habanalabs: set Goya CPU to use ASIC MMU

This patch configures the Goya CPU to actually go through the MMU for
translation. The configuration is done after the configuration of the
relevant MMU mappings.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drivers/misc/habanalabs/goya/goya.c

@@ -986,9 +986,9 @@ int goya_init_cpu_queues(struct hl_device *hdev)
 	WREG32(mmPSOC_GLOBAL_CONF_SCRATCHPAD_3, upper_32_bits(eq->bus_address));
 
 	WREG32(mmPSOC_GLOBAL_CONF_SCRATCHPAD_8,
-			lower_32_bits(hdev->cpu_accessible_dma_address));
+			lower_32_bits(VA_CPU_ACCESSIBLE_MEM_ADDR));
 	WREG32(mmPSOC_GLOBAL_CONF_SCRATCHPAD_9,
-			upper_32_bits(hdev->cpu_accessible_dma_address));
+			upper_32_bits(VA_CPU_ACCESSIBLE_MEM_ADDR));
 
 	WREG32(mmPSOC_GLOBAL_CONF_SCRATCHPAD_5, HL_QUEUE_SIZE_IN_BYTES);
 	WREG32(mmPSOC_GLOBAL_CONF_SCRATCHPAD_4, HL_EQ_SIZE_IN_BYTES);
@@ -3011,7 +3011,13 @@ static void goya_dma_pool_free(struct hl_device *hdev, void *vaddr,
 void *goya_cpu_accessible_dma_pool_alloc(struct hl_device *hdev, size_t size,
 					dma_addr_t *dma_handle)
 {
-	return hl_fw_cpu_accessible_dma_pool_alloc(hdev, size, dma_handle);
+	void *vaddr;
+
+	vaddr = hl_fw_cpu_accessible_dma_pool_alloc(hdev, size, dma_handle);
+	*dma_handle = (*dma_handle) - hdev->cpu_accessible_dma_address +
+			VA_CPU_ACCESSIBLE_MEM_ADDR;
+
+	return vaddr;
 }
 
 void goya_cpu_accessible_dma_pool_free(struct hl_device *hdev, size_t size,
@@ -4667,6 +4673,14 @@ static int goya_mmu_add_mappings_for_device_cpu(struct hl_device *hdev)
 		}
 	}
 
+	goya_mmu_prepare_reg(hdev, mmCPU_IF_ARUSER_OVR, HL_KERNEL_ASID_ID);
+	goya_mmu_prepare_reg(hdev, mmCPU_IF_AWUSER_OVR, HL_KERNEL_ASID_ID);
+	WREG32(mmCPU_IF_ARUSER_OVR_EN, 0x7FF);
+	WREG32(mmCPU_IF_AWUSER_OVR_EN, 0x7FF);
+
+	/* Make sure configuration is flushed to device */
+	RREG32(mmCPU_IF_AWUSER_OVR_EN);
+
 	goya->device_cpu_mmu_mappings_done = true;
 
 	return 0;
@@ -4702,6 +4716,9 @@ void goya_mmu_remove_device_cpu_mappings(struct hl_device *hdev)
 	if (!goya->device_cpu_mmu_mappings_done)
 		return;
 
+	WREG32(mmCPU_IF_ARUSER_OVR_EN, 0);
+	WREG32(mmCPU_IF_AWUSER_OVR_EN, 0);
+
 	if (!(hdev->cpu_accessible_dma_address & (PAGE_SIZE_2MB - 1))) {
 		if (hl_mmu_unmap(hdev->kernel_ctx, VA_CPU_ACCESSIBLE_MEM_ADDR,
 				PAGE_SIZE_2MB))