Commit f2ed8beb authored by Al Viro's avatar Al Viro

Merge commit 'a7d2475a' into uaccess.powerpc

backmerge of sorting the arch/powerpc/Kconfig
parents 527b5bae a7d2475a
......@@ -80,93 +80,99 @@ config ARCH_HAS_DMA_SET_COHERENT_MASK
config PPC
bool
default y
select BUILDTIME_EXTABLE_SORT
#
# Please keep this list sorted alphabetically.
#
select ARCH_HAS_DEVMEM_IS_ALLOWED
select ARCH_HAS_DMA_SET_COHERENT_MASK
select ARCH_HAS_ELF_RANDOMIZE
select ARCH_HAS_GCOV_PROFILE_ALL
select ARCH_HAS_SCALED_CPUTIME if VIRT_CPU_ACCOUNTING_NATIVE
select ARCH_HAS_SG_CHAIN
select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
select ARCH_HAS_UBSAN_SANITIZE_ALL
select ARCH_HAVE_NMI_SAFE_CMPXCHG
select ARCH_MIGHT_HAVE_PC_PARPORT
select ARCH_MIGHT_HAVE_PC_SERIO
select ARCH_SUPPORTS_ATOMIC_RMW
select ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT
select ARCH_USE_BUILTIN_BSWAP
select ARCH_USE_CMPXCHG_LOCKREF if PPC64
select ARCH_WANT_IPC_PARSE_VERSION
select BINFMT_ELF
select ARCH_HAS_ELF_RANDOMIZE
select OF
select OF_EARLY_FLATTREE
select OF_RESERVED_MEM
select HAVE_FTRACE_MCOUNT_RECORD
select BUILDTIME_EXTABLE_SORT
select CLONE_BACKWARDS
select DCACHE_WORD_ACCESS if PPC64 && CPU_LITTLE_ENDIAN
select EDAC_ATOMIC_SCRUB
select EDAC_SUPPORT
select GENERIC_ATOMIC64 if PPC32
select GENERIC_CLOCKEVENTS
select GENERIC_CLOCKEVENTS_BROADCAST if SMP
select GENERIC_CMOS_UPDATE
select GENERIC_CPU_AUTOPROBE
select GENERIC_IRQ_SHOW
select GENERIC_IRQ_SHOW_LEVEL
select GENERIC_SMP_IDLE_THREAD
select GENERIC_STRNCPY_FROM_USER
select GENERIC_STRNLEN_USER
select GENERIC_TIME_VSYSCALL_OLD
select HAVE_ARCH_AUDITSYSCALL
select HAVE_ARCH_HARDENED_USERCOPY
select HAVE_ARCH_JUMP_LABEL
select HAVE_ARCH_KGDB
select HAVE_ARCH_SECCOMP_FILTER
select HAVE_ARCH_TRACEHOOK
select HAVE_CBPF_JIT if !PPC64
select HAVE_CONTEXT_TRACKING if PPC64
select HAVE_DEBUG_KMEMLEAK
select HAVE_DEBUG_STACKOVERFLOW
select HAVE_DMA_API_DEBUG
select HAVE_DYNAMIC_FTRACE
select HAVE_DYNAMIC_FTRACE_WITH_REGS if MPROFILE_KERNEL
select HAVE_FUNCTION_TRACER
select HAVE_EBPF_JIT if PPC64
select HAVE_EFFICIENT_UNALIGNED_ACCESS if !(CPU_LITTLE_ENDIAN && POWER7_CPU)
select HAVE_FTRACE_MCOUNT_RECORD
select HAVE_FUNCTION_GRAPH_TRACER
select HAVE_FUNCTION_TRACER
select HAVE_GCC_PLUGINS
select SYSCTL_EXCEPTION_TRACE
select VIRT_TO_BUS if !PPC64
select HAVE_GENERIC_RCU_GUP
select HAVE_HW_BREAKPOINT if PERF_EVENTS && (PPC_BOOK3S || PPC_8xx)
select HAVE_IDE
select HAVE_IOREMAP_PROT
select HAVE_EFFICIENT_UNALIGNED_ACCESS if !(CPU_LITTLE_ENDIAN && POWER7_CPU)
select HAVE_IRQ_EXIT_ON_IRQ_STACK
select HAVE_KERNEL_GZIP
select HAVE_KPROBES
select HAVE_OPTPROBES if PPC64
select HAVE_ARCH_KGDB
select HAVE_KRETPROBES
select HAVE_ARCH_TRACEHOOK
select HAVE_LIVEPATCH if HAVE_DYNAMIC_FTRACE_WITH_REGS
select HAVE_MEMBLOCK
select HAVE_MEMBLOCK_NODE_MAP
select HAVE_DMA_API_DEBUG
select HAVE_MOD_ARCH_SPECIFIC
select HAVE_NMI if PERF_EVENTS
select HAVE_OPROFILE
select HAVE_DEBUG_KMEMLEAK
select ARCH_HAS_SG_CHAIN
select GENERIC_ATOMIC64 if PPC32
select HAVE_OPTPROBES if PPC64
select HAVE_PERF_EVENTS
select HAVE_PERF_EVENTS_NMI if PPC64
select HAVE_PERF_REGS
select HAVE_PERF_USER_STACK_DUMP
select HAVE_RCU_TABLE_FREE if SMP
select HAVE_REGS_AND_STACK_ACCESS_API
select HAVE_HW_BREAKPOINT if PERF_EVENTS && (PPC_BOOK3S || PPC_8xx)
select ARCH_WANT_IPC_PARSE_VERSION
select SPARSE_IRQ
select HAVE_SYSCALL_TRACEPOINTS
select HAVE_VIRT_CPU_ACCOUNTING
select IRQ_DOMAIN
select GENERIC_IRQ_SHOW
select GENERIC_IRQ_SHOW_LEVEL
select IRQ_FORCED_THREADING
select HAVE_RCU_TABLE_FREE if SMP
select HAVE_SYSCALL_TRACEPOINTS
select HAVE_CBPF_JIT if !PPC64
select HAVE_EBPF_JIT if PPC64
select HAVE_ARCH_JUMP_LABEL
select ARCH_HAVE_NMI_SAFE_CMPXCHG
select ARCH_HAS_GCOV_PROFILE_ALL
select GENERIC_SMP_IDLE_THREAD
select GENERIC_CMOS_UPDATE
select GENERIC_TIME_VSYSCALL_OLD
select GENERIC_CLOCKEVENTS
select GENERIC_CLOCKEVENTS_BROADCAST if SMP
select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
select GENERIC_STRNCPY_FROM_USER
select GENERIC_STRNLEN_USER
select HAVE_MOD_ARCH_SPECIFIC
select MODULES_USE_ELF_RELA
select CLONE_BACKWARDS
select ARCH_USE_BUILTIN_BSWAP
select OLD_SIGSUSPEND
select OLD_SIGACTION if PPC32
select HAVE_DEBUG_STACKOVERFLOW
select HAVE_IRQ_EXIT_ON_IRQ_STACK
select ARCH_USE_CMPXCHG_LOCKREF if PPC64
select HAVE_ARCH_AUDITSYSCALL
select ARCH_SUPPORTS_ATOMIC_RMW
select DCACHE_WORD_ACCESS if PPC64 && CPU_LITTLE_ENDIAN
select NO_BOOTMEM
select HAVE_GENERIC_RCU_GUP
select HAVE_PERF_EVENTS_NMI if PPC64
select HAVE_NMI if PERF_EVENTS
select EDAC_SUPPORT
select EDAC_ATOMIC_SCRUB
select ARCH_HAS_DMA_SET_COHERENT_MASK
select ARCH_HAS_DEVMEM_IS_ALLOWED
select HAVE_ARCH_SECCOMP_FILTER
select ARCH_HAS_UBSAN_SANITIZE_ALL
select ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT
select HAVE_LIVEPATCH if HAVE_DYNAMIC_FTRACE_WITH_REGS
select GENERIC_CPU_AUTOPROBE
select HAVE_VIRT_CPU_ACCOUNTING
select ARCH_HAS_SCALED_CPUTIME if VIRT_CPU_ACCOUNTING_NATIVE
select HAVE_ARCH_HARDENED_USERCOPY
select HAVE_KERNEL_GZIP
select HAVE_CONTEXT_TRACKING if PPC64
select OF
select OF_EARLY_FLATTREE
select OF_RESERVED_MEM
select OLD_SIGACTION if PPC32
select OLD_SIGSUSPEND
select SPARSE_IRQ
select SYSCTL_EXCEPTION_TRACE
select VIRT_TO_BUS if !PPC64
#
# Please keep this list sorted alphabetically.
#
config GENERIC_CSUM
def_bool n
......
......@@ -72,8 +72,15 @@ GNUTARGET := powerpc
MULTIPLEWORD := -mmultiple
endif
cflags-$(CONFIG_CPU_BIG_ENDIAN) += $(call cc-option,-mbig-endian)
ifdef CONFIG_PPC64
cflags-$(CONFIG_CPU_BIG_ENDIAN) += $(call cc-option,-mabi=elfv1)
cflags-$(CONFIG_CPU_BIG_ENDIAN) += $(call cc-option,-mcall-aixdesc)
aflags-$(CONFIG_CPU_BIG_ENDIAN) += $(call cc-option,-mabi=elfv1)
aflags-$(CONFIG_CPU_LITTLE_ENDIAN) += -mabi=elfv2
endif
cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += -mlittle-endian
cflags-$(CONFIG_CPU_BIG_ENDIAN) += $(call cc-option,-mbig-endian)
ifneq ($(cc-name),clang)
cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += -mno-strict-align
endif
......@@ -113,7 +120,9 @@ ifeq ($(CONFIG_CPU_LITTLE_ENDIAN),y)
CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mabi=elfv2,$(call cc-option,-mcall-aixdesc))
AFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mabi=elfv2)
else
CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mabi=elfv1)
CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mcall-aixdesc)
AFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mabi=elfv1)
endif
CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mcmodel=medium,$(call cc-option,-mminimal-toc))
CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mno-pointers-to-nested-functions)
......
......@@ -112,7 +112,7 @@ static inline __wsum csum_add(__wsum csum, __wsum addend)
#ifdef __powerpc64__
res += (__force u64)addend;
return (__force __wsum)((u32)res + (res >> 32));
return (__force __wsum) from64to32(res);
#else
asm("addc %0,%0,%1;"
"addze %0,%0;"
......
......@@ -70,8 +70,8 @@ static inline void report_invalid_psscr_val(u64 psscr_val, int err)
std r0,0(r1); \
ptesync; \
ld r0,0(r1); \
1: cmpd cr0,r0,r0; \
bne 1b; \
236: cmpd cr0,r0,r0; \
bne 236b; \
IDLE_INST; \
#define IDLE_STATE_ENTER_SEQ_NORET(IDLE_INST) \
......
......@@ -144,8 +144,8 @@ extern int arch_setup_additional_pages(struct linux_binprm *bprm,
#define ARCH_DLINFO_CACHE_GEOMETRY \
NEW_AUX_ENT(AT_L1I_CACHESIZE, ppc64_caches.l1i.size); \
NEW_AUX_ENT(AT_L1I_CACHEGEOMETRY, get_cache_geometry(l1i)); \
NEW_AUX_ENT(AT_L1D_CACHESIZE, ppc64_caches.l1i.size); \
NEW_AUX_ENT(AT_L1D_CACHEGEOMETRY, get_cache_geometry(l1i)); \
NEW_AUX_ENT(AT_L1D_CACHESIZE, ppc64_caches.l1d.size); \
NEW_AUX_ENT(AT_L1D_CACHEGEOMETRY, get_cache_geometry(l1d)); \
NEW_AUX_ENT(AT_L2_CACHESIZE, ppc64_caches.l2.size); \
NEW_AUX_ENT(AT_L2_CACHEGEOMETRY, get_cache_geometry(l2)); \
NEW_AUX_ENT(AT_L3_CACHESIZE, ppc64_caches.l3.size); \
......
......@@ -230,7 +230,7 @@ static inline int hugepd_ok(hugepd_t hpd)
return ((hpd_val(hpd) & 0x4) != 0);
#else
/* We clear the top bit to indicate hugepd */
return ((hpd_val(hpd) & PD_HUGE) == 0);
return (hpd_val(hpd) && (hpd_val(hpd) & PD_HUGE) == 0);
#endif
}
......
......@@ -284,6 +284,13 @@
#define PPC_INST_BRANCH_COND 0x40800000
#define PPC_INST_LBZCIX 0x7c0006aa
#define PPC_INST_STBCIX 0x7c0007aa
#define PPC_INST_LWZX 0x7c00002e
#define PPC_INST_LFSX 0x7c00042e
#define PPC_INST_STFSX 0x7c00052e
#define PPC_INST_LFDX 0x7c0004ae
#define PPC_INST_STFDX 0x7c0005ae
#define PPC_INST_LVX 0x7c0000ce
#define PPC_INST_STVX 0x7c0001ce
/* macros to insert fields into opcodes */
#define ___PPC_RA(a) (((a) & 0x1f) << 16)
......
......@@ -160,12 +160,18 @@ struct of_drconf_cell {
#define OV5_PFO_HW_ENCR 0x1120 /* PFO Encryption Accelerator */
#define OV5_SUB_PROCESSORS 0x1501 /* 1,2,or 4 Sub-Processors supported */
#define OV5_XIVE_EXPLOIT 0x1701 /* XIVE exploitation supported */
#define OV5_MMU_RADIX_300 0x1880 /* ISA v3.00 radix MMU supported */
#define OV5_MMU_HASH_300 0x1840 /* ISA v3.00 hash MMU supported */
#define OV5_MMU_SEGM_RADIX 0x1820 /* radix mode (no segmentation) */
#define OV5_MMU_PROC_TBL 0x1810 /* hcall selects SLB or proc table */
#define OV5_MMU_SLB 0x1800 /* always use SLB */
#define OV5_MMU_GTSE 0x1808 /* Guest translation shootdown */
/* MMU Base Architecture */
#define OV5_MMU_SUPPORT 0x18C0 /* MMU Mode Support Mask */
#define OV5_MMU_HASH 0x1800 /* Hash MMU Only */
#define OV5_MMU_RADIX 0x1840 /* Radix MMU Only */
#define OV5_MMU_EITHER 0x1880 /* Hash or Radix Supported */
#define OV5_MMU_DYNAMIC 0x18C0 /* Hash or Radix Can Switch Later */
#define OV5_NMMU 0x1820 /* Nest MMU Available */
/* Hash Table Extensions */
#define OV5_HASH_SEG_TBL 0x1980 /* In Memory Segment Tables Available */
#define OV5_HASH_GTSE 0x1940 /* Guest Translation Shoot Down Avail */
/* Radix Table Extensions */
#define OV5_RADIX_GTSE 0x1A40 /* Guest Translation Shoot Down Avail */
/* Option Vector 6: IBM PAPR hints */
#define OV6_LINUX 0x02 /* Linux is our OS */
......
......@@ -276,19 +276,21 @@ power_enter_stop:
*/
andis. r4,r3,PSSCR_EC_ESL_MASK_SHIFTED
clrldi r3,r3,60 /* r3 = Bits[60:63] = Requested Level (RL) */
bne 1f
bne .Lhandle_esl_ec_set
IDLE_STATE_ENTER_SEQ(PPC_STOP)
li r3,0 /* Since we didn't lose state, return 0 */
b pnv_wakeup_noloss
.Lhandle_esl_ec_set:
/*
* Check if the requested state is a deep idle state.
*/
1: LOAD_REG_ADDRBASE(r5,pnv_first_deep_stop_state)
LOAD_REG_ADDRBASE(r5,pnv_first_deep_stop_state)
ld r4,ADDROFF(pnv_first_deep_stop_state)(r5)
cmpd r3,r4
bge 2f
bge .Lhandle_deep_stop
IDLE_STATE_ENTER_SEQ_NORET(PPC_STOP)
2:
.Lhandle_deep_stop:
/*
* Entering deep idle state.
* Clear thread bit in PACA_CORE_IDLE_STATE, save SPRs to
......
......@@ -168,6 +168,14 @@ static unsigned long __initdata prom_tce_alloc_start;
static unsigned long __initdata prom_tce_alloc_end;
#endif
static bool __initdata prom_radix_disable;
struct platform_support {
bool hash_mmu;
bool radix_mmu;
bool radix_gtse;
};
/* Platforms codes are now obsolete in the kernel. Now only used within this
* file and ultimately gone too. Feel free to change them if you need, they
* are not shared with anything outside of this file anymore
......@@ -626,6 +634,12 @@ static void __init early_cmdline_parse(void)
prom_memory_limit = ALIGN(prom_memory_limit, 0x1000000);
#endif
}
opt = strstr(prom_cmd_line, "disable_radix");
if (opt) {
prom_debug("Radix disabled from cmdline\n");
prom_radix_disable = true;
}
}
#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
......@@ -695,6 +709,8 @@ struct option_vector5 {
u8 byte22;
u8 intarch;
u8 mmu;
u8 hash_ext;
u8 radix_ext;
} __packed;
struct option_vector6 {
......@@ -850,8 +866,9 @@ struct ibm_arch_vec __cacheline_aligned ibm_architecture_vec = {
.reserved3 = 0,
.subprocessors = 1,
.intarch = 0,
.mmu = OV5_FEAT(OV5_MMU_RADIX_300) | OV5_FEAT(OV5_MMU_HASH_300) |
OV5_FEAT(OV5_MMU_PROC_TBL) | OV5_FEAT(OV5_MMU_GTSE),
.mmu = 0,
.hash_ext = 0,
.radix_ext = 0,
},
/* option vector 6: IBM PAPR hints */
......@@ -990,6 +1007,92 @@ static int __init prom_count_smt_threads(void)
}
static void __init prom_parse_mmu_model(u8 val,
struct platform_support *support)
{
switch (val) {
case OV5_FEAT(OV5_MMU_DYNAMIC):
case OV5_FEAT(OV5_MMU_EITHER): /* Either Available */
prom_debug("MMU - either supported\n");
support->radix_mmu = !prom_radix_disable;
support->hash_mmu = true;
break;
case OV5_FEAT(OV5_MMU_RADIX): /* Only Radix */
prom_debug("MMU - radix only\n");
if (prom_radix_disable) {
/*
* If we __have__ to do radix, we're better off ignoring
* the command line rather than not booting.
*/
prom_printf("WARNING: Ignoring cmdline option disable_radix\n");
}
support->radix_mmu = true;
break;
case OV5_FEAT(OV5_MMU_HASH):
prom_debug("MMU - hash only\n");
support->hash_mmu = true;
break;
default:
prom_debug("Unknown mmu support option: 0x%x\n", val);
break;
}
}
static void __init prom_parse_platform_support(u8 index, u8 val,
struct platform_support *support)
{
switch (index) {
case OV5_INDX(OV5_MMU_SUPPORT): /* MMU Model */
prom_parse_mmu_model(val & OV5_FEAT(OV5_MMU_SUPPORT), support);
break;
case OV5_INDX(OV5_RADIX_GTSE): /* Radix Extensions */
if (val & OV5_FEAT(OV5_RADIX_GTSE)) {
prom_debug("Radix - GTSE supported\n");
support->radix_gtse = true;
}
break;
}
}
static void __init prom_check_platform_support(void)
{
struct platform_support supported = {
.hash_mmu = false,
.radix_mmu = false,
.radix_gtse = false
};
int prop_len = prom_getproplen(prom.chosen,
"ibm,arch-vec-5-platform-support");
if (prop_len > 1) {
int i;
u8 vec[prop_len];
prom_debug("Found ibm,arch-vec-5-platform-support, len: %d\n",
prop_len);
prom_getprop(prom.chosen, "ibm,arch-vec-5-platform-support",
&vec, sizeof(vec));
for (i = 0; i < prop_len; i += 2) {
prom_debug("%d: index = 0x%x val = 0x%x\n", i / 2
, vec[i]
, vec[i + 1]);
prom_parse_platform_support(vec[i], vec[i + 1],
&supported);
}
}
if (supported.radix_mmu && supported.radix_gtse) {
/* Radix preferred - but we require GTSE for now */
prom_debug("Asking for radix with GTSE\n");
ibm_architecture_vec.vec5.mmu = OV5_FEAT(OV5_MMU_RADIX);
ibm_architecture_vec.vec5.radix_ext = OV5_FEAT(OV5_RADIX_GTSE);
} else if (supported.hash_mmu) {
/* Default to hash mmu (if we can) */
prom_debug("Asking for hash\n");
ibm_architecture_vec.vec5.mmu = OV5_FEAT(OV5_MMU_HASH);
} else {
/* We're probably on a legacy hypervisor */
prom_debug("Assuming legacy hash support\n");
}
}
static void __init prom_send_capabilities(void)
{
......@@ -997,6 +1100,9 @@ static void __init prom_send_capabilities(void)
prom_arg_t ret;
u32 cores;
/* Check ibm,arch-vec-5-platform-support and fixup vec5 if required */
prom_check_platform_support();
root = call_prom("open", 1, 1, ADDR("/"));
if (root != 0) {
/* We need to tell the FW about the number of cores we support.
......@@ -2993,6 +3099,11 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
*/
prom_check_initrd(r3, r4);
/*
* Do early parsing of command line
*/
early_cmdline_parse();
#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
/*
* On pSeries, inform the firmware about our capabilities
......@@ -3008,11 +3119,6 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
if (of_platform != PLATFORM_POWERMAC)
copy_and_flush(0, kbase, 0x100, 0);
/*
* Do early parsing of command line
*/
early_cmdline_parse();
/*
* Initialize memory management within prom_init
*/
......
......@@ -408,7 +408,10 @@ static void init_cache_info(struct ppc_cache_info *info, u32 size, u32 lsize,
info->line_size = lsize;
info->block_size = bsize;
info->log_block_size = __ilog2(bsize);
if (bsize)
info->blocks_per_page = PAGE_SIZE / bsize;
else
info->blocks_per_page = 0;
if (sets == 0)
info->assoc = 0xffff;
......
......@@ -20,6 +20,7 @@ obj64-y += copypage_64.o copyuser_64.o usercopy_64.o mem_64.o hweight_64.o \
obj64-$(CONFIG_SMP) += locks.o
obj64-$(CONFIG_ALTIVEC) += vmx-helper.o
obj64-$(CONFIG_KPROBES_SANITY_TEST) += test_emulate_step.o
obj-y += checksum_$(BITS).o checksum_wrappers.o
......
......@@ -1799,8 +1799,6 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr)
goto instr_done;
case LARX:
if (regs->msr & MSR_LE)
return 0;
if (op.ea & (size - 1))
break; /* can't handle misaligned */
if (!address_ok(regs, op.ea, size))
......@@ -1823,8 +1821,6 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr)
goto ldst_done;
case STCX:
if (regs->msr & MSR_LE)
return 0;
if (op.ea & (size - 1))
break; /* can't handle misaligned */
if (!address_ok(regs, op.ea, size))
......@@ -1849,8 +1845,6 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr)
goto ldst_done;
case LOAD:
if (regs->msr & MSR_LE)
return 0;
err = read_mem(&regs->gpr[op.reg], op.ea, size, regs);
if (!err) {
if (op.type & SIGNEXT)
......@@ -1862,8 +1856,6 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr)
#ifdef CONFIG_PPC_FPU
case LOAD_FP:
if (regs->msr & MSR_LE)
return 0;
if (size == 4)
err = do_fp_load(op.reg, do_lfs, op.ea, size, regs);
else
......@@ -1872,15 +1864,11 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr)
#endif
#ifdef CONFIG_ALTIVEC
case LOAD_VMX:
if (regs->msr & MSR_LE)
return 0;
err = do_vec_load(op.reg, do_lvx, op.ea & ~0xfUL, regs);
goto ldst_done;
#endif
#ifdef CONFIG_VSX
case LOAD_VSX:
if (regs->msr & MSR_LE)
return 0;
err = do_vsx_load(op.reg, do_lxvd2x, op.ea, regs);
goto ldst_done;
#endif
......@@ -1903,8 +1891,6 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr)
goto instr_done;
case STORE:
if (regs->msr & MSR_LE)
return 0;
if ((op.type & UPDATE) && size == sizeof(long) &&
op.reg == 1 && op.update_reg == 1 &&
!(regs->msr & MSR_PR) &&
......@@ -1917,8 +1903,6 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr)
#ifdef CONFIG_PPC_FPU
case STORE_FP:
if (regs->msr & MSR_LE)
return 0;
if (size == 4)
err = do_fp_store(op.reg, do_stfs, op.ea, size, regs);
else
......@@ -1927,15 +1911,11 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr)
#endif
#ifdef CONFIG_ALTIVEC
case STORE_VMX:
if (regs->msr & MSR_LE)
return 0;
err = do_vec_store(op.reg, do_stvx, op.ea & ~0xfUL, regs);
goto ldst_done;
#endif
#ifdef CONFIG_VSX
case STORE_VSX:
if (regs->msr & MSR_LE)
return 0;
err = do_vsx_store(op.reg, do_stxvd2x, op.ea, regs);
goto ldst_done;
#endif
......
/*
* Simple sanity test for emulate_step load/store instructions.
*
* Copyright IBM Corp. 2016
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#define pr_fmt(fmt) "emulate_step_test: " fmt
#include <linux/ptrace.h>
#include <asm/sstep.h>
#include <asm/ppc-opcode.h>
#define IMM_L(i) ((uintptr_t)(i) & 0xffff)
/*
* Defined with TEST_ prefix so it does not conflict with other
* definitions.
*/
#define TEST_LD(r, base, i) (PPC_INST_LD | ___PPC_RT(r) | \
___PPC_RA(base) | IMM_L(i))
#define TEST_LWZ(r, base, i) (PPC_INST_LWZ | ___PPC_RT(r) | \
___PPC_RA(base) | IMM_L(i))
#define TEST_LWZX(t, a, b) (PPC_INST_LWZX | ___PPC_RT(t) | \
___PPC_RA(a) | ___PPC_RB(b))
#define TEST_STD(r, base, i) (PPC_INST_STD | ___PPC_RS(r) | \
___PPC_RA(base) | ((i) & 0xfffc))
#define TEST_LDARX(t, a, b, eh) (PPC_INST_LDARX | ___PPC_RT(t) | \
___PPC_RA(a) | ___PPC_RB(b) | \
__PPC_EH(eh))
#define TEST_STDCX(s, a, b) (PPC_INST_STDCX | ___PPC_RS(s) | \
___PPC_RA(a) | ___PPC_RB(b))
#define TEST_LFSX(t, a, b) (PPC_INST_LFSX | ___PPC_RT(t) | \
___PPC_RA(a) | ___PPC_RB(b))
#define TEST_STFSX(s, a, b) (PPC_INST_STFSX | ___PPC_RS(s) | \
___PPC_RA(a) | ___PPC_RB(b))
#define TEST_LFDX(t, a, b) (PPC_INST_LFDX | ___PPC_RT(t) | \
___PPC_RA(a) | ___PPC_RB(b))
#define TEST_STFDX(s, a, b) (PPC_INST_STFDX | ___PPC_RS(s) | \
___PPC_RA(a) | ___PPC_RB(b))
#define TEST_LVX(t, a, b) (PPC_INST_LVX | ___PPC_RT(t) | \
___PPC_RA(a) | ___PPC_RB(b))
#define TEST_STVX(s, a, b) (PPC_INST_STVX | ___PPC_RS(s) | \
___PPC_RA(a) | ___PPC_RB(b))
#define TEST_LXVD2X(s, a, b) (PPC_INST_LXVD2X | VSX_XX1((s), R##a, R##b))
#define TEST_STXVD2X(s, a, b) (PPC_INST_STXVD2X | VSX_XX1((s), R##a, R##b))
static void __init init_pt_regs(struct pt_regs *regs)
{
static unsigned long msr;
static bool msr_cached;
memset(regs, 0, sizeof(struct pt_regs));
if (likely(msr_cached)) {
regs->msr = msr;
return;
}
asm volatile("mfmsr %0" : "=r"(regs->msr));
regs->msr |= MSR_FP;
regs->msr |= MSR_VEC;
regs->msr |= MSR_VSX;
msr = regs->msr;
msr_cached = true;
}
static void __init show_result(char *ins, char *result)
{
pr_info("%-14s : %s\n", ins, result);
}
static void __init test_ld(void)
{
struct pt_regs regs;
unsigned long a = 0x23;
int stepped = -1;
init_pt_regs(&regs);
regs.gpr[3] = (unsigned long) &a;
/* ld r5, 0(r3) */
stepped = emulate_step(&regs, TEST_LD(5, 3, 0));
if (stepped == 1 && regs.gpr[5] == a)
show_result("ld", "PASS");
else
show_result("ld", "FAIL");
}
static void __init test_lwz(void)
{
struct pt_regs regs;
unsigned int a = 0x4545;
int stepped = -1;
init_pt_regs(&regs);
regs.gpr[3] = (unsigned long) &a;
/* lwz r5, 0(r3) */
stepped = emulate_step(&regs, TEST_LWZ(5, 3, 0));
if (stepped == 1 && regs.gpr[5] == a)
show_result("lwz", "PASS");
else
show_result("lwz", "FAIL");
}
static void __init test_lwzx(void)
{
struct pt_regs regs;
unsigned int a[3] = {0x0, 0x0, 0x1234};
int stepped = -1;
init_pt_regs(&regs);
regs.gpr[3] = (unsigned long) a;
regs.gpr[4] = 8;
regs.gpr[5] = 0x8765;
/* lwzx r5, r3, r4 */
stepped = emulate_step(&regs, TEST_LWZX(5, 3, 4));
if (stepped == 1 && regs.gpr[5] == a[2])
show_result("lwzx", "PASS");
else
show_result("lwzx", "FAIL");
}
static void __init test_std(void)
{
struct pt_regs regs;
unsigned long a = 0x1234;
int stepped = -1;
init_pt_regs(&regs);
regs.gpr[3] = (unsigned long) &a;
regs.gpr[5] = 0x5678;
/* std r5, 0(r3) */
stepped = emulate_step(&regs, TEST_STD(5, 3, 0));
if (stepped == 1 || regs.gpr[5] == a)
show_result("std", "PASS");
else
show_result("std", "FAIL");
}
static void __init test_ldarx_stdcx(void)
{
struct pt_regs regs;
unsigned long a = 0x1234;
int stepped = -1;
unsigned long cr0_eq = 0x1 << 29; /* eq bit of CR0 */
init_pt_regs(&regs);
asm volatile("mfcr %0" : "=r"(regs.ccr));
/*** ldarx ***/
regs.gpr[3] = (unsigned long) &a;
regs.gpr[4] = 0;
regs.gpr[5] = 0x5678;
/* ldarx r5, r3, r4, 0 */
stepped = emulate_step(&regs, TEST_LDARX(5, 3, 4, 0));
/*
* Don't touch 'a' here. Touching 'a' can do Load/store
* of 'a' which result in failure of subsequent stdcx.
* Instead, use hardcoded value for comparison.
*/
if (stepped <= 0 || regs.gpr[5] != 0x1234) {
show_result("ldarx / stdcx.", "FAIL (ldarx)");
return;
}
/*** stdcx. ***/
regs.gpr[5] = 0x9ABC;
/* stdcx. r5, r3, r4 */
stepped = emulate_step(&regs, TEST_STDCX(5, 3, 4));
/*
* Two possible scenarios that indicates successful emulation
* of stdcx. :
* 1. Reservation is active and store is performed. In this
* case cr0.eq bit will be set to 1.
* 2. Reservation is not active and store is not performed.
* In this case cr0.eq bit will be set to 0.
*/
if (stepped == 1 && ((regs.gpr[5] == a && (regs.ccr & cr0_eq))
|| (regs.gpr[5] != a && !(regs.ccr & cr0_eq))))
show_result("ldarx / stdcx.", "PASS");
else
show_result("ldarx / stdcx.", "FAIL (stdcx.)");
}
#ifdef CONFIG_PPC_FPU
static void __init test_lfsx_stfsx(void)
{
struct pt_regs regs;
union {
float a;
int b;
} c;
int cached_b;
int stepped = -1;
init_pt_regs(&regs);
/*** lfsx ***/
c.a = 123.45;
cached_b = c.b;
regs.gpr[3] = (unsigned long) &c.a;
regs.gpr[4] = 0;
/* lfsx frt10, r3, r4 */
stepped = emulate_step(&regs, TEST_LFSX(10, 3, 4));
if (stepped == 1)
show_result("lfsx", "PASS");
else
show_result("lfsx", "FAIL");
/*** stfsx ***/
c.a = 678.91;
/* stfsx frs10, r3, r4 */
stepped = emulate_step(&regs, TEST_STFSX(10, 3, 4));
if (stepped == 1 && c.b == cached_b)
show_result("stfsx", "PASS");
else
show_result("stfsx", "FAIL");
}
static void __init test_lfdx_stfdx(void)
{
struct pt_regs regs;
union {
double a;
long b;
} c;
long cached_b;
int stepped = -1;
init_pt_regs(&regs);
/*** lfdx ***/
c.a = 123456.78;
cached_b = c.b;
regs.gpr[3] = (unsigned long) &c.a;
regs.gpr[4] = 0;
/* lfdx frt10, r3, r4 */
stepped = emulate_step(&regs, TEST_LFDX(10, 3, 4));
if (stepped == 1)
show_result("lfdx", "PASS");
else
show_result("lfdx", "FAIL");
/*** stfdx ***/
c.a = 987654.32;
/* stfdx frs10, r3, r4 */
stepped = emulate_step(&regs, TEST_STFDX(10, 3, 4));
if (stepped == 1 && c.b == cached_b)
show_result("stfdx", "PASS");
else
show_result("stfdx", "FAIL");
}
#else
static void __init test_lfsx_stfsx(void)
{
show_result("lfsx", "SKIP (CONFIG_PPC_FPU is not set)");
show_result("stfsx", "SKIP (CONFIG_PPC_FPU is not set)");
}
static void __init test_lfdx_stfdx(void)
{
show_result("lfdx", "SKIP (CONFIG_PPC_FPU is not set)");
show_result("stfdx", "SKIP (CONFIG_PPC_FPU is not set)");
}
#endif /* CONFIG_PPC_FPU */
#ifdef CONFIG_ALTIVEC
static void __init test_lvx_stvx(void)
{
struct pt_regs regs;
union {
vector128 a;
u32 b[4];
} c;
u32 cached_b[4];
int stepped = -1;
init_pt_regs(&regs);
/*** lvx ***/
cached_b[0] = c.b[0] = 923745;
cached_b[1] = c.b[1] = 2139478;
cached_b[2] = c.b[2] = 9012;
cached_b[3] = c.b[3] = 982134;
regs.gpr[3] = (unsigned long) &c.a;
regs.gpr[4] = 0;
/* lvx vrt10, r3, r4 */
stepped = emulate_step(&regs, TEST_LVX(10, 3, 4));
if (stepped == 1)
show_result("lvx", "PASS");
else
show_result("lvx", "FAIL");
/*** stvx ***/
c.b[0] = 4987513;
c.b[1] = 84313948;
c.b[2] = 71;
c.b[3] = 498532;
/* stvx vrs10, r3, r4 */
stepped = emulate_step(&regs, TEST_STVX(10, 3, 4));
if (stepped == 1 && cached_b[0] == c.b[0] && cached_b[1] == c.b[1] &&
cached_b[2] == c.b[2] && cached_b[3] == c.b[3])
show_result("stvx", "PASS");
else
show_result("stvx", "FAIL");
}
#else
static void __init test_lvx_stvx(void)
{
show_result("lvx", "SKIP (CONFIG_ALTIVEC is not set)");
show_result("stvx", "SKIP (CONFIG_ALTIVEC is not set)");
}
#endif /* CONFIG_ALTIVEC */
#ifdef CONFIG_VSX
static void __init test_lxvd2x_stxvd2x(void)
{
struct pt_regs regs;
union {
vector128 a;
u32 b[4];
} c;
u32 cached_b[4];
int stepped = -1;
init_pt_regs(&regs);
/*** lxvd2x ***/
cached_b[0] = c.b[0] = 18233;
cached_b[1] = c.b[1] = 34863571;
cached_b[2] = c.b[2] = 834;
cached_b[3] = c.b[3] = 6138911;
regs.gpr[3] = (unsigned long) &c.a;
regs.gpr[4] = 0;
/* lxvd2x vsr39, r3, r4 */
stepped = emulate_step(&regs, TEST_LXVD2X(39, 3, 4));
if (stepped == 1)
show_result("lxvd2x", "PASS");
else
show_result("lxvd2x", "FAIL");
/*** stxvd2x ***/
c.b[0] = 21379463;
c.b[1] = 87;
c.b[2] = 374234;
c.b[3] = 4;
/* stxvd2x vsr39, r3, r4 */
stepped = emulate_step(&regs, TEST_STXVD2X(39, 3, 4));
if (stepped == 1 && cached_b[0] == c.b[0] && cached_b[1] == c.b[1] &&
cached_b[2] == c.b[2] && cached_b[3] == c.b[3])
show_result("stxvd2x", "PASS");
else
show_result("stxvd2x", "FAIL");
}
#else
static void __init test_lxvd2x_stxvd2x(void)
{
show_result("lxvd2x", "SKIP (CONFIG_VSX is not set)");
show_result("stxvd2x", "SKIP (CONFIG_VSX is not set)");
}
#endif /* CONFIG_VSX */
static int __init test_emulate_step(void)
{
test_ld();
test_lwz();
test_lwzx();
test_std();
test_ldarx_stdcx();
test_lfsx_stfsx();
test_lfdx_stfdx();
test_lvx_stvx();
test_lxvd2x_stxvd2x();
return 0;
}
late_initcall(test_emulate_step);
......@@ -356,18 +356,42 @@ static void early_check_vec5(void)
unsigned long root, chosen;
int size;
const u8 *vec5;
u8 mmu_supported;
root = of_get_flat_dt_root();
chosen = of_get_flat_dt_subnode_by_name(root, "chosen");
if (chosen == -FDT_ERR_NOTFOUND)
if (chosen == -FDT_ERR_NOTFOUND) {
cur_cpu_spec->mmu_features &= ~MMU_FTR_TYPE_RADIX;
return;
}
vec5 = of_get_flat_dt_prop(chosen, "ibm,architecture-vec-5", &size);
if (!vec5)
if (!vec5) {
cur_cpu_spec->mmu_features &= ~MMU_FTR_TYPE_RADIX;
return;
if (size <= OV5_INDX(OV5_MMU_RADIX_300) ||
!(vec5[OV5_INDX(OV5_MMU_RADIX_300)] & OV5_FEAT(OV5_MMU_RADIX_300)))
/* Hypervisor doesn't support radix */
}
if (size <= OV5_INDX(OV5_MMU_SUPPORT)) {
cur_cpu_spec->mmu_features &= ~MMU_FTR_TYPE_RADIX;
return;
}
/* Check for supported configuration */
mmu_supported = vec5[OV5_INDX(OV5_MMU_SUPPORT)] &
OV5_FEAT(OV5_MMU_SUPPORT);
if (mmu_supported == OV5_FEAT(OV5_MMU_RADIX)) {
/* Hypervisor only supports radix - check enabled && GTSE */
if (!early_radix_enabled()) {
pr_warn("WARNING: Ignoring cmdline option disable_radix\n");
}
if (!(vec5[OV5_INDX(OV5_RADIX_GTSE)] &
OV5_FEAT(OV5_RADIX_GTSE))) {
pr_warn("WARNING: Hypervisor doesn't support RADIX with GTSE\n");
}
/* Do radix anyway - the hypervisor said we had to */
cur_cpu_spec->mmu_features |= MMU_FTR_TYPE_RADIX;
} else if (mmu_supported == OV5_FEAT(OV5_MMU_HASH)) {
/* Hypervisor only supports hash - disable radix */
cur_cpu_spec->mmu_features &= ~MMU_FTR_TYPE_RADIX;
}
}
void __init mmu_early_init_devtree(void)
......@@ -383,7 +407,7 @@ void __init mmu_early_init_devtree(void)
* even though the ibm,architecture-vec-5 property created by
* skiboot doesn't have the necessary bits set.
*/
if (early_radix_enabled() && !(mfmsr() & MSR_HV))
if (!(mfmsr() & MSR_HV))
early_check_vec5();
if (early_radix_enabled())
......
......@@ -186,6 +186,10 @@ static void __init radix_init_pgtable(void)
*/
register_process_table(__pa(process_tb), 0, PRTB_SIZE_SHIFT - 12);
pr_info("Process table %p and radix root for kernel: %p\n", process_tb, init_mm.pgd);
asm volatile("ptesync" : : : "memory");
asm volatile(PPC_TLBIE_5(%0,%1,2,1,1) : :
"r" (TLBIEL_INVAL_SET_LPID), "r" (0));
asm volatile("eieio; tlbsync; ptesync" : : : "memory");
}
static void __init radix_init_partition_table(void)
......
......@@ -39,8 +39,8 @@ opal_tracepoint_refcount:
BEGIN_FTR_SECTION; \
b 1f; \
END_FTR_SECTION(0, 1); \
ld r12,opal_tracepoint_refcount@toc(r2); \
cmpdi r12,0; \
ld r11,opal_tracepoint_refcount@toc(r2); \
cmpdi r11,0; \
bne- LABEL; \
1:
......
......@@ -91,6 +91,16 @@ static unsigned int icp_opal_get_irq(void)
static void icp_opal_set_cpu_priority(unsigned char cppr)
{
/*
* Here be dragons. The caller has asked to allow only IPI's and not
* external interrupts. But OPAL XIVE doesn't support that. So instead
* of allowing no interrupts allow all. That's still not right, but
* currently the only caller who does this is xics_migrate_irqs_away()
* and it works in that case.
*/
if (cppr >= DEFAULT_PRIORITY)
cppr = LOWEST_PRIORITY;
xics_set_base_cppr(cppr);
opal_int_set_cppr(cppr);
iosync();
......
......@@ -20,6 +20,7 @@
#include <linux/of.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/delay.h>
#include <asm/prom.h>
#include <asm/io.h>
......@@ -198,9 +199,6 @@ void xics_migrate_irqs_away(void)
/* Remove ourselves from the global interrupt queue */
xics_set_cpu_giq(xics_default_distrib_server, 0);
/* Allow IPIs again... */
icp_ops->set_priority(DEFAULT_PRIORITY);
for_each_irq_desc(virq, desc) {
struct irq_chip *chip;
long server;
......@@ -255,6 +253,19 @@ void xics_migrate_irqs_away(void)
unlock:
raw_spin_unlock_irqrestore(&desc->lock, flags);
}
/* Allow "sufficient" time to drop any inflight IRQ's */
mdelay(5);
/*
* Allow IPIs again. This is done at the very end, after migrating all
* interrupts, the expectation is that we'll only get woken up by an IPI
* interrupt beyond this point, but leave externals masked just to be
* safe. If we're using icp-opal this may actually allow all
* interrupts anyway, but that should be OK.
*/
icp_ops->set_priority(DEFAULT_PRIORITY);
}
#endif /* CONFIG_HOTPLUG_CPU */
......
......@@ -114,9 +114,11 @@ int test_harness(int (test_function)(void), char *name)
rc = run_test(test_function, name);
if (rc == MAGIC_SKIP_RETURN_VALUE)
if (rc == MAGIC_SKIP_RETURN_VALUE) {
test_skip(name);
else
/* so that skipped test is not marked as failed */
rc = 0;
} else
test_finish(name, rc);
return rc;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment