII_PRIV(ocpdev);
unsigned int rgmii_speed;
rgmii_speed = in_be32(&rgmii->base->ssr);
rgmii_speed &= ~rgmii_speed_mask[input];
if (speed == 1000)
rgmii_speed |= rgmii_speed1000[input];
else if (speed == 100)
rgmii_speed |= rgmii_speed100[input];
out_be32(&rgmii->base->ssr, rgmii_speed);
}
static void emac_close_rgmii(struct ocp_device *ocpdev)
{
struct ibm_ocp_rgmii *rgmii = RGMII_PRIV(ocpdev);
BUG_ON(!rgmii || rgmii->users == 0);
if (!--rgmii->users) {
ocp_set_drvdata(ocpdev, NULL);
iounmap((void *)rgmii->base);
kfree(rgmii);
}
}
static int emac_init_zmii(struct ocp_device *zmii_dev, int input, int phy_mode)
{
struct ibm_ocp_zmii *zmii = ZMII_PRIV(zmii_dev);
const char *mode_name[] = { "SMII", "RMII", "MII" };
int mode = -1;
if (!zmii) {
zmii = kmalloc(sizeof(struct ibm_ocp_zmii), GFP_KERNEL);
if (zmii == NULL) {
printk(KERN_ERR
"zmii%d: Out of memory allocating ZMII structure!\n",
zmii_dev->def->index);
return -ENOMEM;
}
memset(zmii, 0, sizeof(*zmii));
zmii->base =
(struct zmii_regs *)ioremap(zmii_dev->def->paddr,
sizeof(*zmii->base));
if (zmii->base == NULL) {
printk(KERN_ERR
"zmii%d: Cannot ioremap bridge registers!\n",
zmii_dev->def->index);
kfree(zmii);
return -ENOMEM;
}
ocp_set_drvdata(zmii_dev, zmii);
}
if (phy_mode) {
switch (phy_mode) {
case PHY_MODE_MII:
mode = MII;
break;
case PHY_MODE_RMII:
mode = RMII;
break;
case PHY_MODE_SMII:
default:
mode = SMII;
}
zmii->base->fer &= ~ZMII_FER_MASK(input);
zmii->base->fer |= zmii_enable[input][mode];
} else {
switch ((zmii->base->fer & ZMII_FER_MASK(input)) << (4 * input)) {
case ZMII_MII0:
mode = MII;
break;
case ZMII_RMII0:
mode = RMII;
break;
case ZMII_SMII0:
mode = SMII;
}
}
/* Set mode to SMII if nothing valid is detected */
if (mode < 0)
mode = SMII;
printk(KERN_NOTICE "zmii%d: input %d in %s mode\n",
zmii_dev->def->index, input, mode_name[mode]);
zmii->mode[input] = mode;
zmii->users++;
return 0;
}
static void emac_enable_zmii_port(struct ocp_device *ocpdev, int input)
{
u32 mask;
struct ibm_ocp_zmii *zmii = ZMII_PRIV(ocpdev);
mask = in_be32(&zmii->base->fer);
mask &= zmii_enable[input][MDI]; /* turn all non enabled MDI's off */
mask |= zmii_enable[input][zmii->mode[input]] | mdi_enable[input];
out_be32(&zmii->base->fer, mask);
}
static void
emac_zmii_port_speed(struct ocp_device *ocpdev, int input, int speed)
{
struct ibm_ocp_zmii *zmii = ZMII_PRIV(ocpdev);
if (speed == 100)
zmii_speed |= zmii_speed100[input];
else
zmii_speed &= ~zmii_speed100[input];
out_be32(&zmii->base->ssr, zmii_speed);
}
static void emac_close_zmii(struct ocp_device *ocpdev)
{
struct ibm_ocp_zmii *zmii = ZMII_PRIV(ocpdev);
BUG_ON(!zmii || zmii->users == 0);
if (!--zmii->users) {
ocp_set_drvdata(ocpdev, NULL);
iounmap((void *)zmii->base);
kfree(zmii);
}
}
int emac_phy_read(struct net_device *dev, int mii_id, int reg)
{
uint32_t stacr;
struct ocp_enet_private *fep = dev->priv;
emac_t *emacp = fep->emacp;
MDIO_DEBUG(("%s: phy_read, id: 0x%x, reg: 0x%x\n", dev->name, mii_id,
reg));
/* Enable proper ZMII port */
if (fep->zmii_dev)
emac_enable_zmii_port(fep->zmii_dev, fep->zmii_input);
/* Use the EMAC that has the MDIO port */
if (fep->mdio_dev) {
dev = fep->mdio_dev;
fep = dev->priv;
emacp = fep->emacp;
}
udelay(MDIO_DELAY);
if ((in_be32(&emacp->em0stacr) & EMAC_STACR_OC) == 0) {
printk(KERN_WARNING "%s: PHY read timeout #1!\n", dev->name);
return -1;
}
/* Clear the speed bits and make a read request to the PHY */
stacr = ((EMAC_STACR_READ | (reg & 0x1f)) & ~EMAC_STACR_CLK_100MHZ);
stacr |= ((mii_id & 0x1F) << 5);
out_be32(&emacp->em0stacr, stacr);
udelay(MDIO_DELAY);
stacr = in_be32(&emacp->em0stacr);
if ((stacr & EMAC_STACR_OC) == 0) {
printk(KERN_WARNING "%s: PHY read timeout #2!\n", dev->name);
return -1;
}
/* Check for a read error */
if (stacr & EMAC_STACR_PHYE) {
MDIO_DEBUG(("EMAC MDIO PHY error !\n"));
return -1;
}
MDIO_DEBUG((" -> 0x%x\n", stacr >> 16));
return (stacr >> 16);
}
void emac_phy_write(struct net_device *dev, int mii_id, int reg, int data)
{
uint32_t stacr;
struct ocp_enet_private *fep = dev->priv;
emac_t *emacp = fep->emacp;
MDIO_DEBUG(("%s phy_write, id: 0x%x, reg: 0x%x, data: 0x%x\n",
dev->name, mii_id, reg, data));
/* Enable proper ZMII port */
if (fep->zmii_dev)
emac_enable_zmii_port(fep->zmii_dev, fep->zmii_input);
/* Use the EMAC that has the MDIO port */
if (fep->mdio_dev) {
dev = fep->mdio_dev;
fep = dev->priv;
emacp = fep->emacp;
}
udelay(MDIO_DELAY);
if ((in_be32(&emacp->em0stacr) & EMAC_STACR_OC) == 0) {
printk(KERN_WARNING "%s: PHY write timeout #2!\n", dev->name);
return;
}
/* Clear the speed bits and make a read request to the PHY */
stacr = ((EMAC_STACR_WRITE | (reg & 0x1f)) & ~EMAC_STACR_CLK_100MHZ);
stacr |= ((mii_id & 0x1f) << 5) | ((data & 0xffff) << 16);
out_be32(&emacp->em0stacr, stacr);
udelay(MDIO_DELAY);
if ((in_be32(&emacp->em0stacr) & EMAC_STACR_OC) == 0)
printk(KERN_WARNING "%s: PHY write timeout #2!\n", dev->name);
/* Check for a write error */
if ((stacr & EMAC_STACR_PHYE) != 0) {
MDIO_DEBUG(("EMAC MDIO PHY error !\n"));
}
}
static void emac_txeob_dev(void *param, u32 chanmask)
{
struct net_device *dev = param;
struct ocp_enet_private *fep = dev->priv;
unsigned long flags;
spin_lock_irqsave(&fep->lock, flags);
PKT_DEBUG(("emac_txeob_dev() entry, tx_cnt: %d\n", fep->tx_cnt));
while (fep->tx_cnt &&
!(fep->tx_desc[fep->ack_slot].ctrl & MAL_TX_CTRL_READY)) {
if (fep->tx_desc[fep->ack_slot].ctrl & MAL_TX_CTRL_LAST) {
/* Tell the system the transmit completed. */
dma_unmap_single(&fep->ocpdev->dev,
fep->tx_desc[fep->ack_slot].data_ptr,
fep->tx_desc[fep->ack_slot].data_len,
DMA_TO_DEVICE);
dev_kfree_skb_irq(fep->tx_skb[fep->ack_slot]);
if (fep->tx_desc[fep->ack_slot].ctrl &
(EMAC_TX_ST_EC | EMAC_TX_ST_MC | EMAC_TX_ST_SC))
fep->stats.collisions++;
}
fep->tx_skb[fep->ack_slot] = (struct sk_buff *)NULL;
if (++fep->ack_slot == NUM_TX_BUFF)
fep->ack_slot = 0;
fep->tx_cnt--;
}
if (fep->tx_cnt < NUM_TX_BUFF)
netif_wake_queue(dev);
PKT_DEBUG(("emac_txeob_dev() exit, tx_cnt: %d\n", fep->tx_cnt));
spin_unlock_irqrestore(&fep->lock, flags);
}
/*
Fill/Re-fill the rx chain with valid ctrl/ptrs.
This function will fill from rx_slot up to the parm end.
So to completely fill the chain pre-set rx_slot to 0 and
pass in an end of 0.
*/
static void emac_rx_fill(struct net_device *dev, int end)
{
int i;
struct ocp_enet_private *fep = dev->priv;
i = fep->rx_slot;
do {
/* We don't want the 16 bytes skb_reserve done by dev_alloc_skb,
* it breaks our cache line alignement. However, we still allocate
* +16 so that we end up allocating the exact same size as
* dev_alloc_skb() would do.
* Also, because of the skb_res, the max DMA size we give to EMAC
* is slighly wrong, causing it to potentially DMA 2 more bytes
* from a broken/oversized packet. These 16 bytes will take care
* that we don't walk on somebody else toes with that.
*/
fep->rx_skb[i] =
alloc_skb(fep->rx_buffer_size + 16, GFP_ATOMIC);
if (fep->rx_skb[i] == NULL) {
/* Keep rx_slot here, the next time clean/fill is called
* we will try again before the MAL wraps back here
* If the MAL tries to use this descriptor with
* the EMPTY bit off it will cause the
* rxde interrupt. That is where we will
* try again to allocate an sk_buff.
*/
break;
}
if (skb_res)
skb_reserve(fep->rx_skb[i], skb_res);
/* We must NOT dma_map_single the cache line right after the
* buffer, so we must crop our sync size to account for the
* reserved space
*/
fep->rx_desc[i].data_ptr =
(unsigned char *)dma_map_single(&fep->ocpdev->dev,
(void *)fep->rx_skb[i]->
data,
fep->rx_buffer_size -
skb_res, DMA_FROM_DEVICE);
/*
* Some 4xx implementations use the previously
* reserved bits in data_len to encode the MS
* 4-bits of a 36-bit physical address (ERPN)
* This must be initialized.
*/
fep->rx_desc[i].data_len = 0;
fep->rx_desc[i].ctrl = MAL_RX_CTRL_EMPTY | MAL_RX_CTRL_INTR |
(i == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0);
} while ((i = (i + 1) % NUM_RX_BUFF) != end);
fep->rx_slot = i;
}
static void
emac_rx_csum(struct net_device *dev, unsigned short ctrl, struct sk_buff *skb)
{
struct ocp_enet_private *fep = dev->priv;
/* Exit if interface has no TAH engine */
if (!fep->tah_dev) {
skb->ip_summed = CHECKSUM_NONE;
return;
}
/* Check for TCP/UDP/IP csum error */
if (ctrl & EMAC_CSUM_VER_ERROR) {
/* Let the stack verify checksum errors */
skb->ip_summed = CHECKSUM_NONE;
/* adapter->hw_csum_err++; */
} else {
/* Csum is good */
skb->ip_summed = CHECKSUM_UNNECESSARY;
/* adapter->hw_csum_good++; */
}
}
static int emac_rx_clean(struct net_device *dev)
{
int i, b, bnum, buf[6];
int error, frame_length;
struct ocp_enet_private *fep = dev->priv;
unsigned short ctrl;
i = fep->rx_slot;
PKT_DEBUG(("emac_rx_clean() entry, rx_slot: %d\n", fep->rx_slot));
do {
if (fep->rx_skb[i] == NULL)
continue; /*we have already handled the packet but haved failed to alloc */
/*
since rx_desc is in uncached mem we don't keep reading it directly
we pull out a local copy of ctrl and do the checks on the copy.
*/
ctrl = fep->rx_desc[i].ctrl;
if (ctrl & MAL_RX_CTRL_EMPTY)
break; /*we don't have any more ready packets */
if (EMAC_IS_BAD_RX_PACKET(ctrl)) {
fep->stats.rx_errors++;
fep->stats.rx_dropped++;
if (ctrl & EMAC_RX_ST_OE)
fep->stats.rx_fifo_errors++;
if (ctrl & EMAC_RX_ST_AE)
fep->stats.rx_frame_errors++;
if (ctrl & EMAC_RX_ST_BFCS)
fep->stats.rx_crc_errors++;
if (ctrl & (EMAC_RX_ST_RP | EMAC_RX_ST_PTL |
EMAC_RX_ST_ORE | EMAC_RX_ST_IRE))
fep->stats.rx_length_errors++;
} else {
if ((ctrl & (MAL_RX_CTRL_FIRST | MAL_RX_CTRL_LAST)) ==
(MAL_RX_CTRL_FIRST | MAL_RX_CTRL_LAST)) {
/* Single descriptor packet */
emac_rx_csum(dev, ctrl, fep->rx_skb[i]);
/* Send the skb up the chain. */
frame_length = fep->rx_desc[i].data_len - 4;
skb_put(fep->rx_skb[i], frame_length);
fep->rx_skb[i]->dev = dev;
fep->rx_skb[i]->protocol =
eth_type_trans(fep->rx_skb[i], dev);
error = netif_rx(fep->rx_skb[i]);
if ((error == NET_RX_DROP) ||
(error == NET_RX_BAD)) {
fep->stats.rx_dropped++;
} else {
fep->stats.rx_packets++;
fep->stats.rx_bytes += frame_length;
}
fep->rx_skb[i] = NULL;
} else {
/* Multiple descriptor packet */
if (ctrl & MAL_RX_CTRL_FIRST) {
if (fep->rx_desc[(i + 1) % NUM_RX_BUFF].
ctrl & MAL_RX_CTRL_EMPTY)
break;
bnum = 0;
buf[bnum] = i;
++bnum;
continue;
}
if (((ctrl & MAL_RX_CTRL_FIRST) !=
MAL_RX_CTRL_FIRST) &&
((ctrl & MAL_RX_CTRL_LAST) !=
MAL_RX_CTRL_LAST)) {
if (fep->rx_desc[(i + 1) %
NUM_RX_BUFF].ctrl &
MAL_RX_CTRL_EMPTY) {
i = buf[0];
break;
}
buf[bnum] = i;
++bnum;
continue;
}
if (ctrl & MAL_RX_CTRL_LAST) {
buf[bnum] = i;
++bnum;
skb_put(fep->rx_skb[buf[0]],
fep->rx_desc[buf[0]].data_len);
for (b = 1; b < bnum; b++) {
/*
* MAL is braindead, we need
* to copy the remainder
* of the packet from the
* latter descriptor buffers
* to the first skb. Then
* dispose of the source
* skbs.
*
* Once the stack is fixed
* to handle frags on most
* protocols we can generate
* a fragmented skb with
* no copies.
*/
memcpy(fep->rx_skb[buf[0]]->
data +
fep->rx_skb[buf[0]]->len,
fep->rx_skb[buf[b]]->
data,
fep->rx_desc[buf[b]].
data_len);
skb_put(fep->rx_skb[buf[0]],
fep->rx_desc[buf[b]].
data_len);
dma_unmap_single(&fep->ocpdev->
dev,
fep->
rx_desc[buf
[b]].
data_ptr,
fep->
rx_desc[buf
[b]].
data_len,
DMA_FROM_DEVICE);
dev_kfree_skb(fep->
rx_skb[buf[b]]);
}
emac_rx_csum(dev, ctrl,
fep->rx_skb[buf[0]]);
fep->rx_skb[buf[0]]->dev = dev;
fep->rx_skb[buf[0]]->protocol =
eth_type_trans(fep->rx_skb[buf[0]],
dev);
error = netif_rx(fep->rx_skb[buf[0]]);
if ((error == NET_RX_DROP)
|| (error == NET_RX_BAD)) {
fep->stats.rx_dropped++;
} else {
fep->stats.rx_packets++;
fep->stats.rx_bytes +=
fep->rx_skb[buf[0]]->len;
}
for (b = 0; b < bnum; b++)
fep->rx_skb[buf[b]] = NULL;
}
}
}
} while ((i = (i + 1) % NUM_RX_BUFF) != fep->rx_slot);
PKT_DEBUG(("emac_rx_clean() exit, rx_slot: %d\n", fep->rx_slot));
return i;
}
static void emac_rxeob_dev(void *param, u32 chanmask)
{
struct net_device *dev = param;
struct ocp_enet_private *fep = dev->priv;
unsigned long flags;
int n;
spin_lock_irqsave(&fep->lock, flags);
if ((n = emac_rx_clean(dev)) != fep->rx_slot)
emac_rx_fill(dev, n);
spin_unlock_irqrestore(&fep->lock, flags);
}
/*
* This interrupt should never occurr, we don't program
* the MAL for contiunous mode.
*/
static void emac_txde_dev(void *param, u32 chanmask)
{
struct net_device *dev = param;
struct ocp_enet_private *fep = dev->priv;
printk(KERN_WARNING "%s: transmit descriptor error\n", dev->name);
emac_mac_dump(dev);
emac_mal_dump(dev);
/* Reenable the transmit channel */
mal_enable_tx_channels(fep->mal, fep->commac.tx_chan_mask);
}
/*
* This interrupt should be very rare at best. This occurs when
* the hardware has a problem with the receive descriptors. The manual
* states that it occurs when the hardware cannot the receive descriptor
* empty bit is not set. The recovery mechanism will be to
* traverse through the descriptors, handle any that are marked to be
* handled and reinitialize each along the way. At that point the driver
* will be restarted.
*/
static void emac_rxde_dev(void *param, u32 chanmask)
{
struct net_device *dev = param;
struct ocp_enet_private *fep = dev->priv;
unsigned long flags;
if (net_ratelimit()) {
printk(KERN_WARNING "%s: receive descriptor error\n",
fep->ndev->name);
emac_mac_dump(dev);
emac_mal_dump(dev);
emac_desc_dump(dev);
}
/* Disable RX channel */
spin_lock_irqsave(&fep->lock, flags);
mal_disable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
/* For now, charge the error against all emacs */
fep->stats.rx_errors++;
/* so do we have any good packets still? */
emac_rx_clean(dev);
/* When the interface is restarted it resets processing to the
* first descriptor in the table.
*/
fep->rx_slot = 0;
emac_rx_fill(dev, 0);
set_mal_dcrn(fep->mal, DCRN_MALRXEOBISR, fep->commac.rx_chan_mask);
set_mal_dcrn(fep->mal, DCRN_MALRXDEIR, fep->commac.rx_chan_mask);
/* Reenable the receive channels */
mal_enable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
spin_unlock_irqrestore(&fep->lock, flags);
}
static irqreturn_t
emac_mac_irq(int irq, void *dev_instance, struct pt_regs *regs)
{
struct net_device *dev = dev_instance;
struct ocp_enet_private *fep = dev->priv;
emac_t *emacp = fep->emacp;
unsigned long tmp_em0isr;
/* EMAC interrupt */
tmp_em0isr = in_be32(&emacp->em0isr);
if (tmp_em0isr & (EMAC_ISR_TE0 | EMAC_ISR_TE1)) {
/* This error is a hard transmit error - could retransmit */
fep->stats.tx_errors++;
/* Reenable the transmit channel */
mal_enable_tx_channels(fep->mal, fep->commac.tx_chan_mask);
} else {
fep->stats.rx_errors++;
}
if (tmp_em0isr & EMAC_ISR_RP)
fep->stats.rx_length_errors++;
if (tmp_em0isr & EMAC_ISR_ALE)
fep->stats.rx_frame_errors++;
if (tmp_em0isr & EMAC_ISR_BFCS)
fep->stats.rx_crc_errors++;
if (tmp_em0isr & EMAC_ISR_PTLE)
fep->stats.rx_length_errors++;
if (tmp_em0isr & EMAC_ISR_ORE)
fep->stats.rx_length_errors++;
if (tmp_em0isr & EMAC_ISR_TE0)
fep->stats.tx_aborted_errors++;
emac_err_dump(dev, tmp_em0isr);
out_be32(&emacp->em0isr, tmp_em0isr);
return IRQ_HANDLED;
}
static int emac_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
unsigned short ctrl;
unsigned long flags;
struct ocp_enet_private *fep = dev->priv;
emac_t *emacp = fep->emacp;
int len = skb->len;
unsigned int offset = 0, size, f, tx_slot_first;
unsigned int nr_frags = skb_shinfo(skb)->nr_frags;
spin_lock_irqsave(&fep->lock, flags);
len -= skb->data_len;
if ((fep->tx_cnt + nr_frags + len / DESC_BUF_SIZE + 1) > NUM_TX_BUFF) {
PKT_DEBUG(("emac_start_xmit() stopping queue\n"));
netif_stop_queue(dev);
spin_unlock_irqrestore(&fep->lock, flags);
restore_flags(flags);
return -EBUSY;
}
tx_slot_first = fep->tx_slot;
while (len) {
size = min(len, DESC_BUF_SIZE);
fep->tx_desc[fep->tx_slot].data_len = (short)size;
fep->tx_desc[fep->tx_slot].data_ptr =
(unsigned char *)dma_map_single(&fep->ocpdev->dev,
(void *)((unsigned int)skb->
data + offset),
size, DMA_TO_DEVICE);
ctrl = EMAC_TX_CTRL_DFLT;
if (fep->tx_slot != tx_slot_first)
ctrl |= MAL_TX_CTRL_READY;
if ((NUM_TX_BUFF - 1) == fep->tx_slot)
ctrl |= MAL_TX_CTRL_WRAP;
if (!nr_frags && (len == size)) {
ctrl |= MAL_TX_CTRL_LAST;
fep->tx_skb[fep->tx_slot] = skb;
}
if (skb->ip_summed == CHECKSUM_HW)
ctrl |= EMAC_TX_CTRL_TAH_CSUM;
fep->tx_desc[fep->tx_slot].ctrl = ctrl;
len -= size;
offset += size;
/* Bump tx count */
if (++fep->tx_cnt == NUM_TX_BUFF)
netif_stop_queue(dev);
/* Next descriptor */
if (++fep->tx_slot == NUM_TX_BUFF)
fep->tx_slot = 0;
}
for (f = 0; f < nr_frags; f++) {
struct skb_frag_struct *frag;
frag = &skb_shinfo(skb)->frags[f];
len = frag->size;
offset = 0;
while (len) {
size = min(len, DESC_BUF_SIZE);
dma_map_page(&fep->ocpdev->dev,
frag->page,
frag->page_offset + offset,
size, DMA_TO_DEVICE);
ctrl = EMAC_TX_CTRL_DFLT | MAL_TX_CTRL_READY;
if ((NUM_TX_BUFF - 1) == fep->tx_slot)
ctrl |= MAL_TX_CTRL_WRAP;
if ((f == (nr_frags - 1)) && (len == size)) {
ctrl |= MAL_TX_CTRL_LAST;
fep->tx_skb[fep->tx_slot] = skb;
}
if (skb->ip_summed == CHECKSUM_HW)
ctrl |= EMAC_TX_CTRL_TAH_CSUM;
fep->tx_desc[fep->tx_slot].data_len = (short)size;
fep->tx_desc[fep->tx_slot].data_ptr =
(char *)((page_to_pfn(frag->page) << PAGE_SHIFT) +
frag->page_offset + offset);
fep->tx_desc[fep->tx_slot].ctrl = ctrl;
len -= size;
offset += size;
/* Bump tx count */
if (++fep->tx_cnt == NUM_TX_BUFF)
netif_stop_queue(dev);
/* Next descriptor */
if (++fep->tx_slot == NUM_TX_BUFF)
fep->tx_slot = 0;
}
}
/*
* Deferred set READY on first descriptor of packet to
* avoid TX MAL race.
*/
fep->tx_desc[tx_slot_first].ctrl |= MAL_TX_CTRL_READY;
/* Send the packet out. */
out_be32(&emacp->em0tmr0, EMAC_TMR0_XMIT);
fep->stats.tx_packets++;
fep->stats.tx_bytes += skb->len;
PKT_DEBUG(("emac_start_xmit() exitn"));
spin_unlock_irqrestore(&fep->lock, flags);
return 0;
}
static int emac_adjust_to_link(struct ocp_enet_private *fep)
{
emac_t *emacp = fep->emacp;
struct ibm_ocp_rgmii *rgmii;
unsigned long mode_reg;
int full_duplex, speed;
full_duplex = 0;
speed = SPEED_10;
/* set mode register 1 defaults */
mode_reg = EMAC_M1_DEFAULT;
/* Read link mode on PHY */
if (fep->phy_mii.def->ops->read_link(&fep->phy_mii) == 0) {
/* If an error occurred, we don't deal with it yet */
full_duplex = (fep->phy_mii.duplex == DUPLEX_FULL);
speed = fep->phy_mii.speed;
}
if (fep->rgmii_dev)
rgmii = RGMII_PRIV(fep->rgmii_dev);
/* set speed (default is 10Mb) */
switch (speed) {
case SPEED_1000:
mode_reg |= EMAC_M1_JUMBO_ENABLE | EMAC_M1_RFS_16K;
if ((rgmii->mode[fep->rgmii_input] == RTBI)
|| (rgmii->mode[fep->rgmii_input] == TBI))
mode_reg |= EMAC_M1_MF_1000GPCS;
else
mode_reg |= EMAC_M1_MF_1000MBPS;
if (fep->rgmii_dev)
emac_rgmii_port_speed(fep->rgmii_dev, fep->rgmii_input,
1000);
break;
case SPEED_100:
mode_reg |= EMAC_M1_MF_100MBPS | EMAC_M1_RFS_4K;
if (fep->rgmii_dev)
emac_rgmii_port_speed(fep->rgmii_dev, fep->rgmii_input,
100);
if (fep->zmii_dev)
emac_zmii_port_speed(fep->zmii_dev, fep->zmii_input,
100);
break;
case SPEED_10:
default:
mode_reg = (mode_reg & ~EMAC_M1_MF_100MBPS) | EMAC_M1_RFS_4K;
if (fep->rgmii_dev)
emac_rgmii_port_speed(fep->rgmii_dev, fep->rgmii_input,
10);
if (fep->zmii_dev)
emac_zmii_port_speed(fep->zmii_dev, fep->zmii_input,
10);
}
if (full_duplex)
mode_reg |= EMAC_M1_FDE | EMAC_M1_EIFC | EMAC_M1_IST;
else
mode_reg &= ~(EMAC_M1_FDE | EMAC_M1_EIFC | EMAC_M1_ILE);
LINK_DEBUG(("%s: adjust to link, speed: %d, duplex: %d, opened: %d\n",
fep->ndev->name, speed, full_duplex, fep->opened));
printk(KERN_INFO "%s: Speed: %d, %s duplex.\n",
fep->ndev->name, speed, full_duplex ? "Full" : "Half");
if (fep->opened)
out_be32(&emacp->em0mr1, mode_reg);
return 0;
}
static int emac_set_mac_address(struct net_device *ndev, void *p)
{
struct ocp_enet_private *fep = ndev->priv;
emac_t *emacp = fep->emacp;
struct sockaddr *addr = p;
if (!is_valid_ether_addr(addr->sa_data))
return -EADDRNOTAVAIL;
memcpy(ndev->dev_addr, addr->sa_data, ndev->addr_len);
/* set the high address */
out_be32(&emacp->em0iahr,
(fep->ndev->dev_addr[0] << 8) | fep->ndev->dev_addr[1]);
/* set the low address */
out_be32(&emacp->em0ialr,
(fep->ndev->dev_addr[2] << 24) | (fep->ndev->dev_addr[3] << 16)
| (fep->ndev->dev_addr[4] << 8) | fep->ndev->dev_addr[5]);
return 0;
}
static int emac_change_mtu(struct net_device *dev, int new_mtu)
{
struct ocp_enet_private *fep = dev->priv;
int old_mtu = dev->mtu;
emac_t *emacp = fep->emacp;
u32 em0mr0;
int i, full;
unsigned long flags;
if ((new_mtu < EMAC_MIN_MTU) || (new_mtu > EMAC_MAX_MTU)) {
printk(KERN_ERR
"emac: Invalid MTU setting, MTU must be between %d and %d\n",
EMAC_MIN_MTU, EMAC_MAX_MTU);
return -EINVAL;
}
if (old_mtu != new_mtu && netif_running(dev)) {
/* Stop rx engine */
em0mr0 = in_be32(&emacp->em0mr0);
out_be32(&emacp->em0mr0, em0mr0 & ~EMAC_M0_RXE);
/* Wait for descriptors to be empty */
do {
full = 0;
for (i = 0; i < NUM_RX_BUFF; i++)
if (!(fep->rx_desc[i].ctrl & MAL_RX_CTRL_EMPTY)) {
printk(KERN_NOTICE
"emac: RX ring is still full\n");
full = 1;
}
} while (full);
spin_lock_irqsave(&fep->lock, flags);
mal_disable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
/* Destroy all old rx skbs */
for (i = 0; i < NUM_RX_BUFF; i++) {
dma_unmap_single(&fep->ocpdev->dev,
fep->rx_desc[i].data_ptr,
fep->rx_desc[i].data_len,
DMA_FROM_DEVICE);
dev_kfree_skb(fep->rx_skb[i]);
fep->rx_skb[i] = NULL;
}
/* Set new rx_buffer_size and advertise new mtu */
fep->rx_buffer_size =
new_mtu + ENET_HEADER_SIZE + ENET_FCS_SIZE;
dev->mtu = new_mtu;
/* Re-init rx skbs */
fep->rx_slot = 0;
emac_rx_fill(dev, 0);
/* Restart the rx engine */
mal_enable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
out_be32(&emacp->em0mr0, em0mr0 | EMAC_M0_RXE);
spin_unlock_irqrestore(&fep->lock, flags);
}
return 0;
}
static void __emac_set_multicast_list(struct net_device *dev)
{
struct ocp_enet_private *fep = dev->priv;
emac_t *emacp = fep->emacp;
u32 rmr = in_be32(&emacp->em0rmr);
/* First clear all special bits, they can be set later */
rmr &= ~(EMAC_RMR_PME | EMAC_RMR_PMME | EMAC_RMR_MAE);
if (dev->flags & IFF_PROMISC) {
rmr |= EMAC_RMR_PME;
} else if (dev->flags & IFF_ALLMULTI || 32 < dev->mc_count) {
/*
* Must be setting up to use multicast
* Now check for promiscuous multicast
*/
rmr |= EMAC_RMR_PMME;
} else if (dev->flags & IFF_MULTICAST && 0 < dev->mc_count) {
unsigned short em0gaht[4] = { 0, 0, 0, 0 };
struct dev_mc_list *dmi;
/* Need to hash on the multicast address. */
for (dmi = dev->mc_list; dmi; dmi = dmi->next) {
unsigned long mc_crc;
unsigned int bit_number;
mc_crc = ether_crc(6, (char *)dmi->dmi_addr);
bit_number = 63 - (mc_crc >> 26); /* MSB: 0 LSB: 63 */
em0gaht[bit_number >> 4] |=
0x8000 >> (bit_number & 0x0f);
}
emacp->em0gaht1 = em0gaht[0];
emacp->em0gaht2 = em0gaht[1];
emacp->em0gaht3 = em0gaht[2];
emacp->em0gaht4 = em0gaht[3];
/* Turn on multicast addressing */
rmr |= EMAC_RMR_MAE;
}
out_be32(&emacp->em0rmr, rmr);
}
static int emac_init_tah(struct ocp_enet_private *fep)
{
tah_t *tahp;
/* Initialize TAH and enable checksum verification */
tahp = (tah_t *) ioremap(fep->tah_dev->def->paddr, sizeof(*tahp));
if (tahp == NULL) {
printk(KERN_ERR "tah%d: Cannot ioremap TAH registers!\n",
fep->tah_dev->def->index);
return -ENOMEM;
}
out_be32(&tahp->tah_mr, TAH_MR_SR);
/* wait for reset to complete */
while (in_be32(&tahp->tah_mr) & TAH_MR_SR) ;
/* 10KB TAH TX FIFO accomodates the max MTU of 9000 */
out_be32(&tahp->tah_mr,
TAH_MR_CVR | TAH_MR_ST_768 | TAH_MR_TFS_10KB | TAH_MR_DTFP |
TAH_MR_DIG);
iounmap(&tahp);
return 0;
}
static void emac_init_rings(struct net_device *dev)
{
struct ocp_enet_private *ep = dev->priv;
int loop;
ep->tx_desc = (struct mal_descriptor *)((char *)ep->mal->tx_virt_addr +
(ep->mal_tx_chan *
MAL_DT_ALIGN));
ep->rx_desc =
(struct mal_descriptor *)((char *)ep->mal->rx_virt_addr +
(ep->mal_rx_chan * MAL_DT_ALIGN));
/* Fill in the transmit descriptor ring. */
for (loop = 0; loop < NUM_TX_BUFF; loop++) {
if (ep->tx_skb[loop]) {
dma_unmap_single(&ep->ocpdev->dev,
ep->tx_desc[loop].data_ptr,
ep->tx_desc[loop].data_len,
DMA_TO_DEVICE);
dev_kfree_skb_irq(ep->tx_skb[loop]);
}
ep->tx_skb[loop] = NULL;
ep->tx_desc[loop].ctrl = 0;
ep->tx_desc[loop].data_len = 0;
ep->tx_desc[loop].data_ptr = NULL;
}
ep->tx_desc[loop - 1].ctrl |= MAL_TX_CTRL_WRAP;
/* Format the receive descriptor ring. */
ep->rx_slot = 0;
/* Default is MTU=1500 + Ethernet overhead */
ep->rx_buffer_size = ENET_DEF_BUF_SIZE;
emac_rx_fill(dev, 0);
if (ep->rx_slot != 0) {
printk(KERN_ERR
"%s: Not enough mem for RxChain durning Open?\n",
dev->name);
/*We couldn't fill the ring at startup?
*We could clean up and fail to open but right now we will try to
*carry on. It may be a sign of a bad NUM_RX_BUFF value
*/
}
ep->tx_cnt = 0;
ep->tx_slot = 0;
ep->ack_slot = 0;
}
static void emac_reset_configure(struct ocp_enet_private *fep)
{
emac_t *emacp = fep->emacp;
int i;
mal_disable_tx_channels(fep->mal, fep->commac.tx_chan_mask);
mal_disable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
/*
* Check for a link, some PHYs don't provide a clock if
* no link is present. Some EMACs will not come out of
* soft reset without a PHY clock present.
*/
if (fep->phy_mii.def->ops->poll_link(&fep->phy_mii)) {
/* Reset the EMAC */
out_be32(&emacp->em0mr0, EMAC_M0_SRST);
udelay(20);
for (i = 0; i < 100; i++) {
if ((in_be32(&emacp->em0mr0) & EMAC_M0_SRST) == 0)
break;
udelay(10);
}
if (i >= 100) {
printk(KERN_ERR "%s: Cannot reset EMAC\n",
fep->ndev->name);
return;
}
}
/* Switch IRQs off for now */
out_be32(&emacp->em0iser, 0);
/* Configure MAL rx channel */
mal_set_rcbs(fep->mal, fep->mal_rx_chan, DESC_BUF_SIZE_REG);
/* set the high address */
out_be32(&emacp->em0iahr,
(fep->ndev->dev_addr[0] << 8) | fep->ndev->dev_addr[1]);
/* set the low address */
out_be32(&emacp->em0ialr,
(fep->ndev->dev_addr[2] << 24) | (fep->ndev->dev_addr[3] << 16)
| (fep->ndev->dev_addr[4] << 8) | fep->ndev->dev_addr[5]);
/* Adjust to link */
if (netif_carrier_ok(fep->ndev))
emac_adjust_to_link(fep);
/* enable broadcast/individual address and RX FIFO defaults */
out_be32(&emacp->em0rmr, EMAC_RMR_DEFAULT);
/* set transmit request threshold register */
out_be32(&emacp->em0trtr, EMAC_TRTR_DEFAULT);
/* Reconfigure multicast */
__emac_set_multicast_list(fep->ndev);
/* Set receiver/transmitter defaults */
out_be32(&emacp->em0rwmr, EMAC_RWMR_DEFAULT);
out_be32(&emacp->em0tmr0, EMAC_TMR0_DEFAULT);
out_be32(&emacp->em0tmr1, EMAC_TMR1_DEFAULT);
/* set frame gap */
out_be32(&emacp->em0ipgvr, CONFIG_IBM_EMAC_FGAP);
/* Init ring buffers */
emac_init_rings(fep->ndev);
}
static void emac_kick(struct ocp_enet_private *fep)
{
emac_t *emacp = fep->emacp;
unsigned long emac_ier;
emac_ier = EMAC_ISR_PP | EMAC_ISR_BP | EMAC_ISR_RP |
EMAC_ISR_SE | EMAC_ISR_PTLE | EMAC_ISR_ALE |
EMAC_ISR_BFCS | EMAC_ISR_ORE | EMAC_ISR_IRE;
out_be32(&emacp->em0iser, emac_ier);
/* enable all MAL transmit and receive channels */
mal_enable_tx_channels(fep->mal, fep->commac.tx_chan_mask);
mal_enable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
/* set transmit and receive enable */
out_be32(&emacp->em0mr0, EMAC_M0_TXE | EMAC_M0_RXE);
}
static void
emac_start_link(struct ocp_enet_private *fep, struct ethtool_cmd *ep)
{
u32 advertise;
int autoneg;
int forced_speed;
int forced_duplex;
/* Default advertise */
advertise = ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full |
ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full |
ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full;
autoneg = fep->want_autoneg;
forced_speed = fep->phy_mii.speed;
forced_duplex = fep->phy_mii.duplex;
/* Setup link parameters */
if (ep) {
if (ep->autoneg == AUTONEG_ENABLE) {
advertise = ep->advertising;
autoneg = 1;
} else {
autoneg = 0;
forced_speed = ep->speed;
forced_duplex = ep->duplex;
}
}
/* Configure PHY & start aneg */
fep->want_autoneg = autoneg;
if (autoneg) {
LINK_DEBUG(("%s: start link aneg, advertise: 0x%x\n",
fep->ndev->name, advertise));
fep->phy_mii.def->ops->setup_aneg(&fep->phy_mii, advertise);
} else {
LINK_DEBUG(("%s: start link forced, speed: %d, duplex: %d\n",
fep->ndev->name, forced_speed, forced_duplex));
fep->phy_mii.def->ops->setup_forced(&fep->phy_mii, forced_speed,
forced_duplex);
}
fep->timer_ticks = 0;
mod_timer(&fep->link_timer, jiffies + HZ);
}
static void emac_link_timer(unsigned long data)
{
struct ocp_enet_private *fep = (struct ocp_enet_private *)data;
int link;
if (fep->going_away)
return;
spin_lock_irq(&fep->lock);
link = fep->phy_mii.def->ops->poll_link(&fep->phy_mii);
LINK_DEBUG(("%s: poll_link: %d\n", fep->ndev->name, link));
if (link == netif_carrier_ok(fep->ndev)) {
if (!link && fep->want_autoneg && (++fep->timer_ticks) > 10)
emac_start_link(fep, NULL);
goto out;
}
printk(KERN_INFO "%s: Link is %s\n", fep->ndev->name,
link ? "Up" : "Down");
if (link) {
netif_carrier_on(fep->ndev);
/* Chip needs a full reset on config change. That sucks, so I
* should ultimately move that to some tasklet to limit
* latency peaks caused by this code
*/
emac_reset_configure(fep);
if (fep->opened)
emac_kick(fep);
} else {
fep->timer_ticks = 0;
netif_carrier_off(fep->ndev);
}
out:
mod_timer(&fep->link_timer, jiffies + HZ);
spin_unlock_irq(&fep->lock);
}
static void emac_set_multicast_list(struct net_device *dev)
{
struct ocp_enet_private *fep = dev->priv;
spin_lock_irq(&fep->lock);
__emac_set_multicast_list(dev);
spin_unlock_irq(&fep->lock);
}
static int emac_get_settings(struct net_device *ndev, struct ethtool_cmd *cmd)
{
struct ocp_enet_private *fep = ndev->priv;
cmd->supported = fep->phy_mii.def->features;
cmd->port = PORT_MII;
cmd->transceiver = XCVR_EXTERNAL;
cmd->phy_address = fep->mii_phy_addr;
spin_lock_irq(&fep->lock);
cmd->autoneg = fep->want_autoneg;
cmd->speed = fep->phy_mii.speed;
cmd->duplex = fep->phy_mii.duplex;
spin_unlock_irq(&fep->lock);
return 0;
}
static int emac_set_settings(struct net_device *ndev, struct ethtool_cmd *cmd)
{
struct ocp_enet_private *fep = ndev->priv;
unsigned long features = fep->phy_mii.def->features;
if (!capable(CAP_NET_ADMIN))
return -EPERM;
if (cmd->autoneg != AUTONEG_ENABLE && cmd->autoneg != AUTONEG_DISABLE)
return -EINVAL;
if (cmd->autoneg == AUTONEG_ENABLE && cmd->advertising == 0)
return -EINVAL;
if (cmd->duplex != DUPLEX_HALF && cmd->duplex != DUPLEX_FULL)
return -EINVAL;
if (cmd->autoneg == AUTONEG_DISABLE)
switch (cmd->speed) {
case SPEED_10:
if (cmd->duplex == DUPLEX_HALF &&
(features & SUPPORTED_10baseT_Half) == 0)
return -EINVAL;
if (cmd->duplex == DUPLEX_FULL &&
(features & SUPPORTED_10baseT_Full) == 0)
return -EINVAL;
break;
case SPEED_100:
if (cmd->duplex == DUPLEX_HALF &&
(features & SUPPORTED_100baseT_Half) == 0)
return -EINVAL;
if (cmd->duplex == DUPLEX_FULL &&
(features & SUPPORTED_100baseT_Full) == 0)
return -EINVAL;
break;
case SPEED_1000:
if (cmd->duplex == DUPLEX_HALF &&
(features & SUPPORTED_1000baseT_Half) == 0)
return -EINVAL;
if (cmd->duplex == DUPLEX_FULL &&
(features & SUPPORTED_1000baseT_Full) == 0)
return -EINVAL;
break;
default:
return -EINVAL;
} else if ((features & SUPPORTED_Autoneg) == 0)
return -EINVAL;
spin_lock_irq(&fep->lock);
emac_start_link(fep, cmd);
spin_unlock_irq(&fep->lock);
return 0;
}
static void
emac_get_drvinfo(struct net_device *ndev, struct ethtool_drvinfo *info)
{
struct ocp_enet_private *fep = ndev->priv;
strcpy(info->driver, DRV_NAME);
strcpy(info->version, DRV_VERSION);
info->fw_version[0] = '\0';
sprintf(info->bus_info, "IBM EMAC %d", fep->ocpdev->def->index);
info->regdump_len = 0;
}
static int emac_nway_reset(struct net_device *ndev)
{
struct ocp_enet_private *fep = ndev->priv;
if (!fep->want_autoneg)
return -EINVAL;
spin_lock_irq(&fep->lock);
emac_start_link(fep, NULL);
spin_unlock_irq(&fep->lock);
return 0;
}
static u32 emac_get_link(struct net_device *ndev)
{
return netif_carrier_ok(ndev);
}
static struct ethtool_ops emac_ethtool_ops = {
.get_settings = emac_get_settings,
.set_settings = emac_set_settings,
.get_drvinfo = emac_get_drvinfo,
.nway_reset = emac_nway_reset,
.get_link = emac_get_link
};
static int emac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
struct ocp_enet_private *fep = dev->priv;
uint *data = (uint *) & rq->ifr_data;
switch (cmd) {
case SIOCGMIIPHY:
data[0] = fep->mii_phy_addr;
/* Fall through */
case SIOCGMIIREG:
data[3] = emac_phy_read(dev, fep->mii_phy_addr, data[1]);
return 0;
case SIOCSMIIREG:
if (!capable(CAP_NET_ADMIN))
return -EPERM;
emac_phy_write(dev, fep->mii_phy_addr, data[1], data[2]);
return 0;
default:
return -EOPNOTSUPP;
}
}
static int emac_open(struct net_device *dev)
{
struct ocp_enet_private *fep = dev->priv;
int rc;
spin_lock_irq(&fep->lock);
fep->opened = 1;
netif_carrier_off(dev);
/* Reset & configure the chip */
emac_reset_configure(fep);
spin_unlock_irq(&fep->lock);
/* Request our interrupt lines */
rc = request_irq(dev->irq, emac_mac_irq, 0, "IBM EMAC MAC", dev);
if (rc != 0) {
printk("dev->irq %d failed\n", dev->irq);
goto bail;
}
/* Kick the chip rx & tx channels into life */
spin_lock_irq(&fep->lock);
emac_kick(fep);
spin_unlock_irq(&fep->lock);
netif_start_queue(dev);
bail:
return rc;
}
static int emac_close(struct net_device *dev)
{
struct ocp_enet_private *fep = dev->priv;
emac_t *emacp = fep->emacp;
/* XXX Stop IRQ emitting here */
spin_lock_irq(&fep->lock);
fep->opened = 0;
mal_disable_tx_channels(fep->mal, fep->commac.tx_chan_mask);
mal_disable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
netif_carrier_off(dev);
netif_stop_queue(dev);
/*
* Check for a link, some PHYs don't provide a clock if
* no link is present. Some EMACs will not come out of
* soft reset without a PHY clock present.
*/
if (fep->phy_mii.def->ops->poll_link(&fep->phy_mii)) {
out_be32(&emacp->em0mr0, EMAC_M0_SRST);
udelay(10);
if (emacp->em0mr0 & EMAC_M0_SRST) {
/*not sure what to do here hopefully it clears before another open */
printk(KERN_ERR
"%s: Phy SoftReset didn't clear, no link?\n",
dev->name);
}
}
/* Free the irq's */
free_irq(dev->irq, dev);
spin_unlock_irq(&fep->lock);
return 0;
}
static void emac_remove(struct ocp_device *ocpdev)
{
struct net_device *dev = ocp_get_drvdata(ocpdev);
struct ocp_enet_private *ep = dev->priv;
/* FIXME: locking, races, ... */
ep->going_away = 1;
ocp_set_drvdata(ocpdev, NULL);
if (ep->rgmii_dev)
emac_close_rgmii(ep->rgmii_dev);
if (ep->zmii_dev)
emac_close_zmii(ep->zmii_dev);
unregister_netdev(dev);
del_timer_sync(&ep->link_timer);
mal_unregister_commac(ep->mal, &ep->commac);
iounmap((void *)ep->emacp);
kfree(dev);
}
struct mal_commac_ops emac_commac_ops = {
.txeob = &emac_txeob_dev,
.txde = &emac_txde_dev,
.rxeob = &emac_rxeob_dev,
.rxde = &emac_rxde_dev,
};
static int emac_init_device(struct ocp_device *ocpdev, struct ibm_ocp_mal *mal)
{
int deferred_init = 0;
int rc = 0, i;
struct net_device *ndev;
struct ocp_enet_private *ep;
struct ocp_func_emac_data *emacdata;
int commac_reg = 0;
u32 phy_map;
emacdata = (struct ocp_func_emac_data *)ocpdev->def->additions;
if (!emacdata) {
printk(KERN_ERR "emac%d: Missing additional data!\n",
ocpdev->def->index);
return -ENODEV;
}
/* Allocate our net_device structure */
ndev = alloc_etherdev(sizeof(struct ocp_enet_private));
if (ndev == NULL) {
printk(KERN_ERR
"emac%d: Could not allocate ethernet device.\n",
ocpdev->def->index);
return -ENOMEM;
}
ep = ndev->priv;
ep->ndev = ndev;
ep->ocpdev = ocpdev;
ndev->irq = ocpdev->def->irq;
ep->wol_irq = emacdata->wol_irq;
if (emacdata->mdio_idx >= 0) {
if (emacdata->mdio_idx == ocpdev->def->index) {
/* Set the common MDIO net_device */
mdio_ndev = ndev;
deferred_init = 1;
}
ep->mdio_dev = mdio_ndev;
} else {
ep->mdio_dev = ndev;
}
ocp_set_drvdata(ocpdev, ndev);
spin_lock_init(&ep->lock);
/* Fill out MAL informations and register commac */
ep->mal = mal;
ep->mal_tx_chan = emacdata->mal_tx_chan;
ep->mal_rx_chan = emacdata->mal_rx_chan;
ep->commac.ops = &emac_commac_ops;
ep->commac.dev = ndev;
ep->commac.tx_chan_mask = MAL_CHAN_MASK(ep->mal_tx_chan);
ep->commac.rx_chan_mask = MAL_CHAN_MASK(ep->mal_rx_chan);
rc = mal_register_commac(ep->mal, &ep->commac);
if (rc != 0)
goto bail;
commac_reg = 1;
/* Map our MMIOs */
ep->emacp = (emac_t *) ioremap(ocpdev->def->paddr, sizeof(emac_t));
/* Check if we need to attach to a ZMII */
if (emacdata->zmii_idx >= 0) {
ep->zmii_input = emacdata->zmii_mux;
ep->zmii_dev =
ocp_find_device(OCP_ANY_ID, OCP_FUNC_ZMII,
emacdata->zmii_idx);
if (ep->zmii_dev == NULL)
printk(KERN_WARNING
"emac%d: ZMII %d requested but not found !\n",
ocpdev->def->index, emacdata->zmii_idx);
else if ((rc =
emac_init_zmii(ep->zmii_dev, ep->zmii_input,
emacdata->phy_mode)) != 0)
goto bail;
}
/* Check if we need to attach to a RGMII */
if (emacdata->rgmii_idx >= 0) {
ep->rgmii_input = emacdata->rgmii_mux;
ep->rgmii_dev =
ocp_find_device(OCP_ANY_ID, OCP_FUNC_RGMII,
emacdata->rgmii_idx);
if (ep->rgmii_dev == NULL)
printk(KERN_WARNING
"emac%d: RGMII %d requested but not found !\n",
ocpdev->def->index, emacdata->rgmii_idx);
else if ((rc =
emac_init_rgmii(ep->rgmii_dev, ep->rgmii_input,
emacdata->phy_mode)) != 0)
goto bail;
}
/* Check if we need to attach to a TAH */
if (emacdata->tah_idx >= 0) {
ep->tah_dev =
ocp_find_device(OCP_ANY_ID, OCP_FUNC_TAH,
emacdata->tah_idx);
if (ep->tah_dev == NULL)
printk(KERN_WARNING
"emac%d: TAH %d requested but not found !\n",
ocpdev->def->index, emacdata->tah_idx);
else if ((rc = emac_init_tah(ep)) != 0)
goto bail;
}
if (deferred_init) {
if (!list_empty(&emac_init_list)) {
struct list_head *entry;
struct emac_def_dev *ddev;
list_for_each(entry, &emac_init_list) {
ddev =
list_entry(entry, struct emac_def_dev,
link);
emac_init_device(ddev->ocpdev, ddev->mal);
}
}
}
/* Init link monitoring timer */
init_timer(&ep->link_timer);
ep->link_timer.function = emac_link_timer;
ep->link_timer.data = (unsigned long)ep;
ep->timer_ticks = 0;
/* Fill up the mii_phy structure */
ep->phy_mii.dev = ndev;
ep->phy_mii.mdio_read = emac_phy_read;
ep->phy_mii.mdio_write = emac_phy_write;
ep->phy_mii.mode = emacdata->phy_mode;
/* Find PHY */
phy_map = emacdata->phy_map | busy_phy_map;
for (i = 0; i <= 0x1f; i++, phy_map >>= 1) {
if ((phy_map & 0x1) == 0) {
int val = emac_phy_read(ndev, i, MII_BMCR);
if (val != 0xffff && val != -1)
break;
}
}
if (i == 0x20) {
printk(KERN_WARNING "emac%d: Can't find PHY.\n",
ocpdev->def->index);
rc = -ENODEV;
goto bail;
}
busy_phy_map |= 1 << i;
ep->mii_phy_addr = i;
rc = mii_phy_probe(&ep->phy_mii, i);
if (rc) {
printk(KERN_WARNING "emac%d: Failed to probe PHY type.\n",
ocpdev->def->index);
rc = -ENODEV;
goto bail;
}
/* Setup initial PHY config & startup aneg */
if (ep->phy_mii.def->ops->init)
ep->phy_mii.def->ops->init(&ep->phy_mii);
netif_carrier_off(ndev);
if (ep->phy_mii.def->features & SUPPORTED_Autoneg)
ep->want_autoneg = 1;
emac_start_link(ep, NULL);
/* read the MAC Address */
for (i = 0; i < 6; i++)
ndev->dev_addr[i] = emacdata->mac_addr[i];
/* Fill in the driver function table */
ndev->open = &emac_open;
ndev->hard_start_xmit = &emac_start_xmit;
ndev->stop = &emac_close;
ndev->get_stats = &emac_stats;
if (emacdata->jumbo)
ndev->change_mtu = &emac_change_mtu;
ndev->set_mac_address = &emac_set_mac_address;
ndev->set_multicast_list = &emac_set_multicast_list;
ndev->do_ioctl = &emac_ioctl;
SET_ETHTOOL_OPS(ndev, &emac_ethtool_ops);
if (emacdata->tah_idx >= 0)
ndev->features = NETIF_F_IP_CSUM | NETIF_F_SG;
SET_MODULE_OWNER(ndev);
rc = register_netdev(ndev);
if (rc != 0)
goto bail;
printk("%s: IBM emac, MAC %02x:%02x:%02x:%02x:%02x:%02x\n",
ndev->name,
ndev->dev_addr[0], ndev->dev_addr[1], ndev->dev_addr[2],
ndev->dev_addr[3], ndev->dev_addr[4], ndev->dev_addr[5]);
printk(KERN_INFO "%s: Found %s PHY (0x%02x)\n",
ndev->name, ep->phy_mii.def->name, ep->mii_phy_addr);
bail:
if (rc && commac_reg)
mal_unregister_commac(ep->mal, &ep->commac);
if (rc && ndev)
kfree(ndev);
return rc;
}
static int emac_probe(struct ocp_device *ocpdev)
{
struct ocp_device *maldev;
struct ibm_ocp_mal *mal;
struct ocp_func_emac_data *emacdata;
emacdata = (struct ocp_func_emac_data *)ocpdev->def->additions;
if (emacdata == NULL) {
printk(KERN_ERR "emac%d: Missing additional datas !\n",
ocpdev->def->index);
return -ENODEV;
}
/* Get the MAL device */
maldev = ocp_find_device(OCP_ANY_ID, OCP_FUNC_MAL, emacdata->mal_idx);
if (maldev == NULL) {
printk("No maldev\n");
return -ENODEV;
}
/*
* Get MAL driver data, it must be here due to link order.
* When the driver is modularized, symbol dependencies will
* ensure the MAL driver is already present if built as a
* module.
*/
mal = (struct ibm_ocp_mal *)ocp_get_drvdata(maldev);
if (mal == NULL) {
printk("No maldrv\n");
return -ENODEV;
}
/* If we depend on another EMAC for MDIO, wait for it to show up */
if (emacdata->mdio_idx >= 0 &&
(emacdata->mdio_idx != ocpdev->def->index) && !mdio_ndev) {
struct emac_def_dev *ddev;
/* Add this index to the deferred init table */
ddev = kmalloc(sizeof(struct emac_def_dev), GFP_KERNEL);
ddev->ocpdev = ocpdev;
ddev->mal = mal;
list_add_tail(&ddev->link, &emac_init_list);
} else {
emac_init_device(ocpdev, mal);
}
return 0;
}
/* Structure for a device driver */
static struct ocp_device_id emac_ids[] = {
{.vendor = OCP_ANY_ID,.function = OCP_FUNC_EMAC},
{.vendor = OCP_VENDOR_INVALID}
};
static struct ocp_driver emac_driver = {
.name = "emac",
.id_table = emac_ids,
.probe = emac_probe,
.remove = emac_remove,
};
static int __init emac_init(void)
{
int rc;
printk(KERN_INFO DRV_NAME ": " DRV_DESC ", version " DRV_VERSION "\n");
printk(KERN_INFO "Maintained by " DRV_AUTHOR "\n");
if (skb_res > 2) {
printk(KERN_WARNING "Invalid skb_res: %d, cropping to 2\n",
skb_res);
skb_res = 2;
}
rc = ocp_register_driver(&emac_driver);
if (rc < 0) {
ocp_unregister_driver(&emac_driver);
return -ENODEV;
}
return 0;
}
static void __exit emac_exit(void)
{
ocp_unregister_driver(&emac_driver);
}
module_init(emac_init);
module_exit(emac_exit);
drivers/net/ibm_emac/ibm_emac_core.h 0 → 100644
View file @ ee86da9d
/*
* ibm_emac_core.h
*
* Ethernet driver for the built in ethernet on the IBM 405 PowerPC
* processor.
*
* Armin Kuster akuster@mvista.com
* Sept, 2001
*
* Orignial driver
* Johnnie Peters
* jpeters@mvista.com
*
* Copyright 2000 MontaVista Softare Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifndef _IBM_EMAC_CORE_H_
#define _IBM_EMAC_CORE_H_
#include <linux/netdevice.h>
#include <asm/ocp.h>
#include <asm/mmu.h> /* For phys_addr_t */
#include "ibm_emac.h"
#include "ibm_emac_phy.h"
#include "ibm_emac_rgmii.h"
#include "ibm_emac_zmii.h"
#include "ibm_emac_mal.h"
#include "ibm_emac_tah.h"
#ifndef CONFIG_IBM_EMAC_TXB
#define NUM_TX_BUFF 64
#define NUM_RX_BUFF 64
#else
#define NUM_TX_BUFF CONFIG_IBM_EMAC_TXB
#define NUM_RX_BUFF CONFIG_IBM_EMAC_RXB
#endif
/* This does 16 byte alignment, exactly what we need.
* The packet length includes FCS, but we don't want to
* include that when passing upstream as it messes up
* bridging applications.
*/
#ifndef CONFIG_IBM_EMAC_SKBRES
#define SKB_RES 2
#else
#define SKB_RES CONFIG_IBM_EMAC_SKBRES
#endif
/* Note about alignement. alloc_skb() returns a cache line
* aligned buffer. However, dev_alloc_skb() will add 16 more
* bytes and "reserve" them, so our buffer will actually end
* on a half cache line. What we do is to use directly
* alloc_skb, allocate 16 more bytes to match the total amount
* allocated by dev_alloc_skb(), but we don't reserve.
*/
#define MAX_NUM_BUF_DESC 255
#define DESC_BUF_SIZE 4080 /* max 4096-16 */
#define DESC_BUF_SIZE_REG (DESC_BUF_SIZE / 16)
/* Transmitter timeout. */
#define TX_TIMEOUT (2*HZ)
/* MDIO latency delay */
#define MDIO_DELAY 50
/* Power managment shift registers */
#define IBM_CPM_EMMII 0 /* Shift value for MII */
#define IBM_CPM_EMRX 1 /* Shift value for recv */
#define IBM_CPM_EMTX 2 /* Shift value for MAC */
#define IBM_CPM_EMAC(x) (((x)>>IBM_CPM_EMMII) | ((x)>>IBM_CPM_EMRX) | ((x)>>IBM_CPM_EMTX))
#define ENET_HEADER_SIZE 14
#define ENET_FCS_SIZE 4
#define ENET_DEF_MTU_SIZE 1500
#define ENET_DEF_BUF_SIZE (ENET_DEF_MTU_SIZE + ENET_HEADER_SIZE + ENET_FCS_SIZE)
#define EMAC_MIN_FRAME 64
#define EMAC_MAX_FRAME 9018
#define EMAC_MIN_MTU (EMAC_MIN_FRAME - ENET_HEADER_SIZE - ENET_FCS_SIZE)
#define EMAC_MAX_MTU (EMAC_MAX_FRAME - ENET_HEADER_SIZE - ENET_FCS_SIZE)
#ifdef CONFIG_IBM_EMAC_ERRMSG
void emac_serr_dump_0(struct net_device *dev);
void emac_serr_dump_1(struct net_device *dev);
void emac_err_dump(struct net_device *dev, int em0isr);
void emac_phy_dump(struct net_device *);
void emac_desc_dump(struct net_device *);
void emac_mac_dump(struct net_device *);
void emac_mal_dump(struct net_device *);
#else
#define emac_serr_dump_0(dev) do { } while (0)
#define emac_serr_dump_1(dev) do { } while (0)
#define emac_err_dump(dev,x) do { } while (0)
#define emac_phy_dump(dev) do { } while (0)
#define emac_desc_dump(dev) do { } while (0)
#define emac_mac_dump(dev) do { } while (0)
#define emac_mal_dump(dev) do { } while (0)
#endif
struct ocp_enet_private {
struct sk_buff *tx_skb[NUM_TX_BUFF];
struct sk_buff *rx_skb[NUM_RX_BUFF];
struct mal_descriptor *tx_desc;
struct mal_descriptor *rx_desc;
struct mal_descriptor *rx_dirty;
struct net_device_stats stats;
int tx_cnt;
int rx_slot;
int dirty_rx;
int tx_slot;
int ack_slot;
int rx_buffer_size;
struct mii_phy phy_mii;
int mii_phy_addr;
int want_autoneg;
int timer_ticks;
struct timer_list link_timer;
struct net_device *mdio_dev;
struct ocp_device *rgmii_dev;
int rgmii_input;
struct ocp_device *zmii_dev;
int zmii_input;
struct ibm_ocp_mal *mal;
int mal_tx_chan, mal_rx_chan;
struct mal_commac commac;
struct ocp_device *tah_dev;
int opened;
int going_away;
int wol_irq;
emac_t *emacp;
struct ocp_device *ocpdev;
struct net_device *ndev;
spinlock_t lock;
};
#endif /* _IBM_EMAC_CORE_H_ */
drivers/net/ibm_emac/ibm_emac_debug.c 0 → 100644
View file @ ee86da9d
/*
* ibm_ocp_debug.c
*
* This has all the debug routines that where in *_enet.c
*
* Armin Kuster akuster@mvista.com
* April , 2002
*
* Copyright 2002 MontaVista Softare Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/netdevice.h>
#include <asm/io.h>
#include "ibm_ocp_mal.h"
#include "ibm_ocp_zmii.h"
#include "ibm_ocp_enet.h"
extern int emac_phy_read(struct net_device *dev, int mii_id, int reg);
void emac_phy_dump(struct net_device *dev)
{
struct ocp_enet_private *fep = dev->priv;
unsigned long i;
uint data;
printk(KERN_DEBUG " Prepare for Phy dump....\n");
for (i = 0; i < 0x1A; i++) {
data = emac_phy_read(dev, fep->mii_phy_addr, i);
printk(KERN_DEBUG "Phy reg 0x%lx ==> %4x\n", i, data);
if (i == 0x07)
i = 0x0f;
}
}
void emac_desc_dump(struct net_device *dev)
{
struct ocp_enet_private *fep = dev->priv;
int curr_slot;
printk(KERN_DEBUG
"dumping the receive descriptors: current slot is %d\n",
fep->rx_slot);
for (curr_slot = 0; curr_slot < NUM_RX_BUFF; curr_slot++) {
printk(KERN_DEBUG
"Desc %02d: status 0x%04x, length %3d, addr 0x%x\n",
curr_slot, fep->rx_desc[curr_slot].ctrl,
fep->rx_desc[curr_slot].data_len,
(unsigned int)fep->rx_desc[curr_slot].data_ptr);
}
}
void emac_mac_dump(struct net_device *dev)
{
struct ocp_enet_private *fep = dev->priv;
volatile emac_t *emacp = fep->emacp;
printk(KERN_DEBUG "EMAC DEBUG ********** \n");
printk(KERN_DEBUG "EMAC_M0 ==> 0x%x\n", in_be32(&emacp->em0mr0));
printk(KERN_DEBUG "EMAC_M1 ==> 0x%x\n", in_be32(&emacp->em0mr1));
printk(KERN_DEBUG "EMAC_TXM0==> 0x%x\n", in_be32(&emacp->em0tmr0));
printk(KERN_DEBUG "EMAC_TXM1==> 0x%x\n", in_be32(&emacp->em0tmr1));
printk(KERN_DEBUG "EMAC_RXM ==> 0x%x\n", in_be32(&emacp->em0rmr));
printk(KERN_DEBUG "EMAC_ISR ==> 0x%x\n", in_be32(&emacp->em0isr));
printk(KERN_DEBUG "EMAC_IER ==> 0x%x\n", in_be32(&emacp->em0iser));
printk(KERN_DEBUG "EMAC_IAH ==> 0x%x\n", in_be32(&emacp->em0iahr));
printk(KERN_DEBUG "EMAC_IAL ==> 0x%x\n", in_be32(&emacp->em0ialr));
printk(KERN_DEBUG "EMAC_VLAN_TPID_REG ==> 0x%x\n",
in_be32(&emacp->em0vtpid));
}
void emac_mal_dump(struct net_device *dev)
{
struct ibm_ocp_mal *mal = ((struct ocp_enet_private *)dev->priv)->mal;
printk(KERN_DEBUG " MAL DEBUG ********** \n");
printk(KERN_DEBUG " MCR ==> 0x%x\n",
(unsigned int)get_mal_dcrn(mal, DCRN_MALCR));
printk(KERN_DEBUG " ESR ==> 0x%x\n",
(unsigned int)get_mal_dcrn(mal, DCRN_MALESR));
printk(KERN_DEBUG " IER ==> 0x%x\n",
(unsigned int)get_mal_dcrn(mal, DCRN_MALIER));
#ifdef CONFIG_40x
printk(KERN_DEBUG " DBR ==> 0x%x\n",
(unsigned int)get_mal_dcrn(mal, DCRN_MALDBR));
#endif /* CONFIG_40x */
printk(KERN_DEBUG " TXCASR ==> 0x%x\n",
(unsigned int)get_mal_dcrn(mal, DCRN_MALTXCASR));
printk(KERN_DEBUG " TXCARR ==> 0x%x\n",
(unsigned int)get_mal_dcrn(mal, DCRN_MALTXCARR));
printk(KERN_DEBUG " TXEOBISR ==> 0x%x\n",
(unsigned int)get_mal_dcrn(mal, DCRN_MALTXEOBISR));
printk(KERN_DEBUG " TXDEIR ==> 0x%x\n",
(unsigned int)get_mal_dcrn(mal, DCRN_MALTXDEIR));
printk(KERN_DEBUG " RXCASR ==> 0x%x\n",
(unsigned int)get_mal_dcrn(mal, DCRN_MALRXCASR));
printk(KERN_DEBUG " RXCARR ==> 0x%x\n",
(unsigned int)get_mal_dcrn(mal, DCRN_MALRXCARR));
printk(KERN_DEBUG " RXEOBISR ==> 0x%x\n",
(unsigned int)get_mal_dcrn(mal, DCRN_MALRXEOBISR));
printk(KERN_DEBUG " RXDEIR ==> 0x%x\n",
(unsigned int)get_mal_dcrn(mal, DCRN_MALRXDEIR));
printk(KERN_DEBUG " TXCTP0R ==> 0x%x\n",
(unsigned int)get_mal_dcrn(mal, DCRN_MALTXCTP0R));
printk(KERN_DEBUG " TXCTP1R ==> 0x%x\n",
(unsigned int)get_mal_dcrn(mal, DCRN_MALTXCTP1R));
printk(KERN_DEBUG " TXCTP2R ==> 0x%x\n",
(unsigned int)get_mal_dcrn(mal, DCRN_MALTXCTP2R));
printk(KERN_DEBUG " TXCTP3R ==> 0x%x\n",
(unsigned int)get_mal_dcrn(mal, DCRN_MALTXCTP3R));
printk(KERN_DEBUG " RXCTP0R ==> 0x%x\n",
(unsigned int)get_mal_dcrn(mal, DCRN_MALRXCTP0R));
printk(KERN_DEBUG " RXCTP1R ==> 0x%x\n",
(unsigned int)get_mal_dcrn(mal, DCRN_MALRXCTP1R));
printk(KERN_DEBUG " RCBS0 ==> 0x%x\n",
(unsigned int)get_mal_dcrn(mal, DCRN_MALRCBS0));
printk(KERN_DEBUG " RCBS1 ==> 0x%x\n",
(unsigned int)get_mal_dcrn(mal, DCRN_MALRCBS1));
}
void emac_serr_dump_0(struct net_device *dev)
{
struct ibm_ocp_mal *mal = ((struct ocp_enet_private *)dev->priv)->mal;
unsigned long int mal_error, plb_error, plb_addr;
mal_error = get_mal_dcrn(mal, DCRN_MALESR);
printk(KERN_DEBUG "ppc405_eth_serr: %s channel %ld \n",
(mal_error & 0x40000000) ? "Receive" :
"Transmit", (mal_error & 0x3e000000) >> 25);
printk(KERN_DEBUG " ----- latched error -----\n");
if (mal_error & MALESR_DE)
printk(KERN_DEBUG " DE: descriptor error\n");
if (mal_error & MALESR_OEN)
printk(KERN_DEBUG " ONE: OPB non-fullword error\n");
if (mal_error & MALESR_OTE)
printk(KERN_DEBUG " OTE: OPB timeout error\n");
if (mal_error & MALESR_OSE)
printk(KERN_DEBUG " OSE: OPB slave error\n");
if (mal_error & MALESR_PEIN) {
plb_error = mfdcr(DCRN_PLB0_BESR);
printk(KERN_DEBUG
" PEIN: PLB error, PLB0_BESR is 0x%x\n",
(unsigned int)plb_error);
plb_addr = mfdcr(DCRN_PLB0_BEAR);
printk(KERN_DEBUG
" PEIN: PLB error, PLB0_BEAR is 0x%x\n",
(unsigned int)plb_addr);
}
}
void emac_serr_dump_1(struct net_device *dev)
{
struct ibm_ocp_mal *mal = ((struct ocp_enet_private *)dev->priv)->mal;
int mal_error = get_mal_dcrn(mal, DCRN_MALESR);
printk(KERN_DEBUG " ----- cumulative errors -----\n");
if (mal_error & MALESR_DEI)
printk(KERN_DEBUG " DEI: descriptor error interrupt\n");
if (mal_error & MALESR_ONEI)
printk(KERN_DEBUG " OPB non-fullword error interrupt\n");
if (mal_error & MALESR_OTEI)
printk(KERN_DEBUG " OTEI: timeout error interrupt\n");
if (mal_error & MALESR_OSEI)
printk(KERN_DEBUG " OSEI: slave error interrupt\n");
if (mal_error & MALESR_PBEI)
printk(KERN_DEBUG " PBEI: PLB bus error interrupt\n");
}
void emac_err_dump(struct net_device *dev, int em0isr)
{
printk(KERN_DEBUG "%s: on-chip ethernet error:\n", dev->name);
if (em0isr & EMAC_ISR_OVR)
printk(KERN_DEBUG " OVR: overrun\n");
if (em0isr & EMAC_ISR_PP)
printk(KERN_DEBUG " PP: control pause packet\n");
if (em0isr & EMAC_ISR_BP)
printk(KERN_DEBUG " BP: packet error\n");
if (em0isr & EMAC_ISR_RP)
printk(KERN_DEBUG " RP: runt packet\n");
if (em0isr & EMAC_ISR_SE)
printk(KERN_DEBUG " SE: short event\n");
if (em0isr & EMAC_ISR_ALE)
printk(KERN_DEBUG " ALE: odd number of nibbles in packet\n");
if (em0isr & EMAC_ISR_BFCS)
printk(KERN_DEBUG " BFCS: bad FCS\n");
if (em0isr & EMAC_ISR_PTLE)
printk(KERN_DEBUG " PTLE: oversized packet\n");
if (em0isr & EMAC_ISR_ORE)
printk(KERN_DEBUG
" ORE: packet length field > max allowed LLC\n");
if (em0isr & EMAC_ISR_IRE)
printk(KERN_DEBUG " IRE: In Range error\n");
if (em0isr & EMAC_ISR_DBDM)
printk(KERN_DEBUG " DBDM: xmit error or SQE\n");
if (em0isr & EMAC_ISR_DB0)
printk(KERN_DEBUG " DB0: xmit error or SQE on TX channel 0\n");
if (em0isr & EMAC_ISR_SE0)
printk(KERN_DEBUG
" SE0: Signal Quality Error test failure from TX channel 0\n");
if (em0isr & EMAC_ISR_TE0)
printk(KERN_DEBUG " TE0: xmit channel 0 aborted\n");
if (em0isr & EMAC_ISR_DB1)
printk(KERN_DEBUG " DB1: xmit error or SQE on TX channel \n");
if (em0isr & EMAC_ISR_SE1)
printk(KERN_DEBUG
" SE1: Signal Quality Error test failure from TX channel 1\n");
if (em0isr & EMAC_ISR_TE1)
printk(KERN_DEBUG " TE1: xmit channel 1 aborted\n");
if (em0isr & EMAC_ISR_MOS)
printk(KERN_DEBUG " MOS\n");
if (em0isr & EMAC_ISR_MOF)
printk(KERN_DEBUG " MOF\n");
emac_mac_dump(dev);
emac_mal_dump(dev);
}
drivers/net/ibm_emac/ibm_emac_mal.c 0 → 100644
View file @ ee86da9d
/*
* ibm_ocp_mal.c
*
* Armin Kuster akuster@mvista.com
* Juen, 2002
*
* Copyright 2002 MontaVista Softare Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/netdevice.h>
#include <linux/init.h>
#include <linux/dma-mapping.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/ocp.h>
#include "ibm_emac_mal.h"
// Locking: Should we share a lock with the client ? The client could provide
// a lock pointer (optionally) in the commac structure... I don't think this is
// really necessary though
/* This lock protects the commac list. On today UP implementations, it's
* really only used as IRQ protection in mal_{register,unregister}_commac()
*/
static rwlock_t mal_list_lock = RW_LOCK_UNLOCKED;
int mal_register_commac(struct ibm_ocp_mal *mal, struct mal_commac *commac)
{
unsigned long flags;
write_lock_irqsave(&mal_list_lock, flags);
/* Don't let multiple commacs claim the same channel */
if ((mal->tx_chan_mask & commac->tx_chan_mask) ||
(mal->rx_chan_mask & commac->rx_chan_mask)) {
write_unlock_irqrestore(&mal_list_lock, flags);
return -EBUSY;
}
mal->tx_chan_mask |= commac->tx_chan_mask;
mal->rx_chan_mask |= commac->rx_chan_mask;
list_add(&commac->list, &mal->commac);
write_unlock_irqrestore(&mal_list_lock, flags);
MOD_INC_USE_COUNT;
return 0;
}
int mal_unregister_commac(struct ibm_ocp_mal *mal, struct mal_commac *commac)
{
unsigned long flags;
write_lock_irqsave(&mal_list_lock, flags);
mal->tx_chan_mask &= ~commac->tx_chan_mask;
mal->rx_chan_mask &= ~commac->rx_chan_mask;
list_del_init(&commac->list);
write_unlock_irqrestore(&mal_list_lock, flags);
MOD_DEC_USE_COUNT;
return 0;
}
int mal_set_rcbs(struct ibm_ocp_mal *mal, int channel, unsigned long size)
{
switch (channel) {
case 0:
set_mal_dcrn(mal, DCRN_MALRCBS0, size);
break;
#ifdef DCRN_MALRCBS1
case 1:
set_mal_dcrn(mal, DCRN_MALRCBS1, size);
break;
#endif
#ifdef DCRN_MALRCBS2
case 2:
set_mal_dcrn(mal, DCRN_MALRCBS2, size);
break;
#endif
#ifdef DCRN_MALRCBS3
case 3:
set_mal_dcrn(mal, DCRN_MALRCBS3, size);
break;
#endif
default:
return -EINVAL;
}
return 0;
}
static irqreturn_t mal_serr(int irq, void *dev_instance, struct pt_regs *regs)
{
struct ibm_ocp_mal *mal = dev_instance;
unsigned long mal_error;
/*
* This SERR applies to one of the devices on the MAL, here we charge
* it against the first EMAC registered for the MAL.
*/
mal_error = get_mal_dcrn(mal, DCRN_MALESR);
printk(KERN_ERR "%s: System Error (MALESR=%lx)\n",
"MAL" /* FIXME: get the name right */ , mal_error);
/* FIXME: decipher error */
/* DIXME: distribute to commacs, if possible */
/* Clear the error status register */
set_mal_dcrn(mal, DCRN_MALESR, mal_error);
return IRQ_HANDLED;
}
static irqreturn_t mal_txeob(int irq, void *dev_instance, struct pt_regs *regs)
{
struct ibm_ocp_mal *mal = dev_instance;
struct list_head *l;
unsigned long isr;
isr = get_mal_dcrn(mal, DCRN_MALTXEOBISR);
set_mal_dcrn(mal, DCRN_MALTXEOBISR, isr);
read_lock(&mal_list_lock);
list_for_each(l, &mal->commac) {
struct mal_commac *mc = list_entry(l, struct mal_commac, list);
if (isr & mc->tx_chan_mask) {
mc->ops->txeob(mc->dev, isr & mc->tx_chan_mask);
}
}
read_unlock(&mal_list_lock);
return IRQ_HANDLED;
}
static irqreturn_t mal_rxeob(int irq, void *dev_instance, struct pt_regs *regs)
{
struct ibm_ocp_mal *mal = dev_instance;
struct list_head *l;
unsigned long isr;
isr = get_mal_dcrn(mal, DCRN_MALRXEOBISR);
set_mal_dcrn(mal, DCRN_MALRXEOBISR, isr);
read_lock(&mal_list_lock);
list_for_each(l, &mal->commac) {
struct mal_commac *mc = list_entry(l, struct mal_commac, list);
if (isr & mc->rx_chan_mask) {
mc->ops->rxeob(mc->dev, isr & mc->rx_chan_mask);
}
}
read_unlock(&mal_list_lock);
return IRQ_HANDLED;
}
static irqreturn_t mal_txde(int irq, void *dev_instance, struct pt_regs *regs)
{
struct ibm_ocp_mal *mal = dev_instance;
struct list_head *l;
unsigned long deir;
deir = get_mal_dcrn(mal, DCRN_MALTXDEIR);
/* FIXME: print which MAL correctly */
printk(KERN_WARNING "%s: Tx descriptor error (MALTXDEIR=%lx)\n",
"MAL", deir);
read_lock(&mal_list_lock);
list_for_each(l, &mal->commac) {
struct mal_commac *mc = list_entry(l, struct mal_commac, list);
if (deir & mc->tx_chan_mask) {
mc->ops->txde(mc->dev, deir & mc->tx_chan_mask);
}
}
read_unlock(&mal_list_lock);
return IRQ_HANDLED;
}
/*
* This interrupt should be very rare at best. This occurs when
* the hardware has a problem with the receive descriptors. The manual
* states that it occurs when the hardware cannot the receive descriptor
* empty bit is not set. The recovery mechanism will be to
* traverse through the descriptors, handle any that are marked to be
* handled and reinitialize each along the way. At that point the driver
* will be restarted.
*/
static irqreturn_t mal_rxde(int irq, void *dev_instance, struct pt_regs *regs)
{
struct ibm_ocp_mal *mal = dev_instance;
struct list_head *l;
unsigned long deir;
deir = get_mal_dcrn(mal, DCRN_MALRXDEIR);
/*
* This really is needed. This case encountered in stress testing.
*/
if (deir == 0)
return IRQ_HANDLED;
/* FIXME: print which MAL correctly */
printk(KERN_WARNING "%s: Rx descriptor error (MALRXDEIR=%lx)\n",
"MAL", deir);
read_lock(&mal_list_lock);
list_for_each(l, &mal->commac) {
struct mal_commac *mc = list_entry(l, struct mal_commac, list);
if (deir & mc->rx_chan_mask) {
mc->ops->rxde(mc->dev, deir & mc->rx_chan_mask);
}
}
read_unlock(&mal_list_lock);
return IRQ_HANDLED;
}
static int __init mal_probe(struct ocp_device *ocpdev)
{
struct ibm_ocp_mal *mal = NULL;
struct ocp_func_mal_data *maldata;
int err = 0;
maldata = (struct ocp_func_mal_data *)ocpdev->def->additions;
if (maldata == NULL) {
printk(KERN_ERR "mal%d: Missing additional datas !\n",
ocpdev->def->index);
return -ENODEV;
}
mal = kmalloc(sizeof(struct ibm_ocp_mal), GFP_KERNEL);
if (mal == NULL) {
printk(KERN_ERR
"mal%d: Out of memory allocating MAL structure !\n",
ocpdev->def->index);
return -ENOMEM;
}
memset(mal, 0, sizeof(*mal));
switch (ocpdev->def->index) {
case 0:
mal->dcrbase = DCRN_MAL_BASE;
break;
#ifdef DCRN_MAL1_BASE
case 1:
mal->dcrbase = DCRN_MAL1_BASE;
break;
#endif
default:
BUG();
}
/**************************/
INIT_LIST_HEAD(&mal->commac);
set_mal_dcrn(mal, DCRN_MALRXCARR, 0xFFFFFFFF);
set_mal_dcrn(mal, DCRN_MALTXCARR, 0xFFFFFFFF);
set_mal_dcrn(mal, DCRN_MALCR, MALCR_MMSR); /* 384 */
/* FIXME: Add delay */
/* Set the MAL configuration register */
set_mal_dcrn(mal, DCRN_MALCR,
MALCR_PLBB | MALCR_OPBBL | MALCR_LEA |
MALCR_PLBLT_DEFAULT);
/* It would be nice to allocate buffers separately for each
* channel, but we can't because the channels share the upper
* 13 bits of address lines. Each channels buffer must also
* be 4k aligned, so we allocate 4k for each channel. This is
* inefficient FIXME: do better, if possible */
mal->tx_virt_addr = dma_alloc_coherent(&ocpdev->dev,
MAL_DT_ALIGN *
maldata->num_tx_chans,
&mal->tx_phys_addr, GFP_KERNEL);
if (mal->tx_virt_addr == NULL) {
printk(KERN_ERR
"mal%d: Out of memory allocating MAL descriptors !\n",
ocpdev->def->index);
err = -ENOMEM;
goto fail;
}
/* God, oh, god, I hate DCRs */
set_mal_dcrn(mal, DCRN_MALTXCTP0R, mal->tx_phys_addr);
#ifdef DCRN_MALTXCTP1R
if (maldata->num_tx_chans > 1)
set_mal_dcrn(mal, DCRN_MALTXCTP1R,
mal->tx_phys_addr + MAL_DT_ALIGN);
#endif /* DCRN_MALTXCTP1R */
#ifdef DCRN_MALTXCTP2R
if (maldata->num_tx_chans > 2)
set_mal_dcrn(mal, DCRN_MALTXCTP2R,
mal->tx_phys_addr + 2 * MAL_DT_ALIGN);
#endif /* DCRN_MALTXCTP2R */
#ifdef DCRN_MALTXCTP3R
if (maldata->num_tx_chans > 3)
set_mal_dcrn(mal, DCRN_MALTXCTP3R,
mal->tx_phys_addr + 3 * MAL_DT_ALIGN);
#endif /* DCRN_MALTXCTP3R */
#ifdef DCRN_MALTXCTP4R
if (maldata->num_tx_chans > 4)
set_mal_dcrn(mal, DCRN_MALTXCTP4R,
mal->tx_phys_addr + 4 * MAL_DT_ALIGN);
#endif /* DCRN_MALTXCTP4R */
#ifdef DCRN_MALTXCTP5R
if (maldata->num_tx_chans > 5)
set_mal_dcrn(mal, DCRN_MALTXCTP5R,
mal->tx_phys_addr + 5 * MAL_DT_ALIGN);
#endif /* DCRN_MALTXCTP5R */
#ifdef DCRN_MALTXCTP6R
if (maldata->num_tx_chans > 6)
set_mal_dcrn(mal, DCRN_MALTXCTP6R,
mal->tx_phys_addr + 6 * MAL_DT_ALIGN);
#endif /* DCRN_MALTXCTP6R */
#ifdef DCRN_MALTXCTP7R
if (maldata->num_tx_chans > 7)
set_mal_dcrn(mal, DCRN_MALTXCTP7R,
mal->tx_phys_addr + 7 * MAL_DT_ALIGN);
#endif /* DCRN_MALTXCTP7R */
mal->rx_virt_addr = dma_alloc_coherent(&ocpdev->dev,
MAL_DT_ALIGN *
maldata->num_rx_chans,
&mal->rx_phys_addr, GFP_KERNEL);
set_mal_dcrn(mal, DCRN_MALRXCTP0R, mal->rx_phys_addr);
#ifdef DCRN_MALRXCTP1R
if (maldata->num_rx_chans > 1)
set_mal_dcrn(mal, DCRN_MALRXCTP1R,
mal->rx_phys_addr + MAL_DT_ALIGN);
#endif /* DCRN_MALRXCTP1R */
#ifdef DCRN_MALRXCTP2R
if (maldata->num_rx_chans > 2)
set_mal_dcrn(mal, DCRN_MALRXCTP2R,
mal->rx_phys_addr + 2 * MAL_DT_ALIGN);
#endif /* DCRN_MALRXCTP2R */
#ifdef DCRN_MALRXCTP3R
if (maldata->num_rx_chans > 3)
set_mal_dcrn(mal, DCRN_MALRXCTP3R,
mal->rx_phys_addr + 3 * MAL_DT_ALIGN);
#endif /* DCRN_MALRXCTP3R */
err = request_irq(maldata->serr_irq, mal_serr, 0, "MAL SERR", mal);
if (err)
goto fail;
err = request_irq(maldata->txde_irq, mal_txde, 0, "MAL TX DE ", mal);
if (err)
goto fail;
err = request_irq(maldata->txeob_irq, mal_txeob, 0, "MAL TX EOB", mal);
if (err)
goto fail;
err = request_irq(maldata->rxde_irq, mal_rxde, 0, "MAL RX DE", mal);
if (err)
goto fail;
err = request_irq(maldata->rxeob_irq, mal_rxeob, 0, "MAL RX EOB", mal);
if (err)
goto fail;
set_mal_dcrn(mal, DCRN_MALIER,
MALIER_DE | MALIER_NE | MALIER_TE |
MALIER_OPBE | MALIER_PLBE);
/* Advertise me to the rest of the world */
ocp_set_drvdata(ocpdev, mal);
printk(KERN_INFO "mal%d: Initialized, %d tx channels, %d rx channels\n",
ocpdev->def->index, maldata->num_tx_chans,
maldata->num_rx_chans);
return 0;
fail:
/* FIXME: dispose requested IRQs ! */
if (err && mal)
kfree(mal);
return err;
}
static void __exit mal_remove(struct ocp_device *ocpdev)
{
struct ibm_ocp_mal *mal = ocp_get_drvdata(ocpdev);
struct ocp_func_mal_data *maldata = ocpdev->def->additions;
BUG_ON(!maldata);
ocp_set_drvdata(ocpdev, NULL);
/* FIXME: shut down the MAL, deal with dependency with emac */
free_irq(maldata->serr_irq, mal);
free_irq(maldata->txde_irq, mal);
free_irq(maldata->txeob_irq, mal);
free_irq(maldata->rxde_irq, mal);
free_irq(maldata->rxeob_irq, mal);
if (mal->tx_virt_addr)
dma_free_coherent(&ocpdev->dev,
MAL_DT_ALIGN * maldata->num_tx_chans,
mal->tx_virt_addr, mal->tx_phys_addr);
if (mal->rx_virt_addr)
dma_free_coherent(&ocpdev->dev,
MAL_DT_ALIGN * maldata->num_rx_chans,
mal->rx_virt_addr, mal->rx_phys_addr);
kfree(mal);
}
/* Structure for a device driver */
static struct ocp_device_id mal_ids[] = {
{.vendor = OCP_ANY_ID,.function = OCP_FUNC_MAL},
{.vendor = OCP_VENDOR_INVALID}
};
static struct ocp_driver mal_driver = {
.name = "mal",
.id_table = mal_ids,
.probe = mal_probe,
.remove = mal_remove,
};
static int __init init_mals(void)
{
int rc;
rc = ocp_register_driver(&mal_driver);
if (rc < 0) {
ocp_unregister_driver(&mal_driver);
return -ENODEV;
}
return 0;
}
static void __exit exit_mals(void)
{
ocp_unregister_driver(&mal_driver);
}
module_init(init_mals);
module_exit(exit_mals);
drivers/net/ibm_emac/ibm_emac_mal.h 0 → 100644
View file @ ee86da9d
#ifndef _IBM_EMAC_MAL_H
#define _IBM_EMAC_MAL_H
#include <linux/list.h>
#define MAL_DT_ALIGN (4096) /* Alignment for each channel's descriptor table */
#define MAL_CHAN_MASK(chan) (0x80000000 >> (chan))
/* MAL Buffer Descriptor structure */
struct mal_descriptor {
unsigned short ctrl; /* MAL / Commac status control bits */
short data_len; /* Max length is 4K-1 (12 bits) */
unsigned char *data_ptr; /* pointer to actual data buffer */
} __attribute__ ((packed));
/* the following defines are for the MadMAL status and control registers. */
/* MADMAL transmit and receive status/control bits */
#define MAL_RX_CTRL_EMPTY 0x8000
#define MAL_RX_CTRL_WRAP 0x4000
#define MAL_RX_CTRL_CM 0x2000
#define MAL_RX_CTRL_LAST 0x1000
#define MAL_RX_CTRL_FIRST 0x0800
#define MAL_RX_CTRL_INTR 0x0400
#define MAL_TX_CTRL_READY 0x8000
#define MAL_TX_CTRL_WRAP 0x4000
#define MAL_TX_CTRL_CM 0x2000
#define MAL_TX_CTRL_LAST 0x1000
#define MAL_TX_CTRL_INTR 0x0400
struct mal_commac_ops {
void (*txeob) (void *dev, u32 chanmask);
void (*txde) (void *dev, u32 chanmask);
void (*rxeob) (void *dev, u32 chanmask);
void (*rxde) (void *dev, u32 chanmask);
};
struct mal_commac {
struct mal_commac_ops *ops;
void *dev;
u32 tx_chan_mask, rx_chan_mask;
struct list_head list;
};
struct ibm_ocp_mal {
int dcrbase;
struct list_head commac;
u32 tx_chan_mask, rx_chan_mask;
dma_addr_t tx_phys_addr;
struct mal_descriptor *tx_virt_addr;
dma_addr_t rx_phys_addr;
struct mal_descriptor *rx_virt_addr;
};
#define GET_MAL_STANZA(base,dcrn) \
case base: \
x = mfdcr(dcrn(base)); \
break;
#define SET_MAL_STANZA(base,dcrn, val) \
case base: \
mtdcr(dcrn(base), (val)); \
break;
#define GET_MAL0_STANZA(dcrn) GET_MAL_STANZA(DCRN_MAL_BASE,dcrn)
#define SET_MAL0_STANZA(dcrn,val) SET_MAL_STANZA(DCRN_MAL_BASE,dcrn,val)
#ifdef DCRN_MAL1_BASE
#define GET_MAL1_STANZA(dcrn) GET_MAL_STANZA(DCRN_MAL1_BASE,dcrn)
#define SET_MAL1_STANZA(dcrn,val) SET_MAL_STANZA(DCRN_MAL1_BASE,dcrn,val)
#else /* ! DCRN_MAL1_BASE */
#define GET_MAL1_STANZA(dcrn)
#define SET_MAL1_STANZA(dcrn,val)
#endif
#define get_mal_dcrn(mal, dcrn) ({ \
u32 x; \
switch ((mal)->dcrbase) { \
GET_MAL0_STANZA(dcrn) \
GET_MAL1_STANZA(dcrn) \
default: \
BUG(); \
} \
x; })
#define set_mal_dcrn(mal, dcrn, val) do { \
switch ((mal)->dcrbase) { \
SET_MAL0_STANZA(dcrn,val) \
SET_MAL1_STANZA(dcrn,val) \
default: \
BUG(); \
} } while (0)
static inline void mal_enable_tx_channels(struct ibm_ocp_mal *mal, u32 chanmask)
{
set_mal_dcrn(mal, DCRN_MALTXCASR,
get_mal_dcrn(mal, DCRN_MALTXCASR) | chanmask);
}
static inline void mal_disable_tx_channels(struct ibm_ocp_mal *mal,
u32 chanmask)
{
set_mal_dcrn(mal, DCRN_MALTXCARR, chanmask);
}
static inline void mal_enable_rx_channels(struct ibm_ocp_mal *mal, u32 chanmask)
{
set_mal_dcrn(mal, DCRN_MALRXCASR,
get_mal_dcrn(mal, DCRN_MALRXCASR) | chanmask);
}
static inline void mal_disable_rx_channels(struct ibm_ocp_mal *mal,
u32 chanmask)
{
set_mal_dcrn(mal, DCRN_MALRXCARR, chanmask);
}
extern int mal_register_commac(struct ibm_ocp_mal *mal,
struct mal_commac *commac);
extern int mal_unregister_commac(struct ibm_ocp_mal *mal,
struct mal_commac *commac);
extern int mal_set_rcbs(struct ibm_ocp_mal *mal, int channel,
unsigned long size);
#endif /* _IBM_EMAC_MAL_H */
drivers/net/ibm_emac/ibm_emac_phy.c 0 → 100644
View file @ ee86da9d
/*
* ibm_ocp_phy.c
*
* PHY drivers for the ibm ocp ethernet driver. Borrowed
* from sungem_phy.c, though I only kept the generic MII
* driver for now.
*
* This file should be shared with other drivers or eventually
* merged as the "low level" part of miilib
*
* (c) 2003, Benjamin Herrenscmidt (benh@kernel.crashing.org)
*
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/delay.h>
#include "ibm_emac_phy.h"
static int reset_one_mii_phy(struct mii_phy *phy, int phy_id)
{
u16 val;
int limit = 10000;
val = __phy_read(phy, phy_id, MII_BMCR);
val &= ~BMCR_ISOLATE;
val |= BMCR_RESET;
__phy_write(phy, phy_id, MII_BMCR, val);
udelay(100);
while (limit--) {
val = __phy_read(phy, phy_id, MII_BMCR);
if ((val & BMCR_RESET) == 0)
break;
udelay(10);
}
if ((val & BMCR_ISOLATE) && limit > 0)
__phy_write(phy, phy_id, MII_BMCR, val & ~BMCR_ISOLATE);
return (limit <= 0);
}
static int cis8201_init(struct mii_phy *phy)
{
u16 epcr;
epcr = phy_read(phy, MII_CIS8201_EPCR);
epcr &= ~EPCR_MODE_MASK;
switch (phy->mode) {
case PHY_MODE_TBI:
epcr |= EPCR_TBI_MODE;
break;
case PHY_MODE_RTBI:
epcr |= EPCR_RTBI_MODE;
break;
case PHY_MODE_GMII:
epcr |= EPCR_GMII_MODE;
break;
case PHY_MODE_RGMII:
default:
epcr |= EPCR_RGMII_MODE;
}
phy_write(phy, MII_CIS8201_EPCR, epcr);
return 0;
}
static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise)
{
u16 ctl, adv;
phy->autoneg = 1;
phy->speed = SPEED_10;
phy->duplex = DUPLEX_HALF;
phy->pause = 0;
phy->advertising = advertise;
/* Setup standard advertise */
adv = phy_read(phy, MII_ADVERTISE);
adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
if (advertise & ADVERTISED_10baseT_Half)
adv |= ADVERTISE_10HALF;
if (advertise & ADVERTISED_10baseT_Full)
adv |= ADVERTISE_10FULL;
if (advertise & ADVERTISED_100baseT_Half)
adv |= ADVERTISE_100HALF;
if (advertise & ADVERTISED_100baseT_Full)
adv |= ADVERTISE_100FULL;
phy_write(phy, MII_ADVERTISE, adv);
/* Start/Restart aneg */
ctl = phy_read(phy, MII_BMCR);
ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
phy_write(phy, MII_BMCR, ctl);
return 0;
}
static int genmii_setup_forced(struct mii_phy *phy, int speed, int fd)
{
u16 ctl;
phy->autoneg = 0;
phy->speed = speed;
phy->duplex = fd;
phy->pause = 0;
ctl = phy_read(phy, MII_BMCR);
ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_ANENABLE);
/* First reset the PHY */
phy_write(phy, MII_BMCR, ctl | BMCR_RESET);
/* Select speed & duplex */
switch (speed) {
case SPEED_10:
break;
case SPEED_100:
ctl |= BMCR_SPEED100;
break;
case SPEED_1000:
default:
return -EINVAL;
}
if (fd == DUPLEX_FULL)
ctl |= BMCR_FULLDPLX;
phy_write(phy, MII_BMCR, ctl);
return 0;
}
static int genmii_poll_link(struct mii_phy *phy)
{
u16 status;
(void)phy_read(phy, MII_BMSR);
status = phy_read(phy, MII_BMSR);
if ((status & BMSR_LSTATUS) == 0)
return 0;
if (phy->autoneg && !(status & BMSR_ANEGCOMPLETE))
return 0;
return 1;
}
#define MII_CIS8201_ACSR 0x1c
#define ACSR_DUPLEX_STATUS 0x0020
#define ACSR_SPEED_1000BASET 0x0010
#define ACSR_SPEED_100BASET 0x0008
static int cis8201_read_link(struct mii_phy *phy)
{
u16 acsr;
if (phy->autoneg) {
acsr = phy_read(phy, MII_CIS8201_ACSR);
if (acsr & ACSR_DUPLEX_STATUS)
phy->duplex = DUPLEX_FULL;
else
phy->duplex = DUPLEX_HALF;
if (acsr & ACSR_SPEED_1000BASET) {
phy->speed = SPEED_1000;
} else if (acsr & ACSR_SPEED_100BASET)
phy->speed = SPEED_100;
else
phy->speed = SPEED_10;
phy->pause = 0;
}
/* On non-aneg, we assume what we put in BMCR is the speed,
* though magic-aneg shouldn't prevent this case from occurring
*/
return 0;
}
static int genmii_read_link(struct mii_phy *phy)
{
u16 lpa;
if (phy->autoneg) {
lpa = phy_read(phy, MII_LPA);
if (lpa & (LPA_10FULL | LPA_100FULL))
phy->duplex = DUPLEX_FULL;
else
phy->duplex = DUPLEX_HALF;
if (lpa & (LPA_100FULL | LPA_100HALF))
phy->speed = SPEED_100;
else
phy->speed = SPEED_10;
phy->pause = 0;
}
/* On non-aneg, we assume what we put in BMCR is the speed,
* though magic-aneg shouldn't prevent this case from occurring
*/
return 0;
}
#define MII_BASIC_FEATURES (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | \
SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | \
SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII)
#define MII_GBIT_FEATURES (MII_BASIC_FEATURES | \
SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full)
/* CIS8201 phy ops */
static struct mii_phy_ops cis8201_phy_ops = {
init:cis8201_init,
setup_aneg:genmii_setup_aneg,
setup_forced:genmii_setup_forced,
poll_link:genmii_poll_link,
read_link:cis8201_read_link
};
/* Generic implementation for most 10/100 PHYs */
static struct mii_phy_ops generic_phy_ops = {
setup_aneg:genmii_setup_aneg,
setup_forced:genmii_setup_forced,
poll_link:genmii_poll_link,
read_link:genmii_read_link
};
static struct mii_phy_def cis8201_phy_def = {
phy_id:0x000fc410,
phy_id_mask:0x000ffff0,
name:"CIS8201 Gigabit Ethernet",
features:MII_GBIT_FEATURES,
magic_aneg:0,
ops:&cis8201_phy_ops
};
static struct mii_phy_def genmii_phy_def = {
phy_id:0x00000000,
phy_id_mask:0x00000000,
name:"Generic MII",
features:MII_BASIC_FEATURES,
magic_aneg:0,
ops:&generic_phy_ops
};
static struct mii_phy_def *mii_phy_table[] = {
&cis8201_phy_def,
&genmii_phy_def,
NULL
};
int mii_phy_probe(struct mii_phy *phy, int mii_id)
{
int rc;
u32 id;
struct mii_phy_def *def;
int i;
phy->autoneg = 0;
phy->advertising = 0;
phy->mii_id = mii_id;
phy->speed = 0;
phy->duplex = 0;
phy->pause = 0;
/* Take PHY out of isloate mode and reset it. */
rc = reset_one_mii_phy(phy, mii_id);
if (rc)
return -ENODEV;
/* Read ID and find matching entry */
id = (phy_read(phy, MII_PHYSID1) << 16 | phy_read(phy, MII_PHYSID2))
& 0xfffffff0;
for (i = 0; (def = mii_phy_table[i]) != NULL; i++)
if ((id & def->phy_id_mask) == def->phy_id)
break;
/* Should never be NULL (we have a generic entry), but... */
if (def == NULL)
return -ENODEV;
phy->def = def;
/* Setup default advertising */
phy->advertising = def->features;
return 0;
}
MODULE_LICENSE("GPL");
drivers/net/ibm_emac/ibm_emac_phy.h 0 → 100644
View file @ ee86da9d
/*
* ibm_emac_phy.h
*
*
* Benjamin Herrenschmidt <benh@kernel.crashing.org>
* February 2003
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
*
* This file basically duplicates sungem_phy.{c,h} with different PHYs
* supported. I'm looking into merging that in a single mii layer more
* flexible than mii.c
*/
#ifndef _IBM_EMAC_PHY_H_
#define _IBM_EMAC_PHY_H_
/*
* PHY mode settings
* Used for multi-mode capable PHYs
*/
#define PHY_MODE_NA 0
#define PHY_MODE_MII 1
#define PHY_MODE_RMII 2
#define PHY_MODE_SMII 3
#define PHY_MODE_RGMII 4
#define PHY_MODE_TBI 5
#define PHY_MODE_GMII 6
#define PHY_MODE_RTBI 7
#define PHY_MODE_SGMII 8
/*
* PHY specific registers/values
*/
/* CIS8201 */
#define MII_CIS8201_EPCR 0x17
#define EPCR_MODE_MASK 0x3000
#define EPCR_GMII_MODE 0x0000
#define EPCR_RGMII_MODE 0x1000
#define EPCR_TBI_MODE 0x2000
#define EPCR_RTBI_MODE 0x3000
struct mii_phy;
/* Operations supported by any kind of PHY */
struct mii_phy_ops {
int (*init) (struct mii_phy * phy);
int (*suspend) (struct mii_phy * phy, int wol_options);
int (*setup_aneg) (struct mii_phy * phy, u32 advertise);
int (*setup_forced) (struct mii_phy * phy, int speed, int fd);
int (*poll_link) (struct mii_phy * phy);
int (*read_link) (struct mii_phy * phy);
};
/* Structure used to statically define an mii/gii based PHY */
struct mii_phy_def {
u32 phy_id; /* Concatenated ID1 << 16 | ID2 */
u32 phy_id_mask; /* Significant bits */
u32 features; /* Ethtool SUPPORTED_* defines */
int magic_aneg; /* Autoneg does all speed test for us */
const char *name;
const struct mii_phy_ops *ops;
};
/* An instance of a PHY, partially borrowed from mii_if_info */
struct mii_phy {
struct mii_phy_def *def;
int advertising;
int mii_id;
/* 1: autoneg enabled, 0: disabled */
int autoneg;
/* forced speed & duplex (no autoneg)
* partner speed & duplex & pause (autoneg)
*/
int speed;
int duplex;
int pause;
/* PHY mode - if needed */
int mode;
/* Provided by host chip */
struct net_device *dev;
int (*mdio_read) (struct net_device * dev, int mii_id, int reg);
void (*mdio_write) (struct net_device * dev, int mii_id, int reg,
int val);
};
/* Pass in a struct mii_phy with dev, mdio_read and mdio_write
* filled, the remaining fields will be filled on return
*/
extern int mii_phy_probe(struct mii_phy *phy, int mii_id);
static inline int __phy_read(struct mii_phy *phy, int id, int reg)
{
return phy->mdio_read(phy->dev, id, reg);
}
static inline void __phy_write(struct mii_phy *phy, int id, int reg, int val)
{
phy->mdio_write(phy->dev, id, reg, val);
}
static inline int phy_read(struct mii_phy *phy, int reg)
{
return phy->mdio_read(phy->dev, phy->mii_id, reg);
}
static inline void phy_write(struct mii_phy *phy, int reg, int val)
{
phy->mdio_write(phy->dev, phy->mii_id, reg, val);
}
#endif /* _IBM_EMAC_PHY_H_ */
drivers/net/ibm_emac/ibm_emac_rgmii.h 0 → 100644
View file @ ee86da9d
/*
* Defines for the IBM RGMII bridge
*
* Based on ocp_zmii.h/ibm_emac_zmii.h
* Armin Kuster akuster@mvista.com
*
* Copyright 2004 MontaVista Software, Inc.
* Matt Porter <mporter@kernel.crashing.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifndef _IBM_EMAC_RGMII_H_
#define _IBM_EMAC_RGMII_H_
#include <linux/config.h>
/* RGMII bridge */
typedef struct rgmii_regs {
u32 fer; /* Function enable register */
u32 ssr; /* Speed select register */
} rgmii_t;
#define RGMII_INPUTS 4
/* RGMII device */
struct ibm_ocp_rgmii {
struct rgmii_regs *base;
int mode[RGMII_INPUTS];
int users; /* number of EMACs using this RGMII bridge */
};
/* Fuctional Enable Reg */
#define RGMII_FER_MASK(x) (0x00000007 << (4*x))
#define RGMII_RTBI 0x00000004
#define RGMII_RGMII 0x00000005
#define RGMII_TBI 0x00000006
#define RGMII_GMII 0x00000007
/* Speed Selection reg */
#define RGMII_SP2_100 0x00000002
#define RGMII_SP2_1000 0x00000004
#define RGMII_SP3_100 0x00000200
#define RGMII_SP3_1000 0x00000400
#define RGMII_MII2_SPDMASK 0x00000007
#define RGMII_MII3_SPDMASK 0x00000700
#define RGMII_MII2_100MB RGMII_SP2_100 & ~RGMII_SP2_1000
#define RGMII_MII2_1000MB RGMII_SP2_1000 & ~RGMII_SP2_100
#define RGMII_MII2_10MB ~(RGMII_SP2_100 | RGMII_SP2_1000)
#define RGMII_MII3_100MB RGMII_SP3_100 & ~RGMII_SP3_1000
#define RGMII_MII3_1000MB RGMII_SP3_1000 & ~RGMII_SP3_100
#define RGMII_MII3_10MB ~(RGMII_SP3_100 | RGMII_SP3_1000)
#define RTBI 0
#define RGMII 1
#define TBI 2
#define GMII 3
#endif /* _IBM_EMAC_RGMII_H_ */
drivers/net/ibm_emac/ibm_emac_tah.h 0 → 100644
View file @ ee86da9d
/*
* Defines for the IBM TAH
*
* Copyright 2004 MontaVista Software, Inc.
* Matt Porter <mporter@kernel.crashing.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifndef _IBM_EMAC_TAH_H
#define _IBM_EMAC_TAH_H
/* TAH */
typedef struct tah_regs {
u32 tah_revid;
u32 pad[3];
u32 tah_mr;
u32 tah_ssr0;
u32 tah_ssr1;
u32 tah_ssr2;
u32 tah_ssr3;
u32 tah_ssr4;
u32 tah_ssr5;
u32 tah_tsr;
} tah_t;
/* TAH engine */
#define TAH_MR_CVR 0x80000000
#define TAH_MR_SR 0x40000000
#define TAH_MR_ST_256 0x01000000
#define TAH_MR_ST_512 0x02000000
#define TAH_MR_ST_768 0x03000000
#define TAH_MR_ST_1024 0x04000000
#define TAH_MR_ST_1280 0x05000000
#define TAH_MR_ST_1536 0x06000000
#define TAH_MR_TFS_16KB 0x00000000
#define TAH_MR_TFS_2KB 0x00200000
#define TAH_MR_TFS_4KB 0x00400000
#define TAH_MR_TFS_6KB 0x00600000
#define TAH_MR_TFS_8KB 0x00800000
#define TAH_MR_TFS_10KB 0x00a00000
#define TAH_MR_DTFP 0x00100000
#define TAH_MR_DIG 0x00080000
#endif /* _IBM_EMAC_TAH_H */
drivers/net/ibm_emac/ibm_emac_zmii.h 0 → 100644
View file @ ee86da9d
/*
* ocp_zmii.h
*
* Defines for the IBM ZMII bridge
*
* Armin Kuster akuster@mvista.com
* Dec, 2001
*
* Copyright 2001 MontaVista Softare Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifndef _IBM_EMAC_ZMII_H_
#define _IBM_EMAC_ZMII_H_
#include <linux/config.h>
/* ZMII bridge registers */
struct zmii_regs {
u32 fer; /* Function enable reg */
u32 ssr; /* Speed select reg */
u32 smiirs; /* SMII status reg */
};
#define ZMII_INPUTS 4
/* ZMII device */
struct ibm_ocp_zmii {
struct zmii_regs *base;
int mode[ZMII_INPUTS];
int users; /* number of EMACs using this ZMII bridge */
};
/* Fuctional Enable Reg */
#define ZMII_FER_MASK(x) (0xf0000000 >> (4*x))
#define ZMII_MDI0 0x80000000
#define ZMII_SMII0 0x40000000
#define ZMII_RMII0 0x20000000
#define ZMII_MII0 0x10000000
#define ZMII_MDI1 0x08000000
#define ZMII_SMII1 0x04000000
#define ZMII_RMII1 0x02000000
#define ZMII_MII1 0x01000000
#define ZMII_MDI2 0x00800000
#define ZMII_SMII2 0x00400000
#define ZMII_RMII2 0x00200000
#define ZMII_MII2 0x00100000
#define ZMII_MDI3 0x00080000
#define ZMII_SMII3 0x00040000
#define ZMII_RMII3 0x00020000
#define ZMII_MII3 0x00010000
/* Speed Selection reg */
#define ZMII_SCI0 0x40000000
#define ZMII_FSS0 0x20000000
#define ZMII_SP0 0x10000000
#define ZMII_SCI1 0x04000000
#define ZMII_FSS1 0x02000000
#define ZMII_SP1 0x01000000
#define ZMII_SCI2 0x00400000
#define ZMII_FSS2 0x00200000
#define ZMII_SP2 0x00100000
#define ZMII_SCI3 0x00040000
#define ZMII_FSS3 0x00020000
#define ZMII_SP3 0x00010000
#define ZMII_MII0_100MB ZMII_SP0
#define ZMII_MII0_10MB ~ZMII_SP0
#define ZMII_MII1_100MB ZMII_SP1
#define ZMII_MII1_10MB ~ZMII_SP1
#define ZMII_MII2_100MB ZMII_SP2
#define ZMII_MII2_10MB ~ZMII_SP2
#define ZMII_MII3_100MB ZMII_SP3
#define ZMII_MII3_10MB ~ZMII_SP3
/* SMII Status reg */
#define ZMII_STS0 0xFF000000 /* EMAC0 smii status mask */
#define ZMII_STS1 0x00FF0000 /* EMAC1 smii status mask */
#define SMII 0
#define RMII 1
#define MII 2
#define MDI 3
#endif /* _IBM_EMAC_ZMII_H_ */
drivers/net/wan/farsync.c
View file @ ee86da9d
This source diff could not be displayed because it is too large. You can view the blob instead.
drivers/net/wan/farsync.h
View file @ ee86da9d
...@@ -32,8 +32,13 @@ ...@@ -32,8 +32,13 @@
* A short common prefix is useful for routines within the driver to avoid * A short common prefix is useful for routines within the driver to avoid
* conflict with other similar drivers and I chosen to use "fst_" for this * conflict with other similar drivers and I chosen to use "fst_" for this
* purpose (FarSite T-series). * purpose (FarSite T-series).
*
* Finally the device driver needs a short network interface name. Since
* "hdlc" is already in use I've chosen the even less informative "sync"
* for the present.
*/ */
#define FST_NAME "fst" /* In debug/info etc */ #define FST_NAME "fst" /* In debug/info etc */
#define FST_NDEV_NAME "sync" /* For net interface */
#define FST_DEV_NAME "farsync" /* For misc interfaces */ #define FST_DEV_NAME "farsync" /* For misc interfaces */
...@@ -45,7 +50,7 @@ ...@@ -45,7 +50,7 @@
* have individual versions (or IDs) that move much faster than the * have individual versions (or IDs) that move much faster than the
* the release version as individual updates are tracked. * the release version as individual updates are tracked.
*/ */
#define FST_USER_VERSION "0.09" #define FST_USER_VERSION "1.04"
/* Ioctl call command values /* Ioctl call command values
...@@ -100,6 +105,7 @@ struct fstioc_info { ...@@ -100,6 +105,7 @@ struct fstioc_info {
unsigned int state; /* State of card */ unsigned int state; /* State of card */
unsigned int index; /* Index of port ioctl was issued on */ unsigned int index; /* Index of port ioctl was issued on */
unsigned int smcFirmwareVersion; unsigned int smcFirmwareVersion;
unsigned long kernelVersion; /* What Kernel version we are working with */
unsigned short lineInterface; /* Physical interface type */ unsigned short lineInterface; /* Physical interface type */
unsigned char proto; /* Line protocol */ unsigned char proto; /* Line protocol */
unsigned char internalClock; /* 1 => internal clock, 0 => external */ unsigned char internalClock; /* 1 => internal clock, 0 => external */
...@@ -110,6 +116,31 @@ struct fstioc_info { ...@@ -110,6 +116,31 @@ struct fstioc_info {
unsigned short cableStatus; /* lsb: 0=> present, 1=> absent */ unsigned short cableStatus; /* lsb: 0=> present, 1=> absent */
unsigned short cardMode; /* lsb: LED id mode */ unsigned short cardMode; /* lsb: LED id mode */
unsigned short debug; /* Debug flags */ unsigned short debug; /* Debug flags */
unsigned char transparentMode; /* Not used always 0 */
unsigned char invertClock; /* Invert clock feature for syncing */
unsigned char startingSlot; /* Time slot to use for start of tx */
unsigned char clockSource; /* External or internal */
unsigned char framing; /* E1, T1 or J1 */
unsigned char structure; /* unframed, double, crc4, f4, f12, */
/* f24 f72 */
unsigned char interface; /* rj48c or bnc */
unsigned char coding; /* hdb3 b8zs */
unsigned char lineBuildOut; /* 0, -7.5, -15, -22 */
unsigned char equalizer; /* short or lon haul settings */
unsigned char loopMode; /* various loopbacks */
unsigned char range; /* cable lengths */
unsigned char txBufferMode; /* tx elastic buffer depth */
unsigned char rxBufferMode; /* rx elastic buffer depth */
unsigned char losThreshold; /* Attenuation on LOS signal */
unsigned char idleCode; /* Value to send as idle timeslot */
unsigned int receiveBufferDelay; /* delay thro rx buffer timeslots */
unsigned int framingErrorCount; /* framing errors */
unsigned int codeViolationCount; /* code violations */
unsigned int crcErrorCount; /* CRC errors */
int lineAttenuation; /* in dB*/
unsigned short lossOfSignal;
unsigned short receiveRemoteAlarm;
unsigned short alarmIndicationSignal;
}; };
/* "valid" bitmask */ /* "valid" bitmask */
...@@ -131,13 +162,23 @@ struct fstioc_info { ...@@ -131,13 +162,23 @@ struct fstioc_info {
*/ */
#define FSTVAL_PROTO 0x00000200 /* proto */ #define FSTVAL_PROTO 0x00000200 /* proto */
#define FSTVAL_MODE 0x00000400 /* cardMode */ #define FSTVAL_MODE 0x00000400 /* cardMode */
#define FSTVAL_PHASE 0x00000800 /* Clock phase */
#define FSTVAL_TE1 0x00001000 /* T1E1 Configuration */
#define FSTVAL_DEBUG 0x80000000 /* debug */ #define FSTVAL_DEBUG 0x80000000 /* debug */
#define FSTVAL_ALL 0x000007FF /* Note: does not include DEBUG flag */ #define FSTVAL_ALL 0x00001FFF /* Note: does not include DEBUG flag */
/* "type" */ /* "type" */
#define FST_TYPE_NONE 0 /* Probably should never happen */ #define FST_TYPE_NONE 0 /* Probably should never happen */
#define FST_TYPE_T2P 1 /* T2P X21 2 port card */ #define FST_TYPE_T2P 1 /* T2P X21 2 port card */
#define FST_TYPE_T4P 2 /* T4P X21 4 port card */ #define FST_TYPE_T4P 2 /* T4P X21 4 port card */
#define FST_TYPE_T1U 3 /* T1U X21 1 port card */
#define FST_TYPE_T2U 4 /* T2U X21 2 port card */
#define FST_TYPE_T4U 5 /* T4U X21 4 port card */
#define FST_TYPE_TE1 6 /* T1E1 X21 1 port card */
/* "family" */
#define FST_FAMILY_TXP 0 /* T2P or T4P */
#define FST_FAMILY_TXU 1 /* T1U or T2U or T4U */
/* "state" */ /* "state" */
#define FST_UNINIT 0 /* Raw uninitialised state following #define FST_UNINIT 0 /* Raw uninitialised state following
...@@ -155,6 +196,10 @@ struct fstioc_info { ...@@ -155,6 +196,10 @@ struct fstioc_info {
#define V24 1 #define V24 1
#define X21 2 #define X21 2
#define V35 3 #define V35 3
#define X21D 4
#define T1 5
#define E1 6
#define J1 7
/* "proto" */ /* "proto" */
#define FST_HDLC 1 /* Cisco compatible HDLC */ #define FST_HDLC 1 /* Cisco compatible HDLC */
...@@ -187,6 +232,97 @@ struct fstioc_info { ...@@ -187,6 +232,97 @@ struct fstioc_info {
/* "cardMode" bitmask */ /* "cardMode" bitmask */
#define CARD_MODE_IDENTIFY 0x0001 #define CARD_MODE_IDENTIFY 0x0001
/*
* Constants for T1/E1 configuration
*/
/*
* Clock source
*/
#define CLOCKING_SLAVE 0
#define CLOCKING_MASTER 1
/*
* Framing
*/
#define FRAMING_E1 0
#define FRAMING_J1 1
#define FRAMING_T1 2
/*
* Structure
*/
#define STRUCTURE_UNFRAMED 0
#define STRUCTURE_E1_DOUBLE 1
#define STRUCTURE_E1_CRC4 2
#define STRUCTURE_E1_CRC4M 3
#define STRUCTURE_T1_4 4
#define STRUCTURE_T1_12 5
#define STRUCTURE_T1_24 6
#define STRUCTURE_T1_72 7
/*
* Interface
*/
#define INTERFACE_RJ48C 0
#define INTERFACE_BNC 1
/*
* Coding
*/
#define CODING_HDB3 0
#define CODING_NRZ 1
#define CODING_CMI 2
#define CODING_CMI_HDB3 3
#define CODING_CMI_B8ZS 4
#define CODING_AMI 5
#define CODING_AMI_ZCS 6
#define CODING_B8ZS 7
/*
* Line Build Out
*/
#define LBO_0dB 0
#define LBO_7dB5 1
#define LBO_15dB 2
#define LBO_22dB5 3
/*
* Range for long haul t1 > 655ft
*/
#define RANGE_0_133_FT 0
#define RANGE_0_40_M RANGE_0_133_FT
#define RANGE_133_266_FT 1
#define RANGE_40_81_M RANGE_133_266_FT
#define RANGE_266_399_FT 2
#define RANGE_81_122_M RANGE_266_399_FT
#define RANGE_399_533_FT 3
#define RANGE_122_162_M RANGE_399_533_FT
#define RANGE_533_655_FT 4
#define RANGE_162_200_M RANGE_533_655_FT
/*
* Receive Equaliser
*/
#define EQUALIZER_SHORT 0
#define EQUALIZER_LONG 1
/*
* Loop modes
*/
#define LOOP_NONE 0
#define LOOP_LOCAL 1
#define LOOP_PAYLOAD_EXC_TS0 2
#define LOOP_PAYLOAD_INC_TS0 3
#define LOOP_REMOTE 4
/*
* Buffer modes
*/
#define BUFFER_2_FRAME 0
#define BUFFER_1_FRAME 1
#define BUFFER_96_BIT 2
#define BUFFER_NONE 3
/* Debug support /* Debug support
* *
......
include/linux/if.h
View file @ ee86da9d
...@@ -63,6 +63,7 @@ ...@@ -63,6 +63,7 @@
#define IF_IFACE_T1 0x1003 /* T1 telco serial interface */ #define IF_IFACE_T1 0x1003 /* T1 telco serial interface */
#define IF_IFACE_E1 0x1004 /* E1 telco serial interface */ #define IF_IFACE_E1 0x1004 /* E1 telco serial interface */
#define IF_IFACE_SYNC_SERIAL 0x1005 /* can't be set by software */ #define IF_IFACE_SYNC_SERIAL 0x1005 /* can't be set by software */
#define IF_IFACE_X21D 0x1006 /* X.21 Dual Clocking (FarSite) */
/* For definitions see hdlc.h */ /* For definitions see hdlc.h */
#define IF_PROTO_HDLC 0x2000 /* raw HDLC protocol */ #define IF_PROTO_HDLC 0x2000 /* raw HDLC protocol */
...@@ -77,6 +78,7 @@ ...@@ -77,6 +78,7 @@
#define IF_PROTO_FR_DEL_ETH_PVC 0x2009 /* Delete FR Ethernet-bridged PVC */ #define IF_PROTO_FR_DEL_ETH_PVC 0x2009 /* Delete FR Ethernet-bridged PVC */
#define IF_PROTO_FR_PVC 0x200A /* for reading PVC status */ #define IF_PROTO_FR_PVC 0x200A /* for reading PVC status */
#define IF_PROTO_FR_ETH_PVC 0x200B #define IF_PROTO_FR_ETH_PVC 0x200B
#define IF_PROTO_RAW 0x200C /* RAW Socket */
/* /*
......
include/linux/pci_ids.h
View file @ ee86da9d
...@@ -1886,6 +1886,15 @@ ...@@ -1886,6 +1886,15 @@
#define PCI_DEVICE_ID_MACROLINK_MCCR8 0x2000 #define PCI_DEVICE_ID_MACROLINK_MCCR8 0x2000
#define PCI_DEVICE_ID_MACROLINK_MCCR 0x2001 #define PCI_DEVICE_ID_MACROLINK_MCCR 0x2001
#define PCI_VENDOR_ID_FARSITE 0x1619
#define PCI_DEVICE_ID_FARSITE_T2P 0x0400
#define PCI_DEVICE_ID_FARSITE_T4P 0x0440
#define PCI_DEVICE_ID_FARSITE_T1U 0x0610
#define PCI_DEVICE_ID_FARSITE_T2U 0x0620
#define PCI_DEVICE_ID_FARSITE_T4U 0x0640
#define PCI_DEVICE_ID_FARSITE_TE1 0x1610
#define PCI_DEVICE_ID_FARSITE_TE1C 0x1612
#define PCI_VENDOR_ID_ALTIMA 0x173b #define PCI_VENDOR_ID_ALTIMA 0x173b
#define PCI_DEVICE_ID_ALTIMA_AC1000 0x03e8 #define PCI_DEVICE_ID_ALTIMA_AC1000 0x03e8
#define PCI_DEVICE_ID_ALTIMA_AC1001 0x03e9 #define PCI_DEVICE_ID_ALTIMA_AC1001 0x03e9
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7