Commit efdbd734 authored by Rob Herring's avatar Rob Herring

dt-bindings: consolidate display related bindings

This is a quite large renaming to consolidate display related bindings
into a single "display" directory from various scattered locations of
video, drm, gpu, fb, mipi, and panel. The prior location was somewhat
based on the Linux driver location, but bindings should be independent
of that.
Signed-off-by: default avatarRob Herring <robh@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
parent 9ffecb10
......@@ -14,8 +14,8 @@ Required properties:
-port@[X]: SoC specific port nodes with endpoint definitions as defined
in Documentation/devicetree/bindings/media/video-interfaces.txt,
please refer to the SoC specific binding document:
* Documentation/devicetree/bindings/drm/imx/hdmi.txt
* Documentation/devicetree/bindings/video/dw_hdmi-rockchip.txt
* Documentation/devicetree/bindings/display/imx/hdmi.txt
* Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt
Optional properties
- reg-io-width: the width of the reg:1,4, default set to 1 if not present
......
......@@ -6,7 +6,7 @@ Required properties:
location and size of the framebuffer memory.
- clocks : phandle + clock specifier pair of the FB reference clock.
- display : phandle to a display node as described in
Documentation/devicetree/bindings/video/display-timing.txt.
Documentation/devicetree/bindings/display/display-timing.txt.
Additionally, the display node has to define properties:
- bits-per-pixel: Bits per pixel.
- ac-prescale : LCD AC bias frequency. This frequency is the required
......
......@@ -38,7 +38,7 @@ Optional Properties:
Can be used in case timings cannot be provided otherwise
or to override timings provided by the panel.
[1]: Documentation/devicetree/bindings/video/display-timing.txt
[1]: Documentation/devicetree/bindings/display/display-timing.txt
Example:
......
......@@ -50,7 +50,7 @@ Required properties for dp-controller:
number of lanes supported by the panel.
LANE_COUNT1 = 1, LANE_COUNT2 = 2, LANE_COUNT4 = 4
- display-timings: timings for the connected panel as described by
Documentation/devicetree/bindings/video/display-timing.txt
Documentation/devicetree/bindings/display/display-timing.txt
Optional properties for dp-controller:
-interlaced:
......
......@@ -49,7 +49,7 @@ Video interfaces:
mode
- samsung,esc-clock-frequency: specifies DSI frequency in escape mode
[1]: Documentation/devicetree/bindings/mipi/dsi/mipi-dsi-bus.txt
[1]: Documentation/devicetree/bindings/display/mipi-dsi-bus.txt
[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
Example:
......
......@@ -82,7 +82,7 @@ in [2]. The following are properties specific to those nodes:
3 - for parallel output,
4 - for write-back interface
[1]: Documentation/devicetree/bindings/video/display-timing.txt
[1]: Documentation/devicetree/bindings/display/display-timing.txt
[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
Example:
......
......@@ -9,7 +9,7 @@ Required properties:
Required nodes:
- display: Phandle to a display node as described in
Documentation/devicetree/bindings/video/display-timing.txt
Documentation/devicetree/bindings/display/display-timing.txt
Additional, the display node has to define properties:
- bits-per-pixel: Bits per pixel
- fsl,pcr: LCDC PCR value
......
......@@ -63,7 +63,7 @@ Required properties:
Optional properties (required if display-timings are used):
- display-timings : A node that describes the display timings as defined in
Documentation/devicetree/bindings/video/display-timing.txt.
Documentation/devicetree/bindings/display/display-timing.txt.
- fsl,data-mapping : should be "spwg" or "jeida"
This describes how the color bits are laid out in the
serialized LVDS signal.
......
......@@ -28,7 +28,7 @@ Required properties:
Optional properties:
- panel@0: Node of panel connected to this DSI controller.
See files in Documentation/devicetree/bindings/panel/ for each supported
See files in Documentation/devicetree/bindings/display/panel/ for each supported
panel.
- qcom,dual-dsi-mode: Boolean value indicating if the DSI controller is
driving a panel which needs 2 DSI links.
......
......@@ -10,7 +10,7 @@ Optional properties:
Required nodes:
- "panel-timing" containing video timings
(Documentation/devicetree/bindings/video/display-timing.txt)
(Documentation/devicetree/bindings/display/display-timing.txt)
- Video port for DPI input
Example
......
......@@ -20,7 +20,7 @@ The device node can contain one 'port' child node with one child
'endpoint' node, according to the bindings defined in [3]. This
node should describe panel's video bus.
[1]: Documentation/devicetree/bindings/video/display-timing.txt
[1]: Documentation/devicetree/bindings/display/display-timing.txt
[2]: Documentation/devicetree/bindings/spi/spi-bus.txt
[3]: Documentation/devicetree/bindings/media/video-interfaces.txt
......
......@@ -21,7 +21,7 @@ The device node can contain one 'port' child node with one child
'endpoint' node, according to the bindings defined in [2]. This
node should describe panel's video bus.
[1]: Documentation/devicetree/bindings/video/display-timing.txt
[1]: Documentation/devicetree/bindings/display/display-timing.txt
[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
Example:
......
......@@ -9,7 +9,7 @@ Required properties:
- compatible: Should be "rockchip,display-subsystem"
- ports: Should contain a list of phandles pointing to display interface port
of vop devices. vop definitions as defined in
Documentation/devicetree/bindings/video/rockchip-vop.txt
Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt
example:
......
......@@ -184,7 +184,7 @@ of the following host1x client modules:
- avdd-dsi-supply: phandle of a supply that powers the DSI controller
- nvidia,mipi-calibrate: Should contain a phandle and a specifier specifying
which pads are used by this DSI output and need to be calibrated. See also
../mipi/nvidia,tegra114-mipi.txt.
../display/tegra/nvidia,tegra114-mipi.txt.
Optional properties:
- nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
......
Texas Instruments DRA7x Display Subsystem
=========================================
See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic
See Documentation/devicetree/bindings/display/ti/ti,omap-dss.txt for generic
description about OMAP Display Subsystem bindings.
DSS Core
......
Texas Instruments OMAP2 Display Subsystem
=========================================
See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic
See Documentation/devicetree/bindings/display/ti/ti,omap-dss.txt for generic
description about OMAP Display Subsystem bindings.
DSS Core
......
Texas Instruments OMAP3 Display Subsystem
=========================================
See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic
See Documentation/devicetree/bindings/display/ti/ti,omap-dss.txt for generic
description about OMAP Display Subsystem bindings.
DSS Core
......
Texas Instruments OMAP4 Display Subsystem
=========================================
See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic
See Documentation/devicetree/bindings/display/ti/ti,omap-dss.txt for generic
description about OMAP Display Subsystem bindings.
DSS Core
......
Texas Instruments OMAP5 Display Subsystem
=========================================
See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic
See Documentation/devicetree/bindings/display/ti/ti,omap-dss.txt for generic
description about OMAP Display Subsystem bindings.
DSS Core
......
......@@ -15,7 +15,7 @@ Required properties:
- display-timings: typical videomode of lcd panel. Multiple video modes
can be listed if the panel supports multiple timings, but the 'native-mode'
should be the preferred/default resolution. Refer to
Documentation/devicetree/bindings/video/display-timing.txt for display
Documentation/devicetree/bindings/display/display-timing.txt for display
timing binding details.
Optional properties:
......
......@@ -15,7 +15,7 @@ Required properties:
The HLCDC IP exposes two subdevices:
- a PWM chip: see ../pwm/atmel-hlcdc-pwm.txt
- a Display Controller: see ../drm/atmel-hlcdc-dc.txt
- a Display Controller: see ../display/atmel-hlcdc-dc.txt
Example:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment