Staging: et131x: fix most coding style issues in et131x

This is a patch to the et131x driver that fixes up almost all coding
style issues
Signed-off-by: Michael Sprecher <sprecher.m@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/et131x/et1310_address_map.h

@@ -1052,7 +1052,7 @@ typedef struct _RXMAC_t {				/* Location: */
  * 4-0: register
  */
 
-#define MII_ADDR(phy,reg)	((phy) << 8 | (reg))
+#define MII_ADDR(phy, reg)	((phy) << 8 | (reg))
 
 /*
  * structure for MII Management Control reg in mac address map.
@@ -1249,8 +1249,7 @@ typedef struct _MAC_t {					/* Location: */
 /*
  * MAC STATS Module of JAGCore Address Mapping
  */
-struct macstat_regs
-{					/* Location: */
+struct macstat_regs {			/* Location: */
 	u32 pad[32];			/*  0x6000 - 607C */
 
 	/* Tx/Rx 0-64 Byte Frame Counter */

drivers/staging/et131x/et1310_eeprom.c

@@ -383,9 +383,9 @@ int et131x_init_eeprom(struct et131x_adapter *etdev)
 
 			/* This error could mean that there was an error
 			 * reading the eeprom or that the eeprom doesn't exist.
-			 * We will treat each case the same and not try to gather
-			 * additional information that normally would come from the
-			 * eeprom, like MAC Address
+			 * We will treat each case the same and not try to
+			 * gather additional information that normally would
+			 * come from the eeprom, like MAC Address
 			 */
 			etdev->has_eeprom = 0;
 			return -EIO;

drivers/staging/et131x/et1310_phy.c

@@ -344,7 +344,7 @@ static void ET1310_PhyDuplexMode(struct et131x_adapter *etdev, u16 duplex)
 static void ET1310_PhySpeedSelect(struct et131x_adapter *etdev, u16 speed)
 {
 	u16 data;
-	static const u16 bits[3]={0x0000, 0x2000, 0x0040};
+	static const u16 bits[3] = {0x0000, 0x2000, 0x0040};
 
 	/* Read the PHY control register */
 	MiRead(etdev, PHY_CONTROL, &data);

drivers/staging/et131x/et1310_rx.c

@@ -344,7 +344,7 @@ int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter)
 			  "Cannot alloc memory for Packet Status Ring\n");
 		return -ENOMEM;
 	}
-	printk("PSR %lx\n", (unsigned long) rx_ring->pPSRingPa);
+	printk(KERN_INFO "PSR %lx\n", (unsigned long) rx_ring->pPSRingPa);
 
 	/*
 	 * NOTE : pci_alloc_consistent(), used above to alloc DMA regions,
@@ -363,7 +363,7 @@ int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter)
 		return -ENOMEM;
 	}
 	rx_ring->NumRfd = NIC_DEFAULT_NUM_RFD;
-	printk("PRS %lx\n", (unsigned long)rx_ring->rx_status_bus);
+	printk(KERN_INFO "PRS %lx\n", (unsigned long)rx_ring->rx_status_bus);
 
 	/* Recv
 	 * pci_pool_create initializes a lookaside list. After successful
@@ -841,8 +841,7 @@ PMP_RFD nic_rx_pkts(struct et131x_adapter *etdev)
 		(rindex == 1 &&
 		bindex > rx_local->Fbr1NumEntries - 1))
 #else
-	if (rindex != 1 ||
-		bindex > rx_local->Fbr1NumEntries - 1)
+	if (rindex != 1 || bindex > rx_local->Fbr1NumEntries - 1)
 #endif
 	{
 		/* Illegal buffer or ring index cannot be used by S/W*/

drivers/staging/et131x/et1310_rx.h

@@ -91,8 +91,7 @@
 #define ALCATEL_BROADCAST_PKT	0x02000000
 
 /* typedefs for Free Buffer Descriptors */
-struct fbr_desc
-{
+struct fbr_desc {
 	u32 addr_lo;
 	u32 addr_hi;
 	u32 word2;		/* Bits 10-31 reserved, 0-9 descriptor */

drivers/staging/et131x/et131x_initpci.c

@@ -113,7 +113,13 @@
 static u32 et131x_speed_set;
 module_param(et131x_speed_set, uint, 0);
 MODULE_PARM_DESC(et131x_speed_set,
-		"Set Link speed and dublex manually (0-5)  [0] \n  1 : 10Mb   Half-Duplex \n  2 : 10Mb   Full-Duplex \n  3 : 100Mb  Half-Duplex \n  4 : 100Mb  Full-Duplex \n  5 : 1000Mb Full-Duplex \n 0 : Auto Speed Auto Dublex");
+		"Set Link speed and dublex manually (0-5)  [0]\n \
+		 1 : 10Mb   Half-Duplex\n \
+		 2 : 10Mb   Full-Duplex\n \
+		 3 : 100Mb  Half-Duplex\n \
+		 4 : 100Mb  Full-Duplex\n \
+		 5 : 1000Mb Full-Duplex\n \
+		 0 : Auto Speed Auto Dublex");
 
 /**
  * et131x_hwaddr_init - set up the MAC Address on the ET1310
@@ -558,7 +564,7 @@ static struct et131x_adapter *et131x_adapter_init(struct net_device *netdev,
 	/* Parse configuration parameters into the private adapter struct */
 	if (et131x_speed_set)
 		dev_info(&etdev->pdev->dev,
-			"Speed set manually to : %d \n", et131x_speed_set);
+			"Speed set manually to : %d\n", et131x_speed_set);
 
 	etdev->SpeedDuplex = et131x_speed_set;
 	etdev->RegistryJumboPacket = 1514;	/* 1514-9216 */

drivers/staging/et131x/et131x_netdev.c

@@ -426,26 +426,22 @@ void et131x_multicast(struct net_device *netdev)
 	 * accordingly
 	 */
 
-	if (netdev->flags & IFF_PROMISC) {
+	if (netdev->flags & IFF_PROMISC)
 		adapter->PacketFilter |= ET131X_PACKET_TYPE_PROMISCUOUS;
-	} else {
+	else
 		adapter->PacketFilter &= ~ET131X_PACKET_TYPE_PROMISCUOUS;
-	}
 
-	if (netdev->flags & IFF_ALLMULTI) {
+	if (netdev->flags & IFF_ALLMULTI)
 		adapter->PacketFilter |= ET131X_PACKET_TYPE_ALL_MULTICAST;
-	}
 
-	if (netdev_mc_count(netdev) > NIC_MAX_MCAST_LIST) {
+	if (netdev_mc_count(netdev) > NIC_MAX_MCAST_LIST)
 		adapter->PacketFilter |= ET131X_PACKET_TYPE_ALL_MULTICAST;
-	}
 
 	if (netdev_mc_count(netdev) < 1) {
 		adapter->PacketFilter &= ~ET131X_PACKET_TYPE_ALL_MULTICAST;
 		adapter->PacketFilter &= ~ET131X_PACKET_TYPE_MULTICAST;
-	} else {
+	} else
 		adapter->PacketFilter |= ET131X_PACKET_TYPE_MULTICAST;
-	}
 
 	/* Set values in the private adapter struct */
 	i = 0;