Commit ef78e5b7 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull scheduler fixes from Ingo Molnar:
 "Misc fixes all over the place:

   - Fix NUMA over-balancing between lightly loaded nodes. This is
     fallout of the big load-balancer rewrite.

   - Fix the NOHZ remote loadavg update logic, which fixes anomalies
     like reported 150 loadavg on mostly idle CPUs.

   - Fix XFS performance/scalability

   - Fix throttled groups unbound task-execution bug

   - Fix PSI procfs boundary condition

   - Fix the cpu.uclamp.{min,max} cgroup configuration write checks

   - Fix DocBook annotations

   - Fix RCU annotations

   - Fix overly CPU-intensive housekeeper CPU logic loop on large CPU
     counts"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Fix kernel-doc warning in attach_entity_load_avg()
  sched/core: Annotate curr pointer in rq with __rcu
  sched/psi: Fix OOB write when writing 0 bytes to PSI files
  sched/fair: Allow a per-CPU kthread waking a task to stack on the same CPU, to fix XFS performance regression
  sched/fair: Prevent unlimited runtime on throttled group
  sched/nohz: Optimize get_nohz_timer_target()
  sched/uclamp: Reject negative values in cpu_uclamp_write()
  sched/fair: Allow a small load imbalance between low utilisation SD_NUMA domains
  timers/nohz: Update NOHZ load in remote tick
  sched/core: Don't skip remote tick for idle CPUs
parents da99f935 e9f5490c
......@@ -15,9 +15,11 @@ static inline void nohz_balance_enter_idle(int cpu) { }
#ifdef CONFIG_NO_HZ_COMMON
void calc_load_nohz_start(void);
void calc_load_nohz_remote(struct rq *rq);
void calc_load_nohz_stop(void);
#else
static inline void calc_load_nohz_start(void) { }
static inline void calc_load_nohz_remote(struct rq *rq) { }
static inline void calc_load_nohz_stop(void) { }
#endif /* CONFIG_NO_HZ_COMMON */
......
......@@ -552,27 +552,32 @@ void resched_cpu(int cpu)
*/
int get_nohz_timer_target(void)
{
int i, cpu = smp_processor_id();
int i, cpu = smp_processor_id(), default_cpu = -1;
struct sched_domain *sd;
if (!idle_cpu(cpu) && housekeeping_cpu(cpu, HK_FLAG_TIMER))
if (housekeeping_cpu(cpu, HK_FLAG_TIMER)) {
if (!idle_cpu(cpu))
return cpu;
default_cpu = cpu;
}
rcu_read_lock();
for_each_domain(cpu, sd) {
for_each_cpu(i, sched_domain_span(sd)) {
for_each_cpu_and(i, sched_domain_span(sd),
housekeeping_cpumask(HK_FLAG_TIMER)) {
if (cpu == i)
continue;
if (!idle_cpu(i) && housekeeping_cpu(i, HK_FLAG_TIMER)) {
if (!idle_cpu(i)) {
cpu = i;
goto unlock;
}
}
}
if (!housekeeping_cpu(cpu, HK_FLAG_TIMER))
cpu = housekeeping_any_cpu(HK_FLAG_TIMER);
if (default_cpu == -1)
default_cpu = housekeeping_any_cpu(HK_FLAG_TIMER);
cpu = default_cpu;
unlock:
rcu_read_unlock();
return cpu;
......@@ -1442,17 +1447,6 @@ void check_preempt_curr(struct rq *rq, struct task_struct *p, int flags)
#ifdef CONFIG_SMP
static inline bool is_per_cpu_kthread(struct task_struct *p)
{
if (!(p->flags & PF_KTHREAD))
return false;
if (p->nr_cpus_allowed != 1)
return false;
return true;
}
/*
* Per-CPU kthreads are allowed to run on !active && online CPUs, see
* __set_cpus_allowed_ptr() and select_fallback_rq().
......@@ -3669,28 +3663,32 @@ static void sched_tick_remote(struct work_struct *work)
* statistics and checks timeslices in a time-independent way, regardless
* of when exactly it is running.
*/
if (idle_cpu(cpu) || !tick_nohz_tick_stopped_cpu(cpu))
if (!tick_nohz_tick_stopped_cpu(cpu))
goto out_requeue;
rq_lock_irq(rq, &rf);
curr = rq->curr;
if (is_idle_task(curr) || cpu_is_offline(cpu))
if (cpu_is_offline(cpu))
goto out_unlock;
curr = rq->curr;
update_rq_clock(rq);
delta = rq_clock_task(rq) - curr->se.exec_start;
if (!is_idle_task(curr)) {
/*
* Make sure the next tick runs within a reasonable
* amount of time.
*/
delta = rq_clock_task(rq) - curr->se.exec_start;
WARN_ON_ONCE(delta > (u64)NSEC_PER_SEC * 3);
}
curr->sched_class->task_tick(rq, curr, 0);
calc_load_nohz_remote(rq);
out_unlock:
rq_unlock_irq(rq, &rf);
out_requeue:
/*
* Run the remote tick once per second (1Hz). This arbitrary
* frequency is large enough to avoid overload but short enough
......@@ -7063,8 +7061,15 @@ void sched_move_task(struct task_struct *tsk)
if (queued)
enqueue_task(rq, tsk, queue_flags);
if (running)
if (running) {
set_next_task(rq, tsk);
/*
* After changing group, the running task may have joined a
* throttled one but it's still the running task. Trigger a
* resched to make sure that task can still run.
*/
resched_curr(rq);
}
task_rq_unlock(rq, tsk, &rf);
}
......@@ -7260,7 +7265,7 @@ capacity_from_percent(char *buf)
&req.percent);
if (req.ret)
return req;
if (req.percent > UCLAMP_PERCENT_SCALE) {
if ((u64)req.percent > UCLAMP_PERCENT_SCALE) {
req.ret = -ERANGE;
return req;
}
......
......@@ -3516,7 +3516,6 @@ update_cfs_rq_load_avg(u64 now, struct cfs_rq *cfs_rq)
* attach_entity_load_avg - attach this entity to its cfs_rq load avg
* @cfs_rq: cfs_rq to attach to
* @se: sched_entity to attach
* @flags: migration hints
*
* Must call update_cfs_rq_load_avg() before this, since we rely on
* cfs_rq->avg.last_update_time being current.
......@@ -5912,6 +5911,20 @@ static int select_idle_sibling(struct task_struct *p, int prev, int target)
(available_idle_cpu(prev) || sched_idle_cpu(prev)))
return prev;
/*
* Allow a per-cpu kthread to stack with the wakee if the
* kworker thread and the tasks previous CPUs are the same.
* The assumption is that the wakee queued work for the
* per-cpu kthread that is now complete and the wakeup is
* essentially a sync wakeup. An obvious example of this
* pattern is IO completions.
*/
if (is_per_cpu_kthread(current) &&
prev == smp_processor_id() &&
this_rq()->nr_running <= 1) {
return prev;
}
/* Check a recently used CPU as a potential idle candidate: */
recent_used_cpu = p->recent_used_cpu;
if (recent_used_cpu != prev &&
......@@ -8658,10 +8671,6 @@ static inline void calculate_imbalance(struct lb_env *env, struct sd_lb_stats *s
/*
* Try to use spare capacity of local group without overloading it or
* emptying busiest.
* XXX Spreading tasks across NUMA nodes is not always the best policy
* and special care should be taken for SD_NUMA domain level before
* spreading the tasks. For now, load_balance() fully relies on
* NUMA_BALANCING and fbq_classify_group/rq to override the decision.
*/
if (local->group_type == group_has_spare) {
if (busiest->group_type > group_fully_busy) {
......@@ -8701,8 +8710,7 @@ static inline void calculate_imbalance(struct lb_env *env, struct sd_lb_stats *s
env->migration_type = migrate_task;
lsub_positive(&nr_diff, local->sum_nr_running);
env->imbalance = nr_diff >> 1;
return;
}
} else {
/*
* If there is no overload, we just want to even the number of
......@@ -8711,6 +8719,28 @@ static inline void calculate_imbalance(struct lb_env *env, struct sd_lb_stats *s
env->migration_type = migrate_task;
env->imbalance = max_t(long, 0, (local->idle_cpus -
busiest->idle_cpus) >> 1);
}
/* Consider allowing a small imbalance between NUMA groups */
if (env->sd->flags & SD_NUMA) {
unsigned int imbalance_min;
/*
* Compute an allowed imbalance based on a simple
* pair of communicating tasks that should remain
* local and ignore them.
*
* NOTE: Generally this would have been based on
* the domain size and this was evaluated. However,
* the benefit is similar across a range of workloads
* and machines but scaling by the domain size adds
* the risk that lower domains have to be rebalanced.
*/
imbalance_min = 2;
if (busiest->sum_nr_running <= imbalance_min)
env->imbalance = 0;
}
return;
}
......
......@@ -231,16 +231,11 @@ static inline int calc_load_read_idx(void)
return calc_load_idx & 1;
}
void calc_load_nohz_start(void)
static void calc_load_nohz_fold(struct rq *rq)
{
struct rq *this_rq = this_rq();
long delta;
/*
* We're going into NO_HZ mode, if there's any pending delta, fold it
* into the pending NO_HZ delta.
*/
delta = calc_load_fold_active(this_rq, 0);
delta = calc_load_fold_active(rq, 0);
if (delta) {
int idx = calc_load_write_idx();
......@@ -248,6 +243,24 @@ void calc_load_nohz_start(void)
}
}
void calc_load_nohz_start(void)
{
/*
* We're going into NO_HZ mode, if there's any pending delta, fold it
* into the pending NO_HZ delta.
*/
calc_load_nohz_fold(this_rq());
}
/*
* Keep track of the load for NOHZ_FULL, must be called between
* calc_load_nohz_{start,stop}().
*/
void calc_load_nohz_remote(struct rq *rq)
{
calc_load_nohz_fold(rq);
}
void calc_load_nohz_stop(void)
{
struct rq *this_rq = this_rq();
......@@ -268,7 +281,7 @@ void calc_load_nohz_stop(void)
this_rq->calc_load_update += LOAD_FREQ;
}
static long calc_load_nohz_fold(void)
static long calc_load_nohz_read(void)
{
int idx = calc_load_read_idx();
long delta = 0;
......@@ -323,7 +336,7 @@ static void calc_global_nohz(void)
}
#else /* !CONFIG_NO_HZ_COMMON */
static inline long calc_load_nohz_fold(void) { return 0; }
static inline long calc_load_nohz_read(void) { return 0; }
static inline void calc_global_nohz(void) { }
#endif /* CONFIG_NO_HZ_COMMON */
......@@ -346,7 +359,7 @@ void calc_global_load(unsigned long ticks)
/*
* Fold the 'old' NO_HZ-delta to include all NO_HZ CPUs.
*/
delta = calc_load_nohz_fold();
delta = calc_load_nohz_read();
if (delta)
atomic_long_add(delta, &calc_load_tasks);
......
......@@ -1199,6 +1199,9 @@ static ssize_t psi_write(struct file *file, const char __user *user_buf,
if (static_branch_likely(&psi_disabled))
return -EOPNOTSUPP;
if (!nbytes)
return -EINVAL;
buf_size = min(nbytes, sizeof(buf));
if (copy_from_user(buf, user_buf, buf_size))
return -EFAULT;
......
......@@ -896,7 +896,7 @@ struct rq {
*/
unsigned long nr_uninterruptible;
struct task_struct *curr;
struct task_struct __rcu *curr;
struct task_struct *idle;
struct task_struct *stop;
unsigned long next_balance;
......@@ -2479,3 +2479,16 @@ static inline void membarrier_switch_mm(struct rq *rq,
{
}
#endif
#ifdef CONFIG_SMP
static inline bool is_per_cpu_kthread(struct task_struct *p)
{
if (!(p->flags & PF_KTHREAD))
return false;
if (p->nr_cpus_allowed != 1)
return false;
return true;
}
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment