Input: Add support for Azoteq IQS626A

This patch adds support for the Azoteq IQS626A capacitive touch
controller.
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20210301234928.4298-5-jeff@labundy.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

drivers/input/misc/Kconfig

@@ -752,6 +752,17 @@ config INPUT_IQS269A
 	  To compile this driver as a module, choose M here: the
 	  module will be called iqs269a.
 
+config INPUT_IQS626A
+	tristate "Azoteq IQS626A capacitive touch controller"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Say Y to enable support for the Azoteq IQS626A capacitive
+	  touch controller.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called iqs626a.
+
 config INPUT_CMA3000
 	tristate "VTI CMA3000 Tri-axis accelerometer"
 	help

drivers/input/misc/Makefile

@@ -42,6 +42,7 @@ obj-$(CONFIG_INPUT_HISI_POWERKEY)	+= hisi_powerkey.o
 obj-$(CONFIG_HP_SDC_RTC)		+= hp_sdc_rtc.o
 obj-$(CONFIG_INPUT_IMS_PCU)		+= ims-pcu.o
 obj-$(CONFIG_INPUT_IQS269A)		+= iqs269a.o
+obj-$(CONFIG_INPUT_IQS626A)		+= iqs626a.o
 obj-$(CONFIG_INPUT_IXP4XX_BEEPER)	+= ixp4xx-beeper.o
 obj-$(CONFIG_INPUT_KEYSPAN_REMOTE)	+= keyspan_remote.o
 obj-$(CONFIG_INPUT_KXTJ9)		+= kxtj9.o

drivers/input/misc/iqs626a.c

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Azoteq IQS626A Capacitive Touch Controller
+ *
+ * Copyright (C) 2020 Jeff LaBundy <jeff@labundy.com>
+ *
+ * This driver registers up to 2 input devices: one representing capacitive or
+ * inductive keys as well as Hall-effect switches, and one for a trackpad that
+ * can express various gestures.
+ */
+
+#include <linux/bits.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input/touchscreen.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define IQS626_VER_INFO				0x00
+#define IQS626_VER_INFO_PROD_NUM		0x51
+
+#define IQS626_SYS_FLAGS			0x02
+#define IQS626_SYS_FLAGS_SHOW_RESET		BIT(15)
+#define IQS626_SYS_FLAGS_IN_ATI			BIT(12)
+#define IQS626_SYS_FLAGS_PWR_MODE_MASK		GENMASK(9, 8)
+#define IQS626_SYS_FLAGS_PWR_MODE_SHIFT		8
+
+#define IQS626_HALL_OUTPUT			0x23
+
+#define IQS626_SYS_SETTINGS			0x80
+#define IQS626_SYS_SETTINGS_CLK_DIV		BIT(15)
+#define IQS626_SYS_SETTINGS_ULP_AUTO		BIT(14)
+#define IQS626_SYS_SETTINGS_DIS_AUTO		BIT(13)
+#define IQS626_SYS_SETTINGS_PWR_MODE_MASK	GENMASK(12, 11)
+#define IQS626_SYS_SETTINGS_PWR_MODE_SHIFT	11
+#define IQS626_SYS_SETTINGS_PWR_MODE_MAX	3
+#define IQS626_SYS_SETTINGS_ULP_UPDATE_MASK	GENMASK(10, 8)
+#define IQS626_SYS_SETTINGS_ULP_UPDATE_SHIFT	8
+#define IQS626_SYS_SETTINGS_ULP_UPDATE_MAX	7
+#define IQS626_SYS_SETTINGS_EVENT_MODE		BIT(5)
+#define IQS626_SYS_SETTINGS_EVENT_MODE_LP	BIT(4)
+#define IQS626_SYS_SETTINGS_REDO_ATI		BIT(2)
+#define IQS626_SYS_SETTINGS_ACK_RESET		BIT(0)
+
+#define IQS626_MISC_A_ATI_BAND_DISABLE		BIT(7)
+#define IQS626_MISC_A_TPx_LTA_UPDATE_MASK	GENMASK(6, 4)
+#define IQS626_MISC_A_TPx_LTA_UPDATE_SHIFT	4
+#define IQS626_MISC_A_TPx_LTA_UPDATE_MAX	7
+#define IQS626_MISC_A_ATI_LP_ONLY		BIT(3)
+#define IQS626_MISC_A_GPIO3_SELECT_MASK		GENMASK(2, 0)
+#define IQS626_MISC_A_GPIO3_SELECT_MAX		7
+
+#define IQS626_EVENT_MASK_SYS			BIT(6)
+#define IQS626_EVENT_MASK_GESTURE		BIT(3)
+#define IQS626_EVENT_MASK_DEEP			BIT(2)
+#define IQS626_EVENT_MASK_TOUCH			BIT(1)
+#define IQS626_EVENT_MASK_PROX			BIT(0)
+
+#define IQS626_RATE_NP_MS_MAX			255
+#define IQS626_RATE_LP_MS_MAX			255
+#define IQS626_RATE_ULP_MS_MAX			4080
+#define IQS626_TIMEOUT_PWR_MS_MAX		130560
+#define IQS626_TIMEOUT_LTA_MS_MAX		130560
+
+#define IQS626_MISC_B_RESEED_UI_SEL_MASK	GENMASK(7, 6)
+#define IQS626_MISC_B_RESEED_UI_SEL_SHIFT	6
+#define IQS626_MISC_B_RESEED_UI_SEL_MAX		3
+#define IQS626_MISC_B_THRESH_EXTEND		BIT(5)
+#define IQS626_MISC_B_TRACKING_UI_ENABLE	BIT(4)
+#define IQS626_MISC_B_TPx_SWIPE			BIT(3)
+#define IQS626_MISC_B_RESEED_OFFSET		BIT(2)
+#define IQS626_MISC_B_FILT_STR_TPx		GENMASK(1, 0)
+
+#define IQS626_THRESH_SWIPE_MAX			255
+#define IQS626_TIMEOUT_TAP_MS_MAX		4080
+#define IQS626_TIMEOUT_SWIPE_MS_MAX		4080
+
+#define IQS626_CHx_ENG_0_MEAS_CAP_SIZE		BIT(7)
+#define IQS626_CHx_ENG_0_RX_TERM_VSS		BIT(5)
+#define IQS626_CHx_ENG_0_LINEARIZE		BIT(4)
+#define IQS626_CHx_ENG_0_DUAL_DIR		BIT(3)
+#define IQS626_CHx_ENG_0_FILT_DISABLE		BIT(2)
+#define IQS626_CHx_ENG_0_ATI_MODE_MASK		GENMASK(1, 0)
+#define IQS626_CHx_ENG_0_ATI_MODE_MAX		3
+
+#define IQS626_CHx_ENG_1_CCT_HIGH_1		BIT(7)
+#define IQS626_CHx_ENG_1_CCT_HIGH_0		BIT(6)
+#define IQS626_CHx_ENG_1_PROJ_BIAS_MASK		GENMASK(5, 4)
+#define IQS626_CHx_ENG_1_PROJ_BIAS_SHIFT	4
+#define IQS626_CHx_ENG_1_PROJ_BIAS_MAX		3
+#define IQS626_CHx_ENG_1_CCT_ENABLE		BIT(3)
+#define IQS626_CHx_ENG_1_SENSE_FREQ_MASK	GENMASK(2, 1)
+#define IQS626_CHx_ENG_1_SENSE_FREQ_SHIFT	1
+#define IQS626_CHx_ENG_1_SENSE_FREQ_MAX		3
+#define IQS626_CHx_ENG_1_ATI_BAND_TIGHTEN	BIT(0)
+
+#define IQS626_CHx_ENG_2_LOCAL_CAP_MASK		GENMASK(7, 6)
+#define IQS626_CHx_ENG_2_LOCAL_CAP_SHIFT	6
+#define IQS626_CHx_ENG_2_LOCAL_CAP_MAX		3
+#define IQS626_CHx_ENG_2_LOCAL_CAP_ENABLE	BIT(5)
+#define IQS626_CHx_ENG_2_SENSE_MODE_MASK	GENMASK(3, 0)
+#define IQS626_CHx_ENG_2_SENSE_MODE_MAX		15
+
+#define IQS626_CHx_ENG_3_TX_FREQ_MASK		GENMASK(5, 4)
+#define IQS626_CHx_ENG_3_TX_FREQ_SHIFT		4
+#define IQS626_CHx_ENG_3_TX_FREQ_MAX		3
+#define IQS626_CHx_ENG_3_INV_LOGIC		BIT(0)
+
+#define IQS626_CHx_ENG_4_RX_TERM_VREG		BIT(6)
+#define IQS626_CHx_ENG_4_CCT_LOW_1		BIT(5)
+#define IQS626_CHx_ENG_4_CCT_LOW_0		BIT(4)
+#define IQS626_CHx_ENG_4_COMP_DISABLE		BIT(1)
+#define IQS626_CHx_ENG_4_STATIC_ENABLE		BIT(0)
+
+#define IQS626_TPx_ATI_BASE_MIN			45
+#define IQS626_TPx_ATI_BASE_MAX			300
+#define IQS626_CHx_ATI_BASE_MASK		GENMASK(7, 6)
+#define IQS626_CHx_ATI_BASE_75			0x00
+#define IQS626_CHx_ATI_BASE_100			0x40
+#define IQS626_CHx_ATI_BASE_150			0x80
+#define IQS626_CHx_ATI_BASE_200			0xC0
+#define IQS626_CHx_ATI_TARGET_MASK		GENMASK(5, 0)
+#define IQS626_CHx_ATI_TARGET_MAX		2016
+
+#define IQS626_CHx_THRESH_MAX			255
+#define IQS626_CHx_HYST_DEEP_MASK		GENMASK(7, 4)
+#define IQS626_CHx_HYST_DEEP_SHIFT		4
+#define IQS626_CHx_HYST_TOUCH_MASK		GENMASK(3, 0)
+#define IQS626_CHx_HYST_MAX			15
+
+#define IQS626_FILT_STR_NP_TPx_MASK		GENMASK(7, 6)
+#define IQS626_FILT_STR_NP_TPx_SHIFT		6
+#define IQS626_FILT_STR_LP_TPx_MASK		GENMASK(5, 4)
+#define IQS626_FILT_STR_LP_TPx_SHIFT		4
+
+#define IQS626_FILT_STR_NP_CNT_MASK		GENMASK(7, 6)
+#define IQS626_FILT_STR_NP_CNT_SHIFT		6
+#define IQS626_FILT_STR_LP_CNT_MASK		GENMASK(5, 4)
+#define IQS626_FILT_STR_LP_CNT_SHIFT		4
+#define IQS626_FILT_STR_NP_LTA_MASK		GENMASK(3, 2)
+#define IQS626_FILT_STR_NP_LTA_SHIFT		2
+#define IQS626_FILT_STR_LP_LTA_MASK		GENMASK(1, 0)
+#define IQS626_FILT_STR_MAX			3
+
+#define IQS626_ULP_PROJ_ENABLE			BIT(4)
+#define IQS626_GEN_WEIGHT_MAX			255
+
+#define IQS626_MAX_REG				0xFF
+
+#define IQS626_NUM_CH_TP_3			9
+#define IQS626_NUM_CH_TP_2			6
+#define IQS626_NUM_CH_GEN			3
+#define IQS626_NUM_CRx_TX			8
+
+#define IQS626_PWR_MODE_POLL_SLEEP_US		50000
+#define IQS626_PWR_MODE_POLL_TIMEOUT_US		500000
+
+#define iqs626_irq_wait()			usleep_range(350, 400)
+
+enum iqs626_ch_id {
+	IQS626_CH_ULP_0,
+	IQS626_CH_TP_2,
+	IQS626_CH_TP_3,
+	IQS626_CH_GEN_0,
+	IQS626_CH_GEN_1,
+	IQS626_CH_GEN_2,
+	IQS626_CH_HALL,
+};
+
+enum iqs626_rx_inactive {
+	IQS626_RX_INACTIVE_VSS,
+	IQS626_RX_INACTIVE_FLOAT,
+	IQS626_RX_INACTIVE_VREG,
+};
+
+enum iqs626_st_offs {
+	IQS626_ST_OFFS_PROX,
+	IQS626_ST_OFFS_DIR,
+	IQS626_ST_OFFS_TOUCH,
+	IQS626_ST_OFFS_DEEP,
+};
+
+enum iqs626_th_offs {
+	IQS626_TH_OFFS_PROX,
+	IQS626_TH_OFFS_TOUCH,
+	IQS626_TH_OFFS_DEEP,
+};
+
+enum iqs626_event_id {
+	IQS626_EVENT_PROX_DN,
+	IQS626_EVENT_PROX_UP,
+	IQS626_EVENT_TOUCH_DN,
+	IQS626_EVENT_TOUCH_UP,
+	IQS626_EVENT_DEEP_DN,
+	IQS626_EVENT_DEEP_UP,
+};
+
+enum iqs626_gesture_id {
+	IQS626_GESTURE_FLICK_X_POS,
+	IQS626_GESTURE_FLICK_X_NEG,
+	IQS626_GESTURE_FLICK_Y_POS,
+	IQS626_GESTURE_FLICK_Y_NEG,
+	IQS626_GESTURE_TAP,
+	IQS626_GESTURE_HOLD,
+	IQS626_NUM_GESTURES,
+};
+
+struct iqs626_event_desc {
+	const char *name;
+	enum iqs626_st_offs st_offs;
+	enum iqs626_th_offs th_offs;
+	bool dir_up;
+	u8 mask;
+};
+
+static const struct iqs626_event_desc iqs626_events[] = {
+	[IQS626_EVENT_PROX_DN] = {
+		.name = "event-prox",
+		.st_offs = IQS626_ST_OFFS_PROX,
+		.th_offs = IQS626_TH_OFFS_PROX,
+		.mask = IQS626_EVENT_MASK_PROX,
+	},
+	[IQS626_EVENT_PROX_UP] = {
+		.name = "event-prox-alt",
+		.st_offs = IQS626_ST_OFFS_PROX,
+		.th_offs = IQS626_TH_OFFS_PROX,
+		.dir_up = true,
+		.mask = IQS626_EVENT_MASK_PROX,
+	},
+	[IQS626_EVENT_TOUCH_DN] = {
+		.name = "event-touch",
+		.st_offs = IQS626_ST_OFFS_TOUCH,
+		.th_offs = IQS626_TH_OFFS_TOUCH,
+		.mask = IQS626_EVENT_MASK_TOUCH,
+	},
+	[IQS626_EVENT_TOUCH_UP] = {
+		.name = "event-touch-alt",
+		.st_offs = IQS626_ST_OFFS_TOUCH,
+		.th_offs = IQS626_TH_OFFS_TOUCH,
+		.dir_up = true,
+		.mask = IQS626_EVENT_MASK_TOUCH,
+	},
+	[IQS626_EVENT_DEEP_DN] = {
+		.name = "event-deep",
+		.st_offs = IQS626_ST_OFFS_DEEP,
+		.th_offs = IQS626_TH_OFFS_DEEP,
+		.mask = IQS626_EVENT_MASK_DEEP,
+	},
+	[IQS626_EVENT_DEEP_UP] = {
+		.name = "event-deep-alt",
+		.st_offs = IQS626_ST_OFFS_DEEP,
+		.th_offs = IQS626_TH_OFFS_DEEP,
+		.dir_up = true,
+		.mask = IQS626_EVENT_MASK_DEEP,
+	},
+};
+
+struct iqs626_ver_info {
+	u8 prod_num;
+	u8 sw_num;
+	u8 hw_num;
+	u8 padding;
+} __packed;
+
+struct iqs626_flags {
+	__be16 system;
+	u8 gesture;
+	u8 padding_a;
+	u8 states[4];
+	u8 ref_active;
+	u8 padding_b;
+	u8 comp_min;
+	u8 comp_max;
+	u8 trackpad_x;
+	u8 trackpad_y;
+} __packed;
+
+struct iqs626_ch_reg_ulp {
+	u8 thresh[2];
+	u8 hyst;
+	u8 filter;
+	u8 engine[2];
+	u8 ati_target;
+	u8 padding;
+	__be16 ati_comp;
+	u8 rx_enable;
+	u8 tx_enable;
+} __packed;
+
+struct iqs626_ch_reg_tp {
+	u8 thresh;
+	u8 ati_base;
+	__be16 ati_comp;
+} __packed;
+
+struct iqs626_tp_grp_reg {
+	u8 hyst;
+	u8 ati_target;
+	u8 engine[2];
+	struct iqs626_ch_reg_tp ch_reg_tp[IQS626_NUM_CH_TP_3];
+} __packed;
+
+struct iqs626_ch_reg_gen {
+	u8 thresh[3];
+	u8 padding;
+	u8 hyst;
+	u8 ati_target;
+	__be16 ati_comp;
+	u8 engine[5];
+	u8 filter;
+	u8 rx_enable;
+	u8 tx_enable;
+	u8 assoc_select;
+	u8 assoc_weight;
+} __packed;
+
+struct iqs626_ch_reg_hall {
+	u8 engine;
+	u8 thresh;
+	u8 hyst;
+	u8 ati_target;
+	__be16 ati_comp;
+} __packed;
+
+struct iqs626_sys_reg {
+	__be16 general;
+	u8 misc_a;
+	u8 event_mask;
+	u8 active;
+	u8 reseed;
+	u8 rate_np;
+	u8 rate_lp;
+	u8 rate_ulp;
+	u8 timeout_pwr;
+	u8 timeout_rdy;
+	u8 timeout_lta;
+	u8 misc_b;
+	u8 thresh_swipe;
+	u8 timeout_tap;
+	u8 timeout_swipe;
+	u8 redo_ati;
+	u8 padding;
+	struct iqs626_ch_reg_ulp ch_reg_ulp;
+	struct iqs626_tp_grp_reg tp_grp_reg;
+	struct iqs626_ch_reg_gen ch_reg_gen[IQS626_NUM_CH_GEN];
+	struct iqs626_ch_reg_hall ch_reg_hall;
+} __packed;
+
+struct iqs626_channel_desc {
+	const char *name;
+	int num_ch;
+	u8 active;
+	bool events[ARRAY_SIZE(iqs626_events)];
+};
+
+static const struct iqs626_channel_desc iqs626_channels[] = {
+	[IQS626_CH_ULP_0] = {
+		.name = "ulp-0",
+		.num_ch = 1,
+		.active = BIT(0),
+		.events = {
+			[IQS626_EVENT_PROX_DN] = true,
+			[IQS626_EVENT_PROX_UP] = true,
+			[IQS626_EVENT_TOUCH_DN] = true,
+			[IQS626_EVENT_TOUCH_UP] = true,
+		},
+	},
+	[IQS626_CH_TP_2] = {
+		.name = "trackpad-3x2",
+		.num_ch = IQS626_NUM_CH_TP_2,
+		.active = BIT(1),
+		.events = {
+			[IQS626_EVENT_TOUCH_DN] = true,
+		},
+	},
+	[IQS626_CH_TP_3] = {
+		.name = "trackpad-3x3",
+		.num_ch = IQS626_NUM_CH_TP_3,
+		.active = BIT(2) | BIT(1),
+		.events = {
+			[IQS626_EVENT_TOUCH_DN] = true,
+		},
+	},
+	[IQS626_CH_GEN_0] = {
+		.name = "generic-0",
+		.num_ch = 1,
+		.active = BIT(4),
+		.events = {
+			[IQS626_EVENT_PROX_DN] = true,
+			[IQS626_EVENT_PROX_UP] = true,
+			[IQS626_EVENT_TOUCH_DN] = true,
+			[IQS626_EVENT_TOUCH_UP] = true,
+			[IQS626_EVENT_DEEP_DN] = true,
+			[IQS626_EVENT_DEEP_UP] = true,
+		},
+	},
+	[IQS626_CH_GEN_1] = {
+		.name = "generic-1",
+		.num_ch = 1,
+		.active = BIT(5),
+		.events = {
+			[IQS626_EVENT_PROX_DN] = true,
+			[IQS626_EVENT_PROX_UP] = true,
+			[IQS626_EVENT_TOUCH_DN] = true,
+			[IQS626_EVENT_TOUCH_UP] = true,
+			[IQS626_EVENT_DEEP_DN] = true,
+			[IQS626_EVENT_DEEP_UP] = true,
+		},
+	},
+	[IQS626_CH_GEN_2] = {
+		.name = "generic-2",
+		.num_ch = 1,
+		.active = BIT(6),
+		.events = {
+			[IQS626_EVENT_PROX_DN] = true,
+			[IQS626_EVENT_PROX_UP] = true,
+			[IQS626_EVENT_TOUCH_DN] = true,
+			[IQS626_EVENT_TOUCH_UP] = true,
+			[IQS626_EVENT_DEEP_DN] = true,
+			[IQS626_EVENT_DEEP_UP] = true,
+		},
+	},
+	[IQS626_CH_HALL] = {
+		.name = "hall",
+		.num_ch = 1,
+		.active = BIT(7),
+		.events = {
+			[IQS626_EVENT_TOUCH_DN] = true,
+			[IQS626_EVENT_TOUCH_UP] = true,
+		},
+	},
+};
+
+struct iqs626_private {
+	struct i2c_client *client;
+	struct regmap *regmap;
+	struct iqs626_sys_reg sys_reg;
+	struct completion ati_done;
+	struct input_dev *keypad;
+	struct input_dev *trackpad;
+	struct touchscreen_properties prop;
+	unsigned int kp_type[ARRAY_SIZE(iqs626_channels)]
+			    [ARRAY_SIZE(iqs626_events)];
+	unsigned int kp_code[ARRAY_SIZE(iqs626_channels)]
+			    [ARRAY_SIZE(iqs626_events)];
+	unsigned int tp_code[IQS626_NUM_GESTURES];
+	unsigned int suspend_mode;
+};
+
+static int iqs626_parse_events(struct iqs626_private *iqs626,
+			       const struct fwnode_handle *ch_node,
+			       enum iqs626_ch_id ch_id)
+{
+	struct iqs626_sys_reg *sys_reg = &iqs626->sys_reg;
+	struct i2c_client *client = iqs626->client;
+	const struct fwnode_handle *ev_node;
+	const char *ev_name;
+	u8 *thresh, *hyst;
+	unsigned int thresh_tp[IQS626_NUM_CH_TP_3];
+	unsigned int val;
+	int num_ch = iqs626_channels[ch_id].num_ch;
+	int error, i, j;
+
+	switch (ch_id) {
+	case IQS626_CH_ULP_0:
+		thresh = sys_reg->ch_reg_ulp.thresh;
+		hyst = &sys_reg->ch_reg_ulp.hyst;
+		break;
+
+	case IQS626_CH_TP_2:
+	case IQS626_CH_TP_3:
+		thresh = &sys_reg->tp_grp_reg.ch_reg_tp[0].thresh;
+		hyst = &sys_reg->tp_grp_reg.hyst;
+		break;
+
+	case IQS626_CH_GEN_0:
+	case IQS626_CH_GEN_1:
+	case IQS626_CH_GEN_2:
+		i = ch_id - IQS626_CH_GEN_0;
+		thresh = sys_reg->ch_reg_gen[i].thresh;
+		hyst = &sys_reg->ch_reg_gen[i].hyst;
+		break;
+
+	case IQS626_CH_HALL:
+		thresh = &sys_reg->ch_reg_hall.thresh;
+		hyst = &sys_reg->ch_reg_hall.hyst;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(iqs626_events); i++) {
+		if (!iqs626_channels[ch_id].events[i])
+			continue;
+
+		if (ch_id == IQS626_CH_TP_2 || ch_id == IQS626_CH_TP_3) {
+			/*
+			 * Trackpad touch events are simply described under the
+			 * trackpad child node.
+			 */
+			ev_node = ch_node;
+		} else {
+			ev_name = iqs626_events[i].name;
+			ev_node = fwnode_get_named_child_node(ch_node, ev_name);
+			if (!ev_node)
+				continue;
+
+			if (!fwnode_property_read_u32(ev_node, "linux,code",
+						      &val)) {
+				iqs626->kp_code[ch_id][i] = val;
+
+				if (fwnode_property_read_u32(ev_node,
+							     "linux,input-type",
+							     &val)) {
+					if (ch_id == IQS626_CH_HALL)
+						val = EV_SW;
+					else
+						val = EV_KEY;
+				}
+
+				if (val != EV_KEY && val != EV_SW) {
+					dev_err(&client->dev,
+						"Invalid input type: %u\n",
+						val);
+					return -EINVAL;
+				}
+
+				iqs626->kp_type[ch_id][i] = val;
+
+				sys_reg->event_mask &= ~iqs626_events[i].mask;
+			}
+		}
+
+		if (!fwnode_property_read_u32(ev_node, "azoteq,hyst", &val)) {
+			if (val > IQS626_CHx_HYST_MAX) {
+				dev_err(&client->dev,
+					"Invalid %s channel hysteresis: %u\n",
+					fwnode_get_name(ch_node), val);
+				return -EINVAL;
+			}
+
+			if (i == IQS626_EVENT_DEEP_DN ||
+			    i == IQS626_EVENT_DEEP_UP) {
+				*hyst &= ~IQS626_CHx_HYST_DEEP_MASK;
+				*hyst |= (val << IQS626_CHx_HYST_DEEP_SHIFT);
+			} else if (i == IQS626_EVENT_TOUCH_DN ||
+				   i == IQS626_EVENT_TOUCH_UP) {
+				*hyst &= ~IQS626_CHx_HYST_TOUCH_MASK;
+				*hyst |= val;
+			}
+		}
+
+		if (ch_id != IQS626_CH_TP_2 && ch_id != IQS626_CH_TP_3 &&
+		    !fwnode_property_read_u32(ev_node, "azoteq,thresh", &val)) {
+			if (val > IQS626_CHx_THRESH_MAX) {
+				dev_err(&client->dev,
+					"Invalid %s channel threshold: %u\n",
+					fwnode_get_name(ch_node), val);
+				return -EINVAL;
+			}
+
+			if (ch_id == IQS626_CH_HALL)
+				*thresh = val;
+			else
+				*(thresh + iqs626_events[i].th_offs) = val;
+
+			continue;
+		}
+
+		if (!fwnode_property_present(ev_node, "azoteq,thresh"))
+			continue;
+
+		error = fwnode_property_read_u32_array(ev_node, "azoteq,thresh",
+						       thresh_tp, num_ch);
+		if (error) {
+			dev_err(&client->dev,
+				"Failed to read %s channel thresholds: %d\n",
+				fwnode_get_name(ch_node), error);
+			return error;
+		}
+
+		for (j = 0; j < num_ch; j++) {
+			if (thresh_tp[j] > IQS626_CHx_THRESH_MAX) {
+				dev_err(&client->dev,
+					"Invalid %s channel threshold: %u\n",
+					fwnode_get_name(ch_node), thresh_tp[j]);
+				return -EINVAL;
+			}
+
+			sys_reg->tp_grp_reg.ch_reg_tp[j].thresh = thresh_tp[j];
+		}
+	}
+
+	return 0;
+}
+
+static int iqs626_parse_ati_target(struct iqs626_private *iqs626,
+				   const struct fwnode_handle *ch_node,
+				   enum iqs626_ch_id ch_id)
+{
+	struct iqs626_sys_reg *sys_reg = &iqs626->sys_reg;
+	struct i2c_client *client = iqs626->client;
+	unsigned int ati_base[IQS626_NUM_CH_TP_3];
+	unsigned int val;
+	u8 *ati_target;
+	int num_ch = iqs626_channels[ch_id].num_ch;
+	int error, i;
+
+	switch (ch_id) {
+	case IQS626_CH_ULP_0:
+		ati_target = &sys_reg->ch_reg_ulp.ati_target;
+		break;
+
+	case IQS626_CH_TP_2:
+	case IQS626_CH_TP_3:
+		ati_target = &sys_reg->tp_grp_reg.ati_target;
+		break;
+
+	case IQS626_CH_GEN_0:
+	case IQS626_CH_GEN_1:
+	case IQS626_CH_GEN_2:
+		i = ch_id - IQS626_CH_GEN_0;
+		ati_target = &sys_reg->ch_reg_gen[i].ati_target;
+		break;
+
+	case IQS626_CH_HALL:
+		ati_target = &sys_reg->ch_reg_hall.ati_target;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	if (!fwnode_property_read_u32(ch_node, "azoteq,ati-target", &val)) {
+		if (val > IQS626_CHx_ATI_TARGET_MAX) {
+			dev_err(&client->dev,
+				"Invalid %s channel ATI target: %u\n",
+				fwnode_get_name(ch_node), val);
+			return -EINVAL;
+		}
+
+		*ati_target &= ~IQS626_CHx_ATI_TARGET_MASK;
+		*ati_target |= (val / 32);
+	}
+
+	if (ch_id != IQS626_CH_TP_2 && ch_id != IQS626_CH_TP_3 &&
+	    !fwnode_property_read_u32(ch_node, "azoteq,ati-base", &val)) {
+		switch (val) {
+		case 75:
+			val = IQS626_CHx_ATI_BASE_75;
+			break;
+
+		case 100:
+			val = IQS626_CHx_ATI_BASE_100;
+			break;
+
+		case 150:
+			val = IQS626_CHx_ATI_BASE_150;
+			break;
+
+		case 200:
+			val = IQS626_CHx_ATI_BASE_200;
+			break;
+
+		default:
+			dev_err(&client->dev,
+				"Invalid %s channel ATI base: %u\n",
+				fwnode_get_name(ch_node), val);
+			return -EINVAL;
+		}
+
+		*ati_target &= ~IQS626_CHx_ATI_BASE_MASK;
+		*ati_target |= val;
+
+		return 0;
+	}
+
+	if (!fwnode_property_present(ch_node, "azoteq,ati-base"))
+		return 0;
+
+	error = fwnode_property_read_u32_array(ch_node, "azoteq,ati-base",
+					       ati_base, num_ch);
+	if (error) {
+		dev_err(&client->dev,
+			"Failed to read %s channel ATI bases: %d\n",
+			fwnode_get_name(ch_node), error);
+		return error;
+	}
+
+	for (i = 0; i < num_ch; i++) {
+		if (ati_base[i] < IQS626_TPx_ATI_BASE_MIN ||
+		    ati_base[i] > IQS626_TPx_ATI_BASE_MAX) {
+			dev_err(&client->dev,
+				"Invalid %s channel ATI base: %u\n",
+				fwnode_get_name(ch_node), ati_base[i]);
+			return -EINVAL;
+		}
+
+		ati_base[i] -= IQS626_TPx_ATI_BASE_MIN;
+		sys_reg->tp_grp_reg.ch_reg_tp[i].ati_base = ati_base[i];
+	}
+
+	return 0;
+}
+
+static int iqs626_parse_pins(struct iqs626_private *iqs626,
+			     const struct fwnode_handle *ch_node,
+			     const char *propname, u8 *enable)
+{
+	struct i2c_client *client = iqs626->client;
+	unsigned int val[IQS626_NUM_CRx_TX];
+	int error, count, i;
+
+	if (!fwnode_property_present(ch_node, propname))
+		return 0;
+
+	count = fwnode_property_count_u32(ch_node, propname);
+	if (count > IQS626_NUM_CRx_TX) {
+		dev_err(&client->dev,
+			"Too many %s channel CRX/TX pins present\n",
+			fwnode_get_name(ch_node));
+		return -EINVAL;
+	} else if (count < 0) {
+		dev_err(&client->dev,
+			"Failed to count %s channel CRX/TX pins: %d\n",
+			fwnode_get_name(ch_node), count);
+		return count;
+	}
+
+	error = fwnode_property_read_u32_array(ch_node, propname, val, count);
+	if (error) {
+		dev_err(&client->dev,
+			"Failed to read %s channel CRX/TX pins: %d\n",
+			fwnode_get_name(ch_node), error);
+		return error;
+	}
+
+	*enable = 0;
+
+	for (i = 0; i < count; i++) {
+		if (val[i] >= IQS626_NUM_CRx_TX) {
+			dev_err(&client->dev,
+				"Invalid %s channel CRX/TX pin: %u\n",
+				fwnode_get_name(ch_node), val[i]);
+			return -EINVAL;
+		}
+
+		*enable |= BIT(val[i]);
+	}
+
+	return 0;
+}
+
+static int iqs626_parse_trackpad(struct iqs626_private *iqs626,
+				 const struct fwnode_handle *ch_node)
+{
+	struct iqs626_sys_reg *sys_reg = &iqs626->sys_reg;
+	struct i2c_client *client = iqs626->client;
+	u8 *hyst = &sys_reg->tp_grp_reg.hyst;
+	unsigned int val;
+	int error, count;
+
+	if (!fwnode_property_read_u32(ch_node, "azoteq,lta-update", &val)) {
+		if (val > IQS626_MISC_A_TPx_LTA_UPDATE_MAX) {
+			dev_err(&client->dev,
+				"Invalid %s channel update rate: %u\n",
+				fwnode_get_name(ch_node), val);
+			return -EINVAL;
+		}
+
+		sys_reg->misc_a &= ~IQS626_MISC_A_TPx_LTA_UPDATE_MASK;
+		sys_reg->misc_a |= (val << IQS626_MISC_A_TPx_LTA_UPDATE_SHIFT);
+	}
+
+	if (!fwnode_property_read_u32(ch_node, "azoteq,filt-str-trackpad",
+				      &val)) {
+		if (val > IQS626_FILT_STR_MAX) {
+			dev_err(&client->dev,
+				"Invalid %s channel filter strength: %u\n",
+				fwnode_get_name(ch_node), val);
+			return -EINVAL;
+		}
+
+		sys_reg->misc_b &= ~IQS626_MISC_B_FILT_STR_TPx;
+		sys_reg->misc_b |= val;
+	}
+
+	if (!fwnode_property_read_u32(ch_node, "azoteq,filt-str-np-cnt",
+				      &val)) {
+		if (val > IQS626_FILT_STR_MAX) {
+			dev_err(&client->dev,
+				"Invalid %s channel filter strength: %u\n",
+				fwnode_get_name(ch_node), val);
+			return -EINVAL;
+		}
+
+		*hyst &= ~IQS626_FILT_STR_NP_TPx_MASK;
+		*hyst |= (val << IQS626_FILT_STR_NP_TPx_SHIFT);
+	}
+
+	if (!fwnode_property_read_u32(ch_node, "azoteq,filt-str-lp-cnt",
+				      &val)) {
+		if (val > IQS626_FILT_STR_MAX) {
+			dev_err(&client->dev,
+				"Invalid %s channel filter strength: %u\n",
+				fwnode_get_name(ch_node), val);
+			return -EINVAL;
+		}
+
+		*hyst &= ~IQS626_FILT_STR_LP_TPx_MASK;
+		*hyst |= (val << IQS626_FILT_STR_LP_TPx_SHIFT);
+	}
+
+	if (!fwnode_property_present(ch_node, "linux,keycodes"))
+		return 0;
+
+	count = fwnode_property_count_u32(ch_node, "linux,keycodes");
+	if (count > IQS626_NUM_GESTURES) {
+		dev_err(&client->dev, "Too many keycodes present\n");
+		return -EINVAL;
+	} else if (count < 0) {
+		dev_err(&client->dev, "Failed to count keycodes: %d\n", count);
+		return count;
+	}
+
+	error = fwnode_property_read_u32_array(ch_node, "linux,keycodes",
+					       iqs626->tp_code, count);
+	if (error) {
+		dev_err(&client->dev, "Failed to read keycodes: %d\n", error);
+		return error;
+	}
+
+	sys_reg->misc_b &= ~IQS626_MISC_B_TPx_SWIPE;
+	if (fwnode_property_present(ch_node, "azoteq,gesture-swipe"))
+		sys_reg->misc_b |= IQS626_MISC_B_TPx_SWIPE;
+
+	if (!fwnode_property_read_u32(ch_node, "azoteq,timeout-tap-ms",
+				      &val)) {
+		if (val > IQS626_TIMEOUT_TAP_MS_MAX) {
+			dev_err(&client->dev,
+				"Invalid %s channel timeout: %u\n",
+				fwnode_get_name(ch_node), val);
+			return -EINVAL;
+		}
+
+		sys_reg->timeout_tap = val / 16;
+	}
+
+	if (!fwnode_property_read_u32(ch_node, "azoteq,timeout-swipe-ms",
+				      &val)) {
+		if (val > IQS626_TIMEOUT_SWIPE_MS_MAX) {
+			dev_err(&client->dev,
+				"Invalid %s channel timeout: %u\n",
+				fwnode_get_name(ch_node), val);
+			return -EINVAL;
+		}
+
+		sys_reg->timeout_swipe = val / 16;
+	}
+
+	if (!fwnode_property_read_u32(ch_node, "azoteq,thresh-swipe",
+				      &val)) {
+		if (val > IQS626_THRESH_SWIPE_MAX) {
+			dev_err(&client->dev,
+				"Invalid %s channel threshold: %u\n",
+				fwnode_get_name(ch_node), val);
+			return -EINVAL;
+		}
+
+		sys_reg->thresh_swipe = val;
+	}
+
+	sys_reg->event_mask &= ~IQS626_EVENT_MASK_GESTURE;
+
+	return 0;
+}
+
+static int iqs626_parse_channel(struct iqs626_private *iqs626,
+				const struct fwnode_handle *ch_node,
+				enum iqs626_ch_id ch_id)
+{
+	struct iqs626_sys_reg *sys_reg = &iqs626->sys_reg;
+	struct i2c_client *client = iqs626->client;
+	u8 *engine, *filter, *rx_enable, *tx_enable;
+	u8 *assoc_select, *assoc_weight;
+	unsigned int val;
+	int error, i;
+
+	switch (ch_id) {
+	case IQS626_CH_ULP_0:
+		engine = sys_reg->ch_reg_ulp.engine;
+		break;
+
+	case IQS626_CH_TP_2:
+	case IQS626_CH_TP_3:
+		engine = sys_reg->tp_grp_reg.engine;
+		break;
+
+	case IQS626_CH_GEN_0:
+	case IQS626_CH_GEN_1:
+	case IQS626_CH_GEN_2:
+		i = ch_id - IQS626_CH_GEN_0;
+		engine = sys_reg->ch_reg_gen[i].engine;
+		break;
+
+	case IQS626_CH_HALL:
+		engine = &sys_reg->ch_reg_hall.engine;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	*engine |= IQS626_CHx_ENG_0_MEAS_CAP_SIZE;
+	if (fwnode_property_present(ch_node, "azoteq,meas-cap-decrease"))
+		*engine &= ~IQS626_CHx_ENG_0_MEAS_CAP_SIZE;
+
+	*engine |= IQS626_CHx_ENG_0_RX_TERM_VSS;
+	if (!fwnode_property_read_u32(ch_node, "azoteq,rx-inactive", &val)) {
+		switch (val) {
+		case IQS626_RX_INACTIVE_VSS:
+			break;
+
+		case IQS626_RX_INACTIVE_FLOAT:
+			*engine &= ~IQS626_CHx_ENG_0_RX_TERM_VSS;
+			if (ch_id == IQS626_CH_GEN_0 ||
+			    ch_id == IQS626_CH_GEN_1 ||
+			    ch_id == IQS626_CH_GEN_2)
+				*(engine + 4) &= ~IQS626_CHx_ENG_4_RX_TERM_VREG;
+			break;
+
+		case IQS626_RX_INACTIVE_VREG:
+			if (ch_id == IQS626_CH_GEN_0 ||
+			    ch_id == IQS626_CH_GEN_1 ||
+			    ch_id == IQS626_CH_GEN_2) {
+				*engine &= ~IQS626_CHx_ENG_0_RX_TERM_VSS;
+				*(engine + 4) |= IQS626_CHx_ENG_4_RX_TERM_VREG;
+				break;
+			}
+			fallthrough;
+
+		default:
+			dev_err(&client->dev,
+				"Invalid %s channel CRX pin termination: %u\n",
+				fwnode_get_name(ch_node), val);
+			return -EINVAL;
+		}
+	}
+
+	*engine &= ~IQS626_CHx_ENG_0_LINEARIZE;
+	if (fwnode_property_present(ch_node, "azoteq,linearize"))
+		*engine |= IQS626_CHx_ENG_0_LINEARIZE;
+
+	*engine &= ~IQS626_CHx_ENG_0_DUAL_DIR;
+	if (fwnode_property_present(ch_node, "azoteq,dual-direction"))
+		*engine |= IQS626_CHx_ENG_0_DUAL_DIR;
+
+	*engine &= ~IQS626_CHx_ENG_0_FILT_DISABLE;
+	if (fwnode_property_present(ch_node, "azoteq,filt-disable"))
+		*engine |= IQS626_CHx_ENG_0_FILT_DISABLE;
+
+	if (!fwnode_property_read_u32(ch_node, "azoteq,ati-mode", &val)) {
+		if (val > IQS626_CHx_ENG_0_ATI_MODE_MAX) {
+			dev_err(&client->dev,
+				"Invalid %s channel ATI mode: %u\n",
+				fwnode_get_name(ch_node), val);
+			return -EINVAL;
+		}
+
+		*engine &= ~IQS626_CHx_ENG_0_ATI_MODE_MASK;
+		*engine |= val;
+	}
+
+	if (ch_id == IQS626_CH_HALL)
+		return 0;
+
+	*(engine + 1) &= ~IQS626_CHx_ENG_1_CCT_ENABLE;
+	if (!fwnode_property_read_u32(ch_node, "azoteq,cct-increase",
+				      &val) && val) {
+		unsigned int orig_val = val--;
+
+		/*
+		 * In the case of the generic channels, the charge cycle time
+		 * field doubles in size and straddles two separate registers.
+		 */
+		if (ch_id == IQS626_CH_GEN_0 ||
+		    ch_id == IQS626_CH_GEN_1 ||
+		    ch_id == IQS626_CH_GEN_2) {
+			*(engine + 4) &= ~IQS626_CHx_ENG_4_CCT_LOW_1;
+			if (val & BIT(1))
+				*(engine + 4) |= IQS626_CHx_ENG_4_CCT_LOW_1;
+
+			*(engine + 4) &= ~IQS626_CHx_ENG_4_CCT_LOW_0;
+			if (val & BIT(0))
+				*(engine + 4) |= IQS626_CHx_ENG_4_CCT_LOW_0;
+
+			val >>= 2;
+		}
+
+		if (val & ~GENMASK(1, 0)) {
+			dev_err(&client->dev,
+				"Invalid %s channel charge cycle time: %u\n",
+				fwnode_get_name(ch_node), orig_val);
+			return -EINVAL;
+		}
+
+		*(engine + 1) &= ~IQS626_CHx_ENG_1_CCT_HIGH_1;
+		if (val & BIT(1))
+			*(engine + 1) |= IQS626_CHx_ENG_1_CCT_HIGH_1;
+
+		*(engine + 1) &= ~IQS626_CHx_ENG_1_CCT_HIGH_0;
+		if (val & BIT(0))
+			*(engine + 1) |= IQS626_CHx_ENG_1_CCT_HIGH_0;
+
+		*(engine + 1) |= IQS626_CHx_ENG_1_CCT_ENABLE;
+	}
+
+	if (!fwnode_property_read_u32(ch_node, "azoteq,proj-bias", &val)) {
+		if (val > IQS626_CHx_ENG_1_PROJ_BIAS_MAX) {
+			dev_err(&client->dev,
+				"Invalid %s channel bias current: %u\n",
+				fwnode_get_name(ch_node), val);
+			return -EINVAL;
+		}
+
+		*(engine + 1) &= ~IQS626_CHx_ENG_1_PROJ_BIAS_MASK;
+		*(engine + 1) |= (val << IQS626_CHx_ENG_1_PROJ_BIAS_SHIFT);
+	}
+
+	if (!fwnode_property_read_u32(ch_node, "azoteq,sense-freq", &val)) {
+		if (val > IQS626_CHx_ENG_1_SENSE_FREQ_MAX) {
+			dev_err(&client->dev,
+				"Invalid %s channel sensing frequency: %u\n",
+				fwnode_get_name(ch_node), val);
+			return -EINVAL;
+		}
+
+		*(engine + 1) &= ~IQS626_CHx_ENG_1_SENSE_FREQ_MASK;
+		*(engine + 1) |= (val << IQS626_CHx_ENG_1_SENSE_FREQ_SHIFT);
+	}
+
+	*(engine + 1) &= ~IQS626_CHx_ENG_1_ATI_BAND_TIGHTEN;
+	if (fwnode_property_present(ch_node, "azoteq,ati-band-tighten"))
+		*(engine + 1) |= IQS626_CHx_ENG_1_ATI_BAND_TIGHTEN;
+
+	if (ch_id == IQS626_CH_TP_2 || ch_id == IQS626_CH_TP_3)
+		return iqs626_parse_trackpad(iqs626, ch_node);
+
+	if (ch_id == IQS626_CH_ULP_0) {
+		sys_reg->ch_reg_ulp.hyst &= ~IQS626_ULP_PROJ_ENABLE;
+		if (fwnode_property_present(ch_node, "azoteq,proj-enable"))
+			sys_reg->ch_reg_ulp.hyst |= IQS626_ULP_PROJ_ENABLE;
+
+		filter = &sys_reg->ch_reg_ulp.filter;
+
+		rx_enable = &sys_reg->ch_reg_ulp.rx_enable;
+		tx_enable = &sys_reg->ch_reg_ulp.tx_enable;
+	} else {
+		i = ch_id - IQS626_CH_GEN_0;
+		filter = &sys_reg->ch_reg_gen[i].filter;
+
+		rx_enable = &sys_reg->ch_reg_gen[i].rx_enable;
+		tx_enable = &sys_reg->ch_reg_gen[i].tx_enable;
+	}
+
+	if (!fwnode_property_read_u32(ch_node, "azoteq,filt-str-np-cnt",
+				      &val)) {
+		if (val > IQS626_FILT_STR_MAX) {
+			dev_err(&client->dev,
+				"Invalid %s channel filter strength: %u\n",
+				fwnode_get_name(ch_node), val);
+			return -EINVAL;
+		}
+
+		*filter &= ~IQS626_FILT_STR_NP_CNT_MASK;
+		*filter |= (val << IQS626_FILT_STR_NP_CNT_SHIFT);
+	}
+
+	if (!fwnode_property_read_u32(ch_node, "azoteq,filt-str-lp-cnt",
+				      &val)) {
+		if (val > IQS626_FILT_STR_MAX) {
+			dev_err(&client->dev,
+				"Invalid %s channel filter strength: %u\n",
+				fwnode_get_name(ch_node), val);
+			return -EINVAL;
+		}
+
+		*filter &= ~IQS626_FILT_STR_LP_CNT_MASK;
+		*filter |= (val << IQS626_FILT_STR_LP_CNT_SHIFT);
+	}
+
+	if (!fwnode_property_read_u32(ch_node, "azoteq,filt-str-np-lta",
+				      &val)) {
+		if (val > IQS626_FILT_STR_MAX) {
+			dev_err(&client->dev,
+				"Invalid %s channel filter strength: %u\n",
+				fwnode_get_name(ch_node), val);
+			return -EINVAL;
+		}
+
+		*filter &= ~IQS626_FILT_STR_NP_LTA_MASK;
+		*filter |= (val << IQS626_FILT_STR_NP_LTA_SHIFT);
+	}
+
+	if (!fwnode_property_read_u32(ch_node, "azoteq,filt-str-lp-lta",
+				      &val)) {
+		if (val > IQS626_FILT_STR_MAX) {
+			dev_err(&client->dev,
+				"Invalid %s channel filter strength: %u\n",
+				fwnode_get_name(ch_node), val);
+			return -EINVAL;
+		}
+
+		*filter &= ~IQS626_FILT_STR_LP_LTA_MASK;
+		*filter |= val;
+	}
+
+	error = iqs626_parse_pins(iqs626, ch_node, "azoteq,rx-enable",
+				  rx_enable);
+	if (error)
+		return error;
+
+	error = iqs626_parse_pins(iqs626, ch_node, "azoteq,tx-enable",
+				  tx_enable);
+	if (error)
+		return error;
+
+	if (ch_id == IQS626_CH_ULP_0)
+		return 0;
+
+	*(engine + 2) &= ~IQS626_CHx_ENG_2_LOCAL_CAP_ENABLE;
+	if (!fwnode_property_read_u32(ch_node, "azoteq,local-cap-size",
+				      &val) && val) {
+		unsigned int orig_val = val--;
+
+		if (val > IQS626_CHx_ENG_2_LOCAL_CAP_MAX) {
+			dev_err(&client->dev,
+				"Invalid %s channel local cap. size: %u\n",
+				fwnode_get_name(ch_node), orig_val);
+			return -EINVAL;
+		}
+
+		*(engine + 2) &= ~IQS626_CHx_ENG_2_LOCAL_CAP_MASK;
+		*(engine + 2) |= (val << IQS626_CHx_ENG_2_LOCAL_CAP_SHIFT);
+
+		*(engine + 2) |= IQS626_CHx_ENG_2_LOCAL_CAP_ENABLE;
+	}
+
+	if (!fwnode_property_read_u32(ch_node, "azoteq,sense-mode", &val)) {
+		if (val > IQS626_CHx_ENG_2_SENSE_MODE_MAX) {
+			dev_err(&client->dev,
+				"Invalid %s channel sensing mode: %u\n",
+				fwnode_get_name(ch_node), val);
+			return -EINVAL;
+		}
+
+		*(engine + 2) &= ~IQS626_CHx_ENG_2_SENSE_MODE_MASK;
+		*(engine + 2) |= val;
+	}
+
+	if (!fwnode_property_read_u32(ch_node, "azoteq,tx-freq", &val)) {
+		if (val > IQS626_CHx_ENG_3_TX_FREQ_MAX) {
+			dev_err(&client->dev,
+				"Invalid %s channel excitation frequency: %u\n",
+				fwnode_get_name(ch_node), val);
+			return -EINVAL;
+		}
+
+		*(engine + 3) &= ~IQS626_CHx_ENG_3_TX_FREQ_MASK;
+		*(engine + 3) |= (val << IQS626_CHx_ENG_3_TX_FREQ_SHIFT);
+	}
+
+	*(engine + 3) &= ~IQS626_CHx_ENG_3_INV_LOGIC;
+	if (fwnode_property_present(ch_node, "azoteq,invert-enable"))
+		*(engine + 3) |= IQS626_CHx_ENG_3_INV_LOGIC;
+
+	*(engine + 4) &= ~IQS626_CHx_ENG_4_COMP_DISABLE;
+	if (fwnode_property_present(ch_node, "azoteq,comp-disable"))
+		*(engine + 4) |= IQS626_CHx_ENG_4_COMP_DISABLE;
+
+	*(engine + 4) &= ~IQS626_CHx_ENG_4_STATIC_ENABLE;
+	if (fwnode_property_present(ch_node, "azoteq,static-enable"))
+		*(engine + 4) |= IQS626_CHx_ENG_4_STATIC_ENABLE;
+
+	i = ch_id - IQS626_CH_GEN_0;
+	assoc_select = &sys_reg->ch_reg_gen[i].assoc_select;
+	assoc_weight = &sys_reg->ch_reg_gen[i].assoc_weight;
+
+	*assoc_select = 0;
+	if (!fwnode_property_present(ch_node, "azoteq,assoc-select"))
+		return 0;
+
+	for (i = 0; i < ARRAY_SIZE(iqs626_channels); i++) {
+		if (fwnode_property_match_string(ch_node, "azoteq,assoc-select",
+						 iqs626_channels[i].name) < 0)
+			continue;
+
+		*assoc_select |= iqs626_channels[i].active;
+	}
+
+	if (fwnode_property_read_u32(ch_node, "azoteq,assoc-weight", &val))
+		return 0;
+
+	if (val > IQS626_GEN_WEIGHT_MAX) {
+		dev_err(&client->dev,
+			"Invalid %s channel associated weight: %u\n",
+			fwnode_get_name(ch_node), val);
+		return -EINVAL;
+	}
+
+	*assoc_weight = val;
+
+	return 0;
+}
+
+static int iqs626_parse_prop(struct iqs626_private *iqs626)
+{
+	struct iqs626_sys_reg *sys_reg = &iqs626->sys_reg;
+	struct i2c_client *client = iqs626->client;
+	struct fwnode_handle *ch_node;
+	unsigned int val;
+	int error, i;
+	u16 general;
+
+	if (!device_property_read_u32(&client->dev, "azoteq,suspend-mode",
+				      &val)) {
+		if (val > IQS626_SYS_SETTINGS_PWR_MODE_MAX) {
+			dev_err(&client->dev, "Invalid suspend mode: %u\n",
+				val);
+			return -EINVAL;
+		}
+
+		iqs626->suspend_mode = val;
+	}
+
+	error = regmap_raw_read(iqs626->regmap, IQS626_SYS_SETTINGS, sys_reg,
+				sizeof(*sys_reg));
+	if (error)
+		return error;
+
+	general = be16_to_cpu(sys_reg->general);
+	general &= IQS626_SYS_SETTINGS_ULP_UPDATE_MASK;
+
+	if (device_property_present(&client->dev, "azoteq,clk-div"))
+		general |= IQS626_SYS_SETTINGS_CLK_DIV;
+
+	if (device_property_present(&client->dev, "azoteq,ulp-enable"))
+		general |= IQS626_SYS_SETTINGS_ULP_AUTO;
+
+	if (!device_property_read_u32(&client->dev, "azoteq,ulp-update",
+				      &val)) {
+		if (val > IQS626_SYS_SETTINGS_ULP_UPDATE_MAX) {
+			dev_err(&client->dev, "Invalid update rate: %u\n", val);
+			return -EINVAL;
+		}
+
+		general &= ~IQS626_SYS_SETTINGS_ULP_UPDATE_MASK;
+		general |= (val << IQS626_SYS_SETTINGS_ULP_UPDATE_SHIFT);
+	}
+
+	sys_reg->misc_a &= ~IQS626_MISC_A_ATI_BAND_DISABLE;
+	if (device_property_present(&client->dev, "azoteq,ati-band-disable"))
+		sys_reg->misc_a |= IQS626_MISC_A_ATI_BAND_DISABLE;
+
+	sys_reg->misc_a &= ~IQS626_MISC_A_ATI_LP_ONLY;
+	if (device_property_present(&client->dev, "azoteq,ati-lp-only"))
+		sys_reg->misc_a |= IQS626_MISC_A_ATI_LP_ONLY;
+
+	if (!device_property_read_u32(&client->dev, "azoteq,gpio3-select",
+				      &val)) {
+		if (val > IQS626_MISC_A_GPIO3_SELECT_MAX) {
+			dev_err(&client->dev, "Invalid GPIO3 selection: %u\n",
+				val);
+			return -EINVAL;
+		}
+
+		sys_reg->misc_a &= ~IQS626_MISC_A_GPIO3_SELECT_MASK;
+		sys_reg->misc_a |= val;
+	}
+
+	if (!device_property_read_u32(&client->dev, "azoteq,reseed-select",
+				      &val)) {
+		if (val > IQS626_MISC_B_RESEED_UI_SEL_MAX) {
+			dev_err(&client->dev, "Invalid reseed selection: %u\n",
+				val);
+			return -EINVAL;
+		}
+
+		sys_reg->misc_b &= ~IQS626_MISC_B_RESEED_UI_SEL_MASK;
+		sys_reg->misc_b |= (val << IQS626_MISC_B_RESEED_UI_SEL_SHIFT);
+	}
+
+	sys_reg->misc_b &= ~IQS626_MISC_B_THRESH_EXTEND;
+	if (device_property_present(&client->dev, "azoteq,thresh-extend"))
+		sys_reg->misc_b |= IQS626_MISC_B_THRESH_EXTEND;
+
+	sys_reg->misc_b &= ~IQS626_MISC_B_TRACKING_UI_ENABLE;
+	if (device_property_present(&client->dev, "azoteq,tracking-enable"))
+		sys_reg->misc_b |= IQS626_MISC_B_TRACKING_UI_ENABLE;
+
+	sys_reg->misc_b &= ~IQS626_MISC_B_RESEED_OFFSET;
+	if (device_property_present(&client->dev, "azoteq,reseed-offset"))
+		sys_reg->misc_b |= IQS626_MISC_B_RESEED_OFFSET;
+
+	if (!device_property_read_u32(&client->dev, "azoteq,rate-np-ms",
+				      &val)) {
+		if (val > IQS626_RATE_NP_MS_MAX) {
+			dev_err(&client->dev, "Invalid report rate: %u\n", val);
+			return -EINVAL;
+		}
+
+		sys_reg->rate_np = val;
+	}
+
+	if (!device_property_read_u32(&client->dev, "azoteq,rate-lp-ms",
+				      &val)) {
+		if (val > IQS626_RATE_LP_MS_MAX) {
+			dev_err(&client->dev, "Invalid report rate: %u\n", val);
+			return -EINVAL;
+		}
+
+		sys_reg->rate_lp = val;
+	}
+
+	if (!device_property_read_u32(&client->dev, "azoteq,rate-ulp-ms",
+				      &val)) {
+		if (val > IQS626_RATE_ULP_MS_MAX) {
+			dev_err(&client->dev, "Invalid report rate: %u\n", val);
+			return -EINVAL;
+		}
+
+		sys_reg->rate_ulp = val / 16;
+	}
+
+	if (!device_property_read_u32(&client->dev, "azoteq,timeout-pwr-ms",
+				      &val)) {
+		if (val > IQS626_TIMEOUT_PWR_MS_MAX) {
+			dev_err(&client->dev, "Invalid timeout: %u\n", val);
+			return -EINVAL;
+		}
+
+		sys_reg->timeout_pwr = val / 512;
+	}
+
+	if (!device_property_read_u32(&client->dev, "azoteq,timeout-lta-ms",
+				      &val)) {
+		if (val > IQS626_TIMEOUT_LTA_MS_MAX) {
+			dev_err(&client->dev, "Invalid timeout: %u\n", val);
+			return -EINVAL;
+		}
+
+		sys_reg->timeout_lta = val / 512;
+	}
+
+	sys_reg->event_mask = ~((u8)IQS626_EVENT_MASK_SYS);
+	sys_reg->redo_ati = 0;
+
+	sys_reg->reseed = 0;
+	sys_reg->active = 0;
+
+	for (i = 0; i < ARRAY_SIZE(iqs626_channels); i++) {
+		ch_node = device_get_named_child_node(&client->dev,
+						      iqs626_channels[i].name);
+		if (!ch_node)
+			continue;
+
+		error = iqs626_parse_channel(iqs626, ch_node, i);
+		if (error)
+			return error;
+
+		error = iqs626_parse_ati_target(iqs626, ch_node, i);
+		if (error)
+			return error;
+
+		error = iqs626_parse_events(iqs626, ch_node, i);
+		if (error)
+			return error;
+
+		if (!fwnode_property_present(ch_node, "azoteq,ati-exclude"))
+			sys_reg->redo_ati |= iqs626_channels[i].active;
+
+		if (!fwnode_property_present(ch_node, "azoteq,reseed-disable"))
+			sys_reg->reseed |= iqs626_channels[i].active;
+
+		sys_reg->active |= iqs626_channels[i].active;
+	}
+
+	general |= IQS626_SYS_SETTINGS_EVENT_MODE;
+
+	/*
+	 * Enable streaming during normal-power mode if the trackpad is used to
+	 * report raw coordinates instead of gestures. In that case, the device
+	 * returns to event mode during low-power mode.
+	 */
+	if (sys_reg->active & iqs626_channels[IQS626_CH_TP_2].active &&
+	    sys_reg->event_mask & IQS626_EVENT_MASK_GESTURE)
+		general |= IQS626_SYS_SETTINGS_EVENT_MODE_LP;
+
+	general |= IQS626_SYS_SETTINGS_REDO_ATI;
+	general |= IQS626_SYS_SETTINGS_ACK_RESET;
+
+	sys_reg->general = cpu_to_be16(general);
+
+	error = regmap_raw_write(iqs626->regmap, IQS626_SYS_SETTINGS,
+				 &iqs626->sys_reg, sizeof(iqs626->sys_reg));
+	if (error)
+		return error;
+
+	iqs626_irq_wait();
+
+	return 0;
+}
+
+static int iqs626_input_init(struct iqs626_private *iqs626)
+{
+	struct iqs626_sys_reg *sys_reg = &iqs626->sys_reg;
+	struct i2c_client *client = iqs626->client;
+	int error, i, j;
+
+	iqs626->keypad = devm_input_allocate_device(&client->dev);
+	if (!iqs626->keypad)
+		return -ENOMEM;
+
+	iqs626->keypad->keycodemax = ARRAY_SIZE(iqs626->kp_code);
+	iqs626->keypad->keycode = iqs626->kp_code;
+	iqs626->keypad->keycodesize = sizeof(**iqs626->kp_code);
+
+	iqs626->keypad->name = "iqs626a_keypad";
+	iqs626->keypad->id.bustype = BUS_I2C;
+
+	for (i = 0; i < ARRAY_SIZE(iqs626_channels); i++) {
+		if (!(sys_reg->active & iqs626_channels[i].active))
+			continue;
+
+		for (j = 0; j < ARRAY_SIZE(iqs626_events); j++) {
+			if (!iqs626->kp_type[i][j])
+				continue;
+
+			input_set_capability(iqs626->keypad,
+					     iqs626->kp_type[i][j],
+					     iqs626->kp_code[i][j]);
+		}
+	}
+
+	if (!(sys_reg->active & iqs626_channels[IQS626_CH_TP_2].active))
+		return 0;
+
+	iqs626->trackpad = devm_input_allocate_device(&client->dev);
+	if (!iqs626->trackpad)
+		return -ENOMEM;
+
+	iqs626->trackpad->keycodemax = ARRAY_SIZE(iqs626->tp_code);
+	iqs626->trackpad->keycode = iqs626->tp_code;
+	iqs626->trackpad->keycodesize = sizeof(*iqs626->tp_code);
+
+	iqs626->trackpad->name = "iqs626a_trackpad";
+	iqs626->trackpad->id.bustype = BUS_I2C;
+
+	/*
+	 * Present the trackpad as a traditional pointing device if no gestures
+	 * have been mapped to a keycode.
+	 */
+	if (sys_reg->event_mask & IQS626_EVENT_MASK_GESTURE) {
+		u8 tp_mask = iqs626_channels[IQS626_CH_TP_3].active;
+
+		input_set_capability(iqs626->trackpad, EV_KEY, BTN_TOUCH);
+		input_set_abs_params(iqs626->trackpad, ABS_Y, 0, 255, 0, 0);
+
+		if ((sys_reg->active & tp_mask) == tp_mask)
+			input_set_abs_params(iqs626->trackpad,
+					     ABS_X, 0, 255, 0, 0);
+		else
+			input_set_abs_params(iqs626->trackpad,
+					     ABS_X, 0, 128, 0, 0);
+
+		touchscreen_parse_properties(iqs626->trackpad, false,
+					     &iqs626->prop);
+	} else {
+		for (i = 0; i < IQS626_NUM_GESTURES; i++)
+			if (iqs626->tp_code[i] != KEY_RESERVED)
+				input_set_capability(iqs626->trackpad, EV_KEY,
+						     iqs626->tp_code[i]);
+	}
+
+	error = input_register_device(iqs626->trackpad);
+	if (error)
+		dev_err(&client->dev, "Failed to register trackpad: %d\n",
+			error);
+
+	return error;
+}
+
+static int iqs626_report(struct iqs626_private *iqs626)
+{
+	struct iqs626_sys_reg *sys_reg = &iqs626->sys_reg;
+	struct i2c_client *client = iqs626->client;
+	struct iqs626_flags flags;
+	__le16 hall_output;
+	int error, i, j;
+	u8 state;
+	u8 *dir_mask = &flags.states[IQS626_ST_OFFS_DIR];
+
+	error = regmap_raw_read(iqs626->regmap, IQS626_SYS_FLAGS, &flags,
+				sizeof(flags));
+	if (error) {
+		dev_err(&client->dev, "Failed to read device status: %d\n",
+			error);
+		return error;
+	}
+
+	/*
+	 * The device resets itself if its own watchdog bites, which can happen
+	 * in the event of an I2C communication error. In this case, the device
+	 * asserts a SHOW_RESET interrupt and all registers must be restored.
+	 */
+	if (be16_to_cpu(flags.system) & IQS626_SYS_FLAGS_SHOW_RESET) {
+		dev_err(&client->dev, "Unexpected device reset\n");
+
+		error = regmap_raw_write(iqs626->regmap, IQS626_SYS_SETTINGS,
+					 sys_reg, sizeof(*sys_reg));
+		if (error)
+			dev_err(&client->dev,
+				"Failed to re-initialize device: %d\n", error);
+
+		return error;
+	}
+
+	if (be16_to_cpu(flags.system) & IQS626_SYS_FLAGS_IN_ATI)
+		return 0;
+
+	/*
+	 * Unlike the ULP or generic channels, the Hall channel does not have a
+	 * direction flag. Instead, the direction (i.e. magnet polarity) can be
+	 * derived based on the sign of the 2's complement differential output.
+	 */
+	if (sys_reg->active & iqs626_channels[IQS626_CH_HALL].active) {
+		error = regmap_raw_read(iqs626->regmap, IQS626_HALL_OUTPUT,
+					&hall_output, sizeof(hall_output));
+		if (error) {
+			dev_err(&client->dev,
+				"Failed to read Hall output: %d\n", error);
+			return error;
+		}
+
+		*dir_mask &= ~iqs626_channels[IQS626_CH_HALL].active;
+		if (le16_to_cpu(hall_output) < 0x8000)
+			*dir_mask |= iqs626_channels[IQS626_CH_HALL].active;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(iqs626_channels); i++) {
+		if (!(sys_reg->active & iqs626_channels[i].active))
+			continue;
+
+		for (j = 0; j < ARRAY_SIZE(iqs626_events); j++) {
+			if (!iqs626->kp_type[i][j])
+				continue;
+
+			state = flags.states[iqs626_events[j].st_offs];
+			state &= iqs626_events[j].dir_up ? *dir_mask
+							 : ~(*dir_mask);
+			state &= iqs626_channels[i].active;
+
+			input_event(iqs626->keypad, iqs626->kp_type[i][j],
+				    iqs626->kp_code[i][j], !!state);
+		}
+	}
+
+	input_sync(iqs626->keypad);
+
+	/*
+	 * The following completion signals that ATI has finished, any initial
+	 * switch states have been reported and the keypad can be registered.
+	 */
+	complete_all(&iqs626->ati_done);
+
+	if (!(sys_reg->active & iqs626_channels[IQS626_CH_TP_2].active))
+		return 0;
+
+	if (sys_reg->event_mask & IQS626_EVENT_MASK_GESTURE) {
+		state = flags.states[IQS626_ST_OFFS_TOUCH];
+		state &= iqs626_channels[IQS626_CH_TP_2].active;
+
+		input_report_key(iqs626->trackpad, BTN_TOUCH, state);
+
+		if (state)
+			touchscreen_report_pos(iqs626->trackpad, &iqs626->prop,
+					       flags.trackpad_x,
+					       flags.trackpad_y, false);
+	} else {
+		for (i = 0; i < IQS626_NUM_GESTURES; i++)
+			input_report_key(iqs626->trackpad, iqs626->tp_code[i],
+					 flags.gesture & BIT(i));
+
+		if (flags.gesture & GENMASK(IQS626_GESTURE_TAP, 0)) {
+			input_sync(iqs626->trackpad);
+
+			/*
+			 * Momentary gestures are followed by a complementary
+			 * release cycle so as to emulate a full keystroke.
+			 */
+			for (i = 0; i < IQS626_GESTURE_HOLD; i++)
+				input_report_key(iqs626->trackpad,
+						 iqs626->tp_code[i], 0);
+		}
+	}
+
+	input_sync(iqs626->trackpad);
+
+	return 0;
+}
+
+static irqreturn_t iqs626_irq(int irq, void *context)
+{
+	struct iqs626_private *iqs626 = context;
+
+	if (iqs626_report(iqs626))
+		return IRQ_NONE;
+
+	/*
+	 * The device does not deassert its interrupt (RDY) pin until shortly
+	 * after receiving an I2C stop condition; the following delay ensures
+	 * the interrupt handler does not return before this time.
+	 */
+	iqs626_irq_wait();
+
+	return IRQ_HANDLED;
+}
+
+static const struct regmap_config iqs626_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 16,
+	.max_register = IQS626_MAX_REG,
+};
+
+static int iqs626_probe(struct i2c_client *client)
+{
+	struct iqs626_ver_info ver_info;
+	struct iqs626_private *iqs626;
+	int error;
+
+	iqs626 = devm_kzalloc(&client->dev, sizeof(*iqs626), GFP_KERNEL);
+	if (!iqs626)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, iqs626);
+	iqs626->client = client;
+
+	iqs626->regmap = devm_regmap_init_i2c(client, &iqs626_regmap_config);
+	if (IS_ERR(iqs626->regmap)) {
+		error = PTR_ERR(iqs626->regmap);
+		dev_err(&client->dev, "Failed to initialize register map: %d\n",
+			error);
+		return error;
+	}
+
+	init_completion(&iqs626->ati_done);
+
+	error = regmap_raw_read(iqs626->regmap, IQS626_VER_INFO, &ver_info,
+				sizeof(ver_info));
+	if (error)
+		return error;
+
+	if (ver_info.prod_num != IQS626_VER_INFO_PROD_NUM) {
+		dev_err(&client->dev, "Unrecognized product number: 0x%02X\n",
+			ver_info.prod_num);
+		return -EINVAL;
+	}
+
+	error = iqs626_parse_prop(iqs626);
+	if (error)
+		return error;
+
+	error = iqs626_input_init(iqs626);
+	if (error)
+		return error;
+
+	error = devm_request_threaded_irq(&client->dev, client->irq,
+					  NULL, iqs626_irq, IRQF_ONESHOT,
+					  client->name, iqs626);
+	if (error) {
+		dev_err(&client->dev, "Failed to request IRQ: %d\n", error);
+		return error;
+	}
+
+	if (!wait_for_completion_timeout(&iqs626->ati_done,
+					 msecs_to_jiffies(2000))) {
+		dev_err(&client->dev, "Failed to complete ATI\n");
+		return -ETIMEDOUT;
+	}
+
+	/*
+	 * The keypad may include one or more switches and is not registered
+	 * until ATI is complete and the initial switch states are read.
+	 */
+	error = input_register_device(iqs626->keypad);
+	if (error)
+		dev_err(&client->dev, "Failed to register keypad: %d\n", error);
+
+	return error;
+}
+
+static int __maybe_unused iqs626_suspend(struct device *dev)
+{
+	struct iqs626_private *iqs626 = dev_get_drvdata(dev);
+	struct i2c_client *client = iqs626->client;
+	unsigned int val;
+	int error;
+
+	if (!iqs626->suspend_mode)
+		return 0;
+
+	disable_irq(client->irq);
+
+	/*
+	 * Automatic power mode switching must be disabled before the device is
+	 * forced into any particular power mode. In this case, the device will
+	 * transition into normal-power mode.
+	 */
+	error = regmap_update_bits(iqs626->regmap, IQS626_SYS_SETTINGS,
+				   IQS626_SYS_SETTINGS_DIS_AUTO, ~0);
+	if (error)
+		goto err_irq;
+
+	/*
+	 * The following check ensures the device has completed its transition
+	 * into normal-power mode before a manual mode switch is performed.
+	 */
+	error = regmap_read_poll_timeout(iqs626->regmap, IQS626_SYS_FLAGS, val,
+					!(val & IQS626_SYS_FLAGS_PWR_MODE_MASK),
+					 IQS626_PWR_MODE_POLL_SLEEP_US,
+					 IQS626_PWR_MODE_POLL_TIMEOUT_US);
+	if (error)
+		goto err_irq;
+
+	error = regmap_update_bits(iqs626->regmap, IQS626_SYS_SETTINGS,
+				   IQS626_SYS_SETTINGS_PWR_MODE_MASK,
+				   iqs626->suspend_mode <<
+				   IQS626_SYS_SETTINGS_PWR_MODE_SHIFT);
+	if (error)
+		goto err_irq;
+
+	/*
+	 * This last check ensures the device has completed its transition into
+	 * the desired power mode to prevent any spurious interrupts from being
+	 * triggered after iqs626_suspend has already returned.
+	 */
+	error = regmap_read_poll_timeout(iqs626->regmap, IQS626_SYS_FLAGS, val,
+					 (val & IQS626_SYS_FLAGS_PWR_MODE_MASK)
+					 == (iqs626->suspend_mode <<
+					     IQS626_SYS_FLAGS_PWR_MODE_SHIFT),
+					 IQS626_PWR_MODE_POLL_SLEEP_US,
+					 IQS626_PWR_MODE_POLL_TIMEOUT_US);
+
+err_irq:
+	iqs626_irq_wait();
+	enable_irq(client->irq);
+
+	return error;
+}
+
+static int __maybe_unused iqs626_resume(struct device *dev)
+{
+	struct iqs626_private *iqs626 = dev_get_drvdata(dev);
+	struct i2c_client *client = iqs626->client;
+	unsigned int val;
+	int error;
+
+	if (!iqs626->suspend_mode)
+		return 0;
+
+	disable_irq(client->irq);
+
+	error = regmap_update_bits(iqs626->regmap, IQS626_SYS_SETTINGS,
+				   IQS626_SYS_SETTINGS_PWR_MODE_MASK, 0);
+	if (error)
+		goto err_irq;
+
+	/*
+	 * This check ensures the device has returned to normal-power mode
+	 * before automatic power mode switching is re-enabled.
+	 */
+	error = regmap_read_poll_timeout(iqs626->regmap, IQS626_SYS_FLAGS, val,
+					!(val & IQS626_SYS_FLAGS_PWR_MODE_MASK),
+					 IQS626_PWR_MODE_POLL_SLEEP_US,
+					 IQS626_PWR_MODE_POLL_TIMEOUT_US);
+	if (error)
+		goto err_irq;
+
+	error = regmap_update_bits(iqs626->regmap, IQS626_SYS_SETTINGS,
+				   IQS626_SYS_SETTINGS_DIS_AUTO, 0);
+	if (error)
+		goto err_irq;
+
+	/*
+	 * This step reports any events that may have been "swallowed" as a
+	 * result of polling PWR_MODE (which automatically acknowledges any
+	 * pending interrupts).
+	 */
+	error = iqs626_report(iqs626);
+
+err_irq:
+	iqs626_irq_wait();
+	enable_irq(client->irq);
+
+	return error;
+}
+
+static SIMPLE_DEV_PM_OPS(iqs626_pm, iqs626_suspend, iqs626_resume);
+
+static const struct of_device_id iqs626_of_match[] = {
+	{ .compatible = "azoteq,iqs626a" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, iqs626_of_match);
+
+static struct i2c_driver iqs626_i2c_driver = {
+	.driver = {
+		.name = "iqs626a",
+		.of_match_table = iqs626_of_match,
+		.pm = &iqs626_pm,
+	},
+	.probe_new = iqs626_probe,
+};
+module_i2c_driver(iqs626_i2c_driver);
+
+MODULE_AUTHOR("Jeff LaBundy <jeff@labundy.com>");
+MODULE_DESCRIPTION("Azoteq IQS626A Capacitive Touch Controller");
+MODULE_LICENSE("GPL");