Commit f2b543a1 authored by Macpaul Lin's avatar Macpaul Lin Committed by Matthias Brugger

arm64: dts: mediatek: add device-tree for Genio 1200 EVK board

Add basic device-tree for the Genio 1200-EVK board. This board
is made by MediaTek and has a MT8395 SoC (MT8195 family),
associated with the MT6359 and MT6360 PMICs, and
the MT7921 connectivity chip.

The IOs available on that board are:
* 1 USB Type-C connector with DP aux mode support
* 2 USB Type-A connector with a USB hub
* 1 micro-USB port for gadget or OTG support
* 1 full size HDMI RX and 1 full size HDMI TX connector
* 1 micro SD slot
* 40 pins header
* SPI interface header
* 1 M.2 slot
* 1 audio jack
* 1 micro-USB port for serial debug
* 2 connectors for DSI displays, 1 of the DSI panel is installed
* 3 connectors for CSI cameras
* 1 connector for a eDP panel
* 1 MMC storage
* 1 Touch Panel (installed DSI display)
* 1 M.2 slot for 5G dongle

This commit adds basic support in order to be able to boot.
Signed-off-by: default avatarBen Lok <ben.lok@mediatek.com>
Signed-off-by: default avatarMacpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: default avatarAngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: default avatarAngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230914055145.16801-2-macpaul.lin@mediatek.comSigned-off-by: default avatarMatthias Brugger <matthias.bgg@gmail.com>
parent 4a94bdc5
...@@ -53,4 +53,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r3.dtb ...@@ -53,4 +53,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r3.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-demo.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-demo.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-evk.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-evk.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-genio-1200-evk.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright (C) 2023 MediaTek Inc.
* Author: Ben Lok <ben.lok@mediatek.com>
* Macpaul Lin <macpaul.lin@mediatek.com>
*/
/dts-v1/;
#include "mt8195.dtsi"
#include "mt6359.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/mt8195-pinfunc.h>
#include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
#include <dt-bindings/spmi/spmi.h>
#include <dt-bindings/usb/pd.h>
/ {
model = "MediaTek Genio 1200 EVK-P1V2-EMMC";
compatible = "mediatek,mt8395-evk", "mediatek,mt8395",
"mediatek,mt8195";
aliases {
serial0 = &uart0;
ethernet0 = &eth;
};
chosen {
stdout-path = "serial0:921600n8";
};
firmware {
optee {
compatible = "linaro,optee-tz";
method = "smc";
};
};
memory@40000000 {
device_type = "memory";
reg = <0 0x40000000 0x2 0x00000000>;
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
/*
* 12 MiB reserved for OP-TEE (BL32)
* +-----------------------+ 0x43e0_0000
* | SHMEM 2MiB |
* +-----------------------+ 0x43c0_0000
* | | TA_RAM 8MiB |
* + TZDRAM +--------------+ 0x4340_0000
* | | TEE_RAM 2MiB |
* +-----------------------+ 0x4320_0000
*/
optee_reserved: optee@43200000 {
no-map;
reg = <0 0x43200000 0 0x00c00000>;
};
scp_mem: memory@50000000 {
compatible = "shared-dma-pool";
reg = <0 0x50000000 0 0x2900000>;
no-map;
};
vpu_mem: memory@53000000 {
compatible = "shared-dma-pool";
reg = <0 0x53000000 0 0x1400000>; /* 20 MB */
};
/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
bl31_secmon_mem: memory@54600000 {
no-map;
reg = <0 0x54600000 0x0 0x200000>;
};
snd_dma_mem: memory@60000000 {
compatible = "shared-dma-pool";
reg = <0 0x60000000 0 0x1100000>;
no-map;
};
apu_mem: memory@62000000 {
compatible = "shared-dma-pool";
reg = <0 0x62000000 0 0x1400000>; /* 20 MB */
};
};
backlight_lcd0: backlight-lcd0 {
compatible = "pwm-backlight";
pwms = <&disp_pwm0 0 500000>;
enable-gpios = <&pio 47 GPIO_ACTIVE_HIGH>;
brightness-levels = <0 1023>;
num-interpolated-steps = <1023>;
default-brightness-level = <576>;
};
backlight_lcd1: backlight-lcd1 {
compatible = "pwm-backlight";
pwms = <&disp_pwm1 0 500000>;
enable-gpios = <&pio 46 GPIO_ACTIVE_HIGH>;
brightness-levels = <0 1023>;
num-interpolated-steps = <1023>;
default-brightness-level = <576>;
};
can_clk: can-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <20000000>;
clock-output-names = "can-clk";
};
edp_panel_fixed_3v3: regulator-0 {
compatible = "regulator-fixed";
regulator-name = "edp_panel_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
gpio = <&pio 6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&edp_panel_3v3_en_pins>;
};
edp_panel_fixed_12v: regulator-1 {
compatible = "regulator-fixed";
regulator-name = "edp_backlight_12v";
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
enable-active-high;
gpio = <&pio 96 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&edp_panel_12v_en_pins>;
};
keys: gpio-keys {
compatible = "gpio-keys";
button-volume-up {
wakeup-source;
debounce-interval = <100>;
gpios = <&pio 106 GPIO_ACTIVE_LOW>;
label = "volume_up";
linux,code = <KEY_VOLUMEUP>;
};
};
wifi_fixed_3v3: regulator-2 {
compatible = "regulator-fixed";
regulator-name = "wifi_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&pio 135 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
};
};
&disp_pwm0 {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_default_pins>;
status = "okay";
};
&dmic_codec {
wakeup-delay-ms = <200>;
};
&eth {
phy-mode ="rgmii-rxid";
phy-handle = <&eth_phy0>;
snps,reset-gpio = <&pio 93 GPIO_ACTIVE_HIGH>;
snps,reset-delays-us = <0 10000 10000>;
mediatek,tx-delay-ps = <2030>;
mediatek,mac-wol;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&eth_default_pins>;
pinctrl-1 = <&eth_sleep_pins>;
status = "okay";
mdio {
compatible = "snps,dwmac-mdio";
#address-cells = <1>;
#size-cells = <0>;
eth_phy0: eth-phy0@1 {
compatible = "ethernet-phy-id001c.c916";
reg = <0x1>;
};
};
};
&i2c0 {
clock-frequency = <400000>;
pinctrl-0 = <&i2c0_pins>;
pinctrl-names = "default";
status = "okay";
};
&i2c1 {
clock-frequency = <400000>;
pinctrl-0 = <&i2c1_pins>;
pinctrl-names = "default";
status = "okay";
touchscreen@5d {
compatible = "goodix,gt9271";
reg = <0x5d>;
interrupt-parent = <&pio>;
interrupts = <132 IRQ_TYPE_EDGE_RISING>;
irq-gpios = <&pio 132 GPIO_ACTIVE_HIGH>;
reset-gpios = <&pio 133 GPIO_ACTIVE_HIGH>;
AVDD28-supply = <&mt6360_ldo1>;
pinctrl-names = "default";
pinctrl-0 = <&touch_pins>;
};
};
&i2c2 {
clock-frequency = <400000>;
pinctrl-0 = <&i2c2_pins>;
pinctrl-names = "default";
status = "okay";
};
&i2c6 {
clock-frequency = <400000>;
pinctrl-0 = <&i2c6_pins>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
mt6360: pmic@34 {
compatible = "mediatek,mt6360";
reg = <0x34>;
interrupts = <128 IRQ_TYPE_EDGE_FALLING>;
interrupt-names = "IRQB";
interrupt-controller;
#interrupt-cells = <1>;
pinctrl-0 = <&mt6360_pins>;
charger {
compatible = "mediatek,mt6360-chg";
richtek,vinovp-microvolt = <14500000>;
otg_vbus_regulator: usb-otg-vbus-regulator {
regulator-name = "usb-otg-vbus";
regulator-min-microvolt = <4425000>;
regulator-max-microvolt = <5825000>;
};
};
regulator {
compatible = "mediatek,mt6360-regulator";
LDO_VIN3-supply = <&mt6360_buck2>;
mt6360_buck1: buck1 {
regulator-name = "emi_vdd2";
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <1300000>;
regulator-allowed-modes = <MT6360_OPMODE_NORMAL
MT6360_OPMODE_LP
MT6360_OPMODE_ULP>;
regulator-always-on;
};
mt6360_buck2: buck2 {
regulator-name = "emi_vddq";
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <1300000>;
regulator-allowed-modes = <MT6360_OPMODE_NORMAL
MT6360_OPMODE_LP
MT6360_OPMODE_ULP>;
regulator-always-on;
};
mt6360_ldo1: ldo1 {
regulator-name = "tp1_p3v0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-allowed-modes = <MT6360_OPMODE_NORMAL
MT6360_OPMODE_LP>;
regulator-always-on;
};
mt6360_ldo2: ldo2 {
regulator-name = "panel1_p1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-allowed-modes = <MT6360_OPMODE_NORMAL
MT6360_OPMODE_LP>;
};
mt6360_ldo3: ldo3 {
regulator-name = "vmc_pmu";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3600000>;
regulator-allowed-modes = <MT6360_OPMODE_NORMAL
MT6360_OPMODE_LP>;
};
mt6360_ldo5: ldo5 {
regulator-name = "vmch_pmu";
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <3600000>;
regulator-allowed-modes = <MT6360_OPMODE_NORMAL
MT6360_OPMODE_LP>;
};
/* This is a measure point, which name is mt6360_ldo1 on schematic */
mt6360_ldo6: ldo6 {
regulator-name = "mt6360_ldo1";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <2100000>;
regulator-allowed-modes = <MT6360_OPMODE_NORMAL
MT6360_OPMODE_LP>;
};
mt6360_ldo7: ldo7 {
regulator-name = "emi_vmddr_en";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <2100000>;
regulator-allowed-modes = <MT6360_OPMODE_NORMAL
MT6360_OPMODE_LP>;
regulator-always-on;
};
};
};
};
&mfg0 {
domain-supply = <&mt6315_7_vbuck1>;
};
&mmc0 {
status = "okay";
pinctrl-names = "default", "state_uhs";
pinctrl-0 = <&mmc0_default_pins>;
pinctrl-1 = <&mmc0_uhs_pins>;
bus-width = <8>;
max-frequency = <200000000>;
cap-mmc-highspeed;
mmc-hs200-1_8v;
mmc-hs400-1_8v;
cap-mmc-hw-reset;
no-sdio;
no-sd;
hs400-ds-delay = <0x14c11>;
vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
vqmmc-supply = <&mt6359_vufs_ldo_reg>;
non-removable;
};
&mmc1 {
pinctrl-names = "default", "state_uhs";
pinctrl-0 = <&mmc1_default_pins>;
pinctrl-1 = <&mmc1_uhs_pins>;
bus-width = <4>;
max-frequency = <200000000>;
cap-sd-highspeed;
sd-uhs-sdr50;
sd-uhs-sdr104;
no-mmc;
no-sdio;
vmmc-supply = <&mt6360_ldo5>;
vqmmc-supply = <&mt6360_ldo3>;
status = "okay";
non-removable;
};
&mt6359_vaud18_ldo_reg {
regulator-always-on;
};
&mt6359_vbbck_ldo_reg {
regulator-always-on;
};
/* For USB Hub */
&mt6359_vcamio_ldo_reg {
regulator-always-on;
};
&mt6359_vcn33_2_bt_ldo_reg {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
&mt6359_vcore_buck_reg {
regulator-always-on;
};
&mt6359_vgpu11_buck_reg {
regulator-always-on;
};
&mt6359_vpu_buck_reg {
regulator-always-on;
};
&mt6359_vrf12_ldo_reg {
regulator-always-on;
};
&mt6359codec {
mediatek,mic-type-0 = <1>; /* ACC */
mediatek,mic-type-1 = <3>; /* DCC */
mediatek,mic-type-2 = <1>; /* ACC */
};
&pcie0 {
pinctrl-names = "default", "idle";
pinctrl-0 = <&pcie0_default_pins>;
pinctrl-1 = <&pcie0_idle_pins>;
status = "okay";
};
&pcie1 {
pinctrl-names = "default";
pinctrl-0 = <&pcie1_default_pins>;
status = "disabled";
};
&pciephy {
status = "okay";
};
&pio {
audio_default_pins: audio-default-pins {
pins-cmd-dat {
pinmux = <PINMUX_GPIO61__FUNC_DMIC1_CLK>,
<PINMUX_GPIO62__FUNC_DMIC1_DAT>,
<PINMUX_GPIO65__FUNC_PCM_DO>,
<PINMUX_GPIO66__FUNC_PCM_CLK>,
<PINMUX_GPIO67__FUNC_PCM_DI>,
<PINMUX_GPIO68__FUNC_PCM_SYNC>,
<PINMUX_GPIO69__FUNC_AUD_CLK_MOSI>,
<PINMUX_GPIO70__FUNC_AUD_SYNC_MOSI>,
<PINMUX_GPIO71__FUNC_AUD_DAT_MOSI0>,
<PINMUX_GPIO72__FUNC_AUD_DAT_MOSI1>,
<PINMUX_GPIO73__FUNC_AUD_DAT_MISO0>,
<PINMUX_GPIO74__FUNC_AUD_DAT_MISO1>,
<PINMUX_GPIO75__FUNC_AUD_DAT_MISO2>;
};
};
disp_pwm1_default_pins: disp-pwm1-default-pins {
pins1 {
pinmux = <PINMUX_GPIO104__FUNC_DISP_PWM1>;
};
};
edp_panel_12v_en_pins: edp-panel-12v-en-pins {
pins1 {
pinmux = <PINMUX_GPIO96__FUNC_GPIO96>;
output-high;
};
};
edp_panel_3v3_en_pins: edp-panel-3v3-en-pins {
pins1 {
pinmux = <PINMUX_GPIO6__FUNC_GPIO6>;
output-high;
};
};
eth_default_pins: eth-default-pins {
pins-cc {
pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>,
<PINMUX_GPIO86__FUNC_GBE_RXC>,
<PINMUX_GPIO87__FUNC_GBE_RXDV>,
<PINMUX_GPIO88__FUNC_GBE_TXEN>;
drive-strength = <MTK_DRIVE_8mA>;
};
pins-mdio {
pinmux = <PINMUX_GPIO89__FUNC_GBE_MDC>,
<PINMUX_GPIO90__FUNC_GBE_MDIO>;
input-enable;
};
pins-power {
pinmux = <PINMUX_GPIO91__FUNC_GPIO91>,
<PINMUX_GPIO92__FUNC_GPIO92>;
output-high;
};
pins-rxd {
pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>,
<PINMUX_GPIO82__FUNC_GBE_RXD2>,
<PINMUX_GPIO83__FUNC_GBE_RXD1>,
<PINMUX_GPIO84__FUNC_GBE_RXD0>;
};
pins-txd {
pinmux = <PINMUX_GPIO77__FUNC_GBE_TXD3>,
<PINMUX_GPIO78__FUNC_GBE_TXD2>,
<PINMUX_GPIO79__FUNC_GBE_TXD1>,
<PINMUX_GPIO80__FUNC_GBE_TXD0>;
drive-strength = <MTK_DRIVE_8mA>;
};
};
eth_sleep_pins: eth-sleep-pins {
pins-cc {
pinmux = <PINMUX_GPIO85__FUNC_GPIO85>,
<PINMUX_GPIO86__FUNC_GPIO86>,
<PINMUX_GPIO87__FUNC_GPIO87>,
<PINMUX_GPIO88__FUNC_GPIO88>;
};
pins-mdio {
pinmux = <PINMUX_GPIO89__FUNC_GPIO89>,
<PINMUX_GPIO90__FUNC_GPIO90>;
input-disable;
bias-disable;
};
pins-rxd {
pinmux = <PINMUX_GPIO81__FUNC_GPIO81>,
<PINMUX_GPIO82__FUNC_GPIO82>,
<PINMUX_GPIO83__FUNC_GPIO83>,
<PINMUX_GPIO84__FUNC_GPIO84>;
};
pins-txd {
pinmux = <PINMUX_GPIO77__FUNC_GPIO77>,
<PINMUX_GPIO78__FUNC_GPIO78>,
<PINMUX_GPIO79__FUNC_GPIO79>,
<PINMUX_GPIO80__FUNC_GPIO80>;
};
};
gpio_key_pins: gpio-keys-pins {
pins {
pinmux = <PINMUX_GPIO106__FUNC_GPIO106>;
bias-pull-up;
input-enable;
};
};
i2c0_pins: i2c0-pins {
pins {
pinmux = <PINMUX_GPIO8__FUNC_SDA0>,
<PINMUX_GPIO9__FUNC_SCL0>;
bias-pull-up = <MTK_PULL_SET_RSEL_111>;
drive-strength-microamp = <1000>;
};
};
i2c1_pins: i2c1-pins {
pins {
pinmux = <PINMUX_GPIO10__FUNC_SDA1>,
<PINMUX_GPIO11__FUNC_SCL1>;
bias-pull-up = <MTK_PULL_SET_RSEL_111>;
drive-strength-microamp = <1000>;
};
};
i2c2_pins: i2c2-pins {
pins {
pinmux = <PINMUX_GPIO12__FUNC_SDA2>,
<PINMUX_GPIO13__FUNC_SCL2>;
bias-pull-up = <MTK_PULL_SET_RSEL_111>;
drive-strength = <MTK_DRIVE_6mA>;
};
};
i2c6_pins: i2c6-pins {
pins {
pinmux = <PINMUX_GPIO25__FUNC_SDA6>,
<PINMUX_GPIO26__FUNC_SCL6>;
bias-pull-up;
};
};
mmc0_default_pins: mmc0-default-pins {
pins-clk {
pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
drive-strength = <MTK_DRIVE_6mA>;
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
};
pins-cmd-dat {
pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
<PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
<PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
<PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
<PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
<PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
<PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
<PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
<PINMUX_GPIO121__FUNC_MSDC0_CMD>;
input-enable;
drive-strength = <MTK_DRIVE_6mA>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
pins-rst {
pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
drive-strength = <MTK_DRIVE_6mA>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
};
mmc0_uhs_pins: mmc0-uhs-pins {
pins-clk {
pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
drive-strength = <MTK_DRIVE_8mA>;
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
};
pins-cmd-dat {
pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
<PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
<PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
<PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
<PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
<PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
<PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
<PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
<PINMUX_GPIO121__FUNC_MSDC0_CMD>;
input-enable;
drive-strength = <MTK_DRIVE_8mA>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
pins-ds {
pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>;
drive-strength = <MTK_DRIVE_8mA>;
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
};
pins-rst {
pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
drive-strength = <MTK_DRIVE_8mA>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
};
mmc1_default_pins: mmc1-default-pins {
pins-clk {
pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
drive-strength = <MTK_DRIVE_8mA>;
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
};
pins-cmd-dat {
pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
<PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
<PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
<PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
<PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
input-enable;
drive-strength = <MTK_DRIVE_8mA>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
};
mmc1_uhs_pins: mmc1-uhs-pins {
pins-clk {
pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
drive-strength = <MTK_DRIVE_8mA>;
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
};
pins-cmd-dat {
pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
<PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
<PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
<PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
<PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
input-enable;
drive-strength = <MTK_DRIVE_8mA>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
};
mt6360_pins: mt6360-pins {
pins {
pinmux = <PINMUX_GPIO17__FUNC_GPIO17>,
<PINMUX_GPIO128__FUNC_GPIO128>;
input-enable;
bias-pull-up;
};
};
pcie0_default_pins: pcie0-default-pins {
pins {
pinmux = <PINMUX_GPIO19__FUNC_WAKEN>,
<PINMUX_GPIO20__FUNC_PERSTN>,
<PINMUX_GPIO21__FUNC_CLKREQN>;
bias-pull-up;
};
};
pcie0_idle_pins: pcie0-idle-pins {
pins {
pinmux = <PINMUX_GPIO20__FUNC_GPIO20>;
bias-disable;
output-low;
};
};
pcie1_default_pins: pcie1-default-pins {
pins {
pinmux = <PINMUX_GPIO22__FUNC_PERSTN_1>,
<PINMUX_GPIO23__FUNC_CLKREQN_1>,
<PINMUX_GPIO24__FUNC_WAKEN_1>;
bias-pull-up;
};
};
pwm0_default_pins: pwm0-default-pins {
pins-cmd-dat {
pinmux = <PINMUX_GPIO97__FUNC_DISP_PWM0>;
};
};
spi1_pins: spi1-pins {
pins {
pinmux = <PINMUX_GPIO136__FUNC_SPIM1_CSB>,
<PINMUX_GPIO137__FUNC_SPIM1_CLK>,
<PINMUX_GPIO138__FUNC_SPIM1_MO>,
<PINMUX_GPIO139__FUNC_SPIM1_MI>;
bias-disable;
};
};
spi2_pins: spi-pins {
pins {
pinmux = <PINMUX_GPIO140__FUNC_SPIM2_CSB>,
<PINMUX_GPIO141__FUNC_SPIM2_CLK>,
<PINMUX_GPIO142__FUNC_SPIM2_MO>,
<PINMUX_GPIO143__FUNC_SPIM2_MI>;
bias-disable;
};
};
touch_pins: touch-pins {
pins-irq {
pinmux = <PINMUX_GPIO132__FUNC_GPIO132>;
input-enable;
bias-disable;
};
pins-reset {
pinmux = <PINMUX_GPIO133__FUNC_GPIO133>;
output-high;
};
};
uart0_pins: uart0-pins {
pins {
pinmux = <PINMUX_GPIO98__FUNC_UTXD0>,
<PINMUX_GPIO99__FUNC_URXD0>;
};
};
uart1_pins: uart1-pins {
pins {
pinmux = <PINMUX_GPIO100__FUNC_URTS1>,
<PINMUX_GPIO101__FUNC_UCTS1>,
<PINMUX_GPIO102__FUNC_UTXD1>,
<PINMUX_GPIO103__FUNC_URXD1>;
};
};
};
&pmic {
interrupt-parent = <&pio>;
interrupts = <222 IRQ_TYPE_LEVEL_HIGH>;
};
&scp {
memory-region = <&scp_mem>;
status = "okay";
};
&spi1 {
pinctrl-0 = <&spi1_pins>;
pinctrl-names = "default";
mediatek,pad-select = <0>;
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
cs-gpios = <&pio 64 GPIO_ACTIVE_LOW>;
can0: can@0 {
compatible = "microchip,mcp2518fd";
reg = <0>;
clocks = <&can_clk>;
spi-max-frequency = <20000000>;
interrupts-extended = <&pio 16 IRQ_TYPE_LEVEL_LOW>;
vdd-supply = <&mt6359_vcn33_2_bt_ldo_reg>;
xceiver-supply = <&mt6359_vcn33_2_bt_ldo_reg>;
};
};
&spi2 {
pinctrl-0 = <&spi2_pins>;
pinctrl-names = "default";
mediatek,pad-select = <0>;
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
};
&spmi {
#address-cells = <2>;
#size-cells = <0>;
mt6315_6: pmic@6 {
compatible = "mediatek,mt6315-regulator";
reg = <0x6 SPMI_USID>;
regulators {
mt6315_6_vbuck1: vbuck1 {
regulator-compatible = "vbuck1";
regulator-name = "Vbcpu";
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <1193750>;
regulator-enable-ramp-delay = <256>;
regulator-allowed-modes = <0 1 2>;
regulator-always-on;
};
};
};
mt6315_7: pmic@7 {
compatible = "mediatek,mt6315-regulator";
reg = <0x7 SPMI_USID>;
regulators {
mt6315_7_vbuck1: vbuck1 {
regulator-compatible = "vbuck1";
regulator-name = "Vgpu";
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <1193750>;
regulator-enable-ramp-delay = <256>;
regulator-allowed-modes = <0 1 2>;
};
};
};
};
&u3phy0 {
status = "okay";
};
&u3phy1 {
status = "okay";
};
&u3phy2 {
status = "okay";
};
&u3phy3 {
status = "okay";
};
&uart0 {
pinctrl-0 = <&uart0_pins>;
pinctrl-names = "default";
status = "okay";
};
&uart1 {
pinctrl-0 = <&uart1_pins>;
pinctrl-names = "default";
status = "okay";
};
&ufsphy {
status = "disabled";
};
&xhci0 {
status = "okay";
};
&xhci1 {
vusb33-supply = <&mt6359_vusb_ldo_reg>;
status = "okay";
};
&xhci2 {
vusb33-supply = <&mt6359_vusb_ldo_reg>;
status = "okay";
};
&xhci3 {
vusb33-supply = <&mt6359_vusb_ldo_reg>;
status = "okay";
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment