tpm/st33zp24: drop unneeded over-commenting

Remove parameter descriptions from all static functions.
Remove the comment altogether that does not tell what the function does.
Suggested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

drivers/char/tpm/st33zp24/st33zp24.c

@@ -61,9 +61,7 @@ enum tis_defaults {
 };
 
 /*
- * clear_interruption clear the pending interrupt.
- * @param: tpm_dev, the tpm device device.
- * @return: the interrupt status value.
+ * clear the pending interrupt.
  */
 static u8 clear_interruption(struct st33zp24_dev *tpm_dev)
 {
@@ -72,12 +70,10 @@ static u8 clear_interruption(struct st33zp24_dev *tpm_dev)
 	tpm_dev->ops->recv(tpm_dev->phy_id, TPM_INT_STATUS, &interrupt, 1);
 	tpm_dev->ops->send(tpm_dev->phy_id, TPM_INT_STATUS, &interrupt, 1);
 	return interrupt;
-} /* clear_interruption() */
+}
 
 /*
- * st33zp24_cancel, cancel the current command execution or
- * set STS to COMMAND READY.
- * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h
+ * cancel the current command execution or set STS to COMMAND READY.
  */
 static void st33zp24_cancel(struct tpm_chip *chip)
 {
@@ -86,12 +82,10 @@ static void st33zp24_cancel(struct tpm_chip *chip)
 
 	data = TPM_STS_COMMAND_READY;
 	tpm_dev->ops->send(tpm_dev->phy_id, TPM_STS, &data, 1);
-} /* st33zp24_cancel() */
+}
 
 /*
- * st33zp24_status return the TPM_STS register
- * @param: chip, the tpm chip description
- * @return: the TPM_STS register value.
+ * return the TPM_STS register
  */
 static u8 st33zp24_status(struct tpm_chip *chip)
 {
@@ -100,12 +94,10 @@ static u8 st33zp24_status(struct tpm_chip *chip)
 
 	tpm_dev->ops->recv(tpm_dev->phy_id, TPM_STS, &data, 1);
 	return data;
-} /* st33zp24_status() */
+}
 
 /*
- * check_locality if the locality is active
- * @param: chip, the tpm chip description
- * @return: true if LOCALITY0 is active, otherwise false
+ * if the locality is active
  */
 static bool check_locality(struct tpm_chip *chip)
 {
@@ -120,13 +112,8 @@ static bool check_locality(struct tpm_chip *chip)
 		return true;
 
 	return false;
-} /* check_locality() */
+}
 
-/*
- * request_locality request the TPM locality
- * @param: chip, the chip description
- * @return: the active locality or negative value.
- */
 static int request_locality(struct tpm_chip *chip)
 {
 	struct st33zp24_dev *tpm_dev = dev_get_drvdata(&chip->dev);
@@ -153,12 +140,8 @@ static int request_locality(struct tpm_chip *chip)
 
 	/* could not get locality */
 	return -EACCES;
-} /* request_locality() */
+}
 
-/*
- * release_locality release the active locality
- * @param: chip, the tpm chip description.
- */
 static void release_locality(struct tpm_chip *chip)
 {
 	struct st33zp24_dev *tpm_dev = dev_get_drvdata(&chip->dev);
@@ -171,8 +154,6 @@ static void release_locality(struct tpm_chip *chip)
 
 /*
  * get_burstcount return the burstcount value
- * @param: chip, the chip description
- * return: the burstcount or negative value.
  */
 static int get_burstcount(struct tpm_chip *chip)
 {
@@ -200,18 +181,8 @@ static int get_burstcount(struct tpm_chip *chip)
 		msleep(TPM_TIMEOUT);
 	} while (time_before(jiffies, stop));
 	return -EBUSY;
-} /* get_burstcount() */
-
+}
 
-/*
- * wait_for_tpm_stat_cond
- * @param: chip, chip description
- * @param: mask, expected mask value
- * @param: check_cancel, does the command expected to be canceled ?
- * @param: canceled, did we received a cancel request ?
- * @return: true if status == mask or if the command is canceled.
- * false in other cases.
- */
 static bool wait_for_tpm_stat_cond(struct tpm_chip *chip, u8 mask,
 				bool check_cancel, bool *canceled)
 {
@@ -228,13 +199,7 @@ static bool wait_for_tpm_stat_cond(struct tpm_chip *chip, u8 mask,
 }
 
 /*
- * wait_for_stat wait for a TPM_STS value
- * @param: chip, the tpm chip description
- * @param: mask, the value mask to wait
- * @param: timeout, the timeout
- * @param: queue, the wait queue.
- * @param: check_cancel, does the command can be cancelled ?
- * @return: the tpm status, 0 if success, -ETIME if timeout is reached.
+ * wait for a TPM_STS value
  */
 static int wait_for_stat(struct tpm_chip *chip, u8 mask, unsigned long timeout,
 			wait_queue_head_t *queue, bool check_cancel)
@@ -292,15 +257,8 @@ static int wait_for_stat(struct tpm_chip *chip, u8 mask, unsigned long timeout,
 	}
 
 	return -ETIME;
-} /* wait_for_stat() */
+}
 
-/*
- * recv_data receive data
- * @param: chip, the tpm chip description
- * @param: buf, the buffer where the data are received
- * @param: count, the number of data to receive
- * @return: the number of bytes read from TPM FIFO.
- */
 static int recv_data(struct tpm_chip *chip, u8 *buf, size_t count)
 {
 	struct st33zp24_dev *tpm_dev = dev_get_drvdata(&chip->dev);
@@ -325,12 +283,6 @@ static int recv_data(struct tpm_chip *chip, u8 *buf, size_t count)
 	return size;
 }
 
-/*
- * tpm_ioserirq_handler the serirq irq handler
- * @param: irq, the tpm chip description
- * @param: dev_id, the description of the chip
- * @return: the status of the handler.
- */
 static irqreturn_t tpm_ioserirq_handler(int irq, void *dev_id)
 {
 	struct tpm_chip *chip = dev_id;
@@ -341,16 +293,10 @@ static irqreturn_t tpm_ioserirq_handler(int irq, void *dev_id)
 	disable_irq_nosync(tpm_dev->irq);
 
 	return IRQ_HANDLED;
-} /* tpm_ioserirq_handler() */
+}
 
 /*
- * st33zp24_send send TPM commands through the I2C bus.
- *
- * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h
- * @param: buf,	the buffer to send.
- * @param: count, the number of bytes to send.
- * @return: In case of success the number of bytes sent.
- *			In other case, a < 0 value describing the issue.
+ * send TPM commands through the I2C bus.
  */
 static int st33zp24_send(struct tpm_chip *chip, unsigned char *buf,
 			 size_t len)
@@ -431,14 +377,6 @@ static int st33zp24_send(struct tpm_chip *chip, unsigned char *buf,
 	return ret;
 }
 
-/*
- * st33zp24_recv received TPM response through TPM phy.
- * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h.
- * @param: buf,	the buffer to store datas.
- * @param: count, the number of bytes to send.
- * @return: In case of success the number of bytes received.
- *	    In other case, a < 0 value describing the issue.
- */
 static int st33zp24_recv(struct tpm_chip *chip, unsigned char *buf,
 			    size_t count)
 {
@@ -478,12 +416,6 @@ static int st33zp24_recv(struct tpm_chip *chip, unsigned char *buf,
 	return size;
 }
 
-/*
- * st33zp24_req_canceled
- * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h.
- * @param: status, the TPM status.
- * @return: Does TPM ready to compute a new command ? true.
- */
 static bool st33zp24_req_canceled(struct tpm_chip *chip, u8 status)
 {
 	return (status == TPM_STS_COMMAND_READY);
@@ -501,11 +433,7 @@ static const struct tpm_class_ops st33zp24_tpm = {
 };
 
 /*
- * st33zp24_probe initialize the TPM device
- * @param: client, the i2c_client description (TPM I2C description).
- * @param: id, the i2c_device_id struct.
- * @return: 0 in case of success.
- *	 -1 in other case.
+ * initialize the TPM device
  */
 int st33zp24_probe(void *phy_id, const struct st33zp24_phy_ops *ops,
 		   struct device *dev, int irq, int io_lpcpd)
@@ -583,11 +511,6 @@ int st33zp24_probe(void *phy_id, const struct st33zp24_phy_ops *ops,
 }
 EXPORT_SYMBOL(st33zp24_probe);
 
-/*
- * st33zp24_remove remove the TPM device
- * @param: tpm_data, the tpm phy.
- * @return: 0 in case of success.
- */
 int st33zp24_remove(struct tpm_chip *chip)
 {
 	tpm_chip_unregister(chip);
@@ -596,12 +519,6 @@ int st33zp24_remove(struct tpm_chip *chip)
 EXPORT_SYMBOL(st33zp24_remove);
 
 #ifdef CONFIG_PM_SLEEP
-/*
- * st33zp24_pm_suspend suspend the TPM device
- * @param: tpm_data, the tpm phy.
- * @param: mesg, the power management message.
- * @return: 0 in case of success.
- */
 int st33zp24_pm_suspend(struct device *dev)
 {
 	struct tpm_chip *chip = dev_get_drvdata(dev);
@@ -615,14 +532,9 @@ int st33zp24_pm_suspend(struct device *dev)
 		ret = tpm_pm_suspend(dev);
 
 	return ret;
-} /* st33zp24_pm_suspend() */
+}
 EXPORT_SYMBOL(st33zp24_pm_suspend);
 
-/*
- * st33zp24_pm_resume resume the TPM device
- * @param: tpm_data, the tpm phy.
- * @return: 0 in case of success.
- */
 int st33zp24_pm_resume(struct device *dev)
 {
 	struct tpm_chip *chip = dev_get_drvdata(dev);
@@ -640,7 +552,7 @@ int st33zp24_pm_resume(struct device *dev)
 			tpm1_do_selftest(chip);
 	}
 	return ret;
-} /* st33zp24_pm_resume() */
+}
 EXPORT_SYMBOL(st33zp24_pm_resume);
 #endif