wifi: mt76: mt7915: rework tx bytes counting when WED is active

Concurrent binding/non-binding skbs could be handled anywhere which leads
to mixed byte counting, so switch to use PPDU TxS reporting regardless Tx
paths when WED is active.

Fixes: 43eaa368 ("wifi: mt76: add PPDU based TxS support for WED device")
Co-developed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

drivers/net/wireless/mediatek/mt76/mt76_connac_mac.c

@@ -521,8 +521,6 @@ void mt76_connac2_mac_write_txwi(struct mt76_dev *dev, __le32 *txwi,
 		q_idx = wmm_idx * MT76_CONNAC_MAX_WMM_SETS +
 			mt76_connac_lmac_mapping(skb_get_queue_mapping(skb));
 
-		/* counting non-offloading skbs */
-		wcid->stats.tx_bytes += skb->len;
 		/* mt7915 WA only counts WED path */
 		if (is_mt7915(dev) && mtk_wed_device_active(&dev->mmio.wed))
 			wcid->stats.tx_packets++;

drivers/net/wireless/mediatek/mt76/mt7915/init.c

@@ -499,6 +499,12 @@ mt7915_mac_init_band(struct mt7915_dev *dev, u8 band)
 	set = FIELD_PREP(MT_WTBLOFF_TOP_RSCR_RCPI_MODE, 0) |
 	      FIELD_PREP(MT_WTBLOFF_TOP_RSCR_RCPI_PARAM, 0x3);
 	mt76_rmw(dev, MT_WTBLOFF_TOP_RSCR(band), mask, set);
+
+	/* MT_TXD5_TX_STATUS_HOST (MPDU format) has higher priority than
+	 * MT_AGG_ACR_PPDU_TXS2H (PPDU format) even though ACR bit is set.
+	 */
+	if (mtk_wed_device_active(&dev->mt76.mmio.wed))
+		mt76_set(dev, MT_AGG_ACR4(band), MT_AGG_ACR_PPDU_TXS2H);
 }
 
 static void

drivers/net/wireless/mediatek/mt76/mt7915/mmio.c

@@ -545,8 +545,6 @@ static u32 mt7915_rmw(struct mt76_dev *mdev, u32 offset, u32 mask, u32 val)
 static int mt7915_mmio_wed_offload_enable(struct mtk_wed_device *wed)
 {
 	struct mt7915_dev *dev;
-	struct mt7915_phy *phy;
-	int ret;
 
 	dev = container_of(wed, struct mt7915_dev, mt76.mmio.wed);
 
@@ -554,43 +552,19 @@ static int mt7915_mmio_wed_offload_enable(struct mtk_wed_device *wed)
 	dev->mt76.token_size = wed->wlan.token_start;
 	spin_unlock_bh(&dev->mt76.token_lock);
 
-	ret = wait_event_timeout(dev->mt76.tx_wait,
+	return !wait_event_timeout(dev->mt76.tx_wait,
 				   !dev->mt76.wed_token_count, HZ);
-	if (!ret)
-		return -EAGAIN;
-
-	phy = &dev->phy;
-	mt76_set(dev, MT_AGG_ACR4(phy->mt76->band_idx), MT_AGG_ACR_PPDU_TXS2H);
-
-	phy = dev->mt76.phys[MT_BAND1] ? dev->mt76.phys[MT_BAND1]->priv : NULL;
-	if (phy)
-		mt76_set(dev, MT_AGG_ACR4(phy->mt76->band_idx),
-			 MT_AGG_ACR_PPDU_TXS2H);
-
-	return 0;
 }
 
 static void mt7915_mmio_wed_offload_disable(struct mtk_wed_device *wed)
 {
 	struct mt7915_dev *dev;
-	struct mt7915_phy *phy;
 
 	dev = container_of(wed, struct mt7915_dev, mt76.mmio.wed);
 
 	spin_lock_bh(&dev->mt76.token_lock);
 	dev->mt76.token_size = MT7915_TOKEN_SIZE;
 	spin_unlock_bh(&dev->mt76.token_lock);
-
-	/* MT_TXD5_TX_STATUS_HOST (MPDU format) has higher priority than
-	 * MT_AGG_ACR_PPDU_TXS2H (PPDU format) even though ACR bit is set.
-	 */
-	phy = &dev->phy;
-	mt76_clear(dev, MT_AGG_ACR4(phy->mt76->band_idx), MT_AGG_ACR_PPDU_TXS2H);
-
-	phy = dev->mt76.phys[MT_BAND1] ? dev->mt76.phys[MT_BAND1]->priv : NULL;
-	if (phy)
-		mt76_clear(dev, MT_AGG_ACR4(phy->mt76->band_idx),
-			   MT_AGG_ACR_PPDU_TXS2H);
 }
 
 static void mt7915_mmio_wed_release_rx_buf(struct mtk_wed_device *wed)

drivers/net/wireless/mediatek/mt76/tx.c

@@ -121,6 +121,7 @@ int
 mt76_tx_status_skb_add(struct mt76_dev *dev, struct mt76_wcid *wcid,
 		       struct sk_buff *skb)
 {
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	struct mt76_tx_cb *cb = mt76_tx_skb_cb(skb);
 	int pid;
@@ -134,8 +135,14 @@ mt76_tx_status_skb_add(struct mt76_dev *dev, struct mt76_wcid *wcid,
 		return MT_PACKET_ID_NO_ACK;
 
 	if (!(info->flags & (IEEE80211_TX_CTL_REQ_TX_STATUS |
-			     IEEE80211_TX_CTL_RATE_CTRL_PROBE)))
+			     IEEE80211_TX_CTL_RATE_CTRL_PROBE))) {
+		if (mtk_wed_device_active(&dev->mmio.wed) &&
+		    ((info->flags & IEEE80211_TX_CTL_HW_80211_ENCAP) ||
+		     ieee80211_is_data(hdr->frame_control)))
+			return MT_PACKET_ID_WED;
+
 		return MT_PACKET_ID_NO_SKB;
+	}
 
 	spin_lock_bh(&dev->status_lock);