Commit f0cd0a34 authored by Eric Bernstein's avatar Eric Bernstein Committed by Alex Deucher

drm/amd/display: DCN1 link encoder

Create DCN1 link encoder files and update AUX and HPD register access.
Signed-off-by: default avatarEric Bernstein <eric.bernstein@amd.com>
Reviewed-by: default avatarTony Cheng <Tony.Cheng@amd.com>
Acked-by: default avatarHarry Wentland <harry.wentland@amd.com>
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
parent a944744b
......@@ -11,8 +11,6 @@
#include "dc_link_dp.h"
#include "dc_link_ddc.h"
#include "dm_helpers.h"
#include "dce/dce_link_encoder.h"
#include "dce/dce_stream_encoder.h"
#include "dpcd_defs.h"
enum dc_status core_link_read_dpcd(
......
......@@ -26,7 +26,7 @@ DCN10 = dcn10_resource.o dcn10_ipp.o dcn10_hw_sequencer.o \
dcn10_dpp.o dcn10_opp.o dcn10_optc.o \
dcn10_hubp.o dcn10_mpc.o \
dcn10_dpp_dscl.o dcn10_dpp_cm.o dcn10_cm_common.o \
dcn10_hubbub.o dcn10_stream_encoder.o
dcn10_hubbub.o dcn10_stream_encoder.o dcn10_link_encoder.o
AMD_DAL_DCN10 = $(addprefix $(AMDDALPATH)/dc/dcn10/,$(DCN10))
......
/*
* Copyright 2012-15 Advanced Micro Devices, Inc.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*
* Authors: AMD
*
*/
#include "reg_helper.h"
#include "core_types.h"
#include "link_encoder.h"
#include "dcn10_link_encoder.h"
#include "stream_encoder.h"
#include "i2caux_interface.h"
#include "dc_bios_types.h"
#include "gpio_service_interface.h"
#define CTX \
enc10->base.ctx
#define DC_LOGGER \
enc10->base.ctx->logger
#define REG(reg)\
(enc10->link_regs->reg)
#undef FN
#define FN(reg_name, field_name) \
enc10->link_shift->field_name, enc10->link_mask->field_name
/*
* @brief
* Trigger Source Select
* ASIC-dependent, actual values for register programming
*/
#define DCN10_DIG_FE_SOURCE_SELECT_INVALID 0x0
#define DCN10_DIG_FE_SOURCE_SELECT_DIGA 0x1
#define DCN10_DIG_FE_SOURCE_SELECT_DIGB 0x2
#define DCN10_DIG_FE_SOURCE_SELECT_DIGC 0x4
#define DCN10_DIG_FE_SOURCE_SELECT_DIGD 0x08
#define DCN10_DIG_FE_SOURCE_SELECT_DIGE 0x10
#define DCN10_DIG_FE_SOURCE_SELECT_DIGF 0x20
#define DCN10_DIG_FE_SOURCE_SELECT_DIGG 0x40
enum {
DP_MST_UPDATE_MAX_RETRY = 50
};
static void aux_initialize(struct dcn10_link_encoder *enc10);
static const struct link_encoder_funcs dcn10_lnk_enc_funcs = {
.validate_output_with_stream =
dcn10_link_encoder_validate_output_with_stream,
.hw_init = dcn10_link_encoder_hw_init,
.setup = dcn10_link_encoder_setup,
.enable_tmds_output = dcn10_link_encoder_enable_tmds_output,
.enable_dp_output = dcn10_link_encoder_enable_dp_output,
.enable_dp_mst_output = dcn10_link_encoder_enable_dp_mst_output,
.disable_output = dcn10_link_encoder_disable_output,
.dp_set_lane_settings = dcn10_link_encoder_dp_set_lane_settings,
.dp_set_phy_pattern = dcn10_link_encoder_dp_set_phy_pattern,
.update_mst_stream_allocation_table =
dcn10_link_encoder_update_mst_stream_allocation_table,
.psr_program_dp_dphy_fast_training =
dcn10_psr_program_dp_dphy_fast_training,
.psr_program_secondary_packet = dcn10_psr_program_secondary_packet,
.connect_dig_be_to_fe = dcn10_link_encoder_connect_dig_be_to_fe,
.enable_hpd = dcn10_link_encoder_enable_hpd,
.disable_hpd = dcn10_link_encoder_disable_hpd,
.is_dig_enabled = dcn10_is_dig_enabled,
.destroy = dcn10_link_encoder_destroy
};
static enum bp_result link_transmitter_control(
struct dcn10_link_encoder *enc10,
struct bp_transmitter_control *cntl)
{
enum bp_result result;
struct dc_bios *bp = enc10->base.ctx->dc_bios;
result = bp->funcs->transmitter_control(bp, cntl);
return result;
}
static void enable_phy_bypass_mode(
struct dcn10_link_encoder *enc10,
bool enable)
{
/* This register resides in DP back end block;
* transmitter is used for the offset
*/
REG_UPDATE(DP_DPHY_CNTL, DPHY_BYPASS, enable);
}
static void disable_prbs_symbols(
struct dcn10_link_encoder *enc10,
bool disable)
{
/* This register resides in DP back end block;
* transmitter is used for the offset
*/
REG_UPDATE_4(DP_DPHY_CNTL,
DPHY_ATEST_SEL_LANE0, disable,
DPHY_ATEST_SEL_LANE1, disable,
DPHY_ATEST_SEL_LANE2, disable,
DPHY_ATEST_SEL_LANE3, disable);
}
static void disable_prbs_mode(
struct dcn10_link_encoder *enc10)
{
REG_UPDATE(DP_DPHY_PRBS_CNTL, DPHY_PRBS_EN, 0);
}
static void program_pattern_symbols(
struct dcn10_link_encoder *enc10,
uint16_t pattern_symbols[8])
{
/* This register resides in DP back end block;
* transmitter is used for the offset
*/
REG_SET_3(DP_DPHY_SYM0, 0,
DPHY_SYM1, pattern_symbols[0],
DPHY_SYM2, pattern_symbols[1],
DPHY_SYM3, pattern_symbols[2]);
/* This register resides in DP back end block;
* transmitter is used for the offset
*/
REG_SET_3(DP_DPHY_SYM1, 0,
DPHY_SYM4, pattern_symbols[3],
DPHY_SYM5, pattern_symbols[4],
DPHY_SYM6, pattern_symbols[5]);
/* This register resides in DP back end block;
* transmitter is used for the offset
*/
REG_SET_2(DP_DPHY_SYM2, 0,
DPHY_SYM7, pattern_symbols[6],
DPHY_SYM8, pattern_symbols[7]);
}
static void set_dp_phy_pattern_d102(
struct dcn10_link_encoder *enc10)
{
/* Disable PHY Bypass mode to setup the test pattern */
enable_phy_bypass_mode(enc10, false);
/* For 10-bit PRBS or debug symbols
* please use the following sequence:
*
* Enable debug symbols on the lanes
*/
disable_prbs_symbols(enc10, true);
/* Disable PRBS mode */
disable_prbs_mode(enc10);
/* Program debug symbols to be output */
{
uint16_t pattern_symbols[8] = {
0x2AA, 0x2AA, 0x2AA, 0x2AA,
0x2AA, 0x2AA, 0x2AA, 0x2AA
};
program_pattern_symbols(enc10, pattern_symbols);
}
/* Enable phy bypass mode to enable the test pattern */
enable_phy_bypass_mode(enc10, true);
}
static void set_link_training_complete(
struct dcn10_link_encoder *enc10,
bool complete)
{
/* This register resides in DP back end block;
* transmitter is used for the offset
*/
REG_UPDATE(DP_LINK_CNTL, DP_LINK_TRAINING_COMPLETE, complete);
}
void dcn10_link_encoder_set_dp_phy_pattern_training_pattern(
struct link_encoder *enc,
uint32_t index)
{
struct dcn10_link_encoder *enc10 = TO_DCN10_LINK_ENC(enc);
/* Write Training Pattern */
REG_WRITE(DP_DPHY_TRAINING_PATTERN_SEL, index);
/* Set HW Register Training Complete to false */
set_link_training_complete(enc10, false);
/* Disable PHY Bypass mode to output Training Pattern */
enable_phy_bypass_mode(enc10, false);
/* Disable PRBS mode */
disable_prbs_mode(enc10);
}
static void setup_panel_mode(
struct dcn10_link_encoder *enc10,
enum dp_panel_mode panel_mode)
{
uint32_t value;
ASSERT(REG(DP_DPHY_INTERNAL_CTRL));
value = REG_READ(DP_DPHY_INTERNAL_CTRL);
switch (panel_mode) {
case DP_PANEL_MODE_EDP:
value = 0x1;
break;
case DP_PANEL_MODE_SPECIAL:
value = 0x11;
break;
default:
value = 0x0;
break;
}
REG_WRITE(DP_DPHY_INTERNAL_CTRL, value);
}
static void set_dp_phy_pattern_symbol_error(
struct dcn10_link_encoder *enc10)
{
/* Disable PHY Bypass mode to setup the test pattern */
enable_phy_bypass_mode(enc10, false);
/* program correct panel mode*/
setup_panel_mode(enc10, DP_PANEL_MODE_DEFAULT);
/* A PRBS23 pattern is used for most DP electrical measurements. */
/* Enable PRBS symbols on the lanes */
disable_prbs_symbols(enc10, false);
/* For PRBS23 Set bit DPHY_PRBS_SEL=1 and Set bit DPHY_PRBS_EN=1 */
REG_UPDATE_2(DP_DPHY_PRBS_CNTL,
DPHY_PRBS_SEL, 1,
DPHY_PRBS_EN, 1);
/* Enable phy bypass mode to enable the test pattern */
enable_phy_bypass_mode(enc10, true);
}
static void set_dp_phy_pattern_prbs7(
struct dcn10_link_encoder *enc10)
{
/* Disable PHY Bypass mode to setup the test pattern */
enable_phy_bypass_mode(enc10, false);
/* A PRBS7 pattern is used for most DP electrical measurements. */
/* Enable PRBS symbols on the lanes */
disable_prbs_symbols(enc10, false);
/* For PRBS7 Set bit DPHY_PRBS_SEL=0 and Set bit DPHY_PRBS_EN=1 */
REG_UPDATE_2(DP_DPHY_PRBS_CNTL,
DPHY_PRBS_SEL, 0,
DPHY_PRBS_EN, 1);
/* Enable phy bypass mode to enable the test pattern */
enable_phy_bypass_mode(enc10, true);
}
static void set_dp_phy_pattern_80bit_custom(
struct dcn10_link_encoder *enc10,
const uint8_t *pattern)
{
/* Disable PHY Bypass mode to setup the test pattern */
enable_phy_bypass_mode(enc10, false);
/* Enable debug symbols on the lanes */
disable_prbs_symbols(enc10, true);
/* Enable PHY bypass mode to enable the test pattern */
/* TODO is it really needed ? */
enable_phy_bypass_mode(enc10, true);
/* Program 80 bit custom pattern */
{
uint16_t pattern_symbols[8];
pattern_symbols[0] =
((pattern[1] & 0x03) << 8) | pattern[0];
pattern_symbols[1] =
((pattern[2] & 0x0f) << 6) | ((pattern[1] >> 2) & 0x3f);
pattern_symbols[2] =
((pattern[3] & 0x3f) << 4) | ((pattern[2] >> 4) & 0x0f);
pattern_symbols[3] =
(pattern[4] << 2) | ((pattern[3] >> 6) & 0x03);
pattern_symbols[4] =
((pattern[6] & 0x03) << 8) | pattern[5];
pattern_symbols[5] =
((pattern[7] & 0x0f) << 6) | ((pattern[6] >> 2) & 0x3f);
pattern_symbols[6] =
((pattern[8] & 0x3f) << 4) | ((pattern[7] >> 4) & 0x0f);
pattern_symbols[7] =
(pattern[9] << 2) | ((pattern[8] >> 6) & 0x03);
program_pattern_symbols(enc10, pattern_symbols);
}
/* Enable phy bypass mode to enable the test pattern */
enable_phy_bypass_mode(enc10, true);
}
static void set_dp_phy_pattern_hbr2_compliance_cp2520_2(
struct dcn10_link_encoder *enc10,
unsigned int cp2520_pattern)
{
/* previously there is a register DP_HBR2_EYE_PATTERN
* that is enabled to get the pattern.
* But it does not work with the latest spec change,
* so we are programming the following registers manually.
*
* The following settings have been confirmed
* by Nick Chorney and Sandra Liu
*/
/* Disable PHY Bypass mode to setup the test pattern */
enable_phy_bypass_mode(enc10, false);
/* Setup DIG encoder in DP SST mode */
enc10->base.funcs->setup(&enc10->base, SIGNAL_TYPE_DISPLAY_PORT);
/* ensure normal panel mode. */
setup_panel_mode(enc10, DP_PANEL_MODE_DEFAULT);
/* no vbid after BS (SR)
* DP_LINK_FRAMING_CNTL changed history Sandra Liu
* 11000260 / 11000104 / 110000FC
*/
REG_UPDATE_3(DP_LINK_FRAMING_CNTL,
DP_IDLE_BS_INTERVAL, 0xFC,
DP_VBID_DISABLE, 1,
DP_VID_ENHANCED_FRAME_MODE, 1);
/* swap every BS with SR */
REG_UPDATE(DP_DPHY_SCRAM_CNTL, DPHY_SCRAMBLER_BS_COUNT, 0);
/* select cp2520 patterns */
if (REG(DP_DPHY_HBR2_PATTERN_CONTROL))
REG_UPDATE(DP_DPHY_HBR2_PATTERN_CONTROL,
DP_DPHY_HBR2_PATTERN_CONTROL, cp2520_pattern);
else
/* pre-DCE11 can only generate CP2520 pattern 2 */
ASSERT(cp2520_pattern == 2);
/* set link training complete */
set_link_training_complete(enc10, true);
/* disable video stream */
REG_UPDATE(DP_VID_STREAM_CNTL, DP_VID_STREAM_ENABLE, 0);
/* Disable PHY Bypass mode to setup the test pattern */
enable_phy_bypass_mode(enc10, false);
}
static void set_dp_phy_pattern_passthrough_mode(
struct dcn10_link_encoder *enc10,
enum dp_panel_mode panel_mode)
{
/* program correct panel mode */
setup_panel_mode(enc10, panel_mode);
/* restore LINK_FRAMING_CNTL and DPHY_SCRAMBLER_BS_COUNT
* in case we were doing HBR2 compliance pattern before
*/
REG_UPDATE_3(DP_LINK_FRAMING_CNTL,
DP_IDLE_BS_INTERVAL, 0x2000,
DP_VBID_DISABLE, 0,
DP_VID_ENHANCED_FRAME_MODE, 1);
REG_UPDATE(DP_DPHY_SCRAM_CNTL, DPHY_SCRAMBLER_BS_COUNT, 0x1FF);
/* set link training complete */
set_link_training_complete(enc10, true);
/* Disable PHY Bypass mode to setup the test pattern */
enable_phy_bypass_mode(enc10, false);
/* Disable PRBS mode */
disable_prbs_mode(enc10);
}
/* return value is bit-vector */
static uint8_t get_frontend_source(
enum engine_id engine)
{
switch (engine) {
case ENGINE_ID_DIGA:
return DCN10_DIG_FE_SOURCE_SELECT_DIGA;
case ENGINE_ID_DIGB:
return DCN10_DIG_FE_SOURCE_SELECT_DIGB;
case ENGINE_ID_DIGC:
return DCN10_DIG_FE_SOURCE_SELECT_DIGC;
case ENGINE_ID_DIGD:
return DCN10_DIG_FE_SOURCE_SELECT_DIGD;
case ENGINE_ID_DIGE:
return DCN10_DIG_FE_SOURCE_SELECT_DIGE;
case ENGINE_ID_DIGF:
return DCN10_DIG_FE_SOURCE_SELECT_DIGF;
case ENGINE_ID_DIGG:
return DCN10_DIG_FE_SOURCE_SELECT_DIGG;
default:
ASSERT_CRITICAL(false);
return DCN10_DIG_FE_SOURCE_SELECT_INVALID;
}
}
static void configure_encoder(
struct dcn10_link_encoder *enc10,
const struct dc_link_settings *link_settings)
{
/* set number of lanes */
REG_SET(DP_CONFIG, 0,
DP_UDI_LANES, link_settings->lane_count - LANE_COUNT_ONE);
/* setup scrambler */
REG_UPDATE(DP_DPHY_SCRAM_CNTL, DPHY_SCRAMBLER_ADVANCE, 1);
}
void dcn10_psr_program_dp_dphy_fast_training(struct link_encoder *enc,
bool exit_link_training_required)
{
struct dcn10_link_encoder *enc10 = TO_DCN10_LINK_ENC(enc);
if (exit_link_training_required)
REG_UPDATE(DP_DPHY_FAST_TRAINING,
DPHY_RX_FAST_TRAINING_CAPABLE, 1);
else {
REG_UPDATE(DP_DPHY_FAST_TRAINING,
DPHY_RX_FAST_TRAINING_CAPABLE, 0);
/*In DCE 11, we are able to pre-program a Force SR register
* to be able to trigger SR symbol after 5 idle patterns
* transmitted. Upon PSR Exit, DMCU can trigger
* DPHY_LOAD_BS_COUNT_START = 1. Upon writing 1 to
* DPHY_LOAD_BS_COUNT_START and the internal counter
* reaches DPHY_LOAD_BS_COUNT, the next BS symbol will be
* replaced by SR symbol once.
*/
REG_UPDATE(DP_DPHY_BS_SR_SWAP_CNTL, DPHY_LOAD_BS_COUNT, 0x5);
}
}
void dcn10_psr_program_secondary_packet(struct link_encoder *enc,
unsigned int sdp_transmit_line_num_deadline)
{
struct dcn10_link_encoder *enc10 = TO_DCN10_LINK_ENC(enc);
REG_UPDATE_2(DP_SEC_CNTL1,
DP_SEC_GSP0_LINE_NUM, sdp_transmit_line_num_deadline,
DP_SEC_GSP0_PRIORITY, 1);
}
bool dcn10_is_dig_enabled(struct link_encoder *enc)
{
struct dcn10_link_encoder *enc10 = TO_DCN10_LINK_ENC(enc);
uint32_t value;
REG_GET(DIG_BE_EN_CNTL, DIG_ENABLE, &value);
return value;
}
static void link_encoder_disable(struct dcn10_link_encoder *enc10)
{
/* reset training pattern */
REG_SET(DP_DPHY_TRAINING_PATTERN_SEL, 0,
DPHY_TRAINING_PATTERN_SEL, 0);
/* reset training complete */
REG_UPDATE(DP_LINK_CNTL, DP_LINK_TRAINING_COMPLETE, 0);
/* reset panel mode */
setup_panel_mode(enc10, DP_PANEL_MODE_DEFAULT);
}
static void hpd_initialize(
struct dcn10_link_encoder *enc10)
{
/* Associate HPD with DIG_BE */
enum hpd_source_id hpd_source = enc10->base.hpd_source;
REG_UPDATE(DIG_BE_CNTL, DIG_HPD_SELECT, hpd_source);
}
bool dcn10_link_encoder_validate_dvi_output(
const struct dcn10_link_encoder *enc10,
enum signal_type connector_signal,
enum signal_type signal,
const struct dc_crtc_timing *crtc_timing)
{
uint32_t max_pixel_clock = TMDS_MAX_PIXEL_CLOCK;
if (signal == SIGNAL_TYPE_DVI_DUAL_LINK)
max_pixel_clock *= 2;
/* This handles the case of HDMI downgrade to DVI we don't want to
* we don't want to cap the pixel clock if the DDI is not DVI.
*/
if (connector_signal != SIGNAL_TYPE_DVI_DUAL_LINK &&
connector_signal != SIGNAL_TYPE_DVI_SINGLE_LINK)
max_pixel_clock = enc10->base.features.max_hdmi_pixel_clock;
/* DVI only support RGB pixel encoding */
if (crtc_timing->pixel_encoding != PIXEL_ENCODING_RGB)
return false;
/*connect DVI via adpater's HDMI connector*/
if ((connector_signal == SIGNAL_TYPE_DVI_SINGLE_LINK ||
connector_signal == SIGNAL_TYPE_HDMI_TYPE_A) &&
signal != SIGNAL_TYPE_HDMI_TYPE_A &&
crtc_timing->pix_clk_khz > TMDS_MAX_PIXEL_CLOCK)
return false;
if (crtc_timing->pix_clk_khz < TMDS_MIN_PIXEL_CLOCK)
return false;
if (crtc_timing->pix_clk_khz > max_pixel_clock)
return false;
/* DVI supports 6/8bpp single-link and 10/16bpp dual-link */
switch (crtc_timing->display_color_depth) {
case COLOR_DEPTH_666:
case COLOR_DEPTH_888:
break;
case COLOR_DEPTH_101010:
case COLOR_DEPTH_161616:
if (signal != SIGNAL_TYPE_DVI_DUAL_LINK)
return false;
break;
default:
return false;
}
return true;
}
static bool dcn10_link_encoder_validate_hdmi_output(
const struct dcn10_link_encoder *enc10,
const struct dc_crtc_timing *crtc_timing,
int adjusted_pix_clk_khz)
{
enum dc_color_depth max_deep_color =
enc10->base.features.max_hdmi_deep_color;
if (max_deep_color < crtc_timing->display_color_depth)
return false;
if (crtc_timing->display_color_depth < COLOR_DEPTH_888)
return false;
if (adjusted_pix_clk_khz < TMDS_MIN_PIXEL_CLOCK)
return false;
if ((adjusted_pix_clk_khz == 0) ||
(adjusted_pix_clk_khz > enc10->base.features.max_hdmi_pixel_clock))
return false;
/* DCE11 HW does not support 420 */
if (!enc10->base.features.ycbcr420_supported &&
crtc_timing->pixel_encoding == PIXEL_ENCODING_YCBCR420)
return false;
if (!enc10->base.features.flags.bits.HDMI_6GB_EN &&
adjusted_pix_clk_khz >= 300000)
return false;
return true;
}
bool dcn10_link_encoder_validate_dp_output(
const struct dcn10_link_encoder *enc10,
const struct dc_crtc_timing *crtc_timing)
{
/* default RGB only */
if (crtc_timing->pixel_encoding == PIXEL_ENCODING_RGB)
return true;
if (enc10->base.features.flags.bits.IS_YCBCR_CAPABLE)
return true;
/* for DCE 8.x or later DP Y-only feature,
* we need ASIC cap + FeatureSupportDPYonly, not support 666
*/
if (crtc_timing->flags.Y_ONLY &&
enc10->base.features.flags.bits.IS_YCBCR_CAPABLE &&
crtc_timing->display_color_depth != COLOR_DEPTH_666)
return true;
return false;
}
void dcn10_link_encoder_construct(
struct dcn10_link_encoder *enc10,
const struct encoder_init_data *init_data,
const struct encoder_feature_support *enc_features,
const struct dcn10_link_enc_registers *link_regs,
const struct dcn10_link_enc_aux_registers *aux_regs,
const struct dcn10_link_enc_hpd_registers *hpd_regs,
const struct dcn10_link_enc_shift *link_shift,
const struct dcn10_link_enc_mask *link_mask)
{
struct bp_encoder_cap_info bp_cap_info = {0};
const struct dc_vbios_funcs *bp_funcs = init_data->ctx->dc_bios->funcs;
enum bp_result result = BP_RESULT_OK;
enc10->base.funcs = &dcn10_lnk_enc_funcs;
enc10->base.ctx = init_data->ctx;
enc10->base.id = init_data->encoder;
enc10->base.hpd_source = init_data->hpd_source;
enc10->base.connector = init_data->connector;
enc10->base.preferred_engine = ENGINE_ID_UNKNOWN;
enc10->base.features = *enc_features;
enc10->base.transmitter = init_data->transmitter;
/* set the flag to indicate whether driver poll the I2C data pin
* while doing the DP sink detect
*/
/* if (dal_adapter_service_is_feature_supported(as,
FEATURE_DP_SINK_DETECT_POLL_DATA_PIN))
enc10->base.features.flags.bits.
DP_SINK_DETECT_POLL_DATA_PIN = true;*/
enc10->base.output_signals =
SIGNAL_TYPE_DVI_SINGLE_LINK |
SIGNAL_TYPE_DVI_DUAL_LINK |
SIGNAL_TYPE_LVDS |
SIGNAL_TYPE_DISPLAY_PORT |
SIGNAL_TYPE_DISPLAY_PORT_MST |
SIGNAL_TYPE_EDP |
SIGNAL_TYPE_HDMI_TYPE_A;
/* For DCE 8.0 and 8.1, by design, UNIPHY is hardwired to DIG_BE.
* SW always assign DIG_FE 1:1 mapped to DIG_FE for non-MST UNIPHY.
* SW assign DIG_FE to non-MST UNIPHY first and MST last. So prefer
* DIG is per UNIPHY and used by SST DP, eDP, HDMI, DVI and LVDS.
* Prefer DIG assignment is decided by board design.
* For DCE 8.0, there are only max 6 UNIPHYs, we assume board design
* and VBIOS will filter out 7 UNIPHY for DCE 8.0.
* By this, adding DIGG should not hurt DCE 8.0.
* This will let DCE 8.1 share DCE 8.0 as much as possible
*/
enc10->link_regs = link_regs;
enc10->aux_regs = aux_regs;
enc10->hpd_regs = hpd_regs;
enc10->link_shift = link_shift;
enc10->link_mask = link_mask;
switch (enc10->base.transmitter) {
case TRANSMITTER_UNIPHY_A:
enc10->base.preferred_engine = ENGINE_ID_DIGA;
break;
case TRANSMITTER_UNIPHY_B:
enc10->base.preferred_engine = ENGINE_ID_DIGB;
break;
case TRANSMITTER_UNIPHY_C:
enc10->base.preferred_engine = ENGINE_ID_DIGC;
break;
case TRANSMITTER_UNIPHY_D:
enc10->base.preferred_engine = ENGINE_ID_DIGD;
break;
case TRANSMITTER_UNIPHY_E:
enc10->base.preferred_engine = ENGINE_ID_DIGE;
break;
case TRANSMITTER_UNIPHY_F:
enc10->base.preferred_engine = ENGINE_ID_DIGF;
break;
case TRANSMITTER_UNIPHY_G:
enc10->base.preferred_engine = ENGINE_ID_DIGG;
break;
default:
ASSERT_CRITICAL(false);
enc10->base.preferred_engine = ENGINE_ID_UNKNOWN;
}
/* default to one to mirror Windows behavior */
enc10->base.features.flags.bits.HDMI_6GB_EN = 1;
result = bp_funcs->get_encoder_cap_info(enc10->base.ctx->dc_bios,
enc10->base.id, &bp_cap_info);
/* Override features with DCE-specific values */
if (result == BP_RESULT_OK) {
enc10->base.features.flags.bits.IS_HBR2_CAPABLE =
bp_cap_info.DP_HBR2_EN;
enc10->base.features.flags.bits.IS_HBR3_CAPABLE =
bp_cap_info.DP_HBR3_EN;
enc10->base.features.flags.bits.HDMI_6GB_EN = bp_cap_info.HDMI_6GB_EN;
} else {
DC_LOG_WARNING("%s: Failed to get encoder_cap_info from VBIOS with error code %d!\n",
__func__,
result);
}
}
bool dcn10_link_encoder_validate_output_with_stream(
struct link_encoder *enc,
const struct dc_stream_state *stream)
{
struct dcn10_link_encoder *enc10 = TO_DCN10_LINK_ENC(enc);
bool is_valid;
switch (stream->signal) {
case SIGNAL_TYPE_DVI_SINGLE_LINK:
case SIGNAL_TYPE_DVI_DUAL_LINK:
is_valid = dcn10_link_encoder_validate_dvi_output(
enc10,
stream->sink->link->connector_signal,
stream->signal,
&stream->timing);
break;
case SIGNAL_TYPE_HDMI_TYPE_A:
is_valid = dcn10_link_encoder_validate_hdmi_output(
enc10,
&stream->timing,
stream->phy_pix_clk);
break;
case SIGNAL_TYPE_DISPLAY_PORT:
case SIGNAL_TYPE_DISPLAY_PORT_MST:
is_valid = dcn10_link_encoder_validate_dp_output(
enc10, &stream->timing);
break;
case SIGNAL_TYPE_EDP:
is_valid = (stream->timing.pixel_encoding == PIXEL_ENCODING_RGB) ? true : false;
break;
case SIGNAL_TYPE_VIRTUAL:
is_valid = true;
break;
default:
is_valid = false;
break;
}
return is_valid;
}
void dcn10_link_encoder_hw_init(
struct link_encoder *enc)
{
struct dcn10_link_encoder *enc10 = TO_DCN10_LINK_ENC(enc);
struct bp_transmitter_control cntl = { 0 };
enum bp_result result;
cntl.action = TRANSMITTER_CONTROL_INIT;
cntl.engine_id = ENGINE_ID_UNKNOWN;
cntl.transmitter = enc10->base.transmitter;
cntl.connector_obj_id = enc10->base.connector;
cntl.lanes_number = LANE_COUNT_FOUR;
cntl.coherent = false;
cntl.hpd_sel = enc10->base.hpd_source;
if (enc10->base.connector.id == CONNECTOR_ID_EDP)
cntl.signal = SIGNAL_TYPE_EDP;
result = link_transmitter_control(enc10, &cntl);
if (result != BP_RESULT_OK) {
DC_LOG_ERROR("%s: Failed to execute VBIOS command table!\n",
__func__);
BREAK_TO_DEBUGGER();
return;
}
if (enc10->base.connector.id == CONNECTOR_ID_LVDS) {
cntl.action = TRANSMITTER_CONTROL_BACKLIGHT_BRIGHTNESS;
result = link_transmitter_control(enc10, &cntl);
ASSERT(result == BP_RESULT_OK);
}
aux_initialize(enc10);
/* reinitialize HPD.
* hpd_initialize() will pass DIG_FE id to HW context.
* All other routine within HW context will use fe_engine_offset
* as DIG_FE id even caller pass DIG_FE id.
* So this routine must be called first.
*/
hpd_initialize(enc10);
}
void dcn10_link_encoder_destroy(struct link_encoder **enc)
{
kfree(TO_DCN10_LINK_ENC(*enc));
*enc = NULL;
}
void dcn10_link_encoder_setup(
struct link_encoder *enc,
enum signal_type signal)
{
struct dcn10_link_encoder *enc10 = TO_DCN10_LINK_ENC(enc);
switch (signal) {
case SIGNAL_TYPE_EDP:
case SIGNAL_TYPE_DISPLAY_PORT:
/* DP SST */
REG_UPDATE(DIG_BE_CNTL, DIG_MODE, 0);
break;
case SIGNAL_TYPE_LVDS:
/* LVDS */
REG_UPDATE(DIG_BE_CNTL, DIG_MODE, 1);
break;
case SIGNAL_TYPE_DVI_SINGLE_LINK:
case SIGNAL_TYPE_DVI_DUAL_LINK:
/* TMDS-DVI */
REG_UPDATE(DIG_BE_CNTL, DIG_MODE, 2);
break;
case SIGNAL_TYPE_HDMI_TYPE_A:
/* TMDS-HDMI */
REG_UPDATE(DIG_BE_CNTL, DIG_MODE, 3);
break;
case SIGNAL_TYPE_DISPLAY_PORT_MST:
/* DP MST */
REG_UPDATE(DIG_BE_CNTL, DIG_MODE, 5);
break;
default:
ASSERT_CRITICAL(false);
/* invalid mode ! */
break;
}
}
/* TODO: still need depth or just pass in adjusted pixel clock? */
void dcn10_link_encoder_enable_tmds_output(
struct link_encoder *enc,
enum clock_source_id clock_source,
enum dc_color_depth color_depth,
enum signal_type signal,
uint32_t pixel_clock)
{
struct dcn10_link_encoder *enc10 = TO_DCN10_LINK_ENC(enc);
struct bp_transmitter_control cntl = { 0 };
enum bp_result result;
/* Enable the PHY */
cntl.action = TRANSMITTER_CONTROL_ENABLE;
cntl.engine_id = enc->preferred_engine;
cntl.transmitter = enc10->base.transmitter;
cntl.pll_id = clock_source;
cntl.signal = signal;
if (cntl.signal == SIGNAL_TYPE_DVI_DUAL_LINK)
cntl.lanes_number = 8;
else
cntl.lanes_number = 4;
cntl.hpd_sel = enc10->base.hpd_source;
cntl.pixel_clock = pixel_clock;
cntl.color_depth = color_depth;
result = link_transmitter_control(enc10, &cntl);
if (result != BP_RESULT_OK) {
DC_LOG_ERROR("%s: Failed to execute VBIOS command table!\n",
__func__);
BREAK_TO_DEBUGGER();
}
}
/* enables DP PHY output */
void dcn10_link_encoder_enable_dp_output(
struct link_encoder *enc,
const struct dc_link_settings *link_settings,
enum clock_source_id clock_source)
{
struct dcn10_link_encoder *enc10 = TO_DCN10_LINK_ENC(enc);
struct bp_transmitter_control cntl = { 0 };
enum bp_result result;
/* Enable the PHY */
/* number_of_lanes is used for pixel clock adjust,
* but it's not passed to asic_control.
* We need to set number of lanes manually.
*/
configure_encoder(enc10, link_settings);
cntl.action = TRANSMITTER_CONTROL_ENABLE;
cntl.engine_id = enc->preferred_engine;
cntl.transmitter = enc10->base.transmitter;
cntl.pll_id = clock_source;
cntl.signal = SIGNAL_TYPE_DISPLAY_PORT;
cntl.lanes_number = link_settings->lane_count;
cntl.hpd_sel = enc10->base.hpd_source;
cntl.pixel_clock = link_settings->link_rate
* LINK_RATE_REF_FREQ_IN_KHZ;
/* TODO: check if undefined works */
cntl.color_depth = COLOR_DEPTH_UNDEFINED;
result = link_transmitter_control(enc10, &cntl);
if (result != BP_RESULT_OK) {
DC_LOG_ERROR("%s: Failed to execute VBIOS command table!\n",
__func__);
BREAK_TO_DEBUGGER();
}
}
/* enables DP PHY output in MST mode */
void dcn10_link_encoder_enable_dp_mst_output(
struct link_encoder *enc,
const struct dc_link_settings *link_settings,
enum clock_source_id clock_source)
{
struct dcn10_link_encoder *enc10 = TO_DCN10_LINK_ENC(enc);
struct bp_transmitter_control cntl = { 0 };
enum bp_result result;
/* Enable the PHY */
/* number_of_lanes is used for pixel clock adjust,
* but it's not passed to asic_control.
* We need to set number of lanes manually.
*/
configure_encoder(enc10, link_settings);
cntl.action = TRANSMITTER_CONTROL_ENABLE;
cntl.engine_id = ENGINE_ID_UNKNOWN;
cntl.transmitter = enc10->base.transmitter;
cntl.pll_id = clock_source;
cntl.signal = SIGNAL_TYPE_DISPLAY_PORT_MST;
cntl.lanes_number = link_settings->lane_count;
cntl.hpd_sel = enc10->base.hpd_source;
cntl.pixel_clock = link_settings->link_rate
* LINK_RATE_REF_FREQ_IN_KHZ;
/* TODO: check if undefined works */
cntl.color_depth = COLOR_DEPTH_UNDEFINED;
result = link_transmitter_control(enc10, &cntl);
if (result != BP_RESULT_OK) {
DC_LOG_ERROR("%s: Failed to execute VBIOS command table!\n",
__func__);
BREAK_TO_DEBUGGER();
}
}
/*
* @brief
* Disable transmitter and its encoder
*/
void dcn10_link_encoder_disable_output(
struct link_encoder *enc,
enum signal_type signal)
{
struct dcn10_link_encoder *enc10 = TO_DCN10_LINK_ENC(enc);
struct bp_transmitter_control cntl = { 0 };
enum bp_result result;
if (!dcn10_is_dig_enabled(enc)) {
/* OF_SKIP_POWER_DOWN_INACTIVE_ENCODER */
return;
}
/* Power-down RX and disable GPU PHY should be paired.
* Disabling PHY without powering down RX may cause
* symbol lock loss, on which we will get DP Sink interrupt.
*/
/* There is a case for the DP active dongles
* where we want to disable the PHY but keep RX powered,
* for those we need to ignore DP Sink interrupt
* by checking lane count that has been set
* on the last do_enable_output().
*/
/* disable transmitter */
cntl.action = TRANSMITTER_CONTROL_DISABLE;
cntl.transmitter = enc10->base.transmitter;
cntl.hpd_sel = enc10->base.hpd_source;
cntl.signal = signal;
cntl.connector_obj_id = enc10->base.connector;
result = link_transmitter_control(enc10, &cntl);
if (result != BP_RESULT_OK) {
DC_LOG_ERROR("%s: Failed to execute VBIOS command table!\n",
__func__);
BREAK_TO_DEBUGGER();
return;
}
/* disable encoder */
if (dc_is_dp_signal(signal))
link_encoder_disable(enc10);
}
void dcn10_link_encoder_dp_set_lane_settings(
struct link_encoder *enc,
const struct link_training_settings *link_settings)
{
struct dcn10_link_encoder *enc10 = TO_DCN10_LINK_ENC(enc);
union dpcd_training_lane_set training_lane_set = { { 0 } };
int32_t lane = 0;
struct bp_transmitter_control cntl = { 0 };
if (!link_settings) {
BREAK_TO_DEBUGGER();
return;
}
cntl.action = TRANSMITTER_CONTROL_SET_VOLTAGE_AND_PREEMPASIS;
cntl.transmitter = enc10->base.transmitter;
cntl.connector_obj_id = enc10->base.connector;
cntl.lanes_number = link_settings->link_settings.lane_count;
cntl.hpd_sel = enc10->base.hpd_source;
cntl.pixel_clock = link_settings->link_settings.link_rate *
LINK_RATE_REF_FREQ_IN_KHZ;
for (lane = 0; lane < link_settings->link_settings.lane_count; lane++) {
/* translate lane settings */
training_lane_set.bits.VOLTAGE_SWING_SET =
link_settings->lane_settings[lane].VOLTAGE_SWING;
training_lane_set.bits.PRE_EMPHASIS_SET =
link_settings->lane_settings[lane].PRE_EMPHASIS;
/* post cursor 2 setting only applies to HBR2 link rate */
if (link_settings->link_settings.link_rate == LINK_RATE_HIGH2) {
/* this is passed to VBIOS
* to program post cursor 2 level
*/
training_lane_set.bits.POST_CURSOR2_SET =
link_settings->lane_settings[lane].POST_CURSOR2;
}
cntl.lane_select = lane;
cntl.lane_settings = training_lane_set.raw;
/* call VBIOS table to set voltage swing and pre-emphasis */
link_transmitter_control(enc10, &cntl);
}
}
/* set DP PHY test and training patterns */
void dcn10_link_encoder_dp_set_phy_pattern(
struct link_encoder *enc,
const struct encoder_set_dp_phy_pattern_param *param)
{
struct dcn10_link_encoder *enc10 = TO_DCN10_LINK_ENC(enc);
switch (param->dp_phy_pattern) {
case DP_TEST_PATTERN_TRAINING_PATTERN1:
dcn10_link_encoder_set_dp_phy_pattern_training_pattern(enc, 0);
break;
case DP_TEST_PATTERN_TRAINING_PATTERN2:
dcn10_link_encoder_set_dp_phy_pattern_training_pattern(enc, 1);
break;
case DP_TEST_PATTERN_TRAINING_PATTERN3:
dcn10_link_encoder_set_dp_phy_pattern_training_pattern(enc, 2);
break;
case DP_TEST_PATTERN_TRAINING_PATTERN4:
dcn10_link_encoder_set_dp_phy_pattern_training_pattern(enc, 3);
break;
case DP_TEST_PATTERN_D102:
set_dp_phy_pattern_d102(enc10);
break;
case DP_TEST_PATTERN_SYMBOL_ERROR:
set_dp_phy_pattern_symbol_error(enc10);
break;
case DP_TEST_PATTERN_PRBS7:
set_dp_phy_pattern_prbs7(enc10);
break;
case DP_TEST_PATTERN_80BIT_CUSTOM:
set_dp_phy_pattern_80bit_custom(
enc10, param->custom_pattern);
break;
case DP_TEST_PATTERN_CP2520_1:
set_dp_phy_pattern_hbr2_compliance_cp2520_2(enc10, 1);
break;
case DP_TEST_PATTERN_CP2520_2:
set_dp_phy_pattern_hbr2_compliance_cp2520_2(enc10, 2);
break;
case DP_TEST_PATTERN_CP2520_3:
set_dp_phy_pattern_hbr2_compliance_cp2520_2(enc10, 3);
break;
case DP_TEST_PATTERN_VIDEO_MODE: {
set_dp_phy_pattern_passthrough_mode(
enc10, param->dp_panel_mode);
break;
}
default:
/* invalid phy pattern */
ASSERT_CRITICAL(false);
break;
}
}
static void fill_stream_allocation_row_info(
const struct link_mst_stream_allocation *stream_allocation,
uint32_t *src,
uint32_t *slots)
{
const struct stream_encoder *stream_enc = stream_allocation->stream_enc;
if (stream_enc) {
*src = stream_enc->id;
*slots = stream_allocation->slot_count;
} else {
*src = 0;
*slots = 0;
}
}
/* programs DP MST VC payload allocation */
void dcn10_link_encoder_update_mst_stream_allocation_table(
struct link_encoder *enc,
const struct link_mst_stream_allocation_table *table)
{
struct dcn10_link_encoder *enc10 = TO_DCN10_LINK_ENC(enc);
uint32_t value0 = 0;
uint32_t value1 = 0;
uint32_t value2 = 0;
uint32_t slots = 0;
uint32_t src = 0;
uint32_t retries = 0;
/* For CZ, there are only 3 pipes. So Virtual channel is up 3.*/
/* --- Set MSE Stream Attribute -
* Setup VC Payload Table on Tx Side,
* Issue allocation change trigger
* to commit payload on both tx and rx side
*/
/* we should clean-up table each time */
if (table->stream_count >= 1) {
fill_stream_allocation_row_info(
&table->stream_allocations[0],
&src,
&slots);
} else {
src = 0;
slots = 0;
}
REG_UPDATE_2(DP_MSE_SAT0,
DP_MSE_SAT_SRC0, src,
DP_MSE_SAT_SLOT_COUNT0, slots);
if (table->stream_count >= 2) {
fill_stream_allocation_row_info(
&table->stream_allocations[1],
&src,
&slots);
} else {
src = 0;
slots = 0;
}
REG_UPDATE_2(DP_MSE_SAT0,
DP_MSE_SAT_SRC1, src,
DP_MSE_SAT_SLOT_COUNT1, slots);
if (table->stream_count >= 3) {
fill_stream_allocation_row_info(
&table->stream_allocations[2],
&src,
&slots);
} else {
src = 0;
slots = 0;
}
REG_UPDATE_2(DP_MSE_SAT1,
DP_MSE_SAT_SRC2, src,
DP_MSE_SAT_SLOT_COUNT2, slots);
if (table->stream_count >= 4) {
fill_stream_allocation_row_info(
&table->stream_allocations[3],
&src,
&slots);
} else {
src = 0;
slots = 0;
}
REG_UPDATE_2(DP_MSE_SAT1,
DP_MSE_SAT_SRC3, src,
DP_MSE_SAT_SLOT_COUNT3, slots);
/* --- wait for transaction finish */
/* send allocation change trigger (ACT) ?
* this step first sends the ACT,
* then double buffers the SAT into the hardware
* making the new allocation active on the DP MST mode link
*/
/* DP_MSE_SAT_UPDATE:
* 0 - No Action
* 1 - Update SAT with trigger
* 2 - Update SAT without trigger
*/
REG_UPDATE(DP_MSE_SAT_UPDATE,
DP_MSE_SAT_UPDATE, 1);
/* wait for update to complete
* (i.e. DP_MSE_SAT_UPDATE field is reset to 0)
* then wait for the transmission
* of at least 16 MTP headers on immediate local link.
* i.e. DP_MSE_16_MTP_KEEPOUT field (read only) is reset to 0
* a value of 1 indicates that DP MST mode
* is in the 16 MTP keepout region after a VC has been added.
* MST stream bandwidth (VC rate) can be configured
* after this bit is cleared
*/
do {
udelay(10);
value0 = REG_READ(DP_MSE_SAT_UPDATE);
REG_GET(DP_MSE_SAT_UPDATE,
DP_MSE_SAT_UPDATE, &value1);
REG_GET(DP_MSE_SAT_UPDATE,
DP_MSE_16_MTP_KEEPOUT, &value2);
/* bit field DP_MSE_SAT_UPDATE is set to 1 already */
if (!value1 && !value2)
break;
++retries;
} while (retries < DP_MST_UPDATE_MAX_RETRY);
}
void dcn10_link_encoder_connect_dig_be_to_fe(
struct link_encoder *enc,
enum engine_id engine,
bool connect)
{
struct dcn10_link_encoder *enc10 = TO_DCN10_LINK_ENC(enc);
uint32_t field;
if (engine != ENGINE_ID_UNKNOWN) {
REG_GET(DIG_BE_CNTL, DIG_FE_SOURCE_SELECT, &field);
if (connect)
field |= get_frontend_source(engine);
else
field &= ~get_frontend_source(engine);
REG_UPDATE(DIG_BE_CNTL, DIG_FE_SOURCE_SELECT, field);
}
}
#define HPD_REG(reg)\
(enc10->hpd_regs->reg)
#define HPD_REG_READ(reg_name) \
dm_read_reg(CTX, HPD_REG(reg_name))
#define HPD_REG_UPDATE_N(reg_name, n, ...) \
generic_reg_update_ex(CTX, \
HPD_REG(reg_name), \
HPD_REG_READ(reg_name), \
n, __VA_ARGS__)
#define HPD_REG_UPDATE(reg_name, field, val) \
HPD_REG_UPDATE_N(reg_name, 1, \
FN(reg_name, field), val)
void dcn10_link_encoder_enable_hpd(struct link_encoder *enc)
{
struct dcn10_link_encoder *enc10 = TO_DCN10_LINK_ENC(enc);
HPD_REG_UPDATE(DC_HPD_CONTROL,
DC_HPD_EN, 1);
}
void dcn10_link_encoder_disable_hpd(struct link_encoder *enc)
{
struct dcn10_link_encoder *enc10 = TO_DCN10_LINK_ENC(enc);
HPD_REG_UPDATE(DC_HPD_CONTROL,
DC_HPD_EN, 0);
}
#define AUX_REG(reg)\
(enc10->aux_regs->reg)
#define AUX_REG_READ(reg_name) \
dm_read_reg(CTX, AUX_REG(reg_name))
#define AUX_REG_UPDATE_N(reg_name, n, ...) \
generic_reg_update_ex(CTX, \
AUX_REG(reg_name), \
AUX_REG_READ(reg_name), \
n, __VA_ARGS__)
#define AUX_REG_UPDATE(reg_name, field, val) \
AUX_REG_UPDATE_N(reg_name, 1, \
FN(reg_name, field), val)
#define AUX_REG_UPDATE_2(reg, f1, v1, f2, v2) \
AUX_REG_UPDATE_N(reg, 2,\
FN(reg, f1), v1,\
FN(reg, f2), v2)
static void aux_initialize(
struct dcn10_link_encoder *enc10)
{
enum hpd_source_id hpd_source = enc10->base.hpd_source;
AUX_REG_UPDATE_2(AUX_CONTROL,
AUX_HPD_SEL, hpd_source,
AUX_LS_READ_EN, 0);
/* 1/4 window (the maximum allowed) */
AUX_REG_UPDATE(AUX_DPHY_RX_CONTROL0,
AUX_RX_RECEIVE_WINDOW, 1);
}
/*
* Copyright 2012-15 Advanced Micro Devices, Inc.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*
* Authors: AMD
*
*/
#ifndef __DC_LINK_ENCODER__DCN10_H__
#define __DC_LINK_ENCODER__DCN10_H__
#include "link_encoder.h"
#define TO_DCN10_LINK_ENC(link_encoder)\
container_of(link_encoder, struct dcn10_link_encoder, base)
#define AUX_REG_LIST(id)\
SRI(AUX_CONTROL, DP_AUX, id), \
SRI(AUX_DPHY_RX_CONTROL0, DP_AUX, id)
#define HPD_REG_LIST(id)\
SRI(DC_HPD_CONTROL, HPD, id)
#define LE_DCN_COMMON_REG_LIST(id) \
SRI(DIG_BE_CNTL, DIG, id), \
SRI(DIG_BE_EN_CNTL, DIG, id), \
SRI(DP_CONFIG, DP, id), \
SRI(DP_DPHY_CNTL, DP, id), \
SRI(DP_DPHY_PRBS_CNTL, DP, id), \
SRI(DP_DPHY_SCRAM_CNTL, DP, id),\
SRI(DP_DPHY_SYM0, DP, id), \
SRI(DP_DPHY_SYM1, DP, id), \
SRI(DP_DPHY_SYM2, DP, id), \
SRI(DP_DPHY_TRAINING_PATTERN_SEL, DP, id), \
SRI(DP_LINK_CNTL, DP, id), \
SRI(DP_LINK_FRAMING_CNTL, DP, id), \
SRI(DP_MSE_SAT0, DP, id), \
SRI(DP_MSE_SAT1, DP, id), \
SRI(DP_MSE_SAT2, DP, id), \
SRI(DP_MSE_SAT_UPDATE, DP, id), \
SRI(DP_SEC_CNTL, DP, id), \
SRI(DP_VID_STREAM_CNTL, DP, id), \
SRI(DP_DPHY_FAST_TRAINING, DP, id), \
SRI(DP_SEC_CNTL1, DP, id), \
SRI(DP_DPHY_BS_SR_SWAP_CNTL, DP, id), \
SRI(DP_DPHY_INTERNAL_CTRL, DP, id), \
SRI(DP_DPHY_HBR2_PATTERN_CONTROL, DP, id)
#define LE_DCN10_REG_LIST(id)\
LE_DCN_COMMON_REG_LIST(id)
struct dcn10_link_enc_aux_registers {
uint32_t AUX_CONTROL;
uint32_t AUX_DPHY_RX_CONTROL0;
};
struct dcn10_link_enc_hpd_registers {
uint32_t DC_HPD_CONTROL;
};
struct dcn10_link_enc_registers {
uint32_t DIG_BE_CNTL;
uint32_t DIG_BE_EN_CNTL;
uint32_t DP_CONFIG;
uint32_t DP_DPHY_CNTL;
uint32_t DP_DPHY_INTERNAL_CTRL;
uint32_t DP_DPHY_PRBS_CNTL;
uint32_t DP_DPHY_SCRAM_CNTL;
uint32_t DP_DPHY_SYM0;
uint32_t DP_DPHY_SYM1;
uint32_t DP_DPHY_SYM2;
uint32_t DP_DPHY_TRAINING_PATTERN_SEL;
uint32_t DP_LINK_CNTL;
uint32_t DP_LINK_FRAMING_CNTL;
uint32_t DP_MSE_SAT0;
uint32_t DP_MSE_SAT1;
uint32_t DP_MSE_SAT2;
uint32_t DP_MSE_SAT_UPDATE;
uint32_t DP_SEC_CNTL;
uint32_t DP_VID_STREAM_CNTL;
uint32_t DP_DPHY_FAST_TRAINING;
uint32_t DP_DPHY_BS_SR_SWAP_CNTL;
uint32_t DP_DPHY_HBR2_PATTERN_CONTROL;
uint32_t DP_SEC_CNTL1;
};
#define LE_SF(reg_name, field_name, post_fix)\
.field_name = reg_name ## __ ## field_name ## post_fix
#define LINK_ENCODER_MASK_SH_LIST_DCN10(mask_sh)\
LE_SF(DIG0_DIG_BE_EN_CNTL, DIG_ENABLE, mask_sh),\
LE_SF(DIG0_DIG_BE_CNTL, DIG_HPD_SELECT, mask_sh),\
LE_SF(DIG0_DIG_BE_CNTL, DIG_MODE, mask_sh),\
LE_SF(DIG0_DIG_BE_CNTL, DIG_FE_SOURCE_SELECT, mask_sh),\
LE_SF(DP0_DP_DPHY_CNTL, DPHY_BYPASS, mask_sh),\
LE_SF(DP0_DP_DPHY_CNTL, DPHY_ATEST_SEL_LANE0, mask_sh),\
LE_SF(DP0_DP_DPHY_CNTL, DPHY_ATEST_SEL_LANE1, mask_sh),\
LE_SF(DP0_DP_DPHY_CNTL, DPHY_ATEST_SEL_LANE2, mask_sh),\
LE_SF(DP0_DP_DPHY_CNTL, DPHY_ATEST_SEL_LANE3, mask_sh),\
LE_SF(DP0_DP_DPHY_PRBS_CNTL, DPHY_PRBS_EN, mask_sh),\
LE_SF(DP0_DP_DPHY_PRBS_CNTL, DPHY_PRBS_SEL, mask_sh),\
LE_SF(DP0_DP_DPHY_SYM0, DPHY_SYM1, mask_sh),\
LE_SF(DP0_DP_DPHY_SYM0, DPHY_SYM2, mask_sh),\
LE_SF(DP0_DP_DPHY_SYM0, DPHY_SYM3, mask_sh),\
LE_SF(DP0_DP_DPHY_SYM1, DPHY_SYM4, mask_sh),\
LE_SF(DP0_DP_DPHY_SYM1, DPHY_SYM5, mask_sh),\
LE_SF(DP0_DP_DPHY_SYM1, DPHY_SYM6, mask_sh),\
LE_SF(DP0_DP_DPHY_SYM2, DPHY_SYM7, mask_sh),\
LE_SF(DP0_DP_DPHY_SYM2, DPHY_SYM8, mask_sh),\
LE_SF(DP0_DP_DPHY_SCRAM_CNTL, DPHY_SCRAMBLER_BS_COUNT, mask_sh),\
LE_SF(DP0_DP_DPHY_SCRAM_CNTL, DPHY_SCRAMBLER_ADVANCE, mask_sh),\
LE_SF(DP0_DP_DPHY_FAST_TRAINING, DPHY_RX_FAST_TRAINING_CAPABLE, mask_sh),\
LE_SF(DP0_DP_DPHY_BS_SR_SWAP_CNTL, DPHY_LOAD_BS_COUNT, mask_sh),\
LE_SF(DP0_DP_DPHY_TRAINING_PATTERN_SEL, DPHY_TRAINING_PATTERN_SEL, mask_sh),\
LE_SF(DP0_DP_DPHY_HBR2_PATTERN_CONTROL, DP_DPHY_HBR2_PATTERN_CONTROL, mask_sh),\
LE_SF(DP0_DP_LINK_CNTL, DP_LINK_TRAINING_COMPLETE, mask_sh),\
LE_SF(DP0_DP_LINK_FRAMING_CNTL, DP_IDLE_BS_INTERVAL, mask_sh),\
LE_SF(DP0_DP_LINK_FRAMING_CNTL, DP_VBID_DISABLE, mask_sh),\
LE_SF(DP0_DP_LINK_FRAMING_CNTL, DP_VID_ENHANCED_FRAME_MODE, mask_sh),\
LE_SF(DP0_DP_VID_STREAM_CNTL, DP_VID_STREAM_ENABLE, mask_sh),\
LE_SF(DP0_DP_CONFIG, DP_UDI_LANES, mask_sh),\
LE_SF(DP0_DP_SEC_CNTL1, DP_SEC_GSP0_LINE_NUM, mask_sh),\
LE_SF(DP0_DP_SEC_CNTL1, DP_SEC_GSP0_PRIORITY, mask_sh),\
LE_SF(DP0_DP_MSE_SAT0, DP_MSE_SAT_SRC0, mask_sh),\
LE_SF(DP0_DP_MSE_SAT0, DP_MSE_SAT_SRC1, mask_sh),\
LE_SF(DP0_DP_MSE_SAT0, DP_MSE_SAT_SLOT_COUNT0, mask_sh),\
LE_SF(DP0_DP_MSE_SAT0, DP_MSE_SAT_SLOT_COUNT1, mask_sh),\
LE_SF(DP0_DP_MSE_SAT1, DP_MSE_SAT_SRC2, mask_sh),\
LE_SF(DP0_DP_MSE_SAT1, DP_MSE_SAT_SRC3, mask_sh),\
LE_SF(DP0_DP_MSE_SAT1, DP_MSE_SAT_SLOT_COUNT2, mask_sh),\
LE_SF(DP0_DP_MSE_SAT1, DP_MSE_SAT_SLOT_COUNT3, mask_sh),\
LE_SF(DP0_DP_MSE_SAT_UPDATE, DP_MSE_SAT_UPDATE, mask_sh),\
LE_SF(DP0_DP_MSE_SAT_UPDATE, DP_MSE_16_MTP_KEEPOUT, mask_sh),\
LE_SF(DP_AUX0_AUX_CONTROL, AUX_HPD_SEL, mask_sh),\
LE_SF(DP_AUX0_AUX_CONTROL, AUX_LS_READ_EN, mask_sh),\
LE_SF(DP_AUX0_AUX_DPHY_RX_CONTROL0, AUX_RX_RECEIVE_WINDOW, mask_sh),\
LE_SF(HPD0_DC_HPD_CONTROL, DC_HPD_EN, mask_sh)
#define DCN_LINK_ENCODER_REG_FIELD_LIST(type) \
type DIG_ENABLE;\
type DIG_HPD_SELECT;\
type DIG_MODE;\
type DIG_FE_SOURCE_SELECT;\
type DPHY_BYPASS;\
type DPHY_ATEST_SEL_LANE0;\
type DPHY_ATEST_SEL_LANE1;\
type DPHY_ATEST_SEL_LANE2;\
type DPHY_ATEST_SEL_LANE3;\
type DPHY_PRBS_EN;\
type DPHY_PRBS_SEL;\
type DPHY_SYM1;\
type DPHY_SYM2;\
type DPHY_SYM3;\
type DPHY_SYM4;\
type DPHY_SYM5;\
type DPHY_SYM6;\
type DPHY_SYM7;\
type DPHY_SYM8;\
type DPHY_SCRAMBLER_BS_COUNT;\
type DPHY_SCRAMBLER_ADVANCE;\
type DPHY_RX_FAST_TRAINING_CAPABLE;\
type DPHY_LOAD_BS_COUNT;\
type DPHY_TRAINING_PATTERN_SEL;\
type DP_DPHY_HBR2_PATTERN_CONTROL;\
type DP_LINK_TRAINING_COMPLETE;\
type DP_IDLE_BS_INTERVAL;\
type DP_VBID_DISABLE;\
type DP_VID_ENHANCED_FRAME_MODE;\
type DP_VID_STREAM_ENABLE;\
type DP_UDI_LANES;\
type DP_SEC_GSP0_LINE_NUM;\
type DP_SEC_GSP0_PRIORITY;\
type DP_MSE_SAT_SRC0;\
type DP_MSE_SAT_SRC1;\
type DP_MSE_SAT_SRC2;\
type DP_MSE_SAT_SRC3;\
type DP_MSE_SAT_SLOT_COUNT0;\
type DP_MSE_SAT_SLOT_COUNT1;\
type DP_MSE_SAT_SLOT_COUNT2;\
type DP_MSE_SAT_SLOT_COUNT3;\
type DP_MSE_SAT_UPDATE;\
type DP_MSE_16_MTP_KEEPOUT;\
type AUX_HPD_SEL;\
type AUX_LS_READ_EN;\
type AUX_RX_RECEIVE_WINDOW;\
type DC_HPD_EN
struct dcn10_link_enc_shift {
DCN_LINK_ENCODER_REG_FIELD_LIST(uint8_t);
};
struct dcn10_link_enc_mask {
DCN_LINK_ENCODER_REG_FIELD_LIST(uint32_t);
};
struct dcn10_link_encoder {
struct link_encoder base;
const struct dcn10_link_enc_registers *link_regs;
const struct dcn10_link_enc_aux_registers *aux_regs;
const struct dcn10_link_enc_hpd_registers *hpd_regs;
const struct dcn10_link_enc_shift *link_shift;
const struct dcn10_link_enc_mask *link_mask;
};
void dcn10_link_encoder_construct(
struct dcn10_link_encoder *enc10,
const struct encoder_init_data *init_data,
const struct encoder_feature_support *enc_features,
const struct dcn10_link_enc_registers *link_regs,
const struct dcn10_link_enc_aux_registers *aux_regs,
const struct dcn10_link_enc_hpd_registers *hpd_regs,
const struct dcn10_link_enc_shift *link_shift,
const struct dcn10_link_enc_mask *link_mask);
bool dcn10_link_encoder_validate_dvi_output(
const struct dcn10_link_encoder *enc10,
enum signal_type connector_signal,
enum signal_type signal,
const struct dc_crtc_timing *crtc_timing);
bool dcn10_link_encoder_validate_rgb_output(
const struct dcn10_link_encoder *enc10,
const struct dc_crtc_timing *crtc_timing);
bool dcn10_link_encoder_validate_dp_output(
const struct dcn10_link_encoder *enc10,
const struct dc_crtc_timing *crtc_timing);
bool dcn10_link_encoder_validate_wireless_output(
const struct dcn10_link_encoder *enc10,
const struct dc_crtc_timing *crtc_timing);
bool dcn10_link_encoder_validate_output_with_stream(
struct link_encoder *enc,
const struct dc_stream_state *stream);
/****************** HW programming ************************/
/* initialize HW */ /* why do we initialze aux in here? */
void dcn10_link_encoder_hw_init(struct link_encoder *enc);
void dcn10_link_encoder_destroy(struct link_encoder **enc);
/* program DIG_MODE in DIG_BE */
/* TODO can this be combined with enable_output? */
void dcn10_link_encoder_setup(
struct link_encoder *enc,
enum signal_type signal);
/* enables TMDS PHY output */
/* TODO: still need depth or just pass in adjusted pixel clock? */
void dcn10_link_encoder_enable_tmds_output(
struct link_encoder *enc,
enum clock_source_id clock_source,
enum dc_color_depth color_depth,
enum signal_type signal,
uint32_t pixel_clock);
/* enables DP PHY output */
void dcn10_link_encoder_enable_dp_output(
struct link_encoder *enc,
const struct dc_link_settings *link_settings,
enum clock_source_id clock_source);
/* enables DP PHY output in MST mode */
void dcn10_link_encoder_enable_dp_mst_output(
struct link_encoder *enc,
const struct dc_link_settings *link_settings,
enum clock_source_id clock_source);
/* disable PHY output */
void dcn10_link_encoder_disable_output(
struct link_encoder *enc,
enum signal_type signal);
/* set DP lane settings */
void dcn10_link_encoder_dp_set_lane_settings(
struct link_encoder *enc,
const struct link_training_settings *link_settings);
void dcn10_link_encoder_dp_set_phy_pattern(
struct link_encoder *enc,
const struct encoder_set_dp_phy_pattern_param *param);
/* programs DP MST VC payload allocation */
void dcn10_link_encoder_update_mst_stream_allocation_table(
struct link_encoder *enc,
const struct link_mst_stream_allocation_table *table);
void dcn10_link_encoder_connect_dig_be_to_fe(
struct link_encoder *enc,
enum engine_id engine,
bool connect);
void dcn10_link_encoder_set_dp_phy_pattern_training_pattern(
struct link_encoder *enc,
uint32_t index);
void dcn10_link_encoder_enable_hpd(struct link_encoder *enc);
void dcn10_link_encoder_disable_hpd(struct link_encoder *enc);
void dcn10_psr_program_dp_dphy_fast_training(struct link_encoder *enc,
bool exit_link_training_required);
void dcn10_psr_program_secondary_packet(struct link_encoder *enc,
unsigned int sdp_transmit_line_num_deadline);
bool dcn10_is_dig_enabled(struct link_encoder *enc);
#endif /* __DC_LINK_ENCODER__DCN10_H__ */
......@@ -38,7 +38,7 @@
#include "dcn10/dcn10_hw_sequencer.h"
#include "dce110/dce110_hw_sequencer.h"
#include "dcn10/dcn10_opp.h"
#include "dce/dce_link_encoder.h"
#include "dcn10/dcn10_link_encoder.h"
#include "dcn10/dcn10_stream_encoder.h"
#include "dce/dce_clocks.h"
#include "dce/dce_clock_source.h"
......@@ -214,13 +214,11 @@ static const struct dce_aduio_mask audio_mask = {
AUX_REG_LIST(id)\
}
static const struct dce110_link_enc_aux_registers link_enc_aux_regs[] = {
static const struct dcn10_link_enc_aux_registers link_enc_aux_regs[] = {
aux_regs(0),
aux_regs(1),
aux_regs(2),
aux_regs(3),
aux_regs(4),
aux_regs(5)
aux_regs(3)
};
#define hpd_regs(id)\
......@@ -228,13 +226,11 @@ static const struct dce110_link_enc_aux_registers link_enc_aux_regs[] = {
HPD_REG_LIST(id)\
}
static const struct dce110_link_enc_hpd_registers link_enc_hpd_regs[] = {
static const struct dcn10_link_enc_hpd_registers link_enc_hpd_regs[] = {
hpd_regs(0),
hpd_regs(1),
hpd_regs(2),
hpd_regs(3),
hpd_regs(4),
hpd_regs(5)
hpd_regs(3)
};
#define link_regs(id)\
......@@ -243,14 +239,19 @@ static const struct dce110_link_enc_hpd_registers link_enc_hpd_regs[] = {
SRI(DP_DPHY_INTERNAL_CTRL, DP, id) \
}
static const struct dce110_link_enc_registers link_enc_regs[] = {
static const struct dcn10_link_enc_registers link_enc_regs[] = {
link_regs(0),
link_regs(1),
link_regs(2),
link_regs(3),
link_regs(4),
link_regs(5),
link_regs(6),
link_regs(3)
};
static const struct dcn10_link_enc_shift le_shift = {
LINK_ENCODER_MASK_SH_LIST_DCN10(__SHIFT)
};
static const struct dcn10_link_enc_mask le_mask = {
LINK_ENCODER_MASK_SH_LIST_DCN10(_MASK)
};
#define ipp_regs(id)\
......@@ -583,20 +584,22 @@ static const struct encoder_feature_support link_enc_feature = {
struct link_encoder *dcn10_link_encoder_create(
const struct encoder_init_data *enc_init_data)
{
struct dce110_link_encoder *enc110 =
kzalloc(sizeof(struct dce110_link_encoder), GFP_KERNEL);
struct dcn10_link_encoder *enc10 =
kzalloc(sizeof(struct dcn10_link_encoder), GFP_KERNEL);
if (!enc110)
if (!enc10)
return NULL;
dce110_link_encoder_construct(enc110,
dcn10_link_encoder_construct(enc10,
enc_init_data,
&link_enc_feature,
&link_enc_regs[enc_init_data->transmitter],
&link_enc_aux_regs[enc_init_data->channel - 1],
&link_enc_hpd_regs[enc_init_data->hpd_source]);
&link_enc_hpd_regs[enc_init_data->hpd_source],
&le_shift,
&le_mask);
return &enc110->base;
return &enc10->base;
}
struct clock_source *dcn10_clock_source_create(
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment