arm64: dts: imx8mm: Enable CPLD_Dn pull down resistor on MX8Menlo

Enable CPLD_Dn pull down resistor instead of pull up to avoid
intefering with CPLD power off functionality.

Fixes: 510c527b ("arm64: dts: imx8mm: Add i.MX8M Mini Toradex Verdin based Menlo board")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts

@@ -250,21 +250,21 @@ MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3			0x1c4
 		/* SODIMM 96 */
 		MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4			0x1c4
 		/* CPLD_D[7] */
-		MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5			0x1c4
+		MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5			0x184
 		/* CPLD_D[6] */
-		MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0			0x1c4
+		MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0			0x184
 		/* CPLD_D[5] */
-		MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11			0x1c4
+		MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11			0x184
 		/* CPLD_D[4] */
-		MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12			0x1c4
+		MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12			0x184
 		/* CPLD_D[3] */
-		MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13			0x1c4
+		MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13			0x184
 		/* CPLD_D[2] */
-		MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14			0x1c4
+		MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14			0x184
 		/* CPLD_D[1] */
-		MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15			0x1c4
+		MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15			0x184
 		/* CPLD_D[0] */
-		MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16			0x1c4
+		MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16			0x184
 		/* KBD_intK */
 		MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27			0x1c4
 		/* DISP_reset */